The Application Progress of Nonthermal Plasma Technology in the Modification of Bone Implant Materials.

With the accelerating trend of global aging, bone damage caused by orthopedic diseases, such as osteoporosis and fractures, has become a shared international event. Traffic accidents, high-altitude falls, and other incidents are increasing daily, and the demand for bone implant treatment is also growing. Although extensive research has been conducted in the past decade to develop medical implants for bone regeneration and healing of body tissues, due to their low biocompatibility, weak bone integration ability, and high postoperative infection rates, pure titanium alloys, such as Ti-6A1-4V and Ti-6A1-7Nb, although widely used in clinical practice, have poor induction of phosphate deposition and wear resistance, and Ti-Zr alloy exhibits a lack of mechanical stability and processing complexity. In contrast, the Ti-Ni alloy exhibits toxicity and low thermal conductivity. Nonthermal plasma (NTP) has aroused widespread interest in synthesizing and modifying implanted materials. More and more researchers are using plasma to modify target catalysts such as changing the dispersion of active sites, adjusting electronic properties, enhancing metal carrier interactions, and changing their morphology. NTP provides an alternative option for catalysts in the modification processes of oxidation, reduction, etching, coating, and doping, especially for materials that cannot tolerate thermodynamic or thermosensitive reactions. This review will focus on applying NTP technology in bone implant material modification and analyze the overall performance of three common types of bone implant materials, including metals, ceramics, and polymers. The challenges faced by NTP material modification are also discussed.

Plasma Induced Atomic-Scale Soldering Enhanced Efficiency and Stability of Electrocatalysts for Ampere-Level Current Density Water Splitting.

Industrial water electrolysis typically operates at high current densities, the efficiency and stability of catalysts are greatly influenced by mass transport processes and adhesion with substrates. The core scientific issues revolve around reducing transport overpotential losses and enhancing catalyst-substrate binding to ensure long-term performance. Herein, vertical Ni-Co-P is synthesized and employed plasma treatment for dual modification of its surface and interface with the substrate. The (N)Ni-Co-P/Ni3N cathode exhibits an ultra-low overpotential of 421 mV at 4000 mA cm-2, and the non-noble metal system only requires a voltage of 1.85 V to reach 1000 mA cm-2. When integrated into an anion exchange membrane (AEM) electrolyzer, it can operate stably for >300 h at 500 mA cm-2. Under natural light, the solar-driven AEM electrolyzer operates at a current density up to 1585 mA cm-2 with a solar-to-hydrogen efficiency (SHT) of 9.08%. Density functional theory (DFT) calculations reveal that plasma modification leads to an "atomic-scale soldering" effect, where the Ni3N strong coupling with the Co increases free charge density, simultaneously enhancing stability and conductivity. This research offers a promising avenue for optimizing ampere-level current density water splitting, paving the way for efficient and sustainable industrial hydrogen production.

Influence of handheld nonthermal plasma on shear bond strength of polyaryletherketone to resin-matrix cement.

Background/purpose: Challenges exist regarding the bonding efficiency of polyaryletherketone (PAEK), a high-performance thermoplastic, attributed to its chemical inertness and hydrophobic surface, hindering effective bonding with resin-matrix cement. This research explored the impact of handheld nonthermal plasma (HNP), under varying operational parameters, on PAEK surface wettability and changes in bonding performance with cement. Materials and methods: Three types of disc-shaped PEAK specimens were prepared, with surface treatments categorized as grinding, airborne-particle abrasion (APB), and HNP. Surface wettability was analyzed using a contact angle analyzer (n = 10). Specimens were bonded with resin cement and subjected to artificial aging tests: distilled water bath (NA), thermocycling, and highly accelerated stress tests (n = 10 for each test). Shear bond strength (SBS) was measured, failure modes were analyzed, and statistical analyses were conducted. Results: The HNP markedly improved PAEK surface wettability, achieving superhydrophilicity (P < 0.05). This effect intensified with extended operation times (30 or 60 s) and reduced elapsed times (<30 s). HNP-treated PAEK exhibited higher SBS than APB (P < 0.05) and maintained bonding durability after artificial aging, particularly in ketone-enriched variants. Failure analysis revealed predominantly adhesive failure under APB-NA treatment, mixture failures under HNP-NA treatment and postaging, but no cohesive failure. Conclusion: The HNP device benefits dental settings by transforming the PAEK surface into superhydrophilic properties, thereby improving PAEK-cement bonding. It significantly enhances bond durability within 30 s of operation and after a 30 s elapsed period. It is noteworthy that ketone-enriched PAEK demonstrates markedly improved bonding performance.

