Tailoring the d-Band Center of WS2 by Metal and Nonmetal Dual-Doping for Enhanced Electrocatalytic Nitrogen Reduction.

Tuning the adsorption energy of nitrogen intermediates and lowering the reaction energy barrier is essential to accelerate the kinetics of nitrogen reduction reaction (NRR), yet remains a great challenge. Herein, the electronic structure of WS2 is tailored based on a metal and nonmetal dual-doping strategy (denoted Fe, F-WS2) to lower the d-band center of W in order to optimize the adsorption of nitrogen intermediates. The obtained Fe, F-WS2 nanosheet catalyst presents a high Faradic efficiency (FE) of 22.42% with a NH3 yield rate of 91.46 µg h-1 mgcat. -1. The in situ characterizations and DFT simulations consistently show the enhanced activity is attributed to the downshift of the d-band center, which contributes to the rate-determining step of the second protonation to form N2H2 * key intermediates, thereby boosting the overall nitrogen electrocatalysis reaction kinetics. This work opens a new avenue to enhanced electrocatalysis by modulating the electronic structure and surrounding microenvironment of the catalytic metal centers.

Ru3@Mo2CO2 MXene single-cluster catalyst for highly efficient N2-to-NH3 conversion.

Single-cluster catalysts (SCCs) representing structurally well-defined metal clusters anchored on support tend to exhibit tunable catalytic performance for complex redox reactions in heterogeneous catalysis. Here we report a theoretical study on an SCC of Ru3@Mo2CO2 MXene for N2-to-NH3 thermal conversion. Our results show that Ru3@Mo2CO2 can effectively activate N2 and promotes its conversion to NH3 through an association mechanism, in which the rate-determining step of NH2* + H* → NH3* has a low energy barrier of 1.29 eV. Notably, with the assistance of Mo2CO2 support, the positively charged Ru3 cluster active site can effectively adsorb and activate N2, leading to 0.74 |e| charge transfer from Ru3@Mo2CO2 to the adsorbed N2. The supported Ru3 also acts as an electron reservoir to regulate the charge transfer for various intermediate steps of ammonia synthesis. Microkinetic analysis shows that the turnover frequency of the N2-to-NH3 conversion on Ru3@Mo2CO2 is as high as 1.45 × 10-2 s-1 site-1 at a selected thermodynamic condition of 48 bar and 700 K, the performance of which even surpasses that of the Ru B5 site and Fe3/θ-Al2O3(010) reported before. Our work provides a theoretical understanding of the high stability and catalytic mechanism of Ru3@Mo2CO2 and guidance for further designing and fabricating MXene-based metal SCCs for ammonia synthesis under mild conditions.

Engineered Electron-Deficient Sites at Boron-Doped Strontium Titanate/Electrolyte Interfaces Accelerate the Electrocatalytic Reduction of N2 to NH3: A Combined DFT and Experimental Electrocatalysis Study.

The development of an efficient, selective, and durable catalysis system for the electrocatalytic N2 reduction reaction (ENRR) is a promising strategy for the sustainable production of ammonia. The high-performance ENRR is limited by two major challenges: poor adsorption of N2 over the catalyst surface and abysmal N2 solubility in aqueous electrolytes. Herein, with the help of our combined density functional theory (DFT) calculations and experimental electrocatalysis study, we demonstrate that concurrently induced electron-deficient Lewis acid sites in an electrocatalyst and in an electrolyte medium can significantly boost the ENRR performance. The DFT calculations, ex situ X-ray photoelectron and FTIR spectroscopy, electrochemical measurements, and N2-TPD (temperature-programmed desorption) over boron-doped strontium titanate (BSTO) samples reveal that the Lewis acid-base interactions of N2 synergistically enhance the adsorption and activation of N2. Besides, the B-dopant induces the defect sites (oxygen vacancies and Ti3+) that assist in enhanced N2 adsorption and results in suppressed hydrogen evolution due to B-induced electron-deficient sites for H+ adsorption. The insights from the DFT study evince that B prefers the Srtop position (on top of Sr) where N2 adsorbs in an end-on configuration, which favors the associative alternating pathway and suppresses the competitive hydrogen evolution. Thus, our combined experimental and DFT study demonstrates an insight toward enhancing the ENRR performance along with the suppressed hydrogen evolution via concurrently engineered electron-deficient sites at electrode and electrolyte interfaces.

