A critical review on non-metal doped g-C3N4 based photocatalyst for organic pollutant remediation with sustainability assessment by life cycle analysis.

Photocatalysis is recognized to be one of the most promising ways to address energy and environmental issues by utilizing visible light. Graphitic carbon nitride (g-C3N4), with a moderate band gap (∼2.7 eV) has been the flashpoint in environmental photocatalysis as it can work better under visible light, can be synthesized by a facile synthesis process using low-cost materials, thermally and chemically stable. Still the photocatalytic performance of g-C3N4 is not satisfactory because of certain limitations such as insufficient visible light absorption capacity, low electron-hole separation efficiency, high recombination rate, poor surface area. Introduction of doping, band structure engineering, defecting and designing of heterojunction, composites etc. were investigated to amplify its applications. Among all these modifications, elemental doping is a suitable and successful alternative for the enhancement of the photocatalytic activity by changing the optical and electronic properties. This review emphasizes on advancement and trends of elemental doping and its application on photocatalytic organic pollutant remediation in aqueous medium. The fundamental photocatalytic activity of heterogeneous photocatalysis and specifically g-C3N4-based photocatalysis have been discussed. The benfits of non-metal doping, enhanced photocatalytic performance by doping element, mechanism invloved in doping, advantages of co-doping has been explained. Mono, bi, and tri non-metal doped g-C3N4 and their application for the removal of organic pollutants from water medium by visible light photocatalysis has been summerized. Life cycle assessment (LCA) of photocatalytic system has been highlighted. Future research should focus on the large-scale application of the photocatalysis process considering the economic aspects. A rigorous life cycle assessment for deploying the non-metal doped g-C3N4-based photocatalysis technology for successful commercial application is recommended.

Non-Metal Sulfur Doping of Indium Hydroxide Nanocube for Selectively Photocatalytic Reduction of CO2 to CH4: A "One Stone Three Birds" Strategy.

Photocatalytic CO2 reduction is considered as a promising strategy for CO2 utilization and producing renewable energy, however, it remains challenge in the improvement of photocatalytic performance for wide-band-gap photocatalyst with controllable product selectivity. Herein, the sulfur-doped In(OH)3 (In(OH)xSy-z) nanocubes are developed for selective photocatalytic reduction of CO2 to CH4 under simulated light irradiation. The CH4 yield of the optimal In(OH)xSy-1.0 can be enhanced up to 39 times and the CH4 selectivity can be regulated as high as 80.75% compared to that of pristine In(OH)3. The substitution of sulfur atoms for hydroxyl groups in In(OH)3 enhances the visible light absorption capability, and further improves the hydrophilicity behavior, which promotes the H2O dissociation into protons (H*) and accelerates the dynamic proton-feeding CO2 hydrogenation. In situ DRIFTs and DFT calculation confirm that the non-metal sulfur sites significantly weaken the over-potential of the H2O oxidation and prevent the formation of ·OH radicals, enabling the stabilization of *CHO intermediates and thus facilitating CH4 production. This work highlights the promotion effect of the non-metal doping engineering on wide-band-gap photocatalysts for tailoring the product selectivity in photocatalytic CO2 reduction.

Metal-free nitrogen and sulfur binary-doped cellulose-based biochar for efficient suppression of priority organic pollutants and environmental application.

Biochar production from cellulose biomass is an alternative solution in the search for clean and renewable biofuel. However, the rational design of cellulose biochar (CLBC) for polycyclic aromatic hydrocarbons (PAHs) reduction by integrating pyrolysis process parameters and introducing heteroatoms as inhibitors remains to be studied. Therefore, exogenous heteroatoms (N, B, S, SB, NB, and NS) were used to modify CLBC for the first time. CLBC300 pyrolyzed at 300 °C in a CO2 atmosphere achieved the highest concentrations of PAHs (4982 ± 271 ng g-1), compared with that of CLBC700 (3615 ± 71 ng g-1) formed in a N2 atmosphere without heteroatom doping. The results showed that binary nitrogen- and sulfur-doped CLBC exhibited remarkable PAH-removal performance of 99 % with the lowest toxic equivalency (TEQ) value of 9 ng g-1. Overall, this study presents novel insights into the development of a heteroatom-based modification approach for reducing CLBC-borne PAHs and creating value-added products from cellulose biomass.

A first-principles study: single-layer TiS2 modified by non-metal doping.

In this paper, the effect of substitutional doping of boron (B), carbon (C), nitrogen (N), oxygen (O), and phosphorus (P) at the S-site on the electronic structure of the monolayer TiS2 system is investigated using a first-principles calculation method. The effect of nonmetal doping on the band gap of TiS2 and its mechanism were studied by analyzing the stability, electronic structure, and charge transfer of the system. By calculating the electron cloud overlap population and formation energy, we confirmed that the system is stable, and the Ti-X bond length of the doped system undergoes different degrees of distortion. The properties of the B, C, and N doped system show different properties with different doping concentrations; the band gap of the O-atom system gradually expands with the rise of the doping rate. The hybridization positions of the impurity and the intrinsic atoms are found by comparing the DOS; combined with the charge density difference, we confirmed the interaction of impurity atoms with the system and revealed the bonding process of different systems.

Effect of sulfur doping of zinc-imidazole coordination polymer (ZnIm CP) as a novel photocatalyst for degradation of ionic dyes.

