Aqueous PEIE Soaking on ZnO for Ultraviolet Light Activation-Free Organic Photovoltaic Modules.

Ultraviolet (UV) light is typically needed to activate inverted organic photovoltaics (OPVs) with zinc oxide (ZnO) as electron transporting layer (ETL) for higher efficiency. However, UV light is a major cause for the degradation of organic active layers in OPVs. This is a contradiction that UV light activation enhances the efficiency but UV illumination deteriorates the stability. It is important to solve this contradiction to develop UV light activation-free OPV devices. Herein, a method of aqueous polyethylenimine ethoxylated (PEIE) soaking on ZnO is reported to realize UV light activation-free OPV devices. The S-shape in current density-voltage (J-V) characteristics of devices tested without UV light activation is eliminated through the treatment of aqueous PEIE soaking on ZnO. The treatment reduces the oxygen adsorbates, which is confirmed by Kelvin probe and X-ray photoelectron spectroscopy. A 10.08 cm2 organic photovoltaic module with the treated ZnO as ETL showed high photovoltaic performance: VOC = 5.68 V, JSC = 2.7 mA cm-2, FF = 75.1%, and POutput = 11.5 mW cm-2 tested with the UV filter (light intensity of 0.788 sun). UV light activation is not needed for the modules to obtain high efficiency.

Dynamic water migration and flavor analysis of sea cucumber in the process of Sichuan pepper seasoning soak.

Soaking in seasoning solution is the main process of sea cucumber seasoning. This study analyzed the dynamic changes in water migration and flavor substances in sea cucumbers during soaking in a Sichuan pepper solution. It was found that the sea cucumber experienced a process of water absorption followed by water loss during the 0-48 h soaking process. During this period, the flavor compounds in sea cucumbers showed different dynamic trends. A total of 46 volatiles were identified, of which 29 were key flavor compounds. Its flavor profiles tended to stabilize as soaking time increased. m-Xylene, d-Limonene, Eucalyptol, p-Xylene, Sabinene, Beta-Myrcene, and Beta-Phellandrene were the main characteristic substances contributing to the differences in sea cucumber flavor. Correlation analysis predicted the relationship between water migration and the dynamic shifts in flavor compounds. This study provides a crucial reference for future studies on the processing and flavor modulation of sea cucumber products.

Effect of roasting temperature and soaking time on the nutritional, antinutrional and sensory properties of protein-based meat analog from lupine.

White lupine is a legume crop rich in adequate valuable nutrient profiles especially used as a possible source of proteins where animal-based proteins are scarce. However, there is little documented information about the effect of processing conditions to produce lupine protein-based meat analog. This study explores the impact of roasting temperature (raw, 130, 140, and 150 °C) and soaking time (raw, 2, 4, and 6 days) on the chemical compositions, physical quality, and sensory attributes of meat analog. The result showed that roasting at 140 °C and soaking for 4 days significantly increased (p˂0.05) the proximate and mineral contents of the meat analog. The highest protein content (82.46 %) was obtained at T2t2 (roasted at 140 °C and soaked for 4 days). While the lowest protein content (62.47 %) was observed at T3t3 (roasted at 150 °C and soaked for 4 days). Similarly, the highest (93.17 %) and lowest (79.47 %) cooking yields were obtained at T2t2 and T3t3 respectively. Roasting and soaking conditions also showed a significant effect (p˂0.05) on the anti-nutrient contents of meat analog. The highest overall sensory acceptability (6.40) of the meat analog was observed at T2t2. The research suggests that suitable processing conditions can enhance the nutritional profiles of lupine protein-based meat analog, potentially enabling its industrial production and global market entry.

Protective effects of ferulic acid on embryonic development by improving antioxidant function in broilers embryo of thermal manipulation.