Unraveling the Active Sites on Mesoporous CuFe2O4@N-Carbon Catalysts with Abundant Oxygen Vacancies and M-N-C Content for Boosted Nitrogen Reduction Toward Electrosynthesis of Ammonia.

Transition metal centers dispersed over nitrogen-doped carbon (M-NC) supports have been widely explored for electrocatalytic reactions; however, sparsely reported for electrochemical nitrogen reduction reaction (ENRR). Particularly, the single-atom catalysts (SACs) have shown reasonable ammonia yield rate and faradaic efficiency (FE), but their complex synthesis and low durability for long-term electrocatalysis runs restrict their use on a larger scale. Importantly, the catalytic active sites in metal nanostructured-based M-NC catalysts toward enhanced N2 adsorption and activation are still not clear as they are highly challenging to reveal. A few studies have predicted that the surface oxygen vacancies (Ovac) favor an enhanced ENRR performance. Herein, a strategy using tailored M-NC content and Ovac in a single catalyst for enhanced ammonia electrosynthesis is devised. A mesoporous bimetallic spinel oxide (CuFe2O4) supported over N-doped carbon (CuFe2O4@NC) derived from Prussian blue analog (PBA) via controlled pyrolysis possess is found to show boosted ENRR activity. Moreover, operando NH3 formation over the catalyst is observed using four electrode set up. This approach enables rapid evaluation ofelectrocatalytic efficacy and avoids false positive results. The rotating disc electrode results reveal that mass transport in acidic media and surface absorption in alkline media primarily regulate ENRR over CuFe2O4@NC electrocatalyst.

Hydrophobic Microenvironment Modulation of Ru Nanoparticles in Metal-Organic Frameworks for Enhanced Electrocatalytic N2 Reduction.

The modulation of the chemical microenvironment surrounding metal nanoparticles (NPs) is an effective means to enhance the selectivity and activity of catalytic reactions. Herein, a post-synthetic modification strategy is developed to modulate the hydrophobic microenvironment of Ru nanoparticles encapsulated in a metal-organic framework (MOF), MIP-206, namely Ru@MIP-Fx (where x represents perfluoroalkyl chain lengths of 3, 5, 7, 11, and 15), in order to systematically explore the effect of the hydrophobic microenvironment on the electrocatalytic activity. The increase of perfluoroalkyl chain length can gradually enhance the hydrophobicity of the catalyst, which effectively suppresses the competitive hydrogen evolution reaction (HER). Moreover, the electrocatalytic production rate of ammonia and the corresponding Faraday efficiency display a volcano-like pattern with increasing hydrophobicity, with Ru@MIP-F7 showing the highest activity. Theoretical calculations and experiments jointly show that modification of perfluoroalkyl chains of different lengths on MIP-206 modulates the electronic state of Ru nanoparticles and reduces the rate-determining step for the formation of the key intermediate of N2H2 *, leading to superior electrocatalytic performance.

N2 Functionalization via Molybdenum-Nitride Complex: Stepwise BH Bond Additions.

Reactivity of (triphosphine)MoIV-nitrido complex generated by N2 splitting, toward boranes is reported. The simple adduct Mo≡N→BH3 is observed with BH3.SMe2 while 1,2 addition is evidenced with 9-BBN leading to H-Mo=NBR2. A second addition of BH3.SMe2 is facile and forms an unprecedented complex featuring two bridging H between two B and the Mo centers. Addition of PMe3 or BH3.SMe2 promotes reductive elimination and N-H bond formation. The full sequence of functionalization at Mo≡N obtained after N2 splitting is therefore evidenced in this work.

In-situ assembling novel N-Ti3C2/BiOClxBr1-x composites with enhanced photocatalytic degradation and nitrogen reduction activity.

