An effervescence-assisted dispersive liquid-liquid microextraction based on three-component deep eutectic solvent for the determination of fluoroquinolones in foods.

An effervescence-assisted dispersive liquid-liquid microextraction approach using three-component deep eutectic solvent based on short-chain and medium-chain carboxylic acids and terpenoid was developed for the first time. The microextraction procedure was applied to the determination of fluoroquinolone antibiotics in foods (milk and shrimp samples) by high-performance liquid chromatography with fluorometric detection. In this microextraction procedure three-component deep eutectic solvent acted as a proton donor agent and an extractant. The carbon dioxide bubbles caused by the fast reaction between precursor of deep eutectic solvent (short-chain carboxylic acid) and effervescent agent (sodium carbonate) promoted the dispersion of the extractant in an aqueous sample phase. Various carboxylic acids were studied as hydrogen bond donors for the formation of deep eutectic solvents and proton donor agents for the generation of CO2 bubbles. Two natural terpenoids (menthol and thymol) were studied as the hydrogen bond acceptors for the formation of three-component solvent. The extraction system based on heptanoic acid and thymol (1:2, mol/mol) containing formic acid (proton donor for generating CO2 bubbles) provided maximum extraction recovery (86-99%) and a higher extraction efficiency of analytes compared to their extraction into individual hydrophobic precursors of the system. The LODs, calculated from the blank tests based on 3σ, were varied from 0.03 to 0.06 µg L-1 and from 0.3 to 0.6 µg kg-1 for fluoroquinolone antibiotics in milk and shrimp samples, respectively. The proposed approach provided effective dispersion of extractant speeding up the extraction process and fast separation of phases without any external energy assistance.

Characterization of the oral breakdown, sensory properties, and volatile release during mastication of white bread.

The oral breakdown, sensory properties, and volatile release during mastication of white bread were investigated. The results of correlation analysis for white bread's physical properties and it's oral physiological parameters during chewing have elucidated that bread's physical properties determined the oral processing behavior. During chewing of white bread, 15 dominant ions with regularly changing patterns were monitored by proton transfer reaction-mass spectrometry (PTR-MS). These dominant ions derived from 32 volatile compounds were further confirmed by pure standards. Partial least squares regression (PLSR) analysis was used to explore the positive correlations between the sensory analysis and the dominant aroma compounds. Results have shown that 9 aroma compounds were predicted as the potent odorants contributing to the changes in aroma profiles. Finally, 3-hydroxy-2-butanone, 2-methyl-1-propanol, and heptanoic acid were confirmed as the key aroma compounds contributing to the changes in aroma profiles of white bread before and after chewing.

Fate of 6:2 fluorotelomer sulfonic acid in pumpkin (Cucurbita maxima L.) based on hydroponic culture: Uptake, translocation and biotransformation.

6:2 fluorotelomer sulfonic acid (6:2 FTSA) is currently used as an alternative to perfluorooctanesulfonate (PFOS) and is widely detected in the environment. The uptake, translocation and biotransformation of 6:2 FTSA in pumpkin (Cucurbita maxima L.) were investigated by hydroponic exposure for the first time. The root concentration factor (RCF) of 6:2 FTSA was 2.6-24.2 times as high as those of perfluoroalkyl acids (PFAAs) of the same or much shorter carbon chain length, demonstrating much higher bioaccumulative ability of 6:2 FTSA in pumpkin roots. The translocation capability of 6:2 FTSA from root to shoot depended on its hydrophobicity. Six terminal perfluorocarboxylic acid (PFCA) metabolites, including perfluoroheptanoic acid (PFHpA), perfluorohexanoic acid (PFHxA), perfluoropentanoic acid (PFPeA), perfluorobutanoic acid (PFBA), perfluoropropionic acid (PFPrA) and trifluoroacetic acid (TFA) were found in pumpkin roots and shoots. PFHpA was the primary metabolite in roots, while PFBA was the major product in shoots. 1-aminobenzotriazole (ABT), a cytochromes P450 (CYPs) suicide inhibitor, could decrease the concentrations of PFCA products with dose-dependent relationships in pumpkin tissues, implying the role of CYP enzymes involved in plant biotransformation of 6:2 FTSA. This study indicated that the application of 6:2 FTSA can lead to the occurrence of PFCAs (C2-C7) in plants.

