Rapid determination of volatile benzene derivatives and chlorobenzenes in goat's milk by HS-SPME-GC-MS/MS.

A method for the determination of eight benzenes (BTEXs) and twelve chlorobenzenes (CBs) in goat's milk by headspace solid-phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS/MS) was developed. The study investigated the impact of various factors such as extraction fiber type, salt amount, equilibrium conditions, and desorption conditions on the outcomes. Target analytes were separated on a DB-HeavyWAX column and quantified using the external standard method. The results showed that the target compounds had a good linear relationship in the range of 0.01 ∼ 50 µg/L (R2 > 0.997), the limit of detection (LOD) was 0.003 ∼ 0.150 µg/L, and the limit of quantification (LOQ) was 0.01 ∼ 0.50 µg/L. The average recoveries were 82%-116% and the relative standard deviation (RSD) was 0.8%-17.3% under the three addition levels of 1×, 2×, and 10 × LOQ. In a survey of twenty goat's milk samples, only ethylbenzene, xylenes, cumene, chlorobenzene, and 1,4-dichlorobenzene were detected at levels exceeding their respective limits of quantification. The method was evaluated using two ecological scales (Eco-Scale), GAPI and AGREEN, to verify its environmental friendliness and applicability. This method is simple, green, and efficient, which provides a certain theoretical basis for the production and quality safety evaluation of dairy products.

Development of a Novel SPME Coating for Efficient Extraction of Organochlorine Pesticides in Liquid Dairy Products.

A sensitive and accurate analysis of organochlorine pesticide (OCP) residues in dairy products poses a significant challenge. Herein, a novel covalent organic polymer, Azo-COP-1, was synthesized for the enhanced extraction of OCPs in dairy products. The solid phase microextraction fiber coated with Azo-COP-1 demonstrated excellent extraction performance for the OCPs via hydrogen bonding, halogen bonding, π-π stacking, and electrostatic interactions. Coupled with gas chromatography-electron capture detection, we developed a facile and reliable method for detecting OCPs in six types of dairy products with low limits of detection (2.0-400 pg g-1) and high method recoveries (82.6-113%). Azo-COP-1 coatings exhibited good stability and durability. The results verified the feasibility of using Azo-COP-1-based SPME to extract OCP residues in dairy product samples, highlighting its potential for routine monitoring of pesticide residues and food safety assessments.

Hierarchically spherical assembly of carbon nanorods derived from metal-organic framework as solid-phase microextraction coating for nitrated polycyclic aromatic hydrocarbon analysis.

Nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) are pervasive contaminants in aquatic environments. They are characterized by persistence, toxicity, bioaccumulation, and long-range transport, significantly threatening human health. The development of sensitive methods for nitro-PAH analysis in environmental samples is in great need. This study developed a novel carbonaceous SPME coating derived from metal-organic framework (MOF), namely a spherical assembly consisting of carbon nanorods with hierarchical porosity (HP-MOF-C), for the extraction and determination of nitro-PAHs in waters. The HP-MOF-C coated fiber demonstrated superior nitro-PAH extraction efficiencies, with enrichment factors 2∼70 times higher than commercial fibers. This enhancement was due to the strong hydrophobic, π-π electron coupling/stacking, and π-π electron donor-acceptor interactions between the carbonaceous framework of HP-MOF-C and the nitro-PAHs. Moreover, the unique hierarchical porous structure of HP-MOF-C accelerated the diffusion of nitro-PAHs, further facilitating their enrichment. The fiber also exhibited good thermal stability, remarkable chemical stabilities against common acid, base, and polar/non-polar solvents, and long service life (> 150 SPME cycles). The nitro-PAH determination method based on HP-MOF-C coating yielded wide linear ranges, low detection limits (0.4∼5.0 ng L-1), satisfactory repeatability and reproducibility, and good recoveries in real water samples. The proposed method was considered to be green according to the Analytical GREEnness assessment. The present study not only offers an efficient SPME coating for the enrichment of nitro-PAHs, but also provides insights into the design of porous coating materials.

Rapid ion pair-based surfactant-assisted liquid-liquid microextraction with solidification of floating organic drop for simultaneous spectrophotometric determination of selected anionic dyes in food samples.

