Krill Oil and Its Bioactive Components as a Potential Therapy for Inflammatory Bowel Disease: Insights from In Vivo and In Vitro Studies.

Krill oil is extracted from krill, a small crustacean in the Antarctic Ocean. It has received growing attention because of krill oil's unique properties and diverse health benefits. Recent experimental and clinical studies suggest that it has potential therapeutic benefits in preventing the development of a range of chronic conditions, including inflammatory bowel disease (IBD). Krill oil is enriched with long-chain n-3 polyunsaturated fatty acids, especially eicosapentaenoic and docosahexaenoic acids, and the potent antioxidant astaxanthin, contributing to its therapeutic properties. The possible underlying mechanisms of krill oil's health benefits include anti-inflammatory and antioxidant actions, maintaining intestinal barrier functions, and modulating gut microbiota. This review aims to provide an overview of the beneficial effects of krill oil and its bioactive components on intestinal inflammation and to discuss the findings on the molecular mechanisms associated with the role of krill oil in IBD prevention and treatment.

Enzymatically produced acylglycerol and glycerin monostearate additives improved the characteristics of gelatin-stabilized omega-3 emulsions and microcapsules.

The impacts of enzymatically produced acylglycerol and glycerin monostearate on the characteristics of gelatin-stabilized omega-3 emulsions and microcapsules were investigated. Tuna oil was enzymatically produced and the resulting acylglycerol was mixed with tuna oil at 12.5% (w/w) to prepare a novel oil phase. This oil phase was stabilized by gelatin to prepare oil-in-water emulsions and subsequent microcapsules via complex coacervation. The tuna oil with glycerin monostearate (GMS) at 1 and 2% (w/w) were used as controls. Results showed that both acylglycerol and GMS significantly reduced the emulsion droplet size and zeta potential, while increasing the viscoelasticity and stability. The diacylglycerol/monoacylglycerol were involved in the oil/water interfacial layer formation by lowering interfacial tension and increasing droplet surface hydrophobicity. Overall, the changed emulsion properties promoted the complex coacervation and contributed to the formation of microcapsules with improved oxidative stability. Therefore, enzymatically produced acylglycerol can develop high-quality stable omega-3 microencapsulated novel food ingredients.

Encapsulation and characterization of soy protein-based ω-3 medium- and long- chain triacylglycerols microencapsulated with diverse homogenization techniques for improving oxidation stability.

Recently, MLCTs have attracted considerable attention as a potential alternative to traditional oils due to their suppressive effect on fat accumulation and insulin sensitivity. In this study, the microcapsules of MLCTs with superior performance were fabricated through different homogenization processes to overcome the limitations of ω-3 medium- and long- chain triacylglycerols (MLCTs), including poor stability and prone oxidation. Additionally, the impact of various homogenization techniques, namely, high-pressure, ultrasound, and cavitation jet, on the particle structure, encapsulation efficiency, and oxidation stability of microcapsules (MLCTs) was investigated. The MLCTs microcapsules fabricated through high-pressure homogenization had a smaller particle size of 295.12 nm, lower PDI of 0.24, and a higher zeta-potential absolute value of 32.65, which significantly improved their dispersion and encapsulation efficiency, reaching 94.56 % after the spray-drying process. Furthermore, the low moisture content and superior storage stability of MLCTs microcapsules have the potential to serve as carriers of liposoluble actives.

Combined cross-linking of Rhizomucor miehei lipase and Candida antarctica lipase B for the effective enrichment of omega-3 fatty acids in fish oil.

