RESUMEN
Pharmaceutical manufacturing utilizes solvents at different stages of production. Some of the harmful solvent residuals may be retained in the final product; therefore, they need to be monitored for quality control and to meet the regulation requirement. Here, a novel method capable of rapidly analyzing residual solvents in pharmaceutical products was developed using a compact-portable gas chromatography with a photoionization detector (GC-PID). The method consists of modified Tedlar® bag sampling, online pre-concentration, separation of volatiles by miniaturized GC, and micro-PID detection. The method detection limits of selected residual solvents were in the range of 26.00 - 52.03â¯pg/mL which is much lower than the pharmaceutical compliance concentration limits. Limits of detection > 520â¯pg of analyte per grams of sample was also determined for the over-the-counter drugs. The method performance showed rapid speed (5â¯min), linear calibration (r2 < 0.99), and repeatable retention time (RSD < 0.4â¯%). Direct analysis of residual solvents in solid samples was conducted without the need for complex sample preparation. The method validation using over-the-counter pharmaceutical products yielded excellent accuracy (recovery > 91.2â¯%) and precision (RSD < 6.5â¯%) for the selected residual solvents, including 1,4-dioxane, benzene, chlorobenzene, cyclohexane, xylenes, and toluene. This portable and rapid method could be deployed during the pharmaceutical drug manufacturing processes for quality control.
Asunto(s)
Límite de Detección , Solventes , Solventes/química , Solventes/análisis , Cromatografía de Gases/métodos , Cromatografía de Gases/instrumentación , Contaminación de Medicamentos/prevención & control , Preparaciones Farmacéuticas/análisis , Control de Calidad , Reproducibilidad de los Resultados , CalibraciónRESUMEN
BACKGROUND: Concentrations of metoprolol in exhaled breath condensate (EBC) have not been investigated. Herein, we aim to determine the metoprolol levels in EBC, plasma, and urine samples. METHODS: Biological samples were collected from 39 patients receiving metoprolol. Metoprolol was determined using liquid chromatography mass spectrometery. The obtained metoprolol levels in biological fluids were investigated for possible inter-correlations. RESULTS: Acceptable linearity was obtained with coefficient of determinations equal to 0.9998, 0.9941, and 0.9963 for EBC, plasma, and urine samples, respectively. The calibration curves were linear in the ranges of 0.6-500, 0.4-500, and 0.7-10,000 µg·L- 1 regarding EBC, plasma, and urine samples, respectively. The detection and quantification limits were (0.18, 0.12, and 0.21 µg·L- 1) and (0.60, 0.40, and 0.70 µg·L- 1) for EBC, plasma, and urine samples, respectively. The relative standard deviations for the intra- and inter-day replications were obtained between 5.2 and 6.1 and 3.3-4.6%, respectively. The obtained mean metoprolol levels in EBC, plasma, and urine samples of 39 patients were 5.35, 70.76, and 1943.1 µg·L- 1. There were correlations between daily dose and plasma and urinary concentrations of metoprolol in the investigated samples, whereas no significant correlation was observed for daily dose and EBC levels. The correlation among plasma-urine levels was significant, however, the non-significant correlation was obtained between plasma and EBC concentrations. CONCLUSION: Metoprolol levels varied widely due to the metabolic pattern of the Azeri population, different dosages received by the patients, formulation effects, age, sex, and interactions with the co-administered drugs. A poor correlation of EBC-plasma concentrations and a significant correlation of plasma-urine concentrations were observed. Further investigations are required to provide the updated services to personalized medicine departments.