Herein, a collection of novel N-Ti3C2/BiOClxBr1-x composites are fabricated via a simple in-situ sonochemical process. Not only the preparation method for N-Ti3C2 but also the photocatalytic system of N-Ti3C2/BiOClxBr1-x are firstly developed. Multiple characterizations jointly demonstrate the successful fabrication of the composites. Compared to that of BiOClxBr1-x, the maximum improvements of 1.16, 1.25 and 1.26 folds are severally confirmed for the photocatalytic degradation of levofloxacin, Rhodamine B, and methylene blue over N-Ti3C2/BiOClxBr1-x composites. In addition, through radicals trapping tests, the primary active species in photocatalytic degradation process are verified to be O2-. Moreover, N-Ti3C2/BiOClxBr1-x composites also exhibit 1.18 and 1.14 times enhancements for NH3 production compared with that of BiOClxBr1-x with or without the presence of methanol, respectively. In addition, the maximum improvements of photo-current and photo-potential for BiOClxBr1-x are 1.29 and 1.86 folds with the introduction of N-Ti3C2, respectively. The enhanced photocatalytic activity of N-Ti3C2/BiOClxBr1-x composites is owing to the heightened light absorption, increased specific surface area, and accelerated separation of photoinduced carriers. Additionally, the stable photocatalytic properties of N-Ti3C2/BiOClxBr1-x are confirmed by three photocatalytic recycle tests on pollutant degradation and nitrogen reduction combined with X-ray diffraction patterns before and after three recycles. This study suggests that N-Ti3C2 is an efficient ornamentation for boosting photocatalytic activity ofBiOClxBr1-x, which can also be expanded as a promising modifier for other semiconductors.

Pathway toward Scalable Energy-Efficient Li-Mediated Ammonia Synthesis.

Lithium-mediated ammonia synthesis (LiMAS) is an emerging electrochemical method for NH3 production, featuring a meticulous three-step process involving Li+ electrodeposition, Li nitridation, and Li3N protolysis. The essence lies in the electrodeposition of Li+, a critical phase demanding current oscillations to fortify the solid-electrolyte interface (SEI) and ensure voltage stability. This distinctive operational cadence orchestrates Li nitridation and Li3N protolysis, profoundly influencing the NH3 selectivity. Increasing N2 pressure enhances the NH3 faradaic efficiency (FE) up to 20 bar, beyond which proton availability controls selectivity between Li nitridation and Li3N protolysis. The proton donor, typically alcohols, is a key factor, with 1-butanol observed to yield the highest NH3 FE. Counterion in the Li salt is also observed to be significant, with larger anions (e.g., exemplified by BF4-) improving SEI stability, directly impacting LiMAS efficacy. Notably, we report a peak NH3 FE of ∼70% and an NH3 current density of ∼-100 mA/cm2 via a delicate balance of process conditions, encompassing N2 pressure, proton donor, Li salt, and their respective concentrations. In contrast to the recent literature, we find that the theoretical maximum energy efficiency of LiMAS hinges significantly on the proton source, with LiMAS utilizing H2O calculated to have a maximum achievable energy efficiency of 27.8%. Despite inherent challenges, a technoeconomic analysis suggests high-pressure LiMAS to be more feasible than both ambient LiMAS and a modified green Haber-Bosch process. Our analysis finds that, at a 100 mA/cm2 NH3 current density and a 6 V cell voltage, LiMAS delivers green NH3 at an all-inclusive cost of $456 per ton, significantly lower than conventional cost barriers. Our economic analysis underscores high-pressure LiMAS as a potentially transformative technology that may revolutionize large-scale NH3 production, paving the way for a sustainable future.

Enhanced Microbial Protein Production from CO2 and Air by a MoS2 Catalyzed Bioelectrochemical System.

Carbon dioxide can be relatively easily reduced to organic matter in a bioelectrochemical system (BES). However, due to insufficient reduction force from in-situ hydrogen evolution, it is difficult for nitrogen reduction. In this study, MoS2 was firstly used as an electrocatalyst for the simultaneous reduction of CO2 and N2 to produce microbial protein (MP) in a BES. Cell dry weight (CDW) could reach 0.81±0.04 g/L after 14 d operation at -0.7 V (vs. RHE), which was 108±3 % higher than that from non-catalyst control group (0.39±0.01 g/L). The produced protein had a better amino acid profile in the BES than that in a direct hydrogen system (DHS), particularly for proline (Pro). Besides, MoS2 promoted the growth of bacterial cell on an electrode and improved the biofilm extracellular electron transfer (EET) by microscopic observation and electrochemical characterization of MoS2 biocathode. The composition of the microbial community and the relative abundance of functional enzymes revealed that MoS2 as an electrocatalyst was beneficial for enriching Xanthobacter and enhancing CO2 and N2 reduction by electrical energy. These results demonstrated that an efficient strategy to improve MP production of BES is to use MoS2 as an electrocatalyst to shift amino acid profile and microbial community.