Ion pair-based surfactant-assisted liquid-liquid microextraction with solidification of floating organic drops has been developed to extract Allura red (AR), tartrazine (TAR), and fast green (FG) prior to spectrophotometric determination. Cetyltrimethylammonium bromide (CTAB) was employed as ion-pairing agent to enhance the hydrophobic behavior of anionic dyes. 1-undecanol and ethanol were used as the extraction and dispersion solvents, respectively. The dyes were quantitatively extracted in the presence of KCl (0.15 mol L-1) at pH 4.0. The method exhibits wide linearity (15.0-1500.0 µg L-1 for AR, 35.0-2000.0 µg L-1 for TAR, and 3.0-1200.0 µg L-1 for FG) with preconcentration factors of 19.6, 20.1, and 19.9, respectively. The detection limit was 3.7. 9.5, and 0.83 µg L-1 for AR, TAR, and FG, respectively. The relative standard deviation did not exceed 2.1 %. The procedure was applied for the determination of these dyes in food samples.

Promoting capillary microextraction of six organic nitrogen pesticides in water samples using versatile ZIF-8 hybrid monolithic column.

Because of rapid industrialization and agriculturalization, solving the pressing problems of environment pollution, especially water and food quality, requires innovative solutions. In this paper, a novel and versatile metal-organic framework (ZIF-8)-hybrid monolithic column (ZIF-HMC) was prepared for in-tube solid-phase microextraction (IT-SPME) of organic nitrogen pesticides (ONPs). The prepared monolithic columns had superior adsorption sites, high porosity, excellent permeability, and ideal specific surface area based on Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD), Thermal Field Emission Scanning Electron Microscopy (SEM), Energy Dispersive Spectrometry (EDS), X-ray Photoelectron Spectroscopy (XPS), and N2 adsorption-desorption. The ZIF-HMC contained a large number of nitrogen and oxygen atoms, benzene rings and ZIF-8, which could synergistically promote the adsorption efficiency of ONPs through multiple interactions, such as hydrogen bonding, π-π accumulation, hydrophobic interactions, cation-π interactions, and pore adsorption by MOFs. Under the optimal conditions, a simple, efficient, and sensitive method for the analysis of six organic pesticides in environmental water samples was developed by using the ZIF-HMC as the extraction medium coupled with high performance liquid chromatography-ultraviolet (HPLC-UV). The method had a wide linear range (0.63-1000 µg L-1), a low detection limit (0.19-1.91 µg L-1) and satisfactory recoveries (87.4 %-110.2 %), the linear correlation coefficient was (R2) 0.9972-0.9995 and the relative standard deviation (RSD) was less than 2.64 %. The study had demonstrated the potential application of the developed method for the enrichment and analysis of organic pesticides in complex matrices of environmental samples, as well as the feasibility of MOFs materials for IT-SPME sample preparation.

Optimization of the determination of volatile organic compounds in plant tissue and soil samples: Untargeted metabolomics of main active compounds.

This review critically assesses the determination of low molecular weight volatiles by different methods, providing context for the development of suitable techniques to determine volatile content in plant tissue and soil samples as well as the associated analytical challenges. Although sensitive analytical methods have been reported in recent decades, studies on their application in modern investigative techniques are lacking. Herein, the latest sampling methods in volatile biochemistry, current advancements in the understanding of these analytes, and the significance of these findings for other types of volatiles are summarized. Gas chromatography, high-performance liquid chromatography, ion chromatography, thin-film microextraction, and real-time monitoring techniques are discussed and critically determined. This review concerns the methods most suitable for future research in this area.

Bar adsorptive microextraction and liquid chromatography-diode array detection of synthetic cannabinoids in oral fluid.

