RESUMEN
RATIONALE: Ethylene oxide (EO) sterilization is commonly employed for the sterilization of medical devices and has a very high market share. However, EO and its metabolite ethylene chlorohydrin (ECH) are toxic to humans. In compliance with the classification and residue limits of medical devices defined by ISO 10993-7, our study established two extraction methods for the testing of EO and ECH. METHODS: The first method involves simulated-use extraction using water as the extraction solvent. While the second, exhaustive extraction, directly extracts sample through headspace sampling analysis. Gas chromatography-tandem mass spectrometry in multiple reaction monitoring mode was utilized, requiring only 16 min. Then, the developed method was applied to assess 10 commercially available medical devices sterilized by EO. RESULTS: In simulated-use extraction, calibration curves were evaluated in the range of 1-100 and 5-500 µg for EO and ECH, respectively (r > 0.999). Inter-day recoveries ranged from 85.0% to 95.2% and from 94.8% to 102.4%. In exhaustive extraction, calibration curves spanned 0.5-50 and 2-200 µg for EO and ECH, respectively (r > 0.999). Inter-day recoveries ranged from 101.6% to 102.1% for EO and from 98.1% to 102.2% for ECH. After analysis of the 10 commercially available medical devices, two cotton swabs were found to have ECH of 35.1 and 28.4 µg per device, and four medical devices were found to have EO with concentration below the limit of quantification. Meanwhile, we found that the EO internal standard (propylene oxide) recommended by ISO 10993-7 had interference problems with other similar substances and was not suitable as an internal standard for EO. CONCLUSIONS: This study offers a sensitive and straightforward analytical approach to EO and ECH residues in a variety of medical devices. In addition, the results show that the EO or ECH content of these types of medical devices in our study falls below the regulatory limits, therefore instilling confidence among consumers regarding their safe use.
Asunto(s)
Óxido de Etileno , Cromatografía de Gases y Espectrometría de Masas , Espectrometría de Masas en Tándem , Óxido de Etileno/análisis , Óxido de Etileno/química , Espectrometría de Masas en Tándem/métodos , Cromatografía de Gases y Espectrometría de Masas/métodos , Equipos y Suministros , Límite de Detección , Etilenos/análisis , Etilenos/química , Reproducibilidad de los Resultados , Contaminación de Equipos , Esterilización/métodosRESUMEN
A "one-step" strategy has been demonstrated for the tunable synthesis of multifunctional aliphatic polycarbonates (APCs) with ethylene oxide (EO), ethylene carbonate (EC), and cyclohexene oxide (CHO) side groups by the copolymerization of 4-vinyl-1-cyclohexene diepoxide with carbon dioxide under an aminotriphenolate iron/PPNBz (PPN = bis(triphenylphosphine)-iminium, Bz = benzoate) binary catalyst. By adjusting the PPNBz-to-iron complex ratio and incorporating auxiliary solvents, the content of functional side groups can be tuned within the ranges of 53-75% for EO, 18-47% for EC, and <1-7% for CHO. The yield and molecular weight distribution of the resulting multifunctional APCs are affected by the viscosity of the polymerization system. The use of tetrahydrofuran as an auxiliary solvent enables the preparation of narrow-distribution polycarbonates at high conversion. This work presents a novel perspective for the preparation of tailorable multifunctional APCs.
