Cork Façades as an Innovative and Sustainable Approach in Architecture: A Review of Cork Materials, Properties and Case Studies.

Façades give the first impression of a structure, reflecting the overall aesthetic appeal, architectural styles, cultural influences, and technological advancements. Emphasis on sustainability is increasing, with a shift towards eco-friendly and energy-saving materials, triggered by decreasing the environmental impact of construction. Cork is a green competitive material for various engineering and design applications due to its biological formation, sustainable production and a portfolio of properties including low density, impermeability, viscoelastic behaviour and high thermal insulation that derive from its cellular and chemical features. This work presents cork materials used in building façades and their properties, also giving information on cork production and processing into cork-based products as a review of the existing published research, while also identifying knowledge gaps and further research needed. Historical examples of cladding of constructions with raw cork are given, while the contemporary innovative use of cork façades was triggered by some designs of well-known architects with outdoor application of expanded cork agglomerates. Examples of different historical and contemporary constructions were assembled and critically assessed by the authors. The aim is to give integrated information of cork as a natural, renewable and sustainable material to raise the interest of designers, architects and engineers to explore cork, blending aesthetics with environmental responsibility, targeting a more sustainable and resilient built environment.

Is a cork a legal shortcut? - A comparison of the measured and assumed amount of rotation in freestyle tricks.

In snowboard freestyle disciplines, the amount of rotation is commonly determined as the sum of rotations around all board axes and is the most important indicator of the trick difficulty across all snowboard freestyle disciplines. Based on the type of rotation, tricks can be classified as flatspins, corks and flips. It is not yet known whether the type of rotation of a trick can influence the actual amount of rotation. Therefore, the aim of this study was to determine the amount of deviation, defined as difference between measured and assumed amount of rotation as a function of trick classification, using kinematic motion analysis. The amount of deviation was positive for flatspins (median: 21°; min: -4°; max: 49°) and negative for corks (median: -25°; min: -89°; max: 12°) and flips (median: -28°; min: -94°; max: 13°). Our results demonstrate that there are ways of execution where riders perform corks and flips with a shortcut and flatspins with a detour. This should be taken into account by judges, coaches and riders. Further research is needed to investigate how the shortcut can be influenced.

Small molecule inhibitors of human LRRK2 enhance in vitro embryogenesis and microcallus formation for plant regeneration of crop and model species.

In vitro plant embryogenesis and microcallus formation are systems which are required for plant regeneration, a process during which cell reprogramming and proliferation are critical. These systems offer many advantages in breeding programmes, such as doubled-haploid production, clonal propagation of selected genotypes, and recovery of successfully gene-edited or transformed plants. However, the low proportion of reprogrammed cells in many plant species makes these processes highly inefficient. Here we report a new strategy to improve in vitro plant cell reprogramming using small molecule inhibitors of mammalian leucine rich repeat kinase 2 (LRRK2), which are used in pharmaceutical applications for cell reprogramming, but never used in plants before. LRRK2 inhibitors increased in vitro embryo production in three different systems and species, microspore embryogenesis of oilseed rape and barley, and somatic embryogenesis in cork oak. These inhibitors also promoted plant cell reprogramming and proliferation in Arabidopsis protoplast cultures. The benzothiazole derivative JZ1.24, a representative compound of the tested molecules, modified the expression of the brassinosteroid (BR)-related genes BIN2, CPD, and BAS1, correlating with an activation of BR signaling. Additionally, the LRRK2 inhibitor JZ1.24 induced the expression of the embryogenesis marker gene SERK1-like. The results suggest that the use of small molecules from the pharmaceutical field could be extended to promote in vitro reprogramming of plant cells towards embryogenesis or microcallus formation in a wider range of plant species and in vitro systems. This technological innovation would help to develop new strategies to improve the efficiency of in vitro plant regeneration, a major bottleneck in plant breeding.

Overexpression of Ginkbilobin-2 homologous domain gene improves tolerance to Phytophthora cinnamomi in somatic embryos of Quercus suber.

