Synergistic efficacy of ZnO quantum dots, Ag NPs, and nitazoxanide composite against multidrug-resistant human pathogens as new trend of revolutionizing antimicrobial treatment.

Antibiotic resistance is currently becoming a more serious threat to global health, especially in severe nosocomial infections treatment by multidrug-resistant bacteria. This research provides a new way of synergizing green-synthesis for zinc oxide quantum dots (ZnO-QDs with hexagonal crystals) that are 7 nm in diameter and zero-valent Ag cubic crystals that are 67 nm in size embedded with nitazoxanide substrate (NAZ). Instrumental characterization like SEM, TEM, EDAX, and FT-IR and comprehensive antimicrobial studies were conducted to study the incorporation behavior of composites based on Ag NPs/ZnO QDs/NAZ. This combination has not been hitherto addressed anywhere else in the published literature, as well as commercial viability. In this context, we have precisely tuned nanoparticle to nitazoxanide ratio for designing the formulation demonstrating potent activity against MDR infections. By employing nitazoxanide as a scaffold and careful decoration thereof antimicrobial potency has been unlocked overriding conventional therapies. In addition, Ag NPs/ZnO-QDs/nitazoxanide (G6) formula exhibited a therapeutic efficacy span of 96.15 ± 1.68% to 99.57 ± 0.20% against MDR human infections post 48 h incubation; a breakthrough in therapeutic efficacy levels has been achieved by our method. Accordingly, ZnO QDs/Ag NPs/NAZ composite offered potential multidrug resistant human pathogens as a new trend of revolutionizing antimicrobial treatment.

Exploring Functional Polymers in the Synthesis of Luminescent ZnO Quantum Dots for the Detection of Cr6+, Fe2+, and Cu2.

The main aim of this work is to demonstrate that well-defined methacrylate-based copolymers with oligoethylene glycol side chains and functional groups such as thiol and glycidyl, obtained by photo-initiated reversible addition-fragmentation chain transfer (RAFT) in ethanol, are highly suitable as templates in the synthesis and protection of ZnO quantum dots (ZnO QDs) with remarkable photoluminescent properties. While the affinity of thiol groups to metallic surfaces is well established, their interaction with metal oxides has received less scrutiny. Furthermore, under basic conditions, glycidyl groups could react with hydroxyl groups on the surface of ZnO, representing another strategy for hybrid synthesis. The size and crystalline morphology of the resulting hybrids were assessed using DLS, TEM, and XRD, indicating that both polymers, even with a low proportion of functional groups (5% mol) are appropriate as templates and ligands for ZnO QDs synthesis. Notably, thiol-containing polymers yield hybrids with ZnO featuring excellent quantum yield (up to 52%), while polymers with glycidyl groups require combination with the organosilane aminopropyl triethoxysilane (APTES) to achieve optimal results. In both cases, these hybrids exhibited robust stability in both ethanol and aqueous environments. Beyond fundamental research, due to the remarkable photoluminescent properties and affordability, these hybrid ZnO QDs are expected to have potential applications in biotechnology and green science; in particular, in this study, we examined their use in the detection of environmental contaminants like Fe2+, Cr6+, and Cu2+. Specifically, the limit of detection achieved at 1.13 µM for the highly toxic Cr6+ underscores the significant sensing capabilities of the hybrids.

A solid-phase fluorescence sensor for measuring chemical species in water.

In this study, the first of its kind, a solid-phase fluorescence sensing platform was developed to quantify contaminants in water. ZnO quantum dots (QDs) were combined with molecularly imprinted polymers (MIPs) to form fluorescence sensing materials. Solid sensing layers were formed via a straightforward spin-coating method, which demonstrated a strong attachment to the sensor substrate while maintaining the integrity of the sensing materials. The developed sensing platform comprised a portable fluorescence detector to measure fluorescence intensity, instead of traditional fluorescence spectroscopy. The solid sensing platform was first tested with 2,4-dichlorophenoxyacetic acid (2,4-D), demonstrating high sensitivity (0.0233) and a very strong correlation (0.98) between the target molecule concentration and sensor signal. Further, the sensing platform was successfully adapted to measure a substance with a different molecular mass and chemical structure, the algae toxin microcystin-LR (MCLR); this demonstrated the sensor's versatility in quantifying target molecules. Tap water samples spiked with MCLR were also used to test the sensor's practical application. Finally, the working mechanism of the sensing platform was established, and the key information for using the sensor to measure various contaminants was determined. With its high performance, broad applicability, and ease of use, the developed platform provides a suitable basis for lab-on-chip image-based sensing devices for environmental monitoring.

