Disodium Malate Electrolyte Additive Facilitates Dendrite-Free Zinc Anode: Deposition Kinetics and Interface Regulation.

Due to the presence of H2O within the solvated sheath of [Zn(H2O)6]2+ as well as reactive free water in the electrolyte bulk phase, the extended cycling of aqueous zinc-ion batteries (AZIBs) is significantly affected by detrimental side reactions and the growth of Zn dendrites. This study significantly enhances the long-term cycling stability of AZIBs by introducing a small amount of disodium malate (DM) into a 2 m ZnSO4 electrolyte solution. DM involvement in the solvation sheath of Zn2+ reduces the desolvation energy of Zn2+, thereby mitigating the corrosion and hydrogen evolution reaction (HER) of the negative electrode surface by [Zn(H2O)6]2+ ions. Additionally, DM adsorption on the zinc surface retards the reduction kinetics of Zn2+ at anode, promoting uniform distribution and predominant deposition on the flat (002) crystal plane, thus reducing dendrite formation. The assembled Zn||Zn symmetric cell exhibits stable cycling for over 500 h at 10 mA cm-2 and 5 mAh cm-2. The Zn||VO2 full cells with DM additive exhibits an ultralong cycling lifespan without capacity loss.

Ultra-Stable Aqueous Zinc Anodes: Enabling High-Performance Zinc-Ion Batteries via a ZnSiF6-Derived Protective Interphase.

Zinc-ion batteries (ZIBs) hold immense promise as next-generation energy storage solutions, however, the practical application of zinc anodes is hindered by dendrite formation and parasitic side reactions. Engineering a stable solid- eletrolyte interphase (SEI) is crucial for addressing these issues. This study proposes a novel strategy to enhance Zn anode performance by incorporating a ZnSiF6 additive into a standard ZnSO4 (ZSO) electrolyte. The ZnSiF6 additive facilitates the formation of a stable, fluorine-rich SEI on the Zn anode surface. Characterization reveals a hierarchical SEI structure, primarily composed of porous alkali zinc sulfate (ZHS) with embedded ZnF2. This unique architecture promotes rapid zinc ion desolvation and efficient transport, enhances corrosion resistance, and mitigates hydrogen evolution. Consequently, ZnSiF6-modified cells exhibit exceptional cycling stability, exceeding 3000 hours at 0.5 mA cm-2 and 560 hours at 10 mA cm-2, significantly outperforming ZSO-based cells. The modified cells also achieve high areal capacities (10 mAh cm-2), indicating superior zinc utilization. This work provides key insights for designing stable electrode/electrolyte interfaces, contributing to the development of high-performance aqueous ZIBs.

Toward the Rechargeable Aqueous Zinc Ion Batteries with Improved Overall Performance: Electrolyte with Surface Adsorptive Additive.

Aqueous zinc-ion batteries (AZIBs) with slightly acidic electrolytes process advantages such as high safety, competitive cost, and satisfactory electrochemical performance. However, the failure behaviors of both electrodes, regarding zinc dendrite growth, interfacial parasitic reactions, and the collapse of cathode materials hinder the practical application of ZIBs. To alleviate the issues of both anode and cathode at the same time, D-xylose (DX) is introduced to the electrolyte as a multifunctional additive. As a result, the side reaction of the anode is suppressed and the metallic deposition behavior is regulated due to the hydrogen bonding network reconstruction and preferential surface adsorption of DX; for the MnO2 cathode, the DX adsorption can help the interfacial charge transfer and increase the reactive sites. Benefiting from these merits, DX-optimized Zn//Zn battery displays reveal a prolonged lifespan of 6912 h and an ultra-high cumulative capacity of 17.28 Ah cm-2 at 5 mA cm-2. With the function of water reactivity suppression, the Coulombic efficiency reaches 99.91% at 2 mA cm-2; the Zn||MnO2 full batteries exhibit excellent cyclability over 2000 cycles at 5C with an increased capacity of 118.9 mAh g-1, indicating the dual functions to both of the electrodes for AZIBs.

Synergistically Boosting Li Storage Performance of MnWO4 Nanorods Anode via Carbon Coating and Additives.

