RESUMEN
WS2 QDs are inorganic semiconductor nanocrystals which belong to the family of transition metal dichalcogenides (TMDC). As toxic heavy metal free quantum dots, TMDC based QDs is gaining attention due to excellent chemical stability, good thermal conductivity and stable optical properties. In the present study, bright green emissive and excellent WS2 QDs was synthesized by solvothermal liquid exfoliation method using NMP solvent. The size and morphology were confirmed by HRTEM (3-4 nm, spherical). Illumination by 370 nm UV source showed bright green fluorescence due to the excellent quantum confinement effect. The as synthesised WS2 QDs exhibits excellent properties such as stable dispersion, extreme low cytotoxicity as well as fluorescent properties, which makes them suitable candidates for optoelectronic and biological applications. Cytotoxicity analysis via NRU assay confirmed the low cytotoxic potential. Subcellular localization confirmed the distribution of WS2 QDs around the nucleus. Spleenocyte proliferation via radioactivity measurement showed lack of any immune response. ICP-MS analysis showed that a significant amount of the administered WS2 QDs was found in the urine samples when compared to feces, which confirmed the renal excretion route of the material. WS2 QDs didnot evoke any evident toxic response upto 10 mg/kg body weight i.p administration. Excellent fluorescence property shown by this material marked its prominence in in vitro/ in vivo imaging and other biomedical applications. The study proved that WS2 QDs are excellent candidate materials validated to be safe material for biomedical applications.
Asunto(s)
Puntos Cuánticos , Puntos Cuánticos/química , Distribución Tisular , Sulfuros/química , Espectrometría de MasasRESUMEN
Brain-eating amoebae, including Acanthamoeba castellanii and Naegleria fowleri, are the causative agents of devastating central nervous system infections with extreme mortality rates. There is an indisputable urgency for the development of effective chemotherapeutic agents for the control of these diseases that are increasing in incidence. Here, we evaluated the anti-amoebic potential of polyaniline:tungsten disulphide (PANI:WS2) nanocomposite against the infective trophozoite and cyst stages of N. fowleri and A. castellanii. Throughout these evaluations, significant viability inhibition was noted when 100 µg/mL of PANI:WS2 was employed at its 1:5 formulation. These effects were studied to be due to increased levels of reactive oxygen species (ROS) as visualised through fluorescence microscopy. Furthermore, field emission scanning electron microscopy (FE-SEM) analysis pictured disruption to amoeba morphology. The host-cell cytotoxicity of the nanocomposite (PANI:WS2) was studied to be negligible, making it an attractive avenue in the pursuit for effective treatments for brain-eating amoeba infections. KEY POINTS: ⢠Synthesis of polyaniline:tungsten disulphide (PANI:WS2) nanocomposite. ⢠Anti-amoebic potential of PANI:WS2 nanocomposite. ⢠PANI:WS2 nanocomposites are promising anti-amoebic agents in vitro.
Asunto(s)
Nanopartículas del Metal , Naegleria fowleri , Compuestos de Anilina , Encéfalo , Sulfuros , Compuestos de TungstenoRESUMEN
Tungsten disulphide (WS2) is a two-dimensional transition-metal dichalcogenide material that can be used to improve the sensitivity of a variety of sensing applications. This study investigated the effect of WS2 coating on tapered region microfiber (MF) for relative humidity (RH) sensing applications. The flame brushing technique was used to taper the standard single-mode fiber (SMF) into three different waist diameter sizes of MF 2, 5, and 10 µm, respectively. The MFs were then coated with WS2 via a facile deposition method called the drop-casting technique. Since the MF had a strong evanescent field that allowed fast near-field interaction between the guided light and the environment, depositing WS2 onto the tapered region produced high humidity sensor sensitivity. The experiments were repeated three times to measure the average transmitted power, presenting repeatability and sensing stability. Each MF sample size was tested with varying humidity levels. Furthermore, the coated and non-coated MF performances were compared in the RH range of 45-90% RH at room temperature. It was found that the WS2 coating on 2 µm MF had a high sensitivity of 0.0861 dB/% RH with linearity over 99%. Thus, MF coated with WS2 encourages enhancement in the evanescent field effect in optical fiber humidity sensor applications.
