Novel nanoadjuvants balance immune activation with modest inflammation: implications for older adult vaccines.

BACKGROUND: Age-associated impairments of immune response and inflammaging likely contribute to poor vaccine efficacy. An appropriate balance between activation of immune memory and inflammatory response may be more effective in vaccines for older adults; attempts to overcome reduced efficacy have included the addition of adjuvants or increased antigenic dose. Next generation vaccine formulations may also use biomaterials to both deliver and adjuvant vaccine antigens. In the context of aging, it is important to determine the degree to which new biomaterials may enhance antigen-presenting cell (APC) functions without inducing potent inflammatory responses of APCs or other immune cell types (e.g., T cells). However, the effect of newer biomaterials on these cell types from young and older adults remains unknown. RESULTS: In this pilot study, cells from young and older adults were used to evaluate the effect of novel biomaterials such as polyanhydride nanoparticles (NP) and pentablock copolymer micelles (Mi) and cyclic dinucleotides (CDN; a STING agonist) on cytokine and chemokine secretion in comparison to standard immune activators such as lipopolysaccharide (LPS) and PMA/ionomycin. The NP treatment showed adjuvant-like activity with induction of inflammatory cytokines, growth factors, and select chemokines in peripheral blood mononuclear cells (PBMCs) of both young (n = 6) and older adults (n = 4), yet the degree of activation was generally less than LPS. Treatment with Mi or CDN resulted in minimal induction of cytokines and chemokine secretion with the exception of increased IFN-α and IL-12p70 by CDN. Age-related decreases were observed across multiple cytokines and chemokines, yet IFN-α, IL-12, and IL-7 production by NP or CDN stimulation was equal to or greater than in cells from younger adults. Consistent with these results in aged humans, a combination nanovaccine composed of NP, Mi, and CDN administered to aged mice resulted in a greater percentage of antigen-specific CD4+ T cells and greater effector memory cells in draining lymph nodes compared to an imiquimod-adjuvanted vaccine. CONCLUSIONS: Overall, our novel biomaterials demonstrated a modest induction of cytokine secretion with a minimal inflammatory profile. These findings suggest a unique role for biomaterial nanoadjuvants in the development of next generation vaccines for older adults.

Preparation and Characterization of Polyanhydride Terminated with Oleic Acid Extracted from Olive Mills Waste.

Valorizing the fatty content of agricultural waste in material synthesis is an interesting topic. This work focused on utilizing oleic acid from the solid waste of olive mills in Saudi Arabia to synthesize biodegradable polyanhydrides based on sebacic acid which terminated with different concentrations of fatty acid (10, 30, 50, and 70 wt%), then characterize the final polymer samples and study the effects of termination on polyanhydrides properties, such as molecular weight and degradation profile. The fatty content of the solid waste was extracted, purified, and analyzed prior to and after separating the saturated and unsaturated fractions by urea crystallization, then the microwave-assisted melt polycondensation technique was used in the synthesis of the final polymers. Molecular weights were determined by gel permeation chromatography (GPC), and the degradation profile of the prepared samples was examined by determining the weight loss percentage of the polymer mass and FT-IR scanning for the anhydride bond before and after sample degradation. Results showed a linear degradation profile for most samples with no significant change in the molecular weights due to termination.

Highly Branched Betulin Based Polyanhydrides for Self-Assembled Micellar Nanoparticles Formulation.

