Spatio-temporal modeling of high-throughput multispectral aerial images improves agronomic trait genomic prediction in hybrid maize.

Design randomizations and spatial corrections have increased understanding of genotypic, spatial, and residual effects in field experiments, but precisely measuring spatial heterogeneity in the field remains a challenge. To this end, our study evaluated approaches to improve spatial modeling using high-throughput phenotypes (HTP) via unoccupied aerial vehicle (UAV) imagery. The normalized difference vegetation index was measured by a multispectral MicaSense camera and processed using ImageBreed. Contrasting to baseline agronomic trait spatial correction and a baseline multitrait model, a two-stage approach was proposed. Using longitudinal normalized difference vegetation index data, plot level permanent environment effects estimated spatial patterns in the field throughout the growing season. Normalized difference vegetation index permanent environment were separated from additive genetic effects using 2D spline, separable autoregressive models, or random regression models. The Permanent environment were leveraged within agronomic trait genomic best linear unbiased prediction either modeling an empirical covariance for random effects, or by modeling fixed effects as an average of permanent environment across time or split among three growth phases. Modeling approaches were tested using simulation data and Genomes-to-Fields hybrid maize (Zea mays L.) field experiments in 2015, 2017, 2019, and 2020 for grain yield, grain moisture, and ear height. The two-stage approach improved heritability, model fit, and genotypic effect estimation compared to baseline models. Electrical conductance and elevation from a 2019 soil survey significantly improved model fit, while 2D spline permanent environment were most strongly correlated with the soil parameters. Simulation of field effects demonstrated improved specificity for random regression models. In summary, the use of longitudinal normalized difference vegetation index measurements increased experimental accuracy and understanding of field spatio-temporal heterogeneity.

Effect of indomethacin on the electrical conductance and electrochemical voltammetry of copper chloride in methanol, ethanol, and their binary mixture with water.

This study investigated the physicochemical properties of the interaction of indomethacin and copper chloride using the electrical conductance measurement in methanol, ethanol, and their binary mixture with water at room temperature (298.15 K), to determine the solvation behavior, redox behavior, and kinetics. The association parameters were computed using the Fuoss-Hsia-Fernández-Prini and Fuoss-Shedlovsky models. The standard Gibbs energy for association (ΔGoA), Walden product (Λoηo), and hydrodynamic radii (RH) were calculated to study the interaction of indomethacin and copper chloride. On the other hand, cyclic voltammetry examines the electrochemical redox behavior of copper chloride using a gold electrode and its interactions with indomethacin. Results showed changes in peak potentials and currents density in the presence of indomethacin, indicating alterations in redox behavior and reaction rates. Overall, this research can be valuable in understanding the electrochemical properties and potential applications of indomethacin and copper chloride, as well as in developing new drugs or therapeutic agents, which could have has implications in various fields, including drug development, electrochemistry, and materials science.

Monitoring of plant water uptake by measuring root dielectric properties on a fine timescale: diurnal changes and response to leaf excision.

BACKGROUND: The measurement of root dielectric response is a useful non-destructive method to evaluate root growth and function. Previous studies tracked root development throughout the plant growing cycle by single-time electrical measurements taken repeatedly. However, it is known that root conductivity and uptake activity can change rapidly, coupled with the day/night cycles of photosynthetic and transpiration rate. Therefore, the low-frequency dielectric monitoring of intact root-substrate systems at minute-scale temporal resolution was tested using a customized impedance measurement system in a laboratory environment. Electrical capacitance (CR) and conductance (GR) and the dissipation factor (DR) were detected for 144 h in potted maize, cucumber and pea grown under various light/dark and temperature conditions, or subjected to progressive leaf excision or decapitation. Photosynthetic parameters and stomatal conductance were also measured to evaluate the stress response. RESULTS: The CR and GR data series showed significant 24-h seasonality associated with the light/dark and temperature cycles applied. This was attributed to the diurnal patterns in whole-plant transpiration (detected via stomatal conductance), which is strongly linked to the root water uptake rate. CR and GR decreased during the 6-day dark treatment, and dropped proportionally with increasing defoliation levels, likely due to the loss of canopy transpiration caused by dark-induced senescence or removal of leaves. DR showed a decreasing trend for plants exposed to 6-day darkness, whereas it was increased markedly by decapitation, indicating altered root membrane structure and permeability, and a modified ratio of apoplastic to cell-to-cell water and current pathways. CONCLUSIONS: Dynamic, in situ impedance measurement of the intact root system was an efficient way of following integrated root water uptake, including diurnal cycles, and stress-induced changes. It was also demonstrated that the dielectric response mainly originated from root tissue polarization and current conduction, and was influenced by the actual physiological activity of the root system. Dielectric measurement on fine timescale, as a diagnostic tool for monitoring root physiological status and environmental response, deserves future attention.

