High-efficiency photocatalytic H2-evolution in water/seawater over a novel noble metal free Ni3C/Mn0.5Cd0.5S Schottky junction.

Solar-powered seawater production of clean hydrogen fuel is highly prospective. In this work, Ni3C/Mn0.5Cd0.5S (NCMCS) Schottky junctions with excellent visible-light correspondence and photogenerated carrier separation properties are constructed using electrostatic attraction. The material achieves a hydrogen evolution rate of 6472.9 µmol h-1 g-1 in simulated seawater, which is 11 times higher than that of a single Mn0.5Cd0.5S (MCS). More attractively, the composite exhibits excellent hydrogen evolution rates in natural river water, groundwater and tap water, with significantly enhanced practical applicability. The underlying hydrogen evolution mechanism was extrapolated from a combination of experimental and theoretical calculations. The present work provides a low-cost and efficient hydrogen evolution photocatalyst for practical application, which can help promote the efficient conversion of solar-hydrogen energy.

The synergistic effect of Cl doping and Bi coupling to promote the carrier separation of BiOBr for efficient photocatalytic nitrogen reduction.

Photocatalytic nitrogen reduction reaction (NRR) is a sustainable process for ammonia synthesis under mild conditions. However, photocatalytic NRR activity and are generally limited by inefficient carrier separation and transfer. Therefore, parallel engineering of bulk phase doping and surface coupling is critical to achieving the goal of efficient NRR. In this study, Cl doped BiOBr nanosheet assemblies (BiOBr/Cl) were constructed in delicately designed deep eutectic solvents (DESs), combined with ionothermal methods at low temperatures and Bi3+ exsolution reduction strategy at high temperatures. The unique liquid state and reducibility of DESs induce the reduction of Bi3+ and the in situ coupling of Bi quantum dots at the surface of BiOBr/Cl nanosheets along with the construction of Bi-BiOBr/Cl nanosheet assemblies. The experimental results show that Cl doping could reduce the exciton dissociation energy and promote its dissociation to free carriers. Bi quantum dots could form tightly coupled Schottky junction with BiOBr/Cl enabling the efficient and unidirectional transmission of photogenerated electrons from BiOBr/Cl to metal Bi. The formed electron deficient region at Schottky interface promotes the adsorption and activation of N2. The hierarchical structure of Bi-BiOBr/Cl nanosheet assembly benefits to providing more N2 adsorption active sites. The DFT calculation shows that the accumulation of high concentration of active hydrogen in Bi-BiOBr/Cl leads to a significant decrease of energy barrier of the first step hydrogenation of N2. Bi-BiOBr/Clis more inclined to adsorb nitrogen for NRR in comparison with H* for hydrogen production. The synergistic effect of Cl doping and Bi coupling result in a high NRR activity of Bi-BiOBr/Cl photocatalyst of 6.67 mmol·g-1·h-1, which was 11.3 times higher than that of initial BiOBr. This study provides a promising strategy for designing highly active NRR photocatalysts with high efficiency carrier dissociation and transport.

Schottky Junction-Driven Photocatalytic Effect in Boron-Doped Diamond-Graphene Core-Shell Nanoarchitectures: An sp3/sp2 Framework for Environmental Remediation.

Self-formation of boron-doped diamond (BDD)-multilayer graphene (MLG) core-shell nanowalls (BDGNWs) via microwave plasma-enhanced chemical vapor deposition is systematically investigated. Here, the incorporation of nitrogen brings out the origin of MLG shells encapsulating the diamond core, resulting in unique sp3/sp2 hybridized frameworks. The evolution mechanism of the nanowall-like morphology with the BDD-MLG core-shell composition is elucidated through a variety of spectroscopic studies. The photocatalytic performance of these core-shell nanowalls is examined by the deterioration of methylene blue (MB) and rhodamine B (RhB) dyes beneath low-power ultraviolet (UV) light irradiation. Starting with 5 ppm dye solutions and employing BDGNWs as the photocatalyst, remarkable degradation efficiencies of 95% for MB within 100 min and 91% for RhB within 220 min are achieved. The effect of varying dye concentrations was also examined. The enhanced photocatalytic activity is driven by carrier photogeneration and mediated by the Schottky junction formed between BDD and MLG, promoting efficient photoinduced charge separation. The stability of the BDGNW photocatalyst is examined, and after five test runs, the photocatalytic behavior for MB and RhB degradation decreases to 87 and 85%, respectively, from initial values of 96 and 91%, demonstrating excellent photostability. These findings underscore the significance of diamond-graphene nanoarchitectures as promising green carbonaceous photocatalysts.