Asunto(s)
Dióxido de Carbono , Cemento de Policarboxilato , Polimerizacion , Dióxido de Carbono/química , Cemento de Policarboxilato/química , Compuestos Epoxi/química , Óxido de Etileno/química , Ciclohexenos/química , Catálisis , Viscosidad , DioxolanosRESUMEN
Biodegradable shape memory polymers provide unique regenerative medicine approaches in minimally invasive surgeries. Once heated, thermally responsive shape memory polymer devices can be compressed, programmed to fit within a small profile, delivered in the cold programmed state, and expanded when heated to body temperature. We have previously developed a biodegradable shape memory elastomer (SME), poly(glycerol dodecanedioate) (PGD), with transition temperatures near 37°C exhibiting nonlinear elastic properties like numerous soft tissues. Using SMEs in the clinic requires disinfection and sterilization methods that conserve physiochemical, thermomechanical, and shape recovery properties. We evaluated disinfection protocols using 70% ethanol and UV254 nm for research applications and ethylene oxide (EtO) gas sterilization for clinical applications. Samples disinfected with ethanol for 0.5 and 1 min showed no changes in physiochemical material properties, but after 15 min showed slower recovery rates than controls (p < .05). EtO sterilization at 54.4°C decreased transition temperatures and shape recovery rate compared to EtO sterilization at 37.8°C (p < .01) and controls (p < .05). Aging samples for 9 months in a vacuum desiccator significantly reduced shape recovery, and the recovery rate in EtO sterilized samples compared to controls (p < .001). Cytotoxicity testing (ISO-10993.5C:2012) revealed media extractions from EtO sterilized samples, sterilized at 37.8°C, and high-density polyethylene negative control samples exhibit lower cytotoxicity (IC50) than Ethanol 1 min, UV 2 h, and EtO 54.4°C. Cell viability of NIH3T3 fibroblasts on sterilized surfaces was equivalent on EtO 37.7°C, EtO 54.4°C and Ethanol sterilized substrates. Finally, chromogenic bacterial endotoxin testing showed endotoxin levels were below the FDA prescribed levels for devices contacting blood and lymphatic tissues for ethanol 1 min, UV 120 min, EtO 37.7°C, EtO 54.4°C. These findings outline various disinfection and sterilization processes for research and pre-clinical application and provide a pathway for developing custom sterilization cycles for the translation of biomedical devices utilizing PGD shape memory polymers.
Asunto(s)
Elastómeros , Glicerol , Animales , Ratones , Elastómeros/farmacología , Glicerol/farmacología , Células 3T3 NIH , Esterilización/métodos , Desinfección , Etanol , Óxido de Etileno/farmacología , Óxido de Etileno/químicaRESUMEN
Reactions of oxirane ring opening provide a powerful tool for regio- and stereoselective synthesis of polyfunctional and heterocyclic compounds, widely used in organic chemistry and drug design. Cyclooctane, alongside other medium-sized rings, is of interest as a novel molecular platform for the construction of target-oriented leads. Additionally, cyclooctane derivatives are well known to be prone to transannular reactions, which makes them a promising object in the search for novel approaches to polycyclic structures. In the present work, a series of cyclooctanediones was studied in Corey-Chaykovsky reactions, and novel spirocyclic bis(oxiranes) containing cyclooctane core, namely, 1,5-dioxadispiro[2.0.2.6]dodecane and 1,8-dioxadispiro[2.3.2.3]dodecane, were synthesized. Ring opening of the obtained bis(oxiranes) upon treatment with sodium azide was investigated, and it was found that the reaction path is determined by the reciprocal orientation of oxygen atoms in the oxirane moieties. Diastereomers of the bis(oxiranes) with cis-orientation underwent independent ring opening, supplying corresponding diazidodiols, while in the case of stereoisomers with trans-orientation, domino-like reactions occurred, including intramolecular nucleophilic attack and the formation of a novel three- or six-membered O-containing ring. Summarily, a straightforward approach to polyfunctional compounds containing cyclooctane or oxabicyclo[3.3.1]nonane cores, employing bis(oxiranes), was elaborated.
Asunto(s)
Compuestos Epoxi , Óxido de Etileno , Óxido de Etileno/química , Compuestos Epoxi/química , Azida Sódica , Ciclooctanos , OxígenoRESUMEN
Ensuring the sterility of life science products plays a pivotal role in the healthcare sector. Gamma irradiation and ethylene oxide sterilization are two commonly applied methods for the sterilization of medical devices, packaging components and Active Pharmaceutical Ingredients (API) for medicinal products. Focussed studies on the effects of sterilization processes on APIs remain limited. In this research study, five APIs, frequently used in sterile ophthalmic preparations were subjected to both gamma irradiation and ethylene oxide under different process conditions. The following APIs of GMP quality were selected: dexamethasone, aciclovir, tetracycline hydrochloride, triamcinolone and methylprednisolone. Analyses were performed using High Performance Liquid Chromatography equipped with UV detection and the effect of sterilization conditions on the APIs was evaluated by the assay and related substances test prescribed by the European Pharmacopoeia (Ph. Eur.). It was concluded that exposure to ethylene oxide resulted in compliance with Ph. Eur. for all APIs. While dexamethasone and methylprednisolone did not meet the requirement for the Ph. Eur. after exposure to gamma irradiation, the other three APIs did meet the requirement under the specified irradiation conditions. Subsequent optimization of sterilization parameters positively influenced the compliance to the Ph. Eur. requirements.