Meridian energy analysis may predict the prognosis of patients with advanced cancers receiving palliative care.

Background and aim: A better understanding of irreversible prognoses in palliative care is crucial for improving patients' quality of life and their sense of dignity. We examined whether measurements of meridian electrical conductance can noninvasively and objectively predict survival time in a hospice patient population. Experimental procedure: This was a single-center cohort study. Between 2019 and 2020, we measured skin conductance from 24 representative acupoints of 12 meridians on both sides of the body in 181 advanced cancer patients within 48 h of hospitalization and monitored their survival time. The Palliative Prognostic Score (PaP Score) was calculated for each patient, classifying them into one of three prognosis groups: Group A, B, or C. Factors associated with short-term and long-term survival were identified using multivariate regression analysis. Statistical differences in survival times were analyzed between the meridian electrical conductance measurements and PaP Scores. Results and conclusion: Analyses of the clinicopathological data from terminal cancer patients revealed that male sex, mean meridian electrical conductance measurements of ≤8.8 µA, and PaP Scores in Group C were independent predictors of short-term survival. Mean meridian electrical conductance measurements of ≤8.8 µA demonstrated good sensitivity (85.1%) and adequate specificity (60.6%) for short-term survival. A survival curve analysis revealed a mortality rate of 90.6% at 30 days among patients with meridian electrical conductance measurements of ≤8.8 µA. A mean meridian electrical conductance measurement of ≤8.8 µA can objectively assess short-term survival with advanced cancer and reduce nonbeneficial medical treatment.

Positive and Negative Changes in the Electrical Conductance Related to Hybrid Filler Distribution Gradient in Composite Flexible Thermoelectric Films Subjected to Bending.

P-type multiwalled carbon nanotubes (MWCNTs), as well as heterostructures fabricated by direct deposition of inorganic thermoelectric materials as antimony and bismuth chalcogenides on MWCNT networks are known as perspective materials for application in flexible thermoelectric polymer-based composites. In this work, the electrical response of three types of Sb2Te3-MWCNT heterostructures-based flexible films-free standing on a flexible substrate, encapsulated in polydimethylsiloxane (PDMS), and mixed in polyvinyl alcohol (PVA) is studied in comparison with the flexible films prepared by the same methods using bare MWCNTs. The electrical conductance of these films when each side of it was subsequently subjected to compressive and tensile stress during the film bending down to a 3 mm radius is investigated in relation to the distribution gradient of Sb2Te3-MWCNT heterostructures or bare MWCNTs within the film. It is found that all investigated Sb2Te3-MWCNT films exhibit a reversible increase in the conductance in response to the compressive stress of the film side with the highest filler concentration and its decrease in response to the tensile stress. In contrast, free-standing and encapsulated bare MWCNT networks with uniform distribution of nanotubes showed a decrease in the conductance irrelevant to the bending direction. In turn, the samples with the gradient distribution of the MWCNTs, prepared by mixing the MWCNTs with PVA, revealed behavior that is similar to the Sb2Te3-MWCNT heterostructures-based films. The analysis of the processes impacting the changes in the conductance of the Sb2Te3-MWCNT heterostructures and bare MWCNTs is performed. The proposed in this work bending method can be applied for the control of the uniformity of distribution of components in heterostructures and fillers in polymer-based composites.