Polyanionic structures, (MO4)n-, can be beneficial to the transport of lithium ions by virtue of the open three-dimensional frame structure. However, an unstable interface suppresses the life of the (MO4)n--based anode. In this study, MnWO4@C nanorods with dense nanocavities have been synthesized through a hydrothermal route, followed by a chemical deposition method. As a result, the MnWO4@C anode exhibits better cycle and rate performance than MnWO4 as a Li-ion battery; the capacity is maintained at 718 mAh g-1 at 1000 mA g-1 after 400 cycles because the transport of lithium ions and the contribution of pseudo-capacitance are increased. Generally, benefiting from the carbon shell and electrolyte additive (e.g., FEC), the cycle performance of the MnWO4@C electrode is also effectively improved for lithium storage.

Pyrrolic-Nitrogen Chemistry in 1-(2-hydroxyethyl)imidazole Electrolyte Additives toward a 50,000-Cycle-Life Aqueous Zinc-Iodine Battery.

Rechargeable aqueous zinc iodine (Zn-I2) batteries offer benefits such as low cost and high safety. Nevertheless, their commercial application is hindered by hydrogen evolution reaction (HER) and polyiodide shuttle, which result in a short lifespan. In this study, 1-(2-hydroxyethyl)imidazole (HEI) organic molecules featuring pyrrole-N groups are introduced as dually-functional electrolyte additives to simultaneously stabilize Zn anode and confine polyiodide through ion-dipole interactions. The pyrrole-N groups in HEI can preserve the interfacial pH equilibrium at Zn anode by reversibly capturing H+ ions and dynamically neutralizing OH- ions, thereby suppressing the HER. Notably, the H2 evolution rate at the Zn anode is reduced to a mere 2.20 µmol h-1 cm-2. Furthermore, the pyrrole-N moieties in HEI effectively curtail the polyiodide shuttle at I2 cathode, which show adsorption energies of -0.174 eV for I2, -0.521 eV for I3-, and -0.768 eV for I-, as indicated by density functional theory calculations. Electrochemical testing demonstrates that the Zn//Zn symmetric cell maintains stable cycling for up to 4,200 hours at 1 mA cm-2. Most strikingly, at a high I2 mass loading of 9.7 mg cm-2, the Zn-I2 battery achieves an extraordinary cycle life of 50,000 cycles.

Electrical Double Layer and In Situ Polymerization SEI Enables High Reversible Zinc Metal Anode.

Aqueous zinc-ion batteries (AZIBs) stand out among new energy storage devices due to their excellent safety and environmental friendliness. However, the formation of dendrites and side reactions on the zinc metal anode during cycling have become the major obstacles to their commercialization. This study innovatively selected Sodium 4-vinylbenzenesulfonate (VBS) as a multifunctional electrolyte additive to address the issues. The dissociated VBS- anions can not only significantly alter the hydrogen bond network structure of H2O in the electrolyte, but also preferentially adsorb on the surface of the zinc anode before H2O molecules, which will result in the development of organic anion-rich interface and alterations to the electrical double layer (EDL) structure. Furthermore, the ─C═C─ structure in VBS leads to the formation of an in situ polymerized organic anion solid electrolyte interface (SEI) layer that adheres to the surface of the zinc anode. The mechanisms work together to significantly improve the performance of Zn//Zn symmetric batteries, achieving a cycle life of over 1800 h at 1 mA cm-2 and 1 mAh cm-2. The introduction of VBS also enhances the cycling performance and capacity of Zn//δ-MnO2 full cells. This study provides a low-cost solution for the development of AZIBs.

Bidirectional pH Buffer Effect Facilitates High-Reversible Aqueous Zinc Ion Batteries.

Aqueous zinc ion batteries (AZIBs) stand out from the crowd of energy storage equipment for their superior energy density, enhanced safety features, and affordability. However, the notorious side reaction in the zinc anode and the dissolution of the cathode materials led to poor cycling stability has hindered their further development. Herein, ammonium salicylate (AS) is a bidirectional electrolyte additive to promote prolonged stable cycles in AZIBs. NH4 + and C6H4OHCOO- collaboratively stabilize the pH at the interface of the electrolyte/electrode and guide the homogeneous deposition of Zn2+ at the zinc anode. The higher adsorption energy of NH4 + compared to H2O on the Zn (002) crystal plane mitigates the side reactions on the anode surface. Moreover, NH4 + is similarly adsorbed on the cathode surface, maintaining the stability of the electrode. C6H4OHCOO- and Zn2+ are co-intercalation/deintercalation during the cycling process, contributing to the higher electrochemical performance of the full cell. As a result, with the presence of AS additive, the Zn//Zn symmetric cells achieved 700 h of highly reversible cycling at 5 mA cm-2. In addition, the assembled NH4V4O10(NVO)//Zn coin and pouch batteries achieved higher capacity and higher cycle lifetime, demonstrating the practicality of the AS electrolyte additive.

