Highly selective ethanol vapour sensing materials for a new generation of gas sensors based on molecularly imprinted polymers.

A simple gas sensor consisting of a molecularly imprinted polymer-carbon nanotube composite cast onto a screen-printed electrode has been developed with extremely high selectivity for ethanol vapour over methanol vapour. Ethanol gas sensors typically display selectivity for ethanol over methanol in the range 2-4 times, while the mean ratio of ethanol to methanol response observed with the described device was 672. This selectivity was achieved under ambient conditions. Additionally, the molecularly imprinted polymer was produced using reagents previously applied in the development of a device selective for methanol, with only the template being changed. This demonstrates the versatility of molecular imprinting and provides a foundation for their greater integration into future gas sensors.

Development of a Screening Platform for Optimizing Chemical Nanosensor Materials.

Chemical sensors, relying on changes in the electrical conductance of a gas-sensitive material due to the surrounding gas, typically react with multiple target gases and the resulting response is not specific for a certain analyte species. The purpose of this study was the development of a multi-sensor platform for systematic screening of gas-sensitive nanomaterials. We have developed a specific Si-based platform chip, which integrates a total of 16 sensor structures. Along with a newly developed measurement setup, this multi-sensor platform enables simultaneous performance characterization of up to 16 different sensor materials in parallel in an automated gas measurement setup. In this study, we chose the well-established ultrathin SnO2 films as base material. In order to screen the sensor performance towards type and areal density of nanoparticles on the SnO2 films, the films are functionalized by ESJET printing Au-, NiPt-, and Pd-nanoparticle solutions with five different concentrations. The functionalized sensors have been tested toward the target gases: carbon monoxide and a specific hydrogen carbon gas mixture of acetylene, ethane, ethne, and propene. The measurements have been performed in three different humidity conditions (25%, 50% and 75% r.h.). We have found that all investigated types of NPs (except Pd) increase the responses of the sensors towards CO and HCmix and reach a maximum for an NP type specific concentration.

Laser-Induced Graphene for Advanced Sensing: Comprehensive Review of Applications.

Laser-induced graphene (LIG) and Laser-scribed graphene (LSG) are both advanced materials with significant potential in various applications, particularly in the field of sustainable sensors. The practical uses of LIG (LSG), which include gas detection, biological process monitoring, strain assessment, and environmental variable tracking, are thoroughly examined in this review paper. Its tunable characteristics distinguish LIG (LSG), which is developed from accurate laser beam modulation on polymeric substrates, and they are essential in advancing sensing technologies in many applications. The recent advances in LIG (LSG) applications include energy storage, biosensing, and electronics by steadily advancing efficiency and versatility. The remarkable flexibility of LIG (LSG) and its transformative potential in regard to sensor manufacturing and utilization are highlighted in this manuscript. Moreover, it thoroughly examines the various fabrication methods used in LIG (LSG) production, highlighting precision and adaptability. This review navigates the difficulties that are encountered in regard to implementing LIG sensors and looks ahead to future developments that will propel the industry forward. This paper provides a comprehensive summary of the latest research in LIG (LSG) and elucidates this innovative material's advanced and sustainable elements.

Ce Doping Effects on the Hydrogen Sensing Properties of Graphene/SnO2-Based Sensors.

The development of a sensor capable of selectively detecting hydrogen levels in the environment holds immense importance for ensuring the safer utilization of hydrogen energy. In this study, a hydrogen sensor made of Ce-doped single-layer graphene (SLG)/SnO2 composite material was fabricated using a hydrothermal method. The study examined the impact of varying Ce doping concentrations on the hydrogen sensing capabilities of the SLG/SnO2 matrix. The results show that the SLG/SnO2 hydrogen sensor doped with 2 mol% Ce demonstrated optimal performance at a humidity of 20%. It operated most efficiently at 250 °C, with a response of 2.49, representing a 25.75% improvement over the undoped sample. The response/recovery times were 0.46/3.92 s, which are 54.9% shorter than those of the undoped sample. The enhancement in hydrogen sensitivity stems from the synergistic effect of Ce and SLG, which facilitates the coexistence of n-n and p-n heterojunctions, thereby increasing carrier mobility and refining grain structure. Analysis via X-ray photoelectron spectroscopy (XPS) reveals that Ce increases the material's oxygen vacancy concentration, enhancing its hydrogen sensitivity. Ce-doped SLG/SnO2, with its robust hydrogen sensitivity, represents one of the leading candidates for future hydrogen gas sensors.