Controlling Spin Interference in Single Radical Molecules.

Quantum interference (QI) dominates the electronic properties of single molecules even at room temperature and can lead to a large change in their electrical conductance. To take advantage of this for nanoelectronic applications, a mechanism to electronically control QI in single molecules needs to be developed. In this paper, we demonstrate that controlling the quantum interference of each spin in a stable open-shell organic radical with a large π-system is possible by changing the spin state of the radical. We show that the counterintuitive constructive spin interference in a meta-connected radical changes to destructive interference by changing the spin state of the radical from a doublet to a singlet. This results in a significant change in the room temperature electrical conductance by several orders of magnitude, opening up new possibilities for spin interference based molecular switches for energy storage and conversion applications.

Effect of Cytochrome C on the Conductance of Asolectin Membranes and the Occurrence of Through Pores at Different pHs.

The study of the electrical parameters of asolectin bilayer lipid membranes in the presence of cytochrome c (cyt c) at various concentrations showed that an increase in the concentration of cyt c leads to an increase in the membrane conductance and the appearance of through pores. The studied membranes did not contain cardiolipin, which is commonly used in studying the effect of cyt c on membrane permeability. In the presence of cyt c, discrete current fluctuations were recorded. The occurrence of these fluctuations may be associated with the formation of through pores. The diameter of these pores was ~0.8 nm, which is smaller than the size of the cyt c globule (~3 nm). Measurements carried out at pH values from 6.4 to 8.4 showed that the concentration dependence of the membrane conductance increases with increasing pH. To assess the binding of cyt c to the bilayer, we measured the concentration and pH dependences of the difference in surface potentials induced by the unilateral addition of cyt c. The amount of bound cyt c at the same concentrations decreased with increasing pH, which did not correspond to the conductance trend. An analysis of conductance traces leads to the conclusion that an increase in the integral conductance of membranes is associated with an increase in the lifetime of pores. The formation of "long-lived" pores, of which the residence time in the open state is longer than in the closed state, was achieved at various combinations of pHs and cyt c concentrations: the higher the pH, the lower the concentration at which the long-lived pores appeared and, accordingly, a higher conductance was observed. The increase in conductance and the formation of transmembrane pores are not due to the electrostatic interaction between cyt c and the membrane. We hypothesize that an increase in pH leads to a weakening of hydrogen bonds between lipid heads, which allows cyt c molecules to penetrate into the membrane. This disrupts the order of the bilayer and leads to the occurrence of through pores.

Calcineurin-dependent regulation of gap junction conductance and connexin phosphorylation in guinea pig left atrium.

Atrial fibrillation (AF) occurs from disordered atrial action potential conduction and is associated with reduced gap junction electrical conductance (Gj). The Ca2+ and calmodulin-dependent phosphatase, calcineurin, reduces Gj in ventricular myocardium via a protein phosphatase-1 (PP1)-dependent pathway culminating in phosphorylation of serine368 on connexin43 (pSer368-Cx43). However, characterisation of corresponding pathways in left atrial myocardium, which have a more complex connexin subtype profile, is undefined and was the aim of this study. Gj was measured in guinea-pig left atrium from the frequency-dependent variation of intracellular impedance; intracellular [Ca2+], ([Ca2+]i) in low-Na solution was measured by Fura-2 fluorescence. Phosphorylation of guinea-pig Ser368-Cx43 residues was measured by Western blot; Cx40 was immunoprecipitated and probed for serine/threonine residue phosphorylation. Low-Na solution reversibly reduced Gj, in turn attenuated or prevented by calcineurin inhibitors cyclosporin-A or CAIP, respectively. Moreover, Ser368-Cx43 phosphorylation in low-Na solution was also prevented by CAIP. Changes were partially prevented by fostreicin (FST), a protein phosphatase-2A (PP2A) inhibitor; but not by tautomycin, a PP1 inhibitor. Serine/threonine residues on Cx40 were also phosphorylated in low-Na solution; prevented by CAIP and attenuated by FST. Reduced Gj with raised [Ca2+]i is paralleled by a changed Cx43/Cx40 phosphorylation status; changes mediated by calcineurin and PP2A-dependent pathways, but not PP1. The pharmacological profile underlying changes to guinea-pig atrial gap junction electrical conductance with raised intracellular [Ca2+]i is fundamentally different from that in ventricular myocardium. This provides a targeted drug model whereby atrial and ventricular myocardium can be selectively targeted to correct conduction defects.