This study aimed to elucidate the effects of broiler embryos soaked in ferulic acid (FA) solution on alleviating the negative impact of thermal manipulation (TM) on chicken embryo development and to provide a theoretical and experimental basis for applying TM and FA in the poultry feeding industry. A total of 120 broiler fertilized eggs were randomly divided into three groups: control group, TM group, and comprehensive group (TM + FA), with 40 eggs in each group. The TM group and the comprehensive group from the 7th embryonic age to the 16th embryonic age received TM for ten days, treated with a temperature of 39.5 °C and relative humidity of 65% for 18 h a day. In the comprehensive group, broiler embryos were immersed in FA solution at a concentration of 80 mg/L for 6 min at 16:00 every day from the 6th to the 8th embryo age. They were incubated continuously after being soaked until the chicks hatched. The results showed that the rates of dead embryos and weak chicks in the TM group were significantly higher than those in the control group and comprehensive group. Chick body temperatures of the TM group and comprehensive group were significantly lower than those of the control group. The heart weights of the TM group and comprehensive group were significantly lower than those of the control group, and the leg weights of the TM group were significantly decreased compared with those of the control group and comprehensive group. The SOD activity of serum in the comprehensive group was significantly higher than that in the control group and TM group, while the CAT activity of serum in the comprehensive group and control group was significantly higher than that in the TM group; however, there was no difference between the comprehensive group and control group. The activities of SOD and CAT in the liver were significantly higher than those of the TM group; however, the MDA content of the liver in the comprehensive group and control group was significantly lower than that of the TM group. The gene expression of Nrf2 and SOD in the comprehensive group and TM group was significantly higher than that in the control group; however, there was no significant difference between the comprehensive group and TM group. Soaking broiler embryonic eggs in an FA solution can improve the antioxidant capacity of the liver by upregulating Nrf2-Keap1 signal pathway-related gene expression. FA can effectively alleviate the side effects of TM on chicken embryos and does not impact the effects of TM.

Phenacetin promoted the rapid start-up and stable maintenance of partial nitrification: Responses of nitrifiers and antibiotic resistance genes.

Phenacetin (PNCT) belongs to one of the earliest synthetic antipyretics. However, impact of PNCT on nitrifying microorganisms in wastewater treatment plants and its potential microbial mechanism was still unclear. In this study, PN could be initiated within six days by PNCT anaerobic soaking treatment (8 mg/L). In order to improve the stable performance of PN, 21 times of PNCT aerobic soaking treatment every three days was conducted and PN was stabilized for 191 days. After PN was damaged, ten times of PNCT aerobic soaking treatment every three days was conducted and PN was recovered after once soaking, maintained over 88 days. Ammonia oxidizing bacteria might change the dominant oligotype to gradually adjust to PNCT, and the increase of abundance and activity of Nitrosomonas promoted the initiation of PN. For nitrite-oxidizing bacteria (NOB), the increase of Candidatus Nitrotoga and Nitrospira destroyed PN, but PN could be recovered after once aerobic soaking illustrating NOB was not resistant to PNCT. KEGG and COG analysis suggested PNCT might disrupt rTCA cycle of Nitrospira, resulting in the decrease of relative abundance of Nitrospira. Moreover, PNCT did not lead to the sharp increase of absolute abundances of antibiotic resistance genes (ARGs), and the risk of ARGs transmission was negligible.

Toward Monolayered Solar Cells: Luminescence Properties and Light Soaking in TMDs.

The optical and photonic characteristics of monolayer transition metal dichalcogenides (TMDs) play a pivotal role in their functionality as solar cell materials, light-emitting diodes (LEDs), and other electro-optical applications. In this study, we reveal the impact of prolonged illumination on the luminescence properties and Raman spectra of monolayered MoS2 and WS2─a process known as "light soaking". We find a light-induced transition from the physisorption to the chemisorption of ambient O2 and H2O molecules. In parallel, we observe the activation and passivation of defect sites in the samples (depending on their initial defect density), which is attributed to the adsorbed ambient molecules and the resulting light-driven interactions with defect sites. Thus, we can control the active defect density of monolayered TMDs and shed light on the fundamental mechanisms underlying their luminescence properties. Therefore, this work clarifies the source of changes to the luminescence properties of TMDs and opens the path toward their integration into advanced applications that may be affected by light soaking, such as solar cells and energy devices.

Effects of nanobubble water on digestate soaking hydrolysis of rice straw.