Effects of handheld nonthermal plasma on the biological responses, mineralization, and inflammatory reactions of polyaryletherketone implant materials.

Background/purpose: The handheld nonthermal plasma (HNP) treatment may alter the surface properties, bone metabolism, and inflammatory reactions of polyaryletherketone (PAEK) dental implant materials. This study tested whether the HNP treatment might increase the biocompatibility, surface hydrophilicity, surface free energies (SFEs), and the cell adhesion and mineralization capability of PAEK materials. Materials and methods: Disk-shaped samples of titanium (Ti), zirconia (Zr), polyetheretherketone (PEEK [PE]), and polyetherketoneketone (PEKK [PK]) were subjected to HNP treatment and termed as TiPL, ZrPL, PEPL, and PKPL, respectively. Water-surface reactions were examined using a goniometer. MG-63 cells were cultured on all samples to assess the cell viability, cytotoxicity, cell attachment, and mineralization characteristics. The expression of pro-inflammatory cytokines (tumor necrosis factor-alpha and interleukin-6) and key mineralization markers (alkaline phosphatase [ALKP], osteopontin [OPN], and dentin matrix protein 1 [DMP1]) was measured using enzyme-linked immunosorbent assay kits. Results: The HNP-treated samples exhibited significantly enhanced surface hydrophilicities and SFEs compared to the untreated samples. The cell viability remained high across all samples, indicating no cytotoxic effects. The HNP treatment significantly enhanced MG-63 cell adherence and proliferation. Elevated levels of ALKP and OPN were observed for the plasma-treated PEPL and PKPL specimens, while DMP1 levels increased significantly only in the PKPL specimen. Pro-inflammatory cytokine levels were low across all samples, suggesting no inflammatory response. Conclusion: The HNP-treated PAEKs have enhanced the surface hydrophilicity and SFEs as well as superior cell adhesion and mineralization capability, and thus may be good clinical dental implant materials.

Impact of Nonthermal Plasma Treatment on the Oxidation of Lipids with Different Unsaturation Degrees.

Nonthermal plasma (NTP) treatment of food presents a new technology for the industry but raises concerns about lipid oxidation due to the presence of reactive species. Considering the critical role of the degree of unsaturation in lipid oxidation, this study investigates NTP-induced oxidation across various unsaturated lipids. These lipids are six oil samples primarily containing one of the following methylesters: oleate, linoleate, linolenate, arachidonate, eicosapentaenoate, and docosahexaenoate. Samples were treated with a nonthermal surface dielectric barrier discharge. Plasma-induced effects were first examined by classical lipid oxidation indicators, such as the peroxide value and p-anisidine value. The specific volatile oxidation products, including hexanal, nonanal, trans-2-hexenal, and methyl 9-oxononanoate, were determined to further elucidate the impact of ozone-related oxidation. Monitoring the production of selected nonvolatile oxidation products, such as epoxy-, oxo-, and hydroxy fatty acid methylesters, confirmed that plasma treatment facilitated the decomposition of lipid hydroperoxide. Generally, the level of plasma-induced oxidation increased in parallel with the unsaturation degree of the studied samples, except for the quantity of individual volatile carbonyls. The long-term effect of NTP treatment was investigated by a stability test, revealing that the oxidative stability depended on the input gas of plasma treatment, the sensitivity of the treated sample, and the presence of antioxidants. Except for the focus on the NTP impact, this study offered a case study of a comprehensive investigation into lipid oxidation.

Effects of in-package cold plasma treatment on poultry breast meat packaged in high CO2 atmosphere.