Dual-Functional Interfacial Layer Enabled by Gating-Shielding Effects for Ultra-Stable Zn Anode.

Large-scale application of low-cost, high-safety and environment-compatible aqueous Zn metal batteries (ZMBs) is hindered by Zn dendrite failure and side reactions. Herein, highly reversible ZMBs are obtained by addition of trace D-pantothenate calcium additives to engineer a dual-functional interfacial layer, which is enabled by a bioinspired gating effect for excluding competitive free water near Zn surface due to the trapping and immobilization of water by hydroxyl groups, and guiding target Zn2+ transport across interface through carboxyl groups of pantothenate anions, as well as a dynamic electrostatic shielding effect around Zn protuberances from Ca2+ cations to ensure uniform Zn2+ deposition. In consequence, interfacial side reactions are perfectly inhibited owing to reduced water molecules reaching Zn surface, and the uniform and compact deposition of Zn2+ is achieved due to promoted Zn2+ transport and deposition kinetics. The ultra-stable symmetric cells with beyond 9000 h at 0.5 mA cm-2 with 0.5 mAh cm-2 and over 5000 h at 5 mA cm-2 with 1 mAh cm-2, and an average Coulombic efficiency of 99.8% at 1 mA cm-2 with 1 mAh cm-2, are amazingly realized. The regulated-electrolyte demonstrates high compatibility with verified cathodes for stable full cells. This work opens a brand-new pathway to regulate Zn/electrolyte interface to promise reversible ZMBs.

Trace alcohol ether electrolytes with dual-site hydrogen bonds and modulated solvation structures for ultralong-life zinc-ion batteries.

Aqueous zinc-ion batteries (AZIBs) are highly regarded for their affordability, stability, safety, and eco-friendliness. Nevertheless, their practical application is hindered by severe side reactions and the formation of zinc (Zn) dendrites on the Zn metal anode surface. In this study, we employ tetrahydrofuran alcohol (THFA), an efficient and cost-effective alcohol ether electrolyte, to mitigate these issues and achieve ultralong-life AZIBs. Theoretical calculations and experimental findings demonstrate that THFA acts as both a hydrogen bonding donor and acceptor, effectively anchoring H2O molecules through dual-site hydrogen bonding. This mechanism restricts the activity of free water molecules. Moreover, the two oxygen (O) atoms in THFA serve as dual solvation sites, enhancing the desolvation kinetics of [Zn(H2O)6]2+ and improving the deposition dynamics of Zn2+ ions. As a result, even trace amounts of THFA significantly suppress adverse reactions and the formation of Zn dendrites, enabling highly reversible Zn metal anodes for ultralong-life AZIBs. Specifically, a Zn-based symmetric cell containing 2 % THFA achieves an ultralong cycle life of 8,800 h at 0.5 mA cm-2/0.5 mAh cm-2, while a Zn//VO2 full cell containing 2 % THFA maintains a remarkable 80.03 % capacity retention rate at 5 A g-1 over 2,000 cycles. This study presents a practical strategy to develop dendrite-free, cost-effective, and highly efficient aqueous energy storage systems by leveraging alcohol ether compounds with dual-site hydrogen bonding capabilities.

Manipulation of Zn Deposition Behavior to Achieve High-Rate Aqueous Zinc Batteries via High Valence Zirconium Ions.

Aqueous zinc ion batteries are excellent energy storage devices with high safety and low cost. However, the corrosion reaction and zinc dendrite formation occurring on the surface of zinc anodes are hindering their further development. To solve the problems, zirconium acetate (ZA) was used as an electrolyte additive in the ZnSO4 electrolyte. Attributing to the higher electro-positivity of Zr4+ than Zn2+, these high valence metal cations preferentially adsorb onto the surface of metallic zinc, shielding parasitic reactions between zinc and electrolyte, reshaping the electric field distribution, and directing preferential homogeneous deposition of Zn-ions on the Zn (002) crystal plane. Furthermore, the adsorption of Zr4+ on the Zn metal after electrochemical cycles can enhance the energy barrier of zinc atom diffusion, resulting in high resistance of corrosion and manipulation of the Zn2+ nucleation configuration. Attributing to these properties, the Zn//Zn symmetric cell with an electrolyte additive of ZA was able to cycle for 400 h under an extremely high current density of 40 mA cm-2 with an area capacity of 2 mAh cm-2. Meanwhile, the MnO2//Zn coin cell still had 81.7 mAh g-1 (85% retention of capacity) after 850 cycles under a current density of 1 A g-1.

