Enhancement of EDDS-photo-Fenton process with plant-based coagulants for winery wastewater management.

To achieve an efficient remediation of a winery wastewater (WW), it was studied a physical-chemical process (coagulation-flocculation-decantation - CFD) involving plant-based coagulants (PBC) with advanced oxidation processes (AOPs), aiming to achieve the Portuguese legal limits. Initially, one invasive (Acacia dealbata) and three native species (Quercus ilex, Platanus x acerifólia and Tanacetum vulgare) were collected and used as plant-based coagulants (PBCs). The combination of Platanus acerifólia (P.a.) seeds with polyvinylpolypyrrolidone (PVPP) achieved high turbidity (97.3%) and chemical oxygen demand (COD = 48.2%) removals, from raw WW, with [PBC] = 0.1 g/L, [PVPP] = 5 mg/L, pH = 3.0, fast mix = 150 rpm/3 min, slow mix = 20 rpm/20 min, sedimentation time = 12 h. Different AOPs were studied to treat raw WW, with photo-Fenton process revealing the highest COD efficiency (88.0%). To enhance the capabilities of photo-Fenton, ethylenediamine-N,N'-disuccinic acid trisodium salt (EDDS) was assessed as a chelation agent, reducing iron precipitation. The pre-treatment of WW by PBCs followed by EDDS/photo-Fenton (pH = 6.0, [H2O2] = 175 mM, [Fe2+] = 5 mM, [EDDS] = 1 mM, T = 298 K, time = 240 min) increased the COD removal, whatever the radiation source applied (UV-C, UV-A and solar). Among the different processes, the combined P. a. seeds and UV-C/EDDS/Fenton allowed increase the WW biodegradability from 0.26 to 0.46, and achieved a COD removal of 95.7%, reaching the Portuguese legal limits. As final remark, the synergy of PBCs and EDDS/photo-Fenton is considered effective and sustainable process for raw WW remediation and water reuse.

Combined organic coagulants and photocatalytic processes for winery wastewater treatment.

Due to the consumers demand for quality wines, washing and disinfection operations are necessary in wine productions, leading to the generation of large volumes of winery wastewater (WW) with a high organic content which has the potential to cause irreversible environmental impacts. The aim and novelty of this work is the production of natural organic coagulants (NOCs) to be applied in coagulation-flocculation-decantation (CFD) process. To complement this treatment process, it is also aimed the performed a photo-Fenton process, combining hydrogen peroxide (H2O2) and potassium persulfate (KPS). The Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) showed that NOCs are carbon-based materials with adsorption capacity. Under the best operational conditions, NOCs achieved a turbidity removal between 86.2 and 98.9%, a total suspended solids (TSS) removal ranging between 85.0 and 94.9% and a dissolved organic carbon (DOC) removal ranging between 14.1 and 44.9%. To degrade the DOC present in the WW, different advanced oxidation processes (AOPs) were tested. Results showed that KPS-photo-Fenton, under the best operational conditions [Fe2+] = 2.5 mM, [KPS] = 1.0 mM, pH = 3.0, radiation UV-C mercury lamp (254 nm), agitation 350 rpm, temperature 298 K, reaction time 240 min achieved a DOC removal of 91.2 and 96.8%, with a H2O2 consumption of 156.9 and 199.0 mM, respectively for red and white WW. With application of combined CFD-KPS-photo-Fenton process, it was observed an increase of DOC removal with lower H2O2 consumptions. The energy consumption of the photosystem was evaluated by application of electric energy per mass (EEM). The application of KPS-photo-Fenton process achieved an EEM of 0.308 and 0.0309 kWh/g/L DOC, with a cost of 2.05 and 2.59 €/g/L DOC respectively for red and white WW. The combination of CFD-KPS-photo-Fenton decreased significantly the costs of treatment and the treated wastewater achieved the Portuguese legal values for wastewater discharge. This work shows that NOCs are a promising technology that can be an alternative to traditional metal salts, the combination of sulfate radicals with hydroxyl radicals can achieve high DOC removal and the combination of CFD with KPS-photo-Fenton process can decrease the operational costs.

Case report: Early molecular confirmation and sodium polystyrene sulfonate management of systemic pseudohypoaldosteronism type I.