Schottky barrier memory based on heterojunction bandgap engineering for high-density and low-power retention.

Dynamic random-access memory (DRAM) has been scaled down to meet high-density, high-speed, and low-power memory requirements. However, conventional DRAM has limitations in achieving memory reliability, especially sufficient capacitance to distinguish memory states. While there have been attempts to enhance capacitor technology, these solutions increase manufacturing cost and complexity. Additionally, Silicon-based capacitorless memories have been reported, but they still suffer from serious difficulties regarding reliability and power consumption. Here, we propose a novel Schottky barrier memory (SBRAM), which is free of the complex capacitor structure and features a heterojunction based on bandgap engineering. SBRAM can be configured as vertical cross-point arrays, which enables high-density integration with a 4F2 footprint. In particular, the Schottky junction significantly reduces the reverse leakage current, preventing sneak current paths that cause leakage currents and readout errors during array operation. Moreover, the heterojunction physically divides the storage region into two regions, resulting in three distinct resistive states and inducing a gradual current slope to ensure sufficient holding margin. These states are determined by the holding voltage (Vhold) applied to the programmed device. When the Vhold is 1.1 V, the programmed state can be maintained with an exceptionally low current of 35.7 fA without a refresh operation.

Hot Electrons Induced by Localized Surface Plasmon Resonance in Ag/g-C3N4 Schottky Junction for Photothermal Catalytic CO2 Reduction.

Converting carbon dioxide (CO2) into high-value-added chemicals using solar energy is a promising approach to reducing carbon dioxide emissions; however, single photocatalysts suffer from quick the recombination of photogenerated electron-hole pairs and poor photoredox ability. Herein, silver (Ag) nanoparticles featuring with localized surface plasmon resonance (LSPR) are combined with g-C3N4 to form a Schottky junction for photothermal catalytic CO2 reduction. The Ag/g-C3N4 exhibits higher photocatalytic CO2 reduction activity under UV-vis light; the CH4 and CO evolution rates are 10.44 and 88.79 µmol·h-1·g-1, respectively. Enhanced photocatalytic CO2 reduction performances are attributed to efficient hot electron transfer in the Ag/g-C3N4 Schottky junction. LSPR-induced hot electrons from Ag nanoparticles improve the local reaction temperature and promote the separation and transfer of photogenerated electron-hole pairs. The charge carrier transfer route was investigated by in situ irradiated X-ray photoelectron spectroscopy (XPS). The three-dimensional finite-difference time-domain (3D-FDTD) method verified the strong electromagnetic field at the interface between Ag and g-C3N4. The photothermal catalytic CO2 reduction pathway of Ag/g-C3N4 was investigated using in situ diffuse reflectance infrared Fourier transform spectra (DRIFTS). This study examines hot electron transfer in the Ag/g-C3N4 Schottky junction and provides a feasible way to design a plasmonic metal/polymer semiconductor Schottky junction for photothermal catalytic CO2 reduction.

Oxygen-bridged Schottky junction in ZnO-Ni3ZnC0.7 promotes photocatalytic reduction of CO2 to CO: Steering charge flow and modulating electron density of active sites.