The incorporation of a non-specific lipase and a sn-1,3 specific one in a single immobilized system can be a promising approach for the exploitation of both lipases. A one-step immobilization platform mediated by an isocyanide-based multi-component reaction was applied to create co-cross-linked enzymes (co-CLEs) of lipases from Rhizomucor miehei (sn-1,3 specific) and Candida antarctica (non-specific). Glutaraldehyde was found to be effective cross-linker by producing specific activity of 16.9 U/mg and immobilization yield of 99 %. High activity recovery of up to 404 % was obtained for immobilized derivatives. Leaking experiment showed covalent nature of the cross-linking processes. BSA had considerable effect on the immobilization process, providing 87-100 % immobilization yields and up to 10 times improvement in the specific activity of the immobilized derivatives. Scanning electron microscopy images showed flower-like and rod-like structures for the CLEs prepared by glutaraldehyde and undecanedicarboxylic acid, respectively. The prepared co-CLEs were examined in non-selective enrichment of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) from fish oil, showing capability of releasing up to 100 % of both omega-3 fatty acids within 8 h of the reaction. The reusability of co-CLEs in five successive cycles presented retaining 63-72 % of their initial activities after the fifth reuse cycle in the hydrolysis reaction.

Characterization of fatty acid forms using benchtop NMR in omega-3 oil supplements.

Omega-3 fatty acid supplements, such as fish oil and plant-based oils, have gained popularity because of their potential health benefits. However, the quality and composition of these supplements can vary widely, particularly in terms of the two main forms of omega-3 fatty acids: triacylglycerols (TAGs) and ethyl esters (EEs). TAGs are the natural form found in fish oil but are prone to oxidation, whereas EEs are more stable but less well absorbed by the body. Differentiating between these forms is crucial for assessing the efficacy and tolerance of omega-3 supplements. This article describes a novel approach to differentiate between TAG and EE forms of omega-3 fatty acids in dietary supplements, utilizing a 60-MHz benchtop nuclear magnetic resonance (NMR) spectrometer. The proposed method using 1H and 1H-1H COSY NMR provides a quick and accurate approach to screen the forms of omega-3 fatty acids and evaluate their ratios. The presence of diacylglycerol (DAGs) in some supplements was also highlighted by this method and adds some information about the process used (i.e., esterification/enrichment). The affordability and user-friendliness of benchtop NMR equipment make this method feasible for food processing companies or quality control laboratories. In this study, 24 oil supplements were analyzed using NMR analysis in order to demonstrate the potential of this method for the differentiation of TAG and EE forms in omega-3 supplements.

Extraction, separation and purification of fatty acid ethyl esters for biodiesel and DHA from Thraustochytrid biomass.

A novel approach for in situ transesterification, extraction, separation, and purification of fatty acid ethyl esters (FAEE) for biodiesel and docosahexaenoic acid (DHA) from Thraustochytrid biomass has been developed. The downstream processing of Thraustochytrids oil necessitates optimization, considering the higher content of polyunsaturated fatty acids (PUFA). While two-step methods are commonly employed for extracting and transesterifying oil from oleaginous microbes, this may result in oxidation/epoxidation of omega-3 oil due to prolonged exposure to heat and oxygen. To address this issue, a rapid single-step method was devised for in situ transesterification of Thraustochytrid oil. Through further process optimization, a 50% reduction in solvent requirement was achieved without significantly impacting fatty acid recovery or composition. Scale-up studies in a 4 L reactor demonstrated complete FAEE recovery (99.98% of total oil) from biomass, concurrently enhancing DHA yield from 16% to nearly 22%. The decolorization of FAEE oil with fuller's earth effectively removed impurities such as pigments, secondary metabolites, and waxes, resulting in a clear, shiny appearance. High-performance liquid chromatography (HPLC) analysis indicated that the eluted DHA was over 94.5% pure, as corroborated by GC-FID analysis.

Enrichment of a fruit-based smoothie beverage with omega-3 fatty acids from microencapsulated chia seed oil.