Asunto(s)
Metoprolol , Metoprolol/orina , Metoprolol/farmacocinética , Metoprolol/sangre , Humanos , Femenino , Masculino , Estudios Transversales , Persona de Mediana Edad , Adulto , Anciano , Pruebas Respiratorias/métodos , Cromatografía Liquida/métodos , Antagonistas de Receptores Adrenérgicos beta 1/orina , Antagonistas de Receptores Adrenérgicos beta 1/sangre , Antagonistas de Receptores Adrenérgicos beta 1/farmacocinética , Antagonistas de Receptores Adrenérgicos beta 1/análisis , Adulto JovenRESUMEN
Severe acute respiratory syndrome coronaviruses 2 (SARS-CoV-2) causing coronavirus disease 2019 (COVID-19) affected the health of human beings and the global economy. The patients with SARS-CoV-2 infection had viral RNA or live infectious viruses in feces. Thus, the possible transmission of SARS-CoV-2 through wastewater received great attentions. Moreover, SARS-CoV-2 in wastewater can serve as an early indicator of the infection within communities. We summarized the preconcentration and detection technology of SARS-CoV-2 in wastewater aiming at the complex matrices of wastewater and low virus concentration and compared their performance characteristics. We described the emerging tests that would be possible to realize the rapid detection of SARS-CoV-2 in fields and encourage academics to advance their technologies beyond conception. We concluded with a brief discussion on the outlook for integrating preconcentration and the detection of SARS-CoV-2 with emerging technologies.
Asunto(s)
Técnicas Biosensibles , COVID-19 , SARS-CoV-2 , Aguas Residuales , Aguas Residuales/virología , SARS-CoV-2/aislamiento & purificación , SARS-CoV-2/genética , COVID-19/virología , COVID-19/diagnóstico , COVID-19/transmisión , Humanos , Técnicas Biosensibles/métodos , Técnicas Biosensibles/instrumentación , ARN Viral/análisis , ARN Viral/aislamiento & purificaciónRESUMEN
In our previous study, the combination of two on-line sample preconcentration techniques, large-volume sample stacking with an electroosmotic flow (EOF) pump (LVSEP) and transient isotachophoresis (tITP), in microchip electrophoresis (MCE) was developed, which was named large-volume dual preconcentration by isotachophoresis and stacking (LDIS). LDIS was apparently effective for improving the sensitivity and the peak shape. In LDIS, however, there was a limit to the improvement of the sensitivity enhancement factor (SEF) since the amount of analytes to be concentrated was limited to the channel volume. To overcome this issue, in the present article, LDIS was coupled with field-amplified sample injection (FASI) technique on Y-shaped channel microchips. The use of a Y-channel in LDIS-FASI allowed consecutive LVSEP, FASI and tITP enrichments with a simple voltage control. In conventional LVSEP and LDIS analyses of a standard analyte, the SEFs were evaluated to be 2630 and 13,100, respectively, whereas in LDIS-FASI that was increased to 27,900 even at the FASI injection time of 0 s. To achieve higher SEFs, furthermore, the FASI injection time was increased to 150 s, resulting in the best SEF of 58,500. It should be emphasized that the peak width in LDIS-FASI was quite narrow, only 0.3-3.1 s, while in normal LVSEP that was 13 s. Furthermore, the LDIS-FASI technique was applied to the analysis of oligosaccharide mixture. Due to the focusing effect by LDIS-FASI, the resolutions were improved from 0.97-1.57 to 2.08-2.73.
RESUMEN
A new, simple and rapid spectrophotometric method was developed for determination of Sudan Black B in food products by supramolecular solvent-based-vortex-assisted-dispersive liquid liquid microextraction (SUPRAS-VA-DLLME). Extraction solvent type, volume of solvent, pH, volume of THF, centrifugation time, vortex time, and sample volume were investigated as optimization parameters of the developed method. Under the optimum conditions, limit of detection and limit of quantification, preconcentration factor and enhancement factor of the developed method were calculated to be 9.01 µg L-1, 29.73 µg L-1, 20, and 55, respectively. The developed microextraction method was successfully applied to food samples for the determination of Sudan Black B.
RESUMEN
Microplastics is known to be ubiquitous in aquatic environment. Quantification of microplastics in natural waters is an important problem of analytical chemistry, the solution of which is needed for the assessment of water quality and potential risks for water inhabitants and consumers. Separation methods play a key role in the correct quantification of microplastics in natural waters. In the present study the applicability of countercurrent chromatography to the continuous-flow separation and preconcentration of microplastics from water samples in rotating coiled column (RCC) using water-oil systems has been demonstrated for the first time. The effect of column rotation speed and mobile phase (water) flow rate on the retention of the stationary (oil) phase in RCC is studied. The retention parameters of 10 vegetable and 2 synthetic oils are determined. Castor, olive, rapeseed, soybean, linseed, sesame, and sunflower oils are found to be applicable to the separation of microplastics from water samples using RCC. Taking as example polyethylene microparticles of different size (40-63, 63-100, and 100-250 µm), the high recovery of microplastics (about 100 %) from aqueous phase into castor and rapeseed oils is shown. The method has been proven to be efficient for the separation of microplastics from simulated fresh and sea natural waters. It may be perspective not only for the quantification of microplastics in natural waters but as well as for the purification of wastewaters containing microplastics.