Decoupling "Cling-Cover-Capture" Triple Effects on Stable Zn Anode/Electrolyte Interface.

The electrochemical performance of the Zn anode in a water-based electrolyte is influenced by the Zn anode/electrolyte interface. In the present work, a distinctive interfacial chemistry is enabled by introducing synergistic "cling-cover-capture" effects of different components in aspartame (APM) molecule, which can be described in detail as clinging to the surface of Zn anode by incompletely coordinated nitrogen and oxygen atoms in the main chain, covering the surface by the benzene rings and capturing Zn2+ by the side chains. Benefiting from its triple effects, this steady anode/electrolyte interface homogenizes Zn2+ flux and excludes interfacial active water, thus effectively suppressing both dendrite growth and side reactions. Consequently, the stability and reversibility of Zn anode experience an enhancement, leading to a long cycle lifespan of 5100 h at 1 mA cm-2 and 1 mA h cm-2, and an average Coulombic efficiency of 99.73% at 1 mA cm-2 and 0.5 mA h cm-2 over 1600 cycles. The improved rate capability and cycling durability of Zn||NH4V4O10 full cells further confirm the important role of APM in stabilizing the Zn anode.

Electrolyte Additive Molecule Disassembly to Reveal the Roles of Individual Groups in Zn Electrode Stabilities in Aqueous Batteries.

Zn metal anodes experience dendritic growth and hydrogen evolution reactions (HER) in aqueous batteries. Herein, we propose an interface regulation strategy with a trace (1.4 × 10-4 mol kg-1) all-in-one epicatechin (EC) electrolyte additive to solve the above issues and reveal the roles of individual functional groups. By the disassembly of EC into simple molecules combined with entire molecule investigations, we show that phenol and ether sites preferentially anchor on the Zn surface, while the hydroxyl group pointing outward enters Zn2+ solvation shells at the interface. It modifies the following desolvation path, which not only enables uniform deposition with the thermodynamically favored plate morphology but also inhibits HER. With these synergistic effects of trace EC additive, the lifespan of symmetric cells extends to 8.5 times that of the baseline ZnSO4 electrolyte. The capacity retention of Zn//MnO2 full batteries with N/P = 3 also increases from 59.1 to 85.6% after 500 cycles.

Rational design of epoxy functionalized ionic liquids electrolyte additive for hydrogen-free and dendrite-free aqueous zinc batteries.

Despite the high safety and low cost associated with aqueous Zn-ion batteries (ZIBs), uncontrolled Zn dendrite growth and parasitic reactions induced by water significantly diminish their stability. Herein, a new epoxy functionalized ionic liquid, 4-methyl-4-glycidylmorpholin bis[(trifluoromethyl)sulfonyl]imide (MGM[TFSI]), has been developed to mitigate water reactivity for stable ZIBs. It was found that the MGM+ cation disrupts the hydrogen bond network of water, hindering its adsorption on Zn anodes, thereby suppressing water decomposition and enhancing anode stability. Additionally, preferential adsorption of MGM+ cations on the Zn anode surface mitigates tip effects, suppresses dendrite growth, and promotes the formation of a ZnF2 solid electrolyte interphase layer, effectively isolating the anode from the bulk electrolyte. As a result, benefiting from the well-designed MGM+-based electrolyte, Zn//Zn cells achieve significantly enhanced cycling stability, lasting over 2000 h at 1 mA cm-2 with 1 mAh cm-2. Furthermore, Zn//MnO2 full cells deliver remarkable stability, retaining approximately 89 % of their initial capacity after 3000 cycles at 5 A/g. This work proposes that the MGM[TFSI] additive can effectively regulate the interfacial chemistry of the Zn anode, providing an opportunity to design advanced electrolytes for highly reversible ZIBs and beyond.

A Novel 4-Fluorophenyl Isocyanate Additive Constructing Solid Cathodes-Electrolyte Interface for High-Performance Lithium-Ion Batteries.