A selective analysis of sulfamethoxazole - Trimethoprim in tablet formulations using graphene oxide-zinc oxide quantum dots based nanocomposite modified glassy carbon electrode.

In this study, simultaneous analysis on electrochemical detection of SMX and TMP in tablet formulation has been made using graphene oxide (GO) and ZnO QDs (GO-ZnO QDs) based nanocomposite modified glassy carbon electrode (GCE). The functional group presence was observed using FTIR study. The electrochemical characterization for GO, ZnO QDs and GO-ZnO QDs was studied using cyclic voltammetry using [Fe(CN)6]3- medium. In order to estimate the electrochemical redox behavior of SMX and TMP from tablet, the developed electrodes GO/GCE, ZnO QDs/GCE and GO-ZnO QDs/GCE are initially tested for electrochemical activity towards the SMX tablet in BR pH 7 medium. Later their electrochemical sensing has been monitored using square wave voltammetry (SWV). On observing the characteristic behavior of developed electrodes, GO/GCE exhibited detection potential of +0.48 V for SMX and +1.37 V for TMP whereas, ZnO QDs/GCE with +0.78V for SMX and for TMP 1.01 V respectively. Similarly, for GO-ZnO QDs/GCE, its 0.45 V for SMX and 1.11 V for TMP are observed using cyclic voltammetry. The obtained potential results on detecting SMX and TMP are in good agreement with previous results. Under optimized conditions, the response has been monitored with linear concentration range 50 µg/L to 300 µg/L for GO/GCE, ZnO QDs/GCE and GO-ZnO QDs/GCE in SMX tablet formulations. Their detection limits for the individual detection using GO-ZnO/GCE for SMX and TMP are found to be 0.252 ng/L and 19.10 µg/L and for GO/GCE it was 0.252 pg/L and 2.059 ng/L respectively. It was observed that ZnO QDs/GCE could not provide the electrochemical sensing towards SMX and TMP which may be due to the ZnO QPs can act as a blocking layer impeding the electron transfer process. Thus, the sensor performance lead to promising biomedical applications in real-time monitoring on evaluating selective analysis with SMX and TMP in tablet formulations.

Carbon coated In2O3 hollow tubes embedded with ultra-low content ZnO quantum dots as catalysts for CO2 hydrogenation to methanol.

CO2 hydrogenation coupled with renewable energy to produce methanol is of great interest. Carbon coated In2O3 hollow tube catalysts embedded with ultra-low content ZnO quantum dots (QDs) were synthesized for CO2 hydrogenation to methanol. ZnO-In2O3-II catalyst had the highest CO2 and H2 adsorption capacity, which demonstrated the highest methanol formation rate. When CO2 conversion was 8.9%, methanol selectivity still exceeded 86% at 3.0 MPa and 320 °C, and STY of methanol reached 0.98 gMeOHh-1gcat-1 at 350 °C. The ZnO/In2O3 QDs heterojunctions were formed at the interface between ZnO and In2O3(222). The ZnO/In2O3 heterojunctions, as a key structure to promote the CO2 hydrogenation to methanol, not only enhanced the interaction between ZnO and In2O3 as well as CO2 adsorption capacity, but also accelerated the electron transfer from In3+ to Zn2+. ZnO QDs boosted the dissociation and activation of H2. The carbon layer coated on In2O3 surface played a role of hydrogen spillover medium, and the dissociated H atoms were transferred to the CO2 adsorption sites on the In2O3 surface through the carbon layer, promoting the reaction of H atoms with CO2 more effectively. In addition, the conductivity of carbon enhanced the electron transfer from In3+ to Zn2+. The combination of the ZnO/In2O3 QDs heterojunctions and carbon layer greatly improved the methanol generation activity.

RAFT Hydroxylated Polymers as Templates and Ligands for the Synthesis of Fluorescent ZnO Quantum Dots.

