CRISPR-Cas guide RNA indel analysis using CRISPResso2 with Nanopore sequencing data.

OBJECTIVE: Insertion and deletion (indel) analysis of CRISPR-Cas guide RNAs (gRNAs) is crucial in gene editing to assess gRNA efficiency and indel frequency. This study evaluates the utility of CRISPResso2 with Oxford Nanopore sequencing data (nCRISPResso2) for gRNA indel screening, compared to two common Sanger sequencing-based methods, TIDE and ICE. To achieve this, sheep and horse fibroblasts were transfected with Cas9 and a gRNA targeting the myostatin (MSTN) gene. DNA was subsequently extracted, and PCR products exceeding 600 bp were sequenced using both Sanger and Nanopore sequencing. Indel profiling was then conducted using TIDE, ICE, and nCRISPResso2. RESULTS: Comparison revealed close correspondence in indel formation among methods. For the sheep MSTN gRNA, indel percentages were 52%, 58%, and 64% for TIDE, ICE, and nCRISPResso2, respectively. Horse MSTN gRNA showed 81%, 87%, and 86% edited amplicons for TIDE, ICE, and nCRISPResso2. The frequency of each type of indel was also comparable among the three methods, with nCRISPResso2 and ICE aligning the closest. nCRISPResso2 offers a viable alternative for CRISPR-Cas gRNA indel screening, especially with large amplicons unsuitable for Illumina sequencing. CRISPResso2's compatibility with Nanopore data enables cost-effective and efficient indel profiling, yielding results comparable to common Sanger sequencing-based methods.

CRISPR/Cas9 System with Dual gRNAs Synergically Inhibit Hepatitis B Virus Replication.

BACKGROUND: In recent years, a gene-editing technology known as clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 has been developed and is progressively advancing into clinical trials. While current antiviral therapies are unable to eliminate the Hepatitis B virus (HBV), it stands as a prime target for the CRISPR/Cas9 technology. The objective of this study was to enhance the efficacy of CRISPR/Cas9 in suppressing HBV replication, lowering HBsAg and HBeAg levels, and eliminating covalently closed circular DNA (cccDNA). METHODS: To enhance the anti-HBV effectiveness of CRISPR/Cas9, our study delved into a dual-guide RNA (gRNA) strategy. After evaluating the antiviral activities of multiple gRNAs that effectively impeded HBV replication, we identified three specific gRNAs-namely 10, 4, and 21. These gRNAs were selected for their targeting of distinct yet conserved regions within the HBV genome. RESULTS: In HBV-stable cell lines, namely HepAD38, and HBV infection models of HepG2-NTCP cells, our investigation revealed that the co-application of gRNA-10 with either gRNA-4 or gRNA-21 within the CRISPR/Cas9 system demonstrated heightened efficacy in impeding HBV replication, reducing the levels of HBsAg, HBeAg, and cccDNA levels, along with a more pronounced promotion of HBsAg clearance when compared to the use of a single gRNA. CONCLUSIONS: The CRISPR/Cas9 system employing dual gRNAs has proven highly effective in both suppressing HBV replication and facilitating HBsAg clearance. This promising outcome suggests that it holds potential to emerge as a novel approach for achieving the functional cure of patients with HBV infection.

Compartmentalized CRISPR Reactions (CCR) for High-Throughput Screening of Guide RNA Potency and Specificity.

CRISPR ribonucleoproteins (RNPs) use a variable segment in their guide RNA (gRNA) called a spacer to determine the DNA sequence at which the effector protein will exhibit nuclease activity and generate target-specific genetic mutations. However, nuclease activity with different gRNAs can vary considerably in a spacer sequence-dependent manner that can be difficult to predict. While computational tools are helpful in predicting a CRISPR effector's activity and/or potential for off-target mutagenesis with different gRNAs, individual gRNAs must still be validated in vitro prior to their use. Here, the study presents compartmentalized CRISPR reactions (CCR) for screening large numbers of spacer/target/off-target combinations simultaneously in vitro for both CRISPR effector activity and specificity by confining the complete CRISPR reaction of gRNA transcription, RNP formation, and CRISPR target cleavage within individual water-in-oil microemulsions. With CCR, large numbers of the candidate gRNAs (output by computational design tools) can be immediately validated in parallel, and the study shows that CCR can be used to screen hundreds of thousands of extended gRNA (x-gRNAs) variants that can completely block cleavage at off-target sequences while maintaining high levels of on-target activity. It is expected that CCR can help to streamline the gRNA generation and validation processes for applications in biological and biomedical research.

HIV-1 Gag Compact form Stabilized by Intramolecular Interactions is Crucial for Infectious Particle Production.