Occurrences, levels and risk assessment studies of emerging pollutants (pharmaceuticals, perfluoroalkyl and endocrine disrupting compounds) in fish samples from Kalk Bay harbour, South Africa.

A comprehensive analysis of 15 target chemical compounds (pharmaceuticals and personal care product, perfluoroalkyl compounds and industrial chemicals) were carried out to determine their concentrations in selected commercially exploited, wild caught small and medium sized pelagic fish species and their organs (Thyrsites atun (snoek), Sarda orientalis (bonito), Pachymetopon blochii (panga) and Pterogymnus laniarius (hottentot)) obtained from Kalk Bay harbour, Cape Town. Solid phase extraction (SPE) method based on Oasis HLB cartridges were used to concentrate and clean-up the samples. Liquid chromatography-mass spectrometry analysis of these chemical compounds revealed the simultaneous presence of at least 12 compounds in different parts of the selected fish species in nanogram-per-gram dry weight (ng/g dw) concentrations. The results revealed that perfluorodecanoic acid, perfluorononanoic acid and perfluoroheptanoic acid were the most predominant among the perfluorinated compounds and ranged between: (20.13-179.2 ng/g), (21.22-114.0 ng/g) and (40.06-138.3 ng/g). Also, diclofenac had the highest concentration in these edible fish species out of all the pharmaceuticals detected (range: 551.8-1812 ng/g). The risk assessment values were above 0.5 and 1.0 for acute and chronic risk respectively which shows that these chemicals have a high health risk to the pelagic fish, aquatic organisms and to humans who consume them. Therefore, there is an urgent need for a precautionary approach and the adequate regulation of the use and disposal of synthetic chemicals that persist in aquatic/marine environment in this province and other parts of South Africa, to prevent impacts on the sustainability of our marine environment, livelihood and lives.

Accumulation of perfluoroalkyl substances in lysimeter-grown rice in Japan using tap water and simulated contaminated water.

Perfluoroalkyl substances (PFASs) are a group of contaminants of concern in agricultural crops, but little is known of their accumulation or behavior in grains. We grew Japanese rice (Oryza sativa subsp. indica) in lysimeters irrigated with tap water or tap water plus simulated contaminated water for 2 years, then analyzed the roots, straw, unhulled rice, white rice, bran, soil, and water for PFASs residues. Total fluorine was measured by combustion ion chromatography. Estimated per-plant residue levels were 3.0 pg perfluorooctanesulfonic acid (PFOS) (bran: 0.5%, hull: 99.5%), 0.54 pg N-ethylperfluorooctanesulfonamide (N-EtFOSA) (white rice: 67%, hull: 33%), 1.2 pg perfluorobutanoic acid (PFBA) (white rice: 13%, bran: 7%, hull: 79%), 0.68 pg perfluoropentanoic acid (hull: 100%), 0.50 pg perfluorohexanoic acid (PFHxA) (white rice: 65%, bran: 16%, hull: 19%), 0.21 pg perfluoroheptanoic acid (hull: 100%), 0.25 pg perfluorooctanoic acid (PFOA) (hull: 100%), and 0.12 pg perfluorodecanoic acid (PFNA) (white rice: 81%, bran: 19%). Estimated daily PFASs intakes were <1-3 ng perfluorooctanesulfonamide, <1-7 ng N-EtFOSA, 1-2 ng PFBA, <3-4 ng PFHxA, and 1-2 ng PFNA. Estimated PFOS, PFOA, and total PFASs in straw feed were 0.4, 0.1, and 2 kg yr-1 and 0.7, 0.4, and 8 kg yr-1 in 2015 and 2016, respectively. Estimated PFOS, PFOA, and total PFASs in straw fertilizer were 4, 1, and 23 kg yr-1 and 7, 4, and 86 kg yr-1 in 2015 and 2016, respectively. PFASs accumulation may cause longer residence time in agricultural systems owing to straw being used as animal feed and organic fertilizer.

Spatial Distribution of Perfluorinated Compounds in Atmosphere of the Pearl River Delta, China.

