RESUMEN
An adaptable Fe(II) tetrahedral cage, [Fe4L4][BF4]8 (L = tris(4-(((E)-pyridin-2-ylmethylene)amino)phenyl) phosphate), has been synthesised via self-assembly. By modulating the orientation of its pendant P=O groups, the cage was found to be capable of encapsulating anionic, neutral, and cationic guests, which was confirmed in the solid state via single-crystal X-ray diffraction (SCXRD) and in solution by high-resolution mass spectroscopy (HR-MS), as well as by NMR (1H, 19F, 31P) studies where possible.
RESUMEN
Here we designed enantiomeric lipid-mimetic glutamic acid derivatives (L/D-UG) and investigated their self-assembled chiral nanostructures and performance with the protein adsorption as well as the osteogenesis. It was found that L or D-UG can self-assemble into vesicle bilayers and two-dimensional (2D) nanocrystals via a kinetic and thermodynamic control, respectively. These chiral vesicles and 2D crystals showed differentiated adsorption of proteins by their curvature and chirality. Specifically, fibronectin constituted by L-amino acids adsorbed preferentially on L-UG 2D crystal in a semi-random pattern and L-2D nanocrystal show as the most effective structures to promote bone regeneration. The controlled vesicle and 2D crystal assemblies with different chirality and curvature helps to clarify their determine roles in protein adsorption and osteogenesis.
RESUMEN
Gram-positive S. aureus is one of the leading pathogens for death associated with antimicrobial resistance. The ß-lactamase (Bla) secreted by methicillin-resistant S. aureus (MRSA) hydrolyzes nearly all ß-lactam antibiotics, leaving only a few antibiotics available for the clinical treatment of MRSA infections. Thereby, a Bla-responsive peptide (BLAP) is designed here with the capacity of inhibiting MRSA infection through mimicking the host defense mechanism of human defensin-6. The BLAP comprising a self-assembling peptide sequence can respond specifically to the secreted Bla and assemble in situ surrounding MRSA. The assembled nanofibrous network is able to trap MRSA, preventing its invasion into the host cells effectively. As a consequence, the intramuscular injection of BLAP significantly restricted bacterial infection and abscess formation in mice. The biomimetic BLAP holds great potential for the efficient treatment of drug-resistant gram-positive bacterial infections.
RESUMEN
Carbonized polymer dots (CPDs) have shown exceptional potential across a wide range of applications. However, their practical utilization is significantly greatly impeded by the lack of precise control over their structures and functionalities. Consequently, the development of controlled synthesis strategies for CPDs with well-defined structures and tailored functionalities remains a critical challenge in the field. Here, the controlled synthesis of functional CPDs with reversible assembly properties via airflow-assisted melt polymerization, followed by a one-step post-synthetic doping strategy, is reported. This synthetic approach achieves high product yield, uniform and tunable structures, as well as customized functionalities including solid-state emission, enhanced catalytic performance (3.5-45 times higher than conventional methods), and selective gas storage in the resulting CPDs. The ability to tailor the properties of CPDs through controlled synthesis opens up new opportunities for their practical application in photocatalysis and gas storage.
RESUMEN
Diphenylalanine(FF)-Zn self-assembly (FS) confined in covalent organic polymers (FS@COPs) with efficient fluorescence was synthesized for fluorescence sensing of biogenic amines, which was one of the most important indicators for monitoring food freshness. FS@COPs combined excellent biodegradability of self-assembled dipeptide with chemical stability, porosity and targeted site recognition of COPs. With an optimal excitation wavelength of 360 nm and an optimal emission wavelength of 450 nm, FS@COPs could be used as fluorescence probes to rapidly visualize and highly sensitive determination of tryptamine (Try) within 15 min, and the linear range was from 40 to 900 µg L-1 with a detection limit of 63.08 µg kg-1. Importantly, the FS@COPs showed a high fluorescence quantum yield of 11.28%, and good stability, solubility, and selectivity, which could successfully achieve the rapid, accurate and highly sensitive identification of Try. Furthermore, we revealed the mechanism of FS@COPs for fluorescence sensing of targets. The FS@COPs system was applied to the fluorescence sensing of Try in real samples and showed satisfactory accuracy of 93.02%-105.25%.