Asunto(s)
Óxido de Etileno , Esterilización , Dexametasona , Óxido de Etileno/química , Rayos gamma , Metilprednisolona , Preparaciones Farmacéuticas , Esterilización/métodosRESUMEN
The 'ethylene glycol ethers' (EGE) are a broad family of solvents and hydraulic fluids produced through the reaction of ethylene oxide and a monoalcohol. Certain EGE derived from methanol and ethanol are well known to cause toxicity to the testes and fetotoxicity and that this is caused by the common metabolites methoxy and ethoxyacetic acid, respectively. There have been numerous published claims that EGE fall into the category of 'endocrine disruptors' often without substantiated evidence. This review systematically evaluates all of the available and relevant in vitro and in vivo data across this family of substances using an approach based around the EFSA/ECHA 2018 guidance for the identification of endocrine disruptors. The conclusion reached is that there is no significant evidence to show that EGE target any endocrine organs or perturb endocrine pathways and that any toxicity that is seen occurs by non-endocrine modes of action.
Asunto(s)
Éteres de Etila/química , Éteres de Etila/farmacología , Óxido de Etileno/química , Óxido de Etileno/farmacología , Animales , Relación Dosis-Respuesta a Droga , Glándulas Endocrinas/efectos de los fármacos , Ambiente , Éteres de Etila/farmacocinética , Óxido de Etileno/farmacocinética , Hormonas Esteroides Gonadales/metabolismo , Humanos , Receptores de Estrógenos/efectos de los fármacos , Absorción Cutánea/fisiologíaRESUMEN
Recyclable aqueous two-phase systems with thermo-responsive phase-forming materials have been employed to separate macromolecules; however, these systems have achieved very limited separation efficiency for small molecules, such as antibiotics. In this study, aqueous two-phase systems composed of the ethylene oxide/propylene oxide copolymer and water were developed to extract alkaline antibiotics from the fermentation broth. In the aqueous two-phase systems with an ethylene oxide ratio of 20 and propylene oxide ratio of 80, the partition coefficients of tylosin and spiramycin reached 16.87 and 20.39, respectively, while the extraction recoveries were 70.67 and 86.70%, respectively. Coupled with mechanism analysis, we demonstrated the feasibility of extracting alkaline antibiotics using this aqueous two-phase system, especially for 16-membered macrolide antibiotics. The molecular dynamic simulation was employed to visualize the process of dual-phase formation and the partition behavior of antibiotics in an aqueous two-phase system. The dynamic simulation revealed the binding energy between the antibiotic and ethylene oxide/propylene oxide copolymers, which provides a simple indicator for screening suitable antibiotics in aqueous two-phase systems. Our recyclable aqueous two-phase systems provide a robust approach for the extraction of 16-membered macrolide antibiotics with ease of operation and high recovery rates, which is appropriate for large-scale extraction in the fermentation industry.
Asunto(s)
Óxido de Etileno , Espiramicina , Compuestos Epoxi , Óxido de Etileno/química , Fermentación , Polímeros/química , Temperatura , Tilosina , Agua/químicaRESUMEN
Based on the Diels-Alder reaction of vinylchromenes with electron-poor dienophiles, we developed a strategy for the synthesis of tetrahydrocannabinol derivatives. Substituted vinyl chromenes could be converted with several dienophiles to successfully isolate several complex molecules. These molecules already contain the cannabinoid-like base structure and further processing of one such derivative led to a precursor of Δ9 -tetrahydrocannabinol. The most challenging step towards this precursor was an epoxidation step that was ultimately achieved via dimethyl dioxirane.