BACKGROUND: Omega-3 fatty acids are known for their various health benefits. Chia is the richest vegetable source of omega-3 fatty acids. However, its oil is highly susceptible to oxidative deterioration and should be protected for incorporation into food matrices. This work aimed to study the incorporation of different chia oil microcapsules in a powdered beverage, analyzing the effect on the physicochemical characteristics and stability during storage. RESULTS: Different types of microcapsules were obtained: monolayer microcapsules using sodium caseinate and lactose as wall material, and multilayer microcapsules produced through electrostatic deposition using lecithins, chitosan, and chia mucilage as the first, second, and third layers, respectively. The results demonstrated an efficient enrichment of smoothies, with omega-3 fatty acid values ranging from 24.09% to 42.73%, while the original food matrix powder lacked this component. These powder beverages exhibited low moisture content (≤ 2.91%) and low water activity (≤ 0.39). The aerated, packed density and compressibility assays indicated that adding microcapsules made the powders less dense and compressible. The color of the original powdered beverage was not modified. The dispersibility reflected an acceptable instantaneity, reaching the maximum obscuration after 30 s of stirring. The solubility of all the enriched products was higher than 70%, whereas the pH was ~6.8. The contact angle between the powder and liquid indicated an excellent ability to be reconstituted in water. The analysis of the glass transition temperature showed that the storage temperature (25 °C) was adequate. The peroxide value of all the products was low throughout the storage (≤ 1.63 meq peroxide kg-1 of oil at 90 days at 25 ± 2 °C), thus maintaining the quality of the microencapsulated chia oil. CONCLUSIONS: The results suggest that incorporating the monolayer and multilayer chia oil microcapsules that were studied could be a viable strategy for enriching smoothies with the omega-3 fatty acids present in chia seed oil. © 2023 Society of Chemical Industry.

Walnut (Juglans regia L.) kernel oil bodies recovered by aqueous extraction for utilization as ingredient in food emulsions: Exploration of their microstructure, composition and the effects of homogenization, pH, and salt ions on their physical stability.

Natural oil-in-water emulsions containing plant oil bodies (OBs), also called oleosomes, rich in health-promoting omega-3 polyunsaturated fatty acids (ω3 PUFA) are of increasing interest for food applications. In this study, we focused on walnut kernel OBs (WK-OBs) and explored their microstructure, composition and physical stability in ionic environments as well as the impact of homogenization. A green process involving aqueous extraction by grinding of WK allowed the co-extraction of OBs and proteins, and centrifugation was used to recover the WK-OBs. Confocal laser scanning microscopy images showed the spherical shape of WK-OBs with an oil core envelopped by a layer of phospholipids (0.16 % of lipids) and embedded proteins. Their mean diameter was 5.1 ± 0.3 µm. The WK-OBs contained 70.1 % PUFA with 57.8 % ω6 linoleic acid and 12.3 % ω3 α-linolenic acid representing 68 % and 11.6 % of the total fatty acids in the sn-2 position of the triacylglycerols (TAG), respectively. Trilinolein was the main TAG (23.1 %). The WK-OBs also contained sterols (1223 ± 33 mg/kg lipids; 86 % ß-sitosterol), carotenoids (0.62 ± 0.01 mg/kg lipids; 49.2 % ß-carotene), and tocopherols (322.7 ± 7.7 mg/kg lipids; 89 % γ-tocopherol), confirming their interest as health-promoting ingredients. The decrease in the size of WK-OBs under high-pressure homogenization avoided phase separation upon storage. The anionic WK-OB surface at neutral pH was affected by stressful ionic environments (pH, NaCl, CaCl2), that induced aggregation of WK-OBs and decreased the physical stability of the emulsions. Emulsions containing WK-OBs are promising to diversify the market of the ω3-rich plant-based food products and beverages.

Fatty Acid Positions in Triacylglycerol of Iridescent Shark Fish Oil (Pangasius sp.), Focusing on Omega-3 and Omega-6 Fatty Acids.

<b>Background and Objective:</b> Considering the many health benefits of fish oil, the potential of Indonesian fisheries needs to be mapped to find local fish oil sources that have the opportunity to be used as a source of omega-3 and 6. This research aimed to ascertain the glyceride profile of iridescent shark fish oil hydrolyzed by immobilized lipase from <i>Thermomyces lanuginosus</i> at the sn-1,3 position and identify the position of omega-3 and omega-6 fatty acids. <b>Materials and Methods:</b> To extract the fish oil from the iridescent shark, the soxhletation method was utilized. The analysis of the fatty acid composition that was carried out using gas chromatography (GC) was previously esterified with BF₃ before it was carried out to position the fatty acid hydrolysis that was carried out using lipase enzymes to position the fatty acid composition. <b>Results:</b> The sample had more unsaturated fatty acids than saturated ones. Omega-3 and omega-6 fatty acids are more concentrated in the fat molecule's sn-2 position than in the sn-1+sn-3 location. Iridescent shark fish oil meets the recommended ratio of omega-3 to omega-6 (1:1) or better (2:1). <b>Conclusion:</b> It has been discovered that iridescent shark fish oil is rich in omega-3 and omega-6 fatty acids, especially those in the sn-2 position. This makes it a great food choice for those trying to get more omega-3 unsaturated fatty acids into their diets.