Photodynamic inactivation of microorganisms in different water matrices: The effect of physicochemical parameters on the treatment outcome.

Wastewater (WW) insufficiently treated for the disinfection of microorganisms, including pathogenic ones, is a source of concern and a possible generator of public health problems. Traditional disinfection methods to reduce pathogens concentration (e.g., chlorination, ozonation, UV) are expensive, unsafe, and/or sometimes ineffective, highlighting the need for new disinfection technologies. The promising results of photodynamic inactivation (PDI) treatment to eradicate microorganisms suggest the efficacy of this treatment to improve WW quality. This work aimed to assess if PDI can be successfully extended to real contexts for the microbial inactivation in WW. For the first time, PDI experiments with 9 different water matrices compositions were performed to inquire about the influence of some of their physicochemical parameters on the effectiveness of microbial inactivation. Bacterial photoinactivation was tested in freshwater, aquaculture water, and seawater samples, as well as in influents and effluents samples from domestic, industrial, and a mixture of industrial and domestic WW receiving wastewater treatment plants (WWTPs). Additionally, PDI assays were performed in phosphate-buffered saline isotonic solution (PBS), used as an aqueous comparative matrix. To relate the PDI disinfection efficiency with the physicochemical compositions of the different used water matrices, a series of statistical analysis were performed, in order to support our main conclusions. Overall, the results showed that PDI is an effective and promising alternative to traditionally used WW disinfection methods, with a bacterial reduction of >3.0 log CFU/mL in all the water matrices within the first hour of PDI treatment, but also that the physicochemical composition of the aqueous matrices to be PDI-disinfected must be taken into account since they seem to influence the PDI efficacy, namely the pH, with acidic pH conditions seeming to be associated to a better PDI performance in general.

Effect of Cobalt Ferrite Nanoparticles in a Hydrophilic Shell on the Conductance of Bilayer Lipid Membrane.

We measured the conductance of bilayer lipid membranes of diphytanoylphosphatidylcholine induced by interaction with cubic magnetic nanoparticles (MNPs) of cobalt ferrite 12 and 27 nm in size and coated with a hydrophilic shell. The MNP coating is human serum albumin (HSA) or polyethylene glycol (PEG). The interaction of nanoparticles added to the bulk solution with the lipid bilayer causes the formation of metastable conductive pores, which, in turn, increases the integral conductance of the membranes. The increase in conductance with increasing MNP concentration was practically independent of the particle size. The dependence of the bilayer conductance on the concentration of PEG-coated MNPs was much weaker than that on the concentration with a shell of HSA. Analyzing the current traces, we believe that the conductive pores formed as a result of the interaction of nanoparticles with the membrane can change their size, remaining metastable. The form of multilevel current traces allows us to assume that there are several metastable pore states close in energy. The average radius of the putative cylindrical pores is in the range of 0.4-1.3 nm.

Enhancing two-phase anaerobic digestion of mixture of primary and secondary sludge by adding granular activated carbon (GAC): Evaluating acidogenic and methanogenic efficiency.

