Efficient Removal of Methylene Blue Dye from Aqueous Media Using Facilely Synthesized Magnesium Borate/Magnesium Oxide Nanostructures.

Methylene blue dye in water sources can pose health risks to humans, potentially causing methemoglobinemia, a condition that impairs the blood's ability to carry oxygen. Hence, the current study investigates the synthesis of novel magnesium borate/magnesium oxide (Mg3B2O6/MgO) nanostructures and their efficiency in removing methylene blue dye from aqueous media. The nanostructures were synthesized using the Pechini sol-gel method, which involves a reaction between magnesium nitrate hexahydrate and boric acid, with citric acid acting as a chelating agent and ethylene glycol as a crosslinker. This method helps in achieving a homogeneous mixture, which, upon calcination at 600 and 800 °C, yields Mg3B2O6/MgO novel nanostructures referred to as MB600 and MB800, respectively. The characterization of these nanostructures involved techniques like X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, N2 gas analyzer, and field-emission scanning electron microscope (FE-SEM). These analyses confirmed the formation of orthorhombic Mg3B2O6 and cubic MgO phases with distinct features, influenced by the calcination temperature. The mean crystal size of the MB600 and MB800 samples was 64.57 and 79.20 nm, respectively. In addition, the BET surface area of the MB600 and MB800 samples was 74.63 and 64.82 m2/g, respectively. The results indicated that the MB600 sample, with its higher surface area, generally demonstrated better methylene blue dye removal performance (505.05 mg/g) than the MB800 sample (483.09 mg/g). The adsorption process followed the pseudo-second-order model, indicating dependency on available adsorption sites. Also, the adsorption process matched well with the Langmuir isotherm, confirming a homogeneous adsorbent surface. The thermodynamic parameters revealed that the adsorption process was physical, exothermic, and spontaneous. The MB600 and MB800 nanostructures could be effectively regenerated using 6 M HCl and reused across multiple cycles. These findings underscore the potential of these nanostructures as cost-effective and sustainable adsorbents for methylene blue dye removal.

Solar evaporation of liquid marbles with Fe3O4/CNT hybrid nanostructures.

HYPOTHESIS: Through the rational design of nanomaterial composites, broadband light harvesting and good thermal insulation can be achieved simultaneously to improve the efficiency of water evaporation. EXPERIMENT: Solar evaporation experiments were carried out on liquid marbles (LMs) coated with Fe3O4 nanoparticles, carbon nanotubes (CNTs) and hybrid nanomaterials (Fe3O4/CNTs) with different mass ratios of 2:1, 1:1 and 1:2. FINDING: The results showed that the mixture of Fe3O4/CNTs enhances the light harvesting ability and solar interfacial evaporation performance. Fe3O4/CNT-LM at the mass ratio of 2:1 case provides the highest evaporation rate of 11.03 µg/s, which is about 1.22 and 1.34 times higher than that of Fe3O4 and CNT, respectively. This high performance is mainly due to the synergistic effect between Fe3O4 nanoparticles and CNTs, as the hybrid nanostructure significantly improves the both photothermal conversion and heat localization capability. Numerical simulation further supports that the composite can concentrate the electromagnetic field and heat at the phase-change interface. This leads to a rapid evaporation of the boundary region. This study provides a novel approach to a three-dimensional interface by assembling nanomaterials on the drop surface to enhance evaporation, which may have far-reaching implications for seawater desalination.

Real-Time Plasmonic Strain Sensors Based on Surface Relief Diffraction Gratings.

Large-scale diffraction gratings were fabricated in surface relief on azobenzene thin films and transferred to flexible PDMS substrates using soft lift-off lithography. The PDMS gratings were strained along the grating vector axis and the resulting surface topography was analyzed using diffraction angle measurements, AFM imagery and surface plasmon resonance (SPR) spectra. All measurement methods exhibited a linear response in strain indicating the useability of these sensors in real-world applications. For SPR-based strain sensing, an increasing pitch and a decreasing modulation depth were observed with increasing strain. The SPR peak shifted by ~1.0 nm wavelength and the SPR intensity decreased by ~0.3 a.u. per percentage of applied strain. The tested PDMS samples retained their integrity even after multiple cycles of stretching and relaxation, making them a suitable strain sensor.

