Mapping and spectroscopy of telecom quantum emitters with confocal laser scanning microscopy.

Efficiently coupling single-photon emitters in the telecommunication C-band that are not deterministically positioned to photonic structures requires both spatial and spectral mapping. This study introduces the photoluminescence mapping of telecom C-band self-assembled quantum dots (QDs) by confocal laser scanning microscopy, a technique previously unexplored in this wavelength range which fulfills these two requirements. We consider the effects of distortions inherent to any imaging system but largely disregarded in prior works to derive accurate coordinates from photoluminescence maps. We obtain a position uncertainty below 11 nm for 10% of the QDs when assuming no distortions, highlighting the potential of the scanning approach. After distortion correction, we found that the previously determined positions are on average shifted by 428 nm from the corrected positions, demonstrating the necessity of this correction for accurate positioning. Then, through error propagation, the position uncertainty for 10% of the QDs increases to 110 nm.

Novel Carbon Quantum Dots Precisely Trigger Ferroptosis in Cancer Cells through Antioxidant Inhibition Synergistic Nanocatalytic Activity.

High levels of glutathione (GSH) are an important characteristic of malignant tumors and a significant cause of ineffective treatment and multidrug resistance. Although reactive oxygen species (ROS) therapy has been shown to induce tumor cell death, the strong clearance effect of GSH on ROS significantly reduces its therapeutic efficacy. Therefore, there is a need to develop new strategies for targeting GSH. In this study, novel carbon quantum dots derived from gentamycin (GM-CQDs) were designed and synthesized. On the basis of the results obtained, GM-CQDs contain sp2 and sp3 carbon atoms as well as nitrogen oxygen groups, which decrease the intracellular levels of GSH by downregulating SLC7A11, thereby disrupting redox balance, mediating lipid peroxidation, and inducing ferroptosis. Transcriptome analysis demonstrated that GM-CQDs downregulated the expression of molecules related to GSH metabolism while significantly increasing the expression of molecules related to ferroptosis. The in vivo results showed that the GM-CQDs exhibited excellent antitumor activity and immune activation ability. Furthermore, because of their ideal biological safety, GM-CQDs are highly promising for application as drugs targeting GSH in the treatment of malignant tumors.

Short-Wave Infrared Light-Emitting Diodes Using Colloidal CuInS2 Quantum Dots with ZnI2 Dual-Passivation.

Short-wave infrared (SWIR) light-emitting diodes (LEDs) have emerged as promising technologies for diverse applications such as optical communication, biomedical imaging, surveillance, and machine vision. Colloidal quantum dots (QDs) are particularly attractive for SWIR LEDs due to their solution processability, compatibility with flexible substrates, and tunable absorption and luminescence. However, the presence of toxic elements or precious metals in most SWIR-emitting QDs poses health, environmental, and cost challenges. In this context, CuInS2 (CIS) QDs are known for low toxicity, cost-effective fabrication, and SWIR-light emitting capability. However, CIS QDs have not yet been directly utilized to fabricate SWIR LEDs to date, which is due to low particle stability, inefficient charge carrier recombination, and significantly blue-shifted luminescence after integrating into LED devices. To address challenges, we propose a dual-passivation strategy using ZnI2 as a chemical additive to enhance both the optical property of plain CIS QDs and charge carrier recombination upon LED device implementation. The resulting CIS-QD-based LEDs exhibit a stable SWIR electroluminescence (EL) peak (over 1000 nm) with a high EL radiance and a record external quantum efficiency in the SWIR region. Our study represents a significant step forward in SWIR-QLED technology, offering a pathway for the development of high-performance, low-cost, and nontoxic SWIR light sources.

One-Pot Synthesis of Color-Tunable Narrow-Bandwidth Ag-In-Ga-Zn-S Semiconductor Nanocrystals for Quantum-Dot Light-Emitting Diodes.