Although the granular activated carbon (GAC) has been proved to enhance conventional single-phase anaerobic digestion (AD), how it impacts on acidogenic and methanogenic fermentation is still unknown. In this study, GAC was introduced to elevate the efficiency of two-phase AD, with mixture of primary and secondary sludge as substrate. Five dosages: 0, 0.1, 0.3, 0.5 and 0.7 g GAC/g TSS (Total Suspended Solids) were investigated to determine influences of GAC. The variations of biogas (hydrogen and methane), volatile fatty acids (VFAs), organics degradation and transformation in extracellular polymeric substances (EPS) and dissolved organic matters (DOM) were analyzed. Modified Gompertz model and first-order reaction equation was applied to analyze the kinetics of biogas yield and VFAs utilization, respectively. Sludge reduction, electrical conductance and pH were also quantified to evaluate the system performance. The results showed that GAC could improve two-phase AD performance by enhancing methane production and organics conversion.

Structural Asymmetry of Metallic Single-Atom Contacts Detected by Current-Voltage Characteristics.

The complex behavior of the simplest atomic-scale conductors indicates that the electrode structure itself is significant in the design of future nanoscale devices. In this study, the structural asymmetry of metallic atomic contacts formed between two macroscopic Au electrodes at room temperature was investigated. Characteristic signatures of the structural asymmetries were detected by fast current-voltage (I-V) measurements with a time resolution of approximately 100 µs. Statistical analysis of more than 300,000 I-V curves obtained from more than 1000 contact-stretching processes demonstrates that the current rectification properties are correlated with the conductance of the nanocontacts. A substantial suppression of the variation in current rectification was observed for the atomic contacts with integer multiples of the conductance quantum. Statistical analysis of the time-resolved I-V curves revealed that the current rectification variations increased significantly from 500 µs onward before the breakage of the atomic contacts. Ab initio atomistic simulations of the stretching processes and corresponding I-V characteristics confirmed the magnitude of the rectification and related it to the structural asymmetries in the breakdown process of the junctions. Overall, we provide a better understanding of the interplay between geometric and electronic structures at atomically defined metal-metal interfaces by probing charge transport properties in extremely sensitive nanocontacts.

Development of Waste Polystyrene-Based Copper Oxide/Reduced Graphene Oxide Composites and Their Mechanical, Electrical and Thermal Properties.

The current study reports the effect of different wt. ratios of copper oxide nanoparticle (CuO-NPs) and reduced graphene oxide (rGO) as fillers on mechanical, electrical, and thermal properties of waste polystyrene (WPS) matrix. Firstly, thin sheets of WPS-rGO-CuO composites were prepared through solution casting method with different ratios, i.e., 2, 8, 10, 15 and 20 wt.% of CuO-NPs and rGO in WPS matrix. The synthesized composite sheets were characterized by Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray (EDX), X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA). The electrical conductance and mechanical strength of the prepared composites were determined by using LCR meter and universal testing machine (UTM). These properties were dependent on the concentrations of CuO-NPs and rGO. Results display that the addition of both fillers, i.e., rGO and CuO-NPs, collectively led to remarkable increase in the mechanical properties of the composite. The incorporation of rGO-CuO: 15% WPS sample, i.e., WPS-rGO-CuO: 15%, has shown high mechanical strength with tensile strength of 25.282 MPa and Young modulus of 1951.0 MPa, respectively. Similarly, the electrical conductance of the same composite is also enhanced from 6.7 × 10-14 to 4 × 10-7 S/m in contrast to WPS at 2.0 × 106 Hz. The fabricated composites exhibited high thermal stability through TGA analysis in terms of 3.52% and 6.055% wt. loss at 250 °C as compared to WPS.

Electric Factors in Wound Healing.

Significance: Electric factors such as electric charges, electrodynamic field, skin battery, and interstitial exclusion permeate wound healing physiology and physiopathology from injury to re-epithelialization. The understanding of how electric factors contribute to wound healing and how treatments may interfere with them is fundamental for the development of better strategies for the management of pathological scarring and chronic wounds. Recent Advances: Angiogenesis, cell migration, macrophage activation hemorheology, and microcirculation can interfere and be interfered with electric factors. New treatments with various types of electric currents, laser, light emitting diode, acupuncture, and weak electric fields applied directly on the wound have been developed to improve wound healing. Critical Issues: Despite the basic and clinical development, pathological scars such as keloids and chronic wounds are still a challenge. Future Directions: New treatments can be developed to improve skin wound healing taking into account the influence of electrical charges. Monitoring electrical activity during skin healing and the influence of treatments on hemorheology and microcirculation are examples of how to use knowledge of electrical factors to increase their effectiveness.