Recent Advances in Chemoresistive Gas Sensors Using Two-Dimensional Materials.

Two-dimensional (2D) materials have emerged as a promising candidate in the chemoresistive gas sensor field to overcome the disadvantages of conventional metal-oxide semiconductors owing to their strong surface activities and high surface-to-volume ratio. This review summarizes the various approaches to enhance the 2D-material-based gas sensors and provides an overview of their progress. The distinctive attributes of semiconductor gas sensors employing 2D materials will be highlighted with their inherent advantages and associated challenges. The general operating principles of semiconductor gas sensors and the unique characteristics of 2D materials in gas-sensing mechanisms will be explored. The pros and cons of 2D materials in gas-sensing channels are discussed, and a route to overcome the current challenges will be delivered. Finally, the recent advancements to enhance the performance of 2D-material-based gas sensors including photo-activation, heteroatom doping, defect engineering, heterostructures, and nanostructures will be discussed. This review should offer a broad range of readers a new perspective toward the future development of 2D-material-based gas sensors.

A Review of Gas Sensors for CO2 Based on Copper Oxides and Their Derivatives.

Buildings worldwide are becoming more thermally insulated, and air circulation is being reduced to a minimum. As a result, measuring indoor air quality is important to prevent harmful concentrations of various gases that can lead to safety risks and health problems. To measure such gases, it is necessary to produce low-cost and low-power-consuming sensors. Researchers have been focusing on semiconducting metal oxide (SMOx) gas sensors that can be combined with intelligent technologies such as smart homes, smart phones or smart watches to enable gas sensing anywhere and at any time. As a type of SMOx, p-type gas sensors are promising candidates and have attracted more interest in recent years due to their excellent electrical properties and stability. This review paper gives a short overview of the main development of sensors based on copper oxides and their composites, highlighting their potential for detecting CO2 and the factors influencing their performance.

Layer-Dependent Gas Sensing Mechanism of 2D Titanium Carbide (Ti3C2Tx) MXene.

Monolayers of Ti3C2Tx MXene and bilayer structures formed by partially overlapping monolayer flakes exhibit opposite sensing responses to a large scope of molecular analytes. When exposed to reducing analytes, monolayer MXene flakes show increased electrical conductivity, i.e., an n-type behavior, while bilayer structures become less conductive, exhibiting a p-type behavior. On the contrary, both monolayers and bilayers show unidirectional sensing responses with increased resistivity when exposed to oxidizing analytes. The sensing responses of Ti3C2Tx monolayers and bilayers are dominated by entirely different mechanisms. The sensing behavior of MXene monolayers is dictated by the charge transfer from adsorbed molecules and the response direction is consistent with the donor/acceptor properties of the analyte and the intrinsic n-type character of Ti3C2Tx. In contrast, the bilayer MXene structures always show the same response regardless of the donor/acceptor character of the analyte, and the resistivity always increases because of the intercalation of molecules between the Ti3C2Tx layers. This study explains the sensing behavior of bulk MXene sensors based on multiflake assemblies, in which this intercalation mechanism results in universal increase in resistance that for many analytes is seemingly inconsistent with the n-type character of the material. By scaling MXene sensors down from multiflake to single-flake level, we disentangled the charge transfer and intercalation effects and unraveled their contributions. In particular, we show that the charge transfer has a much faster kinetics than the intercalation process. Finally, we demonstrate that the layer-dependent gas sensing properties of MXenes can be employed for the design of sensor devices with enhanced molecular recognition.

Single-Atom Catalysts in Conductive Metal-Organic Frameworks: Enabling Reversible Gas Sensing at Room Temperature.