I-III-VI type semiconductor nanocrystals (NCs) have attracted considerable attention due to their environmental friendly nature and large-scale tunable emission. Herein, we report the successful synthesis of full-spectrum (470 to 614 nm) Ag-In-Ga-Zn-S (AIGZS) NCs by precisely regulating the In/Ga ratios using a facile one-pot method. Intriguingly, the photoluminescence (PL) peak width exhibits a continuous narrowing trend with extended reaction time, ultimately reaching a full width at half-maximum (fwhm) of 34 nm for green AIGZS NCs. Furthermore, the exciton relaxation dynamics of AIGZS NCs were systematically investigated using time-resolved photoluminescence and femtosecond transient absorption spectroscopy. Remarkably, we successfully fabricated blue, green, and red quantum-dot light-emitting diodes (QLEDs), forecasting the potential of AIGZS NCs with high color purity for applications in full-spectrum QLEDs.

GaAs Cone-Shell Quantum Dots in a Lateral Electric Field: Exciton Stark-Shift, Lifetime, and Fine-Structure Splitting.

Strain-free GaAs cone-shell quantum dots have a unique shape, which allows a wide tunability of the charge-carrier probability densities by external electric and magnetic fields. Here, the influence of a lateral electric field on the optical emission is studied experimentally using simulations. The simulations predict that the electron and hole form a lateral dipole when subjected to a lateral electric field. To evaluate this prediction experimentally, we integrate the dots in a lateral gate geometry and measure the Stark-shift of the exciton energy, the exciton intensity, the radiative lifetime, and the fine-structure splitting (FSS) using single-dot photoluminescence spectroscopy. The respective gate voltage dependencies show nontrivial trends with three pronounced regimes. We assume that the respective dominant processes are charge-carrier deformation at a low gate voltage U, a vertical charge-carrier shift at medium U, and a lateral charge-carrier polarization at high U. The lateral polarization forms a dipole, which can either enhance or compensate the intrinsic FSS induced by the QD shape anisotropy, dependent on the in-plane orientation of the electric field. Furthermore, the data show that the biexciton peak can be suppressed by a lateral gate voltage, and we assume the presence of an additional vertical electric field induced by surface charges.

Quantum Transport through a Quantum Dot Coupled to Majorana Nanowire and Two Ferromagnets with Noncollinear Magnetizations.

We study the electron tunneling (ET) and local Andreev reflection (AR) processes in a quantum dot (QD) coupled to the left and right ferromagnetic leads with noncollinear ferromagnetisms. In particular, we consider that the QD is also side-coupled to a nanowire hosting Majorana bound states (MBSs) at its ends. Our results show that when one mode of the MBSs is coupled simultaneously to both spin-up and spin-down electrons on the QD, the height of the central peak is different from that if the MBS is coupled to only one spin component electrons. The ET and AR conductances, which are mediated by the dot-MBS hybridization, strongly depend on the angle between the left and right magnetic moments in the leads. Interaction between the QD and the MBSs will result in sign change of the angle-dependent tunnel magnetoresistance. This is very different from the case when the QD is coupled to regular fermonic mode, and can be used for detecting the existence of MBSs, a current challenge in condensed matter physics under extensive investigations.

Quantum-Dot Light-Emitting Fiber Toward All-In-One Clothing-Type Health Monitoring.

In the Fourth Industrial Revolution, as the connection between objects and people becomes increasingly important, interest in wearable optoelectronic device-based medical diagnosis is on the rise. Pulse oximetry sensors based on a fiber platform, which is the smallest unit of clothing, could be considered an attractive candidate for this application. In this study, red and green quantum-dot light-emitting fibers (QDLEFs) based on a 250 µm-diameter 1-dimensional fiber were successfully implemented, achieving high current efficiencies of approximately 22.46 mW/sr/A and 23.6 mW/sr/A and narrow full-width at half-maximum (FWHM) of about 33 nm, respectively. In addition, its omnidirectional flexibility was confirmed through a vertical and lateral bending test with 0.92% strain. By employing a transparent and flexible elastomer, a wearable pulse oximeter incorporating QDLEFs was successfully demonstrated for oxygen saturation level (SpO2) monitoring on finger and wrist. It was demonstrated to be washable, and could be operated for up to about 18 h. Due to the elastomer and bottom emission, it exhibited excellent wear resistance characteristics in a 50 cycle reciprocating test conducted at about 2180.43 kPa with 220-grit abrasive paper sheet. A theoretical investigation based on modified photon diffusion analysis (MPDA) modeling also determined that using narrow FWHM light sources, such as QDLEFs, improves the resolution and accuracy of SpO2 monitoring. Accordingly, the proposed QDLEF showed distinguished potential as an all-in-one clothing type pulse oximetry.