Polyanhydrides based on betulin are promising materials for use in controlled drug delivery systems. Due to the broad biological activity of betulin derivatives and lack of toxicity in vitro and in vivo, these polymers can be used both as polymeric prodrug and as carriers of other biologically active compounds. In this study, we develop a novel amphiphilic branched polyanhydrides synthesized by the two-step melt polycondensation of betulin disuccinate (DBB) and a tricarboxylic derivative of poly(ethylene glycol) (PEG_COOH). DBB and PEG_COOH were used as the hydrophobic and hydrophilic segments, respectively. The content of DBB in copolymers was from 10 to 95 wt%. Copolymers were assessed for their cytostatic activity against various cancer cell lines. Compared to linear DBB and PEG-based polyanhydrides, the branched polyanhydrides exhibited higher anticancer activity. The obtained polymers were able to self-assemble in water to form micelles with hydrodynamic diameters from 144.8 to 561.8 nm. and are stable over a concentration range from 12.5 µg/mL to 6.8 mg/mL. The formed micelles were found to be spherical in shape using a scanning electron microscope. It was found that the structure and composition of polyanhydrides affected the hydrodynamic diameter of the micelles. The branched betulin-based polyanhydrides have the potential to serve as biodegradable polymer prodrugs or carriers for other bioactive compounds.

Synthesis of Aliphatic Polyanhydrides with Controllable and Reproducible Molecular Weight.

Polyanhydrides have been synthesized for decades by melt-polycondensation of diacid monomers and 5 to >10 times mole excess acetic anhydride to diacid monomers to form polymers with a polydispersity ranging from 2.5 to 6 and low reproducibility. Hydrophobic segments in polyanhydrides are beneficial to hinder the characteristic hydrolytic cleavage of an anhydride bond that provides stable polyanhydrides at room temperature. The objective of this work is to synthesize aliphatic polyanhydrides with various hydrophobic segments, controllable and reproducible molecular weight, and low polydispersity that are essential for potential use as drug carriers. A series of polyanhydrides of suberic, azelaic, sebacic, and dodecanedioic acids with controlled molecular weight, reduced polydispersity, and standard deviation of molecular weights, have been synthesized. All synthesized polyanhydrides were thoroughly characterized by NMR, Fourier transform infrared spectroscopy, and gel permeation chromatography. Molecular weights of the synthesized polyanhydrides are highly controllable, depending on the degree of activation of the dicarboxylic acid monomers, i.e., the amount of acetic anhydride used during synthesis. Polyanhydrides have been synthesized in triplicate by melt-polycondensation, using various mole ratios of acetic anhydride to diacids. The standard deviation of the molecular weights of the polyanhydrides is minute when using 1 equivalent of acetic anhydride during the activation of dicarboxylic acids, whereas if excess acetic anhydride is used, the standard deviation is very high. The effect of safe and natural inorganic catalysts, Calcium oxide, Zinc oxide, and Calcium carbonate on polymerization is also studied. As-synthesized poly(sebacic acid) can offer convenience to use in controlled drug delivery applications. In vitro drug release study using Temozolamide (TMZ), a medication used to treat brain tumors such as glioblastoma and anaplastic astrocytoma, shows 14% TMZ release after the first hour and 70% release over one day from the poly(sebacic acid) wafers.

Biodegradable and Bioactive Carriers Based on Poly(betulin disuccinate-co-sebacic Acid) for Rifampicin Delivery.

This paper describes the preparation and characterization of polymer-drug systems based on polymeric microspheres obtained from poly(betulin disuccinate-co-sebacic acid). The active compound that was coupled to the betulin-based carriers was rifampicin (RIF), an ansamycin drug used in the treatment of tuberculosis. Poly(betulin disuccinate-co-sebacic acid) microspheres were prepared using a solvent evaporation technique from copolymers obtained by polycondensation of betulin disuccinate (DBB) and sebacic acid (SEB). The content of sebacic acid in the copolymers was 20, 40, 60 and 80 wt%, respectively. Small and large rifampicin-loaded microspheres were obtained for each of the copolymers. The initial amount of drug was 10, 30 or 50 wt%, based on the weight of the polymer. Particles obtained in this study were round in shape with diameter in the range of 2-21 µm and of orange to red colour originating from rifampicin. The RIF encapsulation efficacy varied from 7% to 33%. Drug loading varied from 2% to 13% and increased at a higher RIF ratio. The highest degree of drug loading was observed for large particles, in which the initial amount of drug (at the particle preparation stage) was 50 wt%. Microspheres prepared from betulin-based polyanhydrides may have significant applications in drug delivery systems. The concentration of loaded drug was enough to obtain bactericidal effects against reference S. Aureus ATCC 25923 bacteria.