HIV-1 Gag polyprotein plays a pivotal role in assembly and budding of new particles, by specifically packaging two copies of viral gRNA in the host cell cytoplasm and selecting the cell plasma membrane for budding. Both gRNA and membrane selections are thought to be mediated by the compact form of Gag. This compact form binds to gRNA through both its matrix (MA) and nucleocapsid (NC) domains in the cytoplasm. At the plasma membrane, the membrane competes with gRNA for Gag binding, resulting in a transition to the extended form of Gag found in immature particles with MA bound to membrane lipids and NC to gRNA. The Gag compact form was previously evidenced in vitro. Here, we demonstrated the compact form of Gag in cells by confocal microscopy, using a bimolecular fluorescence complementation approach with a split-GFP bipartite system. Using wild-type Gag and Gag mutants, we showed that the compact form is highly dependent on the binding of MA and NC domains to RNA, as well as on interactions between MA and CA domains. In contrast, Gag multimerization appears to be less critical for the accumulation of the compact form. Finally, mutations altering the formation of Gag compact form led to a strong reduction in viral particle production and infectivity, revealing its key role in the production of infectious viral particles.

Characterization and Engineering of a Novel Miniature Eubacterium siraeum CRISPR-Cas12f System.

Cas12f nucleases are one of the most compact genome editors, exhibiting promising potential for in vivo therapeutic applications. However, the availability of active Cas12f genome editors remains relatively limited in the field. Here, we report the characterization and engineering of a novel miniature Cas12f endonuclease from Eubacterium siraeum (EsCas12f1, 433 amino acids). We elucidate the specific Protospacer Adjacent Motifs preference and the detailed biochemical properties for DNA targeting and cleavage. By employing rational design strategies, we systematically optimize the guide RNA of EsCas12f1, converting the initially ineffective CRISPR-EsCas12f1 system into an efficient bacterial genome editor. Furthermore, we demonstrate the capacity of EsCas12f1 for in vitro nucleic-acid diagnostics. In summary, our results enrich the miniature CRISPR-Cas toolbox and pave the way for the application of EsCas12f1 for both genome editing and in vitro diagnostics.

Graded-CRISPRi, a Tool for Tuning the Strengths of CRISPRi-Mediated Knockdowns in Vibrio natriegens Using gRNA Libraries.

In recent years, the fast-growing bacterium Vibrio natriegens has gained increasing attention as it has the potential to become a next-generation chassis for synthetic biology. A wide range of genetic parts and genome engineering methods have already been developed. However, there is still a need for a well-characterized tool to effectively and gradually reduce the expression levels of native genes. To bridge this gap, we created graded-CRISPRi, a system utilizing gRNA variants that lead to varying levels of repression strength. By incorporating multiple gRNA sequences into our design, we successfully extended this concept to simultaneously repress four distinct reporter genes. Furthermore, we demonstrated the capability of using graded-CRISPRi to target native genes, thereby examining the effect of various knockdown levels on growth.

Molecular identification of Proteus mirabilis, Vibrio species leading to CRISPR-Cas9 modification of tcpA and UreC genes causing cholera and UTI.

Heavy metal accumulation increases rapidly in the environment due to anthropogenic activities and industrialization. The leather and surgical industry produces many contaminants containing heavy metals. Cadmium, a prominent contaminant, is linked to severe health risks, notably kidney and liver damage, especially among individuals exposed to contaminated wastewater. This study aims to leverage the natural cadmium resistance mechanisms in bacteria for bioaccumulation purposes. The industrial wastewater samples, characterized by an alarming cadmium concentration of 29.6 ppm, 52 ppm, and 76.4 ppm-far exceeding the recommended limit of 0.003 ppm-were subjected to screening for cadmium-resistant bacteria using cadmium-supplemented media with CdCl2. 16S rRNA characterization identified Vibrio cholerae and Proteus mirabilis as cadmium-resistant bacteria in the collected samples. Subsequently, the cadmium resistance-associated cadA gene was successfully amplified in Vibrio species and Proteus mirabilis, revealing a product size of 623 bp. Further analysis of the identified bacteria included the examination of virulent genes, specifically the tcpA gene (472 bp) associated with cholera and the UreC gene (317 bp) linked to urinary tract infections. To enhance the bioaccumulation of cadmium, the study proposes the potential suppression of virulent gene expression through in-silico gene-editing tools such as CRISPR-Cas9. A total of 27 gRNAs were generated for UreC, with five selected for expression. Similarly, 42 gRNA sequences were generated for tcpA, with eight chosen for expression analysis. The selected gRNAs were integrated into the lentiCRISPR v2 expression vector. This strategic approach aims to facilitate precise gene editing of disease-causing genes (tcpA and UreC) within the bacterial genome. In conclusion, this study underscores the potential utility of Vibrio species and Proteus mirabilis as effective candidates for the removal of cadmium from industrial wastewater, offering insights for future environmental remediation strategies.