Asunto(s)
Productos Biológicos/química , Cannabinoides/química , Dronabinol/síntesis química , Benzopiranos/química , Cristalización , Reacción de Cicloadición , Óxido de Etileno/química , Estructura Molecular , Termodinámica , Compuestos de Vinilo/químicaRESUMEN
This study evaluated the performance of a new O3 /H2 O2 mixed gas sterilization instrument for killing microorganisms and inactivating bacterial endotoxin at low temperatures. Sterility assurance level was achieved by an over 6-log reduction of Geobacillus stearothermophilus ATCC 12980, and the decimal reduction value was 0.77 min in sterilization mode. A reduction of over 3 logs in Limulus amebocyte lysate coagulation activity of purified endotoxin from Escherichia coli was observed after treatment in endotoxin-inactivation mode. The same inactivation ability was observed when treating dried bacterial cells. Biomaterials made of polymer or metal did not exhibit cytotoxicity after gas exposure at O3 concentrations below 200 ppm. As the results of human cell-based pyrogen testing, significant amounts of endotoxin that were over the limit for medical devices contacting cerebrospinal fluid (2.15 EU/device) were detected on scissors washed with a washer-disinfector and sterilized with ethylene oxide or autoclaving. In contrast, endotoxin decreased to 0.29 ± 0.05 EU/device after O3 /H2 O2 mixed gas sterilization in endotoxin-inactivation mode. Compared to conventional gas sterilization methods, O3 /H2 O2 mixed gas has high sterilization ability and a strong capacity to inactivate endotoxin. It is expected that this sterilization technology will improve the safety of reusable medical devices and utensils for regenerative medicine.
Asunto(s)
Desinfección , Endotoxinas/química , Óxido de Etileno/química , Peróxido de Hidrógeno/química , Escherichia coli/química , Geobacillus stearothermophilus/química , HumanosRESUMEN
In this work, we treated chitin with 2-(azidomethyl)oxirane and successfully involved the resultant azido chitin derivatives in the ultrasound-assisted Cu(I)-catalyzed azido-alkyne click (CuAAC) reaction with propargylic ester of N,N,N-trimethyl glycine. Thus, we obtained novel water-soluble triazole chitin derivatives. The triazole chitin derivatives and their nanoparticles are characterized by a high in vitro antibacterial activity, which is the same or even higher than that of commercial antibiotics ampicillin and gentamicin. The obtained derivatives are non-toxic. Moreover, the obtained water-soluble polymers are highly efficient green catalysts for the aldol reaction in green solvent water. The catalysts can be easily extracted from the reaction mixture by its precipitation with green solvent ethanol followed by centrifugation and they can be reused at least 10 times.
Asunto(s)
Antibacterianos/química , Quitosano/síntesis química , Quitosano/farmacología , Óxido de Etileno/química , Nanopartículas/química , Triazoles/química , Aldehídos/química , Ampicilina/química , Exoesqueleto , Animales , Antiinfecciosos , Catálisis , Química Clic , Ésteres , Gentamicinas/química , Tecnología Química Verde , Iones , Espectroscopía de Resonancia Magnética , Solubilidad , Solventes , ViscosidadRESUMEN
Electrospun hybrid nanofibers have been extensively regarded as drug carriers. This study tries to introduce a nano fibrous wound dressing as a new strategy for a topical drug-delivery system. The vancomycin (VCM)-loaded hybrid chitosan/poly ethylene oxide (CH/PEO) nanofibers were fabricated by the blend-electrospinning process. Morphological, mechanical, chemical, and biological properties of nanofibers were examined by SEM, FTIR, release profile study, tensile assay, Alamar Blue cytotoxicity evaluation, and antibacterial activity assay. In vivo wound healing activity of hybrid CH/PEO/VCM nanofibers was evaluated in full-thickness skin wounds of rats. The hybrid CH/PEO/VCM nanofibers were successfully fabricated in a nanometer. The CH/PEO/VCM 2.5% had higher Young's Modulus, better tensile strength, smaller fiber diameter with sustained-release profiles compared to CH/PEO/VCM 5%. All nanofibers did not show any significant cytotoxicity (P < 0.05) on the normal fibroblast cells. Also, VCM-load hybrid CH/PEO nanofibers successfully inhibited bacterial growth. The wound area in the rats treated with CH/PEO/VCM 2.5% was less than CH/PEO/VCM 5% treated group. According to histological evaluation, the CH/PEO/VCM 2.5% group showed the fastest wound healing than other treatment groups. Results of this study proposed that CH/PEO/VCM nanofibers could promote the wound healing process by reducing the side effects of VCM as a topical antimicrobial agent.