In recent years, synthetic cannabinoids (SCs) have become a major public health issue. For this reason, there is a need for innovative analytical methods that allow its monitoring in biological matrices. In this work, we propose a novel methodology to screen eight SCs (AM-694, cumyl-5F-PINACA, MAM-2201, 5F-UR-144, JWH-018, JWH-122, UR-144 and APINACA) in oral fluids. A bar adsorptive microextraction method followed by microliquid desorption combined with high-performance liquid chromatography with diode array detection (BAµE-µLD/HPLC-DAD) was developed to monitor the target SCs. The main factors affecting the BAµE technology were fully optimized for oral fluid analysis. Under optimized experimental conditions, the proposed methodology showed good linear dynamic ranges from 20.0 to 2000.0 µg L-1 (r2 > 0.99, relative residuals < 15%), limits of detection between 2.0 and 5.0 µg L-1 and suitable average recovery yields (87.9-100.5%) for the eight studied SCs. The intra- and interday accuracies (bias ≤ ± 14.7%) and precisions (RSD ≤ 14.9%) were also evaluated at three spiking levels. The validated methodology was then assayed to oral fluid samples collected from several volunteers. The proposed analytical approach showed remarkable performance and could be an effective alternative for routine monitoring of the target compounds in oral fluid.

Evaluation of the potential use of protoporphyrins as biomarkers of anemic disease in human urine from inflammatory bowel disease patients.

Protoporphyrins are organic compounds with cyclic structure that are synthesised by a wide variety of organisms. In humans, these compounds are detected in blood and urine, with significantly higher levels in blood. Their potential as biomarkers of anemia and other diseases is currently being investigated, as their levels change according to the biochemical processes associated with the disease. The most widely used biomarker of anemia is serum ferritin, but it is unreliable in patients with inflammatory bowel disease (IBD) because its levels can be altered by acute inflammation and/or infections. There is therefore a need to look for new markers to help diagnose anemia in IBD patients. This work develops and validates a method for the determination of three protoporphyrins in human urine: protoporphyrin IX (PPIX), protoporphyrin IX complex with Zn (ZnPPIX) and protoporphyrin IX complex with Fe (II) (FePPIX), the latter also known as heme. The aim is to evaluate their potential as biomarkers of anemic disease in patients diagnosed with IBD. The proposed analytical method is based on high performance liquid chromatography (HPLC) with dual detection based on photodiode array (PDA) and fluorescence (FD). Quantification of the analytes at very low concentrations is possible due to the efficient preconcentration provided by dispersive liquid-liquid microextraction (DLLME) and the sensitivity of the detection systems. The method was validated by evaluating linearity (25-1000 ng mL-1), matrix effect, sensitivity (limits of quantification were between 5 and 11 ng mL-1), selectivity, accuracy, carry-over, dilution integrity, stability and precision (< 12.1 %). Finally, statistical analyses applied to the sample quantification results showed these three markers, together with five clinical markers, were significantly different between anemic and non-anemic IBD patients.

Development of a hydrophilic-lipophilic-balanced copolymer@zirconium-based metal-organic framework-based solid-phase microextraction probe for the trace determination of organophosphorus pesticides in tea infusions.

Organophosphorus pesticides (OPPs) present in tea infusions pose a serious threat to human health. In this study, a sensitive method for the determination of OPPs was developed based on a direct-immersion solid-phase microextraction (DI-SPME) probe. By fine adjustment of the ratio and one-step polymerization of dihydroxy-functionalized zirconium-based metal-organic framework UiO-66-(OH)2 and divinylbenzene-N-vinyl pyrrolidone (DVB-NVP) microspheres, the DVB-NVP@ UiO-66-(OH)2 (D-N@U) composite with an optimal hydrophilic-lipophilic balance (HLB) was achieved. Furthermore, D-N@U was adhesively bonded to stainless-steel wires to fabricate a DI-SPME probe. OPPs, especially those with nonpolar properties characterized by a high octanol-water partition coefficient (log KOW), were selectively and efficiently enriched on the D-N@U-coated DI-SPME probe from tea infusions. Coupled with a gas chromatography-flame photometric detector, the as-fabricated D-N@U-coated DI-SPME probe achieved good performance for OPPs analysis with a wide linear dynamic range of 0.10-500.00 µg/L and low detection limits of 1.96-6.69 ng/L. Moreover, in spiked samples, the recoveries and relative standard deviations were in the ranges of 73.12%-101.20 % and 1.03%-6.56 %, respectively. Owing to its simple operation, high extraction efficiency, and high sensitivity, this approach has great potential for the rapid determination of multiple pesticide trace-level residues in food.

