Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 232
Filtrar
Más filtros












Intervalo de año de publicación
1.
Int J Biol Macromol ; 277(Pt 3): 134176, 2024 Aug 01.
Artículo en Inglés | MEDLINE | ID: mdl-39096834

RESUMEN

Exploring efficient and comprehensive utilization of agricultural waste to produce high value-added products has been global research hotspot. In this study, a novel process for integrated production of xylose and docosahexaenoic acid (DHA) from hemicellulose and cellulose in corncob was developed. Corncob was treated with dilute H2SO4 at 121 °C for 1 h and xylose was readily produced with a recovery yield of 79.35 %. The corncob residue was then subject to alkali pretreatment under optimized conditions of 0.1 g NaOH/g dry solid, 60 °C for 2 h, and the contents of cellulose, hemicellulose, and lignin in the resulting residue were 87.49 %, 7.58 % and 2.31 %, respectively. The cellulose in the residue was easily hydrolyzed by cellulase, yielding 74.87 g/L glucose with hydrolysis efficiency of 77.02 %. Remarkably, the corncob residue hydrolysate supported cell growth and DHA production in Schizochytrium sp. ATCC 20888 well, and the maximum biomass of 32.71 g/L and DHA yield of 4.63 g/L were obtained, with DHA percentage in total fatty acids of 36.89 %. This study demonstrates that the corncob residue generated during xylose production, rich in cellulose, can be effectively utilized for DHA production by Schizochytrium sp., offering a cost-effective and sustainable alternative to pure glucose.

2.
Int J Biol Macromol ; 275(Pt 2): 133695, 2024 Jul 05.
Artículo en Inglés | MEDLINE | ID: mdl-38972648

RESUMEN

Biomass-based hydrogels have become a research hotspot because of their better biocompatibility. However, the preparation of biomass hydrogels is complicated, and they often need to be modified by introducing other substances. In this study, corncob pretreated with bisulfite (125-185 °C) was used as a raw material to prepare lignocellulose hydrogels. The results showed that directly using the pretreated sample without the washing step lowered the total hydrogel costs while preserving the lignosulfonate (LS) produced during pretreatment. The best tensile (54.1 kPa) and compressive (177.7 kPa) stresses were obtained for the hydrogel prepared from non-detoxified pretreated corncob at 165 °C (NCH-165). The sulfonic acid groups in LS could enhance the interaction between plant cellulose, thus improving its mechanical properties. The capacitor assembled from NCH-165 achieved an energy density of 236.1 Wh/kg at a power density of 499.7 W/kg and a high coulombic efficiency of more than 99 % after 2000 charge/discharge cycles. In conclusion, the present study simplifies the pathway for the preparation of flexible, conductive, and anti-freezing hydrogels by directly utilizing a non-detoxified bisulfite-pretreated corncob.

3.
Mar Pollut Bull ; 205: 116559, 2024 Aug.
Artículo en Inglés | MEDLINE | ID: mdl-38852202

RESUMEN

This study investigated the effect of hydraulic retention time (HRT) on the denitrification performance and microbial composition of reactors, packed with composite polycaprolactone and corncob carbon sources, during the treatment mariculture wastewater. The optimal HRT was 3 h, and average nitrogen removal efficiency was 99.00 %, 99.07 %, and 98.98 % in the HRT =3, 5, and 7 h groups, respectively. However, the 3 h group (DOC 2.91 mg/L) was the only group with a lower DOC concentration than that of the influent group (3.31 mg/L). Moreover, species richness was lower at HRT =3 h, with a greater proportion of denitrification-dominant phyla, such as Proteobacteria. The abundance of the NarG, NirK, and NirS functional genes suggested that the HRT =3 h group had a significant advantage in the nitrate and nitrite reduction phases. Under a short HRT, the composite carbon source achieved a good denitrification effect.