This study investigated the performance of combined nanobubble water (NW) and digestate in the soaking hydrolysis process. Two types of NW (CO2NW and O2NW) with digestate were used to soak rice straw for 1, 2, 3, 5, and 7 days. During soaking process, the volatile fatty acids (VFA) concentration in the treatment with O2NW and digestate for 3 days (O2NW-3 d) reached 7179.5 mg-HAc/L. Moreover, the highest specific methane yield (SMY) obtained in this treatment could reach 336.7 NmL/gVS. Although the addition of NW did not significantly increase SMY from digestate soaking, NW could accelerate the rate of methane production and reduce digestion time of T80. The enrichment of Enterobacter in the soaking process was observed when using CO2NW and O2NW as soaking solutions which played important roles in VFA production. This study provides a new insight into environment-friendly enhanced crop straw pretreatment, combining NW and digestate soaking hydrolysis.

Effects of Soaking and Germination Treatments on the Nutritional, Anti-Nutritional, and Bioactive Characteristics of Adzuki Beans (Vigna angularis L.) and Lima Beans (Phaseolus lunatus L.).

Lima beans (Phaseolus lunatus) and adzuki beans (Vigna angularis) are some of the most nutritious underutilized pulses that are significant in being used as basic ingredients for the preparation of various food products. The present study aimed to determine the impact of soaking and germination on nutritional and bioactive components, in vitro protein digestibility, reducing power, metal chelating capacity, antioxidant activity, and anti-nutritional components of lima and adzuki beans. The findings showed that during the germination treatment, the in vitro protein digestibility of lima and adzuki beans increased by 14.75 and 10.98%, respectively. There was an increase in the antioxidant activity of lima beans by 33.48% and adzuki beans by 71.14% after 72 h of germination, respectively. The reducing power assay of lima and adzuki beans indicated an increase of 49.52 and 36.42%, respectively, during germination. Similarly, the flavonoid and metal chelating activity increased in lima and adzuki beans after 72 h of germination. In contrast, the anti-nutrients, such as phytic acid, tannin content, and trypsin inhibitor activity, decreased significantly p < 0.05 after 72 h of germination. These results are encouraging and allow for utilizing the flour obtained from the germinated beans in functional bakery products, which can contribute to eradicating protein deficiency among some population groups. At the same time, promoting soaking and germination of the beans as a way to enhance the nutritional quality and reduce anti-nutrients can contribute to the interest in these underutilized pulses. They could be seen as an additional tool to improve food security.

Integrated biorefinery approach for utilization of wood waste into levulinic acid and 2-Phenylethanol production under mild treatment conditions.

In a bid to explore the on-site biorefinery approach for conversion of forestry residues, lignocellulosic biomass into value-added products was studied. The bark white pine wood was subjected to the microwave technique of fast and slow hydrolysis under varying acid and biomass concentrations to produce levulinic acid (LA). The HCl (2% v/v) and plant biomass (1% w/v) were identified as the optimum conditions for fast wood hydrolysis (270 ºC for 12 sec), which led to maximum LA yield of 446.68 g/kgPB. The proposed sustainable approach is mild, quick, and utilized a very low concentration of the HCl for the production of LA. The hydrolysate was used as a medium for Kluyveromyces marxianus growth to produce 2-phenylethanol (2-PE). K. marxianus used 74-95% of furfural from hydrolysate as a co-substrate to grow. The proposed model of the integrated biorefinery is an affordable on-site approach of using forest waste into localized solutions to produce LA and 2-PE.

Determination of the maximum bioaccumulation capacity of various metals in leaves of two Tillandsia species.