Bioactive Betulin and PEG Based Polyanhydrides for Use in Drug Delivery Systems.

In the course of this study, a series of novel, biodegradable polyanhydrides based on betulin disuccinate and dicarboxylic derivatives of poly(ethylene glycol) were prepared by two-step polycondensation. These copolymers can be used as carriers in drug delivery systems, in the form of microspheres. Betulin and its derivatives exhibit a broad spectrum of biological activity, including cytotoxic activity, which makes them promising substances for use as therapeutic agents. Microspheres that were prepared from betulin based polyanhydrides show promising properties for use in application in drug delivery systems, including inhalation systems. The obtained copolymers release the active substance-betulin disuccinate-as a result of hydrolysis under physiological conditions. The use of a poly(ethylene glycol) derivative as a co-monomer increases the solubility and bioavailability of the obtained compounds. Microspheres with diameters in the range of 0.5-25 µm were prepared by emulsion solvent evaporation method and their physicochemical and aerodynamic properties were analyzed. The morphological characteristics of the microspheres depended on the presence of poly(ethylene glycol) (PEG) segment within the structure of polyanhydrides. The porosity of the particles depended on the amount and molecular weight of the PEG used and also on the speed of homogenization. The most porous particles were obtained from polyanhydrides containing 20% wt. of PEG 600 by using a homogenization speed of 18,000 rpm.

Systematic Studies on Surface Erosion of Photocrosslinked Polyanhydride Tablets and Data Correlation with Release Kinetic Models.

Photocrosslinkable polyanhydrides that undergo surface erosion are suitable materials for controlled-release drug delivery systems. Investigating the impact of different parameters on their erosion behavior is essential before use in drug delivery systems. Although their synthesis is well-established, parameters that may substantially affect the erosion of thiol-ene polyanhydrides including temperature and pH of the media, the geometry of the polymers, and the media shaking rate (the convective force for the polymer erosion), have not yet been studied. This study explores the effects of different environmental and geometric parameters on mass loss (erosion) profiles of polyanhydrides synthesized by thiol-ene photopolymerization. A comparative study on several release kinetic models fitting is also described for a better understanding of the polymer erosion behavior. The results demonstrated that although the temperature was the only parameter that affected the induction period substantially, the mass-loss rate was influenced by the polymer composition, tablet geometry, temperature, pH, and mass transfer (shaking) rate. With regard to geometrical parameters, polymers with the same surface area to volume ratios showed similar mass loss trends despite their various volumes and surface areas. The mass loss of polyanhydride tablets with more complicated geometries than a simple slab was shown to be non-linear, and the kinetic model study indicated the dominant surface erosion mechanism. The results of this study allow for designing and manufacturing efficient delivery systems with a high-predictable drug release required in precision medicine using surface-erodible polyanhydrides.

Pentaerythritol-based lipid A bolsters the antitumor efficacy of a polyanhydride particle-based cancer vaccine.

The primary objective of this study was to enhance the antitumor efficacy of a model cancer vaccine through co-delivery of pentaerythritol lipid A (PELA), an immunological adjuvant, and a model tumor antigen, ovalbumin (OVA), separately loaded into polyanhydride particles (PA). In vitro experiments showed that encapsulation of PELA into PA (PA-PELA) significantly enhanced its stimulatory capacity on dendritic cells as evidenced by increased levels of the cell surface costimulatory molecules, CD80/CD86. In vivo experiments showed that PA-PELA, in combination with OVA-loaded PA (PA-OVA), significantly expanded the OVA-specific CD8+ T lymphocyte population compared to PA-OVA alone. Furthermore, OVA-specific serum antibody titers of mice vaccinated with PA-OVA/PA-PELA displayed a significantly stronger shift toward a Th1-biased immune response compared to PA-OVA alone, as evidenced by the substantially higher IgG2C:IgG1 ratios achieved by the former. Analysis of E.G7-OVA tumor growth curves showed that mice vaccinated with PA-OVA/PA-PELA had the slowest average tumor growth rate.