Alcohol-based hydrophobic deep eutectic solvents and ultrasound-assisted liquid phase microextraction followed by GC-MS for the extraction and analysis of organophosphorus pesticides in the blood of farmers.

Organophosphorus pesticides (OPPs) are a group of pesticides that are most widely used in the agricultural sector, and farmers are exposed to these chemicals more than other members of society. In this work, an environmentally friendly, simple, and safe ultrasound-assisted dispersive liquid-liquid microextraction (USA-DLLME) method using alcohol-based hydrophobic deep eutectic solvents (HDESs) followed by gas chromatography-mass spectroscopy (GC-MS) was developed for the extraction and determination of OPPs in the blood of farmers studied in Ravansar cohort. DESs synthesized from thymol as hydrogen bond donor (HBD) and aliphatic alcohols as hydrogen bond acceptor (HBA) have been used as extractants. Under optimal experimental conditions, the reproducibility of the method based on 7 replicate measurements of 10 µg L-1 of OPPs in blood samples was in the range of 1.4-3.8%. The method showed a linearity in the range of 0.01-150 µg L-1. The limits of detection and limits of quantification were between 0.003 and 0.02 µg L-1 and 0.01-0.05 µg L-1, respectively. The matrix effect and accuracy of the method were confirmed by spiking different amounts of OPPs in real blood samples and obtaining relative recoveries in the range of 91-112%. The results showed that the concentration of OPPs in the case group was significantly higher than in the control group, which is because the case group was exposed to OPPs during the spraying of agricultural products.

Detection and health implications of phthalates in tea beverages in market: Application of novel solid-phase microextraction fibers.

Assessment and control of emerging organic pollutants in food have become critical for global food safety and health. The European Union has set standards for certain emerging organic pollutants, such as phthalic acid esters (PAEs) in food. Because of being endocrine disruptors, PAEs are toxic and carcinogenic to humans. Release of PAEs from packaging materials poses a potential risk to human health and causes environmental pollution. In this study, a highly sensitive analytical method for the detection of PAE contents in tea beverages was established using hydroxyl-functionalized covalent organic frameworks (COFs) as solid-phase microextraction (SPME) coating. Results indicate that functionalization with hydroxyl groups enhances the adsorption of PAEs. The proposed method exhibits a wide linear range (1-20,000 ng L-1), low limits of detection (> 0.048 ng L-1), and satisfactory recovery (72.8 %-127.3 %). To investigate the PAE contamination in beverages, contamination levels of six typical PAEs and their health impacts were surveyed across various brands/types/packaging materials of tea beverages sold in China. Results of the hazard quotient and hazard index approaches suggest no or extremely low health concerns regarding PAE levels. We observe that hydroxyl groups functionalized on COFs enhance the adsorption of PAEs. Moreover, an important outcome of this study is development of an efficient and sensitive direct detection method for PAEs in complex tea matrices, providing a reliable approach for the assessment of PAEs in other complex matrices.

[Analysis of phthalate esters from vegetable oils by gas chromatography-mass spectrometry coupled with headspace solid-phase microextraction using cyclodextrin-based hypercrosslinked polymer coated fiber].

