Lens Thickness in Infants and Children with Cataracts.

Purpose: The purpose of this study was to determine the association between lens thickness and cataract in participants aged 0 to 5 years. Design: This was a prospective, multicenter, case-control study. Participants: We enrolled 118 participants (171 eyes) aged 0 to 5 years, mean age 14.6 ± 17.0 months, range 0 to 60 months. Methods: Lens thickness was measured on 342 ultrasound biomicroscopy (UBM) images. Main Outcome Measures: Lens thickness; feasibility of lens thickness measurement from UBM images. Results: The mean lens thickness among noncataracts was 3.60 ± 0.17 mm, compared with 3.16 ± 0.61 mm among cataracts (P < 0.0001). Lens thickness <3.5 mm was significantly associated with increased odds of cataract; adjusted odds ratio = 5.99 (95% confidence interval, 2.41-14.88; P < 0.0003) among participants age 0 to 7 months. Lens thickness was significantly associated with cataract laterality among participants age 0 to 7 months (P < 0.0001). Conclusions: Quantitative UBM can be used to evaluate lens thickness in infants and children with congenital cataracts. The lens in congenital cataract eyes was thinner than that of controls among infants. Abnormal lens thickness was significantly associated with cataract. Future longitudinal studies will examine the association between lens thickness and postcataract surgery outcomes. Financial Disclosures: Proprietary or commercial disclosure may be found in the Footnotes and Disclosures at the end of this article.

Endoscopic resection for gastric submucosal tumors: A single-center experience in Japan.

Objectives: Endoscopic resection (ER) for gastric submucosal tumors (SMTs) has gained prominence in recent years, with studies emerging from various countries. However, there is a paucity of reports from Japan. We aimed to elucidate the efficacy and safety of ER for gastric SMT in Japan. Methods: In this retrospective observational study, we investigated the outcomes of consecutive patients who underwent ER for gastric SMT from January 2017 to May 2023. The outcome variables assessed included the complete resection rate, procedure time, closure-related outcomes, and the incidence of adverse events. Results: A total of 13 patients were included in the analysis. The median procedure time was 163 (55-283) min. Complete full-thickness resection was performed in seven cases, while in four cases, the serosa remained, and in two cases, the outer layer of the muscularis propria remained. In two cases where the SMT was located on the anterior side, conversion to laparoscopic surgery became necessary, resulting in a procedural success rate of 84.6% (11/13). Excluding these two cases, endoscopic closure of the defect was successfully accomplished in the remaining 11 cases. R0 resection was achieved in 12 out of 13 cases (92.3%). Although one patient had peritonitis, which was successfully treated conservatively, no other treatment-related adverse events were encountered. Conclusions: Although ER for SMT on the anterior side may be challenging, our experience revealed that ER is a safe and efficacious approach for gastric SMT.

Insight into the unique role of silver single-atom in atomic-thickness ZnIn2S4/g-C3N4 Van der Waals heterojunction for photocatalytic hydrogen evolution.

The construction of ultra-close 2D atomic-thickness Van der Waals heterojunctions with high-speed charge transfer still faces challenges. Here, we synthesized single-layer ZnIn2S4 and g-C3N4, and introduced silver single atoms to regulate Van der Waals heterojunctions at the atomic level to optimize charge transfer and catalytic activity. At the atomic scale, the impact of detailed structural differences between the two characteristic surfaces of ZnIn2S4 ([Zn-S4] and [In-S4]) on catalytic performance has been first proposed. Experiments combined with the DFT study demonstrate that single atom Ag not only acts as a charge transfer bridge but also regulates the energy band and intrinsic catalytic activity. Benefiting from the enhanced electron delocalization, the synthesized catalyst ZIS/Ag@CN exhibits excellent photocatalytic performance, with a hydrogen production rate of 5.50 mmol·g-1·h-1, which is much higher than the reported Ag-based single-atom catalysts so far. This work provides a new understanding of atomic-level heterojunction interface regulation and modification.

Carotid plaque thickness predicts cardiovascular events and death in patients with chronic kidney disease.