Conductance-Based Interface Detection for Multi-Phase Pipe Flow.

Sediment and flow depth monitoring in sewers is important for informing flow models and for predicting and mitigating against sewer blockage formation and surcharge. In this study, a novel sensor based on conductance measurement has been developed and tested under a laboratory environment and validated by a finite-element model. The relative conductance is measured between pairs of adjacent electrodes to provide a conductance profile along the sensor length. A piecewise linear relationship between conductance and electrode length was derived and the interface positions between sediment, water, and air can be determined from the profile. The results demonstrated that the root mean square error of the model and the measured interface level are within 1.4% and 2.6% of sensor's measurement range. An error distribution of interface height shows that all anticipated errors are within the resolution of the electrode length increments. Furthermore, it was found that the conductivity of the measured medium is proportional to the gradient of the linear relationship of conductance and electrode length. It could therefore prove a valuable new tool for the accurate quantification of sediment and flow levels in sewer conduits, coastal environments, drainage systems for transport networks, and other industrial or academic applications.

Switching Quantum Interference in Phenoxyquinone Single Molecule Junction with Light.

Quantum interference (QI) can lead to large variations in single molecule conductance. However, controlling QI using external stimuli is challenging. The molecular structure of phenoxyquinone can be tuned reversibly using light stimulus. In this paper, we show that this can be utilized to control QI in phenoxyquinone derivatives. Our calculations indicate that, as a result of such variation in molecular structure of phenoxyquinone, a crossover from destructive to constructive QI is induced. This leads to a significant variation in the single molecule conductance by a couple of orders of magnitude. This control of QI using light is a new paradigm in photosensitive single molecule switches and opens new avenues for future QI-based photoswitches.

Tuning Electrical Conductance in Bilayer MoS2 through Defect-Mediated Interlayer Chemical Bonding.

Interlayer interaction could substantially affect the electrical transport in transition metal dichalcogenides, serving as an effective way to control the device performance. However, it is still challenging to utilize interlayer interaction in weakly interlayer-coupled materials such as pristine MoS2 to realize layer-dependent tunable transport behavior. Here, we demonstrate that, by substitutional doping of vanadium atoms in the Mo sites of the MoS2 lattice, the vanadium-doped monolayer MoS2 device exhibits an ambipolar field effect characteristic, while its bilayer device demonstrates a heavy p-type field effect feature, in sharp contrast to the pristine monolayer and bilayer MoS2 devices, both of which show similar n-type electrical transport behaviors. Moreover, the electrical conductance of the doped bilayer MoS2 device is drastically enhanced with respect to that of the doped monolayer MoS2 device. Employing first-principle calculations, we reveal that such striking behaviors arise from the presence of electrical transport networks associated with the enhanced interlayer hybridization of S-3pz orbitals between adjacent layers activated by vanadium dopants in the bilayer MoS2, which is nevertheless absent in its monolayer counterpart. Our work highlights that the effect of dopant not only is confined in the in-plane electrical transport behavior but also could be used to activate out-of-plane interaction between adjacent layers in tailoring the electrical transport of the bilayer transitional metal dichalcogenides, which may bring different applications in electronic and optoelectronic devices.

Behavior of the Energy Spectrum and Electric Conduction of Doped Graphene.