Perfluorinated compounds (PFCs) are of special concern due to their environmental persistence and biotoxicity. In the present study, spatial distribution of PFCs in atmosphere of the Pearl River Delta (PRD) of Southern China was investigated from November 2013 to January 2014. Forty-two air samples were collected using passive air samplers to determine the 13 target analytes, including perfluoroalkyl carboxylic acids (PFCAs, C5-14) and perfluoroalkyl sulfonic acids (PFSAs, C4, C6, and C8). Results showed that the total concentrations of PFCs (ΣPFCs) ranged from 53.7 to 225 pg m-3 with an average level of 122 ± 41.5 pg m-3, indicating a wide variation on ΣPFCs in atmosphere of the PRD. Perfluorooctane sulfonate (PFOS) was the most abundant PFCs, followed by perfluorooctanoic acid (PFOA), perfluoropentanoic acid (PFPeA), and perfluoroheptanoic acid (PFHpA). PFOS, PFOA, PFPeA, and PFHpA accounted for 26%, 22%, 21%, and 19% of ΣPFCs, respectively. A general decline in ΣPFCs was observed in the atmosphere from south PRD to north PRD. It was likely related to the industrial distribution, population density, and wind direction. In addition, the same order of magnitude of PFOS and lower level of PFOA were observed in this study compared with those in atmosphere sampled in other regions. The lifetime risk indexes on the PFOS and PFOA concentrations were much less than unity, suggesting a lower nononcogenic risk to residents in the PRD.

Per- and polyfluoroalkyl substances and fluorine mass balance in cosmetic products from the Swedish market: implications for environmental emissions and human exposure.

Per- and polyfluoroalkyl substances (PFASs) are a diverse class of >4700 chemicals used in commercial products and industrial processes. Concerns surrounding PFASs are principally due to their widespread occurrence in humans and the environment and links to adverse health effects. One of the lesser known uses for PFASs is in cosmetic products (CPs) which come into contact with the skin (e.g. hair products, powders, sunblocks, etc.). In the present work, thirty-one CPs from five product categories (cream, foundation, pencil, powder and shaving foam) were analyzed for 39 PFASs by liquid chromatography-tandem mass spectrometry, as well as extractable organic fluorine (EOF) and total fluorine (TF) by combustion ion chromatography (CIC). This multi-platform approach enabled determination of the fraction of fluorine accounted for by known PFASs (i.e. fluorine mass balance). Foundations and powders contained 25 different PFASs with the most frequently detected being perfluorinated carboxylic acids (perfluoroheptanoic acid and perfluorohexanoic acid) and polyfluoroalkyl phosphate esters (PAPs). Σ14PAP concentrations up to 470 µg g-1 were measured in products listing mixtures of PAPs as an ingredient. For all samples, Σ39PFAS concentrations only explained a small fraction of the EOF and TF, pointing to the presence of unknown organic and/or inorganic fluorinated substances, including polymers. While creams, pencil and shaving foams did not contain measurable concentrations of any of the 39 PFASs targeted here, CIC revealed high to moderate TF content. Overall, these data highlight the need for further investigations into the occurrence of PFASs in CPs and their importance with regards to human and environmental exposure.

Peak AAA fatty acid homolog contaminants present in the dietary supplement l-Tryptophan associated with the onset of eosinophilia-myalgia syndrome.

The eosinophilia-myalgia syndrome (EMS) outbreak that occurred in the USA and elsewhere in 1989 was caused by the ingestion of Showa Denko K.K. (SD) L-tryptophan (L-Trp). "Six compounds" detected in the L-Trp were reported as case-associated contaminants. Recently the final and most statistically significant contaminant, "Peak AAA" was structurally characterized. The "compound" was actually shown to be two structural isomers resulting from condensation reactions of L-Trp with fatty acids derived from the bacterial cell membrane. They were identified as the indole C-2 anteiso (AAA1-343) and linear (AAA2-343) aliphatic chain isomers. Based on those findings, we utilized a combination of on-line HPLC-electrospray ionization mass spectrometry (LC-MS), as well as both precursor and product ion tandem mass spectrometry (MS/MS) to facilitate identification of a homologous family of condensation products related to AAA1-343 and AAA2-343. We structurally characterized eight new AAA1-XXX/AAA2-XXX contaminants, where XXX represents the integer molecular ions of all the related homologs, differing by aliphatic chain length and isomer configuration. The contaminants were derived from the following fatty acids of the bacterial cell membrane, 5-methylheptanoic acid (anteiso-C8:0) for AAA1-315; n-octanoic acid (n-C8:0) for AAA2-315; 6-methyloctanoic acid (anteiso-C9:0) for AAA1-329; n-nonanoic acid (n-C9:0) for AAA2-329; 10-methyldodecanoic acid (anteiso-C13:0) for AAA1-385; n-tridecanoic acid (n-C13:0) for AAA2-385; 11-methyltridecanoic acid (anteiso-C14:0) for AAA1-399; and n-tetradecanoic acid (n-C14:0) for AAA2-399. The concentration levels for these contaminants were estimated to be 0.1-7.9 µg / 500 mg of an individual SD L-Trp tablet or capsule The structural similarity of these homologs to case-related contaminants of Spanish Toxic Oil Syndrome (TOS) is discussed.