Application of Chromatographic and Spectroscopic-Based Methods for Analysis of Omega-3 (ω-3 FAs) and Omega-6 (ω-6 FAs) Fatty Acids in Marine Natural Products.

Omega-3 fatty acids v(ω-3 FAs) such as EPA (eicosapentaenoic acid) and DHA (docosahexaenoic acid) and omega-6 fatty acids (ω-6 FAs) such as linoleic acid and arachidonic acid are important fatty acids responsible for positive effects on human health. The main sources of ω-3 FAs and ω-6 FAs are marine-based products, especially fish oils. Some food, supplements, and pharmaceutical products would include fish oils as a source of ω-3 FAs and ω-6 FAs; therefore, the quality assurance of these products is highly required. Some analytical methods mainly based on spectroscopic and chromatographic techniques have been reported. Molecular spectroscopy such as Infrared and Raman parallel to chemometrics has been successfully applied for quantitative analysis of individual and total ω-3 FAs and ω-6 FAs. This spectroscopic technique is typically applied as the alternative method to official methods applying chromatographic methods. Due to the capability to provide the separation of ω-3 FAs and ω-6 FAs from other components in the products, gas and liquid chromatography along with sophisticated detectors such as mass spectrometers are ideal analytical methods offering sensitive and specific results that are suitable for routine quality control.

Development of meat spread with omega-3 fatty acids derived from flaxseed oil for the elderly: Physicochemical, textural, and rheological properties.

This study evaluates the characteristics of n-3-enriched meat spread that is in development for consumption by elderly individuals. Herein, flaxseed oil was used as a source of n-3 fatty acid, and macro- and nano-sized flaxseed oil emulsions (FOE) were prepared for the fabrication of meat spreads. As the level of FOE was increased in the meat spreads, significant increases in the levels of omega-3 fatty acids (α-linolenic acid) were observed. Emulsion stability and cooking loss were also improved in meat spreads formulated with FOE compared with those the control. In particular, the addition of FOE generated softer and less chewy meat, owing to its lower melting point and rheological properties. However, the high content of unsaturated fatty acids in the FOE-containing meat spreads increased their susceptibility to lipid oxidation meat. These findings indicate that FOE, particularly macro-sized FOE, has the potential for use in n-3 fatty acid enriched meat products that are intended for consumption by elderly individuals but need to be evaluated for their impacts on shelf-life and sensory quality.

Enzymatic enrichment of acylglycerols rich in n - 3 polyunsaturated fatty acids by selective methanolysis: Optimization and kinetic studies.

n - 3 Polyunsaturated fatty acids (n - 3 PUFA) have special physiological effect, but their contents in natural oils may not meet the growing demand. Lipase-catalyzed selective methanolysis could be used to produce acylglycerols rich in n - 3 PUFA. To explore the kinetics of enzymatic methanolysis, factors affecting the reaction, including reaction system, water content, substrate molar ratio, temperature, lipase loading, and reaction time, were first investigated in the view of optimizing the reaction. Then the effects of triacylglycerol concentrations and methanol concentrations on initial reaction rate were studied. Finally, the key kinetic parameters of methanolysis were determined subsequently. The results showed that under optimal conditions, the n - 3 PUFA content in acylglycerols increased from 39.88% to 71.41%, and the n - 3 PUFA yield was 73.67%. The reaction followed a Ping-Pong Bi Bi mechanism with inhibition by methanol. The kinetic analysis indicated the lipase could selectively remove saturated fatty acids (SFA) and monounsaturated fatty acids (MUFA) in acylglycerols. The inhibition constant of methanol to the n - 3 PUFA (KiM , 0.30 mmol/L) was lower than that to the SFA and MUFA (219.64 and 79.71 mmol/L). The combined effects of the fatty acid selectivity of Candida antarctica lipase A and methanol inhibition resulted in an enrichment of n - 3 PUFA in acylglycerols. Overall, the methanolysis reaction catalyzed by the lipase A is a prospective enrichment method. PRACTICAL APPLICATION: This study demonstrated that enzymatic selective methanolysis is a prospective enrichment method to produce acylglycerols rich in n - 3 PUFA. This method is highly efficient, environment-friendly, and simple. n - 3 PUFA concentrates have been widely applied in the food, health-care food, and pharmaceutical industries.