RESUMEN
Background: Engineered nanomaterials (ENMs) have already made their way into myriad applications and products across multiple industries. However, the potential health risks of exposure to ENMs remain poorly understood. This is particularly true for the emerging class of ENMs know as 2-dimensional nanomaterials (2DNMs), with a thickness of one or a few layers of atoms arranged in a planar structure. Methods: The present study assesses the biotransformations and in vitro cytotoxicity in the gastrointestinal tract of 11 2DNMs, namely graphene, graphene oxide (GO), partially reduced graphene oxide (prGO), reduced graphene oxide (rGO), hexagonal boron nitride (h-BN), molybdenum disulphide (MoS2), and tungsten disulphide (WS2). The evaluated pristine materials were either readily dispersed in water or dispersed with the use of a surfactant (Na-cholate or PF108). Materials dispersed in a fasting food model (FFM, water) were subjected to simulated 3-phase (oral, gastric, and small intestinal) digestion to replicate the biotransformations that would occur in the GIT after ingestion. A triculture model of small intestinal epithelium was used to assess the effects of the digested products (digestas) on epithelial layer integrity, cytotoxicity, viability, oxidative stress, and initiation of apoptosis. Results: Physicochemical characterization of the 2DNMs in FFM dispersions and in small intestinal digestas revealed significant agglomeration by all materials during digestion, most prominently by graphene, which was likely caused by interactions with digestive proteins. Also, MoS2 had dissolved by ~75% by the end of simulated digestion. Other than a low but statistically significant increase in cytotoxicity observed with all inorganic materials and graphene dispersed in PF108, no adverse effects were observed in the exposed tricultures. Conclusions: Our results suggest that occasional ingestion of small quantities of 2DNMs may not be highly cytotoxic in a physiologically relevant in vitro model of the intestinal epithelium. Still, their inflammatory or genotoxic potential after short- or long-term ingestion remains unclear and needs to be studied in future in vitro and in vivo studies. These would include studies of effects on co-ingested nutrient digestion and absorption, which have been documented for numerous ingested ENMs, as well as effects on the gut microbiome, which can have important health implications.
RESUMEN
This study reports the electrical transport and the field emission properties of individual multi-walled tungsten disulphide (WS2 ) nanotubes (NTs) under electron beam irradiation and mechanical stress. Electron beam irradiation is used to reduce the nanotube-electrode contact resistance by one-order of magnitude. The field emission capability of single WS2 NTs is investigated, and a field emission current density as high as 600 kA cm-2 is attained with a turn-on field of ≈100 V µm-1 and field-enhancement factor ≈50. Moreover, the electrical behavior of individual WS2 NTs is studied under the application of longitudinal tensile stress. An exponential increase of the nanotube resistivity with tensile strain is demonstrated up to a recorded elongation of 12%, thereby making WS2 NTs suitable for piezoresistive strain sensor applications.
RESUMEN
Transition metal dichalcogenides (TMCs) exhibit unique properties that make them of interest for catalysis, sensing or energy storage applications. However, few studies have been performed into nanofluids based on TMCs for heat transfer applications. In this study, nanofluids based on 2D-WS2 are prepared by liquid phase exfoliation to analyze their potential usage in concentrating solar power plants. Periodic-Density Functional Theory (DFT) calculations were performed to rationalize the success of the exfoliation process. The hydrogen bond interaction between the hydroxyl group from PEG, which acts as a surfactant, and the S atoms of the WS2 surface stabilizes the nanosheets in the fluid. Electron localization function (ELF) analysis is indicative of the stability of the S-H interaction from WS2 with the molecules of surfactant due to the tendency to interact through weak intermolecular forces of van der Waals solids. Moreover, improvements in thermal properties were also found. Isobaric specific heat increased by up to 10% and thermal conductivity improved by up to 37.3%. The high stability of the nanofluids and the thermal improvements were associated with the high surface area of WS2 nanosheets. These results suggest that these nanofluids could be a promising heat transfer fluid in concentrating solar power plants.
RESUMEN
A high-performance screen-printed electrode (SPE) based nanocomposite sensor integrating tungsten disulfide (WS2) flakes decorated with catechin-capped gold nanoparticles (AuNP-CT) and carbon black (CB) has been developed. The excellent antifouling properties of WS2 decorated with AuNP-CT into a high conductivity network of CB results in high selectivity, sensitivity, and reproducibility for the simultaneous determination of hydroxycinnamic acid (hCN) structural analogs: caffeic (CF), sinapic (SP), and p-coumaric acids (CM). Using differential pulse voltammetry (DPV), the target hCNs resulted in three well-resolved oxidation peaks at SPE-CB-WS2/AuNP-CT sensor. Excellent antifouling performance (RSD ip,a ≤ 3%, n = 15 for three analytes' simultaneous measure) and low detection limits (CF 0.10 µmol L-1; SP, 0.40 µmol L-1; CM, 0.40 µmol L-1) are obtained despite the analyzed compounds having a high passivation tendency towards carbon-based sensors. The SPE-CB-WS2/AuNP-CT sensor was successfully applied to determine CF, SP, and CM in food samples with good precision (RSD ≤ 4%, n = 3) and recoveries (86-109%; RSD ≤ 5%, n = 3). The proposed sensor is the first example exploiting the simultaneous determination of these compounds in food samples. Given its excellent electrochemical performance, low cost, disposability, and ease of use, this SPE-CB-WS2/AuNP-CT nanocomposite sensor represents a powerful candidate for the realization of electrochemical devices for the determination of (bio)compounds with high passivation tendency. Graphical abstract.