High CO2 in packages significantly extends microbiological shelf life of poultry meat. Cold plasma is an emerging antimicrobial treatment, which generates various reactive gas species and inactivates microbials effectively. The objective of this study was to explore the potential effects of combining high CO2 package and in-package cold plasma (IPCP) treatments on the quality and safety of raw chicken breast meat. Noninoculated samples and samples inoculated with Campylobacter jejuni and Salmonella Typhimurium were packaged in 0, 30, 70, or 100% CO2 (with make-up gas N2) and treated with IPCP at 70 kV for 3 min. Ozone formation, microbial counts, drip loss, pH, and color were measured. There was no interaction effect between high CO2 package and IPCP on microbial counts, drip loss, and color measurements. IPCP reduced spoilage microbial growth by 0.43 log (from 7.00 log to 6.57 log, P = 0.033) and C. jejuni populations by 0.67 log (from 4.82 log to 4.15 log, P < 0.001) on meat surface but did not affect S. Typhimurium (P = 0.206). Increased CO2 in packages had more effect on spoilage microbial growth (more than 1.5 log from 8.08 log to 6.35 log, P < 0.001) and S. Typhimurium populations (more than 0.5 log from 4.94 log to 4.39 log, P = 0.004) than IPCP but did not affect C. jejuni (P = 0.163). IPCP resulted in increases in changes in L* by 1.67 units (0.70 vs. 2.37, P = 0.016) and a* values by 0.56 units (0.73 vs. 1.29, P < 0.001) and decreases in b* values by 0.91 units (0.46 versus -0.45, P = 0.015). High CO2 levels caused increases in changes in L* values by 4.35 units (-0.82 versus 3.53, P < 0.001) with no effects on a* and b* values (P > 0.05). Data demonstrate that there are no combined effects by high CO2 package and IPCP on meat quality and safety of raw chicken breast meat under our experimental conditions. Either high CO2 package or IPCP can retain microbial quality and safety, even though they may cause changes in appearance of stored chicken breast meat.

Chemical and physical changes induced by cold plasma treatment of foods: A critical review.

Cold plasma treatment is an innovative technology in the food processing and preservation sectors. It is primarily employed to deactivate microorganisms and enzymes without heat and chemical additives; hence, it is often termed a "clean and green" technology. However, food quality and safety challenges may arise during cold plasma processing due to potential chemical interactions between the plasma reactive species and food components. This review aims to consolidate and discuss data on the impact of cold plasma on the chemical constituents and physical and functional properties of major food products, including dairy, meat, nuts, fruits, vegetables, and grains. We emphasize how cold plasma induces chemical modification of key food components, such as water, proteins, lipids, carbohydrates, vitamins, polyphenols, and volatile organic compounds. Additionally, we discuss changes in color, pH, and organoleptic properties induced by cold plasma treatment and their correlation with chemical modification. Current studies demonstrate that reactive oxygen and nitrogen species in cold plasma oxidize proteins, lipids, and bioactive compounds upon direct contact with the food matrix. Reductions in nutrients and bioactive compounds, including polyunsaturated fatty acids, sugars, polyphenols, and vitamins, have been observed in dairy products, vegetables, fruits, and beverages following cold plasma treatment. Furthermore, structural alterations and the generation of volatile and non-volatile oxidation products were observed, impacting the color, flavor, and texture of food products. However, the effects on dry foods, such as seeds and nuts, are comparatively less pronounced. Overall, this review highlights the drawbacks, challenges, and opportunities associated with cold plasma treatment in food processing.

Atmospheric cold plasma as a novel approach to remediating microplastics pollution in water.

Microplastics (MPs) have become an environmental and health threat to aquatic species and humans because they are small and can easily reach water bodies for municipal and agricultural uses. MPs have been traced in food commodities and products derived from animals and even found in bottles of drinking water. Current treatment techniques for permanently destroying MPs require high energy inputs and thus are generally cost-inefficient. Atmospheric cold plasma (ACP) is a low-cost energy-efficient technology to produce highly reactive species that can induce physicochemical changes in plastic polymers. This study, for the first time, used ACP as a novel method for MPs treatment. Polypropylene (PP) and low-density polyethylene (LDPE) were used to prepare model MPs. The effects of plasma working gas (oxygen, nitrogen, or their mixture) and post-ACP treatment storage (24 h) on MPs were studied. ACP treatments for 30 min successfully degraded both MPs, by 1.4-11.3% in weight. PP MPs had larger weight reduction than LDPE and the ACP of mixture gas was most effective. PP MPs also showed increased carbonyl index after treatments, to up to 6.89, indicating hydrolytic degradation. For LDPE MPs, oxygen ACP caused more oxidation, but storage did not have an enhancing effect. The results of physicochemical analyses indicated that MPs degradation by ACP was possibly mainly through oxidative and hydrolytic reactions, but further characterizations are needed. This study proves that ACP is a promising strategy to remediate MPs pollution, and thus has great potential for addressing the severe challenges of MPs that the food and agriculture sectors are currently facing.