Phthalate esters (PAEs) are used as additives to enhance the pliability and malleability of plastics. These substances frequently migrate from packaging materials to vegetable oils because of the absence of covalent bonds. Over time, this migration could result in the accumulation of PAEs in the human body through ingestion, contributing to various diseases. Therefore, accurate qualitative and quantitative analyses of PAEs in vegetable oils are imperative to assess the origins of contamination and investigate their toxicity, degradation, migration, and transformation patterns. However, the concentration of PAEs in most samples is low, and the composition of vegetable oils is complex. Thus, PAEs must be enriched and purified using appropriate sample pretreatment procedures before analysis. Common methods for pretreating PAEs in oil include solid-phase extraction (SPE), dispersive SPE, and magnetic SPE. These techniques require time-consuming and labor-intensive procedures such as oil dissolution, solvent extraction, and degreasing. These approaches also require numerous solvents and containers, increasing the risk of sample cross-contamination. Solid-phase microextraction (SPME) integrates sampling, extraction, purification, concentration, and injection into a single process, significantly accelerating analytical testing and reducing the potential for sample cross-contamination. In headspace (HS) mode, the analytes achieve equilibrium on the coating and are extracted in the gas phase. The fibers are shielded from nonvolatile and high-relative molecular mass substances in the sample matrix. Thus, SPME is an ideal method for extracting volatile compounds in vegetable oils. When HS-SPME coupled with gas chromatography-mass spectrometry (GC-MS), it can achieve the rapid screening of PAEs in vegetable oil. In this study, an SPME with cyclodextrin-based hypercrosslinked polymers (BnCD-HCP) coated on stainless steel fibers was employed to extract PAEs from vegetable oil. The structure and morphology of the polymers were characterized using Fourier-transform infrared spectroscopy, nuclear magnetic spectroscopy, and scanning electron microscopy. BnCD-HCP exhibited high stability and diverse interactions, including π-π, hydrophobic, and host-guest interactions. The oil samples were incubated with methanol, and the PAEs were extracted from the headspace using the probe. The optimal extraction parameters included an extraction time of 20 min, extraction temperature of 50 ℃, desorption time of 4 min, and desorption temperature of 275 ℃. The BnCD-HCP/HS-SPME method was evaluated under optimized experimental conditions. The limits of detection (LODs) and quantification (LOQs) were determined by applying signal-to-noise ratios (S/N) of 3 and 10, respectively. Method accuracy was evaluated using relative standard deviations (RSDs). Single-needle precision was evaluated by conducting three consecutive analyses at 3 h intervals within a day. Inter-needle precision was assessed by conducting the same analyses (three replicates) with differently coated fibers. The 12 PAE compounds exhibited good linearity with correlation coefficients (R2) of at least 0.99. The LODs and LOQs ranged from 0.21 to 3.74 µg/kg and from 0.69 to 12.34 µg/kg, respectively. The RSDs were in the range of 1.8%-11.4% and 5.1%-13.9% for the single-needle and needle-to-needle methods, respectively. The proposed method was applied to soybean, peanut, and sunflower oils, and two PAEs were found in all three oils. Moreover, the method demonstrated good precision (RSD=1.17%-11.73%) and recoveries (72.49%-124.43%). Compared with other methods, the developed method was able to extract many target analytes and had a low or comparable LOD and high recovery. More importantly, this method does not require tedious operations such as solvent extraction and purification. Consequently, the developed method can be used to extract not only PAEs in oils but also other substances with a high lipid content.

Effective recovery of limonene-rich concentrate from lemon residues using terpene-based deep eutectic solvents based on statistical experimental design.

INTRODUCTION: Waste by-products of the juice industry appear valuable for the circular economy concept, considering that the peel accounts for almost half of the total fruit weight. Therefore, the recovery of these highly valuable components from relevant biowaste has become a very interesting research topic. OBJECTIVE: The current study aims to develop an extraction process integrated with hydrophobic deep eutectic solvent (DES) based on statistical experimental design approach. MATERIAL AND METHODS: Homogenizer-assissted extraction (HAE) was used to recover the citrus extract rich in limonene (the main component of the volatile mixture) from lemon peels. Menthol-based deep eutectic mixtures were accompanied by carboxylic acids (formic, acetic, and propionic acids). Optimization continued on the combination that gave the highest efficiency (in terms of limonene content) among the solvents prepared at different molar ratios (1/1, 1/2, and 2/1). Process parameters were analyzed to optimize the process through central composite design with response surface method (RSM). D-Limonene yield was quantified with gas chromatography-mass spectrometry (GC-MS) with solid-phase microextraction (SPME) technique. The quality of the lemon peel extracts was also evaluated with respect to in vitro bioactivity assays (phenolic content and 2,2-diphenyl-1-picrylhydrazyl [DPPH] free radical scavenging activity). RESULTS: The maximum yield (3.80 mg-limonene per g fresh sample) was achieved by 2 mg solid/30 mL DES, ~53 sec, and ~8500 rpm. Statistically most effective variable was identified as solid mass, followed by second powers of mixing speed and extraction time at p < 0.0001.