Data Analytics Approach for Rational Design of Nanomedicines with Programmable Drug Release.

Drug delivery vehicles can improve the functional efficacy of existing antimicrobial therapies by improving biodistribution and targeting. A critical property of such nanomedicine formulations is their ability to control the release kinetics of their payloads. The combination of (and interactions among) polymer, drug, and nanoparticle properties gives rise to nonlinear behavioral relationships and large data space. These factors complicate both first-principles modeling and screening of nanomedicine formulations. Predictive analytics may offer a more efficient approach toward the rational design of nanomedicines by identifying key descriptors and correlating them to nanoparticle release behavior. In this work, antibiotic release kinetics data were generated from polyanhydride nanoparticle formulations with varying copolymer compositions, encapsulated drug type, and drug loading. Four antibiotics, doxycycline, rifampicin, chloramphenicol, and pyrazinamide, were used. Linear manifold learning methods were used to relate drug release properties with polymer, drug, and nanoparticle properties, and key descriptors were identified that are highly correlated with release properties. However, these linear methods could not predict release behavior. Nonlinear multivariate modeling based on graph theory was then used to deconvolute the governing relationships between these properties, and predictive models were generated to rapidly screen lead nanomedicine formulations with desirable release properties with minimal nanoparticle characterization. Release kinetics predictions of two drugs containing atoms not included in the model showed good agreement with experimental results, validating the model and indicating its potential to virtually explore new polymer and drug pairs not included in the training data set. The models were shown to be robust after the inclusion of these new formulations, in that the new inclusions did not significantly change model regression. This approach provides the first step toward the development of a framework that can be used to rationally design nanomedicine formulations by selecting the appropriate carrier for a drug payload to program desirable release kinetics.

Biodegradable polyanhydride-based nanomedicines for blood to brain drug delivery.

An urgent need to deliver therapeutics across the blood-brain barrier (BBB) underlies a paucity of effective therapies currently available for treatment of degenerative, infectious, traumatic, chemical, and metabolic disorders of the nervous system. With an eye toward achieving this goal, an in vitro BBB model was employed to simulate biodegradable polyanhydride nanoparticle-based drug delivery to the brain. Using a combination of confocal microscopy, flow cytometry, and high performance liquid chromatography, we examined the potential of polyanhydride nanoparticles containing the anti-oxidant, mito-apocynin, to be internalized and then transferred from monocytes to human brain microvascular endothelial cells. The efficacy of this nanoparticle-based delivery platform was demonstrated by neuronal protection against oxidative stress. Taken together, this polyanhydride nanoparticle-based delivery system holds promise for enhancing neuroprotection by facilitating drug transport across the BBB. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2881-2890, 2018.

The effect of polyanhydride chemistry in particle-based cancer vaccines on the magnitude of the anti-tumor immune response.