The remarkable photoluminescent properties, biocompatibility, biodegradability, and antibacterial properties of zinc oxide quantum dots (ZnO QDs) coupled with their low cost and nanoscale size guarantee bio-related and technological applications. However, the effect of the polymeric ligand during synthesis has hardly been investigated compared to other less environmentally friendly QDs. Thus, the objective of this work was to focus on the synthesis of fluorescent hybrid ZnO QDs by the sol-gel method using different polymers with hydroxyl groups as templates and ligands to obtain stable particles in different media. For this purpose, well-defined hydroxylated statistical polymers and block copolymers were synthesized using reversible-addition fragmentation chain transfer (RAFT) polymerization to establish the influence of molecular weight, hydrophobic/hydrophilic balance, and polymer architecture on the colloidal and photophysical properties of the synthesized hybrid ZnO QDs. Dynamic light scattering (DLS), TEM, and X-ray diffraction measurements indicated the formation of stable nanoparticles of a few nanometers. A remarkable enhancement in terms of fluorescence was observed when ZnO QDs were synthesized in the presence of the hydroxylated homopolymers and even more so with block copolymers architecture. Organosilanes combined with the hydroxylated polymers were used to improve the colloidal stability of ZnO QDs in aqueous media. These samples exhibited uniform and stable enhanced photoluminescence for nearly five months of being investigated. Among other applications, the hybrid ZnO QDs synthesized in this work exhibit high selectivity to detect Cr6+, Fe2+, or Cu2+ in water.

Fluorescence 'turn-on' probe for Al3+ detection in water based on ZnS/ZnO quantum dots with excellent selectivity and stability.

In this work, an efficient and stable fluorescent probe for Al3+was established. The fluorescent probe based on the fluorescence 'turn-on' mode of zinc sulfide crystal composite zinc oxide quantum dots (ZnS/ZnO QDs). The ZnS/ZnO QDs were synthesized via two-step method using L-Cysteine (L-Cys) as a sulfur source and stabilizer. In the synthesis of ZnS/ZnO QDs, the fluorescence of zinc oxide quantum dots (ZnO QDs) decreased and its stability increased in aqueous solution after the addition of L-Cys. In addition, the as-synthesized ZnS/ZnO QDs shows fluorescent enhancement to Al3+. The ZnS/ZnO QDs based fluorescence 'turn-on' probe presented wide linear ranges (1 nM-8µM and 8-100µM). The availability of as-established sensing probe was also estimated by real water sample tests. Furthermore, the fluorescent enhancing mechanism was carried out by recording the fluorescent lifetime of samples, which might be related to the QDs dispersion and charge transfer weaken.

Ratiometric fluorescence sensor based on europium-grafted ZnO quantum dots for visual and colorimetric detection of tetracycline.

An europium functionalized ZnO quantum dots (QDs) ratiometric fluorescent nanoprobe is designed to establish a real time, on-site visual, and highly sensitive probe method for tetracycline (TC). The yellow-emitting ZnO QDs serves as the internal reference, while the Eu3+ chelated on the surface of ZnO QDs is used as the signal reporting unit. This nanoprobe exhibits rapid response, excellent selectivity, and high sensitivity with a detection limit of 4 nM in detecting the levels of TC. In addition, fluorescence of the nanoprobe can change from yellow to red as the concentration of TC increases. Thus, naked eye detection of TC was realized using the test paper processed by nanoprobe, followed by RGB value analysis function on the mobile phone APP.

pH-Responsive and Biodegradable ZnO-Capped Mesoporous Silica Composite Nanoparticles for Drug Delivery.

As a drug delivery system (DDS), traditional mesoporous silica nanoparticles (MSNs) suffer from bioaccumulation in vivo and premature drug release in systemic circulation due to low degradation rate and lack of protective gatekeeper. Herein, we developed a safe and intelligent DDS with characteristics of pH-responsive biodegradation and controlled drug release based on mesoporous silica composite nanoparticles (MSCNs) capped with ZnO quantum dots (ZnO QDs). Acidic degradable MSCNs were successfully synthesized by doping Ca2+ and PO43- into the MSNs' framework. The in vitro doxorubicin hydrochloride (DOX) release was inhibited at neutral pH 7.4 but triggered significantly at pH 5.0 due to the dissociation of ZnO caps. The internalization behavior and cytotoxicity of 4T1 cells indicated MSCNs-ZnO could efficiently deliver DOX into the cells with significant antitumor activity. Such a DDS with pH-responsive biodegradation and controlled drug release has promising potential for cancer therapy.

Gene Expression Profiling of the Liver and Lung in Mice After Exposure to ZnO Quantum Dots.