Asunto(s)
Quitosano/química , Óxido de Etileno/química , Nanofibras/química , Polietilenglicoles/química , Vancomicina/farmacología , Cicatrización de Heridas/efectos de los fármacos , Animales , Antibacterianos/química , Antibacterianos/farmacología , Vendajes , Modelos Animales de Enfermedad , Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos/métodos , Liberación de Fármacos/efectos de los fármacos , Fibroblastos/efectos de los fármacos , Masculino , Ratas , Ratas Wistar , Vancomicina/químicaRESUMEN
The synthesis of poly(ethylene oxide) (PEO) with amino end group, a key functionality for PEGylation, is a long-standing challenge. Multistep routes based on postmodification or covalent protection have been adopted to circumvent ethoxylation of the amino group by ethylene oxide (EO). Here, we report a noncovalent protection strategy for one-step synthesis of PEO amine. An amino (di)alcohol is mixed with a small amount of mild phosphazene base and excess triethylborane (Et3B) before addition of EO. The complexation of the amino group with Et3B guarantees that polymerization of EO occurs selectively from the hydroxyl group through the bicomponent metal-free catalysis. Simply by precipitation in diethyl ether, the protective Et3B as well as the catalyst can be removed to afford α-amino-ω-hydroxyl PEO with controlled molar mass, low dispersity, and complete end functionality. The effect of initiator structure and retention of Et3B on the storage (oxidative) stability of PEO amine is also revealed.
Asunto(s)
Óxido de Etileno , Polietilenglicoles , Aminas , Óxido de Etileno/química , Peso Molecular , PolimerizacionRESUMEN
The objectives of this study were to investigate the effects of processing parameters (relative humidity (RH), temperature, and exposure time) on the ethylene oxide (EtO) microbial inactivation of Salmonella spp. and to evaluate Enterococcus faecium NRRL B2354 as a suitable surrogate for Salmonella inactivation on cumin seeds. Five grams of cumin seeds inoculated with either Salmonella or E. faecium were treated with EtO at different temperatures (46, 53, and 60 °C) and RH (30, 40, and 50%) levels for different exposure time to investigate the effects of process parameters on the microbial inactivation. The Weibull model fit the survival data of both bacteria with a shape parameter p < 1, which showed a tailing effect with concave shape indicating that the sensitive cells were inactivated first, and the sturdy ones survived at low RH treatment conditions. In general, the log reductions of both bacteria on cumin seeds increased with the increasing RH and temperature for EtO treatment. RH is a critical factor for successful EtO inactivation treatment. RH must be higher than 40% to implement a successful and efficient EtO decontamination of cumin seeds. E. faecium consistently showed lower log reductions than those of Salmonella under all EtO treatment conditions investigated in this study, demonstrating that E. faecium is a suitable surrogate for Salmonella. Twenty minutes of EtO treatment at 50% RH achieved ~5 log reductions of both bacteria at all three temperatures. A response surface model was developed to predict the log reductions of both bacteria under different treatment conditions and the contour plots representing log reductions were created. Inactivation is positively correlated to temperature and RH. Therefore, a higher temperature is required to achieve the desired log reduction at lower RH and vice versa. The developed response surface model is a valuable tool for the spice industry in identifying the possible combinations of EtO process parameters (temperature, RH, and exposure time) required to achieve a desired microbial reduction of Salmonella for ensuring microbial food safety of spices.