The goal of this research was to study the effect of polyanhydride chemistry on the immune response induced by a prophylactic cancer vaccine based on biodegradable polyanhydride particles. To achieve this goal, different compositions of polyanhydride copolymers based on 1,8-bis-(p-carboxyphenoxy)-3,6-dioxaoctane (CPTEG), 1,6-bis-(p-carboxyphenoxy)-hexane (CPH), and sebacic anhydride (SA) were synthesized by melt polycondensation, and polyanhydride copolymer particles encapsulating a model antigen, ovalbumin (OVA), were then synthesized using a double emulsion solvent evaporation technique. The ability of three different compositions of polyanhydride copolymers (50:50 CPTEG:CPH, 20:80 CPTEG:CPH, and 20:80 CPH:SA) encapsulating OVA to elicit immune responses was investigated. In addition, the impact of unmethylated oligodeoxynucleotides containing deoxycytidyl-deoxyguanosine dinucleotides (CpG ODN), an immunological adjuvant, on the immune response was also studied. The immune response to cancer vaccines was measured after treatment of C57BL/6J mice with two subcutaneous injections, seven days apart, of 50µg OVA encapsulated in particles composed of different polyanhydride copolymers with or without 25µg CpG ODN. In vivo studies showed that 20:80 CPTEG:CPH particles encapsulating OVA significantly stimulated the highest level of CD8+ T lymphocytes, generated the highest serum titers of OVA-specific IgG antibodies, and provided longer protection against tumor challenge with an OVA-expressing thymoma cell line in comparison to formulations made from other polyanhydride copolymers. The results also revealed that vaccination with CpG ODN along with polyanhydride particles encapsulating OVA did not enhance the immunogenicity of OVA. These results accentuate the crucial role of the copolymer composition of polyanhydrides in stimulating the immune response and provide important insights on rationally designing efficacious cancer vaccines. STATEMENT OF SIGNIFICANCE: Compared to soluble cancer vaccine formulations, tumor antigens encapsulated in biodegradable polymeric particles have been shown to sustain antigen release and provide long-term protection against tumor challenge by improving the immune response towards the antigen. Treatment of mice with cancer vaccines based on different polyanhydride copolymers encapsulating OVA resulted in stimulation of tumor-specific immune responses with different magnitudes. This clearly indicates that polyanhydride chemistry plays a substantial role in stimulating the immune response. Vaccination with 20:80 CPTEG:CPH/OVA, the most hydrophobic formulation, stimulated the strongest cellular and humoral immune responses and provided the longest survival outcome without adding any other adjuvant. The most important finding in this study is that the copolymer composition of polyanhydride particle-based vaccines can have a direct effect on the magnitude of the antitumor immune response and should be selected carefully in order to achieve optimal cancer vaccine efficacy.

Quantitative and qualitative toxicological evaluation of thiol-ene "click" chemistry-based polyanhydrides and their degradation products.

Quantitative and qualitative toxicological analyses of crosslinked, surface-eroding polyanhydrides (PAHs) made from thiol-ene "click" polymerizations are reported. The cytotoxicity of these PAHs was investigated against three skin-based cell types; melanoma (A-375), human dermal fibroblast adult (HDFa), and 3T3-J2 (mouse fibroblast) cells, thus providing insight into the potential for these PAHs to be used in dermal drug delivery applications. Apoptosis was evaluated quantitatively and qualitatively using MTT assay and fluorescence microscopic imaging as indication of cytotoxicity. Upon exposure of A-375 and HDFa cells to high concentrations (4000 mg/L) of crosslinked PAH, the respective morphologies remained relatively unchanged compared with nonexposed cells. The 3T3-J2 cell type was more sensitive towards the PAH, exhibiting minimal deformation of cell morphology at 4000 mg/L. The MTT assay and fluorescence imaging revealed that this PAH and its degradation products are highly cytocompatible at high concentrations and cytotoxicity observed is dosage/time dependent. Further, the PAH did not induce inhibition of tested cells' proliferation at high polymer concentration up to 2000 mg/L. The IC50 (concentration of the crosslinked PAH required to inhibit 50% cell viability) for HDFa and A-375 cells was determined to be 4300 ± 70 and 8500 ± 50 mg/L, respectively. The high cytocompatibility of this type of crosslinked PAH, in addition to their degradation products, towards these skin cells (standard and cancer cell types) suggests that the polymer may be viable for dermal-based drug delivery to normal and cancerous diseased tissues. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1936-1945, 2016.

Cellular Internalization Mechanisms of Polyanhydride Particles: Implications for Rational Design of Drug Delivery Vehicles.