Building a stable cathode-electrolyte interface (CEI) is crucial for achieving high-performance layered metal oxide cathode materials LiNixCoyMn1-x-yO2 (NCM). In this work, a novel 4-fluorobenzene isocyanate (4-FBC) electrolyte additive that contains isocyanate and benzene ring functional groups is proposed, which can form robust and homogeneous N-rich and benzene ring skeleton CEI film on the cathode surface, leading to significant improvement in the electrochemical performance of lithium-ion batteries. Taking LiNi0.5Co0.2Mn0.3O2 (NCM523) as an example, the NCM523/SiO@Graphite pouch full cells with electrolytes containing a mass fraction of 1% 4-FBC additives demonstrate improved capacity retention after 200 cycles, retaining capacity retention rates of 81.3%, which is much higher than that of 39.1% without additive. The improvement can be ascribed to the mitigation of electrolyte decomposition and inhibition of transition metal ions the dissolution from the cathode material due to the stable CEI film. Moreover, the electrochemical performance enhancement can also be achieved in high voltage and Ni-rich cathode materials, indicating the universality and effectiveness of this strategy for the practical applications of high energy density lithium-ion batteries.

Promoting Preferential Zn (002) Deposition with a Low-Concentration Electrolyte Additive for Highly Reversible Zn-Ion Batteries.

Aqueous zinc-ion batteries have promising potential as energy storage devices due to their low cost and environmental friendliness. However, their development has been hindered by zinc dendrite formation and parasitic side reactions. Herein, we introduce a low-concentration sodium benzoate (NaBZ) electrolyte additive to stabilize the electrode-electrolyte interface and promote deposition on the Zn (002) crystal plane. From experimental characterization and computational analyses, NaBZ was found to adsorb on the Zn surface and inhibit side reactions while guiding homogeneous Zn deposition on the (002) plane. Consequently, Zn|Zn symmetric cells with the NaBZ additive cycled stably for over 1000 h at a current density of 0.5 mA cm-2 and an areal capacity of 0.5 mAh cm-2, while Zn|Cu cells showed excellent reversibility with a Coulombic efficiency of 99.05%. Moreover, Zn|Na0.33V2O5 full cells achieve a high specific capacity of 124 mAh g-1 while cycling for 600 h at 2 A g-1. These findings present a low-cost electrolyte modification strategy for reversible zinc-ion batteries.

High-Entropy-Inspired Multicomponent Electrical Double Layer Structure Design for Stable Zinc Metal Anodes.

Regulating the electrical double layer (EDL) structure can enhance the cycling stability of Zn metal anodes, however, the effectiveness of this strategy is significantly limited by individual additives. Inspired by the high-entropy (HE) concept, we developed a multicomponent (MC) EDL structure composed of La3+, Cl-, and BBI anions by adding dibenzenesulfonimide (BBI) and LaCl3 additives into ZnSO4 electrolytes (BBI/LaCl3/ZnSO4). Specifically, La3+ ions accumulate within EDL to shield the net charges on the Zn surface, allowing more BBI anions and Cl- ions to enter this region. Consequently, this unique MC EDL enables Zn anodes to simultaneously achieve uniform electric field, robust SEI layer, and balanced reaction kinetics. Moreover, the synergistic parameter - a novel descriptor for quantifying collaborative improvement - was first proposed to demonstrates the synergistic effect between BBI and LaCl3 additives. Benefitting from these advantages, Zn metal anodes achieved a high reversibility of 99.5 % at a depth of discharge (DoD) of 51.3 %, and Zn|MnO2 pouch cells exhibited a stable cycle life of 100 cycles at a low N/P ratio of 2.9.

Constructing Cyclic Hydrogen Bonding to Suppress Side Reactions and Dendrite Formation on Zinc Anodes.

The high electrochemical reactivity of H2O molecules and zinc metal results in severe side reactions and dendrite formation on zinc anodes. Here we demonstrate that these issues can be addressed by using N-hydroxymethylacetamide (NHA) as additives in 2 M ZnSO4 electrolytes. The addition of NHA molecules, acting as both a hydrogen bond donor and acceptor, enables the formation of cyclic hydrogen bonding with H2O molecules. This interaction disrupts the existing hydrogen bonding networks between H2O molecules, hindering proton transport, and containing H2O molecules within the cyclic hydrogen bonding structure to prevent deprotonation. Additionally, NHA molecules show a preference for adsorption on the (101) crystal surface of zinc metal. This preferential adsorption reduces the surface energy of the (101) plane, facilitating the homogeneous Zn deposition along the (101) direction. Thus, the NHA enables Zn||Zn symmetric cell with a cycle lifespan of 1100 hours at 5 mA cm-2 and Zn||Cu asymmetric cell with a high Coulombic efficiency over 99.5 %. Moreover, the NHA-modified Zn||AC zinc ion hybrid capacitor is capable of sustaining 15000 cycles at 2 A g-1. This electrolyte additive engineering presents a promising strategy to enhance the performance and broaden the application potential of zinc metal-based energy storage devices.