GC-MS Analysis of Short-Chain Fatty Acids in Feces, Cecum Content, and Blood Samples.

Short-chain fatty acids, the end products of fermentation of dietary fibers by the gut microbiota, have been shown to exert multiple effects on mammalian metabolism. For the analysis of short-chain fatty acids, gas chromatography-mass spectrometry is a very powerful and reliable method. Here, we describe a fast, reliable, and reproducible method for the separation and quantification of short-chain fatty acids in mouse feces, cecum content, and blood samples (i.e., plasma or serum) using gas chromatography-mass spectrometry. The short-chain fatty acids analyzed include acetic acid, propionic acid, butyric acid, valeric acid, hexanoic acid, and heptanoic acid.

Atmospheric chlorinated polyfluorinated ether sulfonate and ionic perfluoroalkyl acids in 2006 to 2014 in Dalian, China.

Chlorinated polyfluorinated ether sulfonate (Cl-PFESA; trade name F-53B) is an alternative product for perfluorooctane sulfonate (PFOS) used in metal plating; little is known about its levels in the environment and its risks. To our knowledge, the present study constitutes the first report of Cl-PFESA in the atmosphere. In 2006 to 2014, C8 Cl-PFESA, along with ionic perfluoroalkyl acids (PFAAs), was detected in atmospheric particulate matter in Dalian, China. Concentrations of C8 Cl-PFESA increased from 140 pg/m3 in 2007 to 722 pg/m3 in 2014. Levels of 11 (total) ionic PFAAs increased in 2006 to 2008 and decreased afterward, with a range of 35.7 to 860 pg/m3 . The PFAAs in the particulate matter were dominated by perfluorocarboxylates, with perfluorooctanoate detected at the highest concentration at a mean level of 71.7 pg/m3 , followed by perfluoroheptanoate and perfluorohexanoate. Perfluorosulfonates were detected at lower levels, with mean concentrations of PFOS, perfluorobutanesulfonate, and perfluorohexane sulfonate of 5.73, 1.64, and 1.24 pg/m3 , respectively. Back-trajectory analysis suggested that the air mass approaching Dalian during the sampling originated from the northwest, where fluorochemical industry parks and metal plating industries are densely located. No significant correlation was observed between Cl-PFESA and the ionic PFAAs. The relatively high Cl-PFESA concentrations suggested that it possibly contributed largely to the previously reported exposure to undefined organic fluorine compounds, for which further research on emission and environmental risks is needed. Environ Toxicol Chem 2017;36:2581-2586. © 2017 SETAC.

Detection of Ganoderic Acid A in Ganoderma lingzhi by an Indirect Competitive Enzyme-Linked Immunosorbent Assay.

Ganoderma is a genus of medicinal mushroom traditionally used for treating various diseases. Ganoderic acid A is one of the major bioactive Ganoderma triterpenoids isolated from Ganoderma species. Herein, we produced a highly specific monoclonal antibody against ganoderic acid A (MAb 12 A) and developed an indirect competitive ELISA for the highly sensitive detection of ganoderic acid A in Ganoderma lingzhi, with a limit of detection of 6.10 ng/mL. Several validation analyses support the accuracy and reliability of the developed indirect competitive ELISA for use in the quality control of Ganoderma based on ganoderic acid A content. Furthermore, quantitative analysis of ganoderic acid A in G. lingzhi revealed that the pileus exhibits the highest ganoderic acid A content compared with the stipe and spore of the fruiting body; the best extraction efficiency was found when 50 % ethanol was used, which suggests the use of a strong liquor to completely harness the potential of Ganoderma triterpenoids in daily life.