Unsaturated bond recognition leads to biased signal in a fatty acid receptor.

Individual free fatty acids (FAs) play important roles in metabolic homeostasis, many through engagement with more than 40G protein-coupled receptors. Searching for receptors to sense beneficial omega-3 FAs of fish oil enabled the identification of GPR120, which is involved in a spectrum of metabolic diseases. Here, we report six cryo-electron microscopy structures of GPR120 in complex with FA hormones or TUG891 and Gi or Giq trimers. Aromatic residues inside the GPR120 ligand pocket were responsible for recognizing different double-bond positions of these FAs and connect ligand recognition to distinct effector coupling. We also investigated synthetic ligand selectivity and the structural basis of missense single-nucleotide polymorphisms. We reveal how GPR120 differentiates rigid double bonds and flexible single bonds. The knowledge gleaned here may facilitate rational drug design targeting to GPR120.

Combining antioxidants and processing techniques to improve oxidative stability of a Schizochytrium algal oil ingredient with application in yogurt.

Oxidative instability limits incorporation of ω-3 fatty acids (FAs) into some products. This research combined processing techniques with antioxidant addition to overcome these barriers. Oleogels, microencapsulates, and microencapsulated gel ingredients were prepared using Schizochytrium spp. algal oil (AO) in combination with α, ß, γ, and δ tocopherols or 1-o-galloylglycerol (GG) as antioxidants. Ingredients were tested for physicochemical stability and optimal ingredients were selected to prepare yogurts as a model food with ideal matrix. Yogurts were analyzed for physicochemical properties. After 24-days storage at 4 °C, yogurt containing microencapsulated oleogel with GG as antioxidant exhibited average peroxide and p-Anisidine values of 7.17 mmol O2/kg of oil and 118.85 abs/g, respectively. These values were similar to store-bought yogurt using saturated fat source, with values of 6.83 mmol O2/kg of oil and 117.95 absorbance/g, respectively. These results could lead to incorporation of ω-3 FAs into foods, cosmetics, and pharmaceuticals in the future.

Complex coacervation and freeze drying using whey protein concentrate, soy protein isolate and arabic gum to improve the oxidative stability of chia oil.

BACKGROUND: Chia oil (CO) is popular for being the richest vegetable source of α-linolenic acid (60-66%). However, this content of polyunsaturated fatty acids (PUFA) limits the incorporation of bulk CO in food products due to its high probability of oxidation. This justifies the study of alternative wall materials for microencapsulation. No reports regarding the use of dairy protein/vegetable protein/polysaccharide blends as wall material for the microencapsulation of CO have been published. Therefore, this work analyzed the behavior of a whey protein concentrate (WPC)/soy protein isolate (SPI)/arabic gum (AG) blend as wall material. The complex coacervation (CC) process was studied: pH, 4.0; total solid content, 30% w/v; WPC/SPI/AG ratio, 8:1:1 w/w/w; stirring speed, 600 rpm; time, 30 min; room temperature. RESULTS: The oxidative stability index (OSI) of CO (3.25 ± 0.16 h) was significantly increased after microencapsulation (around four times higher). Furthermore, the well-known matrix-forming ability of AG and WPC helped increase the OSI of microencapsulated oils. Meanwhile, SPI contributed to the increase of the encapsulation efficiency due to its high viscosity. Enhanced properties were observed with CC: encapsulation efficiency (up to 79.88%), OSIs (from 11.25 to 12.52 h) and thermal stability of microcapsules given by the denaturation peak temperatures of WPC (from 77.12 to 86.00 °C). No significant differences were observed in the fatty acid composition of bulk and microencapsulated oils. CONCLUSION: Microcapsules developed from complex coacervates based on the ternary blend represent promising omega-3-rich carriers for being incorporated into functional foods.

