Evaluation of Two Clinical Stem Fit Philosophies within the Femoral Canal Using a Preoperative Planning Tool: Could a Hybrid Approach Be Best?

BACKGROUND: Total hip arthroplasty (THA) has transformed patient lives, yet evolving expectations and the number of postoperative foot angle changes have underscored the need for precise component positioning. The objective of this study was to use three-dimensional (3D) preoperative planning to evaluate stem alignment and orientation for three THA systems using two different stem fit algorithms. It was hypothesized that the different stem alignments would yield similar changes in stem orientation and placement within the canal for all three systems. METHOD: This study introduced a novel 3D preoperative planning tool, comparing two different surgical stem fit philosophies within the canal: "canal fit" (CF) and "anatomical fit" (AF). We virtually implanted ten subjects with three different THA implant systems using both philosophies, evaluating 60 total fits within the canals. The "canal fit" philosophy aimed to minimize cortical bone removal. In contrast, the "anatomical fit" philosophy prioritized aligning the implanted head with the anatomical head center. RESULTS: Detailed analyses revealed that AF led to fixation occurring mainly on the medial aspect of the stem, while CF exhibited a more even distribution between medial and lateral sides. The AF philosophy achieved significantly closer placement of the implanted head to the anatomical center (2.0 to 2.1 mm) compared to the CF philosophy (3.0 to 6.0 mm) (P < 0.01). The AF resulted in neutral stem orientation (0°) across all stems, whereas the CF exhibited greater malrotation (2.0 to 7.0°) (P < 0.02). The AF required more bone removal (0.13 to 0.46 cm³) than the CF (0.02 to 0.06 cm³) (P < 0.01). CONCLUSION: The findings underscore the importance of 3D planning, emphasizing its potential to improve stem version alignment in THA. The results from this study may advocate 3D preoperative planning with robotic surgery to plan stem placement within the canal while maintaining anatomical femoral head restoration.

Guided versus non-guided chin repositioning: a retrospective study on accuracy.

Genioplasty is a widely used surgical approach to address chin deformities by performing an osteotomy on the inferior border of the mandible to allow for comprehensive repositioning of the chin. This study aimed to compare the accuracy of freehand chin repositioning with a guided technique that employed specialised surgical guides. For this retrospective study, data from 30 adult patients who underwent orthognathic surgery to correct dentofacial deformities were analysed. All patients underwent virtual planning before surgery, with half of them treated using freehand chin repositioning and the other half using the guided technique. The surgical outcomes were measured and compared with the virtual plan to assess the positional and rotational accuracy of the techniques. In terms of translational assessment, noteworthy values that exceeded clinically acceptable limits were observed only in sagittal movement in the freehand group (0.97 mm, interquartile range (IQR) 0.73-2.29 mm). Regarding rotational accuracy, both groups exhibited an IQR that surpassed acceptable limits for pitch (3.26°, IQR 2.06-5.20 for the guided group and 2.57°, IQR 1.63-4.24° for the freehand group). The Mann-Whitney test indicated no statistical differences between the groups in any translational or rotational assessment. In conclusion, although there was no statistical difference, the guided technique proved effective in achieving clinically acceptable accuracy in all positions and almost all rotations, displaying superior results in sagittal positioning compared with the freehand technique. To fully harness the advantages of guides and to guarantee accuracy in all rotations, we recommend further research involving guides made of more rigid materials, and customised implants.

Correcting facial asymmetry through guided plate assisted mandibular angle osteotomy.