Plasma-induced, N-doped, and reduced graphene oxide-incorporated NiCo-layered double hydroxide nanowires as a high-capacity redox mediator for sustainable decoupled water electrolysis.

Although the recent emergence of decoupled water electrolysis prevents typical H2/O2 mixing, the further development of decoupled water electrolysis has been confined by the lack of reliable redox mediator (RM) electrodes to support sustainable H2 production. As energy storage electrodes, layered double hydroxides (LDHs) possess inherently poor conductivity/stability, which can be improved by growing LDHs on graphene substrates in situ. The proper modification of the graphene surface structure can improve the electron transport and energy storage capacity of composite electrodes, while current methods are usually cumbersome and require high temperatures/chemical reagents. Therefore, in this study, dip coating was adopted to grow graphene oxide (GO) on nickel foam (NF). Then, the GO was reduced using nonthermal plasma (NTP) to reduced GO (rGO) in situ while simultaneously implementing N doping to obtain plasma-assisted N-doped rGO on NF (PNrGO/NF). The uniform conductive substrate ensured the subsequent growth of less-aggregated NiCo-LDH nanowires, which improved the conductivity and energy storage capacity (5.93 C/cm2 at 5 mA/cm2) of the NiCo-LDH@PNrGO/NF. For the decoupled system, the composite RM electrode exhibited a high buffering capacity for 1300 s during the decoupled H2/O2 evolution, and in the conventional coupled system, the necessary input voltage of 1.67 V was separated into two lower ones, 1.42/0.33 V for H2/O2 evolutions, respectively. Simultaneously, the RM possessed outstanding redox reversibility and structural stability during long-term cycling. This work could offer a feasible strategy for using NTP to synthesize excellent RM electrodes for application to decoupled water electrolysis.

Nonthermal plasma processing catalyzed by CuFe2O4 for organic pollutants remediation and bacterial inactivation with density functional theory.

The suggested nonthermal plasma has been employed for organic pollutants remediation and bacterial inactivation with catalyst (CuFe2O4) via reactive oxygen and nitrogen species, along with catalytic density functional theory processing. The plasma generated species O2- (g.), OH• (g.), H2O2 (aq.), and NOx (aq.) are used for the remediation of organic pollutants, such as reactive black5 and bromocresol green with catalytic oxidative and reductive transformation, like as from Fe2+ (aq.) to Fe3+ (aq.) and from Cu2+ (aq.) to Cu1+ (aq.), respectively. In the presence of plasma with CuFe2O4, the pollutants remediation enhanced more, which is 95 ± 0.78%, rather than only plasma. After removal of pollutants, the plasma processing catalyzed by CuFe2O4 was highly inactivated the E. coli. bacterial growth, which inhibition rate is 100 ± 0.87% and 100 ± 0.69% for reactive black5 and bromocresol green, rather than only plasma, such as 86.41 ± 0.91% and 73.91 ± 0.56%, respectively. The CuFe2O4 generated super oxides (O2- (aq.)) and hydroxides (H+(aq.), OH⦁(aq.), and OOH⦁(aq.)) are rapidly react with bacteria to damage the bacterial cell membrane via catalytic redox process. However, the plasma generated species were react with catalyst to produce the e- charge densities under the redox transformation of spin orientation (±) 0.58 e-, which is 0.007, 0.009, and 0.005 electrons per cubic Angstrom, for CuFe2O4, H2O2(aq.), and NOx(aq.). The plasma generated species concentrations were quantified in the deionized water, which are H2O2(aq.) (145 ± 0.91 µM) and NOx(aq.) (112 ± 0.56 µM), respectively. After eradication of pollutants, the water pH was observed, which is near to the neutral at 6.57 ± 0.27 under the catalytic binary redox process. Moreover, the catalytic stability examined via reusability test, which were four cycles for reactive black5 and three cycles for bromocresol green. Furthermore, the CuFe2O4 nanoparticles conducted several characterizations to analyze the various properties, such as crystal, surface, functional, and elemental.

Modeling the growth of Aspergillus brasiliensis affected by a nonthermal plasma.