BACKGROUND: Classical risk scoring systems underestimate the risk of cardiovascular disease in chronic kidney disease (CKD). Coronary artery calcium score (CACS) has improved prediction of cardiovascular events in patients with CKD. The maximal carotid plaque thickness (cPTmax) measured in ultrasound scans of the carotid arteries has demonstrated similar predictive value as CACS in the general population. This is the first study to investigate whether cPTmax can predict cardiovascular events in CKD and to compare the predictive value of cPTmax and CACS in CKD. METHOD: Two hundred patients with CKD stage 3 from the Copenhagen CKD Cohort underwent ultrasound scanning of the carotid arteries. The assessment consisted of locating plaque and measuring the thickest part of the plaque, cPTmax. Based on the distribution of cPTmax, the participants were divided into 3 groups: No plaques, cPTmax 1.0-1.9 mm and cPTmax > 1.9 mm (median cPTmax = 1.9 mm among patients with plaques). To measure CACS, 175 of the patients underwent a non-contrast CT scan of the coronary arteries. The follow-up time spanned between the ultrasound scan and a predefined end-date or the time of first event, defined as a composite of major cardiovascular events or death of any cause (MACE). RESULTS: The median follow-up time was 5.4 years during which 45 patients (22.5%) developed MACE. In a Cox-regression adjusted for classical cardiovascular risk factors, patients with cPTmax > 1.9 mm had a significantly increased hazard ratio of MACE (HR 3.2, CI: 1.1-9.3), p = 0.031) compared to patients without plaques. C-statistics was used to evaluate models for predicting MACE. The improvement in C-statistics was similar for the two models including classical cardiovascular risk factors plus cPTmax (0.247, CI: 0.181-0.312) and CACS (0.243, CI: 0.172-0.315), respectively, when compared to a model only controlled for time since baseline (a Cox model with no covariates). CONCLUSION: Our results indicate that cPTmax may be useful for predicting MACE in CKD. cPTmax and CACS showed similar ability to predict MACE.

Incidence of Carotid Wall Irregularities in Acute Ischemic Stroke Patients: A Descriptive Analysis.

Background Carotid wall abnormalities are significant predictors of cardiovascular events, including ischemic stroke. Identifying the clinical and biochemical risk factors associated with these abnormalities can aid in early intervention and prevention strategies. This study aimed to assess the association between lipid profiles, age, gender, smoking habits, hypertension, and carotid wall abnormalities in patients. Methodology A cross-sectional study was conducted on 60 patients, evaluating their clinical and biochemical profiles, including lipid levels, age, gender, smoking status, and the presence of hypertension. Carotid intima-media thickness was measured using ultrasound to identify carotid wall abnormalities. The data were analyzed to determine the associations between these factors and the presence of carotid wall abnormalities. Results Carotid wall abnormalities were present in 78.3% (n = 47) of the patients. Individuals with carotid wall irregularities exhibited markedly elevated total cholesterol concentrations (175 ± 35.0 mg/dl) compared to those without abnormalities (150 ± 31.0 mg/dl) (p = 0.007). The mean age was 64.0 ± 8.0 years in the abnormality group versus 56.0 ± 5.0 years in the non-abnormality group (p = 0.008). Males constituted 80.0% of the abnormality group, compared to 46.7% in the non-abnormality group (p = 0.03). This higher prevalence of carotid wall abnormalities in males could be related to gender-specific risk factors, such as higher rates of smoking and hypertension, both of which were more common in the abnormality group and are known contributors to vascular changes. Smoking (70% vs. 20%, p = 0.0005) and hypertension (85% vs. 40%, p = 0.0005) were significantly more prevalent in individuals with carotid wall abnormalities. Conclusions This study highlights the significant association between elevated total cholesterol, older age, male gender, smoking, and hypertension with carotid wall abnormalities. These findings emphasize the importance of early detection and management of these risk factors to prevent the progression of carotid atherosclerosis and reduce the risk of ischemic stroke and other cardiovascular events.

'Bucket Handle' bipedicled flap for reconstruction of large scalp defects.