N2 reduction to NH3 on surfaces of Co-Al18P18, Ni-Al21N21, Fe-B24N24, Mn-B27P27, Ti-C60 and Cu-Si72 catalysts.

CONTEXT: The abilities of Co-Al18P18, Ni-Al21N21, Fe-B24N24, Mn-B27P27, Ti-C60 and Cu-Si72 as catalysts for N2-RR to create the NH3 are investigated by theoretical levels. The ∆Eadoption and ∆Eformation of Co-Al18P18, Ni-Al21N21, Fe-B24N24, Mn-B27P27, Ti-C60 and Cu-Si72 are investigated. The ∆Eadsorption of N2-RR intermediates and ΔGreaction of reaction steps of N2-RR on Co-Al18P18, Ni-Al21N21, Fe-B24N24, Mn-B27P27, Ti-C60 and Cu-Si72 are examined. In acceptable mechanisms, the *NN → *NNH step is potential limiting step and *NN → *NNH step in enzymatic mechanism is endothermic reaction. The ∆Greaction of *NHNH2 → *NH2NH2 step on Co-Al18P18, Ni-Al21N21, Fe-B24N24, Mn-B27P27, Ti-C60 and Cu-Si72 are -0.904, -0.928, -0.860, -0.882, -0.817 and -0.838 eV, respectively. The Co-Al18P18 and Ni-Al21N21 have the highest ∆Greaction values for reaction steps of N2-RR. Finally, it can be concluded that the Co-Al18P18, Ni-Al21N21, Fe-B24N24 and Mn-B27P2 have acceptable potential for N2-RR by acceptable pathways. METHODS: The structures of Co-Al18P18, Ni-Al21N21, Fe-B24N24, Mn-B27P27, Ti-C60 and Cu-Si72 and N2-RR intermediates are optimized by PW91PW91/6-311+G (2d, 2p) and M06-2X/cc-pVQZ as theoretical levels in GAMESS software. The convergence for force set displacement of Co-Al18P18, Ni-Al21N21, Fe-B24N24, Mn-B27P27, Ti-C60 and Cu-Si72 and N2-RR intermediates are 1.5 × 105 Hartree/Bohr and 6.0 × 10-5 Angstrom. The Opt = Tight and MaxStep = 30 are considered to optimize Co-Al18P18, Ni-Al21N21, Fe-B24N24, Mn-B27P27, Ti-C60 and Cu-Si72 and N2-RR intermediates. The frequencies of Co-Al18P18, Ni-Al21N21, Fe-B24N24, Mn-B27P27, Ti-C60 and Cu-Si72 and N2-RR intermediates are calculated.

Current Status and Perspectives of Dual-Atom Catalysts Towards Sustainable Energy Utilization.

The exploration of sustainable energy utilization requires the implementation of advanced electrochemical devices for efficient energy conversion and storage, which are enabled by the usage of cost-effective, high-performance electrocatalysts. Currently, heterogeneous atomically dispersed catalysts are considered as potential candidates for a wide range of applications. Compared to conventional catalysts, atomically dispersed metal atoms in carbon-based catalysts have more unsaturated coordination sites, quantum size effect, and strong metal-support interactions, resulting in exceptional catalytic activity. Of these, dual-atomic catalysts (DACs) have attracted extensive attention due to the additional synergistic effect between two adjacent metal atoms. DACs have the advantages of full active site exposure, high selectivity, theoretical 100% atom utilization, and the ability to break the scaling relationship of adsorption free energy on active sites. In this review, we summarize recent research advancement of DACs, which includes (1) the comprehensive understanding of the synergy between atomic pairs; (2) the synthesis of DACs; (3) characterization methods, especially aberration-corrected scanning transmission electron microscopy and synchrotron spectroscopy; and (4) electrochemical energy-related applications. The last part focuses on great potential for the electrochemical catalysis of energy-related small molecules, such as oxygen reduction reaction, CO2 reduction reaction, hydrogen evolution reaction, and N2 reduction reaction. The future research challenges and opportunities are also raised in prospective section.