Polyanhydride nanoparticles have emerged as a versatile delivery platform, due to their ability to encapsulate diverse drugs, immunogens, antibodies, and proteins. However, mechanistic studies on the effects of particle chemistry interactions with immune cells have yet to be described. Understanding the mechanism by which these particles are internalized by immune cells will enable rational selection of delivery vehicles for specific applications. In the present study, the internalization, mechanism(s) of uptake by monocytes, and intracellular fate of polyanhydride nanoparticles were evaluated using copolymers based on 1,6-bis(p-carboxyphenoxy)hexane (CPH), sebacic acid (SA), and 1,8-bis(p-carboxyphenoxy)3,6-dioxaoctane (CPTEG). The results showed that 20:80 CPH:SA and 20:80 CPTEG:CPH nanoparticles were internalized to a greater extent by monocytes as compared to the 50:50 CPH:SA and 50:50 CPTEH:CPH nanoparticles. Further, cytochalasin-D treatment of cells inhibited uptake of all the particles, regardless of chemistry, indicating that actinmediated uptake is the primary mechanism of cellular entry for these particles. The insights gained from these studies were used to identify lead nanoparticle formulations to enhance treatment of intracellular bacterial infections. The use of doxycycline-loaded nanoparticles exhibited enhanced therapeutic efficacy compared to soluble drug in treating monocyte monolayers infected with the virulent intracellular pathogen Brucella abortus. Altogether, these studies demonstrate how rational design and selection of nanoscale delivery platforms can be used for a wide spectrum of biomedical applications.

Synthesis and characterization of copolyanhydrides of carbohydrate-based galactaric acid and adipic acid.

A series of copolyanhydrides, consisting of 2,3,4,5-tetra-O-acetylgalactaric acid (AGA) and adipic acid (AA) as monomer units, was polymerized. Synthesis of AGA monomer consisted of two steps. First, O-acetylation of galactaric acid secondary hydroxyl groups was performed using acetic anhydride as a reagent. Acetic anhydride was then further used as a reagent in the synthesis of diacetyl mixed anhydride of AGA. Polymerizations were conducted as bulk condensation polymerization at 150 °C. Thermal properties of the copolymers varied depending on monomer composition. Increase in the AGA content had a clear increasing effect on the Tg. A similar increasing effect was observed in Tm. The degree of crystallinity decreased as AGA content increased. There was a slightly lowering tendency in the molecular weights of the obtained polymers when the AGA content in the polymerization mixtures increased. The described synthesis route shows that bio-based aldaric acid monomers are potential candidates for the adjustment of thermal properties of polyanhydrides.

Carbohydrate-functionalized nanovaccines preserve HIV-1 antigen stability and activate antigen presenting cells.

The functionalization of polymeric nanoparticles with ligands that target specific receptors on immune cells offers the opportunity to tailor adjuvant properties by conferring pathogen mimicking attributes to the particles. Polyanhydride nanoparticles are promising vaccine adjuvants with desirable characteristics such as immunomodulation, sustained antigen release, activation of antigen presenting cells (APCs), and stabilization of protein antigens. These capabilities can be exploited to design nanovaccines against viral pathogens, such as HIV-1, due to the important role of dendritic cells (DCs) and macrophages in viral spread. In this work, an optimized process was developed for carbohydrate functionalization of HIV-1 antigen-loaded polyanhydride nanoparticles. The carbohydrate-functionalized nanoparticles preserved antigenic properties upon release and also enabled sustained antigen release kinetics. Particle internalization was observed to be chemistry-dependent with positively charged nanoparticles being taken up more efficiently by DCs. Up-regulation of the activation makers CD40 and CD206 was demonstrated with carboxymethyl-α-d-mannopyranosyl-(1,2)-d-mannopyranoside functionalized nanoparticles. The secretion of the cytokines IL-6 and TNF-α was shown to be chemistry-dependent upon stimulation with carbohydrate-functionalized nanoparticles. These results offer important new insights upon the interactions between carbohydrate-functionalized nanoparticles and APCs and provide foundational information for the rational design of targeted nanovaccines against HIV-1.

"Click" synthesis of fatty acid derivatives as fast-degrading polyanhydride precursors.