In recent decades an extensive mortality and decline of Quercus suber populations mainly caused by Phytophthora cinnamomi has been observed. In the current study, a chestnut gene homologous to ginkbilobin-2 (Cast_Gnk2-like), which in Ginkgo biloba codifies an antifungal protein, was transferred into cork oak somatic embryos of three different embryogenic lines by Agrobacterium mediated transformation. The transformation efficiency varied on the genotype from 2.5 to 9.2%, and a total of 22 independent transformed lines were obtained. The presence of Cast_Gnk2-like gene in transgenic embryos was verified in all lines by PCR. The number of transgene copies was estimated by qPCR in embryogenic lines with high proliferation ability and it varied between 1 and 5. In addition, the expression levels of Cast_Gnk2-like gene were determined in the embryogenic lines, with higher levels in lines derived from the genotype ALM6-WT. Transgenic plants were obtained from all transgenic lines and evaluated after cold storage of the somatic embryos for 2 months and subsequent transfer to germination medium. In vitro tolerance tests made under controlled conditions and following zoospore treatment showed that plants overexpressing Cast_Gnk2-like gene improved tolerance against Pc when compared to wild type ones.

Effect of Microwave Radiation on the Properties of Hydrogel, Cork, Perlite, and Ceramsite.

The present work analyzes the effect of releasing physically bound water from hydrogel, cork, perlite, and ceramsite on materials exposed to microwave radiation and subsequently investigates possible changes in the physical properties of these materials (water absorption and thermal conductivity coefficient). The release of physically bound water from individual materials has potential practical applications in materials engineering, for example, in the internal curing of concrete, where individual aggregates could, under the influence of microwave radiation, release water into the structure of the concrete and thus further cure it. Experimental analysis was carried out with samples of the above-mentioned materials, which were first weighed and then immersed in water for 24 h. Then, they were weighed again and exposed to microwave radiation. After exposure, the samples were weighed again, left immersed in water for 24 h, and weighed again. The focus of the study was on the ability of the aggregates to release water due to microwave radiation and on the changes in the properties (water absorption, thermal conductivity coefficient) of these materials when exposed to microwave radiation. The samples were further monitored by digital microscopy for possible changes in the surface layer of the materials. The hydrogels show the highest water absorption (1000%) and the fastest water release (45 min to complete desiccation). After the release of water due to microwave radiation, their ability to absorb water is maintained. Of interest, however, is that in the case of almost complete removal of water from the soaked hydrogel, the original powdered state of the hydrogel is not obtained, but the outcome has rather a solid structure. In the case of cork, the water absorption depends on the fraction of the material.

Mitigating CO2 emissions through an industrial symbiosis approach: Leveraging cork ash carbonation.

This study explores for the first time the potential use of carbonation as a method for managing cork ash, a byproduct of biomass waste incineration. Additionally, the cork ash was combined with fly ash from municipal solid waste incineration to leverage the carbonation reaction's ability to stabilize heavy metals. The findings suggest that subjecting biomass ash to carbonation can lead to the formation of mineral carbonates, effectively capturing CO2 and reducing its release into the atmosphere. The combination of various alkaline wastes and the stabilization of leachable heavy metals through carbonation reactions also opens opportunities for synergies between different industrial sectors. Finally, the study proposes a route for the obtained materials valorisation via 'end of waste': the reuse of the resulting materials as substitutes for natural resources, particularly in applications like building materials and polymer composites, can further enhance carbon dioxide savings.

Trichoscopic and Clinico-Morphological Evaluation of Tinea Capitis.

Introduction: Tinea capitis (TC) is a common fungal infection of the scalp, especially in children. Trichoscopy is a noninvasive technique that allows rapid and magnified in vivo observation of the hair with the visualization of morphologic features that are often imperceptible to the naked eye. Aim: This study aimed to evaluate the usefulness of trichoscopy in clinical diagnosis and to study various clinico-morphological patterns of TC. Materials and Methods: This cross-sectional, observational study included 140 clinically diagnosed cases of TC seen during a period of 1 year (April 2021 to March 2022). All patients were evaluated using a dermoscope (DermLite DL4 Multispectral 3 Gen, San Juan Capistrano, CA, USA,10×). Results: The prevalence rate of TC in this study was 2.69 per thousand population. The most common clinical variant was gray patch followed by kerion and black dot, and the most common etiological agent was Trichophyton tonsurans. The characteristic trichoscopic features were as follows: comma hairs (80%), followed by corkscrew hairs (68.6%), bent hairs (54.2%), zigzag hairs (35.7%), and morse code-like hairs (15%). Other findings included scaling (89.2%), followed by black dot (67.1%), broken hairs (42.8%), and crusting and pustules (32.1% each). Comma and corkscrew-shaped hairs were most common in the black dot type, whereas zigzag, bent hairs, and morse code hairs were common in the gray patch type of TC. There was a significant association between trichoscopic findings and type of TC. Conclusion: Trichoscopy can be considered a novel tool for rapid diagnosis and selection of the appropriate therapy and in the monitoring of treatment efficacy in TC.