INTRODUCTION: ZnO quantum dots (QDs) have drawn much attention recently as they are Cd-free, low-cost, and have excellent optical properties. With the expanded production and application of ZnO nanoparticles, concerns about their potential toxicity have also been raised. MATERIALS AND METHODS: We used RNA sequencing (RNA-seq) to analyze the global gene expression of liver and lung tissues after ZnO QDs treatment. Differentially expressed genes (DEGs) were screened, with a fold change >1.5 and padj <0.05. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes enrichment analyses were performed, and padj <0.05 was considered significantly enriched. The RNA-seq results were validated by quantitative real-time polymerase chain reaction (qRT-PCR). RESULTS: A total of 47 and 218 genes were significantly differentially expressed in the liver and lung. Eight GO terms were enriched in the liver and lung, and retinol metabolism and the peroxisome proliferator-activated receptor (PPAR) signaling pathway were shared in different tissues. DISCUSSION: According to DEGs and pathway enrichment analyses, inflammation might be induced in liver and lung tissues after intravenous injection of ZnO QDs. These findings will be helpful for future research and application of ZnO QDs.

Vitamin B6 cofactors guided highly selective fluorescent turn-on sensing of histamine using beta-cyclodextrin stabilized ZnO quantum dots.

Histamine, one of the most important biogenic amines (BAs) is considered as food hazard and therefore various agencies have fixed threshold in different food and beverages. In this manuscript, two novel fluorescent turn-on probes were developed for the instantaneous detection of histamine. The ß-cyclodextrin (ß-CD) capped ZnO quantum dots (QDs) were decorated with the vitamin B6 cofactors like pyridoxal 5'-phosphate (PLP) and pyridoxal (Py) by forming host-guest inclusion complexation between the capped ß-CD and PLP/Py. The cofactors decorated QDs (ZnO@PLP and ZnO@Py) were applied for the sensing of BAs. Addition of histamine to the ZnO@PLP and ZnO@Py solution resulted selective fluorescence enhancement at 473 nm and 460 nm, respectively. Without any interference from the other tested BAs, the fluorescence response of the probes ZnO@PLP and ZnO@Py showed good linearity to histidine concentration from 2.49 to 24.4 µM and 7.44 to 47.6 µM with the detection limit down to 0.59 µM and 0.97 µM, respectively.

A Novel Phototransistor Device with Dual Active Layers Composited of CsPbBr3 and ZnO Quantum Dots.

Taking advantage of a large light absorption coefficient, long charge carrier diffusion length and low-cost solution processing, all-inorganic halides perovskite CsPbBr3 quantum dots (QDs) are combined with a ZnO QD film to construct a high-performance photodetector. In this work, a novel photodetector device based on transistor structure with dual active layers composed of CsPbBr3 and ZnO film is proposed. In this structure, CsPbBr3 film functions as the light-absorbing layer and ZnO film acts as the conducting layer. Owing to the high electron mobility and hole-blocking nature of the ZnO QDs film, the photo-induced electron-hole pairs can be separated efficiently. As a result, the device exhibits high performance with response of 43.5 A/W, high detection up to 5.02 × 1011 Jones and on/off ratio of 5.6 × 104 under 365 nm light illumination. Compared with the ZnO-only phototransistor (the photodetector with the structure of transistor) the performance of the CsPbBr3 phototransistor showed significant improvement, which is superior to the majority of photodetectors prepared by perovskite. This work demonstrates that the ZnO QDs film can be applied in the photodetector device as a functional conducting layer, and we believe that the hybrid CsPbBr3/ZnO phototransistor would promote the development of low-cost and high-performance photodetectors.

Effect of ZnO quantum dots on Escherichia coli global transcription regulator: A molecular investigation.

ZnO quantum dots (QDs) are very well known for their antimicrobial activity against several bacteria, however, we still do not know any protein targets of ZnO QDs. In order to determine possible protein target, interaction of ZnO QDs was studied with CRP (Cyclic AMP Receptor Protein), a global transcription regulator protein. Binding between ZnO QDs and E. coli CRP was mainly studied by isothermal titration calorimetry (ITC), structural changes of protein were monitored by fluorescence and circular dichroism spectroscopy, and in-vitro transcription assay was used to asses CRP activity. Result shows that both electrostatic and hydrophobic interactions are involved in CRP-ZnO binding. Different spectroscopic investigation revealed that ZnO binding to CRP leads to extensive unfolding and destabilization, which ultimately leads to protein aggregation. It was also observed that in presence of ZnO dimerization ability of CRP was sharply reduced. In-vitro transcription assay also shows that CRP activity gets severely compromised on ZnO binding. All our data suggests that ZnO QD binding to CRP and consequent structural and functional changes most probably plays a crucial role in ZnO QD induced antimicrobial action.