Screening Efficient C-N Coupling Catalysts for Electrosynthesis of Acetamide and Output Ammonia through a Cascade Strategy of Electrochemical CO2 and N2 Reduction Using Cu-Based Nitrogen-Carbon Nanosheets.

Due to the limitation of the high-value-added products obtained from electrocatalytic CO2 reduction within an acid environment, introducing additional elements can expand the diversity of the products obtained during the CO2 reduction reaction (CO2RR) and nitrogen reduction reaction (NRR). Thus, coelectroreduction of CO2 and N2 is a new strategy for producing acetamide (CH3CONH2) via both C-C and C-N bond coupling using Cu-based nitrogen-carbon nanosheets. CO2 can reduce to CO, and a key ketene (*C═C═O) can be generated from *CO*CO dimerization; this ketene is postulated as an intermediate in the formation of acetamide. However, most studies focus on promoting the C-C bond formation. Here, we propose that C-N bond coupling can form acetamide through the interaction of *C═C═O with NH3. The acetamide is formed via a nucleophilic attack between *NH3 and the *C═C═O intermediate. The C-N coupling mechanism was successfully applied to expand the variety of nitrogen-containing products obtained from CO2 and N2 coreduction. Thus, we successfully screened Cu2-based graphite and Cu-based C3N4 as catalysts that can produce C2+ compounds by integrating CO dimerization with acetamide synthesis. In addition, we observed that Cu2-based C2N and Cu-based C3N4 catalysts are suitable for the NRR. Cu-based C3N4 showed high CO2RR and NRR activities with small negative limiting potential (UL) values of -0.83 and -0.58 V compared to those of other candidates, respectively. The formation of *COHCOH from *COHCO was considered the rate-determining step (RDS) during acetamide electrosynthesis. The limiting potential value of Cu2-based C2N was only -0.46 V for NH3 synthesis, and the formation of *NNH was via the RDS via an alternating path. The adsorption energy difference analysis both CO2 and N2 compare with the hydrogen evolution reaction (HER), suggesting that Cu2-based C2N exhibited the highest CO2RR and NRR selectivity among the 13 analyzed catalysts. The results of this study provide innovative insights into the design principle of Cu-based nitrogen-carbon electrocatalysts for generating highly efficient C-N coupling products.

Fabrication of Ultrafine Cu2 O Nanoparticles on W18 O49 Ultra-Thin Nanowires by In-Situ Reduction for Highly Efficient Photocatalytic Nitrogen Fixation.

Photocatalytic ammonia synthesis technology is one of the important methods to achieve green ammonia synthesis. Herein, two samples of Cu ion-doped W18 O49 with different morphologies, ultra-thin nanowires (Cu-W18 O49 -x UTNW) and sea urchin-like microspheres (Cu-W18 O49 -x SUMS), are synthesized by a simple solvothermal method. Subsequently, Cu2 O-W18 O49 -x UTNW/SUMS is synthesized by in situ reduction, where the NH3 production rate of Cu2 O-W18 O49 -30 UTNW is 252.4 µmol g-1  h-1 without sacrificial reagents, which is 11.8 times higher than that of the pristine W18 O49 UTNW. The Cu2 O-W18 O49 -30 UTNW sample is rich in oxygen vacancies, which promotes the chemisorption and activation of N2 molecules and makes the N≡N bond easier to dissociate by proton coupling. In addition, the in situ reduction-generated Cu2 O nanoparticles exhibit ideal S-scheme heterojunctions with W18 O49 UTNW, which enhances the internal electric field strength and improves the separation and transfer efficiency of the photogenerated carriers. Therefore, this study provides a new idea for the design of efficient nitrogen fixation photocatalysis.

Breaking linear scaling relations by strain engineering on MXene for boosting N2 electroreduction.

The development of N2 reduction reaction (NRR) electrocatalysts with excellent activity and selectivity is of great significance, but adsorption-energy linear scaling relations between reaction intermediates severely hamper the realization of this aspiration. Here, we propose an elegant strain engineering strategy to break the linear relations in NRR to promote catalytic activity and selectivity. Our results show that the N-N bond lengths of adsorbed N2 with side-on and end-on configurations exhibit opposite variations under strains, which is illuminated by establishing two different N2 activation mechanisms of "P-P" (Pull-Pull) and "E-E" (Electron-Electron). Then, we highlight that strain engineering can break the linear scaling relations in NRR, selectively optimizing the adsorption of key NH2NH2** and NH2* intermediates to realize a lower limiting potential (UL). Particularly, the catalytic activity-selectivity trade-off of NRR on MXene can be circumvented, resulting in a low UL of -0.25 V and high Faraday efficiency (FE), which is further elucidated to originate from the strain-modulated electronic structures. Last but not least, the catalytic sustainability of MXene under strain has been guaranteed. This work not only provides fundamental insights into the strain effect on catalysis but also pioneers a new avenue toward the rational design of superior NRR catalysts.