Effect of vegetable oil hydrogel emulsion as a fat substitute on the physicochemical properties, fatty acid profile, and color stability of modified atmospheric packaged buffalo burgers.

Buffalo burgers were prepared with 50% or 100% buffalo backfat substitution using walnut, and peanut oil emulsion gels (EGs) blended with chia flour. Burgers were stored at 2 °C in modified atmosphere packaging for 12 days. The fat replacement decreased total fat by 26% and increased ash by 34%. Hardness and chewiness decreased with increasing the fat replacement; however, it did not affect springiness and cohesiveness values. Burger reformulations led to an increase in cooking yield (10%). Walnut oil EGs increased PUFA level up to 458%. Both oils enhanced PUFA/SFA and ω-6/ω-3 ratios and atherogenic and thrombogenic indices. Concerning color attribute, about 66% reduction was observed in redness values during the storage period of 12 days. Moreover, the sensory scores for all attributes, i.e., appearance, odor, flavor, and juiciness, were in the acceptable range of five or above in the reformulated burgers. In conclusion, 50% fat substitution using walnut and peanut oil EGs improved the nutritional profile of buffalo burgers without compromising the technological and sensory characteristics.

Polyphenol-Enriched Protein Oleogels as Potential Delivery Systems of Omega-3 Fatty Acids.

Omega-3 polyunsaturated fatty acids (n-3 FAs) are essential nutrients and are considered effective in improving human health. Recent studies highlight the importance of the combination of n-3 FAs and polyphenols for limiting the oxidation of n-3 FAs and exhibiting synergistic beneficial effects. Herein, we developed a novel formulation technology to prepare oleogels that could be used for the codelivery of n-3 FAs and polyphenols with high loading efficacy and oxidative stability. These oleogels are made from algal oil with polyphenol-enriched whey protein microgel (WPM) particles as gelling agents via simple and scalable ball milling technology. The oxidative status, fatty acid composition, and volatiles of protein oleogels during accelerated storage were systematically assessed by stoichiometry and gas chromatography-mass spectrometry. These results showed that protein oleogels could overcome several challenges associated with the formulation of n-3 oils, including long-term oxidative stability and improved sensory and textural properties. The protein oleogel system could provide an excellent convenience for formulating multiple nutrients and nutraceuticals with integrating health effects, which are expected to be used in the care of highly vulnerable populations, including children, the elderly, and patients.

Composition, processing, and quality control of whole flaxseed products used to fortify foods.

Whole flaxseed (flour) as a good source of omega-3 fatty acid and phytochemicals with excellent nutritional and functional attributes has been used to enrich foods for health promotion and disease prevention. However, several limitations and contemporary challenges still impact the development of whole flaxseed (flour)-enriched products on the global market, such as naturally occurring antinutritional factors and entrapment of nutrients within food matrix. Whole flaxseed (flour) with different existing forms could variably alter the techno-functional performance of food matrix, and ultimately affect the edible qualities of fortified food products. The potential interaction mechanism between the subject and object components in fortified products has not been elucidated yet. Hence, in this paper, the physical structure and component changes of flaxseed (flour) by pretreatments coupled with their potential influences on the edible qualities of multiple fortified food products were summarized and analyzed. In addition, several typical food products, including baked, noodle, and dairy products were preferentially selected to investigate the potential influencing mechanisms of flaxseed (flour) on different substrate components. In particular, the altered balance between water absorption of flaxseed protein/gum polysaccharides and the interruption of gluten network, lipid lubrication, lipid-amylose complexes, syneresis, and so forth, were thoroughly elucidated. The overall impact of incorporating whole flaxseed (flour) on the quality and nutritional attributes of fortified food products, coupled with the possible solutions against negative influences are aimed. This paper could provide useful information for expanding the application of whole flaxseed (flour) based on the optimal edible and nutritional properties of fortified food products.