Revealing oxygen effect on efficiency and stability of quantum dot photovoltaics.

Colloidal quantum dot solar cells (CQDSCs) have received great attention in the development of scalable and stable photovoltaic devices. Despite the high power-conversion-efficiency (PCE) reported, stability investigations are still limited and the exact degradation mechanisms of CQDSCs remain unclear under different atmosphere conditions. In this study, the atmospheric influence on the ZnO electron transport layer material (ETL), halide-passivated lead sulfide CQDs (PbS-PbI2) photoactive layer material and 1,2-ethanedithiol-PbS CQDs (PbS-EDT) hole transport material on device stability in PbS CQDSCs is investigated. It was found that O2 had negligible influence on PbS-PbI2, but it did induce the increase in work function of ZnO ETL and PbS-EDT layers. Notably, the increase of the ZnO work function (WFZnO) induces the formation of interface barrier between ZnO and PbS-PbI2, leading to a deterioration in device efficiency. By further replacing ZnO ETL with SnO2, a multi-interface collaborative CQDSC was constructed to realize the PCE with high stability. This study identifies the efficiency evolution that is inherent in CQDSCs under different atmospheric conditions.

Impact of Alternating-Current Operation on All-Inorganic Quantum Dot Light-Emitting Diodes.

In colloidal quantum dot light-emitting diodes (QD-LEDs), replacing organic hole transport layers (HTLs) with their inorganic counterparts is expected to yield distinct advantages due to their inherent material robustness. However, despite the promising characteristics of all-inorganic QD-LEDs, some challenges persist in achieving stable operation; for example, the electron overflow toward the inorganic HTL and charge accumulation within working devices return a temporal inconsistency in device characteristics. To address these challenges, we propose an operational approach that employs an alternating-current (AC) in all-inorganic QD-LEDs. We carry out comprehensive studies on the optoelectrical characteristics of all-inorganic QD-LEDs under direct-current (DC) or AC operation and demonstrate that AC operation can facilitate efficient charge carrier recombination within the QD emissive layer, leading to improved device efficiency and temporally invariant optoelectronic characteristics. Leveraging the intrinsic material robustness of inorganic charge transport layers (CTLs), our current study suggests a promising pathway toward enhancing the performance and stability of QD-LEDs, particularly for futuristic display applications.

Hybrid Thin Film Encapsulation for Improving the Stability of PbS Quantum Dot Solar Cells.

The instability to moisture, heat, and ultraviolet (UV) light is the main problem in the application of quantum dot solar cells (QDSCs). Thin film encapsulation can effectively improve their operational stability. However, it is difficult to achieve multiple barrier effects with single layer of encapsulated film. Here, a hybrid thin-film encapsulation strategy is reported to encapsulate lead sulfide QDSCs, which can isolate moisture and partial thermal, and prevent the penetration of UV light, thus retarding the surface oxidation process of the quantum dots. After 60 h, the encapsulated device retains a normalized power conversion efficiency of 83.8% and 80.6% at 85% humidity and 75 °C, respectively, which is three and six times of the value obtained in unencapsulated devices. At continuous UV illumination, encapsulated device exhibits five times higher stability than the reference. This strategy provides the way for the overall improvement of the operating stability of lead sulfide QDSCs in harsh environments of high humidity, high temperature, and UV light.

Ligand Equilibrium Influences Photoluminescence Blinking in CsPbBr3: A Change Point Analysis of Widefield Imaging Data.