Tillandsia species are plants from the Bromeliaceae family which display biomonitoring capacities in both active and passive modes. The bioaccumulation potential of Tillandsia aeranthos (Loisiel.) Desf. and Tillandsia bergeri Mez acclimated to Southern/Mediterranean Europe has never been studied. More generally, few studies have detailed the maximum accumulation potential of Tillandsia leaves through controlled experiments. The aim of this study is to evaluate the maximum accumulation values of seven metals (Co, Cu, Mn, Ni, Pb, Pt, and Zn) in T. aeranthos and T. bergeri leaves. Plants were immersed in different mono elemental metallic solutions of Co (II), Cu (II), Mn (II), Ni (II), Pb (II), Pt (IV), and Zn (II) ions at different concentrations. In addition, cocktail solutions of these seven metals at different concentrations were prepared to study the main differences and the potential selectivity between metals. After exposure, the content of these metals in the leaves were measured by inductively coupled plasma-optical emission spectrometry. Data sets were evaluated by a fitted regression hyperbola model and principal component analysis, maximum metal loading capacity, and thermodynamic affinity constant were determined. The results showed important differences between the two species, with T. bergeri demonstrating higher capacity and affinity for metals than T. aeranthos. Furthermore, between the seven metals, Pb and Ni showed higher enrichment factors (EF). T. bergeri might be a better bioaccumulator than T. aeranthos with marked selectivity for Pb and Ni, metals of concern in air quality biomonitoring.

The development of an egg-soaking method for delivering dsRNAs into spider mites.

Recently, the first sprayable RNAi biopesticide, Ledprona, against the Colorado potato beetle, Leptinotarsa decemlineata, has been registered at the United States Environmental Protection Agency. Spider mites (Acari: Tetranychidae), a group of destructive agricultural and horticultural pests, are notorious for rapid development of insecticide/acaricide resistance. The management options, on the other hand, are extremely limited. RNAi-based biopesticides offer a promising control alternative to address this emerging issue. In this study, we i) developed an egg-soaking dsRNA delivery method; ii) evaluated the factors influencing RNAi efficiency, and finally iii) investigated the potential mode of entry of this newly developed egg-soaking RNAi method. In comparison to other dsRNA delivery methods, egg-soaking method was the most efficient, convenient/practical, and cost-effective method for delivering dsRNAs into spider mites. RNAi efficiency of this RNAi method was affected by target genes, dsRNA concentration, developmental stages, and mite species. In general, the hawthorn spider mite, Amphitetranychus viennensis, is more sensitive to RNAi than the two-spotted spider mite, Tetranychus urticae, and both of them have dose-dependent RNAi effect. For different life stages, egg and larvae are the most sensitive life stages to dsRNAs. For different target genes, there is no apparent association between the suppression level and the resultant phenotype. Finally, we demonstrated that this egg-soaking RNAi method acts as both stomach and contact toxicity. Our combined results demonstrate the effectiveness of a topically applied dsRNA delivery method, and the potential of a spray induced gene silencing (SIGS) method as a control alternative for spider mites.

An efficient inoculation method to evaluate virulence differentiation of field strains of sugarcane smut fungus.

Sugarcane smut, caused by the fungal pathogen Sporisorium scitamineum, is a prominent threat to the sugarcane industry. The development of smut resistant varieties is the ultimate solution for controlling this disease, due to the lack of other efficient control methods. Artificial inoculation method is used to evaluate the virulence differentiation of pathogens. The mostly used artificial inoculation methods are soaking of the seed canes in the teliospore solution and injection of teliospores or haploid sporidia into the sugarcane sprouts. However, due to the infection nature of the pathogen that invades the sugarcane plant through meristem tissue of the sprout or shoot, the rate of successful infection is often low and fluctuated, resulting in low confidence of the assays. We recently reported a rapid and high-throughput inoculation method called plantlet soaking by using tissue culture-derived sugarcane plantlets as the test plants. Here, we compare different inoculation methods and report the characterization of parameters that may affect the sensitivity and efficiency of the plantlet soaking technique. The results showed that sugarcane plantlets were highly vulnerable to infection, even with the inoculum density at 6.0 × 105 basidial spores/ml, and this method could be applied to all varieties tested. Notably, varieties showing high smut resistance in the field exhibited high susceptibility when inoculated with the plantlet soaking method, suggesting that the plantlet soaking method is a good complement to the traditional methods for screening germplasms with internal resistance. In addition, this method could also be used to monitor the variation of cellular virulence of the smut pathogen strains in the field.