Rhytidome- and cork-type barks of holm oak, cork oak and their hybrids highlight processes leading to cork formation.

BACKGROUND: The periderm is basic for land plants due to its protective role during radial growth, which is achieved by the polymers deposited in the cell walls. In most trees, like holm oak, the first periderm is frequently replaced by subsequent internal periderms yielding a heterogeneous outer bark made of a mixture of periderms and phloem tissues, known as rhytidome. Exceptionally, cork oak forms a persistent or long-lived periderm which results in a homogeneous outer bark of thick phellem cell layers known as cork. Cork oak and holm oak distribution ranges overlap to a great extent, and they often share stands, where they can hybridize and produce offspring showing a rhytidome-type bark. RESULTS: Here we use the outer bark of cork oak, holm oak, and their natural hybrids to analyse the chemical composition, the anatomy and the transcriptome, and further understand the mechanisms underlying periderm development. We also include a unique natural hybrid individual corresponding to a backcross with cork oak that, interestingly, shows a cork-type bark. The inclusion of hybrid samples showing rhytidome-type and cork-type barks is valuable to approach cork and rhytidome development, allowing an accurate identification of candidate genes and processes. The present study underscores that abiotic stress and cell death are enhanced in rhytidome-type barks whereas lipid metabolism and cell cycle are enriched in cork-type barks. Development-related DEGs showing the highest expression, highlight cell division, cell expansion, and cell differentiation as key processes leading to cork or rhytidome-type barks. CONCLUSION: Transcriptome results, in agreement with anatomical and chemical analyses, show that rhytidome and cork-type barks are active in periderm development, and suberin and lignin deposition. Development and cell wall-related DEGs suggest that cell division and expansion are upregulated in cork-type barks whereas cell differentiation is enhanced in rhytidome-type barks.

Long-term durability of discarded cork-based composites obtained by geopolymerization.

Geopolymers are amorphous aluminosilicate inorganic polymers synthesized by alkaline activation characterized by a lower carbon footprint, greater durability, and excellent mechanical properties compared to traditional concrete, making them promising building materials for sustainable construction. To develop sustainable lightweight geopolymer-based building materials useful as fire resistant thermal insulation materials, we added 5 and 10 wt% of discarded cork dust, a readily available industrial by-product, to metakaolin before and after the alkaline activation with sodium hydroxide 8 M and sodium silicate solutions. We followed the chemical, microstructural, antibacterial, and physical properties of the resulting composites for up to 90 days in order to monitor their long-term durability. The presence of cork does not interfere with the geopolymerization process and in fact reduces the density of the composites to values around 2.5 g/cm3, especially when added after alkaline activation. The composites resulted in chemically stable matrices (less than 10 ppm of cations release) and filler (no hazardous compounds released) with a bacterial viability of around 80%. This study provides valuable insights into the tailoring of discarded cork-based composites obtained by geopolymerization with a porosity between 32 and 48% and a mechanical resistance to compression from 15 to 5 MPa, respectively, suggesting their potential as durable interior panels with low environmental impact and desirable performance.

Genome-Wide Identification of GAST Family Members and Their Potential Roles in Epicotyl Dormancy in Chinese Cork Oak (Quercus variabilis).

Chinese cork oak (Quercus variabilis Blume) is a widespread tree species with high economic and ecological values. Chinese cork oak exhibits epicotyl dormancy, causing emergence heterogeneity and affecting the quality of seedling cultivation. Gibberellic acid-stimulated transcript (GAST) is a plant-specific protein family that plays a crucial regulatory role in plant growth, development, and seed germination. However, their evolution in Chinese cork oak and roles in epicotyl dormancy are still unclear. Here, a genome-wide identification of the GAST gene family was conducted in Chinese cork oak. Ten QvGAST genes were identified, and nine of them were expressed in seed. The physicochemical properties and promoter cis-acting elements of the selected Chinese cork oak GAST family genes indicated that the cis-acting elements in the GAST promoter are involved in plant development, hormone response, and stress response. Germinated seeds were subjected to gibberellins (GAs), abscisic acid (ABA), and fluridone treatments to show their response during epicotyl dormancy release. Significant changes in the expression of certain QvGAST genes were observed under different hormone treatments. QvGAST1, QvGAST2, QvGAST3, and QvGAST6 exhibited upregulation in response to gibberellin. QvGAST2 was markedly upregulated during the release of epicotyl dormancy in response to GA. These findings suggested that QvGAST2 might play an important role in epicotyl dormancy release. This study provides a basis for further analysis of the mechanisms underlying the alleviation of epicotyl dormancy in Chinese cork oak by QvGASTs genes.