Asunto(s)
Dipéptidos , Colorantes Fluorescentes , Límite de Detección , Espectrometría de Fluorescencia , Triptaminas , Triptaminas/análisis , Triptaminas/química , Dipéptidos/química , Dipéptidos/análisis , Colorantes Fluorescentes/química , Espectrometría de Fluorescencia/métodos , Productos de la Carne/análisis , Polímeros/químicaRESUMEN
Achieving structural reconfiguration of supramolecular bottlebrush block copolymers toward topological engineering is of particular interest but challenging. Here, we address the creation of supramolecular architectures to discover how assembled topology influences the structured aggregates, combining hydrogen-bonded (H-bonded) bottlebrush block copolymers and electrostatic interaction induced polymer/inorganic eutectics. We first design H-bonding linear-brush block copolymer P(NBDAP-co-NBC)-b-P(NBPEO), bearing linear block P(NBDAP-co-NBC) (poly(norbornene-terminated diaminopyridine-co-norbornene-terminated hexane)) with pendant H-bonding DAP (diaminopyridine) motifs, and PEO (poly(ethylene oxide)) densely grafted P(NBPEO) brush block. Thanks to H-bonding association between DAP and thymine (Thy), incorporation of Thy-functionalized polystyrene (Thy-PS) enables solution self-assembly and formation of H-bonded bottlebrush block copolymers, generating augmented nanospheres with increasing Thy-PS amount. Noteworthy that integration of inorganic cluster silicotungstic acid (STA) to P(NBC-co-NBDAP)-b-P(NBPEO), endows the formation of PEO/STA eutectic core. Therefore, co-crystallization-assistant self-assembly at the interfaces of polymeric, inorganic and supramolecular chemistry is realized, reflecting multi-stage morphology transformation from hexagonal platelets, needle-like, curved rod-like micelles, finally to end-to-end closed rings, by gradually increasing Thy-PS while fixing STA content. Interestingly, such solution self-assembly to co-crystallization-assistant self-assembly strategy not only endows unique nanostructure transition, also induce in-to-out switch of PS domains. These findings clearly provide unique methodology towards programmable fabrication of geometrical objects promising in smart materials.
RESUMEN
A novel room-temperature liquid crystal of tetraphenylethylene derivative (TPE-DHAB) was synthesized using an ionic self-assembly strategy. The TPE-DHAB complex exhibits typical aggregation-induced emission properties and a unique helical supramolecular structure. Moreover, the generation and handedness inversion of circularly polarized luminescence (CPL) can be achieved through further chiral solvation, providing a facile approach to fabricate room-temperature liquid crystalline materials with controllable supramolecular structures and tunable CPL properties through a synergistic strategy of ionic self-assembly and chiral solvation process.
RESUMEN
A magnetically responsive photonic crystal of colloidal nanosheets can exhibit a controllable structural color, offering diverse potential applications. In this study, we systematically investigated how the lateral sizes of graphene oxide (GO) nanosheets affect their magnetic responsiveness in a photonic system. Contrary to the prediction that larger lateral sizes of nanosheets would be more responsive to an applied magnetic field based on the magnetic energy of anisotropic materials, we discovered that GO nanosheets with larger lateral sizes in the photonic system scarcely responded to a 12 T magnetic field. The lack of magnetic response may be due to the strongly restricted rotational motion of GO nanosheets by mutual electrostatic forces. In contrast, GO nanosheets with medium lateral sizes readily responded to the 12 T magnetic field, forming a uniaxially oriented structure that resulted in a vivid structural color. However, smaller GO nanosheets displayed a less vivid structural color, possibly because of less structural ordering of GO nanosheets. Finally, we found that the photonic crystal of GO nanosheets with optimized lateral sizes responded effectively to the 12 T magnetic field across various GO concentrations, resulting in a vivid and tunable structural color.
RESUMEN
Carrier-free nanodrugs are a novel type of drug constructed by the self-assembly of drug molecules without carrier involvement. They have the characteristics of small particle size, easy penetration of various barriers, targeting tumors, and efficient release. In recent years, carrier-free nanodrugs have become a hot topic in tumor therapy as they solve the problems of low drug loading, poor biocompatibility, and low uptake efficiency of carrier nanodrugs. A series of recent studies have shown that carrier-free nanodrugs play a vital role in the treatment of various tumors, with similar or better effects than carrier nanodrugs. Based on the literature published in the past decades, this paper first summarizes the recent progress in the assembly modes of carrier-free nanodrugs, then describes common therapeutic modalities of carrier-free nanodrugs in tumor therapy, and finally depicts the existing challenges along with future trends of carrier-free nanodrugs. We hope that this review can guide the design and application of carrier-free nanodrugs in the future.