Determination of amphetamines in hair samples using microextraction by packed sorbent and gas chromatography-mass spectrometry.

Several protocols for the analysis of amphetamine-type stimulants (ATS) in hair have been developed over the years, with microextraction by packed sorbent (MEPS) being used for drugs like opiates, cocaine and ketamine. However, concerning ATS determination in hair samples, this approach has only been applied so far to amphetamine (AMP) and methamphetamine (MAMP). This study aimed at developing and validating a MEPS-based procedure for the determination in hair of not only AMP and MAMP but also of 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxymethamphetamine (MDMA), 1-(1,3-benzodioxol-5-yl)propan-2-yl (ethyl)amine (MDE) and N-methyl-1-(1,3-benzodioxol-5-yl)-2-aminobutane (MBDB) as well. Hair, 50 mg, was incubated with 1 M sodium hydroxide (NaOH) at 45°C overnight, neutralization with 10 M hydrochloric acid (HCl) and centrifugation followed. The design of experiments approach was used for MEPS optimization, with the final optimized conditions including conditioning (250 µL methanol and deionized water), loading (18 × 100 µL) and elution (7 × 100 µL 2% NH4OH in acetonitrile). The eluted extract was evaporated to dryness and underwent microwave-assisted derivatization with N-methyl-bis(trifluoroacetamide) (MBTFA), and it was afterwards injected onto the gas chromatography-mass spectrometer (GC-MS). The obtained recoveries ranged between 8% and 14% for AMP, 14% and 20% for MAMP, 10% and 15% for MDA, 18% and 28% for MDMA, 25% and 43% for MDE and 34% and 52% for MBDB, and the method was linear from 0.2 to 5.0 ng/mg. Precision and accuracy were in accordance with international method validation guidelines. This novel method involving MEPS coupled to GC-MS offers a swift, eco-friendly and cost-effective alternative to traditional procedures for detecting these AMPs in hair samples.

[Rapid determination of nine preservatives in tobacco flavor by three phase-hollow fiber-liquid phase microextraction-high performance liquid chromatography].

Tobacco flavors are extensively utilized in traditional tobacco products, electronic nicotine, heated tobacco products, and snuff. To inhibit fungal growth arising from high moisture content, preservatives such as benzoic acid (BA), sorbic acid (SA), and parabens are often incorporated into tobacco flavors. Nonetheless, consuming preservatives beyond safety thresholds may pose health risks. Therefore, analytical determination of these preservatives is crucial for both quality assurance and consumer protection. For example, BA and SA can induce adverse reactions in susceptible individuals, including asthma, urticaria, metabolic acidosis, and convulsions. Parabens, because of their endocrine activity, are classified as endocrine-disrupting chemicals. Despite extensive research, the concurrent quantification of trace-level hydrophilic (BA and SA) and hydrophobic (methylparaben, ethylparaben, isopropylparaben, propylparaben, butylparaben, isobutylparaben, and benzylparaben) preservatives in tobacco flavors remains challenging. Traditional liquid phase extraction coupled with high performance liquid chromatography (HPLC) often results in high false positive rates and inadequate sensitivity. In contrast, tandem mass spectrometry offers high sensitivity and specificity; however, its widespread application is limited by laborious sample preparation and significant operational costs. Therefore, it is crucial to establish a fast and sensitive sample pretreatment and analysis method for the nine preservatives in tobacco flavors. In this study, a method for the simultaneous determination of the nine preservatives (SA, BA and seven parabens) in tobacco flavor was established based on three phase-hollow fiber-liquid phase microextraction (3P-HF-LPME) technology combined with HPLC. To obtain the optimal pretreatment conditions, extraction solvent type, sample phase pH, acceptor phase pH, sample phase volume, extraction time, and mass fraction of sodium chloride, were examined. Additionally, the HPLC parameters, including UV detection wavelength and mobile phase composition, were refined. The optimal extraction conditions were as follows: dihexyl ether was used as extraction solvent, 15 mL sample solution (pH 4) was used as sample phase, sodium hydroxide aqueous solution (pH 12) was used as acceptor phase, and the extraction was carried out at 800 r/min for 30 min. Chromatographic separation was accomplished using an Agilent Poroshell 120 EC-C18 column (100 mm×3 mm, 2.7 µm) and a mobile phase comprising methanol, 0.02 mol/L ammonium acetate aqueous solution (containing 0.5% acetic acid), and acetonitrile for gradient elution. Under the optimized conditions, the nine target analytes showed good linear relationships in their respective linear ranges, the correlation coefficients (r) were ≥0.9967, limits of detection (LODs) and quantification (LOQs) were 0.02-0.07 mg/kg and 0.08-0.24 mg/kg, respectively. Under two spiked levels, the enrichment factors (EFs) and extraction recoveries (ERs) of the nine target analytes were 30.6-91.1 and 6.1%-18.2%, respectively. The recoveries of the nine target analytes ranged from 82.2% to 115.7% and the relative standard deviations (RSDs) (n=5) were less than 14.5% at low, medium and high levels. The developed method is straightforward, precise, sensitive, and well-suited for the rapid screening of preservatives in tobacco flavor samples.