Although advances in free flap surgery have allowed the reconstruction of a wide range of complex scalp defects, simpler local options continue to play a role. We describe how bipedicled or 'bucket handle' scalp flap with skin grafting of the donor site can be used to resurface large scalp defects of up to 15 cm x 20 cm. This retrospective case series of 11 patients describes flap outcomes, post-operative complications, pathology and patient-related outcomes collected via a questionnaire. Defect sizes ranged from 56 cm2 to 220 cm2. All 11 flaps survived with no readmissions or return to theatre. There were two minor post-operative infections. Pathologies requiring reconstruction were invasive squamous cell carcinoma involving the bone (45%), cranial bone necrosis after a cerebrovascular event (27%), trauma (9%) or cerebral malignancy (9%). Four patients (36%) underwent simultaneous cranial reconstruction with a cranioplasty plate. On an average, the patients who did not need to remain in the hospital for other reasons were discharged after two days. All patients reported subjective improvements in function post-operatively and that they were satisfied with the procedure. This study suggests that large bipedicled scalp flaps with skin graft to the donor site are reliable, with positive patient-related outcomes and few post-operative complications. This technique is well suited for reconstructing long elliptical scalp defects created after the insertion of a cranioplasty plate. This procedure provides a robust alternative to patients who are unsuitable for free tissue transfer and those who may benefit from the short operative time and quick recovery time associated with a local flap.

A Comparative Review of Meshed Versus Unmeshed Grafts in Split-Thickness Skin Grafting: Clinical Implications and Outcomes.

Split-thickness skin grafting (STSG) is a cornerstone technique in reconstructive surgery, offering solutions for covering wounds, burns, and other skin defects. This review compares meshed versus unmeshed STSG, focusing on their clinical implications and outcomes. Meshed grafts, created by perforating the skin graft to form a mesh-like pattern, are frequently used for larger or irregularly shaped areas due to their ability to expand and conform to the underlying tissue. In contrast, unmeshed grafts are applied as whole sheets, making them suitable for smaller or cosmetically sensitive regions where appearance is paramount. This review examines various aspects of these graft types, including graft survival rates, aesthetic and functional results, healing times, and complications such as infection and graft contraction. This study aims to identify the relative advantages and drawbacks of meshed versus unmeshed grafts by analyzing data from clinical trials, meta-analyses, and systematic reviews. The findings highlight that while meshed grafts offer improved coverage and reduced risk of graft failure, unmeshed grafts are preferred for their superior cosmetic outcomes. Understanding these differences is crucial for optimizing surgical strategies and improving patient outcomes. The review also addresses patient-specific factors and recommends selecting the appropriate graft type based on clinical scenarios.

Association of Various Optical Coherence Tomographic Patterns of Diabetic Macular Edema With Central Subfield Thickness and Visual Acuity: A Cross-Sectional Observational Study.