Background: Asian women prefer a smooth and narrowed mandibular appearance. The purpose of the retrospective cohort study is to evaluate guide plate-assisted mandibular angle ostectomy (MAO) in improving mandibular symmetry for Asian female patients with mandibular angle hypertrophy (MAH) with normal occlusal relationship. Methods: We retrospectively examined 11 patients with asymmetry MAH with normal occlusal relationship who received MAO at Shanghai Ninth People's Hospital between September, 2020, and January, 2022. Preoperative plans were designed based on CT data and executed using metal guide plate during the operation. Preoperative and one-week postoperative CT scans were used to assess measurements including Height_Go, Divergence_Go, ∠ZyZy-GoGo, and osteotomy volume, to evaluate symmetry. For precision, compare the postoperative CT with the preoperative design, assessing osteotomy distance, angle, and volume error. Patient satisfacation was evaluated with Likert Scale in 6-month follow-up. Secondary lipofilling procedures were given as appropriate. Statistical analysis was performed using paired t-tests in SPSS. Results: The mean age of the 11 patients was 28.5 years (range 23-34 years). 2 of these underwent lipofilling procedures. No complications were observed during the following-up. Postoperative results were not statistically different from the design, demonstrating a precision of within 2 mm. Height_Go disparity within 5 mm get corrected notably, reducing asymmetry from 15.09% preoperatively to 2.74% postoperatively. Patients satisfaction was rated at 4.5 out of 5 in 6 month follow-up. Conclusions: Guide plate-assisted mandibular angle osteotomies achieve effective and precise surgery. This approach demonstrates a safe option for correction for mandibular asymmetry, achieving patient satisfaction.

Application of image recognition-based tracker-less augmented reality navigation system in a series of sawbone trials.

BACKGROUND: This study introduced an Augmented Reality (AR) navigation system to address limitations in conventional high tibial osteotomy (HTO). The objective was to enhance precision and efficiency in HTO procedures, overcoming challenges such as inconsistent postoperative alignment and potential neurovascular damage. METHODS: The AR-MR (Mixed Reality) navigation system, comprising HoloLens, Unity Engine, and Vuforia software, was employed for pre-clinical trials using tibial sawbone models. CT images generated 3D anatomical models, projected via HoloLens, allowing surgeons to interact through intuitive hand gestures. The critical procedure of target tracking, essential for aligning virtual and real objects, was facilitated by Vuforia's feature detection algorithm. RESULTS: In trials, the AR-MR system demonstrated significant reductions in both preoperative planning and intraoperative times compared to conventional navigation and metal 3D-printed surgical guides. The AR system, while exhibiting lower accuracy, exhibited efficiency, making it a promising option for HTO procedures. The preoperative planning time for the AR system was notably shorter (4 min) compared to conventional navigation (30.5 min) and metal guides (75.5 min). Intraoperative time for AR lasted 8.5 min, considerably faster than that of conventional navigation (31.5 min) and metal guides (10.5 min). CONCLUSIONS: The AR navigation system presents a transformative approach to HTO, offering a trade-off between accuracy and efficiency. Ongoing improvements, such as the incorporation of two-stage registration and pointing devices, could further enhance precision. While the system may be less accurate, its efficiency renders it a potential breakthrough in orthopedic surgery, particularly for reducing unnecessary harm and streamlining surgical procedures.

Comparative study on three-dimensional versus two-dimensional imaging using a computer-assisted surgery system for preoperative planning in pediatric middle hepatic tumors.

BACKGROUD: The study objective was to compare three-dimensional and two-dimensional imaging using computer-assisted systems (CASs) in clinical guidance for preoperative surgical planning for middle hepatic tumors in children. METHODS: A retrospective analysis was performed on 23 children who underwent surgery for middle hepatic tumors in our hospital from January 2016 to June 2022. The surgical resection plan was formulated by the operator team using two-dimensional CT images before the operation. Then, the same qualified surgeons conducted an in-depth analysis and formulated the surgical resection scheme for the same pediatric patient using three-dimensional imaging of the middle hepatic tumor. The feasibility of the two schemes was compared and analyzed. RESULT: All the tumors were successfully removed according to the preoperative method developed using three-dimensional imaging. The postoperative short-term follow-up revealed that all patients were doing well. Preoperative plans were revised in 9 cases after evaluating the three-dimensional images due to the disparity between the original plans and the three-dimensional relationship between the tumor and blood vessels, vascular variation, and the volume of remnant liver. CONCLUSIONS: Three-dimensional imaging with a computer-assisted surgery system is superior to two-dimensional imaging in the preoperative planning of pediatric hepatoblastoma.

Applications and accuracy of 3D-printed surgical guides in traumatology and orthopaedic surgery: A systematic review and meta-analysis.