Asunto(s)
Cuminum/microbiología , Enterococcus faecium/efectos de los fármacos , Óxido de Etileno/química , Óxido de Etileno/farmacología , Conservación de Alimentos/métodos , Salmonella enterica/efectos de los fármacos , Recuento de Colonia Microbiana , Enterococcus faecium/crecimiento & desarrollo , Conservación de Alimentos/instrumentación , Conservantes de Alimentos/química , Conservantes de Alimentos/farmacología , Inocuidad de los Alimentos , Gases/farmacología , Viabilidad Microbiana/efectos de los fármacos , Salmonella enterica/crecimiento & desarrollo , Semillas/microbiología , Especias/microbiología , TemperaturaRESUMEN
Diabetes can impair osteoblastic functions and negatively interfere with osteointegration at the bone/implant interface. Previously, we prepared a nanosized calcium silicate (CS) incorporated-polyetheretherketone (PK) biocomposite (CS/PK) and found that the CS/PK composite exhibited enhanced osteoblast functions in vitro and osteointegration in vivo, but its bioperformance under diabetic conditions remained elusive. In this study, MC3T3-E1 cells incubated on CS/PK and PK samples were subjected to diabetic serum (DS) and normal serum (NS); cell attachment, morphology, spreading, proliferation, and osteogenic differentiation were compared to assess in vitro osteoblastic functions on the surfaces of different materials. An in vivo test was performed on diabetic rabbits implanted with CS/PK or PK implants into the cranial bone defect to assess the osteointegration ability of the implants. In vitro results showed that diabetes inhibited osteoblastic functions evidenced by impaired morphology and spreading, and decreased attachment, proliferation, and osteogenic differentiation compared with the findings under normal conditions. Notably, CS/PK ameliorated osteoblastic disfunction under diabetic conditions in vitro. In vivo results from micro-CT and histologic examinations revealed that rabbits with CS/PK implants exhibited improved osteointegration at the bone/implant interface under diabetic conditions compared with PK. Therefore, the CS/PK composite improved the impaired osteointegration induced by diabetes and is a promising orthopedic or craniofacial implant material that may obtain good clinical performance in diabetic patients.
Asunto(s)
Benzofenonas/química , Compuestos de Calcio/química , Diabetes Mellitus Experimental/tratamiento farmacológico , Oseointegración/efectos de los fármacos , Polímeros/química , Silicatos/química , Células 3T3 , Animales , Materiales Biocompatibles/química , Interfase Hueso-Implante , Adhesión Celular , Diferenciación Celular , Proliferación Celular , Óxido de Etileno/química , Femenino , Técnicas In Vitro , Ratones , Nanopartículas/química , Osteoblastos/efectos de los fármacos , Osteoblastos/metabolismo , Osteogénesis/efectos de los fármacos , Prótesis e Implantes , Conejos , Titanio/química , Microtomografía por Rayos XRESUMEN
Wearing face masks is highly recommended to prevent SARS-CoV-2 transmission in health care workers and for the general public. The demand for high quality face masks has seen an upsurge in the recent times, leading to exploration of alternative economic and easily available options, without compromising on the quality. Particle removal from air in terms of capture efficiency of the filter media or the face mask is a crucial parameter for testing and quality assurance. Short-term reusability of the face masks is also an important aspect as the demand for masks will potentially outstrip the supply in future. Sterilization Wraps, which are used to wrap sterile surgical instruments, have shown a promising performance in terms of removal of particles from air. In this study, we evaluate the particle filtration characteristics of face masks made of 2 different metric weights [45 and 60 gram per square metre (GSM)] respectively, using locally available Sterilization Wraps. The aerosol filtration characteristics were also studied after sterilisation by different techniques such as heat with 50% humidity (thermal treatment), ethylene oxide (ETO), steam and radiation dose of 30kGy. We found that 60 GSM face mask had particle capture efficiency of 94% for total particles greater than 0.3 microns and this capture efficiency was maintained even after sterilisation with ETO and thermal treatment. The cost of producing these masks was 30 US cents/mask at our institute. Our study suggests that sterilization wrap material made of non-woven polypropylene spunbond-meltblown-spunbond (SMS) fibres could be an appropriate readily available inexpensive material for making face masks or N95 respirators.