Introduction Diabetic macular edema (DME) is the most common and vision-threatening complication in diabetic patients with diabetic retinopathy (DR), especially in those with Type 2 diabetes mellitus. Optical coherence tomography (OCT) is a reliable tool most commonly used for assessing macular morphology and provides quantitative information on the macula. OCT also examines the outer retinal layers, which can predict visual outcomes. Thus, our study aims to identify the association of various OCT-detected DME morphological patterns with central subfield thickness (CST) and visual acuity. Materials and methods This is a cross-sectional observational study of 50 patients with DME detected on OCT who visited the Ophthalmology Department of Saveetha Medical College and Hospitals for a period of six months, from November 2023 to April 2024. A complete ocular examination, including best corrected visual acuity, scored with the logMAR scale, anterior segment examination, and fundus biomicroscopy using 90D and 78D lenses, was performed. Early Treatment of Diabetic Retinopathy Study (ETDRS) grading of DR into mild to very severe non-proliferative diabetic retinopathy (NPDR) and proliferative diabetic retinopathy (PDR) was noted. Spectral-domain OCT was used to diagnose DME. The CST was measured, and DME was classified into four patterns: sponge-like retinal swelling (SLRS), cystoid macular edema (CME), subretinal fluid (SRF), and posterior hyaloid traction (PHT). Results In the present study, males represented 60%, and females represented 40%. The mean age of the patients was 58.07 ± 6.80 years, with a mean duration of diabetes of 11.91 ± 5.14 years. Of the 50 patients with 100 eyes, only 60 eyes showed DME on OCT. CME was the most common morphological pattern (37%), while the least common pattern was PHT (10%). No significant association was found between a specific morphological pattern and control of diabetes. The most common pattern observed was SLRS in moderate NPDR, CME in severe NPDR, SRF in very severe NPDR, and PHT in PDR. Very severe NPDR patients showed all patterns of DME, and the PHT pattern was observed only in very severe NPDR and PDR. The highest mean CST was observed in the very severe NPDR stage, and the least was in the moderate NPDR stage. The mean CST was highest in SRF patterns and lowest in SLRS patterns. The best mean visual acuity was observed in the SLRS pattern, while the worst mean visual acuity was observed in the SRF pattern, followed by the PHT pattern. Conclusion Our study highlights the importance of OCT in patients with diabetes, as OCT patterns of DME are critical for predicting visual outcomes in DR. Severe grades of DR are usually associated with SRF and PHT patterns. Since patients with SRF and PHT patterns have the worst visual outcomes, these patients, upon identification, need to be counseled about their poor visual prognosis. Those with less severe DR should be closely monitored and advised on effective diabetes control to prevent progression and protect their vision.

Widefield swept source optical coherence tomography for the monitoring of choroidal infiltrates.

Choroidal Infiltrates (Cis) detection is traditionally done using invasive imaging. We herein report the usage of topographic choroidal thickness maps (ChT maps) and en face swept-source Optical Coherence Tomography (OCT) as a rapid and non-invasive technique to monitor Cis in a patient with Chronic Lymphocytic Leukemia.

Corneal and intraocular pressure changes associated to the circadian rhythms: a narrative review.

AIM: To synthesize the current body of research regarding the diurnal variations in intraocular pressure (IOP) and corneal biomechanical and morphological parameters, highlighting their significance in various eye conditions. METHODS: A comprehensive review of studies on the diurnal variations of IOP and corneal parameters was conducted. Tonometry findings from various studies were assessed, including the Goldmann applanation tonometry (GAT) and non-contact tonometers. Data on the variations in central corneal thickness (CCT), corneal curvature, and corneal biomechanics measured by the Ocular Response Analyzer system across different population groups was extracted and analyzed. RESULTS: In both healthy subjects and those with Fuchs dystrophy, IOP and CCT demonstrate marked diurnal declines. GAT remains the gold standard for tonometry, with the highest reliability. However, its measurements are influenced by CCT. Keratoconus patients and those with pseudoexfoliation showed significant diurnal variations in IOP. The biomechanical parameters, especially corneal hysteresis (CH) and the corneal resistance factor (CRF), largely remain stable throughout the day for most of eye conditions, with some exceptions. Notably, the corneal morphology diurnal variation, particularly curvature, yielded mixed conclusions across studies. CONCLUSION: Circadian rhythms significantly influence various corneal parameters, most notably IOP and CCT. Further studies should emphasize standardized approaches larger sample sizes, and delve deeper into less-explored areas, such as the effects of orthokeratology lenses on diurnal biomechanical shifts.

Automatic fovea detection and choroid segmentation for choroidal thickness assessment in optical coherence tomography.