We consider the effect of atomic impurities on the energy spectrum and electrical conductance of graphene. As is known, the ordering of atomic impurities at the nodes of a crystal lattice modifies the graphene spectrum of energy, yielding a gap in it. Assuming a Fermi level within the gap domain, the electrical conductance diverges at the ordering of graphene. Hence, we can conclude about the presence of a metal-dielectric transition. On the other hand, for a Fermi level occurring outside of the gap, we see an increase in the electrical conductance as a function of the order parameter. The analytic formulas obtained in the Lifshitz one-electron strong-coupling model, describing the one-electron states of graphene doped with substitutional impurity atoms in the limiting case of weak scattering, are compared to the results of numerical calculations. To determine the dependence of the energy spectrum and electrical conductance on the order parameter, we consider both the limiting case of weak scattering and the case of finite scattering potential. The contributions of the scattering of electrons on a vapor of atoms to the density of states and the electrical conductance of graphene with an admixture of interstitial atoms are studied within numerical methods. It is shown that an increase in the electrical conductance with the order parameter is a result of both the growth of the density of states at the Fermi level and the time of relaxation of electron states. We have demonstrated the presence of a domain of localized extrinsic states on the edges of the energy gap arising at the ordering of atoms of the admixture. If the Fermi level falls in the indicated spectral regions, the electrical conductance of graphene is significantly affected by the scattering of electrons on clusters of two or more atoms, and the approximation of coherent potential fails in this case.

An Analytical Conductance Model for Gas Detection Based on a Zigzag Carbon Nanotube Sensor.

Recent advances in nanotechnology have revealed the superiority of nanocarbon species such as carbon nanotubes over other conventional materials for gas sensing applications. In this work, analytical modeling of the semiconducting zigzag carbon nanotube field-effect transistor (ZCNT-FET) based sensor for the detection of gas molecules is demonstrated. We propose new analytical models to strongly simulate and investigate the physical and electrical behavior of the ZCNT sensor in the presence of various gas molecules (CO2, H2O, and CH4). Therefore, we start with the modeling of the energy band structure by acquiring the new energy dispersion relation for the ZCNT and introducing the gas adsorption effects to the band structure model. Then, the electrical conductance of the ZCNT is modeled and formulated while the gas adsorption effect is considered in the conductance model. The band structure analysis indicates that, the semiconducting ZCNT experiences band gap variation after the adsorption of the gases. Furthermore, the bandgap variation influences the conductance of the ZCNT and the results exhibit increments of the ZCNT conductance in the presence of target gases while the minimum conductance shifted upward around the neutrality point. Besides, the I-V characteristics of the sensor are extracted from the conductance model and its variations after adsorption of different gas molecules are monitored and investigated. To verify the accuracy of the proposed models, the conductance model is compared with previous experimental and modeling data and a good consensus is observed. It can be concluded that the proposed analytical models can successfully be applied to predict sensor behavior against different gas molecules.

Significantly Improved Electrical Properties of Crosslinked Polyethylene Modified by UV-Initiated Grafting MAH.

Direct current (DC) electrical performances of crosslinked polyethylene (XLPE) have been evidently improved by developing graft modification technique with ultraviolet (UV) photon-initiation. Maleic anhydride (MAH) molecules with characteristic cyclic anhydride were successfully grafted to polyethylene molecules under UV irradiation, which can be efficiently realized in industrial cable production. The complying laws of electrical current varying with electric field and the Weibull statistics of dielectric breakdown strength at altered temperature for cable operation were analyzed to study the underlying mechanism of improving electrical insulation performances. Compared with pure XLPE, the appreciably decreased electrical conductivity and enhanced breakdown strength were achieved in XLPE-graft-MAH. The critical electric fields of the electrical conduction altering from ohm conductance to trap-limited mechanism significantly decrease with the increased testing temperature, which, however, can be remarkably raised by grafting MAH. At elevated temperatures, the dominant carrier transport mechanism of pure XLPE alters from Poole-Frenkel effect to Schottky injection, while and XLPE-graft-MAH materials persist in the electrical conductance dominated by Poole-Frenkel effect. The polar group of grafted MAH renders deep traps for charge carriers in XLPE-graft-MAH, and accordingly elevate the charge injection barrier and reduce charge mobility, resulting in the suppression of DC electrical conductance and the remarkable amelioration of insulation strength. The well agreement of experimental results with the quantum mechanics calculations suggests a prospective strategy of UV initiation for polar-molecule-grafting modification in the development of high-voltage DC cable materials.