Asunto(s)
Reactores Biológicos , Desnitrificación , Poliésteres , Poliésteres/metabolismo , Zea mays , Microbiota , Aguas Residuales/química , Eliminación de Residuos Líquidos/métodos , Nitrógeno , Nitratos
4.
Food Chem ; 454: 139749, 2024 Oct 01.
Artículo en Inglés | MEDLINE | ID: mdl-38797104

RESUMEN

Plastic food packaging, with its harmful migration of microplastics and nanoplastics into food, presents significant ecological imbalance and human health risks. In this regard, using food and agricultural byproducts as packaging materials reduces environmental and economic concerns and supports their sustainable management. Herein, cellulosic residue from corncob was employed as a renewable source for developing biodegradable packaging films. It was solubilized in ZnCl2 solution, crosslinked with Ca2+ ions, and plasticized with sorbitol to form films and used to improve the shelf-life of raspberries. The optimized film possesses water vapor permeability, tensile strength, and elongation at break of 1.8(4) x10-10 g-1 s-1 Pa-1, 4.7(1) MPa, and 15.4(7)%, respectively. It displays UV-blocking and antioxidant properties and biodegrades within 29 days at 24% soil moisture. It preserves raspberries for 7 and 5 more days at room temperature and refrigeration conditions, respectively, compared to polystyrene film. Overall, more value addition could be envisioned from agricultural residues to minimize post-harvest losses and food waste through biodegradable packaging, which also aids in mitigating plastic perils.


Asunto(s)
Embalaje de Alimentos , Conservación de Alimentos , Rubus , Embalaje de Alimentos/instrumentación , Rubus/química , Conservación de Alimentos/métodos , Conservación de Alimentos/instrumentación , Permeabilidad , Resistencia a la Tracción , Plásticos Biodegradables/química , Biodegradación Ambiental , Frutas/química , Celulosa/química
5.
Sci Rep ; 14(1): 8131, 2024 Apr 07.
Artículo en Inglés | MEDLINE | ID: mdl-38584225

RESUMEN

Insufficient attention has been given to the recycling of excess urea despite its potential detrimental effects on soil nutrient equilibrium, geological structure, and crop health. In this study, corncob-derived porous biochar (CPB), which is rich in surface functional groups, was prepared from biomass corncob in two steps as an adsorbent to remove urea from wastewater. Compared with the typical carbonization and activation processes, this process resulted in a higher yield of CPB and an ultrahigh adsorption capacity for urea. Response surface analysis was utilized to determine the optimal carbonization conditions, which were found to be 500 °C for 6 h with a heating rate of 15 °C/min. The exceptional adsorption capability of CPB can be ascribed to its porous structure and significant presence of oxygen-containing functional groups, which facilitate a synergistic interaction of physisorption and chemisorption. This adsorption phenomenon aligns with the Harkins-Jura isotherm model and adheres to pseudo-second order kinetics. CPB demonstrates potential as an adsorbent for the elimination of urea from wastewater in an economical and effective fashion.

6.
Ecotoxicol Environ Saf ; 275: 116265, 2024 Apr 15.
Artículo en Inglés | MEDLINE | ID: mdl-38547730

RESUMEN

The utilization of gypsum and biomass in environmental remediation has become a novel approach to promote waste recycling. Generally, raw waste materials exhibit limited adsorption capacity for heavy metal ions (HMIs) and often result in poor solid-liquid separation. In this study, through co-pyrolysis with corncob waste, titanium gypsum (TiG) was transformed into magnetic adsorbents (GCx, where x denotes the proportion of corncob in the gypsum-corncob mixture) for the removal of Cd(II) and Pb(II). GC10, the optimal adsorbent, which was composed primarily of anhydrite, calcium sulfide, and magnetic Fe3O4, exhibited significantly faster adsorption kinetics (rate constant k1 was 218 times and 9 times of raw TiG for Cd(II) and Pb(II)) and higher adsorption capacity (Qe exceeded 200 mg/g for Cd(II) and 400 mg/g for Pb(II)) than raw TiG and previous adsorbents. Cd(II) removal was more profoundly inhibited in a Cd(II) + Pb(II) binary system, suggesting that GC10 showed better selectivity for Pb(II). Moreover, GC10 could be easily separated from purified water for further recovery, due to its high saturation magnetization value (6.3 emu/g). The superior removal capabilities of GC10 were due to adsorption and surface precipitation of metal sulfides and metal sulfates on the adsorbent surface. Overall, these waste-derived magnetic adsorbents provide a novel and sustainable approach to waste recycling and the deep purification of multiple HMIs.