RESUMEN
IL-1ß is a principal proinflammatory cytokine underlying multiple local and systemic chronic inflammatory conditions including psoriasis, rheumatoid arthritis, inflammatory bowel disease, and type 2 diabetes. Passive immunotherapies and biologic drugs targeting IL-1ß, while offering significant clinical benefit, nevertheless have limitations such as significant non-response rates, induction of anti-drug antibodies, and high costs. Here, an active immunotherapy raising antibody responses against IL-1ß employing self-assembling peptide nanofibers is described. The nanofibers contain defined quantities of B-cell epitopes from IL-1ß and exogenous T helper epitopes and employ the Q11 self-assembling peptide platform. Without adjuvant, the nanofibers raised durable anti-IL-1ß antibody responses that inhibit IL-1ß activity in vitro and in vivo. In a mouse model of imiquimod-induced psoriasis, prophylactic immunizations with the nanofibers diminished symptoms of epidermal thickening. This therapeutic effect is associated with biasing the immune response toward an anti-inflammatory IgG1/Th2 phenotype and a lowered expression of proinflammatory genes in the skin. Further, anti-IL-1ß nanofibers induced therapeutic immunosuppressive CD62L+ Treg cells. This technology represents a potential alternative for passive immunotherapies and other biologics for treating chronic inflammatory conditions.
RESUMEN
High entropy material (HEM) has emerged as an appealing material platform for various applications, and specifically, the electrochemical performances of HEM could be further improved through self-assembled structure design. However, it remains a big challenge to construct such high-entropy self-assemblies primarily due to the compositional complexity. Herein, we propose a bottom-up directional freezing route to self-assemble high-entropy hydrosols into porous nanosheets. Taking Prussian blue analogue (PBA) as an example, the simultaneous coordination-substitution reactions yield stable high-entropy PBA hydrosols. During subsequent directional freezing process, the anisotropic growth of ice crystals could guide the two-dimensional confined assembly of colloidal nanoparticles, resulting in high-entropy PBA nanosheets (HE-PBA NSs). Thanks to the high-entropy and self-assembled structure design, the HE-PBA NSs manifests markedly enhanced sodium storage kinetics and performances in comparison with medium/low entropy nanosheets and high entropy nanoparticles.
RESUMEN
Ferritins are natural proteins which spontaneously self-assemble forming hollow nanocages physiologically deputed to iron storage and homeostasis. Thanks to their high stability and easy production in vitro, ferritins represent an intriguing system for nanobiotechnology. Here we investigated the mechanism of disassembly and reassembly of a human recombinant ferritin constituted by the heavy chain (hHFt) exploiting a new procedure which involves the use of minimal amounts of sodium dodecyl sulfate (SDS) and assessed its effectiveness in comparison with two commonly used protocols based on pH shift at highly acidic and alkaline values. The interest in this ferritin as drug nanocarrier is related to the strong affinity of the human H-chain for the transferrin receptor TfR-1, overexpressed in several tumoral cell lines. Using different techniques, like NMR, TEM and DLS, we demonstrated that the small concentrations of SDS can eliminate the nanocage architecture without detaching the monomers from each other, which instead remain strongly associated. Following this procedure, we encapsulated into the nanocage a small ruthenium complex with a remarkable improvement with respect to previous protocols in terms of yield, structural integrity of the recovered protein and encapsulation efficiency. In our opinion, the extensive network of interchain interactions preserved during the SDS-based disassembly procedure represents the key for a complete and correct hHFt reassembly.
RESUMEN
Molecular robotics is challenging, so it seems best to keep it simple. We consider an abstract molecular robotics model based on simple folding instructions that execute asynchronously. Turning Machines are a simple 1D to 2D folding model, also easily generalisable to 2D to 3D folding. A Turning Machine starts out as a line of connected monomers in the discrete plane, each with an associated turning number. A monomer turns relative to its neighbours, executing a unit-distance translation that drags other monomers along with it, and through collective motion the initial set of monomers eventually folds into a programmed shape. We provide a suite of tools for reasoning about Turning Machines by fully characterising their ability to execute line rotations: executing an almost-full line rotation of 5 π / 3 radians is possible, yet a full 2 π rotation is impossible. Furthermore, line rotations up to 5 π / 3 are executed efficiently, in O ( log n ) expected time in our continuous time Markov chain time model. We then show that such line-rotations represent a fundamental primitive in the model, by using them to efficiently and asynchronously fold shapes. In particular, arbitrarily large zig-zag-rastered squares and zig-zag paths are foldable, as are y-monotone shapes albeit with error (bounded by perimeter length). Finally, we give shapes that despite having paths that traverse all their points, are in fact impossible to fold, as well as techniques for folding certain classes of (scaled) shapes without error. Our approach relies on careful geometric-based analyses of the feats possible and impossible by a very simple robotic system, and pushes conceptional hardness towards mathematical analysis and away from molecular implementation.