RESUMEN
A novel cloud-point extraction (CPE) procedure for the determination of ultra-trace amounts of arsenic species in real samples, purchased from the local market by spectrophotometer was developed. Inorganic arsenic species analysis in water, beverages, and foods has become increasingly important in recent years, as arsenic species are considered carcinogenic and are assessed at significant levels in samples. The technique is established on a selective ternary complex of As(V) with astrazon orange G (AOG+) in the presence of tartaric acid and polyethylene glycol tertoctylphenyl ether (Triton X-114) at pH 4.0. The calibration curve developed within range 3.0-160 ng/mL with a correlation coefficient of 0.9988 for As(V) provided a preconcentration factor of 200 and a limit of detection (3S blank/m) of 0.88 ng/mL under optimum investigation conditions. The results of molar absorptivity and Sandell sensitivity are calculated and found to be 4.38 × 105 L/mol cm and 0.018 ng cm-2, respectively. The statistical treatment of data obtained from the proposed and GF-AAS procedures are compared in terms of Student's t-tests and variance ratio F-tests has revealed no significant differences. The methodology has been effectively confirmed by assessing real samples and comparing it to the GF-AAS method statistically.
Asunto(s)
Arsénico , Compuestos Azo , Límite de Detección , Espectrofotometría , Arsénico/análisis , Espectrofotometría/métodos , Compuestos Azo/química , Compuestos Azo/análisis , Fenoles/análisis , Fenoles/química , Concentración de Iones de Hidrógeno , Reproducibilidad de los ResultadosRESUMEN
This work explores strategies for electrokinetic preconcentration of extracellular vesicles (EVs) that are potential source of biomarkers for different diseases. The first approach that led to successful preconcentration of EVs is based on large volume sample stacking (LVSS), allowing an enrichment factor of 7 for CE of EVs with long-end injection (using a capillary with an effective length of 50 cm). Attempts were also made to perform multiple cycles of LVSS, field amplified sample stacking (FASS) and field amplified sample injection (FASI), to improve EVs preconcentration performance. The focus was then put on development of capillary isotachophoresis under high ionic strengths (IS) for electrokinetic enrichment of slow migrating EVs having heterogeneous mobilities. This approach relies on the use of extremely high concentrations of the terminating electrolyte (TE) to slow down the mobility of TE co-ions, rendering them slower than those of EVs. The limit of detection for intact EVs using the developed ITP-UV method reached 8.3 × 108 EVs/mL, allowing an enrichment of 25 folds and a linear calibration up to 4 × 1010 EVs/mL. The ITP-UV and ITP-LIF approaches were applied to provide the electrokinetic signature of EVs of bovine milk and human plasma as well as to visualize more specifically intravesicular fluorescently labelled EVs. The investigation of these strategies shredded light into the challenges still encountered with electrokinetic preconcentration and separation of heterogeneous EVs sub-populations which are discussed herein based on our results and other attempts reported in the literature.
Asunto(s)
Electroforesis Capilar , Vesículas Extracelulares , Isotacoforesis , Leche , Vesículas Extracelulares/química , Electroforesis Capilar/métodos , Animales , Humanos , Bovinos , Leche/química , Isotacoforesis/métodos , Límite de Detección , Ratones , Concentración OsmolarRESUMEN
In the era of liquid biopsy, microRNAs emerge as promising candidates for the early diagnosis and prognosis of cancer, offering valuable insights into the disease's development. Among all the existing analytical approaches, even if traditional approaches such as the nucleic acid amplification ones have the advantages to be highly sensitive, they cannot be used at the point-of-care, while sensors might be poorly sensitive despite their portability. In order to improve the analytical performance of existing electroanalytical systems, we demonstrate how a simple chromatographic paper-based disk might be useful to rationally improve the sensitivity, depending on the number of preconcentration cycles. A paper-based electrochemical platform for miRNA detection has been developed by modifying a paper-based electrode with a methylene blue (MB)-modified single-stranded sequence (ssDNA) complementary to the chosen miRNA, namely miR-224 that is associated with lung cancer. A detection limit of ca. 0.6 nM has been obtained in spiked human serum samples. To further enhance the sensitivity, an external chromatographic wax-patterned paper-based disk has been adopted to preconcentrate the sample, and this has been demonstrated both in standard and in serum solutions. For each solution, three miR-224 levels have been preconcentrated, obtaining a satisfactory lowering detection limit of ca. 50 pM using a simple and sustainable procedure. This approach opens wide possibilities in the field of analytical and bioanalytical chemistry, being useful not only for electrochemistry but also for other architectures of detection and transduction.