Introduction: Type 1 pseudohypoaldosteronism (PHA) consists of resistance to aldosterone. Neonatal presentation is characterized by salt wasting, hyperkalemia, and metabolic acidosis with high risk of mortality. Type 1 PHA can be autosomal dominant (renal type 1) or autosomal recessive (systemic type 1). Renal PHA type 1 can be feasibly managed with salt supplementation; however, systemic PHA type 1 tends to have more severe electrolyte imbalance and can be more refractory to treatment. Case Presentation: We present a case of a 3-year-old girl with systemic PHA type 1, diagnosed and confirmed molecularly in infancy, who has been successfully managed with sodium polystyrene sulfonate decanted into feeds along with sodium supplementation. On day 5 of life, a full-term female infant presented to the ED for 2 days of non-bloody, non-bilious emesis, along with hypothermia to 94°F. Laboratory results were notable for hyponatremia (Na) of 127, hyperkalemia (K) of 7.9, and acidosis with bicarbonate level of 11.2. Genetic testing ordered within a week of life confirmed PHA type 1 with a homozygous pathogenic frameshift variant in SCNN1A c.575delA (p.Arg192GlyfsX57). Sodium polystyrene sulfonate and feeds were decanted until the age of 16 months, and she was also continued on NaCl supplementation. She was gradually transitioned to directly administered sodium polystyrene sulfonate without any electrolyte issues. She has overall done well after gastrostomy-tube (G-tube) placement without severe hyperkalemia even with several hospitalizations for gastrointestinal or respiratory illnesses. Discussion/Conclusion: A treatment approach to systemic PHA and sodium polystyrene sulfonate administration in neonates and infants is described.

Food By-Product Valorization by Using Plant-Based Coagulants Combined with AOPs for Agro-Industrial Wastewater Treatment.

Re-using and adding value to by-products is one of the current focuses of the agri-food industry, following the Sustainable Development Goals of United Nations. In this work, the by-products of four plants, namely chestnut burr, acorn peel, olive leaf, and grape stem were used as coagulants to treat elderberry wastewater (EW), a problematic liquid effluent. EW pre-treatment using these natural coagulants showed promising results after pH and coagulant dosage optimization. However, the decrease in total organic carbon (TOC) was not significant, due to the addition of the plant-based natural coagulants which contain carbon content. After this pre-treatment, the photo-Fenton advanced oxidation process was selected, after preliminary assays, to improve the global performance of the EW treatment. Photo-Fenton was also optimized for the parameters of pH, H2O2, Fe2+, and irradiance power, and the best conditions were applied to the EW treatment. Under the best operational conditions defined in the parametric study, the combined results of coagulation-flocculation-decantation (CFD) and photo-Fenton for chestnut burr, acorn peel, olive leaf, and grape stem were, respectively, 90.2, 89.5, 91.5, and 88.7% for TOC removal; 88.7, 82.0, 90.2 and 93.1%, respectively, for turbidity removal; and finally, 40.6, 42.2, 45.3, and 39.1%, respectively, for TSS removal. As a final remark, it is possible to suggest that plant-based coagulants, combined with photo-Fenton, can be a promising strategy for EW treatment that simultaneously enables valorization by adding value back to food by-products.

Microbiological and Enzymatic Activity Modulates the Bitter Taste Reduction in Decanted Coratina Olive Oil.

Coratina monocultivar extra virgin olive oil (EVOO) is known for its level of bitterness, which, if too high, can cause consumer acceptance problems. The aim of this study was to modulate the bitter taste of freshly produced olive oil through endogenous enzymatic activity and microbiota during the decantation phase. The opalescent appearance of the newly produced EVOO was substantially reduced during the first three months of decantation due to the deposition of more than 90% of suspended material, consisting of vegetation water and suspended solid particles. The high content of biophenols and the reduction in water concentration in the oil samples negatively affected the survival of yeasts, which were absent in the oil samples at the end of the third month of decantation. The oleuropeinolytic activity was very intense during the first month of decantation, whereas the reduction in the bitter taste associated with the aglycons was consistent only in the second and third months of decantation. At the end of decantation, the sensory notes of bitterness in the Coratina EVOO were reduced by 33%, lowering the position on the value scale without altering the other qualitative parameters whose values fell within the limits of the commercial EVOO class.

Autologous Fat Grafting with or without Processing: A Study in an Indian Clinical Context.