The effect of traditional Chinese medicine soaking method on the healing of diabetic foot ulcers: A meta-analysis.

Foot infections, sores or deep tissue damage from diabetes can be a serious psychological and physical injury. This paper aims at making meta-analyses on the therapeutic effects of traditional Chinese medicine (TCM) on diabetic foot ulcers. The Chinese National Knowledge Infrastructure, VIP Database, Wanfang Database and so on, has conducted a randomized controlled trial to evaluate the clinical effect of TCM soaking method for diabetes patients with diabetes. Literature has been determined to be included by computer search and by hand rough checks. The search period was from the creation of the database to October 2023. Review Manager 5.3 was used to analyse the meta data and evaluate it systematically. Altogether, 479 research was conducted in China's data base and 20 of them were eventually collected for the final statistical analysis. In all, 1361 patients were enrolled in the trials. The results indicated that TCM immersion in diabetic foot resulted in significantly improved obvious wound healing (OR, 3.2; 95% CI, 2.5, 4.09, p < 0.0001); results showed that TCM immersion therapy significantly increased the efficiency of effective wound healing (OR, 4.55; 95% CI, 3.25, 6.37, p < 0.001). Statistical significance was found. Using Egger's approach to detect publishing bias suggests that there is no risk of publishing bias in terms of marked wound healing and effective healing. Traditional Chinese drug immersion can increase obviously the recovery ratio and the effective recovery ratio of diabetic foot.

Massive continuous irrigation (MCI) and endoscopic debridement as an alternative treatment strategy for refractory abscess-fistula complexes.

OBJECTIVE: To evaluate the feasibility, safety, and efficacy of massive continuous irrigation (MCI) and endoscopic debridement for the treatment of refractory abscess-fistula complexes. METHODS: This was a retrospective single-center observational study involving 12 patients with refractory abscess-fistula complexes. All patients had experienced long-term treatment failure or had failed multiple treatment modalities. We used over two catheters and inserted them via the gastrointestinal (GI) tract or percutaneously to form a circulation pathway to achieve MCI of normal saline, endoscopic debridement was then performed. The treatment success rate, irrigation volume and treatment duration, time to abscess-fistula complex closure, intra-treatment complications, and recurrence rate were recorded. RESULTS: The treatment success rates were 100%. The median time of previous treatment was 32 days (range 7-912 days). The mean time from the use of the novel treatment strategy to abscess-fistula complex healing was 18.8 ± 11.0 days. The mean volume of irrigation was 10 804 ± 1669 mL/24 h. The mean irrigation time was 16.5 ± 9.2 days, and a median of two irrigation tubes (range 2-5) were used. No complications occurred either during or after the procedure. During the follow-up of 23.1 ± 18.1 months, no recurrence or adverse events were noted. CONCLUSIONS: MCI and endoscopic debridement may be a feasible, safe, and effective alternative treatment for refractory abscess-fistula complexes. Large prospective studies are needed to validate our results.

Regulating Surface Defects to Achieve More Positive Light Soaking Effect in Perovskite Solar Cells.

The dynamic defect tolerance under light soaking is a crucial aspect of halide perovskites. However, the underlying physics of light soaking remains elusive and is subject to debate, exhibiting both positive and negative effects. In this investigation, we demonstrated that surface defects in perovskite films significantly impact the performance and stability of perovskite solar cells, closely correlated with light soaking behaviors. Removing the top surface layer through adhesive tape, the surface defect density noticeably decreases, leading to enhanced photoluminescence (PL) efficiency, prolonged carrier lifetime, and higher conductivity. Consequently, the power conversion efficiency (PCE) of solar cells improves from 17.70% to 20.5%. Furthermore, we confirmed a positive correlation between surface defects and the light soaking effect. Perovskite films with low surface defects surprisingly exhibit a 3-fold increase in PL intensity and an 85% increase in carrier lifetime under 500 s of continuous illumination at an intensity of 100 mW/cm2. Beyond the conventional strategy of suppressing defect trapping, we propose increasing the capability of dynamic defect tolerance as an effective strategy to enhance the optoelectronic properties and performance of perovskite solar cells.