0,1,2,3D nanostructures, types of bulk nanostructured materials, and drug nanocrystals: An overview.

Functional materials are required to meet the needs of society, such as environmental protection, energy storage and conversion, integrated product production, biological and medical processing. bulk nanostructured materials are a research concept that combines nanotechnology with other research fields such as supramolecular chemistry, materials science, and life science to develop logically functional materials from nanodevices. In this review article, nanostructures are synthetized by different methods based on the types and nature of the nanomaterials. In a broad sense "top-down" and "bottom-up" are the two foremost methods to synthesize nanomaterials. In top-down method bulk materials have been reduced to nanomaterials, and in case of bottom-up method, the nanomaterials are synthesized from elementary level. The different methods which are being used to synthesize nanomaterials are chemical vapor deposition method, thermal decomposition, hydrothermal synthesis, solvothermal method, pulsed laser ablation, templating method, combustion method, microwave synthesis, gas phase method, and conventional Sol-Gel method. We also briefly discuss the various physical and chemical methods for producing nanomaterials. We then discuss the applications of functional materials in many areas such as energy storage, supercapacitors, sensors, wastewater treatment, and other biological applications such as drug delivery and drug nanocrystals. Finally, future challenges in materials nanoarchitecture and concepts for further development of functional nanomaterials are briefly discussed.

Gradient nanoplasmonic imaging metasurface for rapid and label-free detection of SARS-CoV-2 sequences.

Compact and user-friendly nucleic acid biosensors play a crucial role in advancing infectious disease research, particularly for coronavirus (COVID-19). While nanophotonic metasurface sensors hold promise for high-performance sensing, they face challenges due to their complexity and bulky readout instruments. In this study, we propose a gradient nanoplasmonic imaging (GNI) metasurface that incorporates the concept of an optical potential well, enabling label-free single-step detection of SARS-CoV-2 sequences. The metasurface sensor consists of nanopillars with continuous variations, forming an optical potential well that results in a centimeter-scale dark ring. This dynamic well exhibits high sensitivity to refractive index changes, recorded by a CCD. To further enhance the visualized sensing performance, plasmonic coupling of gold nanoparticles with the gold nanostructure is employed. Our metasurface-based biosensor achieves rapid single-step detection of SARS-CoV-2 sequences, with a low detection limit of 77.2 pM and a detection range of 0.1-100 nM. This biosensor not only demonstrates exceptional reproducibility and outstanding detection performance, but also maintains remarkable specificity in differentiating SARS-CoV-2 from other diseases with similar symptoms. This simple and spectrometer-free refractometric sensing scheme enables the construction of a compact and cost-efficient prototype. Our imaging-based metasurface biosensing strategy demonstrates valuable merits for rapid, sensitive, and quantitative detection, showcasing its potential as a valuable on-site nucleic acid diagnostic tool.

Recent perspectives on the synergy of mesenchymal stem cells with micro/nano strategies in peripheral nerve regeneration-a review.

Despite the intrinsic repair of peripheral nerve injury (PNI), it is important to carefully monitor the process of peripheral nerve repair, as peripheral nerve regeneration is slow and incomplete in large traumatic lesions. Hence, mesenchymal stem cells (MSCs) with protective and regenerative functions are utilized in synergy with innovative micro/nano technologies to enhance the regeneration process of peripheral nerves. Nonetheless, as MSCs are assessed using standard regenerative criteria including sensory-motor indices, structural features, and morphology, it is challenging to differentiate between the protective and regenerative impacts of MSCs on neural tissue. This study aims to analyze the process of nerve regeneration, particularly the performance of MSCs with and without synergistic approaches. It also focuses on the paracrine secretions of MSCs and their conversion into neurons with functional properties that influence nerve regeneration after PNI. Furthermore, the study explores new ideas for nerve regeneration after PNI by considering the synergistic effect of MSCs and therapeutic compounds, neuronal cell derivatives, biological or polymeric conduits, organic/inorganic nanoparticles, and electrical stimulation. Finally, the study highlights the main obstacles to developing synergy in nerve regeneration after PNI and aims to open new windows based on recent advances in neural tissue regeneration.