AIM: To develop an automated model for subfoveal choroidal thickness (SFCT) detection in optical coherence tomography (OCT) images, addressing manual fovea location and choroidal contour challenges. METHODS: Two procedures were proposed: defining the fovea and segmenting the choroid. Fovea localization from B-scan OCT image sequence with three-dimensional reconstruction (LocBscan-3D) predicted fovea location using central foveal depression features, and fovea localization from two-dimensional en-face OCT (LocEN-2D) used a mask region-based convolutional neural network (Mask R-CNN) model for optic disc detection, and determined the fovea location based on optic disc relative position. Choroid segmentation also employed Mask R-CNN. RESULTS: For 53 eyes in 28 healthy subjects, LocBscan-3D's mean difference between manual and predicted fovea locations was 170.0 µm, LocEN-2D yielded 675.9 µm. LocEN-2D performed better in non-high myopia group (P=0.02). SFCT measurements from Mask R-CNN aligned with manual values. CONCLUSION: Our models accurately predict SFCT in OCT images. LocBscan-3D excels in precise fovea localization even with high myopia. LocEN-2D shows high detection rates but lower accuracy especially in the high myopia group. Combining both models offers a robust SFCT assessment approach, promising efficiency and accuracy for large-scale studies and clinical use.

The triple radiologic asthma phenotype is associated with worse disease control.

Background: Efforts have been made to combine radiographic biomarkers such as bronchiectasis or bronchial wall thickness (BWT) for the purpose of identifying asthma subphenotypes and their clinical implications. Objective: Our aim was to assess whether a composite triple radiologic phenotype measured by high-resolution computed tomography comprising BWT, mucus plug score (MPS), and mediastinal lymph node (MLN) size might provide a better insight into subphenotypes in persistent asthma. Methods: A total of 112 patients with moderate-to-severe asthma were included in this retrospective observational study. A binary method was used to classify patients according to median values for the following: a pooled mediastinal lymph node size of 3.6 mm or more; a BWT as a pooled wall area of at least 50% of the total airway area; and a mucus plug score of 1 or higher, with a mucus plug considered positive if complete bronchial obstruction was imaged more than 2 cm from a pleural surface. Results: Patients with the triple imaging phenotype exhibited significantly worse Asthma Control Questionnaire scores, with their scores exceeding minimal clinical important difference, a higher prevalence of concomitant chronic rhinosinusitis with nasal polyps, and a greater total IgE level. Conclusion: We have demonstrated an association between poorer symptom control and the triple radiologic asthma phenotype.

Optical coherence tomography and contrast sensitivity in early diabetic retinopathy.

PURPOSE: This study used contrast sensitivity (CS) and optical coherence tomography (OCT) to assess the functional and structural alterations of the macula and the optic nerve head (ONH) in diabetic patients with no retinopathy and those with mild nonproliferative diabetic retinopathy (NPDR). MATERIALS AND METHODS: In this study, 40 eyes of 20 diabetic patients with no diabetic retinopathy (DR), 40 eyes of 20 diabetic patients with mild NPDR, and 36 eyes of 18 healthy individuals were examined. Best-corrected visual acuity (VA) and CS were performed using early treatment DR study charts and the Pelli-Robson chart, respectively. The macula and ONH were evaluated using OCT, which provided data on the entire retina, inner retinal layer, outer retinal layer, retinal nerve fiber layer (RNFL), and the macula zone-ellipsoid zone-retinal pigment epithelium layer. RESULTS: VA and CS were significantly different between the three groups (P < 0.001). The entire thickness of the retina and the internal thickness of the retina in the 3-6 mm subfields of the macular region, as well as the thickness of the ganglion cell layer + inner plexiform layer (GCL + IPL) and GCL + IPL + RNFLs, differed significantly across the groups (P < 0.013). CONCLUSION: In diabetic subjects with no retinopathy, the reduced thickness of the GCL + IPLs is possibly indicative of early neurodegenerative changes in the inner retina. Furthermore, in the diabetic groups, a decrease in CS was observed compared to the control group.

On the Development of Smart Framework for Printability Maps in Additive Manufacturing of AISI 316L Stainless Steel.

In this work, we propose a methodology to develop printability maps for the laser powder bed fusion of AISI 316L stainless steel. Regions in the process space associated with different defect types, including lack of fusion, balling, and keyhole formation, have been considered as a melt pool geometry function, determined using a finite element method model containing temperature-dependent thermophysical properties. Experiments were performed to validate the printability maps, showing a reliable correlation between experiments and simulations. The validated simulation model was then applied to collect the data by varying laser scanning speed, laser power, powder layer thickness, and powder bed preheating temperature. Following this, the collected data were used to train and test the adaptive neuro-fuzzy interference system (ANFIS)-based machine learning model. The validated ANFIS model was used to develop printability maps by correlating the melt pool characteristics to the defect types. The smart printability maps produced by the proposed methodology can be used to identify the processing window to attain defects-free components, thus attaining dense parts.