Asunto(s)
Técnicas Electroquímicas , Límite de Detección , MicroARNs , Papel , Humanos , MicroARNs/análisis , MicroARNs/sangre , Técnicas Electroquímicas/métodos , Técnicas Biosensibles/métodos , Azul de Metileno/química , Electrodos , Neoplasias Pulmonares/diagnóstico , Neoplasias Pulmonares/genética , Neoplasias Pulmonares/sangreRESUMEN
Anthropogenic gadolinium from MRI contrast agents has been detected in surface waters worldwide. It is released with the treated effluents of wastewater treatment plants, similar to other wastewater-derived substances (WWDS) such as pharmaceuticals and personal care products. We determined concentrations of the rare earth elements in tap water from Berlin, Germany, using an automated preconcentration procedure that is both time- and cost-efficient. Anthropogenic gadolinium concentrations in Berlin's tap water increased on average 30-fold between 2009 and 2021. However, the tap water composition responded quickly to the reduced number of MRI scans during the COVID-19 pandemic, and some districts show a decrease from 2016 to 2021. Since climate change causes groundwater levels to decline in many regions, this needs to be mitigated by artificial groundwater recharge with surface water. This will inevitably lead to an increase in WWDS in potable water, which can be cost-efficiently monitored using anthropogenic gadolinium as tracer.
Asunto(s)
COVID-19 , Cambio Climático , Medios de Contraste , Agua Potable , Gadolinio , Aguas Residuales , Contaminantes Químicos del Agua , Gadolinio/análisis , Aguas Residuales/química , Berlin , Contaminantes Químicos del Agua/análisis , Humanos , Alemania , SARS-CoV-2 , Monitoreo del Ambiente/métodosRESUMEN
In this study, large-volume dual preconcentration by isotachophoresis and stacking (LDIS) which is an on-line sample preconcentration technique coupling large-volume sample stacking with an electroosmotic flow pump (LVSEP) with transient isotachophoresis (tITP) was applied to microchip electrophoresis (MCE) for improving both detection sensitivities and peak shapes. To realize LDIS in MCE, we investigated experimental procedures for injecting a short plug of a leading electrolyte (LE) solution into a straight microchannel without any sophisticated injector apparatus. We found that a short LE plug could be injected into a sample-filled straight-channel only by making the liquid level of the LE solution in an outlet reservoir higher than that in an inlet one. By applying a reversed-polarity voltage to the microchip, anionic analytes injected throughout the microchannel were first enriched by LVSEP, followed by tITP. Through the second preconcentration effect by tITP in LDIS, sensitivity enhancement factor (SEF) and asymmetry factor for a standard dye were improved from 878 and 0.62 to 1330 and 1.14, respectively, relative to those in conventional LVSEP. It should be noted that more viscous running buffer containing sieving polymers could be employed to the LDIS analysis, which was effective for improving the SEF and the separation efficiencies, especially for bio-polymeric compounds. Finally, LDIS was applied to the oligosaccharide and protein analyses in MCE, resulting in the SEFs of 1410 and ca. 50 for maltotriose and bovine milk casein, respectively.