Background: Patient-Specific Surgical Guides (PSSGs) are advocated for reducing radiation exposure, operation time and enhancing precision in surgery. However, existing accuracy assessments are limited to specific surgeries, leaving uncertainties about variations in accuracy across different anatomical sites, three-dimensional (3D) printing technologies and manufacturers (traditional vs. printed at the point of care). This study aimed to evaluate PSSGs accuracy in traumatology and orthopaedic surgery, considering anatomical regions, printing methods and manufacturers. Methods: A systematic review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis guidelines. Studies were eligible if they (1) assessed the accuracy of PSSGs by comparing preoperative planning and postoperative results in at least two different planes (2) used either computer tomography or magnetic resonance imaging (3) covered the field of orthopaedic surgery or traumatology and (4) were available in English or German language. The 'Quality Assessment Tool for Quantitative Studies' was used for methodological quality assessment. Descriptive statistics, including mean, standard deviation, and ranges, are presented. A random effects meta-analysis was performed to determine the pooled mean absolute deviation between preoperative plan and postoperative result for each anatomic region (shoulder, hip, spine, and knee). Results: Of 4212 initially eligible studies, 33 were included in the final analysis (8 for shoulder, 5 for hip, 5 for spine, 14 for knee and 1 for trauma). Pooled mean deviation (95% confidence interval) for total knee arthroplasty (TKA), total shoulder arthroplasty (TSA), total hip arthroplasty (THA) and spine surgery (pedicle screw placement during spondylodesis) were 1.82° (1.48, 2.15), 2.52° (1.9, 3.13), 3.49° (3.04, 3.93) and 2.67° (1.64, 3.69), respectively. Accuracy varied between TKA and THA and between TKA and TSA. Conclusion: Accuracy of PSSGs depends on the type of surgery but averages around 2-3° deviation from the plan. The use of PSSGs might be considered for selected complex cases. Level of Evidence: Level 3 (meta-analysis including Level 3 studies).

Craniomaxillofacial landmarks detection in CT scans with limited labeled data via semi-supervised learning.

Background: Three-dimensional cephalometric analysis is crucial in craniomaxillofacial assessment, with landmarks detection in craniomaxillofacial (CMF) CT scans being a key component. However, creating robust deep learning models for this task typically requires extensive CMF CT datasets annotated by experienced medical professionals, a process that is time-consuming and labor-intensive. Conversely, acquiring large volume of unlabeled CMF CT data is relatively straightforward. Thus, semi-supervised learning (SSL), leveraging limited labeled data supplemented by sufficient unlabeled dataset, could be a viable solution to this challenge. Method: We developed an SSL model, named CephaloMatch, based on a strong-weak perturbation consistency framework. The proposed SSL model incorporates a head position rectification technique through coarse detection to enhance consistency between labeled and unlabeled datasets and a multilayers perturbation method which is employed to expand the perturbation space. The proposed SSL model was assessed using 362 CMF CT scans, divided into a training set (60 scans), a validation set (14 scans), and an unlabeled set (288 scans). Result: The proposed SSL model attained a detection error of 1.60 ± 0.87 mm, significantly surpassing the performance of conventional fully supervised learning model (1.94 ± 1.12 mm). Notably, the proposed SSL model achieved equivalent detection accuracy (1.91 ± 1.00 mm) with only half the labeled dataset, compared to the fully supervised learning model. Conclusions: The proposed SSL model demonstrated exceptional performance in landmarks detection using a limited labeled CMF CT dataset, significantly reducing the workload of medical professionals and enhances the accuracy of 3D cephalometric analysis.

Undifferentiated embryonal sarcoma of the liver in children: our experience in four difficult cases and three-dimensional practical exploration.