AIM: The main objective of the study was to develop and validate a model for the growth of Aspergillus brasiliensis on surfaces, specifically on agar culture medium. An additional aim was to determine conditions for complete growth inhibition of this micromycete using two different nonthermal plasma (NTP) sources. METHODS AND RESULTS: The developed model uses two key parameters, namely the growth rate and growth delay, which depend on the cultivation temperature and the amount of inoculum. These parameters well describe the growth of A. brasiliensis and the effect of NTP on it. For complete fungus inactivation, a single 10-minute exposure to a diffuse coplanar surface barrier discharge was sufficient, while a point-to-ring corona discharge required several repeated 10-minute exposures at 24-h intervals. CONCLUSIONS: The article presents a model for simulating the surface growth of A. brasiliensis and evaluates the effectiveness of two NTP sources in deactivating fungi on agar media.

Human coronavirus 229E inactivation on porous and nonporous materials using dielectric barrier discharge (DBD) plasma.

Viruses can spread through contaminated aerosols and contaminated surface materials, and effective disinfection techniques are essential for virus inactivation. Nonthermal plasma-generated reactive oxygen and nitrogen species can effectively inactivate the coronavirus. We aim to interpret the coronavirus inactivation level and mechanism of surface interaction with materials with and without dielectric barrier discharge (DBD) plasma treatment. Nonthermal plasma, particularly surface-type DBD plasma, can inactivate human coronavirus 229E (HCoV-229E) on porous (paper, wood, mask) and nonporous (plastic, stainless steel, glass, Cu) materials. Virus inactivation was analyzed using a 50% tissue culture infectivity dose (TCID50) using cell line, flow cytometry, and immunofluorescence. Surfaces contaminated with HCoV-229E were treated at different time intervals (0-5 h) with and without plasma exposure (natural decay in ambient air conditions). HCoV-229E persistence conformed to the following order: plastic > cover glass > stainless steel > mask > wood > paper > Cu with and without plasma exposure. HCoV-229E was more stable in plastic, cover glass, and stainless steel in 5 h, and the viable virus titer gradually decreased from its initial log10 order of 6.892 to 1.72, 1.53, and 1.32 TCID50/mL, respectively, under plasma exposure. No virus was observed in Cu after treatment for 5 h. The use of airflow, ambient nitrogen, and argon did not promote virus inactivation. Flow cytometry and immunofluorescence analysis demonstrated a low expression level of spike protein (fluorescence intensity) during plasma treatment and in E and M genes expression compared with the virus control.

Novel Nonthermal Atmospheric Plasma Irradiation of Titanium Implants Promotes Osteogenic Effect in Osteoporotic Conditions.

Osteoporosis is a metabolic disease characterized by bone density and trabecular bone loss. Bone loss may affect dental implant osseointegration in patients with osteoporosis. To promote implant osseointegration in osteoporotic patients, we further used a nonthermal atmospheric plasma (NTAP) treatment device previously developed by our research group. After the titanium implant (Ti) is placed into the device, the working gas flow and the electrode switches are turned on, and the treatment is completed in 30 s. Previous studies showed that this NTAP device can remove carbon contamination from the implant surface, increase the hydroxyl groups, and improve its wettability to promote osseointegration in normal conditions. In this study, we demonstrated the tremendous osteogenic enhancement effect of NTAP-Ti in osteoporotic conditions in rats for the first time. Compared to Ti, the proliferative potential of osteoporotic bone marrow mesenchymal stem cells on NTAP-Ti increased by 180% at 1 day (P = 0.004), while their osteogenic differentiation increased by 149% at 14 days (P < 0.001). In addition, the results indicated that NTAP-Ti significantly improved osseointegration in osteoporotic rats in vivo. Compared to the Ti, the bone volume fraction (BV/TV) and trabecular number (Tb.N) values of NTAP-Ti in osteoporotic rats, respectively, increased by 18% (P < 0.001) and 25% (P = 0.007) at 6 weeks and the trabecular separation (Tb.Sp) value decreased by 26% (P = 0.02) at 6 weeks. In conclusion, this study proved a novel NTAP irradiation titanium implant that can significantly promote osseointegration in osteoporotic conditions.

Nonthermal Atmospheric Pressure Plasma Treatment of Endosteal Implants for Osseointegration and Antimicrobial Efficacy: A Comprehensive Review.