Asunto(s)
Metales Pesados , Contaminantes Químicos del Agua , Cadmio/análisis , Sulfato de Calcio , Zea mays , Plomo , Contaminantes Químicos del Agua/análisis , Titanio , Adsorción , Fenómenos Magnéticos , Cinética
7.
Heliyon ; 10(6): e27767, 2024 Mar 30.
Artículo en Inglés | MEDLINE | ID: mdl-38515665

RESUMEN

This study investigated the efficient removal of cadmium ions from aqueous solutions using calcium oxide nanoparticles (CaO NPs) synthesized from waste hen eggshells using a Sol-gel method and supported on corncob bio-adsorbent. The synthesized CaO NPs were characterized using FT-IR, XRD, specific surface area, and TGA. Batch adsorption experiments were conducted to examine the influence of process parameters such as adsorbent dosages, initial Cd (II) concentrations, pH values, and contact times. XRD analysis revealed that the synthesized CaO nanoparticles had a size of 24.34 nm and a specific surface area of 77.4 m2/g. The optimal conditions for achieving the highest percent removal of cadmium (99.108%) were found to be an initial concentration of 55 ppm, pH 7, adsorbent dose of 0.75 g, and contact time of 50 min. The experimental removal efficiency closely matched the predicted value (99.0%), indicating the suitability of the method used in optimizing the removal of Cd (II) ions from aqueous solutions. These findings, corroborated by predicted values, underscore the efficacy of our method in optimizing cadmium removal. Based on these findings, it can be concluded that corncob-supported CaO NPs are optimized for their highest efficiency and hold great promise as a cost-effective and environmentally friendly solution for wastewater treatment with a focus on cadmium removal.

8.
Brain Neurosci Adv ; 8: 23982128241238934, 2024.
Artículo en Inglés | MEDLINE | ID: mdl-38516557

RESUMEN

Ischaemic stroke presents a significant problem worldwide with no neuroprotective drugs available. Many of the failures in the search for neuroprotectants are attributed to failure to translate from pre-clinical models to humans, which has been combatted with rigorous pre-clinical stroke research guidelines. Here, we present post hoc analysis of a pre-clinical stroke trial, conducted using intraluminal filament transient middle cerebral artery occlusion in the stroke-prone spontaneously hypertensive rat, whereby unscheduled changes were implemented in the animal housing facility. These changes severely impacted body weight post-stroke resulting in a change from the typical body weight of 90.6% of pre-surgery weight post-stroke, to on average 80.5% of pre-surgery weight post-stroke. The changes also appeared to impact post-stroke blood pressure, with an increase from 215.4 to 240.3 mmHg between housing groups, and functional outcome post-stroke, with a 38% increased latency to contact in the sticky label test. These data highlight the importance of tightly controlled housing conditions when using physiological or behavioural measurements as a primary outcome.

9.
Environ Sci Pollut Res Int ; 31(11): 16653-16666, 2024 Mar.
Artículo en Inglés | MEDLINE | ID: mdl-38319417

RESUMEN

A key factor restricting the application of biochar in the steel industry is its high-quality upgrading. This paper evaluated the characteristics of hydrochar produced by HTC (hydrothermal carbonization) process of corncob to be used as a solid fuel. HTC temperatures (240-300 °C) and HTC water-reused times (1-3 times) were examined for their effects on hydrochar yield, physicochemical characteristics, and combustion properties. The results showed hydrochar yields, O/C, and H/C parameters decreased as HTC temperature and water-reused times increased, while its high heating value increased. Due to dehydration and decarboxylation, hydrochar showed similar characteristics to those in bituminous coal. The removal efficiency of alkali metal K reached 99% after HTC treatment. Carbonaceous hydrochar had become more compact, orderly, and stable with increasing amounts of aromatic functional groups, C = C, and C = O. Hydrochar, as a biofuel, has higher ignition energy and is more stable than corncob due to its high carbonaceous order degree. To calculate combustion kinetic parameters, the Kissinger-Akahira-Sunose (KAS) and Flynn-Wall-Ozawa (FWO) methods were applied. The results revealed that Eα (average activation energy) was quite similar between the two models. HC-300 had an Eα of 262 kJ/mol. HTC could be an efficient way to reutilize corncob biomass into clean biofuels with high calorific value.