BACKGROUND: Although fat grafting has become an attractive method of correction of soft tissue deficiencies, variability in results exists. As the understanding of mechanism of survival of graft improves, the concepts regarding fat grafting change. There are many ways to process the aspirated fat with no clear method superior. AIM: The aim of this study was to evaluate the role of processing during autologous fat transfer. MATERIALS AND METHODS: The patients were serially divided into two groups, namely, A and B. Harvesting of lipoaspirate and injection of fat were same in both the groups. In group A, no processing was done. In group B, the fat was processed by sedimentation and injected. Patient satisfaction was assessed following the procedure and statistical analysis was done using the Mann-Whitney U-test. RESULTS: Young females between 21 and 30 years formed the majority of patients who opted for fat grafting procedure. Most of the procedures were performed for defects in the face (93.3%). The most common indication of fat grafting was contour deformities, with abdomen being the most preferred donor site. The mean patients' satisfaction following fat grafting without processing is 2.2 ± 0.68. The mean patients' satisfaction following fat grafting with processing is 2.53 ± 0.99. CONCLUSION: There was not a statistically significant difference in patient outcomes following fat grafting, with or without processing, in terms of patient satisfaction. Autologous fat grafting was found to be a safe procedure with no significant complications.

Combination of Coagulation-Flocculation-Decantation and Ozonation Processes for Winery Wastewater Treatment.

This research assessed a novel treatment process of winery wastewater, through the application of a chemical-based process aiming to decrease the high organic carbon content, which represents a difficulty for wastewater treatment plants and a public health problem. Firstly, a coagulation-flocculation-decantation process (CFD process) was optimized by a simplex lattice design. Afterwards, the efficiency of a UV-C/ferrous iron/ozone system was assessed for organic carbon removal in winery wastewater. This system was applied alone and in combination with the CFD process (as a pre- and post-treatment). The coagulation-flocculation-decantation process, with a mixture of 0.48 g/L potassium caseinate and 0.52 g/L bentonite at pH 4.0, achieved 98.3, 97.6, and 87.8% removals of turbidity, total suspended solids, and total polyphenols, respectively. For the ozonation process, the required pH and ferrous iron concentration (Fe2+) were crucial variables in treatment optimization. With the application of the best operational conditions (pH = 4.0, [Fe2+] = 1.0 mM), the UV-C/ferrous iron/ozone system achieved 63.2% total organic carbon (TOC) removal and an energy consumption of 1843 kWh∙m-3∙order-1. The combination of CFD and ozonation processes increased the TOC removal to 66.1 and 65.5%, respectively, for the ozone/ferrous iron/UV-C/CFD and CFD/ozone/ferrous iron/UV-C systems. In addition, the germination index of several seeds was assessed and excellent values (>80%) were observed, which revealed the reduction in phytotoxicity. In conclusion, the combination of CFD and UV-C/ferrous iron/ozone processes is efficient for WW treatment.

Treatment of wood industry wastewater by combined coagulation-flocculation-decantation and fenton process.

In the present research, the efficiency of turbidity and chemical oxygen demand (COD) reduction from the wood industry wastewater (WIW) by the use of a combined coagulation-flocculation-decantation (CFD) - Fenton process was studied. Firstly, the performance of three coagulants such as ferric chloride (FeCl3 ), aluminum sulphate (alum), and polyaluminum chloride (PACl) was evaluated. The polyacrylamide (PAM) was used as a flocculant. The results showed that the polyaluminum chloride had a high removal efficiency. The COD reduction of 84.1% and turbidity removal of 82.0% of were obtained in coagulation-flocculation-decantation (CFD). Secondly, Fenton process was optimized, by the use of a response surface methodology (RSM), with application of a central composite design (CCD). The maximum turbidity and COD removal obtained by this process were 94.1% and 72.5% respectively, under optimal conditions ([Fe2+ ] = 250 mg/L, [H2 O2 ] = 500 mg/L, pH 3.5, time 60 min). The kinetics of COD and turbidity removal were determined by the model of first order. In conclusion, the combination of coagulation-flocculation-decantation (CFD) - Fenton process presented as a remarkable method for wood wastewater treatment. PRACTITIONER POINTS: A combination of coagulation-flocculation-decantation and Fenton process was introduced for the wood industry wastewater treatment. A designed experimental approach for treatment of wood industry wastewater using a Fenton process was studied. The yields of COD, BOD5 , N-NO3 , P-PO4 , and dye removal were obtained according to the standard limits in Iran.

Performance comparison of commercial TiO2: separation and reuse for bacterial photo-inactivation and emerging pollutants photo-degradation.