Developing carbon dioxide (CO2) photocatalysts from transition metal carbides (TMCs) with abundant active sites, modulable electron cloud density, as well as low cost and high stability is of great significance for artificial photosynthesis. Building an efficient electron transfer channel between the photo-excitation site and the reaction-active site to extract and steer photo-induced electron flow is necessary but challenging for the highly selective conversion of CO2. In this study, we achieved an oxygen-bridged Schottky junction between ZnO and Ni3ZnC0.7 (denoted as Znoxide-O-ZnTMC) through a ligand-vacancy strategy of MOF. The ZnO-Ni3ZnC0.7 heterostructure integrates the photo-exciter (ZnO), high-speed electron transport channel (Znoxide-O-ZnTMC), and reaction-active species (Ni3ZnC0.7), where Znoxide-O-ZnTMC facilitates the transfer of excited electrons in ZnO to Ni3ZnC0.7. The Zn atoms in Ni3ZnC0.7 serve as electron-rich active sites, regulating the CO2 adsorption energy, promoting the transformation of *COOH to CO, and inhibiting H2 production. The ZnO-Ni3ZnC0.7 shows a high CO yield of 2674.80 µmol g-1h-1 with a selectivity of 93.40 % and an apparent quantum yield of 18.30 % (λ = 420 nm) with triethanolamine as a sacrificial agent. The CO production rate remains at 96.40 % after 18 h. Notably, ZnO-Ni3ZnC0.7 exhibits a high CO yield of 873.60 µmol g-1h-1 with a selectivity of 90.20 % in seawater.

Van der Waals Schottky Junction Photodetector with Ultrahigh Rectifying Ratio and Switchable Photocurrent Generation.

Metal-semiconductor junctions play an important role in the development of electronic and optoelectronic devices. A Schottky junction photodetector based on two-dimensional (2D) materials is promising for self-powered photodetection with fast response speed and large signal-to-noise ratio. However, it usually suffers from an uncontrolled Schottky barrier due to the Fermi level pinning effect arising from the interface states. In this work, all-2D Schottky junctions with near-ideal Fermi level depinning are realized, attributed to the high-quality interface between 2D semimetals and semiconductors. We further demonstrate asymmetric diodes based on multilayer graphene/MoS2/PtSe2 with a current rectification ratio exceeding 105 and an ideality factor of 1.2. Scanning photocurrent mapping shows that the photocurrent generation mechanism in the heterostructure switches from photovoltaic effect to photogating effect at varying drain biases, indicating both energy conversion and optical sensing are realized in a single device. In the photovoltaic mode, the photodetector is self-powered with a response time smaller than 100 µs under the illumination of a 405 nm laser. In the photogating mode, the photodetector exhibits a high responsivity up to 460 A/W originating from a high photogain. Finally, the photodetector is employed for single-pixel imaging, demonstrating its high-contrast photodetection ability. This work provides insight into the development of high-performance self-powered photodetectors based on 2D Schottky junctions.

Edge-enhanced super microgenerator based on a two-dimensional Schottky junction.

Super microgenerator (SMG) refers to a generator that can efficiently convert extremely weak external stimuli into electrical energy and has a small size, high power density and long lifespan, offer ground-breaking solutions for powering wearable devices, wireless distributed sensors and implanted medical equipment. However, the friction and wear between the interfaces of ordinary microgenerator results in an extremely low lifespan. Here, we present a prototype of SMGs based on a 2D-2D (graphite-MoS2) Schottky contact in the state of structural superlubricity (no wear and nearly zero friction between two contacted solid surfaces). What is even more interesting is when the graphite flake is slid from the bulk to the edge of MoS2, the output current will enhance from 31 to 56 A m-2. Through the I-V curve measurement, we found that the conductive channel across the junction can be activated and further enhanced at the edge of MoS2compare to bulk, which provide the explanation for the above-mentioned edge enhancement of power generation. Above results provide the design principles of high-performance SMGs based on 2D-2D Schottky junctions.

A Schottky/Z-Scheme Hybrid for Augmented Photocatalytic H2 and H2O2 Production.