The energy state of endosteal implants is dependent on the material, manufacturing technique, cleaning procedure, sterilization method, and surgical manipulation. An implant surface carrying a positive charge renders hydrophilic properties, thereby facilitating the absorption of vital plasma proteins crucial for osteogenic interactions. Techniques to control the surface charge involve processes like oxidation, chemical and topographical adjustments as well as the application of nonthermal plasma (NTP) treatment. NTP at atmospheric pressure and at room temperature can induce chemical and/or physical reactions that enhance wettability through surface energy changes. NTP has thus been used to modify the oxide layer of endosteal implants that interface with adjacent tissue cells and proteins. Results have indicated that if applied prior to implantation, NTP strengthens the interaction with surrounding hard tissue structures during the critical phases of early healing, thereby promoting rapid bone formation. Also, during this time period, NTP has been found to result in enhanced biomechanical fixation. As such, the application of NTP may serve as a practical and reliable method to improve healing outcomes. This review aims to provide an in-depth exploration of the parameters to be considered in the application of NTP on endosteal implants. In addition, the short- and long-term effects of NTP on osseointegration are addressed, as well as recent advances in the utilization of NTP in the treatment of periodontal disease.

Nonthermal plasma air disinfection for the inactivation of airborne microorganisms in an experimental chamber and indoor air.

AIMS: Airborne transmission of diseases presents a serious threat to human health, so effective air disinfection technology to eliminate microorganisms in indoor air is very important. This study evaluated the effectiveness of a non-thermal plasma (NTP) air disinfector in both laboratory experiments and real environments. METHODS AND RESULTS: An experimental chamber was artificially polluted with a bioaerosol containing bacteria or viruses. Additionally, classroom environments with and without people present were used in field tests. Airborne microbial and particle concentrations were quantified. A 3.0 log10 reduction in the initial load was achieved when a virus-containing aerosol was disinfected for 60 min and a bacteria-containing aerosol was disinfected for 90 min. In the field test, when no people were present in the room, NTP disinfection decreased the airborne microbial and particle concentrations (P < 0.05). When people were present in the room, their constant activity continuously contaminated the indoor air, but all airborne indicators decreased (P < 0.05) except for planktonic bacteria (P = 0.094). CONCLUSIONS: NTP effectively inactivated microorganisms and particles in indoor air.

Nonthermal Plasma Synthesis of Metallic Ti Nanocrystals.

Nanoscale metallic titanium (Ti) offers unique energetic and biocompatible characteristics for the aerospace and biomedical industries. A rapid and sustainable method to form purified Ti nanocrystals is still in demand due to their high oxygen affinity. Herein, we report the production of highly purified Ti nanoparticles with a nonequilibrium face center cubic (FCC) structure from titanium tetrachloride (TiCl4) via a capacitively coupled plasma (CCP) route. Furthermore, we demonstrate a secondary H2 treatment plasma as an effective strategy to improve the air stability of a thin layer of nanoparticles by further removal of chlorine from the particle surface. Hexagonal and cubic-shaped Ti nanocrystals of high purity were maintained in the air after the secondary H2 plasma treatment. The FCC phase potentially originates from small-sized grains in the initial stage of nucleation inside the plasma environment, which is revealed by a size evolution study with variations of plasma power input.

Dental silicate ceramics surface modification by nonthermal plasma: A systematic review.

OBJECTIVES: Nonthermal atmospheric or low-pressure plasma (NTP) can improve the surface characteristics of dental materials without affecting their bulk properties. This study aimed to systematically review the available scientific evidence on the effectiveness of using NTP for the surface treatment of etchable, silica-based dental ceramics before cementation, and elucidate its potential to replace the hazardous and technically demanding protocol of hydrofluoric acid (HF) etching. METHODS: A valid search query was developed with the help of PubMed's Medical Subject Headings (MeSH) vocabulary thesaurus and translated to three electronic databases: PubMed, Web of Science, and Scopus. The methodological quality of the studies was assessed according to an adapted version of the Methodological Index for Non-Randomized Studies (MINORS). RESULTS: Thirteen in vitro study reports published between 2008 and 2023 were selected for the qualitative and quantitative data synthesis. The implemented methodologies were diverse, comprising 19 different plasma treatment protocols with various device settings. Argon, helium, oxygen, or atmospheric air plasma may significantly increase the wettability and roughness of silicate ceramics by plasma cleaning, etching, and activation, but the treatment generally results in inferior bond strength values after cementation compared to those achieved with HF etching. The technically demanding protocol of plasma-enhanced chemical vapor deposition was employed more commonly, in which the surface deposition of hexamethyl disiloxane with subsequent oxygen plasma activation proved the most promising, yielding bond strengths comparable to those of the positive control. Lack of power analysis, missing adequate control, absence of examiner blinding, and non-performance of specimen aging were common methodological frailties that contributed most to the increase in bias risk (mean MINORS score 15.3 ± 1.1). SIGNIFICANCE: NTP can potentially improve the adhesive surface characteristics of dental silicate ceramics in laboratory conditions, but the conventional protocol of HF etching still performs better in terms of the resin-ceramic bond strength and longevity. More preclinical research is needed to determine the optimal NTP treatment settings and assess the aging of plasma-treated ceramic surfaces in atmospheric conditions.

