Sub-okra leaf shape conferred via chromosomal introgression from Gossypium barbadense L. improves photosynthetic productivity in short-season cotton (Gossypium hirsutum L.).

Leaf shape is a vital agronomic trait that affects plant and canopy architecture, yield, and other production attributes of upland cotton. Compared with normal leaves, lobed leaves have potential advantages in improving canopy structure and increasing cotton yield. A chromosomal introgression segment from Gossypium barbadense L. conferring sub-okra leaf shape to Gossypium hirsutum L. was identified on chromosome D01. To determine the effects of this transferred sub-okra leaf shape on the leaf anatomical characteristics, photosynthesis-related traits, and yield of short-season cotton, we performed a field experiment with three sets of near-isogenic lines carrying okra, sub-okra, and normal leaf shape in Lu54 (L54) and Shizao 2 (SZ2) backgrounds. Compared with normal leaves, sub-okra leaves exhibited reduced leaf thickness and smaller leaf mass per area; moreover, the deeper lobes of sub-okra leaves improved the plant canopy structure by decreasing leaf area index by 11.24%-22.84%. Similarly, the intercepted PAR rate of lines with sub-okra leaf shape was also reduced. The chlorophyll content of sub-okra leaves was lower than that of okra and normal leaf shapes; however, the net photosynthetic rate of sub-okra leaves was 8.17%-29.81% higher than that of other leaf shapes at most growth stages. Although the biomass of lines with sub-okra leaf shape was less than that of lines with normal leaves, the average first harvest yield and total yield of lines with the sub-okra leaf shape increased by 6.36% and 5.72%, respectively, compared with those with normal leaves. Thus, improvements in the canopy structure and photosynthetic and physiological characteristics contributed to optimizing the light environment, thereby increasing the yield of lines with sub-okra leaf shape. Our results suggest that the sub-okra leaf trait from G. barbadense L. may have practical applications for cultivating short-season varieties with high photosynthetic efficiency, and improving yield, which will be advantageous for short-season varieties.

Evaluation of comfort gloves made of semipermeable and textile materials in patients with hand dermatoses: Results of a controlled multicenter intervention study (ProTection II).

BACKGROUND: Comfort gloves are used in the management of hand dermatoses. OBJECTIVES: To compare the acceptance and tolerability of comfort gloves made of different materials in patients with hand dermatoses and their effects on skin lesions. METHODS: In a prospective multicenter study, 284 patients with hand dermatoses were invited to wear either a cotton glove (COT) or a semipermeable Sympatex glove underneath a cotton glove (SYM/COT) for two subsequent phases of 19 consecutive nights each. A total of 88 controls were asked not to wear any comfort gloves overnight. The severity of skin lesions over time was examined. Questionnaires were used to assess health-related quality of life (HRQoL) and acceptance and tolerability of the gloves. RESULTS: The hand dermatoses improved in all groups. No substantial intergroup differences regarding severity and HRQoL were observed. SYM/COT received better ratings regarding climate conditions and tactility while COT showed superiority in fit, wearing comfort, and practicality. CONCLUSIONS: We confirmed that SYM/COT and COT are well tolerated and accepted suggesting that SYM/COT is a good alternative for COT as comfort gloves in patients with hand dermatoses. Individual requirements, needs, and preferences may direct the material choice.

Pioneering Nit Gene Exploitation to Develop Molecular Diagnostic Assay for Rapid Detection of Cotton Root Rot Incitant, Macrophomina phaseolina (Tassi) Goid, in Field Soil.