Double metals sites synergistically enhanced photocatalytic N2 fixation performance over Bi24O31Br10@Bi/Ti3C2Tx Ohm junctions.

At present, it is a research hotspot to realize green synthetic ammonia by using solar energy. Exploring cheap and efficient co-catalysts for enhancing the performance of photocatalysts is a challenge in the field of energy conversion. In order to boost the charge separation/transfer of the photocatalyst and widen the visible light absorption, Bi24O31Br10@Bi/Ti3C2Tx with double Ohm junction is successfully fabricated by in situ growth of metal Bi and loading Ti3C2Tx MXene on the surface of Bi24O31Br10. The dual active sites of Bi and Ti3C2Tx MXene not only broaden the light adsorption of Bi24O31Br10 but also serve as excellent 'electronic receptor' for synergically enhancing the separation/transfer efficiency of photogenerated electrons/holes. Meanwhile, temperature programmed desorption (TPD) result revealed that MXene and Bi can promote N2 adsorption/activation and NH3 desorption over Bi24O31Br10@Bi/Ti3C2Tx. As a result, under mild conditions and without the presence of hole scavenger, the ammonia synthesis efficiency of Bi24O31Br10@Bi/Ti3C2Tx-20 % reached 53.86 µmol g-1cat for three hours which is 3.2 and 53.8 times of Bi24O31Br10 and Ti3C2Tx, respectively. This study offers a novel scheme for the construction of photocatalytic systems and demonstrates Ti3C2Tx MXene and metal Bi as a promising and cheap co-catalyst.

Vacancy-Mediated Control of Local Electronic Structure for High-Efficiency Electrocatalytic Conversion of N2 to NH3.

Ambient electrocatalytic nitrogen (N2 ) reduction has gained significant recognition as a potential substitute for producing ammonia (NH3 ). However, N2 adsorption and *NN protonation for N2 activation reaction with the competing hydrogen evolution reaction remain a daunting challenge. Herein, a defect-rich TiO2 nanosheet electrocatalyst with PdCu alloy nanoparticles (PdCu/TiO2-x ) is designed to elucidate the reactivity and selectivity trends of N2 cleavage path for N2 -to-NH3 catalytic conversion. The introduction of oxygen vacancy (OV) not only acts as active sites but also effectively promotes the electron transfer from Pd-Cu sites to high-concentration Ti3+ sites, and thus lends to the N2 activation via electron donation of PdCu. OVs-mediated control effectively lowers the reaction barrier of *N2 H and *H adsorption and facilitates the first hydrogenation process of N2 activation. Consequently, PdCu/TiO2-x catalyst attains a high rate of NH3 evolution, reaching 5.0 mmol gcat. -1  h-1 . This work paves a pathway of defect-engineering metal-supported electrocatalysts for high-efficient ammonia electrosynthesis.

Defect-Regulated Two-Dimensional Superlattice of Holey g-C3N4-TiO2 Nanohybrids: Contrasting Influence of Vacancy Content on Hybridization Impact and Photocatalyst Performance.

Defect engineering provides an effective way to explore efficient nanostructured catalysts. Herein, we synthesize defect-regulated two-dimensional superlattices comprising interstratified holey g-C3N4 and TiO2 monolayers with tailorable interfacial coupling. Using this interfacial-coupling-controlled hybrid system, a strong interdependence among vacancy content, performance, and interfacial coupling was elucidated, offering key insights for the design of high-performance catalysts. The defect-optimized g-C3N4-TiO2 superlattice exhibited higher photocatalytic activity toward visible-light-induced N2 fixation (∼1.06 mmol g-1 h-1) than defect-unoptimized and disorderly assembled g-C3N4-TiO2 homologues. The high photocatalytic performance of g-C3N4-TiO2 was attributed to the hybridization-induced defect creation, facilitated hydrogenation of adsorbed nitrogen, and improvement in N2 adsorption and charge transport. A comparison of the defect-dependent photocatalytic activity of g-C3N4, g-C3N4 nanosheets, and g-C3N4-TiO2 revealed the presence of optimal defect content for improving photocatalytic performance and the continuous increase of hybridization impact with the defect content. Sophisticated mutual influence among defect, electronic coupling, and photocatalytic ability underscores the importance of defect fine control in exploring high-performance hybrid photocatalysts. Along with the DFT calculation, the excellent photocatalyst performance of defect-optimized g-C3N4-TiO2 can be ascribed to the promotion of the uphill *N hydrogenation step as well as to enhancement of N2 adsorption, charge transfer kinetics, and mass transports.