This research aims to compare the disinfection and degradation effectiveness in water of a commercial suspension of nano-TiO2 (TiO2Levenger) with the standard TiO2Degussa P25. Photo-inactivation and photo-degradation experiments were conducted with UVA-vis light. Concerning the disinfection, the effects of TiO2 dose (0-2 g/l), water matrix, bacterium type (Gram-positive or Gram-negative), and bacterial regrowth after the photo-treatments were studied for each catalyst. The experimental results show that Enterococcus sp. (Gram-positive) was more resistant to the photo-treatments than Escherichia coli (Gram-negative) for both catalyst; however, postirradiation trends showed similar behavior for both bacteria, favoring regrowth for short-treated cells and decay for longer-treated ones. Caffeine was selected as a model substance of pharmaceuticals and personal care products. In terms of caffeine removal, the effects of TiO2 dose (0-2 g/l) and water matrix were analyzed. Besides, the comparison between mechanical coagulation-flocculation-decantation and simple decantation of TiO2 was carried out. The results show that simple decantation allowed the recovery of 97.5% of TiO2 Degussa P25 and TiO2 Levenger within 1 day of simple decantation, while applying the proposed mechanical coagulation-flocculation decantation 99.7% of recovery of both catalysts was achieved in 2 hours. Finally, the subsequent reuse of both catalysts was proved with little loss of efficiency in terms of photo-disinfection during the four cycles. Nevertheless, the standard TiO2 Degussa P25 photo-degradation efficiency of caffeine decreases considerably as compared to commercial suspension of TiO2 Levenger concerning the reutilization.

Microfluidic In-Flow Decantation Technique Using Stepped Pillar Arrays and Hydraulic Resistance Tuners.

Separating the particles from the liquid component of sample solutions is important for several microfluidic-based sample preparations and/or sample handling techniques, such as plasma separation from whole blood, sheath-free flow focusing, particle enrichment etc. This paper presents a microfluidic in-flow decantation technique that provides the separation of particles from particle-free fluid while in-flow. The design involves the expansion of sample fluid channel in lateral and depth directions, thereby producing a particle-free layer towards the walls of the channel, followed by gradual extraction of this particle-free fluid through a series of tiny openings located towards one-end of the depth-direction. The latter part of this design is quite crucial in the functionality of this decantation technique and is based on the principle called wee-extraction. The design, theory, and simulations were presented to explain the principle-of-operation. To demonstrate the proof-of-principle, the experimental characterization was performed on beads, platelets, and blood samples at various hematocrits (2.5%-45%). The experiments revealed clog-free separation of particle-free fluid for at least an hour of operation of the device and demonstrated purities close to 100% and yields as high as 14%. The avenues to improve the yield are discussed along with several potential applications.

Effect of Different Clarification Methods on Volatile Aroma Compound Composition of Virgin Olive Oil.

This study investigates the effect of industrial scale filtration of fresh monovarietal virgin olive oil from Buza and Istarska bjelica cultivars on their volatiles, total phenols and sensory characteristics, and compares the oil samples clarified by filtration with those clarified by natural sedimentation/decantation after six months of storage. Filtration had a different effect on volatiles from the oil samples obtained from different cultivars. In the oil from Buza cultivar immediately after filtration only the amount of (Z)-2-pentenol slightly increased, but in Istarska bjelica the oil filtration affected eight compounds (the amount of hexanal, (E)-2-pentenal, (Z)-3-hexenal, (Z)-2-pentenol and (Z)-3-hexen-1-ol increased, while of hexyl acetate, (E)-2-penten-1-ol and (E)-2-hexen-1-ol decreased). In fresh filtered oil from Buza cultivar a slight decrease of total phenols was observed, while in those from Istarska bjelica the decrease was sharp, causing a decrease in the pungency and bitterness. Sedimentation/decantation had advantages over oil filtration of both cultivars, due to improved effect on the preservation of the sensory profile and the level of total phenols. Tentative aroma profiles based on odorant series obtained from the odour activity values were compared to the actual olive oil sensory profiles. These results could have a high level of applications in the olive oil industry for the optimization of the technology for obtaining monovarietal virgin olive oil with preserved specific and typical sensory characteristics, but also may serve experts to choose an appropriate virgin olive oil clarification method prior to analysis of volatile compounds.

Effect of Decantation Time on Viability and Apoptosis in Adipocytes After Liposuction.