RESUMEN
In this research, a new approach based on magnetic electrodes has been developed for the determination of per-fluorooctane sulfonic acid (PSOF). Zinc and Titanium-based Metal-organic framework (MOF) was synthesized and used with polypyrrole as a conductive polymer for preparation of the absorbent to achieve the best performance for electrochemical application. The response of the electrode for determination of the PFOS was affected and optimized by different factors such as buffer solution, pH of the solution, amount of absorbent, extraction time of absorbent, accumulation time, as well as the Square Wave Voltammetry (SWV) instrumental parameters including voltage step, pulse amplitude, frequency and resting time. In the optimum condition, the response of the Zn/Ti/C-MOF-magnetic molecular imprinting polymer/carbon paste electrode (MOFMMIP/CPE) has increased logarithmically by increasing the concentration in the range of 0.002-165 µM by the limit of detection (LOD) of 0.7 nM. The obtained percentage of Recovery (96.00-104.14 %), Bias (-4.00 - 4.14 %) and Relative Standard Deviation (RSD) (1.89-3.74 %) for determination of the PFOS in real and spiked tap water, river water and well water samples demonstrates that the proposed method has an acceptable precision. The comparison between the gained data by the presented method and High-performance liquid chromatography (HPLC) showed that the presented method has high accuracy.
RESUMEN
A new magnetic nano gel (MNG) was prepared from choline chloride/phenol deep eutectic solvent and magnetic amberlite XAD-7 nanocomposite. The dispersive solid phase micro extraction (dSPME) method was developed for seperation and preconcentration of Brilliant Blue FCF (BB) by the prepared MNG. In this study, firstly, the optimum DES type and mole ratio of DES were investigated before response surface methodology optimization. Then, the effect of the MNG-dSPME experimental parameters were optimized by response surface methodology using central composite design. Under the optimum microextraction conditions, limit of detection (LOD), limit of quantification (LOQ), preconcentration factor (PF), enhencament factor (EF) were found to be 1.15 µg L-1,3.80 µg L-1, 70, and 88, respectively. It was seen that the recovery of real samples were obtained from 95.5 to 103.6%. The pesent method was succesfully for extraction of BB in some food, personal care samples, to the best of our knowledge, this is the first study that is presented method on determination of BB by preconcentration with magnetic nano gel. The obtained results showed that the present procedure is effective, sensitive, and has high accuracy for the quantitative detection of BB.
Asunto(s)
Disolventes Eutécticos Profundos , Contaminación de Alimentos , Límite de Detección , Microextracción en Fase Sólida , Contaminación de Alimentos/análisis , Microextracción en Fase Sólida/métodos , Microextracción en Fase Sólida/instrumentación , Disolventes Eutécticos Profundos/química , Espectrofotometría , Bencenosulfonatos/químicaRESUMEN
A fast and accurate identification of Listeria monocytogenes. A new quartz crystal microbalance (QCM) aptasensor was designed for the specific and rapid detection of L. monocytogenes. Before detection of the target bacterium from samples in the QCM aptasensor, a magnetic pre-enrichment system was used to eliminate any contaminant in the samples. The prepared magnetic system was characterized using ATR-FTIR, SEM, VSM, BET, and analytical methods. The saturation magnetization values of the Fe3O4, Fe3O4@PDA, and Fe3O4@PDA@DAPEG particles were 57.2, 40.8, and 36.4 emu/g, respectively. The same aptamer was also immobilized on the QCM crystal integrated into QCM flow cell and utilized to quantitatively detect L. monocytogenes cells from the samples. It was found that a specific aptamer-magnetic pre-concentration system efficiently captured L. monocytogenes cells in a short time (approximately 10 min). The Fe3O4@PDA@DA-PEG-Apt particles provided selective isolation of L. monocytogenes from the bacteria-spiked media up to 91.8%. The immobilized aptamer content of the magnetic particles was 5834 µg/g using 500 ng Apt/mL. The QCM aptasensor showed a very high range of analytical performance to the target bacterium from 1.0 × 102 and 1.0 × 107 CFU/mL. The limit of detection (LOD) and limit of quantitation (LOQ) were 148 and 448 CFU/mL, respectively, from the feeding of the QCM aptasensor flow cell with the eluent of the magnetic pre-concentration system. The reproducibility of the aptasensor was more than 95%. The aptasensor was very specific to L. monocytogenes compared to the other Listeria species (i.e., L. ivanovii, L. innocua, and L. seeligeri) or other tested bacteria such as Staphylococcus aureus, Escherichia coli, and Bacillus subtilis. The QCM aptasensor was regenerated with NaOH solution, and the system was reused many times.