Characteristic fingerprinting based on macamides for discrimination of maca (Lepidium meyenii) by LC/MS/MS and multivariate statistical analysis.

BACKGROUND: Macamides with a benzylalkylamide nucleus are characteristic and major bioactive compounds in the functional food maca (Lepidium meyenii Walp). The aim of this study was to explore variations in macamide content among maca from China and Peru. Twenty-seven batches of maca hypocotyls with different phenotypes, sampled from different geographical origins, were extracted and profiled by liquid chromatography with ultraviolet detection/tandem mass spectrometry (LC-UV/MS/MS). RESULTS: Twelve macamides were identified by MS operated in multiple scanning modes. Similarity analysis showed that maca samples differed significantly in their macamide fingerprinting. Partial least squares discriminant analysis (PLS-DA) was used to differentiate samples according to their geographical origin and to identify the most relevant variables in the classification model. The prediction accuracy for raw maca was 91% and five macamides were selected and considered as chemical markers for sample classification. CONCLUSION: When combined with a PLS-DA model, characteristic fingerprinting based on macamides could be recommended for labelling for the authentication of maca from different geographical origins. The results provided potential evidence for the relationships between environmental or other factors and distribution of macamides. © 2016 Society of Chemical Industry.

RP-HPLC ANALYSIS OF ACIDIC AND BASIC DRUGS IN SYSTEMS WITH DIETHYLAMINE AS ELUENTS ADDITIVE.

The chromatographic behavior of some basic and acidic drugs was studied on Cl 8, Phenyl-Hexyl and Polar RP columns with methanol or acetonitrile as organic modifiers of aqueous mobile phases containing addition of diethylamine. Diethylamine plays a double function of silanol blocker reagent in analysis of basic drugs and ion-pair reagent in analysis of acidic drugs. Most symmetrical peaks and highest system efficiency were obtained on Phenyl-Hexyl and Polar RP columns in tested mobile phase systems compared to results obtained on C18 column. A new rapid, simple, specific and accurate reverse phase liquid chromatographic method was developed for the simultaneous determination of atorvastatin - antihyperlipidemic drug and amlodipine - calcium channel blocker in one pharmaceutical formulation. Atorvastatin is an acidic compounds while amlodipine is a basic substance. The chromatographic separation was carried out on Phenyl-Hexyl column by gradient elution mode with acetonitrile as organic modifier, acetate buffer at pH 3.5 and Q.025 M/L diethylamine. The proposed method was validated for specificity, precision, accuracy, linearity, and robustness. The linearity range of atorvastatin and amlodipine for 5 - 100 µg/mL was obtained with limits of-detection (LOD) 3.2750 gg/mL and 3.2102 µg/mL, respectively. The proposed method made use of DAD as a tool for peak identity and purity confirmation.

Possibilities of retention modeling and computer assisted method development in supercritical fluid chromatography.

The multi-modal retention mechanism in supercritical fluid chromatography (SFC) results in a non-linear dependency of log(k) on the fraction of organic solvent φ and log(φ). In the present study, the possibility of retention modeling for method development purposes in SFC was investigated, considering several non-linear isocratic relationships. Therefore, both isocratic and gradient runs were performed, involving different column chemistries and analytes possessing diverse physico-chemical properties. The isocratic retention data of these compounds could be described accurately using the non-linear retention models typically used in HILIC and reversed-phase LC. The interconversion between isocratic and gradient retention data was found to be less straightforward than in RPLC and HILIC because of pressure effects. The possibility of gradient predictions using gradient scouting runs to estimate the retention parameters was investigated as well, showing that predictions for other gradients with the same starting conditions were acceptable (always below 5%), whereas prediction errors for gradients with a different starting condition were found to be highly dependent on the compound. The second part of the study consisted of the gradient optimization of two pharmaceutical mixtures (one involving atorvastatin and four related impurities, and one involving a 16 components mixture including eight drugs and their main phase I metabolites). This could be done via individual retention modeling based on gradient scouting runs. The best linear gradient was found via a grid search and the best multi-segment gradient via the previously published one-segment-per-component search. The latter improved the resolution between the critical pairs for both mixtures, while still giving accurate prediction errors (using the same starting concentrations as the gradient scouting runs used to build the model). The optimized separations were found in less than 3 h and 8 h of analysis time (including equilibration times), respectively.