Cotton root rot caused by Macrophomina phaseolina pose a significant threat to cotton production, leading to substantial yield and quality losses. Early and accurate diagnosis of this pathogen in soil is crucial for effective disease management. This study presents a pioneering investigation into the utilization of the nit gene encoding nitrilase for the development of a molecular diagnostic assay aimed at the rapid detection of M. phaseolina in field soils. The methodology involved the design and validation of primers targeting the Nit gene sequence, followed by the optimization of PCR conditions for efficient amplification. Leveraging state-of-the-art molecular techniques, the assay offers a novel protocol to accurately identify the presence of M. phaseolina in soil with high sensitivity and specificity. The specificity of the designed primers was confirmed through PCR amplification using DNA from M. phaseolina and other related fungi. Sensitivity tests demonstrated that the PCR assay reliably detected M. phaseolina DNA at concentrations as low as 1 ng. Furthermore, the performance of the diagnostic assay was rigorously evaluated using field soil samples with a known status of M. phaseolina infection, demonstrating its reliability and efficacy in real-world scenarios. This study introduces a novel molecular marker for the detection of M. phaseolina and offers a rapid and efficient means for screening M. phaseolina in large soil samples with minimal time and manpower.

Genetic diversity of Cotton leafroll dwarf virus from the Southwestern United States, and its implications for the multi-introduction event hypothesis and future evolution.

Cotton leafroll dwarf virus (CLRDV) is a viral agent recently identified in the United States (US) in 2017 in Alabama. Since its identification, CLRDV has spread to every cotton-growing state east of New Mexico. Oklahoma, Kansas, and Texas comprise the westernmost border of reported CLRDV incidence, making monitoring of these states vital for proper control. Additionally, as the virus evolves, mutations that alter symptomology, such as mutations in the F-box-like motif in ORF0/P0, may occur and need to be monitored thoroughly during the growing seasons. Using High-throughput sequencing (HTS) and PCR-derived Sanger sequencing, four CLRDV genomes and 21 P0 gene isolates were sequenced from Oklahoma, Kansas, and Texas from 2019 to 2021 to determine the genetic diversity among CLRDV isolates. Phylogenetic analyses of the complete genomes revealed seven clades while ORF0 gene analyses resulted in large polytomic clusters. BEAST analyses of the 114 total P0 sequences from GenBank, downloaded before 2024, revealed a lower mean substitution rate than previously reported as well as an earlier root year (1914). In addition, using all available CLRDV genome sequences, 11 likely recombination events were determined. Examination of the P0 amino acid sequences revealed 13 mutations unique to the isolates collected in this study. Based on the phylogenetic and amino acid analyses, the CLRDV isolates from Texas (TX clade) may represent evidence for the multi-introduction event hypothesis into the US. Additionally, based on our analyses in this study, we propose the Asian CLRDV isolates should be constituted as a potentially separate strain of CLRDV.

In-situ polymerization of phosphorus/nitrogen flame-retardant coating for polyester/cotton blend fabrics with superior durability.

The durable flame-retardant functional coating of polyester/cotton (T/C) blend fabrics is both interesting and challenging. In this study, a novel in-situ polymerization strategy for phosphorus/nitrogen-based flame-retardant on T/C blend samples was developed through the polycondensation of tetramethylolphosphonium sulfate, dicyandiamide, and anionic cyclic phosphate ester. The chemical structure of the polycondensation compounds, as well as the surface morphology, combustion behavior, flame-retardant capacity, washing durability and flame-retardant mechanism of the coated T/C blend fabrics, were investigated. The coated T/C blend fabrics demonstrated excellent self-extinguishing performance, with the damaged length decreasing to as low as 8.0 cm and the LOI reaching 28 %. Moreover, the peak heat release rate of the coated T/C blend fabrics decreased by 39.7 %. The superior flame retardancy can be attributed to the enhanced dehydration and carbonization by phosphate groups in the condensed phase, as well as the quenching effect and diluting effect in the gas phase. Additionally, the coated T/C blend fabrics exhibited remarkable washing durability and still achieved self-extinguishing after 65 washing cycles, and the in-situ deposition of insoluble three-dimensional polycondensation compounds onto the T/C blend fabrics was beneficial. The flame-retardant coating had a minor impact on the whiteness, tensile strength and breathability of the T/C blend fabrics.