Photoluminescence intermittency remains one of the biggest challenges in realizing perovskite quantum dots (QDs) as scalable single photon emitters. We compare CsPbBr3 QDs capped with different ligands, lecithin, and a combination of oleic acid and oleylamine, to elucidate the role of surface chemistry on photoluminescence intermittency. We employ widefield photoluminescence microscopy to sample the blinking behavior of hundreds of QDs. Using change point analysis, we achieve the robust classification of blinking trajectories, and we analyze representative distributions from large numbers of QDs (Nlecithin = 1308, Noleic acid/oleylamine = 1317). We find that lecithin suppresses blinking in CsPbBr3 QDs compared with oleic acid/oleylamine. Under common experimental conditions, lecithin-capped QDs are 7.5 times more likely to be nonblinking and spend 2.5 times longer in their most emissive state, despite both QDs having nearly identical solution photoluminescence quantum yields. We measure photoluminescence as a function of dilution and show that the differences between lecithin and oleic acid/oleylamine capping emerge at low concentrations during preparation for single particle experiments. From experiment and first-principles calculations, we attribute the differences in lecithin and oleic acid/oleylamine performance to differences in their ligand binding equilibria. Consistent with our experimental data, density functional theory calculations suggest a stronger binding affinity of lecithin to the QD surface compared to oleic acid/oleylamine, implying a reduced likelihood of ligand desorption during dilution. These results suggest that using more tightly binding ligands is a necessity for surface passivation and, consequently, blinking reduction in perovskite QDs used for single particle and quantum light experiments.

A dicoumarol-graphene oxide quantum dot polymer inhibits porcine reproductive and respiratory syndrome virus through the JAK-STAT signaling pathway.

Introduction: Porcine reproductive and respiratory syndrome virus (PRRSV) causes substantial economic losses in the global swine industry. The current vaccine options offer limited protection against PRRSV transmission, and there are no effective commercial antivirals available. Therefore, there is an urgent need to develop new antiviral strategies that slow global PRRSV transmission. Methods: In this study, we synthesized a dicoumarol-graphene oxide quantum dot (DIC-GQD) polymer with excellent biocompatibility. This polymer was synthesized via an electrostatic adsorption method using the natural drug DIC and GQDs as raw materials. Results: Our findings demonstrated that DIC exhibits high anti-PRRSV activity by inhibiting the PRRSV replication stage. The transcriptome sequencing analysis revealed that DIC treatment stimulates genes associated with the Janus kinase/signal transducer and activator of transcription (JAK/STAT) signalling pathway. In porcine alveolar macrophages (PAMs), DIC-GQDs induce TYK2, JAK1, STAT1, and STAT2 phosphorylation, leading to the upregulation of JAK1, STAT1, STAT2, interferon-ß (IFN-ß) and interferon-stimulated genes (ISGs). Animal challenge experiments further confirmed that DIC-GQDs effectively alleviated clinical symptoms and pathological reactions in the lungs, spleen, and lymph nodes of PRRSV-infected pigs. Discussion: These findings suggest that DIC-GQDs significantly inhibits PRRSV proliferation by activating the JAK/STAT signalling pathway. Therefore, DIC-GQDs hold promise as an alternative treatment for PRRSV infection.

Triplex hairpin oligosensor for ultrasensitive determination of miRNA-155 as a cancer marker using Si quantum dots and Au nanoparticles.

In this study, a new triplex hairpin oligosensor was developed for the determination of a breast cancer biomarker using silicon quantum dots (Si QD) (λex = 370 nm, λem = 482 nm) as donor and gold nanoparticles (GNP) as an acceptor in a FRET (fluorescence resonance energy transfer) mechanism. In the triplex hairpin oligosensor, a triplex-forming oligonucleotide (TFO) labeled with Si QD and a single-strand DNA labeled with GNP form a hairpin shape with a triplex structure at the hairpin stem. In a turn-on mechanism, the triplex hairpin stem is opened in the presence of sequence-specific miRNA-155 which leads to the release of the Si QD-labeled TFO probe and recovery of the fluorescence signal. About 80 % of the fluorescence intensity of the Si QD-TFO is quenched in the triplex hairpin structure of the oligosensor and in the presence of 800 pM miRNA-155, the fluorescence signal recovered to 57.7 % of its initial value. The LOD of about 10 pM was obtained. The designed triplex-based biosensor can discriminate concentrations of breast cancer biomarkers with high selectivity.