Zinc-Imidazole coordination polymer (ZnImCP) was simply synthesized hydrothermally at relatively low temperature (70 °C) from zinc acetate and imidazole. ZnImCP was treated by sulfide solution to produce sulfur-doped samples (S-ZnImCPs). Structures of the synthesized ZnImCP and S-ZnImCPs were characterized through FTIR, PXRD, and, Raman, SEM/EDX, N2-BET, UV-VIS DRS, and pHpzc analyses. The photocatalytic performances of pristine CP and sulfur modified CPs under visible and ultra-violet irradiations for degrading the cationic methylene blue (MB) and the anionic methyl orange (MO) were investigated considering different initial pH values 4, 7 and 10. Under visible light, the results indicate that these CPs display considerable photocatalytic degradation towards the cationic MB for the initial pH 4 and 7 where degradation increases with sulfur content. While under ultra-violet, results indicate considerable photocatalytic degradation towards both dyes for the initial pH 7 and 10 where degradation increases with sulfur content which indicates the gainful of non-metal dopping. The buffering nature of CPs and the type of radiation considering determined band-gap values effectively influence the degradation mechanisms.

N-Doped CrS2 Monolayer as a Highly-Efficient Catalyst for Oxygen Reduction Reaction: A Computational Study.

Searching for low-cost and highly-efficient oxygen reduction reaction (ORR) catalysts is crucial to the large-scale application of fuel cells. Herein, by means of density functional theory (DFT) computations, we proposed a new class of ORR catalysts by doping the CrS2 monolayer with non-metal atoms (X@CrS2, X = B, C, N, O, Si, P, Cl, As, Se, and Br). Our results revealed that most of the X@CrS2 candidates exhibit negative formation energy and large binding energy, thus ensuring their high stability and offering great promise for experimental synthesis. Moreover, based on the computed free energy profiles, we predicted that N@CrS2 exhibits the best ORR catalytic activity among all considered candidates due to its lowest overpotential (0.41 V), which is even lower than that of the state-of-the-art Pt catalyst (0.45 V). Remarkably, the excellent catalytic performance of N@CrS2 for ORR can be ascribed to its optimal binding strength with the oxygenated intermediates, according to the computed linear scaling relationships and volcano plot, which can be well verified by the analysis of the p-band center as well as the charge transfer between oxygenated species and catalysts. Therefore, by carefully modulating the incorporated non-metal dopants, the CrS2 monolayer can be utilized as a promising ORR catalyst, which may offer a new strategy to further develop eligible electrocatalysts in fuel cells.

Microwave hydrothermal fabrication of 3D hierarchical Br/Bi2WO6 with enhanced photocatalytic activity for Rhodamine B and tetracycline degradation.

Basing on the unique advantages of uniform and rapid volumetric heating of microwave irradiation, microwave hydrothermal method has been used to fabricate Br/Bi2WO6 for streamlining the preparation procedure and enhancing the photocatalytic activity. The results indicated that Br was successfully introduced into the lattice of Bi2WO6, which improved the absorption ability of visible light. Moreover, Br/Bi2WO6 exhibited smaller size and the enhanced separation efficiency of photogenerated carriers as compared with Bi2WO6. Br/Bi2WO6 exhibited superior reusability and photocatalytic activity of Rhodamine B (RhB) and tetracycline (TC). Furthermore, the enhanced photocatalytic activity of Br/Bi2WO6 was mainly ascribed to the increased specific surface area, wide UV-vis light absorption range, and high separation efficiency of photogenerated charge carriers originating from Br doping and microwave heating.

Effect of non-metal doping on the photocatalytic activity of titanium dioxide on the photodegradation of aqueous bisphenol A.

Non-metals B, N, P and I were doped into titanium dioxide (TiO2) to form photocatalyst particles. TiO2 doped with various ratios of B, N, P and I were thus formed and these photocatalyst particles were bonded to fix each other in a column system under sunlight as a result of the photocatalytic degradation of bisphenol A (BPA). The doped TiO2 was characterized by X-ray diffraction (XRD), UV-visible absorption spectroscopy, and X-ray photoelectron spectroscopy (XPS) to elucidate the mechanism of doping reaction. Doping with B, N, P and I to form the photocatalyst greatly red-shifted the absorption wavelength, increasing the effectiveness of the photocatalyst in reducing BPA. XPS analysis following doping revealed the bonding of B, N, P, I and other functional groups of the surface of the photocatalyst. Results of an experiment that involved the photocatalysts revealed that BPA degradations of 88%, 94%, 93% and 100% in 66.5 min under sunlight using B, N, P, and I-doped titanium dioxide, respectively. The doped photocatalysts were all superior to the undoped titanium dioxide.

Novel Route to Obtain Carbon Self-Doped TiO2 Mesoporous Nanoparticles as Efficient Photocatalysts for Environmental Remediation Processes under Visible Light.

Titanium dioxide materials were synthesized using two different methods. The samples were characterized by X-ray diffraction (XRD), UV-Visible diffusion reflectance spectroscopy (UV-Vis DR), Raman spectroscopy, N2 adsorption/desorption, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron spectroscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Although both kind of materials were found to have mesoporous structure and anatase crystalline phase, one of them was obtained from a synthesis method that does not involve the use of surfactants, and therefore, does not require calcination at high temperatures. This implies that the synthesized solid was self-doped with carbon species, coming only from the same source used for titanium. Then, the relationship between the presence of these species, the final calcination temperature, and the photocatalytic activity of the solids was studied in terms of the degradation and mineralization of an Acid Orange 7 aqueous solution, under visible radiation. A photosensitizing effect caused by the non-metal presence, that allows the solid to extend its absorption range, was found. Hence, a novel route to prepare C-modified photoactive mesoporous TiO2, simpler and cheaper, where neither a template nor an external carbon source is used, could be performed.