AIMS: To explore rare and difficult cases of undifferentiated embryonal sarcoma of the liver (UESL) in children in a single centre, summarize the diagnosis and treatment experience and analyse the role of a computer-assisted surgery system (Hisense CAS), thus providing a new global vision and three-dimensional perspective. METHODS: We retrospectively collected the clinical data including the diagnoses and treatment processes, of children with UESL confirmed by histopathological examination in our hospital from January 2009 to December 2020. The relationship between the tumour volume and important blood vessels and between the liver volume and tumour volume, as well as other three-dimensional characteristics in the reconstructed three-dimensional model were analysed using Hisense CAS. The findings from this analysis can be used to aid in surgical decision-making and preoperative planning. RESULTS: Four children-3 girls and 1 boy-with UESL were included in the study. The age at onset ranged from 6 to 8 years. All four children presented with symptoms of abdominal discomfort, and abdominal masses were detected during physical examination. Owing to the wishes of their parents and the possibility that the disease was benign, all four children underwent one-stage radical surgery. For patient 1, a three-dimensional reconstruction was created during the initial diagnosis, which made accurate evaluation and planning of the preoperative procedure challenging. In patient 2, the tumour was located in the middle lobe of the liver and involved the first and second hepatic hilum. For patient 3, the pathological diagnosis of the tumour after surgery was challenging, but eventually, the diagnosis was confirmed through histochemistry and consultation with higher-level hospitals. Patient 4 had a giant tumour, which had a preoperative simulated future liver remnant volume (FLV) that was 21.0% of the total volume of the liver and tumour (TLTV). According to the standard liver volume (SLV) for children, the FLV was 77.0% of the SLV, making surgery feasible. All four children underwent complete resection, and only patient 4 experienced recurrence below the diaphragm 19 months after surgery. Currently, the 3-year overall survival rate is 100%, and the 3-year event-free survival rate is 75%. CONCLUSION: UESL in children is rare, and the key to diagnosis and treatment is complete surgical resection. Through individualized three-dimensional surgical planning, accurate and complete resection of difficult and complex UESL in children can be achieved, leading to a favourable prognosis.

Accuracy of dynamic computer-assisted implant surgery in fully edentulous patients: An in vitro study.

OBJECTIVES: To compare miniscrew versus bone tracing registration methods on dental implant placement accuracy and time efficiency in edentulous jaws using a dynamic computer-assisted implant surgery (d-CAIS) system. METHODS: Twelve fully edentulous maxillary models were allocated into two groups: miniscrew tracing (MST) group, where registration was performed by tracing four miniscrews; and bone tracing (BT) group, where registration was conducted by tracing maxillary bone fiducial landmarks. Six implants were placed on each model using the X-Guide® d-CAIS system. Pre- and postoperative cone-beam computed tomography (CBCT) scans were superimposed to evaluate implant placement accuracy. The time required for registration and the overall surgery time were also recorded. RESULTS: Thirty-six implants were placed in each group. The MST group showed significantly lower mean angulation deviations (mean difference (MD): -3.33°; 95 % confidence interval (CI): -6.56 to -0.09); p = 0.044), 3D platform deviations (MD: -1.01 mm; 95 % CI: -1.74 to -0.29; p = 0.006), 2D platform deviations (MD: -0.97 mm; 95 % CI: -1.71 to -0.23; p = 0.010), and 3D apex deviations (MD: -1.18 mm; 95 % CI: -1.92 to -0.44; p = 0.002) versus the BT group. The overall surgery time was similar for both groups (MD: 6.10 min.; 95 % CI: -0.31 to 12.51; p = 0.06), though bone tracing required significantly more time compared with miniscrew registration (MD: 4.79 min.; 95 % CI: 2.96 to 6.62; p < 0.05). CONCLUSIONS: Registration with MST increases the accuracy of implant placement with a d-CAIS system in edentulous jaws compared with the BT method, and slightly reduces the overall surgery time. CLINICAL SIGNIFICANCE: Miniscrew tracing registration improves implant placement accuracy in comparison with bone tracing registration.

One-stage prosthodontically driven jaw reconstruction in patients with benign and malignant pathologies: A 7- to 11-year cohort study.