Asunto(s)
Carbono , Zea mays , Carbono/química , Temperatura , Biomasa , Biocombustibles , Agua
10.
Saudi J Biol Sci ; 31(4): 103947, 2024 Apr.
Artículo en Inglés | MEDLINE | ID: mdl-38371876

RESUMEN

The production of corn generates a substantial amount of agro-industrial waste, with corncob accounting for a significant portion of this waste. In this study, we focused on utilizing corncob as a carbon source and inducer to simultaneously produce two valuable industrial enzymes, protease, and xylanase, using a recombinant strain of B. halodurans CM1. Interestingly, xylan-rich corncob not only enhanced the xylanase activity but also induced protease activity of the modified B. halodurans CM1 strain. The effect of corncob concentration on the coproduction of protease and xylanase was investigated. Corncob with 6 % concentration induced protease activity of 1020.7 U/mL and xylanase activity of 502.8 U/mL in a 7 L bioreactor under the condition of 1 vvm aeration, 250 rpm agitation, 37 °C temperature, initial pH 9.0, and 40 h incubation period. The protease produced was an alkalothermophilic enzyme whose highest activity was at pH 12 and 50 °C, and it belonged to a serine protease family. This alkalothermophilic protease's activity to some degree was reduced by Co2+, Mg2+, Fe2+, Zn2+, and K+, but enhanced by Ca2+ and Ni2+ (at 5 mM). The protease was stable even under the presence of a 15 % concentration of acetone, DMSO, ethanol, and isopropyl alcohol. The protease activity at 30 °C was not considerably changed by the presence of detergent, indicating excellent potential as a washing detergent additive. According to these findings, corncob has the potential to be a substrate for the coproduction of protease and xylanase, which have a wide range of industrial uses.

11.
Sci Rep ; 14(1): 4540, 2024 Feb 24.
Artículo en Inglés | MEDLINE | ID: mdl-38402247

RESUMEN

Hydrogel from corncob cellulose was synthesized in this investigation. The synthesized Hydrogel was characterized by SEM, XRD, and FTIR instruments. As the results indicate the synthesized hydrogel has required and important features, these suggest the suitability of hydrogel for the adsorption of methylene blue dye (MBD). Three important process variables (dosage, contact time, and initial concentration) with three levels were studied during the adsorption process at 30 °C and neutral pH. The efficiency of hydrogel for adsorption of MBD was determined in each experiment. The experimental results were statistically analyzed and interpreted. The maximum removal efficiency was achieved at 2.22 g/L of dosage, 80.36 min of contact time, and 74.54 mg/L of initial concentration. At this condition, 98.25% of MBD was achieved through experimental tests. Kinetics, isotherm, and thermodynamics studies were performed. Langmuir isotherm is more suitable to describe the adsorption process and the Pseudo second-order kinetic model fits this process. From the thermodynamics studies, all negative values of change in Gibbs free energy (ΔG°), and positive value of change in enthalpy (ΔH°), and change in entropy (ΔS°) indicate that the carried out experimental process is a spontaneous and endothermic. Moreover, the regeneration experiment for adsorbent was performed. The treatment of real textile industry waste water was conducted and the removal efficiency of hydrogel was 64.76%. This removal percentage reduction from sythetic aqueous solution is due to involvement of other pollutants in the real waste water. The synthesized hydrogel adsorbent is suitable up to the third cycle without significant loss in removal efficiency.

12.
Environ Res ; 248: 118333, 2024 May 01.
Artículo en Inglés | MEDLINE | ID: mdl-38295977

RESUMEN

The short-term composting based on corncob for preparing Pleurotus ostreatus cultivation medium originated from agricultural production practices and so lacked systematic investigation. In this study, the influences of a Dafen (15 mm, DFT) and Xiaofen (5 mm, XFT) initial particle size (IPS) of corncob on the microbial succession and compost quality were examined. Results demonstrated that XFT compost was better suited for mushroom cultivation due to its high biological efficiency of 70 % and the absence of contamination. The composting microbes differed significantly between the DFT and XFT composts. During composting, the genera of Bacillus, Acinetobacter, Lactobacillus, Streptomyces, and Paenibacillus were majorly found in the DFT compost, while Acinetobacter, Lactobacillus, Puccinia, Bacteroides, and Bacillus genera dominated the XFT compost. Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis showed that throughout the thermophilic phase, XFT compost had much greater relative abundances of sequences relevant to energy, carbohydrate, and amino acid metabolism than DFT compost. Analysis of network correlations and Mantel tests indicated that IPS reduction could increase microbial interactions. Overall, adjusting the IPS of corncob to 5 mm increased microbial interactions, improved compost quality, and thereby boosted the P. ostreatus yield. These findings will be pertinent in optimizing the composting process of cultivation medium for P. ostreatus.