Neuroanatomical profiles of cognitive phenotypes in patients with primary brain tumors.

Background: Patients with brain tumors demonstrate heterogeneous patterns of cognitive impairment, likely related to multifactorial etiologies and variable tumor-specific factors. Cognitive phenotyping offers a patient-centered approach to parsing heterogeneity by classifying individuals based on patterns of impairment. The aim of this study was to investigate the neuroanatomical patterns associated with each phenotype to gain a better understanding of the mechanisms underlying impairments. Methods: Patients with primary brain tumors were recruited for a prospective, observational study. Patients were cognitively phenotyped using latent profile analysis in a prior study, revealing 3 distinct groups: generalized, isolated verbal memory, and minimal impairment. Whole brain cortical thickness (CT), fractional anisotropy, and mean diffusivity (MD) were compared across phenotypes, and associations between imaging metrics and cognitive scores were explored. Results: Neurocognitive, structural MRI, and diffusion MRI data were available for 82 participants at baseline. Compared to the minimal impairment group, the generalized impairment group showed a widespread, bi-hemispheric pattern of decreased CT (P-value range: .004-.049), while the verbal memory impairment group showed decreased CT (P-value range: .006-.049) and increased MD (P-value range: .015-.045) bilaterally in the temporal lobes. In the verbal memory impairment group only, increased parahippocampal MD was associated with lower verbal memory scores (P-values < .01). Conclusions: Cognitive phenotypes in patients with brain tumors showed unique patterns of brain pathology, suggesting different underlying mechanisms of their impairment profiles. These distinct patterns highlight the biological relevance of our phenotyping approach and help to identify areas of structural and microstructural vulnerability that could inform treatment decisions.

Carotid Intima-Media Thickness in Indian Patients With Non-alcoholic Fatty Liver Disease: A Systematic Review and a Meta-Analysis.

There is a significant association of non-alcoholic fatty liver disease (NAFLD) with cardiovascular disease (CVD). Most CVDs begin with atherosclerosis in the arteries, which can be reliably measured as the carotid intima-media thickness (CIMT) by ultrasound. Given that ethnic and regional differences have an impact on NAFLD, we aimed to evaluate the association of NAFLD patients from India with subclinical atherosclerosis, measured as CIMT. A thorough literature search was performed on four electronic databases using combinations of several keywords. The relevant data were pooled in a random or fixed-effect model, based on heterogeneity, to calculate the pooled standardised mean difference (SMD), or odds ratio (OR) with 95% confidence interval (CI). The final analysis included a total of 15 studies with 1196 NAFLD and 1482 control subjects. NAFLD patients had a 21.3% higher mean CIMT than the controls. The pooled SMD was 1.001 (95% CI: 0.627-1.375, p < 0.001). Three studies that balanced cardiometabolic risk factors found a similar association (p = 0.037). Furthermore, NAFLD was significantly associated with the presence of high (>0.8 mm) CIMT (pooled OR = 5.4, 95% CI: 2.0-14 .9) and carotid plaques (pooled OR = 10.24, 95% CI: 5.74-18.26). The mean CIMT was also higher in diabetic NAFLD than in the diabetic control (pooled SMD = 1.07, 95% CI = 0.818-1.324, p < 0.001). There is a significant positive association between the marker of subclinical atherosclerosis and NAFLD in India. This might give more light on screening and follow-up plans for such patients.

Superior Measurement Accuracy of Digital Thickness Gauge Versus Digital Vernier Caliper in Determining Venous Tissue Thickness.