InGaAs quantum dot chains grown by twofold selective area molecular beam epitaxy.

Increasing quantum confinement in semiconductor quantum dot (QD) systems is essential to perform robust simulations of many-body physics. By combining molecular beam epitaxy and lithographic techniques, we developed an approach consisting of a twofold selective area growth to build QD chains. Starting from 15 nm-thick and 65 nm-wide in-plane In0.53Ga0.47As nanowires on InP substrates, linear arrays of In0.53Ga0.47As QDs were grown on top, with tunable lengths and separations. Kelvin probe force microscopy performed at room temperature revealed a change of quantum confinement in chains with decreasing QD sizes, which was further emphasized by the spectral shift of quantum levels resolved in the conduction band with low temperature scanning tunneling spectroscopy. This approach, which allows the controlled formation of 25 nm-thick QDs with a minimum length and separation of 30 nm and 22 nm respectively, is suitable for the construction of scalable fermionic quantum lattices.

Binding Energies and Optical Properties of Power-Exponential and Modified Gaussian Quantum Dots.

We examine the optical and electronic properties of a GaAs spherical quantum dot with a hydrogenic impurity in its center. We study two different confining potentials: (1) a modified Gaussian potential and (2) a power-exponential potential. Using the finite difference method, we solve the radial Schrodinger equation for the 1s and 1p energy levels and their probability densities and subsequently compute the optical absorption coefficient (OAC) for each confining potential using Fermi's golden rule. We discuss the role of different physical quantities influencing the behavior of the OAC, such as the structural parameters of each potential, the dipole matrix elements, and their energy separation. Our results show that modification of the structural physical parameters of each potential can enable new optoelectronic devices that can leverage inter-sub-band optical transitions.

Transition Layer Assisted Synthesis of Defect Free Amine-Phosphine Based InP QDs.

Environmentally friendly InP-based quantum dots (QDs) are promising for light-emitting diodes (LEDs) and display applications. So far, the synthesis of highly emitting InP-based QDs via safe and economically viable amine-phosphine remains a challenge. Herein, we report the synthesis of amine-phosphine based InP/ZnSe/ZnS QDs by introducing an alloyed oxidation-free In-ZnSe transition layer (TL) at the core-shell interface. The TL not only has the essential function of preventing oxidation of the core and relieving interfacial strain but also results in oriented epitaxial growth of shell. The alloyed TL significantly mitigates the nonradiative recombination at core-shell interfacial trap states, thereby boosting the photoluminescence (PL) efficiency of the QDs up to 98%. Also, the Auger recombination is suppressed, extending the biexciton lifetime from 60 to 100 ps. The electroluminescence device based on the InP-based QDs shows a high external quantum efficiency over 10%, further demonstrating high quality QDs synthesized by this process.

Stable, Scalable, and Free-Standing Perovskite Quantum Dots Composite Reinforced by Cellulose Fibers.

Perovskite quantum dots (PQDs) have attracted emerging attention as fluorescent and light-absorbing materials for next-generation optoelectronics due to their outstanding properties and cost-efficiency. However, PQD thin film suffers significant instability due to structure and material failures, which hinders their application in flexible and reliable PQD-based advanced wearable devices. Herein, we use commercial cellulose fiber-based filter paper as a substrate to synthesize PQDs in situ and fabricate PQD-paper free-standing flexible composite film. The abundant hydroxy capping ligands of cellulose fibers and the unique dense network structure of the filter paper can facilitate confined crystallization, forming strong interactions between the PQDs and substrate, the unpackaged PQD composite film showed extraordinary stability (>30 days) in the air with high humidity (90%). Meanwhile, the strong interaction between PQDs and paper enables an ultrasimple drop-cast synthesis process with excellent process tolerance, making it customizable and easy to scale up (10 cm in diameter). Due to the uniformly dispersed PQDs on cellulose fibers of the substrate, the composite demonstrates impressive photo-responsive properties. Photodetector (PD) arrays were designed on free-standing PQD paper and flexible graphitic electrodes, and circuits were fabricated by drawing. The PD arrays can work as optical and electrical dual-mode image sensors with incredible bending robustness, enduring up to 100,000 cycles at 180°.