Green analytical method development for statin analysis.

Green analytical chemistry method was developed for pravastatin, fluvastatin and atorvastatin analysis. HPLC/DAD method using ethanol-based mobile phase with octadecyl-grafted silica with various grafting and related-column parameters such as particle sizes, core-shell and monolith was studied. Retention, efficiency and detector linearity were optimized. Even for column with particle size under 2 µm, the benefit of keeping efficiency within a large range of flow rate was not obtained with ethanol based mobile phase compared to acetonitrile one. Therefore the strategy to shorten analysis by increasing the flow rate induced decrease of efficiency with ethanol based mobile phase. An ODS-AQ YMC column, 50 mm × 4.6 mm, 3 µm was selected which showed the best compromise between analysis time, statin separation, and efficiency. HPLC conditions were at 1 mL/min, ethanol/formic acid (pH 2.5, 25 mM) (50:50, v/v) and thermostated at 40°C. To reduce solvent consumption for sample preparation, 0.5mg/mL concentration of each statin was found the highest which respected detector linearity. These conditions were validated for each statin for content determination in high concentrated hydro-alcoholic solutions. Solubility higher than 100mg/mL was found for pravastatin and fluvastatin, whereas for atorvastatin calcium salt the maximum concentration was 2mg/mL for hydro-alcoholic binary mixtures between 35% and 55% of ethanol in water. Using atorvastatin instead of its calcium salt, solubility was improved. Highly concentrated solution of statins offered potential fluid for per Buccal Per-Mucous(®) administration with the advantages of rapid and easy passage of drugs.

Characteristic odor components of volatile oil from the cultivation medium of Lactobacillus acidophilus.

Volatile oils obtained from both the liquid medium after incubation (MAI) and liquid medium before incubation (MBI) in the cultivation process of Lactobacillus acidophilus were isolated by hydrodistillation (HD) and analyzed to investigate the utility of the liquid waste. The composition of the volatile oils was analyzed by capillary gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). In total, 46 and 19 compounds were detected in the volatile oils from MAI (MAI oil) and MBI (MBI oil), respectively. The principle components of MAI oil were fatty acids, including pentanoic acid (12.75%), heptanoic acid (14.05%), and nonanoic acid (14.04%). The important aroma-active compounds in the oils were detected by GC-MS/Olfactometry (GC-O), and their intensity of aroma were measured by aroma extraction dilution analysis (AEDA). Pyrazines were determined as key aroma components; in particular, 2-ethyl-5-methylpyrazine was the most primary aroma-active compound in MAI oil. In addition, as the characteristic aroma-active compounds, 3-(methylthio)-propanal, trimethylpyrazine, and pentanoic acid were also detected in MAI oil. These results imply that the waste medium after incubation of L. acidophilus may be utilized as a source of volatile oils.

Simultaneous determination of atorvastatin calcium and olmesartan medoxomil in a pharmaceutical formulation by reversed phase high-performance liquid chromatography, high-performance thin-layer chromatography, and UV spectrophotometric methods.

Validated RP-HPLC, HPTLC, and UV spectrophotometric methods have been developed for the simultaneous determination of atorvastatin calcium (ATV) and olmesartan medoxomil (OLM) in a pharmaceutical formulation. The RP-HPLC separation was achieved on a Kromasil C18 column (250 x 4.6 mm, 5 microm particle size) using 0.01 M potassium dihydrogen o-phosphate (pH 4 adjusted with o-phosphoric acid)-acetonitrile (50 + 50, v/v) as the mobile phase at a flow rate of 1.5 mL/min. Quantification was achieved by UV detection at 276 nm. The HPTLC separation was achieved on precoated silica gel 60F254 plates using chloroform-methanol-acetonitrile (4 + 2+ 4, v/v/v) mobile phase. Quantification was achieved with UV detection at 276 nm. The UV-Vis spectrophotometric method was based on the simultaneous equation method that involves measurement of absorbance at two wavelengths, i.e., 255 nm (lambda max of OLM) and 246.2 nm (lambda max of ATV) in methanol. All three methods were validated as per International Conference on Harmonization guidelines. The proposed methods were simple, precise, accurate, and applicable for the simultaneous determination of ATV and OLM in a marketed formulation. The results obtained by applying the proposed methods were statistically analyzed and were found satisfactory.