Asunto(s)
Compostaje , Pleurotus , Zea mays , Tamaño de la Partícula , Agricultura/métodos , Suelo
13.
Appl Microbiol Biotechnol ; 108(1): 13, 2024 Dec.
Artículo en Inglés | MEDLINE | ID: mdl-38170309

RESUMEN

The cellulose-rich corncob residue (CCR) is an abundant and renewable agricultural biomass that has been under-exploited. In this study, two strategies were compared for their ability to transform CCR into cello-oligosaccharides (COS). The first strategy employed the use of endo-glucanases. Although selected endo-glucanases from GH9, GH12, GH45, and GH131 could release COS with degrees of polymerization from 2 to 4, the degrading efficiency was low. For the second strategy, first, CCR was efficiently depolymerized to glucose and cellobiose using the cellulase from Trichoderma reesei. Then, using these simple sugars and sucrose as the starting materials, phosphorylases from different microorganisms were combined to generate COS to a level up to 100.3 g/L with different patterns and degrees of polymerization. Using tomato as a model plant, the representative COS obtained from BaSP (a sucrose phosphorylase from Bifidobacterium adolescens), CuCbP (a cellobiose phosphorylase from Cellulomonas uda), and CcCdP (a cellodextrin phosphorylase from Clostridium cellulosi) were shown to be able to promote plant growth. The current study pointed to an approach to make use of CCR for production of the value-added COS. KEY POINTS: • Sequential use of cellulase and phosphorylases effectively generated cello-oligosaccharides from corncob residue. • Cello-oligosaccharides patterns varied in accordance to cellobiose/cellodextrin phosphorylases. • Spraying cello-oligosaccharides promoted tomato growth.


Asunto(s)
Celobiosa , Celulasa , Zea mays , Oligosacáridos/química , Fosforilasas
14.
Chemosphere ; 350: 141030, 2024 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-38154668

RESUMEN

Corncob (CC) based solar evaporators were employed to desalinize seawater brought from the Vallarta coast in Mexico. The pure CC produced an evaporation-rate and evaporation-efficiency of 0.63 kg m-2 h-1 and 38.4%, respectively, under natural solar light. Later, the CC was coated with carbonized CC (CCCE evaporator) or was coated with graphene (CCGE evaporator). Those evaporators were used for the desalination of seawater and obtained higher evaporation rates of 1.59-1.67 kg m-2 h-1, and higher evaporation efficiencies of 92-94% (under natural solar light). The desalination experiments were repeated under artificial solar light and the evaporation-rates/evaporation-efficiencies slightly decreased to 1.43-1.52 kg m-2 h-1/88-92%. The surface analysis of the evaporators by FTIR, XPS and Raman revealed that the CCGE evaporator had on its surface a lower content of defects and a higher amount of OH groups than the CCCE evaporator. Therefore, the CCGE evaporator had higher evaporation-rates/evaporation-efficiencies in comparison with the CCCE evaporator. Furthermore, we purified water contaminated with three different herbicides (fomesafen, 2-6 dichlorobenzamide and 4-chlorophenol at 30 ppm) by evaporation and using natural solar light. Interestingly, the CCCE and CCGE evaporators also removed the herbicides by physical adsorption with efficiencies of 12-22.5%. Moreover, the CCGE evaporator removed vegetable oil from contaminated water by adsorption and its maximum adsorption capacity was 1.72 g/g. Overall, our results demonstrated that the corncob-based evaporators studied here are a low-cost alternative to obtain clean water under natural solar light and this one was more effective for the desalination of seawater than the artificial sunlight (Xe lamp).