Conductive metal-organic frameworks (cMOFs) offer high porosity and electrical conductivity simultaneously, making them ideal for application in chemiresistive sensors. Recently, incorporating foreign elements such as catalytic nanoparticles into cMOFs has become a typical strategy to enhance their sensing properties. However, this approach has led to critical challenges, such as pore blockage that impedes gas diffusion, as well as limited improvement in reversibility. Herein, single-atom catalyst (SAC)-functionalized cMOF is presented as a robust solution to the current limitations. Facile functionalization of SACs in a cMOF can be achieved through electrochemical deposition of metal precursors. As a proof of concept, a Pd SAC-functionalized cMOF is synthesized. The Pd SACs are stabilized at the interplanar sites of cMOF with Pd-N4 coordination while preserving the porosity of the MOF matrix. Notably, the microenvironment created by Pd SACs prevents irreversible structural distortion of cMOFs and facilitates a reversible charge transfer with NO2. Consequently, the cMOF exhibits a fully recoverable NO2 response, which was not previously attainable with the nanoparticle functionalization. Additionally, with the combination of preserved porosity for gas diffusion, it demonstrates the fastest level of response and recovery speed compared to other 2D-cMOFs of this class.

Sensing of volatile pollutants on reduced graphene oxide-polypyrrole composite: DFT investigation.

Air pollutants generated from volatile toxic chemicals pose significant public health concerns. Density functional theory (DFT) computations were used in this research to explore the efficiency and mechanism of harmful gas sensing over the reduced graphene oxide-polypyrrole (rGO-PPy) composite. Volatile molecule sensing was investigated for the NH3, H2CO, CH3OH, and C2H5OH gas molecules over three PPy orientations on the rGO substrate. Results showed that PPy orientation over rGO plays a crucial role in the sensing efficiency of the investigated gas molecules. The rGO-PPy composite, with PPy in a vertical orientation, demonstrated higher stability and enhanced sensing than other orientations. The results indicate that the strong hydrogen bonding of NH3 and CH3OH with both PPy and rGO significantly enhanced the sensing of these gas molecules on rGO by influencing the charge transfer with adsorption energy values of - 0.84 and - 0.92 eV, respectively. The lack of a direct hydrogen bonding with rGO and the weak hydrogen bonding with PPy caused a weak adsorption of H2CO and C2H5OH over rGO as indicated by the adsorption energy values of - 0.60 and - 0.78 eV, respectively. Selectivity analysis for the NH3 and C2H5OH gas molecules showed that NH3 can maintain hydrogen bonding with PPy in the presence of C2H5OH while C2H5OH cannot sustain this interaction. This study highlights the importance of the structural and electronic properties of the rGO-PPy composite in volatile pollutant sensing, providing insights for designing high-performance gas sensors.

Response Enhancement in High-Temperature H2S-Treated Metal Oxide Gas Sensors.

Metal oxide gas sensors (MOGS), crucial components in monitoring air quality and detecting hazardous gases, are well known for their poisoning effects when exposed to certain gas molecules, such as hydrogen sulfide. Surprisingly, our research reveals that high-temperature H2S treatment leads to an enhancement effect rather than response decay. This study investigates the time-decaying response enhancement, being attributed to the formation of metal sulfide and metal sulfate on the metal oxide's surface, enhancing the electronic sensitization. Such an enhancement effect is demonstrated for various gases, including CO, CH3CH2OH, CH4, HCHO, and NH3. Additionally, the impacts of H2S treatment on the response and recovery time are also observed. Surface compositional analysis are conducted with X-ray photoelectron spectroscopy. A proposed mechanism for the enhancement effect is elaborated, highlighting the role of electronic sensitization and the sulfide-sulfate component. This research offers valuable insights into the potential applications of metal oxide sensors in sulfide-presented harsh environments in gas sensing, encouraging future exploration of optimized sensor materials, operation temperature, and the development of hydrogen sulfide poisoning-resistant and higher sensitivity MOGS.

Defect-Engineered WO3-x Architectures Coupled with Random Forest Algorithm Enables Real-Time Seafood Quality Assessment.

