Ultradense Array of On-Chip Sensors for High-Throughput Electrochemical Analyses.

High-throughput sensors are valuable tools for enabling massive, fast, and accurate diagnostics. To yield this type of electrochemical device in a simple and low-cost way, high-density arrays of vertical gold thin-film microelectrode-based sensors are demonstrated, leading to the rapid and serial interrogation of dozens of samples (10 µL droplets). Based on 16 working ultramicroelectrodes (UMEs) and 3 quasi-reference electrodes (QREs), a total of 48 sensors were engineered in a 3D crossbar arrangement that devised a low number of conductive lines. By exploiting this design, a compact chip (75 × 35 mm) can enable performing 16 sequential analyses without intersensor interferences by dropping one sample per UME finger. In practice, the electrical connection to the sensors was achieved by simply switching the contact among WE adjacent fingers. Importantly, a short analysis time was ensured by interrogating the UMEs with chronoamperometry or square wave voltammetry using a low-cost and hand-held one-channel potentiostat. As a proof of concept, the detection of Staphylococcus aureus in 15 samples was performed within 14 min (20 min incubation and 225 s reading). Additionally, the implementation of peptide-tethered immunosensors in these chips allowed the screening of COVID-19 from patient serum samples with 100% accuracy. Our experiments also revealed that dispensing additional droplets on the array (in certain patterns) results in the overestimation of the faradaic current signals, a phenomenon referred to as crosstalk. To address this interference, a set of analyses was conducted to design a corrective strategy that boosted the testing capacity by allowing using all on-chip sensors to address subsequent analyses (i.e., 48 samples simultaneously dispensed on the chip). This strategy only required grounding the unused rows of QRE and can be broadly adopted to develop high-throughput UME-based sensors. In practice, we could analyze 48 droplets (with [Fe(CN)6]4-) within ∼8 min using amperometry.

A high-density genome-wide approach reveals novel genetic markers linked to small ruminant lentivirus susceptibility in sheep.

Visna/Maedi virus (VMV) is lentiviral disease of sheep responsible for severe production losses. Multiple genomic regions associated with infection were reported indicating genetic complexity. In this study, a combined genome-wide approach using a high-density SNP array has been performed, comparing VMV-infected (n = 78) and non-infected (n = 66) individuals of the Valle del Belice breed. The serological tests showed a seroprevalence of 26%. The comparison among results from different approaches (GWAS, Fisher's exact test and the FST analysis) revealed two association signals: on OAR03 close to the GRIN2B gene and on OAR05 close to the TMEM232 gene. To the best of our knowledge, there has been no previous association between these genes and lentiviral infection in any species. The GRIN2B gene plays a role in pain response, synaptic transmission, and receptor clustering, while TMEM232 is involved in the development of immune-related disorders. The results highlighted new aspects of the genetic complexity related to the resistance/susceptibility to VMV in sheep, confirming that studies on different breeds can lead to different results. The ideal approach for validation of the markers identified in our study is to use samples from a population independent from the discovery population with the same phenotype used in the discovery stage.

A Normalization Protocol Reduces Edge Effect in High-Throughput Analyses of Hydroxyurea Hypersensitivity in Fission Yeast.

Edge effect denotes better growth of microbial organisms situated at the edge of the solid agar media. Although the precise reason underlying edge effect is unresolved, it is generally attributed to greater nutrient availability with less competing neighbors at the edge. Nonetheless, edge effect constitutes an unavoidable confounding factor that results in misinterpretation of cell fitness, especially in high-throughput screening experiments widely employed for genome-wide investigation using microbial gene knockout or mutant libraries. Here, we visualize edge effect in high-throughput high-density pinning arrays and report a normalization approach based on colony growth rate to quantify drug (hydroxyurea)-hypersensitivity in fission yeast strains. This normalization procedure improved the accuracy of fitness measurement by compensating cell growth rate discrepancy at different locations on the plate and reducing false-positive and -negative frequencies. Our work thus provides a simple and coding-free solution for a struggling problem in robotics-based high-throughput screening experiments.

Diagnostic yield of high-density versus low-density EEG: The effect of spatial sampling, timing and duration of recording.

OBJECTIVE: To investigate the effect of spatial sampling and of recording duration on the diagnostic yield of EEG for identification of interictal epileptiform discharges (IEDs). Previous studies demonstrated that high-density (HD) recordings increased accuracy of localization compared to low-density (LD) recordings. METHODS: We have prospectively evaluated the effect of spatial sampling and of recording duration in patients who had short-term (ST) recordings with a HD array of 256 electrodes following long-term (LT) recordings with a LD array consisting of the standard IFCN array of 25 electrodes. IED clusters were identified in four datasets: LT-LD, ST-LD (spatially down-sampled to the standard IFCN array), ST-HD and a shortened (90 minutes) epoch of LT-LD. RESULTS: Sixty consecutive patients were recruited. We identified 89 IED clusters totally. Two clusters were found by increasing spatial sampling from 25 to 256 electrodes. This modest increase was not statistically significant. Eight clusters were missed by reducing the recording duration to 90 minutes, as compared with the LT recordings (p = 0.003). CONCLUSIONS: Recording duration is more important for the diagnostic yield of EEGs than increasing spatial sampling beyond the standard IFCN electrode array. SIGNIFICANCE: The standard IFCN electrode array provides sufficient spatial sampling for identification of the IEDs.

High-Density Redox Amplified Coulostatic Discharge-Based Biosensor Array.

High-density biosensor arrays are essential for many cutting-edge biomedical applications including point-of-care vaccination screening to detect multiple highly-contagious diseases. Typical electrochemical biosensing techniques are based on the measurement of sub-pA currents for micron-sized sensors requiring highly-sensitive readout circuits. Such circuits are often too complex to scale down for high-density arrays. In this paper, a high-density 4,096-pixel electrochemical biosensor array in 180 nm CMOS is presented. It uses a coulostatic discharge sensing technique and interdigitated electrode geometry to reduce both the complexity and size of the readout circuitry. Each biopixel contains an interdigitated microelectrode with a 13 aA low-leakage readout circuit directly underneath. Compared to standard planar electrodes, the implemented interdigitated electrodes achieve a maximum amplification factor of 10.5× from redox cycling. The array's sensor density is comparable to state-of-the-art arrays, all without augmenting the sensors with complex post-processing. The detection of anti-Rubella and anti-Mumps antibodies in human serum is demonstrated.