Asunto(s)
Aptámeros de Nucleótidos , Listeria monocytogenes , Tecnicas de Microbalanza del Cristal de Cuarzo , Reproducibilidad de los Resultados , Aptámeros de Nucleótidos/química , Escherichia coli , Fenómenos MagnéticosRESUMEN
Accurate quantification of nano-selenium (nSe) and other ionic Se species in aquatic environments is a prerequisite for reliable estimation of their potential hazards. In this study, a micropore membrane filtration-based method followed by ICP-MS analysis was proposed for the selective concentration and determination of nSe in the water column. Polyvinylidene fluoride (PVDF) and nylon micropore filtration membranes were proven to efficiently capture nSe under optimal conditions (retention > 91.0 ± 0.87%). At the same time, ionic selenite and selenate could escape from the membranes, realizing the isolation of nSe and ionic Se species. The interference of dissolved organic matter (DOM) during separation can be resolved by adding Ca(II) ions, which can induce the formation of DOM aggregates by cation bridging effects. nSe retained on PVDF membranes could be effectively eluted with FL-70 (a powerful alkaline surfactant) aqueous solutions (0.5%, m/v) while maintaining the original size and morphology. Although nSe trapped on nylon membranes could not be easily eluted, quantification can also be achieved after membrane digestion. Speciation of ionic selenite and selenate in the filtrate was further conducted with an anion exchange column by using HPLC coupled with ICP-MS. The developed method was used to analyze Se species in six real water samples. Spiking experiments showed that the recoveries of nSe ranged from 70.2 ± 2.7% to 85.8 ± 1.3% at a spike level of 0.2 µg/L, and the recoveries of Se(IV) and Se(VI) ranged from 83.6 ± 0.5% to 101 ± 1% at a spike level of 0.55 µg/L, verifying the feasibility for the analysis of environmental water samples. This work provides possibilities to investigate the transformation and potential risks of nSe in the environment.
RESUMEN
The two-step preconcentration technique consisting of large-volume sample stacking (LVSS) and micelle to solvent stacking (MSS) in cyclodextrin-modified electrokinetic chromatography (CDEKC) was developed for the analysis of five cationic alkaloids in complex Chinese herbal prescriptions. Relevant parameters affecting separation and stacking performance were optimized separately. Under the optimal LVSS-MSS-CDEKC conditions, less analysis time and organic solvent were required, and the enhancement factors of analytes ranged from 12 to 15 compared with the normal CDEKC separation mode. Further, all validation results demonstrated good applicability and multiple alkaloids (epiberberine, dehydrocorydaline, jatrorrhizine, coptisine and berberine) in Yangxinshi tablet (YXST) have been simultaneously determined. This approach presents powerful potential for the determination of multiple components in complex preparations of Chinese medicine.
Asunto(s)
Alcaloides , Cromatografía Capilar Electrocinética Micelar , Medicamentos Herbarios Chinos , Comprimidos , Medicamentos Herbarios Chinos/química , Medicamentos Herbarios Chinos/análisis , Cromatografía Capilar Electrocinética Micelar/métodos , Comprimidos/química , Alcaloides/análisis , Alcaloides/química , Reproducibilidad de los Resultados , Micelas , Modelos Lineales , Ciclodextrinas/química , Límite de DetecciónRESUMEN
The chromium speciation procedure was optimized using magnetic polyaniline nanoparticles (Fe3O4@PANI NPs) solid-phase extraction coupled with microsampling injection-flame atomic absorption spectrometry (MIS-FAAS). Chromium speciation was successfully achieved by Fe3O4@PANI NPs at pH 8.0. The recoveries obtained for Cr(III) and Cr(VI) were above 95% and under 5%, respectively. Recoveries of over 95% for Cr(III) from 40.0 mL of the sample were obtained using 25 mg Fe3O4@PANI NPs and 500 µL of 0.2% (w/v) thiourea (TU) solution prepared in 2 mol L-1 HCl as eluent. Total chromium as Cr(III) was extracted quantitatively after reducing the Cr(VI) to Cr(III). The linear range, detection limit, preconcentration factor, and precision of the optimized method for Cr(III) in aqueous solution were 2.5-94.0 µg L-1, 0.335 µg L-1, 80, and 3.07%, respectively. The validation of the method was controlled using SPS-WW2 Batch 114 wastewater and BCR-715 industrial wastewater as standard reference materials (SRMs) for environmental water, and the obtained results were in close agreement with the certified values.