Effects of Cold Pressed Chia Seed Oil Intake on Hematological and Biochemical Biomarkers in Both Normal and Hypercholesterolemic Rabbits.

Most of the studies on the beneficial effects of chia have been conducted with its seeds. There is less evidence about the effects of cold pressed chia seeds oil on hypercholesterolemia-induced alterations. Thus, this study investigated the effects of cold pressed chia seed oil supplementation on certain hematological and biochemical biomarkers in both normal and hypercholesterolemic rabbits. Thirty two male rabbits were assigned to four different groups and fed on: 1) a regular diet (CD), 2) CD supplemented with 10% chia oil, 3) CD supplemented with 1% cholesterol, 4) CD supplemented with 1% cholesterol and 10% chia oil. After six weeks of dietary interventions, mean arterial blood pressure and visceral fat were measured and blood samples were analyzed for lipid profiles and hematological parameters while erythrocyte membranes and retroperitoneal fat were analyzed for fatty acids composition and biochemical biomarkers. Dietary intervention with chia oil achieved control of the hypercholesterolemia-induced increase of mean arterial blood pressure, neutrophil to lymphocytes ratio, erythrocyte membrane fluidity, and improved erythrocyte morphological alterations. With regard to inflammatory biomarkers, chia oil supplementation reduced omega-6/omega-3 polyunsaturated fatty acids ratios and arachidonic/linolenic fatty acids ratios both in erythrocytes and fat from normal and hypercholesterolemic rabbits. The increase of linolenic fatty acid into the retroperitoneal fat was about 9 times higher than its respective controls. These results provide support for the potential health benefits of chia oil intake on hypercholesterolemia-associated clinical, hematological and biochemical alterations.

Essential lipid autacoids rewire mitochondrial energy efficiency in metabolic dysfunction-associated fatty liver disease.

BACKGROUND AND AIM: Injury to hepatocyte mitochondria is common in metabolic dysfunction-associated fatty liver disease. Here, we investigated whether changes in the content of essential fatty acid-derived lipid autacoids affect hepatocyte mitochondrial bioenergetics and metabolic efficiency. APPROACH AND RESULTS: The study was performed in transgenic mice for the fat-1 gene, which allows the endogenous replacement of the membrane omega-6-polyunsaturated fatty acid (PUFA) composition by omega-3-PUFA. Transmission electron microscopy revealed that hepatocyte mitochondria of fat-1 mice had more abundant intact cristae and higher mitochondrial aspect ratio. Fat-1 mice had increased expression of oxidative phosphorylation complexes I and II and translocases of both inner (translocase of inner mitochondrial membrane 44) and outer (translocase of the outer membrane 20) mitochondrial membranes. Fat-1 mice also showed increased mitofusin-2 and reduced dynamin-like protein 1 phosphorylation, which mediate mitochondrial fusion and fission, respectively. Mitochondria of fat-1 mice exhibited enhanced oxygen consumption rate, fatty acid ß-oxidation, and energy substrate utilization as determined by high-resolution respirometry, [1- 14 C]-oleate oxidation and nicotinamide adenine dinucleotide hydride/dihydroflavine-adenine dinucleotide production, respectively. Untargeted lipidomics identified a rich hepatic omega-3-PUFA composition and a specific docosahexaenoic acid (DHA)-enriched lipid fingerprint in fat-1 mice. Targeted lipidomics uncovered a higher content of DHA-derived lipid autacoids, namely resolvin D1 and maresin 1, which rescued hepatocytes from TNFα-induced mitochondrial dysfunction, and unblocked the tricarboxylic acid cycle flux and metabolic utilization of long-chain acyl-carnitines, amino acids, and carbohydrates. Importantly, fat-1 mice were protected against mitochondrial injury induced by obesogenic and fibrogenic insults. CONCLUSION: Our data uncover the importance of a lipid membrane composition rich in DHA and its lipid autacoid derivatives to have optimal hepatic mitochondrial and metabolic efficiency.