Deleting an xylosidase-encoding gene VdxyL3 increases growth and pathogenicity of Verticillium dahlia.

Introduction: Verticillium dahliae causes a devastating Verticillium wilt disease on hundreds of plant species worldwide, including cotton. Understanding the interaction mechanism between V. dahliae and its hosts is the prerequisite for developing effective strategies for disease prevention. Methods: Here, based on the previous observation of an xylosidase-encoding gene (VdxyL3) in V. dahliae being obviously up-regulated after sensing root exudates from a cotton variety susceptible to this pathogen, we investigated the function of VdxyL3 in the growth and pathogenesis of V. dahliae by generating its deletion-mutant strains (ΔVdxyL3). Results: Deleting VdxyL3 led to increased colony expansion rate, conidial production, mycelial growth, carbon and nitrogen utilization capacities, and enhanced stress tolerance and pathogenicity of V. dahliae. VdxyL3 is a secretory protein; however, VdxyL3 failed to induce cell death in N. benthamiana based on transient expression experiment. Transcriptomic analysis identified 1300 genes differentially expressed (DEGs) between wild-type (Vd952) and ΔVdxyL3 during infection, including 348 DEGs encoding secretory proteins, among which contained 122 classical secreted proteins and 226 non-classical secreted proteins. It was notable that of the 122 classical secretory proteins, 50 were carbohydrate-active enzymes (CAZymes) and 58 were small cysteine rich proteins (SCRPs), which were required for the pathogenicity of V. dahliae. Conclusion: The RNA-seq data thus potentially connected the genes encoding these proteins to the pathogenesis of V. dahliae. This study provides an experimental basis for further studies on the interaction between V. dahliae and cotton and the pathogenic mechanism of the fungus.

ZnO Nanoparticles Enhance the Antimicrobial Properties of Two-Sided-Coated Cotton Textile.

Cotton textiles improved with metal oxide nanoparticles acquire additional features that may enhance their action against antimicrobial-resistant pathogens due to the unique properties and characteristics of the nanoparticles. The main objective of this work is to evaluate the antimicrobial features of two-sided-coated cotton textiles with ZnO nanoparticles. Nanoparticles were deposited using green chemistry technology with low-temperature oxygen plasma. ZnO particles formed stable structures on textile fibers. The optimal deposition parameters (150 W plasma power, 120 min immersion time) achieved the best effects against Gram-negative and Gram-positive bacteria and microscopic fungi. Two-sided-coated cotton with ZnO nanoparticles showed high antibacterial action on Gram-negative and Gram-positive bacteria. Modification with zinc oxide inhibited the growth of Candida albicans by more than half.

Impacts of parental genomic divergence in non-syntenic regions on cotton heterosis.

INTRODUCTION: Heterosis has revolutionized crop breeding, enhancing global agricultural production. However, the mechanisms underlying heterosis remain obscure. Xiangzamian 2# (XZM2), a super hybrid upland cotton (Gossypium hirsutum L.) characterized by high-yield heterosis, has been developed and extensively planted in China. OBJECTIVES: We conducted a systematic analysis of CRI12 and J8891, two parents of XZM2. We aimed to reveal the precise genetic information and the role of non-syntenic divergence in shaping heterosis, laying a foundation for advancing understanding of heterosis. METHODS: We de novo assembled high-quality genomes of CRI12 and J8891, and further uncovered abundant genetic variations and non-syntenic regions between the parents. Whole-genome comparison, association analysis, transcriptomic analysis and relative identity-by-descent (rIBD) estimation were conducted to identify structural variations (SVs) and introgressions within non-syntenic blocks and to analyze their impacts on promoting heterosis. RESULTS: Parental genetic divergence increased in non-syntenic regions. Furthermore, these regions, accounting for only 16.71% of the total genome, contained more loci with significantly higher heterotic effects, far exceeding the syntenic background. SVs covered 97.26% of non-syntenic sequences and caused widespread gene expression differences in these regions, driving dynamic complementation of gene expression in the hybrid. A set of SVs were responsible for trait improvement and had positive effects on heterosis, contributing larger heritability than short variations. We characterized numerous parental-specific introgressions from G. barbadense. Specifically, a functional introgression segment within non-syntenic blocks introduced an elite haplotype, which significantly increased lint yield and enhanced heterosis. CONCLUSION: Our study clarified non-syntenic regions to harbor more loci with higher heterotic effects, revealed their importance in promoting heterosis and supported the crucial role of genetic complementation in heterosis. SVs and introgressions were identified as key factors responsible for non-syntenic divergence between the parents. They had important effects on gene expression and trait improvement, positively contributing to heterosis.