OBJECTIVES: One stage functional jaw reconstruction is defined as the resection and reconstruction of segmental defects in conjunction with the placement of dental implants in an ideal prosthetic position and loaded with a provisional restoration, during one surgical procedure. The aim of the study is to describe clinical outcomes of patients who underwent one stage functional jaw reconstruction. METHODS: Patients who underwent one-stage functional jaw reconstruction, from January 2013 to March 2016 were recalled in 2022 and 2023. Planning and execution for the reconstruction utilized either analogue or digital techniques. Outcome parameters recorded were treatment-related outcomes at patient level, implant-related outcomes and patient-reported outcome measures. RESULTS: Eighteen patients underwent one-stage jaw reconstruction with a total of 57 implants. Four patients had maxillary and 14 had mandibular reconstructions. Ten patients underwent postoperative radiotherapy. Ten patients were planned using analogue and eight by digital planning. Three patients had partial flap necrosis, three patients had plate fractures, implant loss was seen in one patient and four patients died during the period. A functional prosthesis was provided in 16 out of the 18 patients. CONCLUSION: One-stage functional jaw reconstruction is a predictable method for providing rehabilitation with successful outcomes at 7-11 years. However, caution should be exercised when the treatment modality is carried out in patients with malignant pathologies who have undergone radiotherapy.

Computer-assisted revision total knee arthroplasty does not improve postoperative knee prosthesis alignment compared to the conventional technique.

Purpose: Computer-assisted surgery (CAS) during primary total knee arthroplasty (TKA) prosthesis alignment. However, literature on its use during revision TKA (rTKA) is scarce. Moreover, the effect of CAS during rTKA on rotational alignment of the prosthesis has not been described yet. The purpose of this study was to assess the effect of CAS during rTKA, focusing on the number of outliers and coronal, sagittal and rotational prosthetic alignment compared to conventional rTKA. Methods: A prospective cohort study comparing CAS-rTKA with a historical control group (CON-rTKA). The CAS-rTKA group (54 patients/62 knees) underwent rTKA using imageless CAS between 2012 and 2017. The CON-rTKA group (13 patients/23 knees) was operated using the conventional technique between 2002 and 2012. Postoperative alignment was measured using the EOS-2D/3D system (coronal and sagittal planes) and computed tomography scan (rotation). Results: No significant differences between the CAS-rTKA and CON-rTKA groups were found for coronal and sagittal alignment regarding the mechanical angle of the leg (p = 0.08), mechanical lateral distal femoral angle (p = 0.87), mechanical medial proximal tibial angle (p = 0.40), anatomical proximal posterior tibial angle (p = 0.43) nor femoral (p = 0.80) and tibial rotation (p = 0.15). For the proportions of coronal, sagittal and rotational outliers, no significant differences were found either. Conclusion: This study showed no evidence that use of CAS during rTKA leads to improved coronal, sagittal or rotational alignment of knee prostheses or a difference of outliers between the groups. Level of Evidence: Level III, therapeutic.

NextLens-The Next Generation of Surgical Navigation: Proof of Concept of an Augmented Reality System for Surgical Navigation.

Objective The aim of this work was the development of an augmented reality system including the functionality of conventional surgical navigation systems. Methods An application software for the Augmented Reality System HoloLens 2 from Microsoft was developed. It detects the position of the patient as well as position of surgical instruments in real time and displays it within the two-dimensional (2D) magnetic resonance imaging or computed tomography (CT) images. The surgical pointer instrument, including a pattern that is recognized by the HoloLens 2 sensors, was created with three-dimensional (3D) printing. The technical concept was demonstrated at a cadaver skull to identify anatomical landmarks. Results With the help of the HoloLens 2 and its sensors, the real-time position of the surgical pointer instrument could be shown. The position of the 3D-printed pointer with colored pattern could be recognized within 2D-CT images when stationary and in motion at a cadaver skull. Feasibility could be demonstrated for the clinical application of transsphenoidal pituitary surgery. Conclusion The HoloLens 2 has a high potential for use as a surgical navigation system. With subsequent studies, a further accuracy evaluation will be performed receiving valid data for comparison with conventional surgical navigation systems. In addition to transsphenoidal pituitary surgery, it could be also applied for other surgical disciplines.

Efficacy of the nasal airflow-inducing maneuver in the olfactory rehabilitation of laryngectomy patients: A systematic review and meta-analysis.