Deep eutectic solvent pretreatment of cork dust - Effects on biomass composition, phenolic extraction and anaerobic degradability.

In this study, phenolic compounds using deep eutectic solvents (DES) were extracted from cork dust, and the biogas production potential of DES-treated cork dust samples was determined. The DES treatment was carried out using choline chloride and formic acid (1:2 M ratio) at various temperatures (90, 110 and 130 °C) and treatment times (20, 40 and 60 min) at a solid-to-solvent ratio of 1:10 g mL-1. The highest total phenolic content (137 mg gallic acid equivalent (GAE) g-1 dry cork dust) was achieved at 110 °C/20 min. The extracts exhibited an antioxidant capacity of up to 56.3 ± 3.1 % 1,1-diphenyl-2-picrylhydazyl (DPPH) inhibition at a dilution rate of 100. DES treatment resulted in minimal sugar solubilization at low temperatures, while approximately 42 % of the xylan fraction in the biomass degraded under severe conditions (e.g., 130 °C/60 min). Catechin, 4-hydroxybenzoic acid and gallic acid were the major phenolics in DES extracts. The biogas yield of DES-treated cork dust increased with treatment severity. The highest biogas yield (115.1mLN gVS-1) was observed at 130 °C/60 min, representing an increase of 125 % compared to the untreated sample. SEM images revealed that the surface structure of the samples became smoother after mild pretreatment and rougher after harsh pretreatment. Compositional and FTIR analyses indicated that a higher biogas formation potential was associated with increased cellulose content in the substrate, which could be attributed to hemicellulose solubilization in the hydrolysate. Overall, DES pretreatment effectively enhanced phenol extraction and anaerobic degradability.

Shear thickening fluid (STF) in engineering applications and the potential of cork in STF-based composites.

Shear thickening fluids (STFs) are a unique type of fluids that can quickly transform into a solid-like state when subjected to forces (rate dependent). These fluids are created by dispersing micro and nanoparticles within a medium. When the force is removed, they return to their original liquid state. Shear thickening fluids can absorb a significant amount of impact energy, making them useful for reducing vibrations and serving as a damper. This study provides a comprehensive and brief overview of existing literature on shear thickening fluids, including their properties, classification, and the rheological mechanisms behind the shear thickening behaviour. It also examines the use of these fluids in various applications, such as improving resistance to stabs and spikes, protecting against low- and high-velocity impacts, and as a new medium for energy dissipation in industries such as battery safety, vibration control and adaptive structures. Lastly, this work reviews the promising combination of STFs with cork. Given the sustainability of cork and its energy absorption capacity, cork-STF composites are a promising solution for various impact-absorbing applications. Overall, the paper underscores the versatility and potential of STFs, and advocates for further research and exploration.

Pilot Study Investigating Effects of Changing Process Variables on Elastic and Energy-Absorbing Characteristics in Polyurethane/Agglomerated Cork Mix for Use in Micro-Transport Helmet.

This pilot investigation identifies the influence that changing the process variables of curing pressure, curing temperature, and mix ratio of a polyurethane/agglomerated cork matrix has on the mechanical properties of energy absorption, Young's modulus of elasticity, and spring stiffness in safety helmets intended for micro-transport riders. The results are compared to expanded polystyrene, a material commonly used in micro-transport helmets. Mechanical testing of the various samples found that, over the range tested, curing pressure had no effect on any of the mechanical properties, while increasing amounts of resin caused a stiffer structure, and increasing curing temperature led to increased energy absorption. Consistent with the elastic modulus findings, all polyurethane/agglomerated cork test samples demonstrated higher median levels of spring stiffness, ranging from 7.1% to 61.9% greater than those found for expanded polystyrene. The sample mixed at a 1.5:1 binder/cork ratio and cured at 40 °C displayed the closest spring stiffness to EPS. While the mechanical properties of the eco-friendly polyurethane/agglomerated cork matrix did not match those of expanded polystyrene, the difference in performance found in this study is promising. Further investigation into process variables could characterise this more ecologically based matrix with equivalent energy-absorbing and structural characteristics, making it equivalent to currently used expanded polystyrene and suitable for use in micro-transport helmets.