How photosynthetic performance impacts agricultural productivity in hybrid cotton offspring.

Currently, heterosis is an effective method for achieving high crop quality and yield worldwide. Owing to the challenges of breeding and the high cost of the F1 generation, the F2 generation is considered the more desirable hybrid offspring for agricultural production. The use of OJIP fluorescence provides rapid insights into various photosynthetic mechanisms. However, OJIP fluorescence has not been previously studied as an indicator of the rate of heterosis. Consequently, we investigated the relationship between photosynthetic characteristics and growth and developmental parameters in hybrid cotton cultivars. The findings showed a gradual decline in the photosynthetic performance of hybrid cotton as the number of generations increased. In comparison to the F3 generation, both the F1 and F2 generations showed minimal variations in parameters, thus maintaining hybrid dominant and emphasizing the agricultural production potential of the F2 generation. The JIP-test revealed significant differences in the relationship between ψ Eo and ϕ Eo parameters, as well as variations in the connections between the photo-response center and electron transfer efficiency, and between cotton yield and fiber quality in the hybrid progeny. These variations can serve as indicators for predicting the extent of hybrid dominance in cotton. The results indicated significant differences in the light and dark responses of the hybrid offspring. By using parents with similar photosynthetic performance as genetic resources for crossbreeding, the photosynthetic capacity of the hybrid progeny can be enhanced to facilitate the efficient absorption and conversion of light energy in crops.

Enhancing flame retardancy and multi-functionalization of environmentally friendly cotton fabrics with a polydimethylsiloxane-based polyurethane.

Phosphorus-containing flame retardants are prone to result in the buildup of biotoxins, while halogen flame retardants easily lead to hazardous gases. Therefore, it is crucial to develop a multifunctional flame-retardant cotton fabric without phosphorus and halogen. Herein, single-ended hydroxy-terminated polydimethylsiloxane (PDMS-ID) was synthesized through single-ended hydrosilicone oil and 1,4-butanediol, followed by the preparation of a waterborne polyurethane (RWPU) containing side chain polydimethylsiloxane through the reaction of PDMS-ID with isocyanate prepolymer. Characterization data shows that its particle size distribution is relatively dispersed while maintaining good emulsification performance. Based on this, a halogen-free and phosphorus-free multifunctional flame retardant cotton fabric (COF-BBN@RWPU) was successfully prepared through treatment with boric acid/borax/3-aminopropyltriethoxysilane solution and subsequent RWPU encapsulation. In vertical flammability test (VFT), COF-BBN@RWPU has a char length of 57 mm and a limiting oxygen index (LOI) of 42.3 % with a 11 % weight gain while pure cotton was burned through with a LOI of 18.0 %. In addition, the total heat release and total smoke release of COF-BBN@RWPU decreased by 80.0 % and 47.2 %, compared with pure cotton. Additionally, COF-BBN@RWPU can achieve a maximum contact angle of 140.1° with an oil-water separation rate of 98.4 %. This study presents an eco-friendly approach to achieving the multifunctionality of cellulose fabrics.

Sugar beet (Beta vulgaris L.) leaves as natural colorant for cotton dyeing using an ecofriendly approach toward industrial progress.