INTRODUCTION: This is the first systematic review and meta-analysis to investigate the effectiveness of the nasal airflow-inducing maneuver (NAIM) in olfactory rehabilitation for total laryngectomy (TL) patients. METHODS: We conducted a systematic literature search following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The inclusion criteria required that patients must have undergone a TL with subsequent NAIM training for at least 2 weeks and olfactory evaluation. The impact of NAIM on olfactory outcomes compared to that at baseline was measured. Olfactory measures included the Sniffin' Sticks Test, Smell Disk Test, Scandinavian Odor Identification Test, and Quick Odor Detection Test. The primary outcome measures were the proportion of patients with normosmia at baseline and after intervention. RESULTS: Seven studies from 2000 to 2023 comprising a total of 290 TL patients met the inclusion criteria. The meta-analysis revealed that prior to intervention, the pooled proportion of patients with normosmia was 0.16 (95% confidence interval [CI]: 0.09‒0.27, p = 0.01). After intervention, the same proportion increased to 0.55 (95% CI: 0.45‒0.68, p = 0.001). Among the included patients, 88.3% were initially anosmic or hyposmic, which was reduced to 48.9% after NAIM practice, with 51.1% achieving normosmia. The percent improvement was not found to be significantly associated with the timing of intervention post-TL (p = 0.18). CONCLUSIONS: NAIM increased the proportion of patients who achieved normosmia in TL patients. NAIM stands out as a safe, easily teachable maneuver with promising results. Further efforts are warranted to provide specific recommendations and guidelines for the use of NAIM in clinical practice.

Computer-Assisted Implant Planning: A Review of Data Registration Techniques.

Computer-assisted implant planning allows for a comprehensive treatment plan by combining radiographic data provided by a Cone Beam Computed Tomography (CBCT) with surface optical scan (IOs) data that includes patient intraoral situation and the intended restorative planning. Integrating a tailored restorative design with the patient's anatomical conditions through virtual implant planning allows for an ideal bio-restorative treatment planning to maximize biological, functional, and esthetic outcomes. This article discusses dataset registration techniques that combine radiographic CBCT data with restorative information as the main path to create a virtual patient. The described techniques include the use of removable radiographic templates with radiopaque markers, dual scan technique, and direct digital file registration of intra-oral scans using anatomical references. Depending on the individual clinical situation, different factors must be considered to appropriately select methods that achieve an optimal registration of diverse datasets. An inherent challenge lies in the presence of scattering artifacts in CBCT scans. Two approaches are proposed for these situations - the use of chairside-fabricated composite resin markers or adhesive spot-markers fabricated for the use with CBCT scans. Both techniques exhibit limitations that need to be taken into consideration. Further approaches should be developed for situations involving scattering in CBCT.

Acromioclavicular joint dislocation with loop double endobutton fixation assisted by orthopaedic surgery robot positioning system.

OBJECTIVE: Acute acromioclavicular (AC) joint dislocation is a common orthopedic injury that can significantly impair shoulder function and reduce quality of life. Effective treatment methods are essential to restore function and alleviate pain. To investigate the short-term clinical efficacy of the minimally invasive closed-loop double endobutton fixation assisted by orthopaedic surgery robot positioning system (TiRobot) in the treatment of AC joint dislocation, and to evaluate its feasibility and safety. METHODS: The clinical data of 19 patients with AC joint dislocation who underwent treatment with closed-loop double Endobutton fixation assisted by TiRobot between May 2020 and December 2022 were retrospectively analyzed. Visual Analog Scale (VAS) pain scores, the Constant Murley Score (CMS), and shoulder abduction range of motion were assessed and compared preoperatively and at the last follow-up. Computed tomography (CT) parameters of the acromioclavicular joint, including acromioclavicular distance (ACD), the distance between the upper and lower Endobutton (DED), the horizontal distance between the anterior edge of the distal clavicle and the anterior edge of the acromion (DACC), the diameter of the clavicular tunnel (DCT), and coracoid tunnel diameter (DC), were compared at 2 days, and 1 month after surgery, as well as at the last follow-up, along with the evaluation of intraoperative and postoperative complications. RESULTS: The postoperative VAS, CMS, and shoulder-abduction range of motion were significantly improved compared with the preoperative (all, P<0.05). The statistical analysis showed no significant difference in the CT image parameters of the acromioclavicular joint at 2 days and 1 month after surgery(all, P>0.05). Comparisons of DCT and DC revealed statistically significant differences between the last follow-up and 1 month after surgery (P<0.05), and no statistically significant difference was found in ACD, DED, and DACC(all, P>0.05). There were no complications such as infection or vascular or neurological damage, no cases of rostral or clavicle fractures, loss of reduction, heterotopic ossification, shoulder stiffness, and no loosening or breaking of internal fixations. CONCLUSION: Closed-loop double endobutton internal fixation assisted by TiRobot is an ideal method for the treatment of acute acromioclavicular (AC) joint dislocation. This method has the advantages of relatively simple operation, more accurate localization of bone tunnel during operation, less surgical trauma, and good recovery of shoulder function.