BACKGROUND: The effect of decantation time on viability and apoptosis in adipocytes has not been described. The objective of the study was to describe viability and apoptosis in adipocytes up to 2 h after harvesting. METHODS: Twenty patients who underwent esthetic liposuction from the abdomen were included. The lipoaspirate was obtained from the infra-umbilical area with the tumescent technique. Liposuction was performed with a 60-ml syringe and a 3-ml cannula. Lipoaspirates were centrifuged at 50 g for 5 min at 0, 60 and 120 min after harvesting. One gram of fat was digested with 0.1% type 1 collagenase and incubated at 37 degrees for 30 min. Adipocytes were counted on 10 random microscopic fields. Apoptosis was determined by TUNEL assay. A fluorescence microscope was used to visualize the staining nuclei and cells. RESULTS: Regarding viability, immediately after harvesting, 57.6 ± 18.9% of the cells were viable, whereas 60 min after liposuction the viability decreased to 51.62 ± 8.8% and 120 min after liposuction the percentage of viable cells was 46.8 ± 16.9%. The percentage of apoptotic cells at time 0 was 38.2 ± 8.0%, whereas it was 51.24 ± 8.1% at 60 min and 62.9 ± 16.1% at 120 min after collection. CONCLUSIONS: Apoptosis and mortality of adipocytes after liposuction increase directly proportional to the time of decantation. Lipoinjection should be performed as soon as possible after harvesting. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Settling of virgin olive oil from horizontal screw solid bowl in static conditions.

This work was aimed to study the clarification efficiency of natural decantation in settling tank on virgin olive oil obtained from a two-ways continuous process. For this purpose, the impurities content of the virgin olive oil were monitored during settling process in settling tank at two different depths. Efficiency of purging system was determined for two days. The experiments were performed at industrial scale during three crop years. During the first minutes of settling was observed an ascent of the smaller organic particles of the oil. Then, most of the virgin olive oil impurities were settled at 300 min, independently of the initial content of virgin olive oil. Finally, oil decantation showed slower rate. Higher clarification values were obtained for those decanter oils with higher impurities content, achieving clarification percentages between of 62.69 and 95.91% at 48 h of settling. The highest settling efficiency was observed for those decanter oils with initial higher impurities content. The purging system used in the settling tanks was not able to remove the most of settled impurities since a considerable amount of the impurities remained in the tank after 48 h, between 13.6 and 71.41% for the studied oils. In the tank purges was observed important oil losses. Therefore, decantation was not an efficient system for oil clarification since its settling capacity varied depending on the initial impurities content and due to the settled impurities can not be removed fully by purging system.

Carrier-based dry powder inhalation: Impact of carrier modification on capsule filling processability and in vitro aerodynamic performance.

This study aims to investigate the effect of carrier characteristics and dosator capsule filling operation on the in vitro deposition of mixtures containing salbutamol sulphate (SS) and lactose and mannitol as model carrier materials. The carrier surfaces of lactose and mannitol were modified via wet decantation. The impact of the decantation process on the properties of carriers was investigated by laser diffraction, density and powder flow measurements, N2 physisorption, small and wide angle X-ray scattering (SWAXS) and scanning electron microscopy (SEM). Differences in carrier type and untreated and decanted materials were identified and the SAXS measurements proved to be a promising technology confirming the successful removal of fines. Adhesive carrier API mixtures with carrier-to-API ratio of 99:1 wt% were prepared, mixture homogeneity was tested and subsequently the mixtures were filled into capsules at different process settings. Finally, the influence of the decantation process on the in vitro performance of the adhesive mixtures was tested with a next generation impactor. For lactose, the decantation decreased the fine particle fraction (FPF) of SS, whereas the FPF of mannitol as a carrier was only affected by the capsule filling process. In summary, the DPI formulation based on untreated lactose, especially by capsule filling using a dosing chamber to powder layer (compression) ratio of 1:2, proved to be superior in terms of the dosing accuracy (RSD<0.8%) and the in vitro aerodynamic performance (FPF of 12%).

Autologous fat processing via the Revolve system: quality and quantity of fat retention evaluated in an animal model.