Environmental Management of Equine Asthma.

Environmental practices related to the inhalation of airborne dust have been identified as the main cause of equine asthma (EA) and reasonably, they are truly relevant in its treatment and control, especially for horses with its severe form. Vast research regarding environmental recommendations has been conducted in recent years. However, no recent exhaustive reviews exist that gather all this new evidence. The aim of this review is to report and compare the most pertinent information concerning the environmental management of EA. The main findings highlight the importance of the type of forage used for feeding but also its method of production and possible contamination during manufacture and/or storage. Procedures to reduce this, such as soaking and steaming hay, improve its hygienic quality, although they also decrease forage's nutritional value, making dietetic supplementation necessary. Regarding stabling, despite some conflicting results, avoiding straw as bedding and improving barn ventilation continue to be the common recommendations if turning to pasture is not feasible. Finally, owners' compliance has been identified as the most critical point in correct environmental control. Educating owners about the genuine benefits of these measures should be a cornerstone of EA management.

Optimized protocols for RNA interference in Macrostomum lignano.

Macrostomum lignano, a marine free-living flatworm, has emerged as a potent invertebrate model in developmental biology for studying stem cells, germline, and regeneration processes. In recent years, many tools have been developed to manipulate this worm and to facilitate genetic modification. RNA interference is currently the most accessible and direct technique to investigate gene functions. It is obtained by soaking worms in artificial seawater containing dsRNA targeting the gene of interest. Although easy to perform, the original protocol calls for daily exchange of dsRNA solutions, usually until phenotypes are observed, which is both time- and cost-consuming. In this work, we have evaluated alternative dsRNA delivery techniques, such as electroporation and osmotic shock, to facilitate the experiments with improved time and cost efficiency. During our investigation to optimize RNAi, we demonstrated that, in the absence of diatoms, regular single soaking in artificial seawater containing dsRNA directly produced in bacteria or synthesized in vitro is, in most cases, sufficient to induce a potent gene knockdown for several days with a single soaking step. Therefore, this new and highly simplified method allows a very significant reduction of dsRNA consumption and lab work. In addition, it enables performing experiments on a larger number of worms at minimal cost.

Study of the mechanism underlying the anti-inflammatory effect of Miao medicine comprising raw and processed Radix Wikstroemia indica using the "sweat soaking method".

ETHNOPHARMACOLOGICAL RELEVANCE: To explore the differences in the anti-inflammatory efficacy and mechanisms of the Miao medicine, both raw and after processing, using the "sweat soaking method" of Radix Wikstroemia indica (RWI). AIM OF THE STUDY: The purpose of this study was to explore the differences in the anti-inflammatory efficacy and mechanism of action before and after the processing of the Miao medicine (RWI) using the "sweat soaking method." MATERIALS AND METHODS: Network pharmacology technology was used to construct the "drug-component target-pathway-disease" network, and the main anti-inflammatory pathways of RWI were identified. Rat models of collagen-induced arthritis were established. The changes in body weight, swelling rate of the foot pad and ankle joint, arthritis index, thymus index, spleen index, pathological changes of the ankle joint, and the content of inflammatory cytokines (IL-1ß, IL-2, IL-6, IL-10, TNF-α, and NO) were used as indices to evaluate the effect of RWI on rats with collagen-induced arthritis before and after its processing. Plasma and urine samples were collected from the rats, and the potential biomarkers of, and metabolic pathways underlying the anti-inflammatory effects of RWI before and after processing were identified using 1H-Nuclear magnetic resonance metabolomics combined with a multivariate statistical analysis. RESULTS: Eleven key anti-inflammatory targets of IL6, IL-1ß, TNF, ALB, AKT1, IFNG, INS, STAT3, EGFR, TP53, and SRC were identified by network pharmacology. The PI3K-Akt signaling pathway, steroid hormone biosynthesis, arginine biosynthesis, arginine and proline metabolism, tryptophan metabolism, and other pathways were mainly involved in these effects. Pharmacodynamic studies found that both raw and processed RWI products downregulated inflammatory factors in rats with collagen-induced arthritis and alleviated the pathological changes. A total of 41 potential pathways for the anti-inflammatory effects of raw RWI products and 36 potential pathways for the anti-inflammatory effects of processed RWI products were identified by plasma and urine metabolomics. The common pathways of network pharmacology and metabolomics were steroid hormone biosynthesis, arginine biosynthesis, arginine and proline metabolism, and tryptophan metabolism. CONCLUSIONS: The anti-inflammatory effect of RWI was mainly related to the regulation of steroid hormone biosynthesis, arginine biosynthesis, arginine and proline metabolism, and tryptophan metabolism. Finally, the "sweat soaking method" enhanced the anti-inflammatory effect of RWI.