Observation and Characterization of Vibrationally Active Surface Species Accessed with Nonthermal Nitrogen Plasmas.

Polycrystalline Ni, Pd, Cu, Ag, and Au foils exposed to nonthermal plasma (NTP)-activated N2 are found to exhibit a vibrational feature near 2200 cm-1 in polarization-modulation infrared reflection-absorption spectroscopy (PM-IRAS) observations that are not present in the same materials exposed to N2 under nonplasma conditions. The feature is similar to that reported elsewhere and is typically assigned to chemisorbed N2. We employ a combination of temperature-dependent experiments, sequential dosing, X-ray photoelectron spectroscopy, isotopic labeling, and density functional theory calculations to characterize the feature. Results are most consistent with a triatomic species, likely NCO, with the C and O likely originating from ppm-level impurities in the ultrahigh-purity (UHP) Ar and/or N2 gas cylinders. The work highlights the potential for nonthermal plasmas to access adsorbates inaccessible thermally as well as the potential contributions of ppm-level impurities to corrupt the interpretation of plasma catalytic chemistry.

Enhancing the Combustion of Magnesium Nanoparticles via Low-Temperature Plasma-Induced Hydrogenation.

The hydrogenation of metal nanoparticles provides a pathway toward tuning their combustion characteristics. Metal hydrides have been employed as solid-fuel additives for rocket propellants, pyrotechnics, and explosives. Gas generation during combustion is beneficial to prevent aggregation and sintering of particles, enabling a more complete fuel utilization. Here, we discuss a novel approach for the synthesis of magnesium hydride nanoparticles based on a two-step aerosol process. Mg particles are first nucleated and grown via thermal evaporation, followed immediately by in-flight exposure to a hydrogen-rich low-temperature plasma. During the second step, atomic hydrogen generated by the plasma rapidly diffuses into the Mg lattice, forming particles with a significant fraction of MgH2. We find that hydrogenated Mg nanoparticles have an ignition temperature that is reduced by ∼200 °C when combusted with potassium perchlorate as an oxidizer, compared to the non-hydrogenated Mg material. This is due to the release of hydrogen from the fuel, jumpstarting its combustion. In addition, characterization of the plasma processes suggests that a careful balance between the dissociation of molecular hydrogen and heating of the nanoparticles must be achieved to avoid hydrogen desorption during production and achieve a significant degree of hydrogenation.

Plasma-Activated Solutions Regulate Surface-Terminating Groups Enhancing Pseudocapacitive Ti3 C2 Tx Electrode Performance.

2D transition metal carbides and nitrides (MXenes) are actively pursued as pseudocapacitive materials for supercapacitors owing to their advantages in electronic conductivity and surface reactivity. Increasing the fraction of ─O terminal groups in Ti3 C2 Tx is a promising approach to improve the pseudocapacitive charge storage in H2 SO4 electrolytes, but it suffers from a lack of effective functionalization methods and stability of the groups in practical operation. Here a low-temperature and environment-friendly approach via the interaction of nonequilibrium plasmas with Ti3 C2 Tx dispersion is demonstrated to generate abundant and stable surface-terminating O groups. The impact of the discharge environment (Ar, O2 , and H2 ) on the structural characteristics and electrochemical performance of Ti3 C2 Tx nanosheets is studied. The Ti3 C2 Tx modified in Ar and H2 maintains their original morphology but a significantly lower F content. Consequently, an extraordinarily high content (78.5%) of surface-terminating O groups is revealed by the high-resolution X-ray photoelectron spectroscopy spectra for the Ti3 C2 Tx samples modified in H2 plasma-treated solutions. Additionally, the Ti3 C2 Tx treated using H2 plasmas exhibits the best capacitive performance of 418.3 F g-1 at 2 mV s-1 , which can maintain 95.88% capacity after 10 000 cycles. These results contribute to the development of advanced nanostructured pseudocapacitive electrode materials for renewable energy storage applications.