Assembly of ligation chain reaction and DNA triangular prism for miRNA diagnostics.

Controllable assembly of DNA nanostructure provides a powerful way for quantitative analysis of various targets including nucleic acid molecules. In this study, we have designed detachable DNA nanostructures at electrochemical sensing interface and constructed a ligation chain reaction (LCR) strategy for amplified detection of miRNA. A three-dimensional DNA triangular prism nanostructure is fabricated to provide suitable molecule recognition environment, which can be further regenerated for additional tests via convenient pH adjustment. Target triggered LCR is highly efficient and specific towards target miRNA. Under optimal experimental conditions, this approach enables ultrasensitive exploration in a wide linear range with a single-base resolution. Moreover, it shows excellent performances for the analysis of cell samples and clinical serum samples.

Borophene: Synthesis, Chemistry, and Electronic Properties.

As a neighbor of carbon in the periodic table, boron exhibits versatile structural and electronic configurations, with its allotropes predicted to possess intriguing structures and properties. Since the experimental realization of two-dimensional (2D) boron sheets (borophene) on Ag(111) substrates in 2015, the experimental study of the realization and characteristics of borophene has drawn increasing interest. In this review, we summarize the synthesis and properties of borophene, which are mainly based on experimental results. First, the synthesis of borophene on different substrates, as well as borophane and bilayer borophene, featuring unique phases and properties, are discussed. Next, the chemistry of borophene, such as oxidation, hydrogenation, and its integration into heterostructures with other materials, is summarized. We also mention a few works focused on the physical properties of borophene, specifically its electronic properties. Lastly, the brief outlook addresses challenges toward practical applications of borophene and possible solutions.

Thermally Stable Oxide-Capsulated Metal Nanoparticles Structure for Strong Metal-Support Interaction via Ultrafast Laser Plasmonic Nanowelding.

Strong metal-support interaction (SMSI) has drawn much attention in heterogeneous catalysts due to its stable and excellent catalytic efficiency. However, construction of high-performance oxide-capsulated metal nanostructures meets great challenge in materials thermodynamic compatibility. In this work, dynamically controlled formation of oxide-capsulated metal nanoparticles (NPs) structures is demonstrated by ultrafast laser plasmonic nanowelding. Under the strong localized electromagnetic field interaction, metal (Au) NPs are dragged by an optical force toward oxide NPs (TiO2). Intense energy is simultaneously injected into this heterojunction area, where TiO2 is precisely ablated. With the embedding of metal into oxide, optical force on Au gradually turned from attractive to repulsive due to the varied metal-dielectric environment. Meanwhile, local ablated oxides are redeposited on Au NP. Upon the whole coverage of metal NP, the implantation behavior of metal NP is stopped, resulting in a controlled metal-oxide eccentric structure with capsulated oxide layer thickness ≈0.72-1.30 nm. These oxide-capsulated metal NPs structures can preserve their configurations even after thermal annealing in air at 600 °C for 10 min. This ultrafast laser plasmonic nanowelding can also extend to oxide-capsulated metal nanostructure fabrication with broad materials combinations (e.g., Au/ZnO, Au/MgO, etc.), which shows great potential in designing/constructing nanoscale high-performance catalysts.

Harnessing Biomimicry for Controlled Adhesion on Material Surfaces.

Nature serves as an abundant wellspring of inspiration for crafting innovative adhesive materials. Extensive research is conducted on various complex forms of biological attachment, such as geckos, tree frogs, octopuses, and mussels. However, significant obstacles still exist in developing adhesive materials that truly replicate the behaviors and functionalities observed in living organisms. Here, an overview of biological organs, structures, and adhesive secretions endowed with adhesion capabilities, delving into the intricate relationship between their morphology and function, and potential for biomimicry are provided. First, the design principles and mechanisms of adhesion behavior and individual organ morphology in nature are summarized from the perspective of structural and size constraints. Subsequently, the value of engineered and bioinspired adhesive materials through selective application cases in practical fields is emphasized. Then, a forward-looking gaze on the conceivable challenges and associated opportunities in harnessing biomimetic strategies and biological materials for advancing adhesive material innovation is highlighted and cast.