Tooth autotransplantation with adjunctive application of enamel matrix derivatives using a digital workflow: A prospective case series.

OBJECTIVES: Digital protocols and bioactive materials may reduce complications and improve tooth autotransplantation (ATT) success and survival rates. This prospective study assesses the performance of a fully digital autotransplantation protocol of close-apex molars with the adjunctive application of Enamel Matrix Derivatives (EMD). METHODS: Twelve adult patients with 13 hopeless molar teeth were replaced with autotransplantation of closed apex third molars. Outcomes, including success and survival rates, clinical, endodontic, radiographic, patient-reported outcome measures (PROMs), and digital image assessments, were conducted over a two-year follow-up period. RESULTS: Survival and success rates were 100% and 91.2%, respectively, with no progressive inflammatory or replacement root resorption (ankylosis) except for one tooth presenting radiographic furcation involvement. A significant probing depth reduction of 2.4 ± 2.58 mm and CAL gains of 2.8 ± 3.03 mm were observed in transplanted teeth compared to the hopeless receptor teeth. Radiographic bone levels remained stable throughout the study period (-0.37 ± 0.66 mm), and digital image assessments showed minimal alveolar ridge width changes (-0.32 to -0.7 mm) and gingival margin changes (-0.95 to -1.27 mm) from baseline to last visit. PROMs indicated very high patient satisfaction. CONCLUSION: The use of a digital ATT protocol with adjunctive use of EMD in closed-apex third molars demonstrated promising short-term high success and survival rates. Additionally, this type of therapy adequately preserves the dimensions of the alveolar ridge in the receptor site. CLINICAL SIGNIFICANCE: This is the first prospective clinical study examining the effect of a digital tooth autotransplantation protocol combined with the application of EMD. It demonstrates that this approach is an effective treatment for replacing hopeless teeth and also validates the digital assessment of ATT alveolar ridge preservation at the recipient site.

One year "ADAPT system" use for proximal femoral fracture osteosynthesis with intramedullary nail . A case control study.

Introduction: Proximal femoral fractures (PFF) are a significant health concern among the elderly, often leading to complications and high mortality rates. Intramedullary nailing is widely considered the most effective treatment for lateral proximal femoral fractures (LPFF), with the Tip Apex Distance (TAD) being a crucial predictor of surgical success. This study aimed to compare outcomes between patients treated with and without the ADAPT (ADAptive Positioning Technology) system, which aids in the precise placement of the cephalic screw. Materials and Methods: A retrospective analysis was conducted on 97 patients with intertrochanteric fractures treated in 2022. Patients were divided into two groups: those treated with the ADAPT system (group I, n=34) and those treated without it (group II, n=63). Fractures were classified according to AO/OTA classification. The primary outcomes measured were operative time, cephalic screw angle, TAD, and incidence of lag screw cut-out. Statistical analyses included chi-square tests and t-tests, with significance set at P < 0.05. Results: The ADAPT system did not significantly reduce TAD (18.21 mm in the ADAPT group vs. 19.94 mm in the control group, p=0.149). Operative times were similar between the groups. The incidence of lag screw cut-out was low in both groups, with no significant differences. The study confirmed a strong correlation between higher TAD and increased risk of screw cut-out, underscoring the importance of precise screw placement. Discussion: Computer-assisted surgery, such as the ADAPT system, aims to enhance the accuracy of cephalic screw placement. In this study, the ADAPT system didn't demonstrate a statistically significant advantage in reducing TAD or preventing screw cut-out. Nevertheless, the critical role of TAD in preventing fixation failure was reaffirmed, emphasising the need for precise surgical techniques. Conclusion: While the ADAPT system did not show a significant advantage in reducing TAD or preventing screw cut-out in this study, the importance of achieving optimal TAD in cephalomedullary nailing was reinforced. Future research should continue to explore the role of computer-assisted systems in enhancing surgical accuracy and improving outcomes for patients with LPFF.