Hollow-fiber-supported liquid membrane microextraction of amlodipine and atorvastatin.

A simple, environmentally friendly, and efficient method, based on hollow-fiber-supported liquid membrane microextraction, followed by high-performance liquid chromatography has been developed for the extraction and determination of amlodipine (AML) and atorvastatin (ATO) in water and urine samples. The AML in two-phase hollow-fiber liquid microextraction is extracted from 24.0 mL of the aqueous sample into an organic phase with microliter volume located inside the pores and lumen of a polypropylene hollow fiber as acceptor phase, but the ATO in three-phase hollow-fiber liquid microextraction is extracted from aqueous donor phase to organic phase and then back-extracted to the aqueous acceptor phase, which can be directly injected into the high-performance liquid chromatograph for analysis. The preconcentration factors in a range of 34-135 were obtained under the optimum conditions. The calibration curves were linear (R(2) ≥ 0.990) in the concentration range of 2.0-200 µg/L for AML and 5.0-200 µg/L for ATO. The limits of detection for AML and ATO were 0.5 and 2.0 µg/L, respectively. Tap water and human urine samples were successfully analyzed for the existence of AML and ATO using the proposed methods.

Comparative study of three modified numerical spectrophotometric methods: an application on pharmaceutical ternary mixture of aspirin, atorvastatin and clopedogrel.

Three novel numerical methods were developed for the spectrophotometric multi-component analysis of capsules and synthetic mixtures of aspirin, atorvastatin and clopedogrel without any chemical separation. The subtraction method is based on the relationship between the difference in absorbance at four wavelengths and corresponding concentration of analyte. In this method, the linear determination ranges were 0.8-40 µg mL(-1) aspirin, 0.8-30 µg mL(-1) atorvastatin and 0.5-30 µg mL(-1) clopedogrel. In the quotient method, 0.8-40 µg mL(-1) aspirin, 0.8-30 µg mL(-1) atorvastatin and 1.0-30 µg mL(-1) clopedogrel were determine from spectral data at the wavelength pairs that show the same ratio of absorbance for other two species. Standard addition method was used for resolving ternary mixture of 1.0-40 µg mL(-1) aspirin, 0.8-30 µg mL(-1) atorvastatin and 2.0-30 µg mL(-1) clopedogrel. The proposed methods were validated. The reproducibility and repeatability were found satisfactory which evidence was by low values of relative standard deviation (<2%). Recovery was found to be in the range (99.6-100.8%). By adopting these methods, the time taken for analysis was reduced as these methods involve very limited steps. The developed methods were applied for simultaneous analysis of aspirin, atorvastatin and clopedogrel in capsule dosage forms and results were in good concordance with alternative liquid chromatography.

Differential pulse adsorptive stripping voltammetric determination of nanomolar levels of atorvastatin calcium in pharmaceutical and biological samples using a vertically aligned carbon nanotube/graphene oxide electrode.

A novel vertically aligned carbon nanotube/graphene oxide (VACNT-GO) electrode is proposed, and its ability to determine atorvastatin calcium (ATOR) in pharmaceutical and biological samples by differential pulse adsorptive stripping voltammetry (DPAdSV) is evaluated. VACNT films were prepared on a Ti substrate by a microwave plasma chemical vapour deposition method and then treated with oxygen plasma to produce the VACNT-GO electrode. The oxygen plasma treatment exfoliates the carbon nanotube tips exposing graphene foils and inserting oxygen functional groups, these effects improved the VACNT wettability (super-hydrophobic) which is crucial for its electrochemical application. The electrochemical behaviour of ATOR on the VACNT-GO electrode was studied by cyclic voltammetry, which showed that it underwent an irreversible oxidation process at a potential of +1.08 V in pHcond 2.0 (0.2 mol L(-1) buffer phosphate solution). By applying DPAdSV under optimized experimental conditions the analytical curve was found to be linear in the ATOR concentration range of 90 to 3.81 × 10(3) nmol L(-1) with a limit of detection of 9.4 nmol L(-1). The proposed DPAdSV method was successfully applied in the determination of ATOR in pharmaceutical and biological samples, and the results were in close agreement with those obtained by a comparative spectrophotometric method at a confidence level of 95%.