Structural color in the bacterial domain: The ecogenomics of a 2-dimensional optical phenotype.

Structural color is an optical phenomenon resulting from light interacting with nanostructured materials. Although structural color (SC) is widespread in the tree of life, the underlying genetics and genomics are not well understood. Here, we collected and sequenced a set of 87 structurally colored bacterial isolates and 30 related strains lacking SC. Optical analysis of colonies indicated that diverse bacteria from at least two different phyla (Bacteroidetes and Proteobacteria) can create two-dimensional packing of cells capable of producing SC. A pan-genome-wide association approach was used to identify genes associated with SC. The biosynthesis of uroporphyrin and pterins, as well as carbohydrate utilization and metabolism, was found to be involved. Using this information, we constructed a classifier to predict SC directly from bacterial genome sequences and validated it by cultivating and scoring 100 strains that were not part of the training set. We predicted that SCr is widely distributed within gram-negative bacteria. Analysis of over 13,000 assembled metagenomes suggested that SC is nearly absent from most habitats associated with multicellular organisms except macroalgae and is abundant in marine waters and surface/air interfaces. This work provides a large-scale ecogenomics view of SC in bacteria and identifies microbial pathways and evolutionary relationships that underlie this optical phenomenon.

Graphitic Carbon Nitride Structures on Carbon Cloth Containing Ultra- and Nano-Dispersed NiO for Photoactivated Oxygen Evolution.

The development of low-cost and high-efficiency oxygen evolution reaction (OER) photoelectrocatalysts is a key requirement for H2 generation via solar-assisted water splitting. In this study, we report on an amenable fabrication route to carbon cloth-supported graphitic carbon nitride (gCN) nanoarchitectures, featuring a modular dispersion of NiO as co-catalyst. The synergistic interaction between gCN and NiO, along with the tailoring of their size and spatial distribution, yield very attractive OER performances and durability in freshwater splitting, of great significance for practical end-uses. The potential of gCN electrocatalysts containing ultra-dispersed, i. e. "quasi-atomic" NiO, exhibiting a higher activity than the ones containing nickel oxide nanoaggregates, is further highlighted by their activity even in real seawater. This work suggests that efficient OER catalysts can be designed through the construction of optimized interfaces between transition metal oxides and carbon nitride, yielding inexpensive and promising noble metal-free systems for real-world applications.

Helical au nanostructure for SERS detection of hazardous molecular and chiral enantiomers.

In recent years, incidents of pesticide pollution and abuse of feed additives have occurred frequently, which pose a great threat to human health. Raman spectroscopy has become an important method in the field of food safety due to its rapidity, simplicity and sensitivity. It is important to obtain complex structure to promote surface-enhanced Raman scattering (SERS) effect. In this study, gold helical nanoparticles with rich surface structure were synthesized using cysteine as induce agent. Notably, the complex helical structure and tip led to an excellent electromagnetic enhancement property. The helical structure showed ultra-sensitive detection of hazardous molecular, such as thiram and ractopamine. Interestingly, the D/L-Au structure had significant chiral optical activity and could be used as an unlabeled SERS platform for enantiomer identification. This study provided an effective strategy for the detection of pesticides and feed additives, which could be applied in other aspects of food safety in the future.

Crystal-Phase-Selective Etching of Heterophase Au Nanostructures.