Asunto(s)
Herbicidas , Zea mays , Agua de Mar , Agua , Luz Solar
15.
Artículo en Inglés | MEDLINE | ID: mdl-38157156

RESUMEN

Xylooligosaccharides (XOS), as prebiotic oligomers, are increasingly receiving attention as high value-added products produced from lignocellulosic biomass. Although the XOS contains a series of different degrees of polymerization (DP) of xylose units, DP 2 and 3 (xylobiose (X2) and xylotriose (X3)) are regarded as the main active components in food and pharmaceutical fields. Therefore, in the study, in order to achieve the maximum production of XOS with the desired DP, a combination strategy of sequential auto-hydrolysis and xylanase hydrolysis was developed with corncob as raw material. The evidences showed that the hemicellulosic xylan could be effectively decomposed into various higher DP saccharides (> 4), which were dissolved into the auto-hydrolysate; sequentially, the soluble saccharides could be rapidly hydrolyzed into XOS with desired DP by xylanase hydrolysis. Finally, a maximum XOS yield of 56.3% was achieved and the ratio of (X2 + X3)/XOS was over 80%; meanwhile, the by-products could be controlled at lower levels. Overall, this study provides solid data that support the selective and precise preparation of XOS from corncob, vigorously promoting the application of XOS as functional sugar products.

16.
J Agric Food Chem ; 2023 Nov 03.
Artículo en Inglés | MEDLINE | ID: mdl-37921650

RESUMEN

The bioproduction of xylitol from hemicellulose hydrolysate has good potential for industrial development. However, xylitol productivity has always been limited due to corncob hydrolysate toxicity and glucose catabolic repression. To address these challenges, this work selected the S83 and S128 amino acid residues of the cyclic AMP receptor protein (CRP) as the modification target. By introducing multisite mutation in CRP, this approach successfully enhanced xylose catabolism and improved the strain's tolerance to corncob hydrolysate. The resulting mutant strain, designated as CPH (CRP S83H-S128P), underwent fermentation in a 20 L bioreactor with semicontinuous feeding of corncob hydrolysate. Remarkably, xylitol yield and xylitol productivity for 41 h fermentation were 175 and 4.32 g/L/h, respectively. Therefore, multisite CRP mutation was demonstrated as an efficient global regulatory strategy to effectively improve xylitol productivity from lime-pretreated corncob hydrolysates.

17.
Molecules ; 28(21)2023 Nov 03.
Artículo en Inglés | MEDLINE | ID: mdl-37959837

RESUMEN

Biomass exploitation is a global trend due to the circular economy and the environmentally friendly spirit. Numerous applications are now based on the use of biomass-derived products. Hydrogen sulfide (H2S) is a highly toxic and environmentally hazardous gas which is emitted from various processes. Thus, the efficient removal of this toxic hazardous gas following cost-effective processes is an essential requirement. In this study, we present the synthesis and characterization of biomass-derived activated carbon/zinc oxide (ZnO@AC) composites from different biomass sources as potential candidates for H2S sorption. The synthesis involved a facile method for activated carbon production via pyrolysis and chemical activation of biomass precursors (spent coffee, Aloe-Vera waste leaves, and corncob). Activated carbon production was followed by the incorporation of zinc oxide nanoparticles into the porous carbon matrix using a simple melt impregnation method. The synthesized ZnO@AC composites were characterized using X-ray diffraction (XRD), infrared spectroscopy (IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and nitrogen porosimetry. The H2S removal performance of the ZnO@AC composites was evaluated through sorption experiments using a handmade apparatus. Our findings demonstrate that the Aloe-Vera-, spent coffee-, and corncob-derived composites exhibit superior H2S sorption capacity up to 106 mgH2S/gads., 66 mgH2S/gads., and 47 mgH2S/gads., respectively.