Reliable and real-time monitoring of seafood decay is attracting growing interest for food safety and human health, while it is still a great challenge to accurately identify the released triethylamine (TEA) from the complex volatilome. Herein, defect-engineered WO3-x architectures are presented to design advanced TEA sensors for seafood quality assessment. Benefiting from abundant oxygen vacancies, the obtained WO2.91 sensor exhibits remarkable TEA-sensing performance in terms of higher response (1.9 times), faster response time (2.1 times), lower detection limit (3.2 times), and higher TEA/NH3 selectivity (2.8 times) compared with the air-annealed WO2.96 sensor. Furthermore, the definite WO2.91 sensor demonstrates long-term stability and anti-interference in complex gases, enabling the accurate recognition of TEA during halibut decay (0-48 h). Coupled with the random forest algorithm with 70 estimators, the WO2.91 sensor enables accurate prediction of halibut storage with an accuracy of 95%. This work not only provides deep insights into improving gas-sensing performance by defect engineering but also offers a rational solution for reliably assessing seafood quality.

Electronic Noses: From Gas-Sensitive Components and Practical Applications to Data Processing.

Artificial olfaction, also known as an electronic nose, is a gas identification device that replicates the human olfactory organ. This system integrates sensor arrays to detect gases, data acquisition for signal processing, and data analysis for precise identification, enabling it to assess gases both qualitatively and quantitatively in complex settings. This article provides a brief overview of the research progress in electronic nose technology, which is divided into three main elements, focusing on gas-sensitive materials, electronic nose applications, and data analysis methods. Furthermore, the review explores both traditional MOS materials and the newer porous materials like MOFs for gas sensors, summarizing the applications of electronic noses across diverse fields including disease diagnosis, environmental monitoring, food safety, and agricultural production. Additionally, it covers electronic nose pattern recognition and signal drift suppression algorithms. Ultimately, the summary identifies challenges faced by current systems and offers innovative solutions for future advancements. Overall, this endeavor forges a solid foundation and establishes a conceptual framework for ongoing research in the field.

Wearable Inorganic Oxide Chemiresistor Based on Flexible Al2O3-Stabilized ZrO2 Ceramic Sponge Substrate for NO2 Sensing.

Wearable gas sensors, possessing the advantages of high sensitivity, excellent flexibility, high permeability, low weight, and workability at ambient conditions, hold great promise for real-time health monitoring and early warnings of poisonous gases. However, obtaining high-performance wearable gas sensors utilizing the current well-developed inorganic semiconductor oxide sensing materials is still very limited due to their fragile and rigid nature. Herein, a newly designed wearable gas sensor based on an all-inorganic ASZ (Al2O3-stabilized ZrO2)/ZnO/SnO2 nanofibers is introduced for the first time. The flexible ASZ ceramic sponge substrate (with a Young's modulus of 4.15 MPa) and ultrathin ZnO/SnO2 sensing layer endow the wearable gas sensor with promising properties such as super flexibility (with a bending radius of 5 mm), high gas permeability, and low weight. Furthermore, driven by UV light irradiation, this all-inorganic wearable sensor also demonstrates a stable NO2 sensing response under different bending states at room temperature, which enables the gas sensor to be more compatible with wearable sensing applications. This work offers a general method to achieve a high-performance wearable gas sensor based on inorganic materials and provides new insights into their potential in wearable gas-sensing applications.

Preparation of Pt and bamboo charcoal co-modified TiO2 for formaldehyde sensing at room temperature.

Anatase TiO2 has evolved into one of the most attractive materials for gas sensing owing to its strong oxidation activity and excellent sensing properties. In this study, we prepared Pt and bamboo charcoal co-modified nano-TiO2 using a one-pot hydrothermal process and applied it to detect formaldehyde. The successful incorporation of the precious metal Pt and bamboo charcoal onto TiO2 was confirmed by scanning electron microscope, transmission electron microscopy, energy dispersive spectrometer, X-ray diffraction and X-ray photoelectron spectroscopy. Detailed analysis revealed a homogeneous distribution of Pt nanoparticles and bamboo charcoal on the TiO2 surface, which significantly improved the surface area and facilitated gas adsorption. These modifiers significantly enhanced the response of TiO2 to formaldehyde, for instance, the response signal increased fourfold, while the response time decreased from 91 to 68 s. The sample with 0.5@Pt and 0.5@C bamboo charcoal performed the best, showcasing the synergistic effect of metal nanoparticles and carbonaceous materials on gas-sensing properties. Our work highlighted the potential of using biomass-derived carbon to enhance the detection of formaldehyde and demonstrated the importance of material characteristics in designing effective gas sensors.