In the industrial sector, vegetable residual materials have received attention in the production of bio-colorant for textile dyeing. The current research endeavor is centered on investigating the possibility of using sugar beet leaves as a natural source of dye for the purpose of dyeing cotton fabrics. Different extraction methods were utilized to isolate the bio-colorant present in sugar beet residual material, and the most favorable colorant yield was obtained using a 5% methanolic KOH solution. For optimal dyeing results, the cotton fabric performed dyeing for a duration of 45 min at a temperature of 60 °C, using a salt solution concentration of 6 g/100 mL and 50 mL of the extracted dye solution. Characterization of dye using Fourier transform infrared spectroscopy analysis confirmed the presence of quercetin in the leaf extract. For the creation of a range of color variations, mordants that were chemical in nature, such as tannic acid, iron sulfate, potassium dichromate, and copper sulfate, as well as mordants that were bio-based, such as onion peel, pomegranate peel, henna, golden shower bark, and turmeric, were employed in harmony. In comparison, the utilization of bio-mordants resulted in darker shades that exhibited enhanced color intensity and superior color fastness properties with the value of 4-5 for wash, 4 for wet rubbing, 4-5 for dry rubbing, and 4-5 for light. The findings of this study hold significant value in terms of ecofriendly waste management and contribute to advancements in the industrial sector by utilizing waste residual materials as a natural source of colorants.

Ontogenic stage-associated SA response contributes to leaf age-dependent resistance in Arabidopsis and cotton.

Introduction: As leaves grow, they transition from a low-microbe environment embedded in shoot apex to a more complex one exposed to phyllosphere microbiomes. Such change requires a coordinated reprogramming of cellular responses to biotic stresses. It remains unclear how plants shift from fast growth to robust resistance during organ development. Results: Here, we reported that salicylic acid (SA) accumulation and response were temporarily increased during leaf maturation in herbaceous annual Arabidopsis. Leaf primordia undergoing active cell division were insensitive to the elicitor-induced SA response. This age-dependent increase in SA response was not due to prolonged exposure to environmental microbes. Autoimmune mutants with elevated SA levels did not alter the temporal pattern dependent on ontogenic stage. Young Arabidopsis leaves were more susceptible than mature leaves to Pseudomonas syringae pv. tomato (Pto) DC3000 cor- infection. Finally, we showed a broadly similar pattern in cotton, a woody perennial, where young leaves with reduced SA signaling were preferentially invaded by a Xanthomonas pathogen after leaf surface infection. Discussion: Through this work, we provided insights in the SA-mediated ontogenic resistance in Arabidopsis and tomato.

Green Synthesis of Cobalt-Doped CeFe2O5 Nanocomposites Using Waste Gossypium arboreum L. Stalks and Their Application in the Removal of Toxic Water Pollutants.

Currently, there is an increasing need to find new ways to purify water by eliminating bacterial biofilms, textile dyes, and toxic water pollutants. These contaminants pose significant risks to both human health and the environment. To address this issue, in this study, we have developed an eco-friendly approach that involves synthesizing a cobalt-doped cerium iron oxide (CCIO) nanocomposite (NC) using an aqueous extract of Gossypium arboreum L. stalks. The resulting nanoparticles can be used to effectively purify water and tackle the challenges associated with these harmful pollutants. Nanoparticles excel in water pollutant removal by providing a high surface area for efficient adsorption, versatile design for the simultaneous removal of multiple contaminants, catalytic properties for organic pollutant degradation, and magnetic features for easy separation, offering cost-effective and sustainable water treatment solutions. A CCIO nanocomposite was synthesized via a green co-precipitation method utilizing biomolecules and co-enzymes extracted from the aqueous solution of Gossypium arboreum L. stalk. This single-step synthesis process was accomplished within a 5-h reaction period. Furthermore, the synthesis of nanocomposites was confirmed by various characterization techniques such as Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), dynamic light scattering (DLS), and energy dispersive X-ray (EDX) technology. CCIO NCs were discovered to have a spherical shape and an average size of 40 nm. Based on DLS zeta potential analysis, CCIO NCs were found to be anionic. CCIO NCs also showed significant antimicrobial and antioxidant activity. Overall, considering their physical and chemical properties, the application of CCIO NCs for the adsorption of various dyes (~91%) and water pollutants (chromium = ~60%) has been considered here since they exhibit great adsorption capacity owing to their microporous structure, and represent a step forward in water purification.

