Eco-Friendly Fumed Nanosilica@Nanodiamond Hybrid Nanoparticles with Dual Sustainable Self-Healing and Barrier Anticorrosive Performances in Epoxy Coating.

Fumed nanosilica@nanodiamond attached by APTES [(3-aminopropyl) triethoxysilane], named FSiO2@sND, was examined as an efficient anticorrosive nanohybrid for epoxy coating. Compared with fumed nanosilica (FSiO2), nanodiamond (ND) moderated the hydrophilic nature of FSiO2@sND and offered additional functional groups to the nanohybrid, i.e., carboxylic groups of ND and functional groups of APTES, while retaining the eco-friendly nature of FSiO2 in the hybrid nanoparticle. The hybrid nanoparticle showed pH-sensitive release behavior in which APTES is released considerably in an alkaline medium, acting as an efficient corrosion inhibitor. A thorough electrochemical impedance spectroscopy (EIS) study of scratched coatings in a 3.5% NaCl solution disclosed that FSiO2@sND nanoparticles (at 0.33 wt % loading) conferred significant active/self-healing anticorrosion properties for the epoxy coatings, thanks to the release of APTES and the presence of carboxylic groups of ND taking part in forming a stable protective film on the substrate. Accordingly, epoxy/FSiO2@sND coatings showed a corrosion improvement efficiency of 138% at an optimum immersion time of 5 h, which was higher than the 96% improvement for epoxy/FSiO2 coating. Epoxy/FSiO2@sND intact coating showed much higher low-frequency impedance, i.e., 7.23 Ω·cm2, compared with epoxy/FSiO2 coating, i.e., 5.44 Ω·cm2, and neat epoxy coating, i.e., 5.71 Ω·cm2, after 22 weeks of immersion in salty solution. This result along with a detailed analysis of EIS data for intact coatings suggested that FSiO2@sND brought about strong barrier anticorrosive performance for epoxy coating. Such behavior was attributed to improved dispersion of nanohybrid in the epoxy matrix, enhanced cross-link density of the epoxy matrix, and improved coating/substrate adhesion caused by APTES and the carboxylic groups of ND.

Evaluation of Adding Natural Gum to Pectin Extracted from Ecuadorian Citrus Peels as an Eco-Friendly Corrosion Inhibitor for Carbon Steel.

The production and use of eco-friendly corrosion inhibitors allows valuable compounds contained in plant waste to be identified and repurposed while reducing the use of polluting synthetic substances. Pectin extracted from Tahiti limes (Citrus latifolia) and King mandarin (Citrus nobilis L.) in addition to natural gums-xanthan gum and latex from the "lechero" plant (Euphorbia laurifolia)-were used to create an eco-friendly corrosion inhibitor. The optimal extraction conditions for pectin were determined from different combinations of pH, temperature, and time in a 23 factorial design and evaluated according to the obtained pectin yield. The highest pectin extraction yields (38.10% and 41.20% from King mandarin and lime, respectively) were reached at pH = 1, 85 °C, and 2 h. Extraction of pectic compounds was confirmed using Fourier-transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetry analyses. Subsequently, a simplex-centroid mixture design was applied to determine the formulation of extracted pectin and natural gums that achieved the highest corrosion inhibitor effect (linear polarization and weight loss methods in NACE 1D-196 saline media using API-5LX52 carbon steel). Impedance spectroscopy analysis showed that the addition of xanthan gum to pectin (formulation 50% pectin-50% xanthan gum) improved the corrosion inhibitor effect from 29.20 to 78.21% at 400 ppm due to higher adsorption of inhibitory molecules on the metal surface.

Amino-Functionalized MXene Nanosheets Doped with Ce(III) as Potent Nanocontainers toward Self-Healing Epoxy Nanocomposite Coating for Corrosion Protection of Mild Steel.

MXene sheets, as new 2D nanomaterials, have been used in many advanced applications due to their superior thin-layered architecture, as well as their capability to be employed as novel nanocontainers for advanced applications. In this research, intercalated Ti3C2 MXene sheets were synthesized through an etching method, and then they were modified with 3-aminopropyltriethoxysilane (APTES). Cerium cations (Ce3+) as an eco-friendly corrosion inhibitor were encapsulated within Ti3C2 MXene sheets to fabricate novel self-healing epoxy nanocomposite coatings. The corrosion protection performance (CPP) of Ce3+-doped Ti3C2 MXene nanosheets (Ti3C2 MXene-Ce3+) in a 3.5 wt % sodium chloride (NaCl) solution was studied on bare mild steel substrates using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements. The self-healing CPP of epoxy coatings loaded with 1 wt % undoped and doped Ti3C2 MXene was evaluated using EIS, salt spray, and field emission scanning electron microscopy (FE-SEM) techniques. The introduction of Ti3C2 MXene-Ce3+ into the corrosive solution and artificially scribed epoxy coating enhanced the total impedance from 717 to 6596 Ω cm2 and 8876 to 32092 Ω cm2, respectively, after 24 h of immersion compared to the control samples.

Sargassum muticum extract based on alginate biopolymer as a new efficient biological corrosion inhibitor for carbon steel in hydrochloric acid pickling environment: Gravimetric, electrochemical and surface studies.

The inhibition effect of the invasive brown seaweed Sargassum muticum extract (ESM), harvested from the Atlantic coast of Morocco, against the corrosion of carbon steel (CS) in 1 M HCl medium was studied for the first time using gravimetric, electrochemical and surface techniques. The methanolic crude extract of Sargassum muticum (ESM) is rich in alginate biopolymer. The evaluation corrosion tests showed that this algal extract acts as a good mixed corrosion inhibitor for CS substrate in 1 M HCl since inhibition efficiency of 97% was reached with 1 g/L of ESM at 303 K. AC impedance findings showed that the seaweed extract adding in the corrosive electrolyte increases the polarization resistance and conversely decreases the charge capacitance at the interface. Adsorption of ESM on the substrate surface followed the Langmuir adsorption isotherm. X-ray photoelectron spectroscopy analyses (XPS) demonstrated that the corrosion inhibition mechanism of CS substrate in 1 M HCl environment by the investigated algal extract is typical of the chemisorption process and the protective barrier is mainly formed by the adsorbed biological macromolecules.