Fast-degrading linear and branched polyanhydrides are obtained by melt-condensation of novel di- and tri-carboxylic acid monomers based on oleic and undecylenic acid synthesized using photoinitiated thiol-ene click chemistry. (1)H NMR spectroscopy, size exclusion chromatography, differential scanning calorimetry, thermogravimetric analysis, and FT-IR spectroscopy have been used to fully characterize these polymers. The hydrolytic degradation of these polymers was studied by means of weight loss, anhydride bond loss, and changes in molecular weight, showing fast degrading properties. Drug release studies from the synthesized polyanhydrides have also been conducted, using rhodamine B as a hydrophobic model drug, to evaluate the potential of these polymers in biomedical applications.

Lipocalin-2-loaded amphiphilic polyanhydride microparticles accelerate cell migration.

This work demonstrates that amphiphilic polyanhydride microparticles based on co-polymers of 1,6-bis(p-carboxyphenoxy)hexane (CPH) and 1,6-bis(p-carboxyphenoxy)-3,6-dioxaoctane (CPTEG) provide stabilizing environments for proteins. A cryogenic atomization method was used to fabricate protein-loaded polyanhydride microparticles. These microparticles were tested for their ability to provide controlled delivery of lipocalin 2 (Lcn2) and to maintain its structure and function. Lcn2 is an acute-phase protein suspected to play a role in cell migration and tissue repair. The in vitro release kinetics of Lcn2 from the microparticles were a function of the chemistry of the polymer carrier. The biological activity of Lcn2 released from polyanhydride microparticles was investigated by its ability to stimulate migration of human colon epithelial cells (HCT116). Lcn2 released from 50:50 and 20:80 CPTEG/CPH microparticles maintained its biological activity as demonstrated by the increased rate of cell migration. In addition, the Lcn2-loaded 50:50 and 20:80 CPTEG/CPH microparticles promoted cell migration over that of the Lcn2 administered alone. This was interpreted as the ability of the amphiphilic microparticles to stabilize the encapsulated protein and release it in a controlled manner over a period of time. This work demonstrates the potential for therapeutic use of amphiphilic polyanhydride microparticles as protein/drug carriers.

Hidrogéis de PVP e blendas de PVP/polianidridos como potenciais curativos para feridas crônicas / PVP hydrogels and PVP/Polyanhydride blends as potential materials for chronic wounds dressings

Hidrogéis compreendem uma importante classe de materiais poliméricos adequados à aplicação como curativos de feridas e queimaduras. A estrutura tridimensional hidrofílica dos hidrogéis permite que estes mantenham a umidade ideal no leito das feridas, absorvam o exsudato e não causem danos ao novo tecido durante as trocas dos curativos. No caso dos hidrogéis, essas trocas podem ser menos frequentes. Além disso, curativos que auxiliem na remoção de tecidos necrosados e ainda sejam capazes de oferecer tratamentos extras que acelerem o processo de cicatrização são desejáveis. Este trabalho apresenta a produção de materiais à base de hidrogel capazes de auxiliar neste processo de diferentes maneiras. Primeiramente, são apresentados hidrogéis formados a partir de nanofibras de poli(N-vinil-2-pirrolidona) (PVP) produzidas por eletrofiação, seguido da reticulação através da utilização de radiação UV-C ou reação de Fenton. A utilização da eletrofiação como técnica auxiliar na formação dos hidrogéis permitiu o controle da porosidade através da formação de fibras de diferentes diâmetros. A evidência de tal propriedade foi constatada através da produção de materiais que apresentam diferentes perfis de liberação da proteína modelo albumina de soro bovino (BSA). O hidrogel de PVP nanoestruturado foi capaz de liberar e manter a atividade da colagenase, uma importante enzima aplicada no tratamento de feridas via desbridamento enzimático, durante as 48 horas em que foi avaliado. Além disso, hidrogéis bactericidas nanoestruturados foram produzidos a partir de nanocompósitos de PVP e nanopartículas de prata (AgNP) produzidos por eletrofiação. Esses hidrogéis apresentaram propriedades térmicas semelhantes aos hidrogéis sem AgNP, diminuindo, contudo, a sua capacidade de intumescimento. Esses hidrogéis mostraram-se ativos contra bactérias gram-positivas e gram-negativas a partir de 100 ppm de AgNPs. Adicionalmente, foi estudada a formação de um hidrogel modelo composto PVP/AgNP/Imidazol, almejando-se a produção de um material bactericida-fungicida a base de hidrogel. Este hidrogel apresentou atividade conta três espécies de Candida a partir de 500 ppm de imidazol no material. Embora exista a formação de um complexo estável entre AgNP e Imidazol, cálculos teóricos e a constatação da atividade fungicida corroboram com o fato de que derivados imidazólicos podem ser liberados a partir deste hidrogel híbrido. A produção de hidrogéis físicos compostos por blendas de PVP/Polianidridos sintetizados a partir de derivados de hidroxicinamatos e ácido salicílico, capazes de liberar moléculas de interesse biológico quando parcialmente degradados hidroliticamente, também é descrita neste trabalho. Os resultados indicam que interações hidrofóbicas entre a PVP e os polianidridos sintetizados podem ser responsáveis pela formação dos hidrogéis físicos e pela miscibilidade das blendas produzidas. Os hidrogéis físicos de PVP/Polianidridos foram obtidos na forma de filmes por evaporação do solvente. Micro- e nanofibras também foram obtidas por eletrofiação. Desta maneira, o presente trabalho contribui com o desenvolvimento de uma geração de curativos multifuncionais aplicados no tratamento de feridas crônicas e queimaduras