18.
Ultrason Sonochem ; 101: 106683, 2023 Dec.
Artículo en Inglés | MEDLINE | ID: mdl-37948893

RESUMEN

In this study, we aimed to investigate the impact of various ultrasound durations on the structure and bioactivity of sweet corncob polysaccharides treated with ultrasound-assisted degradation using hydrogen peroxide and ascorbic acid (H2O2-Vc). We subjected sweet corncob polysaccharides to ultrasound treatment for 0, 30, 60, and 90 min alongside the H2O2-Vc method. We then analyzed their chemical composition and structure. Additionally, we administered these polysaccharides to mice with type 2 diabetes (T2DM) through gavage at a dosage of 200 mg/kg/day. The results indicated a significant reduction in the molecular weight of the degraded sweet corncob polysaccharides, while their composition remained relatively stable. However, the basic structure of the polysaccharides was retained. In vivo experiments demonstrated that ultrasound-assisted degradation of these polysaccharides had a positive impact on T2DM, particularly the 60-minute ultrasound treatment (UH-DSCBP-60 min), which effectively controlled blood glucose levels by regulating glycolipid metabolism in the livers of mice with T2DM. This approach also reduced inflammation and oxidative stress levels and inhibited disaccharide activity in the small intestine. We demonstrated that ultrasound can positively affect the sweet corncob polysaccharides hypoglycemic activity. The findings of our study provide a theoretical foundation for the valuable utilization of sweet corncob polysaccharides.


Asunto(s)
Ácido Ascórbico , Diabetes Mellitus Tipo 2 , Animales , Ratones , Ácido Ascórbico/química , Diabetes Mellitus Tipo 2/tratamiento farmacológico , Peróxido de Hidrógeno/química , Zea mays/química , Polisacáridos/química
19.
Microb Cell Fact ; 22(1): 201, 2023 Oct 06.
Artículo en Inglés | MEDLINE | ID: mdl-37803395

RESUMEN

BACKGROUND: Xylitol has a wide range of applications in the pharmaceuticals, cosmetic, food and beverage industry. Microbial xylitol production reduces the risk of contamination and is considered as environment friendly and sustainable compared to the chemical method. In this study, random mutagenesis and genetic engineering approaches were employed to develop Candida tropicalis strains with reduced xylitol dehydrogenase (XDH) activity to eliminate co-substrate requirement for corn cob-based xylitol-ethanol biorefinery. RESULTS: The results suggest that when pure xylose (10% w/v) was fermented in bioreactor, the Ethyl methane sulfonate (EMS) mutated strain (C. tropicalis K2M) showed 9.2% and XYL2 heterozygous (XYL2/xyl2Δ::FRT) strain (C. tropicalis K21D) showed 16% improvement in xylitol production compared to parental strain (C. tropicalis K2). Furthermore, 1.5-fold improvement (88.62 g/L to 132 g/L) in xylitol production was achieved by C. tropicalis K21D after Response Surface Methodology (RSM) and one factor at a time (OFAT) applied for media component optimization. Finally, corncob hydrolysate was tested for xylitol production in biorefinery mode, which leads to the production of 32.6 g/L xylitol from hemicellulosic fraction, 32.0 g/L ethanol from cellulosic fraction and 13.0 g/L animal feed. CONCLUSIONS: This work, for the first time, illustrates the potential of C. tropicalis K21D as a microbial cell factory for efficient production of xylitol and ethanol via an integrated biorefinery framework by utilising lignocellulosic biomass with minimum waste generation.


Asunto(s)
Candida tropicalis , Xilitol , Candida tropicalis/genética , Zea mays , Fermentación , Etanol , Hidrólisis , Xilosa
20.
Bioresour Technol ; 390: 129895, 2023 Dec.
Artículo en Inglés | MEDLINE | ID: mdl-37863335

RESUMEN

High-solids enzymatic hydrolysis for biomass has currently received considerable interest. However, the solid effect during the process limits its economic feasibility. This work presented an ordered polyethylene glycol (PEG) pre-incubated strategy for enhancing the auxiliary effect of PEG in a high-solids enzymatic hydrolysis system. The substrate and enzyme were separately pre-incubated with PEG in this strategy. The ordered PEG pre-incubated strategies yielded a maximum glucose concentration of 166.6 g/L from 32 % (w/v) pretreated corncob with an enzymatic yield of 94.1 % by 72 h hydrolysis. Using this method, PEG not only lessened the lignin adsorption to cellulase but also altered particle rheological characteristics in the high-solids enzymatic hydrolysis system as a viscosity modifier. This study offered a new insight into the mechanism behind the PEG synergistic effect and would make it possible to achieve efficient high-solids loading hydrolysis in the commercial manufacture of cellulosic ethanol.


Asunto(s)
Celulasa , Lignina , Lignina/química , Polietilenglicoles/química , Hidrólisis , Adsorción , Celulasa/química
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...