Methyltrimethoxysilane modified tin dioxide microspheres with hydrophobic networks and abundant adsorbed oxygen for efficient solid-phase microextraction of polychlorinated biphenyls.

Methyltrimethoxysilane (MTMS) modified tin dioxide microspheres (MTMS/SnO2) were prepared by a facile hydrothermal method and heated reflux reaction strategy. The characterization results indicate that the modification of MTMS induced the formation of a hydrophobic network within the composites, while maintaining abundant adsorbed oxygen species. Subsequently, the MTMS/SnO2 microspheres were used as a solid-phase microextraction (SPME) coating for the efficient extraction and sensitive determination of trace polychlorinated biphenyls (PCBs) in aqueous solutions coupled to gas chromatography-mass spectrometry. MTMS/SnO2 coating exhibited superior extraction performances for PCBs compared with commercial SPME and pure SnO2 microspheres coatings, owing to the hydrophobic crosslinking and adsorbed oxygen-enhanced hydrogen bonding. The proposed analytical method presented respectable linearity in the concentration range 0.25-1000 ng L-1, with low limits of detection varying from 0.036 to 0.14 ng L-1 for seven PCBs and excellent precision, with relative standard deviations of 5.7-9.8% for a single fiber and 8.2-13.1% for five fibers. Finally, the proposed method was successfully used for determination of PCBs in real water with recoveries ranging from 75.8 to 115.6%. This study proposed a new type SPME coating of MTMS/SnO2 microspheres, which extended the potential of SnO2 in capturing and determining organic pollutants.

Natural deep eutectic solvent for the simultaneous derivatization and microextraction of isoniazid from human plasma.

BACKGROUND: Personalized medicine is a rapidly revolving field that offers new opportunities for tailoring disease treatment to individual patients. The main idea behind this approach is to carefully select safe and effective medications and treatment plant based on each patient's unique pharmacokinetic profile. Isoniazid is a first-line anti-tuberculosis drug that has interindividual variability in its metabolic processing, leading to significant differences in plasma concentrations among patients receiving equivalent doses. This variability necessitates the creation of individualized treatment regimens as part of personalized medicine to achieve more effective therapy. RESULTS: In this work, a deep eutectic solvent-based liquid-liquid microextraction approach for the separation and determination of isoniazid in human plasma by high-performance liquid chromatography with UV-Vis detection was developed for the first time. A new natural deep eutectic solvent based on thymol as a hydrogen bond donor and 4-methoxybenzaldehyde as a hydrogen bond acceptor was proposed as the extraction solvent. The developed microextraction procedure assumed two simultaneous processes during the mixing of the sample and extraction solvent: the derivatization of the polar analyte in the presence of 4-methoxybenzaldehyde (component of the natural deep eutectic solvent) with the formation of a hydrophobic Schiff base (1); mass transfer of the Schiff base from the sample phase to the extraction solvent phase (2). Under optimal conditions, the limits of detection and quantification were 20 and 60 µg L-1, respectively. The RSD value was <10 %, the extraction recovery was 95 %. SIGNIFICANCE: In this work, the possibility of isoniazid derivatization in the natural deep eutectic solvent phase with the formation of the Schiff base was presented for the first time. The approach provided the separation and preconcentration of polar isoniazid without the use of expensive derivatization agents and solid-phase extraction cartridges. The formation of the Schiff base was confirmed by mass spectrometry.