Improvement in Performance and Stability of PbS QD/IGZO Phototransistors Through the Introduction of Ga2O3 Film for Broadband Sensor Applications.

The development of broadband photosensors has become crucial in various fields. Indium-gallium-zinc oxide (IGZO, In:Ga:Zn = 1:1:1) phototransistors with PbS quantum dots (QDs) have shown promising features for such sensors, such as reasonable mobility, low leakage current, good photosensitivity, and low-cost fabrication. However, the instability of PbS QD/IGZO phototransistors under an air atmosphere and prolonged storage remain serious concerns. In this article, two concepts to improve the reliability of PbS QD/IGZO phototransistors were implemented. P-type doping in the PbS QD layer through oxidation allows increasing the built-in potential between IGZO and PbS QDs, leading to enhancement in photoinduced electron-hole pair creation. Second, agglomeration and fusion of a PbS QDs layer were controlled via thermal annealing, which facilitated the transport of photocreated carriers. The p-type doping and interconnection of a PbS QD layer can be achieved by deposition and subsequent thermal annealing of gallium oxide (Ga2O3) on PbS QD/IGZO stacks. The resulting Ga2O3/PbS QD/IGZO phototransistors exhibited high-performance switching characteristics under dark conditions. Notably, they showed a remarkable photoresponsivity of 196.69 ± 4.05 A/W and a detectivity of (5.47 ± 1.4) × 1012 Jones even at a long-wavelength illumination of 1550 nm. While the unpassivated PbS/IGZO phototransistor suffered serious degradation in optical performance after 2 weeks of storage, the Ga2O3/PbS QD/IGZO phototransistor demonstrated enhanced stability, maintaining high performance for over 5 weeks. These findings suggest that Ga2O3/PbS QD/IGZO phototransistors offer a feasible approach for the fabrication of large-scale active matrix broadband photosensor arrays, potentially revolutionizing optical sensing in various cutting-edge applications.

Simultaneous detection of multiple microRNAs based on fluorescence resonance energy transfer under a single excitation wavelength.

MicroRNAs (miRNAs) play a key role in physiological processes, and their dysregulation is closely related to various human diseases. Simultaneous detection of multiple miRNAs is pivotal to cancer diagnosis at an early stage. However, most multicomponent analyses generally involve multiple excitation wavelengths, which are complicated and often challenging to simultaneously acquire multiple detection signals. In this study, a convenient and sensitive sensor was developed to simultaneously detection of multiple miRNAs under a single excitation wavelength through the fluorescence resonance energy transfer between the carbon dots (CDs)/quantum dots (QDs) and graphene oxide (GO). A hybridization chain reaction (HCR) was triggered by miRNA-141 and miRNA-21, resulting in the high sensitivity with a limit of detection (LOD) of 50 pM (3σ/k) for miRNA-141 and 60 pM (3σ/k) for miRNA-21. This simultaneous assay also showed excellent specificity discrimination against the mismatch. Furthermore, our proposed method successfully detected miRNA-21 and miRNA-141 in human serum samples at a same time, indicating its diagnostic potential in a clinical setting.

Influence of Material Properties on Surface Chemistry Induced Circular Dichroism in Halide Perovskite: Computational Insights.

The chirality transfer phenomenon is attractive for enhancing the optical functionality of nanomaterials by inducing sensitivity to the circular polarization states of photons. An underexplored aspect is how material properties of the achiral semiconductor impact the induced chiroptical signatures. Here we apply atomistic time-dependent density functional theory simulations to investigate the material properties that influence the chiroptical signatures of a lead halide perovskite nanocrystal with a chiral molecule bound to the surface. First, we find that both lattice disorder created by surface strain and halide substitution can increase the chiroptical response of the perovskite quantum dots by an order of magnitude. Both phenomena are attributed to a broadening of the density of the electronically excited states. Second, the intensity of the anisotropy spectra decreases with increasing dot size with a power law decay. Overall, these insights can be used to help guide experimental realization of highly resolvable polarized optical features in semiconducting nanomaterials.