RESUMEN
In the background of air pollution and regular COVID-19 prevention, personal protective masks are necessary for our daily life. However, protective masks with high PM0.3 filtration usually have poor air permeability and are mostly disposable, leading to a heavy burden on the environment. In this work, a reusable membrane based on piezoelectric poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] nanofibers embedded with BaTiO3 nanoparticles (BTO NPs) was developed. The P(VDF-TrFE)/BTO composite nanofibers not only have enhanced piezoelectricity and surface polarity but also have reduced diameters that could be beneficial for electrostatic adhesion, pole-polar interactions, and mechanical sieving to increase the PM0.3 capture capacity. Moreover, the BTO NPs also improved the charge storage capacity of the composite membrane, which could further enhance the PM0.3 filtration efficiency after corona treatment. The piezoelectric mask based on P(VDF-TrFE)/BTO composite nanofibers has high filtration efficiencies of 96% for PM0.3 and 98% for bacteria, while the pressure drop was only 182 Pa, which is lower than the commercial N95 standard of 343.2 Pa. Furthermore, the piezoelectric mask has a long and stable filtration performance after 5 cycles of 75% alcohol disinfection, demonstrating that the P(VDF-TrFE)/BTO composite membrane has a potential application in personal protective masks with comfortable and reusable properties.
RESUMEN
Piezoelectric nanogenerators with large output, high sensitivity, and good flexibility have attracted extensive interest in wearable electronics and personal healthcare. In this paper, the authors propose a high-performance flexible piezoelectric nanogenerator based on piezoelectrically enhanced nanocomposite micropillar array of polyvinylidene fluoride-trifluoroethylene (P(VDF-TrFE))/barium titanate (BaTiO3 ) for energy harvesting and highly sensitive self-powered sensing. By a reliable and scalable nanoimprinting process, the piezoelectrically enhanced vertically aligned P(VDF-TrFE)/BaTiO3 nanocomposite micropillar arrays are fabricated. The piezoelectric device exhibits enhanced voltage of 13.2 V and a current density of 0.33 µA cm-2 , which an enhancement by a factor of 7.3 relatives to the pristine P(VDF-TrFE) bulk film. The mechanisms of high performance are mainly attributed to the enhanced piezoelectricity of the P(VDF-TrFE)/BaTiO3 nanocomposite materials and the improved mechanical flexibility of the micropillar array. Under mechanical impact, stable electricity is stably generated from the nanogenerator and used to drive various electronic devices to work continuously, implying its significance in the field of consumer electronic devices. Furthermore, it can be applied as self-powered flexible sensor work in a noncontact mode for detecting air pressure and wearable sensors for detecting some human vital signs including different modes of breath and heartbeat pulse, which shows its potential applications in flexible electronics and medical sciences.