All-cellulose composite yarn via welding engineering.

Due to the wide range of available raw materials and excellent biocompatibility, all-cellulose composites (ACCs) have received significant attention as a kind of renewable and biodegradable candidate to replace petroleum-based synthetic polymers. However, most current research of ACCs is limited to film and bulk materials. Herein, we present a simple, efficient, and scalable welding method for obtaining green, self-reinforced, high performance all-cellulose composite yarns by partially dissolving and regenerating cellulose yarns with phosphoric acid. The in-situ core-shell structure of the welded yarn results in improved strength (134.6 MPa), friction resistance (8000 cycles), moisture regain (11.89 %), and dyeing properties. Moreover, the regeneration and drying procedure can be optimized to further enhance the strength (190.5 MPa) of the welded yarn. This straightforward welding approach provides a promising and convenient route for manufacturing high-performance bio-based yarn.

Low temperature carbonization and synergistic flame retardancy of cotton fabric coated by phosphorus­nitrogen flame retardants.

To solve the problems of flammability and smoldering of cotton fabric, its flame-retardant finishing was executed with biomass wool keratin (WK) and cyclic phosphate ester (CPE) through the soaking and baking process. The synergistic mechanism of WK low-temperature melting and CPE catalytic dehydration prompted the formation of protective carbonization layer on cotton fabric surface, and this protective layer reduced its pyrolysis rate, inhibited the production of combustible materials and improved its flame retardancy. The results of synchronous thermal analysis indicate that the initial decomposition temperature of WK and CPE is lower than that of cotton fabric, and they precede the endothermic degradation before fabric main body. This effectively promotes the low-temperature carbonization of cotton fabric and inhibits its pyrolysis. The initial decomposition temperature of WK/CPE treated fabrics advances by 47.9 °C-97.8 °C, presenting significant low-temperature carbonization trend. Moreover, they form 3.0 %-20.0 % aromatic structural char before the pyrolysis of cotton cellulose due to the low-temperature dehydration and carbonization reactions. The damage length after vertical burning is only 4.0 cm for treated fabric with five layers, its after-flame and smoldering disappear, and its limiting oxygen index value increases to 28.7 %. This research provides an effective idea for the flammability and smoldering problems of cotton fabric.

Dynamic patterns of gene expressional and regulatory variations in cotton heterosis.

Purpose: Although the application of heterosis has significantly increased crop yield over the past century, the mechanisms underlying this phenomenon still remain obscure. Here, we applied transcriptome sequencing to unravel the impacts of parental expression differences and transcriptomic reprogramming in cotton heterosis. Methods: A high-quality transcriptomic atlas covering 15 developmental stages and tissues was constructed for XZM2, an elite hybrid of upland cotton (Gossypium hirsutum L.), and its parental lines, CRI12 and J8891. This atlas allowed us to identify gene expression differences between the parents and to characterize the transcriptomic reprogramming that occurs in the hybrid. Results: Our analysis revealed abundant gene expression differences between the parents, with pronounced tissue specificity; a total of 1,112 genes exhibited single-parent expression in at least one tissue. It also illuminated transcriptomic reprogramming in the hybrid XZM2, which included both additive and non-additive expression patterns. Coexpression networks between parents and hybrid constructed via weighted gene coexpression network analysis identified modules closely associated with fiber development. In particular, key regulatory hub genes involved in fiber development showed high-parent dominant or over dominant patterns in the hybrid, potentially driving the emergence of heterosis. Finally, high-depth resequencing data was generated and allele-specific expression patterns examined in the hybrid, enabling the dissection of cis- and trans-regulation contributions to the observed expression differences. Conclusion: Parental transcriptional differences and transcriptomic reprogramming in the hybrid, especially the non-additive upregulation of key genes, play an important role in shaping heterosis. Collectively, these findings provide new insights into the molecular basis of heterosis in cotton.