The prodigious employment of fossil fuels to conquer the global energy demand is becoming a dreadful threat to the human society. This predicament is appealing for a potent photocatalyst that can generate alternate energy sources via solar to chemical energy conversion. With this interest, we have fabricated a ternary heterostructure of Ti3C2 nanosheet modified g-C3N4/Bi2O3 (MCNRBO) Z-scheme photocatalyst through self-assembly process. The morphological analysis clearly evidenced the close interfacial interaction between g-C3N4 nanorod, Bi2O3 and Ti3C2 nanosheets. The oxygen vacancy created on Bi2O3 surface, as suggested by XPS and EPR analysis, supported the Z-scheme heterojunction formation between g-C3N4 nanorod and Bi2O3 nanosheets. The collaborative effect of Z-scheme and Schottky junction significantly reduced charge transfer resistance promoting separation efficiency of excitons as indicated from PL and EIS analysis. The potential of MCNRBO towards photocatalytic application was investigated by H2O2 and H2 evolution reaction. A superior photocatalytic H2O2 and H2 production rate for MCNRBO is observed, which are respectively around 5 and 18 folds higher as compared to pristine CNR nanorod. The present work encourages for the development of a noble, eco-benign and immensely efficient dual heterojunction based photocatalyst, which can acts as saviour of human society from energy crisis.

Schottky Junctions with Bi@Bi2MoO6 Core-Shell Photocatalysts toward High-Efficiency Solar N2-to-Ammonnia Conversion in Aqueous Phase.

The photocatalytic nitrogen reduction reaction (NRR) in aqueous solution is a green and sustainable strategy for ammonia production. Nonetheless, the efficiency of the process still has a wide gap compared to that of the Haber-Bosch one due to the difficulty of N2 activation and the quick recombination of photo-generated carriers. Herein, a core-shell Bi@Bi2MoO6 microsphere through constructing Schottky junctions has been explored as a robust photocatalyst toward N2 reduction to NH3. Metal Bi self-reduced onto Bi2MoO6 not only spurs the photo-generated electron and hole separation owing to the Schottky junction at the interface of Bi and Bi2MoO6 but also promotes N2 adsorption and activation at Bi active sites synchronously. As a result, the yield of the photocatalytic N2-to-ammonia conversion reaches up to 173.40 µmol g-1 on core-shell Bi@Bi2MoO6 photocatalysts, as much as two times of that of bare Bi2MoO6. This work provides a new design for the decarbonization of the nitrogen reduction reaction by the utilization of renewable energy sources.

Preparation of hollow double-layer Pt@CeO2 nanospheres as oxidase mimetics for the colorimetric-fluorescent-SERS triple-mode detection of glutathione in serum.

Glutathione (GSH) is an essential antioxidant in the human body, but its detection is difficult due to the interference of complex components in serum. Herein, hollow double-layer Pt@CeO2 nanospheres were developed as oxidase mimetics, and the light-assisted oxidase mimetics effects were found. The oxidase activity was enhanced significantly by utilizing the synergistic effect of Schottky junction and the localized surface plasmon resonance (LSPR) of Pt under UV light. A novel GSH colorimetric-fluorescent-SERS sensing platform was established, with the sensing performance notably boosted by using the light-assisted oxidase mimetics effects. This platform boasts an exceptionally low detection limit (LOD) of 0.084 µM, while the detection time was shortened from 10 min to just 2 min. The anti-interference detection with high recovery rate (96.84%-107.4 %) in real serum made it be promising for practical application.

High-Performance Memristive Synapse Composed of Ferroelectric ZnVO-Based Schottky Junction.