Multiplexed gene editing in citrus by using a multi-intron containing Cas9 gene.

Several expression systems have been developed in clustered regularly interspaced short palindromic repeats (CRISPR)-associated protein 9 (CRISPR/Cas9) framework allowing for gene editing of disease-associated genes across diverse citrus varieties. In this study, we present a new approach employing a multi-intron containing Cas9 gene plus multiple gRNAs separated with tRNA sequences to target the phytoene desaturase gene in both 'Carrizo' citrange and 'Duncan' grapefruit. Notably, using this unified vector significantly boosted editing efficiency in both citrus varieties, showcasing mutations in all three designated targets. The implementation of this multiplex gene editing system with a multi-intron-containing Cas9 plus a gRNA-tRNA array demonstrates a promising avenue for efficient citrus genome editing, equipping us with potent tools in the ongoing battle against several diseases such as canker and huanglongbing.

Breeding rice for yield improvement through CRISPR/Cas9 genome editing method: current technologies and examples.

The impending climate change is threatening the rice productivity of the Asian subcontinent as instances of crop failures due to adverse abiotic and biotic stress factors are becoming common occurrences. CRISPR-Cas9 mediated genome editing offers a potential solution for improving rice yield as well as its stress adaptation. This technology allows modification of plant's genetic elements and is not dependent on foreign DNA/gene insertion for incorporating a particular trait. In this review, we have discussed various CRISPR-Cas9 mediated genome editing tools for gene knockout, gene knock-in, simultaneously disrupting multiple genes by multiplexing, base editing and prime editing the genes. The review here also presents how these genome editing technologies have been employed to improve rice productivity by directly targeting the yield related genes or by indirectly manipulating various abiotic and biotic stress responsive genes. Lately, many countries treat genome-edited crops as non-GMOs because of the absence of foreign DNA in the final product. Thus, genome edited rice plants with improved yield attributes and stress resilience are expected to be accepted by the public and solve food crisis of a major portion of the globe. Supplementary Information: The online version contains supplementary material available at 10.1007/s12298-024-01423-y.

A Comprehensive Protocol for Assembly of Multiple gRNAs into a Direct Vector for Genome Editing in Tomato.

The Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-Cas 9 (CRISPR-associated protein 9) is a robust DNA-encoded, RNA-mediated sequence-specific nuclease system widely used for genome editing of various plants. Although there are many reports on the assembly of gRNAs and plant transformation, there is no single resource for the complete gene editing methodology in tomato. This chapter provides a comprehensive protocol for designing gRNAs, their assembly into the vector, plant transformation, and final mutant analysis in tomato.

In Silico Design of gRNA for CRISPR/Cas9-Mediated Gene Knockout.

CRISPR/Cas9 stands as a revolutionary and versatile gene editing technology. At its core, the Cas9 DNA endonuclease is guided with precision by a specifically designed single-guide RNA (gRNA). This guidance system facilitates the introduction of double-stranded breaks (DSBs) within the DNA. Subsequent imprecise repairs, mainly through the non-homologous end-joining (NHEJ) pathway, yield insertions or deletions, resulting in frameshift mutations. These mutations are instrumental in achieving the successful knockout of the target gene. In this chapter, we describe all necessary steps to create and design a gRNA for a gene knockout to a target gene before to transfer it to a target plant.

CRISPR/Cas9 Vector Construction for Gene Knockout.

This protocol outlines the construction of a plant transformation plasmid to express both the Cas9 nuclease and individual guide RNA (gRNA), facilitating the induction of double-stranded breaks (DSBs) in DNA and subsequent imprecise repair via the non-homologous end-joining (NHEJ) pathway. The gRNA expression cassettes are assembled from three components. First, the Medicago truncatula U6.6 (MtU6) promoter (352 bp) and scaffold (83 bp) sequences are amplified from a pUC-based plasmid. Additionally, a third fragment, corresponding to the target sequence, is synthesized as an oligonucleotide. The three gRNA expression fragments are then loosely assembled in a ligation-free cloning reaction and used as a template for an additional PCR step to amplify a single gRNA expression construct, ready for assembly into the transformation vector. The benefits of this design include cost efficiency, as subsequent cloning reactions only require 59 oligonucleotides and standard cloning reagents. Researchers engaged in CRISPR/Cas9-mediated genome editing in plants will find this protocol a clear and resource-efficient approach to create transformation plasmids for their experiments.