An insight into heat stress response and adaptive mechanism in cotton.

The growing worldwide population is driving up demand for cotton fibers, but production is hampered by unpredictable temperature rises caused by shifting climatic conditions. Numerous research based on breeding and genomics have been conducted to increase the production of cotton in environments with high and low-temperature stress. High temperature (HT) is a major environmental stressor with global consequences, influencing several aspects of cotton plant growth and metabolism. Heat stress-induced physiological and biochemical changes are research topics, and molecular techniques are used to improve cotton plants' heat tolerance. To preserve internal balance, heat stress activates various stress-responsive processes, including repairing damaged proteins and membranes, through various molecular networks. Recent research has investigated the diverse reactions of cotton cultivars to temperature stress, indicating that cotton plant adaptation mechanisms include the accumulation of sugars, proline, phenolics, flavonoids, and heat shock proteins. To overcome the obstacles caused by heat stress, it is crucial to develop and choose heat-tolerant cotton cultivars. Food security and sustainable agriculture depend on the application of genetic, agronomic, and, biotechnological methods to lessen the impacts of heat stress on cotton crops. Cotton producers and the textile industry both benefit from increased heat tolerance. Future studies should examine the developmental responses of cotton at different growth stages, emphasize the significance of breeding heat-tolerant cultivars, and assess the biochemical, physiological, and molecular pathways involved in seed germination under high temperatures. In a nutshell, a concentrated effort is required to raise cotton's heat tolerance due to the rising global temperatures and the rise in the frequency of extreme weather occurrences. Furthermore, emerging advances in sequencing technologies have made major progress toward successfully se sequencing the complex cotton genome.

Negatively Charged Carbon Dots Employed Symplastic and Apoplastic Pathways to Enable Better Plant Delivery than Positively Charged Carbon Dots.

Efficient delivery of nanoparticles (NPs) to plants is important for agricultural application. However, to date, we still lack knowledge about how NPs' charge matters for its translocation pathway, i.e., symplastic and apoplastic pathways, in plants. In this study, we synthesized and used negatively charged citrate sourced carbon dots (C-CDs, -37.97 ± 1.89 mV), Cy5 coated C-CDs (Cy5-C-CDs, -41.90 ± 2.55 mV), positively charged PEI coated carbon dots (P-CDs, +43.03 ± 1.71 mV), and Cy5 coated P-CDs (Cy5-P-CDs, +48.80 ± 1.21 mV) to investigate the role of surface charges and coatings on the employed translocation pathways (symplastic and apoplastic pathways) of charged NPs in plants. Our results showed that, different from the higher fluorescence intensity of P-CDs and Cy5-P-CDs in extracellular than intracellular space, the fluorescence intensity of C-CDs and Cy5-C-CDs was similar between intracellular and extracellular space in cucumber and cotton roots. It suggests that the negatively charged CDs were translocated via both symplastic and apoplastic pathways, but the positively charged CDs were mainly translocated via the apoplastic pathway. Furthermore, our results showed that root applied negatively charged C-CDs demonstrated higher leaf fluorescence than did positively charged P-CDs in both cucumber (8.09 ± 0.99 vs 3.75 ± 0.23) and cotton (7.27 ± 1.06 vs 3.23 ± 0.22), indicating that negatively charged CDs have a higher translocation efficiency from root to leaf than do positively charged CDs. It should be noted that CDs do not affect root cell activities, ROS level, and photosynthetic performance in cucumber and cotton, showing its good biocompatibility. Overall, this study not only figured out that root applied negatively charged CDs employed both symplastic and apoplastic pathways to do the transportation in roots compared with mainly the employment of apoplastic pathway for positively charge CDs, but also found that negatively charge CDs could be more efficiently translocated from root to leaf than positively charged CDs, indicating that imparting negative charge to NPs, at least CDs, matters for its efficient delivery in crops.