Microfabrication of Gelatin Methacrylate/Hydroxyapatite Composites by Utilizing Alternate Soaking Process.

To construct a complex three-dimensional (3D) structure mimicking bone microstructure, hydrogel models of polymerized gelatin methacrylate (pGelMA) were fabricated by using stereolithography and modified with hydroxyapatite (HAp) via an alternate soaking process (ASP) using a solution of calcium and phosphate ions. Fabricated pGelMA line models whose widths were designed as 100, 300, and 600 µm were modified with HAp by ASP by changing the immersion time and number of cycles. After ASP, all of the line models with widths of 100, 300, and 600 µm were successfully modified with HAp, and large amounts of HAp were covered with the fabricated models by increasing both the immersion time and the number of cycles in ASP. HAp was observed near the surface of the line model with a width of 600 µm after ASP at an immersion time of 10 s, while the entire model was modified with HAp using ASPs for longer immersion times. The adhesion and spread of mesenchymal stem cells (MSCs) on the pGelMA-HAp discs depended on the ASP conditions. Moreover, the HAp modification of 3D pyramid models without alteration of the microstructure was also conducted. This two-step fabrication method of first fabricating frameworks of hydrogel models by stereolithography and subsequently modifying the fabricated models with HAp will lead to the development of 3D cell culture systems to support bone grafts or to create biological niches, such as artificial bone marrow.

Texture classification and in situ cation measurements by SEM-EDX provide detailed quantitative insights into cell wall cation interaction changes during ageing, soaking, and cooking of red kidney beans.

Hard-to-cook (HTC) is a textural defect that delays the softening of common bean seeds during cooking. While this defect is commonly associated with conventionally stored beans, soaking/cooking of beans in CaCl2 solutions or sodium acetate buffer can also prolong the cooking time of beans due to formation of Ca2+ crosslinked pectin retarding bean softening during cooking. In this study, the role of the cell wall-bound Mg2+/Ca2+ content and the degree of pectin methyl esterification (DM) was quantified, as important factors for bean texture-related changes stipulated in the pectin-cation-phytate hypothesis, the most plausible hypothesis of HTC development. Evaluation of texture changes during cooking of conventionally aged beans (35 °C and 83% RH for up to 20 weeks), beans soaked/cooked in CaCl2 solutions (0.01 to 0.1 M) or soaked in 0.1 M sodium acetate buffer (pH 4.4) revealed large bean-to-bean variations. Therefore a texture-based classification approach was used to better capture the relation between texture characteristics and cell wall polymer, in particular pectin, related changes. While cell wall-bound Ca2+ and pectin DM did not change/were not related to the texture variation during cooking of fresh beans, increased cell wall-bound Ca2+ and decreased pectin DM were associated with prolonged conventional storage of beans and their texture changes during subsequent cooking (due to pectin cross linking, retarding its solubilization during cooking). Exogenously added Ca2+ from pre-treating beans in CaCl2 solutions promoted to a great extent the cell wall-bound Ca2+ during soaking but even more so during cooking, complementing the harder texture associated with these beans during cooking (compared to conventionally stored and fresh beans). Similarly, free Ca2+ endogenously generated by phytase-catalysed phytate hydrolysis (beans treated by acetate buffer) promoted crosslinking of pectin by Ca2+ (cell wall-bound Ca2+), delaying softening of beans during cooking.