RESUMEN
A rapid and efficient method for the simultaneous monitoring and recovery of Auramine O (AO) and Methylene Blue (MB) dyes from water samples is presented. This method, named ultrasound-assisted dispersive-magnetic nanocomposites-solid-phase microextraction (UA-DMN-µSPE), utilizes NiCoMn/Fe3O4@C composite sorbents. Response surface methodology (RSM) combined with artificial neural networks (ANN) and generalized regression artificial neural network (GRNN) under central composite design (CCD) was employed to optimize various parameters for efficient extraction, followed by further refinement using desirability function analysis (DFA) and genetic algorithms (GA). Under optimized conditions, the method achieved exceptional recovery rates (99.5 ± 1.2% for AO and 99.8 ± 1.1% for MB) with acetone as the eluent. Additionally, a high preconcentration factor of 45.50 and 47.30 for AO and MB, respectively, was obtained. Low detection limits of 0.45 ng mLâ»1 (AO) and 1.80 ng mLâ»1 (MB) were achieved with wide linear response ranges (5-1000 and 5-2000 ng mLâ»1 for AO and MB, respectively). The method exhibited good stability with RSDs below 3% for five recycling runs, and minimal interference from various ions was observed. This UA-DMN-µSPE-UV/Vis method offers significant advantages in terms of efficiency, preconcentration, and detection limits, making it a valuable tool for the analysis of AO and MB in water samples.
Asunto(s)
Benzofenoneido , Nanocompuestos , Azul de Metileno , Agua , Fenómenos Magnéticos , Límite de Detección , Extracción en Fase SólidaRESUMEN
This study presents a dispersive micro-solid phase extraction (D-µ-SPE) approach for extracting and determining of two organophosphorus pesticides (OPPs), including diazinon and chlorpyrifos as model analytes in various samples. For this purpose, we synthesized, characterized, and utilized magnetic multi-walled carbon nanotubes coated with poly 8-hydroxyquinoline (MWCNTs/Fe3O4@PHQ) as a novel sorbent. The impact of various parameters, including sorbent type, sample pH, sample volume, sorbent amount, desorption solvent (type and volume), extraction time, and ionic strength on the extraction efficiency was investigated and optimized. Following the extraction, the desorbed pesticides in acetone were analyzed using gas chromatography with an FID detector. Under the optimized experimental conditions, the proposed method showed excellent linearity in the range of 3-1000 µg/L, low detection limit (0.9-1.5 µg/L), good relative recoveries (86-101.5 %), and high precision (RSD < 6.5 %). Finally, the applicability of this method was evaluated by analyzing the target OPPs in a variety of real samples, and obtained satisfactory results.
Asunto(s)
Nanocompuestos , Nanotubos de Carbono , Plaguicidas , Plaguicidas/análisis , Agua/química , Compuestos Organofosforados/análisis , Verduras , Oxiquinolina , Frutas/química , Extracción en Fase Sólida/métodos , Fenómenos Magnéticos , Nanocompuestos/química , Límite de DetecciónRESUMEN
In this study, a novel ionic liquid (3-(3-chloro-2-hydroxypropyl)-1-butyl-1H-imidazol-3-ium hexafluorophosphate, (IL-2) was synthesized and characterized by FT-IR, NMR (1H,13C,31P) spectroscopy, and TGA. Two microextraction methods, ultrasonic assisted ionic liquid dispersive liquid liquid microextraction (USA-IL-DLLME) and ultrasonic assisted-temperature controlled ionic liquid DLLME, have been developed for preconcentration of Brilliant Blue FCF (E133) from some food products by the sythesized IL-2. For optimization of the both methods, several parameters such as volume of IL-2, pH, temperature, ultrasonication time, extraction time, centrifugation time, and salt effect were investigated. The obtained results for both methods under optimum conditions were compared. According to these results, the best limit of detection (4.55 µg L -1), enrichment factor (58), preconcentration factor (50), linear range (15-80 µg L -1), relative standard deviation % (1.15 %) were obtained by use of USA-TC-IL-DLLME method. Furthermore, the developed USA-TC-IL-DLLME method was succesfully applied to real samples for the preconcentration of Brilliant Blue FCF.