Selective oxidative etching is one of the most effective ways to prepare hollow nanostructures and nanocrystals with specific exposed facets. The mechanism of selective etching in noble metal nanostructures mainly relies on the different reactivity of metal components and the distinct surface energy of multimetallic nanostructures. Recently, phase engineering of nanomaterials (PEN) offers new opportunities for the preparation of unique heterostructures, including heterophase nanostructures. However, the synthesis of hollow multimetallic nanostructures based on crystal-phase-selective etching has been rarely studied. Here, a crystal-phase-selective etching method is reported to selectively etch the unconventional 4H and 2H phases in the heterophase Au nanostructures. Due to the coating of Pt-based alloy and the crystal-phase-selective etching of 4H-Au in 4H/face-centered cubic (fcc) Au nanowires, the well-defined ladder-like Au@PtAg nanoframes are prepared. In addition, the 2H-Au in the fcc-2H-fcc Au nanorods and 2H/fcc Au nanosheets can also be selectively etched using the same method. As a proof-of-concept application, the ladder-like Au@PtAg nanoframes are used for the electrocatalytic hydrogen evolution reaction (HER) in acidic media, showing excellent performance that is comparable to the commercial Pt/C catalyst.

Bottom-up Synthesis of Highly Chiral 1T Molybdenum Disulfide Nanosheets.

Chirality in inorganic nanostructures has recently stimulated the attention of many researchers, both to unravel fundamental questions on the origin of chirality in inorganic and hybrid materials, as well as to introduce novel promising properties that are originated by the symmetry breaking. MoS2 is one of the most investigated among the large family of layered transition metal dichalcogenides. In particular, the metastable metallic 1T-MoS2 phase is of large interest for potential applications. However, due to thermodynamic reasons, the synthesis of 1T-MoS2 phase is quite challenging. Herein, we present the first synthesis of chiral 1T-MoS2 phase which shows remarkably high chiroptical activity with a g-factor up to 0.01. Chiral 1T-MoS2 was produced using tartaric acid as a chiral ligand to induce symmetry breaking during the material's growth under hydrothermal conditions, leading to the formation of distorted hierarchical nanosheet assemblies exhibiting chiral morphology. Thorough optimization of the synthetic conditions was carried out to maximize chiroptical activity, which is strongly related to the nanostructures' morphology. Finally, the formation mechanism of the chiral 1T-MoS2 nanosheet assemblies was investigated, focusing on the role of molecular intermediates in the growth of the nanosheets and the transfer of chirality.

Supramolecular Self-Assembled Nanostructures Derived from Amplified Structural Isomerism of Zn(II)-Sn(IV)-Zn(II) Porphyrin Triads and Their Visible Light Photocatalytic Degradation of Pollutants.

Two structural isomeric porphyrin-based triads (Zn(II)porphyrin-Sn(IV)porphyrin-Zn(II)porphyrin) denoted as T1 and T2 were prepared from the reaction of meso-[5-(4-hydroxyphenyl)-10,15,20-tris(3,5-di-tert-butylphenyl)porphyrinato]zinc(II) (ZnL) with trans-dihydroxo-[5,10-bis(3-pyridyl)-15,20-bis(phenyl)porphyrinato]tin(IV) (SnP1) and trans-dihydroxo-[5,15-bis(3-pyridyl)-10,20-bis(phenyl)porphyrinato]tin(IV) (SnP2), respectively. All the compounds were characterized using UV-vis spectroscopy, emission spectroscopy, ESI-MS, 1H NMR spectroscopy, and FE-SEM. Most importantly, the two structurally isomeric porphyrin-based triads supramolecularly self-assembled into completely different nanostructures. T1 exhibits a nanosphere morphology, whereas T2 exhibits a nanofiber morphology. The amplified geometric feature in the structural isomeric porphyrin-based triads dictates the physical and chemical properties of the two triads. Both compounds showed the morphology-dependent visible light catalytic photodegradation of rhodamine B dye (74-97% within 90 min) and tetracycline antibiotic (44-71% within 45 min) in water. In both cases, the photodegradation efficiency of T2 was higher than that of T1. The present investigation can significantly contribute to the remediation of wastewater by tuning the conformational changes in porphyrin-based photocatalysts.

KF-Containing Interphase Formation Enables Better Potassium Ion Storage Capability.