A Prototype of Graphene E-Nose for Exhaled Breath Detection and Label-Free Diagnosis of Helicobacter Pylori Infection.

Helicobacter pylori (HP), a common microanaerobic bacteria that lives in the human mouth and stomach, is reported to infect ≈50% of the global population. The current diagnostic methods for HP are either invasive, time-consuming, or harmful. Therefore, a noninvasive and label-free HP diagnostic method needs to be developed urgently. Herein, reduced graphene oxide (rGO) is composited with different metal-based materials to construct a graphene-based electronic nose (e-nose), which exhibits excellent sensitivity and cross-reactive response to several gases in exhaled breath (EB). Principal component analysis (PCA) shows that four typical types of gases in EB can be well discriminated. Additionally, the potential of the e-nose in label-free detection of HP infection is demonstrated through the measurement and analysis of EB samples. Furthermore, a prototype of an e-nose device is designed and constructed for automatic EB detection and HP diagnosis. The accuracy of the prototype machine integrated with the graphene-based e-nose can reach 92% and 91% in the training and validation sets, respectively. These results demonstrate that the highly sensitive graphene-based e-nose has great potential for the label-free diagnosis of HP and may become a novel tool for non-invasive disease screening and diagnosis.

Ambipolar Heterojunction Sensors: Another Way to Detect Polluting Gases.

Gas sensors based on ambipolar materials offer significant advantages in reducing the size of the analytical system and enhancing its efficiency. Here, bilayer heterojunction devices are constructed using different octafluorinated phthalocyanine complexes, with Zn and Co as metal centers, combined with a lutetium bisphthalocyanine complex (LuPc2). Stable p-type behavior is observed for the ZnF8Pc/LuPc2 device under both electron-donating (NH3) and -oxidizing (NO2 and O3) gaseous species, while the CoF8Pc/LuPc2 device exhibits n-type behavior under reducing gases and p-type behavior under oxidizing gases. The nature of majority of the charge carriers of Co-based devices varies depending on the nature of target gases, displaying an ambipolar behavior. Both heterojunction devices demonstrate stable and observable response toward all three toxic gases in the sub-ppm range. Remarkably, the Co-based device is highly sensitive toward ammonia with a limit of detection (LOD) of 200 ppb, whereas the Zn-based device demonstrates exceptional sensitivity toward oxidizing gases, with excellent LOD values of 4.9 and 0.75 ppb toward NO2 and O3, respectively, which makes it one of the most effective organic heterojunction sensors reported so far for oxidizing gases.

Effects of UAS Rotor Wash on Air Quality Measurements.

Laboratory and field tests examined the potential for unmanned aircraft system (UAS) rotor wash effects on gas and particle measurements from a biomass combustion source. Tests compared simultaneous placement of two sets of CO and CO2 gas sensors and PM2.5 instruments on a UAS body and on a vertical or horizontal extension arm beyond the rotors. For 1 Hz temporal concentration comparisons, correlations of body versus arm placement for the PM2.5 particle sensors yielded R2 = 0.85 and for both gas sensor pairs exceeded R2 of 0.90. Increasing the timestep to 10 s average concentrations throughout the burns improved the R2 value for the PM2.5 to 0.95 from 0.85. Finally, comparison of whole-test average concentrations further increased the correlations between body- and arm-mounted sensors, exceeding R2 of 0.98 for both gases and particle measurements. Evaluation of PM2.5 emission factors with single factor ANOVA analyses showed no significant differences between the values derived from the arm, either vertical or horizontal, and those from the body. These results suggest that rotor wash effects on body- and arm-mounted sensors are minimal in scenarios where short duration, time-averaged concentrations are used to calculate emission factors and whole-area flux values.