In pursuit of realizing neuromorphic computing devices, we demonstrated the high-performance synaptic functions on the top-to-bottom Au/ZnVO/Pt two-terminal ferroelectric Schottky junction (FSJ) device architecture. The active layer of ZnVO exhibited the ferroelectric characteristics because of the broken lattice-translational symmetry, arising from the incorporation of smaller V5+ ions into smaller Zn2+ host lattice sites. The fabricated FSJ devices displayed an asymmetric hysteresis behavior attributed to the ferroelectric polarization-dependent Schottky field-emission rate difference in between positive and negative bias voltage regions. Additionally, it was observed that the magnitude of the on-state current could be systematically controlled by changing either the amplitude or the width of the applied voltage pulses. Owing to these voltage pulse-tunable multi-state memory characteristics, the device revealed diverse synaptic functions such as short-term memory, dynamic range-tunable long-term memory, and versatile rules in spike time-dependent synaptic plasticity. For the pattern-recognition simulation, furthermore, more than 95% accuracy was recorded when using the optimized experimental device parameters. These findings suggest the ZnVO-based FSJ device holds significant promise for application in next-generation brain-inspired neuromorphic computing systems.

Construction of MXene/Bi2WO6 Schottky Junction for Highly Efficient Piezocatalytic Hydrogen Evolution and Unraveling Mechanism.

For the first time, a series of MXene (Ti3C2Tx)/Bi2WO6 Schottky junction piezocatalysts were constructed, and the piezocatalytic hydrogen evolution activity was explored. Optimal Ti3C2Tx/Bi2WO6 exhibits the highest piezocatalytic hydrogen evolution rate of 764.4 µmol g-1 h-1, which is nearly 8 times higher than that of pure Ti3C2Tx and twice as high as that of Bi2WO6. This value also surpasses that of most recently reported typical piezocatalysts. Moreover, related experimental results and density functional theory calculations reveal that Ti3C2Tx/Bi2WO6 can provide unique channels for efficient electron transfer, enhance piezoelectric properties, optimize the adsorption Gibbs free energy of water, reduce activation energy for hydrogen atoms, endow robust separation capacity of charge carrier, and restrict the electron-hole recombination rate, thus significantly promoting the efficiency of hydrogen evolution reaction. Ultimately, we have unraveled an innovative piezocatalytic mechanism. This work broadens the scope of MXene materials in a sustainable energy piezocatalysis application.

Flexocatalytic Reduction of Tumor Interstitial Fluid/Solid Pressure for Efficient Nanodrug Penetration.

The practical efficacy of nanomedicines for treating solid tumors is frequently low, predominantly due to the elevated interstitial pressure within such tumors that obstructs the penetration of nanomedicines. This increased interstitial pressure originates from both liquid and solid stresses related to an undeveloped vascular network and excessive fibroblast proliferation. To specifically resolve the penetration issues of nanomedicines for tumor treatment, this study introduces a holistic "dual-faceted" approach. A treatment platform predicated on the WS2/Pt Schottky heterojunction was adopted, and flexocatalysis technology was used to disintegrate tumor interstitial fluids, thus producing oxygen and reactive oxygen species and effectively mitigating the interstitial fluid pressure. The chemotherapeutic agent curcumin was incorporated to further suppress the activity of cancer-associated fibroblasts, minimize collagen deposition in the extracellular matrix, and alleviate solid stress. Nanomedicines achieve homologous targeting by enveloping the tumor cell membrane. It was found that this multidimensional strategy not only alleviated the high-pressure milieu of the tumor interstitium─which enhanced the efficiency of nanomedicine delivery─but also triggered tumor cell apoptosis via the generated reactive oxygen species and modulated the tumor microenvironment. This, in turn, amplified immune responses, substantially optimizing the therapeutic impacts of nanomedicines.

Piezocatalytic Schottky Junction Treats Atherosclerosis by a Biomimetic Trojan Horse Strategy.