Short-Term Outcomes of Total Knee Arthroplasty Using a Conventional, Computer-Assisted, and Robotic Technique: A Pilot Clinical Trial.

Background: Total Knee Arthroplasty (TKA) is a prevalent surgical procedure for treating severe knee arthritis, aiming to alleviate pain and restore function. Recent advancements have introduced computer-assisted (CAS) and robot-assisted (RA-TKA) surgical techniques as alternatives to conventional methods, promising improved accuracy and patient outcomes. However, comprehensive comparative studies evaluating the short-term outcomes and prostheses survivorship among these techniques are limited. We hypothesized that the outcome of RA-TKA and/or CAS- TKA is advantageous in function and prosthesis survivorship compared to manually implanted prostheses. Methods: This prospective controlled study compared the short-term outcomes and prostheses survivorship following TKA using conventional, CAS, and RA-TKA techniques. One hundred seventy-eight patients requiring TKA were randomly assigned to one of the three surgical groups. The primary outcomes were knee function (KSS knee score) and functional recovery (KSS function score), which were assessed before surgery three years postoperatively. Secondary outcomes included prosthesis alignment, knee range of movements, and complication rates. Survivorship analysis was conducted using Kaplan-Meier curves, with revision surgery as the endpoint. Results: While all three groups showed significant improvements in knee function postoperatively (p < 0.001), the CAS and RA-TKA groups demonstrated superior prosthetic alignment and higher survivorship rates than the conventional group (100%, 97%, and 96%, respectively). However, although the RA-TKA group had a maximal 100% survivorship rate, its knee score was significantly lower than following CAS and conventional techniques (mean 91 ± 3SD vs. mean 93 ± 3SD, p = 0.011). Conclusion: The RA-TKA technique offers advantages over conventional and CAS methods regarding alignment accuracy and short-term survivorship of TKA prostheses. Since short-term prosthesis survivorship indicates the foreseen rates of mid- and long-term survivorship, the current data have a promising indication of the improved TKA prosthesis's long-term survivorship by implementing RA-TKA. According to the presented data, although the survival rates were 100%, 97%, and 96% in the three study groups, no clinical difference in the functional outcome was found despite the better mechanical alignment and higher survivorship in the group of patients treated by the RA-TKA.

Robotic Total Knee Arthroplasty: An Update.

Total knee arthroplasty (TKA) is a gold standard surgical procedure to improve pain and restore function in patients affected by moderate-to-severe severe gonarthrosis refractory to conservative treatments. Indeed, millions of these procedures are conducted yearly worldwide, with their number expected to increase in an ageing and more demanding population. Despite the progress that has been made in optimizing surgical techniques, prosthetic designs, and durability, up to 20% of patients are dissatisfied by the procedure or still report knee pain. From this perspective, the introduction of robotic TKA (R-TKA) in the late 1990s represented a valuable instrument in performing more accurate bone cuts and improving clinical outcomes. On the other hand, prolonged operative time, increased complications, and high costs of the devices slow down the diffusion of R-TKA. The advent of newer technological devices, including those using navigation systems, has made robotic surgery in the operatory room more common since the last decade. At present, many different robots are available, representing promising solutions to avoid persistent knee pain after TKA. We hereby describe their functionality, analyze potential benefits, and hint at future perspectives in this promising field.