Development of a dispersive solid phase microextraction method based on the application of MgAl, NiAl, and CoAl-layered double hydroxides for the efficient removal of α- and ß-naphthol isomers from water samples by capillary electrophoresis.

The present work describes a quick, simple, and efficient method based on the use of layered double hydroxides (LDH) coupled to dispersive solid phase micro-extraction (DSPME) to remove α-naphthol (α-NAP) and ß-naphthol (ß-NAP) isomers from water samples. Three different LDHs (MgAl-LDH, NiAl-LDH, and CoAl-LDH) were used to study how the interlayer anion and molar ratio affected the removal performance. The critical factors in the DSPME procedure (pH, LDH amount, contact time) were optimized by the univariate method under the optimal conditions: pH, 4-8; LDH amount, 5 mg; and contact time, 2.5 min. The method can be successfully applied in real sample waters, removing NAP isomers even in ultra-trace concentrations. The large volume sample stacking (LVSS-CE) technique provides limits of detections (LODs) of 5.52 µg/L and 6.36 µg/L for α-naphthol and ß-naphthol, respectively. The methodology's precision was evaluated on intra- and inter-day repeatability, with %RSD less than 10% in all cases. The MgAl/Cl--LDH selectivity was tested in the presence of phenol and bisphenol A, with a removal rate of >92.80%. The elution tests suggest that the LDH MgAl/Cl--LDH could be suitable for pre-concentration of α-naphthol and ß-naphthol in future works.

Cape Gooseberry (Physalis peruviana L.) Volatile Compounds Determination by Vacuum-Assisted Sorbent Extraction (VASE)-Selected Aspects.

Vacuum-Assisted Sorbent Extraction (VASE) is a novel extraction technique that uses vacuum to facilitate the transfer of volatile compounds from the matrix to the sorbent. This technique was explored for extraction of volatiles from cape gooseberry fruit, for both qualitative and quantitative analyses. Selected extraction parameters were tested: sample size, extraction temperature and time, influence of tissue disintegration on release of volatiles, and also addition of Ag+1 ions in the form of AgNO3 to stop enzymatic formation of volatile compounds. For selected conditions (10 g sample, extraction for 30 min. at 40 °C of volatiles from blended fruit) quantitative aspects were explored. Twenty-two compounds of cape gooseberry were tested. The method was characterized with a very good linearity in a range of 10-5000 µg/kg and good reproducibility. The experiments proved the usefulness of VASE in both volatile profiling and quantitative analyses of cape gooseberry and in prospective other fruit.

Water as a green solvent for sustainable sample preparation: single drop microextraction of N-nitrosamines from losartan tablets.

Water, renowned for its sustainability and minimal toxicity, is an ideal candidate for environmentally friendly solvent-based microextraction. However, its potential as an extractant solvent in miniaturized sample preparation remains largely unexplored. This paper pioneers using water as the extraction solvent in headspace single-drop microextraction (HS-SDME) for N-nitrosamines from losartan tablets. Autonomous HS-SDME is executed by an Arduino-controlled, lab-made Cartesian robot, using water for the online preconcentration of enriched extracts through direct injection into a column-switching system. Critical experimental parameters influencing HS-SDME performance are systematically explored through univariate and multivariate experiments. While most previously reported methods for determining N-nitrosamines in pharmaceutical formulations rely on highly selective mass spectrometry detection techniques to handle the strong matrix effects typical of pharmaceutical samples, the water-based HS-SDME method efficiently eliminates the interfering effects of a large amount of the pharmaceutical active ingredient and tablet excipients, allowing straightforward analysis using high-performance liquid chromatography with ultraviolet detection (HPLC-UV-Vis). Under optimized conditions, the developed method exhibits linear responses from 100 to 2400 ng g-1, demonstrating appropriate detectability, precision, and accuracy for the proposed application. Additionally, the environmental sustainability of the method is assessed using the AGREEprep methodology, positioning it as an outstanding green alternative for determining hazardous contaminants in pharmaceutical products.