Background In determining mechanical characteristics, the accuracy of the thickness of the specimens can influence the biomechanical behavior, especially in the case of human tissues, where there is an important variability. This study aims to compare the accuracy of two routine measuring instruments, i.e., the digital vernier caliper and the digital thickness gauge, when measuring the thickness of venous specimens multiple times. Methodology In this study, we used 12 tubular vena cava specimens obtained from common breed pigs aged 18-24 weeks at the time of sacrifice from a local slaughterhouse. The measurements were performed using a digital vernier caliper (Multicomp PRO MP012475) for the first four protocols and a digital thickness gauge (Mitutoyo 547-500S) for the fifth protocol. In the first protocol, three measurements were taken on the same side, and their average was recorded as the sample thickness. The second protocol involved taking measurements on two opposite sides, and the average of these measurements was recorded as the sample thickness. In the third protocol, the thickness of each side was measured at its midpoint, and the average of the four measurements was recorded as the sample thickness. In the last protocol using a digital vernier caliper, the thickness of the vernier specimens was calculated as the average of the measurements taken at each corner of the square sample. Finally, for the fifth protocol, three consecutive measurements were taken using the digital thickness gauge, and their average was recorded as the final thickness of the sample. Results In the first protocol, we observed lower values during the first measurement in comparison to the second (0.409 ± 0.063 vs. 0.536 ± 0.064, p < 0.0001) and the third (0.409 ± 0.063 vs. 0.528 ± 0.055, p = 0.0001). Moreover, with the second protocol, we observed lower values during the first two measurements in comparison to the third measurement (p = 0.0279 and p = 0.0054). Regarding protocols three and four, we recorded higher values for the second and third measurements than the first one, with higher values for the third measurement than the second one. In the fifth protocol, there were no significant statistical differences between the three consecutive measurements (p = 0.953, p = 0.742, and p = 0.897). Further, we examined the variations in sample thickness determined using each of the protocols proposed for the digital vernier caliper, as well as the values obtained with the digital thickness gauge protocol. As a result, during the first and second measurements, we observed lower thickness values for the venous wall samples using the first four protocols compared to the fifth protocol (for all p < 0.05). However, no differences were noted between the five protocols during the third measurement. Conclusions The digital thickness gauge Mitutoyo 547-500S provided superior accuracy with no difference between three successive measurements of venous wall thickness, regardless of the examiner's experience. Accurately determining the thickness of venous specimens is crucial for calculating the tissue's biomechanical properties.

Association of rurality and health professional shortages with the clinicopathologic characteristics of melanoma in North Carolina.

PURPOSE: To assess rural-urban and health professional shortage area (HPSA)-related influences on the characteristics of melanoma in North Carolina. METHODS: We conducted a single-center retrospective cohort study of patients living in North Carolina with an available pathology report for invasive cutaneous melanoma seen in the Duke University Health System from 01/01/2014 to 12/31/2020. Multivariable logistic regression models were employed to compare patient and tumor characteristics between rural versus urban county residence as well between melanoma thicknesses dichotomized into thin (≤1.0 mm) and thicker (>1.0 mm) tumors. FINDINGS: The cohort included 807 patients, and rural patients accounted for 177 (21.9%) of invasive cutaneous melanomas. Rural patients had significantly higher odds of having thicker tumors than urban patients (odds ratio [OR] = 1.78, 95% confidence interval [CI]: 1.17-2.71; P = .008). Rural patients were significantly more likely to be female (OR = 1.59, 95% CI: 1.10-2.28; P = .013) and located in a population-based (OR = 2.66, 95% CI: 1.84-3.84; P<.001) or geographic-based (OR = 8.21, 95% CI: 3.33-20.22; P<.001) HPSA. Living in a medium- or high-shortage population-based HPSA was associated with higher odds of thicker tumors (OR = 2.65, 95% CI: 1.85-3.80; P<.001). CONCLUSIONS: Patients living in rural North Carolina counties were more likely than those in urban counties to be diagnosed with melanomas >1.0 mm in thickness, a clinically significant difference with important prognostic implications. Interventions at the county- and state-level to address this disparity may include improving access to skin cancer screening and teledermatology programs, increasing partnerships with primary care providers, and targeting interventions to counties with health professional shortages.