The atherosclerotic vulnerable plaque is characterized by the foamy macrophage burden, involving impaired cholesterol efflux and deficient efferocytosis. Correspondingly, piezocatalytic therapy is an emerging solution for eliminating the foamy macrophage burden with satisfactory spatiotemporal controllability and deep penetration depth. Herein, a biomimetic Trojan horse (Au-ZnO@MM) is engineered by coating the macrophage membrane (MM) onto the surface of a rod-like Au-ZnO Schottky Junction to effectively relieve the atherosclerotic progression. These Trojan horses with the coating of MM are actively transported into subsistent foamy macrophages and generate abundant reactive oxygen species (ROS) via ultrasound-activated piezocatalysis. ROS-initiated autophagy and mitochondrial dysfunction induce substantial cell apoptosis, alleviating the burden of subsistent foamy macrophages. The resulting apoptotic fragments further significantly facilitate cholesterol excretion and trigger efferocytosis of intraplaque fresh macrophages. Ultimately, the biomimetic Au-ZnO@MM piezocatalyst not only inhibits the foaming capacity of macrophages, but also improves the function of removing cell debris, which can stabilize atherosclerotic vulnerable plaque. Meanwhile, the plasmon resonance effect of integrated gold nanoparticles enables favorable photoacoustic molecular imaging for real-time image-guided atherosclerotic therapy. This proposed biomimetic Trojan horse strategy provides the paradigm of employing ultrasound-activated piezocatalytic methodology for enhanced atherosclerotic theranostics.

Molten salt synthesis of 1T/2H mixed phase MoS2 for boosting photocatalytic H2 evolution via Schottky junction under EY-sensitized system.

Clean H2 fuel obtained from the photocatalytic water splitting to hydrogen reaction could efficiently alleviate current energy crisis and the concomitant environmental pollution problems. Therefore, it is desirable to search for a highly efficient photocatalytic system to decrease the energy barrier of water splitting reaction. Herein, the 1T/2H mixed phase MoS2 sample with Schottky junction between contact interfaces is developed through molten salt synthesis for photocatalytic hydrogen production under a dye-sensitized system (Eosin Y-TEOA-MoS2) driven by the visible light. In mixed phase MoS2 sample, the photogenerated electrons of 2H-phase MoS2 migrated to the 1T-phase MoS2 are difficult to jump back because of the existence of Schottky barrier, which greatly suppresses the quenching of EY and therefore results in an enhanced hydrogen evolution performance. Therefore, the optimized MoS2 sample (MoS2-350) has an initial hydrogen evolution rate of 213 µmol h-1 and corresponding apparent quantum yield of 36.1 % at 420 nm, far higher than those of pure Eosin Y. It is strongly confirmed by the steady-state/time-resolved photoluminescence (PL) spectra and transient photocurrent response experiments. With the assistance of Density functional theory (DFT) calculation, the function of Schottky junction in photocatalytic hydrogen evolution reaction is well explained. In addition, a new and universal method (SVM curve) of judging oxidation or reduction quenching for photosensitizers is proposed.

Bioactive VS4-based sonosensitizer for robust chemodynamic, sonodynamic and osteogenic therapy of infected bone defects.

BACKGROUND: Most bone defects caused by bone disease or trauma are accompanied by infection, and there is a high risk of infection spread and defect expansion. Traditional clinical treatment plans often fail due to issues like antibiotic resistance and non-union of bones. Therefore, the treatment of infected bone defects requires a strategy that simultaneously achieves high antibacterial efficiency and promotes bone regeneration. RESULTS: In this study, an ultrasound responsive vanadium tetrasulfide-loaded MXene (VSM) Schottky junction is constructed for rapid methicillin-resistant staphylococcus aureus (MRSA) clearance and bone regeneration. Due to the peroxidase (POD)-like activity of VS4 and the abundant Schottky junctions, VSM has high electron-hole separation efficiency and a decreased band gap, exhibiting a strong chemodynamic and sonodynamic antibacterial efficiency of 94.03%. Under the stimulation of medical dose ultrasound, the steady release of vanadium element promotes the osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs). The in vivo application of VSM in infected tibial plateau bone defects of rats also has a great therapeutic effect, eliminating MRSA infection, then inhibiting inflammation and improving bone regeneration. CONCLUSION: The present work successfully develops an ultrasound responsive VS4-based versatile sonosensitizer for robust effective antibacterial and osteogenic therapy of infected bone defects.