RESUMEN
Covalent polymer chains are known to undergo mechanochemical events when subjected to mechanical forces. Such force-coupled reactions, like C-C bond scission in homopolymers, typically occur in a non-selective manner but with a higher probability at the mid-chain. In contrast, block copolymers (BCPs), composed of two or more chemically distinct chains linked by covalent bonds, have recently been shown to exhibit significantly different mechanochemical reactivities and selectivities. These differences may be attributable to the atypical conformations adopted by their chains, compared to the regular random coil. Beyond individual molecules, when BCPs self-assemble into ordered aggregates in solution, the non-covalent interactions between the chains lead to meaningful acceleration in the activation of embedded force-sensitive motifs. Furthermore, the microphase segregation of BCPs in bulk creates periodically dispersed polydomains, locking the blocks in specific conformations which have also been shown to affect their mechanochemical reactivity, with different morphologies influencing reactivity to varying extents. This review summarizes the studies of mechanochemistry in BCPs over the past two decades, from the molecular level to assemblies, and up to bulk materials.
RESUMEN
Type I photodynamic therapy (PDT) generates reactive oxygen species (ROS) through oxygen-independent photoreactions, making it a promising method for treating hypoxic tumors. However, the superoxide anion (O2â-) generated usually exhibits a low oxidation capacity, restricting the antitumor efficacy of PDT in clinical practice. Herein, a photoactivated self-assembled nanoreactor (1-NBS@CeO2) is designed through integration of type I PDT and cerium oxide (CeO2) nanozymes for inducing cascade-amplified oxidative stress in hypoxic tumors. The nanoreactor is constructed though co-assembly of an amphiphilic peptide (1-NBS) and CeO2, giving well-dispersed spherical nanoparticles with enhanced superoxide dismutase (SOD)-like and peroxidase (POD)-like activities. Following light irradiation, 1-NBS@CeO2 undergoes type I photoreactions to generated O2â-, which is further catalyzed by the nanoreactors, ultimately forming hypertoxic hydroxyl radical (âOH) through cascade-amplified reactions. The PDT treatment using 1-NBS@CeO2 results in elevation of intracellular ROS and depletion of GSH content in A375 cells, thereby inducing mitochondrial dysfunction and triggering apoptosis and ferroptosis of tumor cells. Importantly, intravenous administration of 1-NBS@CeO2 alongside light irradiation showcases enhances antitumor efficacy and satisfactory biocompatibility in vivo. Together, the self-assembled nanoreactor facilitates cascade-amplified photoreactions for achieving efficacious type I PDT, which holds great promise in developing therapeutic modules towards hypoxic tumors.
RESUMEN
In this work, a core substituted NMI-conjugated dipeptide (4MNLV) was extensively studied in mixed solvent systems to explore the polarity effect on the self-assembly pattern and their photophysical property. 4MNLV adopted a J- or H- type aggregation pattern depending upon the polarity index of the solvent system chosen. The self-assembly process was achieved through the anti-solvent effect. UV-vis study suggested that if the stock solution of 4MNLV was diluted with a relatively more polar solvent (compared to the stock solvent), then the system acquired J- type of aggregation pattern by showing a red-shift in their absorption maxima (λmax). Conversely, when the stock was diluted by a relatively less polar solvent, H-type of aggregation was observed where blue shift of λmax was noticed. The emission spectra and the lifetime of the self-assembled materials were also influenced by the chosen solvent system. The chirotopic behaviour of these self-assembled materials was studied through CD spectroscopy. Morphological study indicated the formation of helical nanofibrillar structures. The bright green fluorescence of these highly biocompatible naphthalimide-peptide conjugate was used for cell imaging application, indicating its futuristic scope.