ZnO Quantum Dots Modified by pH-Activated Charge-Reversal Polymer for Tumor Targeted Drug Delivery.

In this paper, we reported a pH responsive nano drug delivery system (NDDS) based on ZnO quantum dots (QDs) for controlled release of drugs. Zwitterionic poly(carboxybetaine methacrylate) (PCBMA) and poly(2-(dimethylamino) ethyl methacrylate) (PDMAEMA) were introduced to modify ZnO QDs, which can help enhance water stability, increase blood circulation time, and promote endocytosis. After tuning of PCBMA/PDMAEMA ratios, the ZnO@P(CBMA-co-DMAEMA) nanoplatform shows a sensitive switch from strong protein adsorption resistance (with negatively charged surface) at physiological pH to strong adhesion to tumor cell membranes (with positively charged surface) at the slightly acidic extracellular pH of tumors. Anti-cancer drug, Doxorubicin (DOX), molecules were demonstrated to be successfully loaded to ZnO@P(CBMA-co-DMAEMA) with a relatively large drug loading content (24.6%). In addition, ZnO@P(CBMA-co-DMAEMA) loaded with DOX can achieve lysosomal acid degradation and release of DOX after endocytosis by tumor cells, resulting in synergistic treatment of cancer, which is attributed to a combination of the anticancer effect of Zn2+ and DOX.

Synthesis and characterisation of multifunctional alginate microspheres via the in situ formation of ZnO quantum dots and the graft of 4-(1-pyrenyl) butyric acid to sodium alginate.

Growth factor-loaded fluorescent alginate microspheres, which can realise sustained growth factor release and fluorescence imaging, were synthesised by in situ formation of ZnO quantum dots (QDs) and covalent graft of 4-(1-pyrenyl) butyric acid (PBA). BSA was chosen as a growth factor model protein to study the release kinetic of growth factors from alginate microspheres. The microsphere size and fluorescent properties were also investigated. Investigations of cell culture were used for evaluating biocompatibility of BSA-loaded fluorescent microspheres and fluorescence imaging property of ZnO QDs and PBA-grafted sodium alginate from the microspheres. The results show that they have good fluorescent property either to microspheres or to cells and fluorescent microspheres have good biocompatibility and property in sustained release of growth factors. The obtained microspheres will be expected to realise the imaging of cells and materials and also the release of growth factor in tissue engineering or in cell culture.

Stability and toxicity of ZnO quantum dots: interplay between nanoparticles and bacteria.

The toxicity of quantum dots (QDs) has been commonly attributed to the release of metal ions from the core as well as to the production of reactive oxygen species. However, the information related to the stability of the nanoparticles are relatively scarce although this parameter may strongly influence their toxicity. The stability of aminosilane-capped ZnO QDs, here used as model nanoparticles, was investigated by inductively coupled plasma-optical emission spectrometer (ICP-OES) and whole cell biosensors using a dialysis setup to separate the QDs from the leaked Zn(2+) ions. The integrity of the ZnO QDs appeared strongly affected by their dilution in aqueous medium, whereas the nanoparticles were slightly stabilized by bacteria. Our results demonstrate some inadequacy between the implementation and use of whole cell biosensors, and the monitoring of metal release from QDs.

Graphene activating room-temperature ferromagnetic exchange in cobalt-doped ZnO dilute magnetic semiconductor quantum dots.

Control over the magnetic interactions in dilute magnetic semiconductor quantum dots (DMSQDs) is a key issue to future development of nanometer-sized integrated "spintronic" devices. However, manipulating the magnetic coupling between impurity ions in DMSQDs remains a great challenge because of the intrinsic quantum confinement effects and self-purification of the quantum dots. Here, we propose a hybrid structure to achieve room-temperature ferromagnetic interactions in DMSQDs, via engineering the density and nature of the energy states at the Fermi level. This idea has been applied to Co-doped ZnO DMSQDs where the growth of a reduced graphene oxide shell around the Zn(0.98)Co(0.02)O core turns the magnetic interactions from paramagnetic to ferromagnetic at room temperature, due to the hybridization of 2p(z) orbitals of graphene and 3d obitals of Co(2+)-oxygen-vacancy complexes. This design may open up a kind of possibility for manipulating the magnetism of doped oxide nanostructures.