Ti3C2@UiO-TCPP Schottky junction photoelectrochemical sensor for detecting alkaline phosphatase through the steric hindrance effect of phosphopeptide.

Alkaline phosphatase (ALP) is a major biomarker for clinical diagnosis, but detection methods of ALP are limited in sensitivity and selectivity. In this paper, a novel method for ALP determination is proposed. A photoelectrochemical (PEC) sensor was prepared by growing UiO-tetratopic tetrakis (4-carbox-yphenyl) porphyrin (TCPP) in situ between layered Ti3C2 through a one-pot hydrothermal method. The obtained Schottky heterojunction photoelectric material Ti3C2@UiO-TCPP not only has a large light absorption range but also greatly improves the efficiency of photogenerated electron hole separation and thereby enhances sensitivity for PEC detection. The phosphate group on the phosphorylated polypeptide was utilized to form a Zr-O-P bond with the zirconium ion on UiO-66, and then photocurrent decreases due to the steric hindrance effect of phosphorylated polypeptides, that is, the hindrance of electron transfer between the photoelectric material and a solution. The specific interaction between ALP and phosphorylated polypeptides shears the bond between phosphate and zirconium ion on UiO-66 in the peptides then weakens the hindrance effect and increases the photocurrent, thus realizing ALP detection. The linear range of ALP is 0.03-10,000 U·L-1, and the detection limit is 0.012 U·L-1. The method is highly sensitive and selective, and has been applied in detection of ALP in serum samples.

Asymmetric Schottky Barrier-Generated MoS2/WTe2 FET Biosensor Based on a Rectified Signal.

Field-effect transistor (FET) biosensors can be used to measure the charge information carried by biomolecules. However, insurmountable hysteresis in the long-term and large-range transfer characteristic curve exists and affects the measurements. Noise signal, caused by the interference coefficient of external factors, may destroy the quantitative analysis of trace targets in complex biological systems. In this report, a "rectified signal" in the output characteristic curve, instead of the "absolute value signal" in the transfer characteristic curve, is obtained and analyzed to solve these problems. The proposed asymmetric Schottky barrier-generated MoS2/WTe2 FET biosensor achieved a 105 rectified signal, sufficient reliability and stability (maintained for 60 days), ultra-sensitive detection (10 aM) of the Down syndrome-related DYRK1A gene, and excellent specificity in base recognition. This biosensor with a response range of 10 aM-100 pM has significant application potential in the screening and rapid diagnosis of Down syndrome.

Polarization- and Gate-Tunable Optoelectronic Reverse in 2D Semimetal/Semiconductor Photovoltaic Heterostructure.

Polarimetric photodetector can acquire higher resolution and more surface information of imaging targets in complex environments due to the identification of light polarization. To date, the existing technologies yet sustain the poor polarization sensitivity (<10), far from market application requirement. Here, the photovoltaic detectors with polarization- and gate-tunable optoelectronic reverse phenomenon are developed based on semimetal 1T'-MoTe2 and ambipolar WSe2 . The device exhibits gate-tunable reverse in rectifying and photovoltaic characters due to the directional inversion of energy band, yielding a wide range of current rectification ratio from 10-2 to 103 and a clear object imaging with 100 × 100 pixels. Acting as a polarimetric photodetector, the polarization ratio (PR) value can reach a steady state value of ≈30, which is compelling among the state-of-the-art 2D-based polarized detectors. The sign reversal of polarization-sensitive photocurrent by varying the light polarization angles is also observed, that can enable the PR value with a potential to cover possible numbers (1→+∞/-∞→-1). This work develops a photovoltaic detector with polarization- and gate-tunable optoelectronic reverse phenomenon, making a significant progress in polarimetric imaging and multifunction integration applications.