Hydrogels comprise an important class of polymeric materials that finds application as wound and burn dressings. The hydrophilic three-dimensional structure of hydrogels helps to provide the ideal humidity at the wound bed, to remove exsudates and to prevent damages to the new tissue during dressing substitution. Furthermore, these wound dressings are able to remove necrotic tissues and, therefore, capable to offer extra treatments that would benefit the healing processes. This work describes the production of hydrogel based materials that are able to act in wound healing by different ways. First, it is presented hydrogels composed of poly(N-vinyl-2-pyrrolidone) (PVP) nanofibers produced by electrospinning, followed by its crosslinking using UV-C radiation or Fenton reaction. The use of electrospinning in the hydrogel formation allowed porosity control by obtaining fibers of different diameters. This was evidenced by achieving materials that present different release profiles of the model protein bovine serum albumin (BSA). The nanostructured PVP hydrogel was capable of releasing and maintaining collagenase activity during 48 hour of evaluation. This is an important enzyme that find application in wound healing based on enzymatic debridement. Moreover, nanostructured bactericidal hydrogels were produced from PVP and silver nanoparticles (AgNP) composite through electrospinning, resulting in hydrogels with thermal properties similar to those hydrogels without AgNP, decreasing its swelling ability. These hydrogels were active against gram-positives and gram-negatives bacteria starting from 100 ppm of AgNP. In addition, the production of a model hydrogel composed by PVP/AgNP/Imidazole was investigated, aiming at a bactericidal-fungicidal hydrogel based material. This hydrogel was active against three Candida having 500 ppm of imidazole into the structure. In spite of the formation of a stable complex between AgNP and imidazole, theoretic calculations and the observed fungicidal activity corroborate with the fact that imidazoles derivatives can be released from this hybrid hydrogel. Physical hydrogels composed of PVP/Polyanhydrides blends were synthesized from hydroxycinammates derivatives and salicylic acid. These materials which were capable of releasing molecules with biological potential upon hydrolysis, are also described in this work. The results indicate that hydrophobic interactions between PVP and the synthesized polyanhydrides could be responsible for the hydrogel formation and blend miscibility as well. PVP/Polyanhydride physical hydrogels were obtained from cast films. Micro- and nanofibers were also obtained by electrospinning. Thus, the present work contributes with the development of the new generation of smart dressings for wound and burn healing