Functional dyeing of cellulose macromolecule/synthetic fibers two-component fabrics with sustainable microbial prodigiosins.

As an important cellulose macromolecular-based material, cotton/polyamide and cotton/polyester fabrics are widely utilized in the textile and garment field due to their combination of the advantages of both cotton and synthetic fibers, such as excellent breathability, hygroscopicity, and abrasion performance. However, the synthetic dyes used in fabric coloration are derived from non-renewable resources, and the long-time dyeing procedure poses large pollution problems. Herein, microbial prodigiosins fermented by Serratia marcescens were employed for cotton/polyamide and cotton/polyester fabric dyeing and functionalizing. The results demonstrated that the prodigiosins suspension exhibited outstanding stability. Synthetic fibers contributed significantly to the overall color of fabrics and provided good dimensional stability and durability. In contrast, cotton fibers imparted relatively lighter color but played an essential role in enhancing the softness and comfort of fabrics. The dyed fabrics presented bright overall color light with good uniformity. Furthermore, the antibacterial rates of the dyed cotton/polyamide and cotton/polyester fabrics were 87.31 % and 89.70 %, respectively. The UPF values of the dyed cotton/polyamide and cotton/polyester fabrics were recorded as 52.3 and 93.5, respectively. This study provided a novel approach for cleaner functional dyeing of cotton/synthetic fiber two-component fabrics using prodigiosins.

SRNet-YOLO: A model for detecting tiny and very tiny pests in cotton fields based on super-resolution reconstruction.

Introduction: Effective pest management is important during the natural growth phases of cotton in the wild. As cotton fields are infested with "tiny pests" (smaller than 32×32 pixels) and "very tiny pests" (smaller than 16×16 pixels) during growth, making it difficult for common object detection models to accurately detect and fail to make sound agricultural decisions. Methods: In this study, we proposed a framework for detecting "tiny pests" and "very tiny pests" in wild cotton fields, named SRNet-YOLO. SRNet-YOLO includes a YOLOv8 feature extraction module, a feature map super-resolution reconstruction module (FM-SR), and a fusion mechanism based on BiFormer attention (BiFormerAF). Specially, the FM-SR module is designed for the feature map level to recover the important feature in detail, in other words, this module reconstructs the P5 layer feature map into the size of the P3 layer. And then we designed the BiFormerAF module to fuse this reconstruct layer with the P3 layer, which greatly improves the detection performance. The purpose of the BiFormerAF module is to solve the problem of possible loss of feature after reconstruction. Additionally, to validate the performance of our method for "tiny pests" and "very tiny pests" detection in cotton fields, we have developed a large dataset, named Cotton-Yellow-Sticky-2023, which collected pests by yellow sticky traps. Results: Through comprehensive experimental verification, we demonstrate that our proposed framework achieves exceptional performance. Our method achieved 78.2% mAP on the "tiny pests" test result, it surpasses the performance of leading detection models such as YOLOv3, YOLOv5, YOLOv7 and YOLOv8 by 6.9%, 7.2%, 5.7% and 4.1%, respectively. Meanwhile, our results on "very tiny pests" reached 57% mAP, which are 32.2% higher than YOLOv8. To verify the generalizability of the model, our experiments on Yellow Sticky Traps (low-resolution) dataset still maintained the highest 92.8% mAP. Discussion: The above experimental results indicate that our model not only provides help in solving the problem of tiny pests in cotton fields, but also has good generalizability and can be used for the detection of tiny pests in other crops.