Synergistic Spatial Confining Effect and O Vacancy in WO3 Hollow Sphere for Enhanced N2 Reduction.

Visible-light-driven N2 reduction into NH3 in pure H2O provides an energy-saving alternative to the Haber-Bosch process for ammonia synthesizing. However, the thermodynamic stability of N≡N and low water solubility of N2 remain the key bottlenecks. Here, we propose a solution by developing a WO3-x hollow sphere with oxygen vacancies. Experimental analysis reveals that the hollow sphere structure greatly promotes the enrichment of N2 molecules in the inner cavity and facilitates the chemisorption of N2 onto WO3-x-HS. The outer layer's thin shell facilitates the photogenerated charge transfer and the full exposure of O vacancies as active sites. O vacancies exposed on the surface accelerate the activation of N≡N triple bonds. As such, the optimized catalyst shows a NH3 generation rate of 140.08 µmol g-1 h-1, which is 7.94 times higher than the counterpart WO3-bulk.

The Construction of Surface-Frustrated Lewis Pair Sites to Improve the Nitrogen Reduction Catalytic Activity of In2O3.

The construction of a surface-frustrated Lewis pairs (SFLPs) structure is expected to break the single electronic state restriction of catalytic centers of P-region element materials, due to the existence of acid-base and basic active canters without mutual quenching in the SFLPs system. Herein, we have constructed eight possible SFLPS structures on the In2O3 (110) surface by doping non-metallic elements and investigated their performance as electrocatalytic nitrogen reduction catalysts using density functional theory (DFT) calculations. The results show that P atom doping (P@In2O3) can effectively construct the structure of SFLPs, and the doped P atom and In atom near the vacancy act as Lewis base and acid, respectively. The P@In2O3 catalyst can effectively activate N2 molecules through the enzymatic mechanism with a limiting potential of -0.28 eV and can effectively suppress the hydrogen evolution reaction (HER). Electronic structure analysis also confirmed that the SFLPs site can efficiently capture N2 molecules and activate N≡N bonds through a unique "donation-acceptance" mechanism.

Enhanced artificial nitrogen fixation efficiency induced by construction of ternary TiO2/MIL-88A(Fe)/g-C3N4 Z-scheme heterojunction.

Herein, a ternary TiO2/MIL-88A(Fe)/g-C3N4 heterojunction is successfully constructed through a facile hydrothermal strategy for enhancing solar energy harvesting and efficiency of catalytic nitrogen reduction induced by enlarged light absorption range, increasing interfacial charge transfer ability and desirable stability. Under the simulated sunlight irradiation, the N2 fixation experiment shows that the yield of NH3 reaches 1084.31 µmol/(g·h) over the TiO2/MIL-88A(Fe)/g-C3N4 photocatalyst, and the yield is significantly enhanced, which is 33.68 and 13.94 times that is higher than the pure TiO2 and g-C3N4, respectively. In a mean time, the excellent performance of the photocatalytic N2 fixation over the ternary TiO2/MIL-88A(Fe)/g-C3N4 is verified based on density function theory calculation and the decisive step over the composite is investigated by calculating Gibbs free energies of nitrogen reduction paths. The performance enhancement mechanism of TiO2/MIL-88A(Fe)/g-C3N4 is speculated, which indicates that the hybridized three-component system presents a desirable Z-scheme band alignment, resulting in the improvement of separation and transfer efficiency of photoinduced charge carriers. The article shows a new and high-efficiency TiO2/MIL-88A(Fe)/g-C3N4 photocatalysis for excellent nitrogen reduction ability.