Precision Genome Editing with CRISPR-Cas9.

The CRISPR/Cas9 system is a revolutionary technology for genome editing that allows for precise and efficient modifications of DNA sequences. The system is composed of two main components, the Cas9 enzyme and a guide RNA (gRNA). The gRNA is designed to specifically target a desired DNA sequence, while the Cas9 enzyme acts as molecular scissors to cut the DNA at that specific location. The cell then repairs the digested DNA, either through nonhomologous end joining (NHEJ) or homology-directed repair (HDR), resulting in either indels or precise modifications of DNA sequences with broad implications in biotechnology, agriculture, and medicine. This chapter provides a practical approach for utilizing CRISPR/Cas9 in precise genome editing, including identifying the target gene sequence, designing gRNA and protein (Cas9), and delivering the CRISPR components to target cells.

HyCas9-12aGEP: an efficient genome editing platform for Corynebacterium glutamicum.

Corynebacterium glutamicum plays a crucial role as a significant industrial producer of metabolites. Despite the successful development of CRISPR-Cas9 and CRISPR-Cas12a-assisted genome editing technologies in C. glutamicum, their editing resolution and efficiency are hampered by the diverse on-target activities of guide RNAs (gRNAs). To address this problem, a hybrid CRISPR-Cas9-Cas12a genome editing platform (HyCas9-12aGEP) was developed in C. glutamicum in this study to co-express sgRNA (corresponding to SpCas9 guide RNA), crRNA (corresponding to FnCas12a guide RNA), or hfgRNA (formed by the fusion of sgRNA and crRNA). HyCas9-12aGEP improves the efficiency of mapping active gRNAs and outperforms both CRISPR-Cas9 and CRISPR-Cas12a in genome editing resolution and efficiency. In the experiment involving the deletion of the cg0697-0740 gene segment, an unexpected phenotype was observed, and HyCas9-12aGEP efficiently identified the responsible genotype from more than 40 genes. Here, HyCas9-12aGEP greatly improve our capability in terms of genome reprogramming in C. glutamicum.

Data Visualization of CRISPR-Cas9 Guide RNA Design Tools.

With the advancement of genomic engineering and genetic modification techniques, the uptake of computational tools to design guide RNA increased drastically. Searching for genomic targets to design guides with maximum on-target activity (efficiency) and minimum off-target activity (specificity) is now an essential part of genome editing experiments. Today, a variety of tools exist that allow the search of genomic targets and let users customize their search parameters to better suit their experiments. Here we present an overview of different ways to visualize these searched CRISPR target sites along with specific downstream information like primer design, restriction enzyme activity and mutational outcome prediction after a double-stranded break. We discuss the importance of a good visualization summary to interpret information along with different ways to represent similar information effectively.

Parallelized engineering of mutational models using piggyBac transposon delivery of CRISPR libraries.

New technologies and large-cohort studies have enabled novel variant discovery and association at unprecedented scale, yet functional characterization of these variants remains paramount to deciphering disease mechanisms. Approaches that facilitate parallelized genome editing of cells of interest or induced pluripotent stem cells (iPSCs) have become critical tools toward this goal. Here, we developed an approach that incorporates libraries of CRISPR-Cas9 guide RNAs (gRNAs) together with inducible Cas9 into a piggyBac (PB) transposon system to engineer dozens to hundreds of genomic variants in parallel against isogenic cellular backgrounds. This method empowers loss-of-function (LoF) studies through the introduction of insertions or deletions (indels) and copy-number variants (CNVs), though generating specific nucleotide changes is possible with prime editing. The ability to rapidly establish high-quality mutational models at scale will facilitate the development of isogenic cellular collections and catalyze comparative functional genomic studies investigating the roles of hundreds of genes and mutations in development and disease.

Coupling High-Throughput and Targeted Screening for Identification of Nonobvious Metabolic Engineering Targets.