Eco-Friendly Cork-Polyurethane Biocomposites for Enhanced Impact Performance: Experimental and Numerical Analysis.

Cork composites are byproducts from wine stopper production, resulting from the agglomeration of cork granules with a thermoset resin. The resulting compound is a versatile and durable material with numerous industrial applications. Due to its unique properties, such as low-density, high-strength, excellent energy absorption, and good thermal and acoustic insulators, cork composites find room for application in demanding industries such as automotive, construction, and aerospace. However, agglomerated cork typically has a polyurethane matrix derived from petrochemical sources. This study focuses on developing eco-friendly porous polyurethane biocomposites manufactured with the used cooking oil polyol modified with cork. Since cork and polyurethane foam are typically used for impact shock absorption, the manufactured samples were subjected to impact loading. The assessment of crashworthiness is performed through 100 J impact tests. A finite element numerical model was developed to simulate the compression of these new composites under impact, and the model validation was performed. The highest specific absorbed energy was obtained for petrochemical polyol composites with the 3% addition of natural or modified cork. The research conducted in this study showcased the feasibility of substituting certain petrochemical components used for the synthesis of the polyurethane matrix with ecological waste vegetable oil components.

Effects of boiling water treatment on the physical properties of Quercus variabilis virgin cork grown in Korea.

The effects of boiling water treatment on the physical properties of Quercus variabilis virgin cork (Qv VC) were examined and compared with those of Quercus suber reproduction cork (Qs RC). The water treatment was conducted at 100 °C for 1 h. Qv VC showed a significantly higher dimensional change in the three directions and lower weight loss than Qs RC by boiling water treatment. Untreated and boiled Qv VC showed higher density, air-dried moisture content, red/green (a*) and yellow/blue (b*) chromaticity, overall color change, shrinkage in all three directions, moisture adsorption on the entire surface, and swelling per 1% moisture content than untreated and boiled Qs RC. However, the lightness (L*) and water absorption on each surface were higher for Qs RC than for Qv VC. Moisture adsorption on each surface was comparable before and after heat treatment for both species. After boiling water treatment, the air-dried moisture content, dimensions, volume shrinkage, water absorption, and moisture adsorption on each surface and the entire surface increased, whereas L*, a*, b*, and swelling per 1% moisture content decreased. The results of the present study could be useful for further utilization of Qv cork growing in Korea.

Morphology and chemical composition of Taiwan oil millet (Eccoilopus formosanus) epicuticular wax.

MAIN CONCLUSION: Taiwan oil millet has two types of epicuticular wax: platelet wax composed primarily of octacosanol and filament wax constituted essentially by the singular compound of octacosanoic acid. Taiwan oil millet (TOM-Eccoilopus formosanus) is an orphan crop cultivated by the Taiwan indigenous people. It has conspicuous white powder covering its leaf sheath indicating abundant epicuticular waxes, that may contribute to its resilience. Here, we characterized the epicuticular wax secretion in TOM leaf blade and leaf sheath using various microscopy techniques, as well as gas chromatography to determine its composition. Two kinds of waxes, platelet and filaments, were secreted in both the leaf blades and sheaths. The platelet wax is secreted ubiquitously by epidermal cells, whereas the filament wax is secreted by a specific cell called epidermal cork cells. The newly developed filament waxes were markedly re-synthesized by the epidermal cork cells through papillae protrusions on the external periclinal cell wall. Ultrastructural images of cork cell revealed the presence of cortical endoplasmic reticulum (ER) tubules along the periphery of plasma membrane (PM) and ER-PM contact sites (EPCS). The predominant wax component was a C28 primary alcohol in leaf blade, and a C28 free fatty acid in the leaf sheath, pseudopetiole and midrib. The wax morphology present in distinct plant organs corresponds to the specific chemical composition: platelet wax composed of alcohols exists mainly in the leaf blade, whereas filament wax constituted mainly by the singular compound C28 free fatty acids is present abundantly in leaf sheath. Our study clarifies the filament wax composition in relation to a previous study in sorghum. Both platelet and filament waxes comprise a protection barrier for TOM.