Sieving-type Electric Double Layer with Hydrogen Bond Interlocking to Stable Zinc Metal Anode.

The stability of aqueous zinc metal batteries is significantly affected by side reactions and dendrite growth on the anode interface, which primarily originate from water and anions. Herein, we introduce a multi H-bond site additive, 2, 2'-Sulfonyldiethanol (SDE), into an aqueous electrolyte to construct a sieving-type electric double layer (EDL) by hydrogen bond interlock in order to address these issues. On the one hand, SDE replaces H2O and SO4 2- anions that are adsorbed on the zinc anode surface, expelling H2O/SO4 2- from the EDL and thereby reducing the content of H2O/SO4 2- at the interface. On the other hand, when Zn2+ are de-solvated at the interface during the plating, the strong hydrogen bond interaction between SDE and H2O/SO4 2- can trap H2O/SO4 2- from the EDL, further decreasing their content at the interface. This effectively sieves them out of the zinc anode interface and inhibits the side reactions. Moreover, the unique characteristics of trapped SO4 2- anions can restrict their diffusion, thereby enhancing the transference number of Zn2+ and promoting dendrite-free deposition and growth of Zn. Consequently, utilizing an SDE/ZnSO4 electrolyte enables excellent cycling stability in Zn//Zn symmetrical cells and Zn//MnO2 full cells with lifespans exceeding 3500 h and 2500 cycles respectively.

Integrated Interfacial Modulation Strategy: Trace Sodium Hydroxyethyl Sulfonate Additive for Extended-Life Zn Anode Based on Anion Adsorption and Electrostatic Shield.

Aqueous zinc-ion batteries (AZIBs) are poised to play a pivotal part in meeting the growing demands for energy storage and powering portable electronics for their superior security, affordability, and environmentally friendly characteristics. However, the detrimental side reactions occurring at the zinc anode and the dendrite caused by uneven zinc plating/stripping have greatly compromised the cycling life of AZIBs, thereby impeding their practical prospects. In this study, the interfacial comodulation strategy was employed by combining the "electrostatic shielding" effect of cations with the characteristic adsorption of anions. Two molar ZnSO4 served as the matrix, and sodium hydroxyethyl sulfonate (SHES) was selected as a low-cost, nontoxic additive. Experimental results confirm that SHES and zinc anode exhibit robust interactions that lead to the formation of an electrostatic shield and a dynamic adsorption layer at the interface, thereby suppressing hydrogen evolution and corrosion. The combined "electrostatic shielding" effect of sodium ions and the robust characteristic adsorption of hydroxyethyl sulfonate anions serve to guide the directed three-dimensional (3D) diffusion of Zn2+, facilitating rapid, stable, and uniform deposition of zinc. Due to these effects, incorporating 0.2 M SHES as an additive extends the cycle life beyond 3600 h and enables a highly reversible process of deposition and stripping in symmetric cells. Additionally, the Zn-Cu half-cell exhibits reliable cycling for over 1400 cycles, achieving an average Coulombic efficiency of 99.6%. Moreover, the introduction of this additive substantially enhances the performance of Zn-MnO2 and Zn-NH4V4O10 full cells. This study demonstrates the practical feasibility of achieving anodes with high reversibility in AZIBs through the implementation of a strategy that involves anion adsorption at the interface, which holds paramount significance for the practical application of AZIBs.

Asymmetrical Functionalization of Polarizable Interface Restructuring Molecules for Rapid and Longer Operative Lithium Metal Batteries.

Lithium metal batteries (LMBs) have been recognized as high-energy storage alternatives; however, problematic surface reactions due to dendritic Li growth are major obstacles to their widespread utilization. Herein, a 3-mercapto-1-propanesulfonic acid sodium salt (MPS) with asymmetrically functionalized thiol and sulfonate groups as polarizable interface-restructuring molecules is proposed to achieve rapid and longer-operating LMBs. Under a harsh condition of 5 mA cm-2, Li-Li symmetric cells employing MPS can be cycled over 1200 cycles, outperforming those employing other molecules symmetrically functionalized by thiol or sulfonate groups. The improved performance of the Li|V2O5 full cell is demonstrated by introducing MPS additives. MPS additives offer advantages by flattening the surface, reconfiguring Li nucleation and growth along the stable (110) plane, and forming a durable and conductive solid-electrolyte interface layer (SEI). This study suggests an effective way to develop a new class of electrolyte additives for LMBs by controlling engineering factors, such as functional groups and polarizable properties.