BACKGROUND: Currently, fat graft viability and retention cannot be reliably predicted. The reasons for this variability are not fully understood, although fat processing has been implicated. OBJECTIVES: The authors compare the in vitro quantity and in vivo fat retention from lipoaspirate processed by the Revolve system (LifeCell, Bridgewater, New Jersey) compared with centrifugation and decantation. METHODS: Ten patients were enrolled in this prospective study. Lipoaspirate from each patient was processed by each of 3 methods: decantation, centrifugation, and the Revolve system. Biochemical characteristics and free oil, adipose, and aqueous phases of the processed fats were determined. Fat grafts were implanted in nude mice; volume retention and quality of the fat grafts were evaluated after 28 days. Viability of retained fat was demonstrated by intact adipocytes and neovascularization on histology. RESULTS: Of the 10 patients, 9 were women and 1 was a man. Mean patient age was 40.7 ± 8.9 years (range, 30-55 years). Fat tissue obtained from all methods had good physiological properties with neutral pH and isotonic salt concentrations. The Revolve system yielded significantly less blood cell debris, a higher percentage of adipose tissue, and a lower percentage of free oil compared with the other 2 methods. Fat tissue retention from Revolve samples was significantly higher (73.2%) than that from decanted samples (37.5%) and similar to that from centrifuged samples (67.7%). CONCLUSIONS: The Revolve system produced physiologically compatible, preinjection fat with reduced contaminants and free oil in conjunction with high fat content. In an animal model, volume retention of Revolve-processed fat grafts was significantly greater than decanted samples. The Revolve system presents a fat-processing option that was less time-consuming, easier to use, and more efficient in this study than standard centrifugation or decantation.

In vitro acoustic characterization of three phospholipid ultrasound contrast agents from 12 to 43 MHz.

The acoustic properties of two clinical (Definity, Lantheus Medical Imaging, North Billerica, MA, USA; SonoVue, Bracco S.P.A., Milan, Italy) and one pre-clinical (MicroMarker, untargeted, Bracco, Geneva, Switzerland; VisualSonics, Toronto, ON, Canada) ultrasound contrast agent were characterized using a broadband substitution technique over the ultrasound frequency range 12-43 MHz at 20 ± 1°C. At the same number concentration, the acoustic attenuation and contrast-to-tissue ratio of the three native ultrasound contrast agents are comparable at frequencies below 30 MHz, though their size distributions and encapsulated gases and shells differ. At frequencies above 30 MHz, native MicroMarker has higher attenuation values and contrast-to-tissue ratios than native Definity and SonoVue. Decantation was found to be an effective method to alter the size distribution and concentration of native clinical microbubble populations, enabling further contrast enhancement for specific pre-clinical applications.

Adjustment of the expedite method for clay content determination in Rondônia soils / Ajuste de método expedito para determinação de teor de argila em solos de Rondônia

Soil clay content is an important soil attribute and has been used to classification of phosphorus status in the soil in order to determinate the needing of phosphorus amounts to be applied to crops production. The aim of this research was to adjust the method for soil clay content determination, adopted by the laboratories of Southern Brazil (ROLAS-RS/SC), for soil clay content evaluation in Rondônia soils. The study was conducted using 50 soil samples from Rondônia State with wide range clay content. It was tested shaking periods (1.5, 2.0 and 2.5h) associated with periods for soil particles decantation (1.5 and 2.0h) to correlate with the standard method for soil texture testing, known as the pipette method. Clay content determined through this method was significantly correlated with pipette method. The better treatment was the combination of 2.0h of shaking and 1.5h of decantation, resulted in total period of 3.5h, which reduced the period to determine the soil clay content without loss of accuracy.

O teor de argila é um importante atributo de solo e é utilizado na determinação de faixas de teores de fósforo para fins de recomendação de adubação. O objetivo deste trabalho foi ajustar o método de determinação de argila utilizado pelos laboratórios da ROLAS-RS/SC para avaliar os teores de argila dos solos de Rondônia. O estudo foi conduzido com 50 amostras de solos do Estado de Rondônia, com diferentes teores de argila. O teor de argila foi determinado utilizando-se o método da ROLAS-RS/SC, com diferentes períodos de agitação (1,5; 2,0 e 2,5h) e de decantação das partículas do solo (1,5 e 2,0h) e o método da pipeta, considerado padrão para essa determinação. Os teores de argila determinados nas combinações de períodos de agitação e de decantação se correlacionaram significativamente com os teores determinados pelo método da pipeta. O melhor tratamento foi a combinação de 2,0h de agitação e 1,5h de decantação, resultando em tempo total de 3,5h, que reduz o tempo para determinação do teor de argila do solo sem perda significativa da eficiência.