Identification of metabolic engineering targets is a fundamental challenge in strain development programs. While high-throughput (HTP) genetic engineering methodologies capable of generating vast diversity are being developed at a rapid rate, a majority of industrially interesting molecules cannot be screened at sufficient throughput to leverage these techniques. We propose a workflow that couples HTP screening of common precursors (e.g., amino acids) that can be screened either directly or by artificial biosensors, with low-throughput targeted validation of the molecule of interest to uncover nonintuitive beneficial metabolic engineering targets and combinations hereof. Using this workflow, we identified several nonobvious novel targets for improving p-coumaric acid (p-CA) and l-DOPA production from two large 4k gRNA libraries each deregulating 1000 metabolic genes in the yeast Saccharomyces cerevisiae. We initially screened yeast cells transformed with gRNA library plasmids for individual regulatory targets improving the production of l-tyrosine-derived betaxanthins, identifying 30 targets that increased intracellular betaxanthin content 3.5-5.7 fold. Hereafter, we screened the targets individually in a high-producing p-CA strain, narrowing down the targets to six that increased the secreted titer by up to 15%. To investigate whether any of the six targets could be additively combined to improve p-CA production further, we created a gRNA multiplexing library and subjected it to our proposed coupled workflow. The combination of regulating PYC1 and NTH2 simultaneously resulted in the highest (threefold) improvement of the betaxanthin content, and an additive trend was also observed in the p-CA strain. Lastly, we tested the initial 30 targets in a l-DOPA producing strain, identifying 10 targets that increased the secreted titer by up to 89%, further validating our screening by proxy workflow. This coupled approach is useful for strain development in the absence of direct HTP screening assays for products of interest.

Recent Advances in CRISPR/Cas9-Mediated Genome Editing in Leishmania Strains.

BACKGROUND: Genome manipulation of Leishmania species and the creation of modified strains are widely employed strategies for various purposes, including gene function studies, the development of live attenuated vaccines, and the engineering of host cells for protein production. OBJECTIVE: Despite the introduction of novel manipulation approaches like CRISPR/Cas9 technology with significant advancements in recent years, the development of a reliable protocol for efficiently and precisely altering the genes of Leishmania strains remains a challenging endeavor. Following the successful adaptation of the CRISPR/Cas9 system for higher eukaryotic cells, several research groups have endeavored to apply this system to manipulate the genome of Leishmania. RESULTS: Despite the substantial differences between Leishmania and higher eukaryotes, the CRISPR/Cas9 system has been effectively tested and applied in Leishmania.  CONCLUSION: This comprehensive review summarizes all the CRISPR/Cas9 systems that have been employed in Leishmania, providing details on their methods and the expression systems for Cas9 and gRNA. The review also explores the various applications of the CRISPR system in Leishmania, including the deletion of multicopy gene families, the development of the Leishmania vaccine, complete gene deletions, investigations into chromosomal translocations, protein tagging, gene replacement, large-scale gene knockout, genome editing through cytosine base replacement, and its innovative use in the detection of Leishmania. In addition, the review offers an up-to-date overview of all double-strand break repair mechanisms in Leishmania.

gRNA Design: How Its Evolution Impacted on CRISPR/Cas9 Systems Refinement.

Over the past decade, genetic engineering has witnessed a revolution with the emergence of a relatively new genetic editing tool based on RNA-guided nucleases: the CRISPR/Cas9 system. Since the first report in 1987 and characterization in 2007 as a bacterial defense mechanism, this system has garnered immense interest and research attention. CRISPR systems provide immunity to bacteria against invading genetic material; however, with specific modifications in sequence and structure, it becomes a precise editing system capable of modifying the genomes of a wide range of organisms. The refinement of these modifications encompasses diverse approaches, including the development of more accurate nucleases, understanding of the cellular context and epigenetic conditions, and the re-designing guide RNAs (gRNAs). Considering the critical importance of the correct performance of CRISPR/Cas9 systems, our scope will emphasize the latter approach. Hence, we present an overview of the past and the most recent guide RNA web-based design tools, highlighting the evolution of their computational architecture and gRNA characteristics over the years. Our study explains computational approaches that use machine learning techniques, neural networks, and gRNA/target interactions data to enable predictions and classifications. This review could open the door to a dynamic community that uses up-to-date algorithms to optimize and create promising gRNAs, suitable for modern CRISPR/Cas9 engineering.

Engineering CRISPR guide RNAs for programmable RNA sensors.

As the most valuable feature of the CRISPR system, the programmability based on Watson-Crick base pairing has been widely exploited in engineering RNA sensors. The base pairing in these systems offers a connection between the RNA of interest and the CRISPR effector, providing a highly specific mechanism for RNA detection both in vivo and in vitro. In the last decade, despite the many successful RNA sensing approaches developed during the era of CRISPR explosion, a deeper understanding of the characteristics of CRISPR systems and the continuous expansion of the CRISPR family members indicates that the CRISPR-based RNA sensor remains a promising area from which a variety of new functions and applications can be engineered. Here, we present a systematic overview of the various strategies of engineering CRISPR gRNA for programmable RNA detection with an aim to clarify the role of gRNA's programmability among the present limitations and future development of CRISPR-enabled RNA sensors.