Research Progress on Ammonia Sensors Based on Ti3C2Tx MXene at Room Temperature: A Review.

Ammonia (NH3) potentially harms human health, the ecosystem, industrial and agricultural production, and other fields. Therefore, the detection of NH3 has broad prospects and important significance. Ti3C2Tx is a common MXene material that is great for detecting NH3 at room temperature because it has a two-dimensional layered structure, a large specific surface area, is easy to functionalize on the surface, is sensitive to gases at room temperature, and is very selective for NH3. This review provides a detailed description of the preparation process as well as recent advances in the development of gas-sensing materials based on Ti3C2Tx MXene for room-temperature NH3 detection. It also analyzes the advantages and disadvantages of various preparation and synthesis methods for Ti3C2Tx MXene's performance. Since the gas-sensitive performance of pure Ti3C2Tx MXene regarding NH3 can be further improved, this review discusses additional composite materials, including metal oxides, conductive polymers, and two-dimensional materials that can be used to improve the sensitivity of pure Ti3C2Tx MXene to NH3. Furthermore, the present state of research on the NH3 sensitivity mechanism of Ti3C2Tx MXene-based sensors is summarized in this study. Finally, this paper analyzes the challenges and future prospects of Ti3C2Tx MXene-based gas-sensitive materials for room-temperature NH3 detection.

Finite Element Simulation Model of Metallic Thermal Conductivity Detectors for Compact Air Pollution Monitoring Devices.

Air pollution has been associated with several health problems. Detecting and measuring the concentration of harmful pollutants present in complex air mixtures has been a long-standing challenge, due to the intrinsic difficulty of distinguishing among these substances from interferent species and environmental conditions, both indoor and outdoor. Despite all efforts devoted by the scientific and industrial communities to tackling this challenge, the availability of suitable device technologies able to selectively discriminate these pollutants present in the air at minute, yet dangerous, concentrations and provide a quantitative measure of their concentrations is still an unmet need. Thermal conductivity detectors (TCDs) show promising characteristics that make them ideal gas sensing tools capable of recognising different gas analytes based on their physical fingerprint characteristics at the molecular level, such as their density, thermal conductivity, dynamic viscosity, and others. In this paper, the operation of TCD gas sensors is presented and explored using a finite element simulation of Joule heating in a sensing electrode placed in a gas volume. The results obtained show that the temperature, and hence, the resistance of the individual suspended microbridge sensor device, depends on the surrounding gas and its thermal conductivity, while the sensitivity and power consumption depend on the properties of the constitutive metal. Moreover, the electrode resistance is proven to be linearly dependent on the applied voltage.

Balancing Pd-H Interactions: Thiolate-Protected Palladium Nanoclusters for Robust and Rapid Hydrogen Gas Sensing.

The transition toward hydrogen gas (H2) as an eco-friendly and renewable energy source necessitates advanced safety technologies, particularly robust sensors for H2 leak detection and concentration monitoring. Although palladium (Pd)-based materials are preferred for their strong H2 affinity, intense palladium-hydrogen (Pd-H) interactions lead to phase transitions to palladium hydride (PdHx), compromising sensors' durability and detection speeds after multiple uses. In response, this study introduces a high-performance H2 sensor designed from thiolate-protected Pd nanoclusters (Pd8SR16), which leverages the synergistic effect between the metal and protective ligands to form an intermediate palladium-hydrogen-sulfur (Pd-H-S) state during H2 adsorption. Striking a balance, it preserves Pd-H binding affinity while preventing excessive interaction, thus lowering the energy required for H2 desorption. The dynamic adsorption-dissociation-recombination-desorption process is efficiently and highly reversible with Pd8SR16, ensuring robust and rapid H2 sensing at parts per million (ppm). The Pd8SR16-based sensor demonstrates exceptional stability (50 cycles; 0.11% standard deviation in response), prompt response/recovery (t90 = 0.95 s/6 s), low limit of detection (LoD, 1 ppm), and ambient temperature operability, ranking it among the most sensitive Pd-based H2 sensors. Furthermore, a multifunctional prototype demonstrates the practicality of real-world gas sensing using ligand-protected metal nanoclusters.