Rechargeable potassium ion batteries have long been regarded as one alternative to conventional lithium ion batteries because of their resource sustainability and cost advantages. However, the compatibility between anodes and electrolytes remains to be resolved, impeding their commercial adoption. In this work, the K-ion storage properties of Bi nanoparticles encapsulated in N-doped carbon nanocomposites have been examined in two typical electrolyte solutions, which show a significant effect on potassium insertion/removal processes. In a KFSI-based electrolyte, the N-C@Bi nanocomposites exhibit a high specific capacity of 255.2 mAh g-1 at 0.5 A g-1, which remains at 245.6 mAh g-1 after 50 cycles, corresponding to a high capacity retention rate of 96.24%. In a KPF6-based electrolyte, the N-C@Bi nanocomposites show a specific capacity of 209.0 mAh g-1, which remains at 71.5 mAh g-1 after 50 cycles, corresponding to an inferior capacity retention rate of only 34.21%. Post-investigations reveal the formation of a KF interphase derived from salt decomposition and an intact rod-like morphology after cycling in K2 electrolytes, which are responsible for better K-ion storage properties.

Biomimetic nanomedicine cocktail enables selective cell targeting to enhance ovarian Cancer chemo- and immunotherapy.

Ovarian cancer is one of the deadliest cancers, and combined chemo- and immunotherapies are potential strategies to combat it. However, the anti-cancer efficacy of the combined therapies may be limited by the non-selective co-delivery of chemotherapy and immunotherapy. Herein, a combined chemo- and immunotherapy is designed to selectively target ovarian tumor (ID8) cells and dendritic cells (DCs) using ID8 cell membrane (IM) and bacterial outer membrane vesicles (OMVs), respectively. Doxorubicin (DOX) and Ovalbumin (OVA) peptide (OVA257-264) are chosen as model chemotherapy and immunotherapy agents, respectively. A DNA nanocube capable of easily loading DOX or OVA257-264 is chosen as the carrier. Firstly, the DNA nanocube is used to load DOX or OVA257-264 to prepare cube-DOX or cube-OVA. This nanocube was then encapsulated with IM to form IM@Cube-DOX and with OMV to form OMV@Cube-OVA. IM@Cube-DOX can be selectively taken up by ID8 cells, leading to effective cell killing, while OMV@Cube-OVA targets and activates DC2.4 cells in vitro. Both IM@Cube-DOX and OMV@Cube-OVA show increased accumulation at ID8 tumors in C57BL/6 mice. Combined IM@Cube-DOX + OMV@Cube-OVA therapy demonstrates better anti-tumor efficacy than non-selective delivery methods such as OMV@(Cube-DOX + Cube-OVA) or IM@(Cube-DOX + Cube-OVA) in ID8-OVA tumor-bearing mice. In conclusion, this study demonstrates a biomimetic delivery strategy that enables selective drug delivery to tumor cells and DCs, thereby enhancing the anti-tumor efficacy of combined chemo- and immunotherapy through the selective delivery strategy.

Cutting-edge Approach of Carbon Nanostructures: Targeted Drug Delivery to Central Nervous System.

Drug delivery through the blood-brain barrier (BBB) is one of the key challenges in the modern era of medicine due to the highly semipermeable characteristics of BBB that restrict the entry of various drugs into the central nervous system (CNS) for the management of brain disorders. Drugs can be easily incorporated into carbon nanocarriers that can cross the bloodbrain barrier. Numerous nanocarriers have been developed, including polymeric nanoparticles, carbon nanoparticles, lipid-based nanoparticles, etc. Among these, carbon nanostructures could be superior due to their easier BBB penetration and strong biocompatibility. Several CDs (Carbon dots) and CD-ligand conjugates have explored effectively penetrating the BBB, which enables significant progress in using CD-based drug delivery systems (DDS) to manage CNS diseases. Despite the drug delivery applications, they might also be used as a central nervous system (CNS) drug; few of the carbon nanostructures show profound neurodegenerative activity. Further, their impact on neuronal growth and anti- amyloid action is quite interesting. The present study covers diverse carbon nanostructures for brain-targeted drug delivery, exploring a variety of CNS activities. Moreover, it emphasizes recent patents on carbon nanostructures for CNS disorders.