Effectiveness of cork and pine bark powders as biosorbents for potentially toxic elements present in aqueous solution.

Cork oak and pine bark, two of the most prolific byproducts of the European forestry sector, were assessed as biosorbents for eliminating potentially toxic elements (PTEs) from water-based solutions. Our research suggests that bioadsorption stands out as a viable and environmental eco-friendly technology, presenting a sustainable method for the extraction of PTEs from polluted water sources. This study aimed to evaluate and compare the efficiency of cork powder and pine bark powder as biosorbents. Specifically, the adsorption of Fe, Cu, Zn, Cd, Ni, Pb and Sn at equilibrium were studied through batch experiments by varying PTEs concentrations, pH, and ionic strength. Results from adsorption-desorption experiments demonstrate the remarkable capacity of both materials to retain the studied PTE. Cork powder and pine bark powder exhibited the maximum retention capacity for Fe and Cd, while they performed poorly for Pb and Sn, respectively. Nevertheless, pine bark showed a slightly lower retention capacity than cork. Increasing the pH resulted in cork showing the highest adsorption for Zn and the lowest for Sn, while for pine bark, Cd was the most adsorbed, and Sn was the least adsorbed, respectively. The highest adsorption of both materials occurred at pH 3.5-5, depending on the PTE tested. The ionic strength also influenced the adsorption of the various PTEs for both materials, with decreased adsorption as ionic strength increased. The findings suggest that both materials could be effective for capturing and eliminating the examined PTEs, albeit with different efficiencies. Remarkably, pine bark demonstrated superior adsorption capabilities, which were observed to vary based on the specific element and the experimental conditions. These findings contribute to elucidating the bio-adsorption potential of these natural materials, specifically their suitability in mitigating PTEs pollution, and favoring the recycling and revalorization of byproducts that might otherwise be considered residue.

Unraveling the Mechanism of Cork Spot-like Physiological Disorders in 'Kurenainoyume' Apples Based on Occurrence Location.

Cork spot-like physiological disorder (CSPD) is a newly identified issue in 'Kurenainoyume' apples, yet its mechanism remains unclear. To investigate CSPD, we conducted morphological observations on 'Kurenainoyume' apples with and without pre-harvest fruit-bagging treatment using light-impermeable paper bags. Non-bagged fruit developed CSPD in mid-August, while no CSPD symptoms were observed in bagged fruit. The bagging treatment significantly reduced the proportion of opened lenticels, with only 17.9% in bagged fruit compared to 52.0% in non-bagged fruits. In non-bagged fruit, CSPD spots tended to increase from the lenticels, growing in size during fruit development. The cuticular thickness and cross-sectional area of fresh cells in CSPD spots were approximately 16 µm and 1600 µm², respectively. Healthy non-bagged fruit reached these values around 100 to 115 days after full bloom from mid- to late August. Microscopic and computerized tomography scanning observations revealed that many CSPD spots developed at the tips of vascular bundles. Therefore, CSPD initiation between opened lenticels and vascular bundle tips may be influenced by water stress, which is potentially caused by water loss, leading to cell death and the formation of CSPD spots.

Application of NIR Spectroscopy for the Valorisation of Cork By-Products: A Feasibility Study over the Screening and Discrimination of Chemical Compounds of Interest.

Quercus suber is considered a sustainable tree mainly due to its outer layer (cork) capacity to regenerate after each harvesting cycle. Cork bark is explored for several application; however, its industrial transformation generates a significant amount of waste. Recently, cork by-products have been studied as a supplier of bioactive ingredients. This work aimed to explore whether near infrared spectroscopy (NIRS), a non-destructive analysis, can be employed as a screening device for selecting cork by-products with higher potential for bioactives extraction. A total of 29 samples of cork extracts were analysed regarding their qualitative composition. Partial least squares (PLS) models were developed for quantification purposes, and R2P and RER values of 0.65 and above 4, respectively, were obtained. Discrimination models, performed through PLS-DA, yielded around 80% correct predictions, revealing that four out of five of samples were correctly discriminated, thus revealing that NIR can be successfully applied for screening purposes.