RESUMEN
HYPOTHESIS: Antimicrobial resistance (AMR) is a pressing global health concern. ESKAPEE pathogens, such as Methicillin-resistant Staphylococcus aureus (MRSA) are notable of concern in healthcare settings due to their resistance to critical antibiotics. To combat AMR, the development of alternatives such as bacterial membrane-active agents is crucial. Fatty acids (FAs) have emerged as a sustainable, antibiotic-free solution with inherent antibacterial activity. However, long chain saturated fatty acids (LCFAs) sodium soaps exhibit poorly antibacterial properties in comparison to short chain FAs, believed to be linked to limited solubility in aqueous media. EXPERIMENTS: We employed choline as a chaotropic organic counter-ion to enhance the solubility of LCFAs and investigated their antibacterial effects against MRSA. The optimal medium conditions for micelle formation for LCFAs was first investigated. Then, we determined the critical micelle concentration (CMC), micellar morphology, and aggregation number through surface tension measurements and small angle neutron scattering experiments. Antimicrobial activity was assessed using minimum bactericidal concentration (MBC) assays and time-kill experiments. FINDINGS: We have identified conditions where LCFAs are effective against MRSA for the first time, providing valuable insights for developing new antibacterial agents to fight AMR. LCFAs need to be used above their Krafft temperatures and CMC to exhibit antibacterial efficacy.
RESUMEN
Selling products in kit form to consumers benefits both manufacturers and consumers - provided the instructions enable the customer to assemble the components correctly and safely. Poor usability of some self-assembly instructions is a continuing cause of consumer complaints- but the subject of only occasional ergonomics research interest. Relevant studies are widely dispersed across the literature - and across decades - but their findings generally agree on what makes some self-assembly illustrations more effective than others. This has just not been consolidated in any formally recognised guidance. This study has produced a comprehensive review of published work on the usability of self-assembly instructions (which need to convey most information pictorially) and makes detailed recommendations for best practice in their presentation. The evidence for the recommended best practices discussed in this paper will be reflected in the publication of an international standard that which is currently in the final drafting stages.
This review of published research into effective presentational techniques for self-assembly instructions was instigated to support a proposal for an international standard. That is now under development incorporating requirements based on the high degree of consensus the review found across a wide spread of types of study, locations and years.
RESUMEN
HYPOTHESIS: Multi-walled tubular aggregates formed by hierarchical self-assembly of beta-cyclodextrin (ß-CD) and sodium dodecylsulfate (SDS) hold a great potential as microcarriers. However, the underlying mechanism for this self-assembly is not well understood. To advance the application of these structures, it is essential to fine-tune the cavity size and comprehensively elucidate the energetic balance driving their formation: the bending modulus versus the microscopic line tension. EXPERIMENTS: We investigated temperature-induced changes in the hierarchical tubular aggregates using synchrotron small-angle X-ray scattering across a broad concentration range. Detailed analysis of the scattering patterns enabled us to determine the structural parameters of the microtubes and to construct a phase diagram of the system. FINDINGS: The microtubes grow from the outside in and melt from the inside out. We relate derived structural parameters to enthalpic changes driving the self-assembly process on the molecular level in terms of their bending modulus and microscopic line tension. We find that the conformation of the crystalline bilayer affects the saturation concentration, providing an example of a phenomenon we call conformational freezing point depression. Inspired by the colligative phenomenon of freezing point depression, well known from undergraduate physics, we model this system by including the membrane conformation, which can describe the energetics of this hierarchical system and give access to microscopic properties without free parameters.
RESUMEN
Physical chemistry aspects are emphasized in this comprehensive review of self-assembly phenomena involving lignin in various forms. Attention to this topic is justified by the very high availability, low cost, and renewable nature of lignin, together with opportunities to manufacture diverse products, for instance, polymers/resins, bioplastics, carbon fibers, bio-asphalt, sunscreen components, hydrophobic layers, and microcapsules. The colloidal lignin material, nanoparticles, and microstructures that can be formed as a result of changes in solvent properties, pH, or other adjustments to a suspending medium have been shown to depend on many factors. Such factors are examined in this work based on the concepts of self-assembly, which can be defined as an organizing principle dependent on specific attributes of the starting entities themselves. As a means to promote such concepts and to facilitate further development of nano-scale lignin products, this article draws upon evidence from a wide range of studies. These include investigations of many different plant sources of lignin, processes of delignification, solvent systems, anti-solvent systems or other means of achieving phase separation, and diverse means of achieving colloidal stability (if desired) of resulting self-assembled lignin structures. Knowledge of the self-organization behavior of lignin can provide significant structural information to optimize the use of lignin in value-added applications. Examples include chemical conditions and preparation procedures in which lignin-related compounds of particles organize themselves as spheres, hollow spheres, surface-bound layers, and a variety of other structures. Published articles show that such processes can be influenced by the selection of lignin type, pulping or extraction processes, functional groups such as phenolic, carboxyl, and sulfonate, chemical derivatization reactions, solvent applications, aqueous conditions, and physical processes, such as agitation. Precipitation from non-aqueous solutions represents a key focus of lignin self-assembly research. The review also considers stabilization mechanisms of self-assembled lignin-related structures.