Asunto(s)
Máscaras/normas , Tamaño de la Partícula , Equipo de Protección Personal/normas , Textiles/normas , Aerosoles/química , Desinfección/métodos , Desinfección/normas , Óxido de Etileno/química , Filtración/normas , Calor , Humedad , Polipropilenos/químicaRESUMEN
Epoxide hydrolases (EHs) have been characterized and engineered as biocatalysts that convert epoxides to valuable chiral vicinal diol precursors of drugs and bioactive compounds. Nonetheless, the regioselectivity control of the epoxide ring opening by EHs remains challenging. Alp1U is an α/ß-fold EH that exhibits poor regioselectivity in the epoxide hydrolysis of fluostatin C (compound 1) and produces a pair of stereoisomers. Herein, we established the absolute configuration of the two stereoisomeric products and determined the crystal structure of Alp1U. A Trp-186/Trp-187/Tyr-247 oxirane oxygen hole was identified in Alp1U that replaced the canonical Tyr/Tyr pair in α/ß-EHs. Mutation of residues in the atypical oxirane oxygen hole of Alp1U improved the regioselectivity for epoxide hydrolysis on 1. The single site Y247F mutation led to highly regioselective (98%) attack at C-3 of 1, whereas the double mutation W187F/Y247F resulted in regioselective (94%) nucleophilic attack at C-2. Furthermore, single-crystal X-ray structures of the two regioselective Alp1U variants in complex with 1 were determined. These findings allowed insights into the reaction details of Alp1U and provided a new approach for engineering regioselective epoxide hydrolases.
Asunto(s)
Cristalografía por Rayos X/métodos , Epóxido Hidrolasas/química , Epóxido Hidrolasas/metabolismo , Compuestos Epoxi/química , Óxido de Etileno/química , Mutación , Streptomyces/enzimología , Epóxido Hidrolasas/genética , Hidrólisis , Cinética , Mutagénesis Sitio-Dirigida/métodos , Estructura Terciaria de Proteína , Homología de Secuencia de Aminoácido , Estereoisomerismo , Relación Estructura-ActividadRESUMEN
In this study, lipase from Thermomyces lanuginosus (TLL) was immobilized onto the parent and organic groups modified SBA-15, and the enzymatic properties of the obtained immobilized TLL samples were investigated. 1) Activity of SBA-15-TLL at 2862.78 ± 293.24 U/g was obtained. 2) Most of the organic groups modification favored a great improvement in activity, and higher activity over 12000 U/g was observed for N-phenylaminomethyl and phenyl group modification. 3) Most of the supported TLL showed better thermostability in air while poor in phosphate buffer, with over 80% vers less than 20% of their initial activity retained after 4 h incubation at 70â. 4) The n-dodecyl, phenyl and N-phenylaminomethyl group functionalization decreased the sensitivity of immobilized TLL in extreme pH values. 5) The n-octyl and 2-(propoxymethyl)oxirane group modification confered the supported TLL good reusability, and over 60% of their initial activity was retained after five successive cycles of reuse.
Asunto(s)
Ascomicetos/enzimología , Enzimas Inmovilizadas/química , Lipasa/química , Dióxido de Silicio/química , Estabilidad de Enzimas , Óxido de Etileno/química , Concentración de Iones de Hidrógeno , Fenómenos Químicos Orgánicos , Espacio Personal , FosfatosRESUMEN
Gelatin methacryloyl (GelMA) hydrogel scaffolds and GelMA-based bioinks are widely used in tissue engineering and bioprinting due to their ability to support cellular functions and new tissue development. Unfortunately, while terminal sterilization of the GelMA is a critical step for translational tissue engineering applications, it can potentially cause thermal or chemical modifications of GelMA. Thus, understanding the effect of terminal sterilization on GelMA properties is an important, though often overlooked, aspect of material design for translational tissue engineering applications. To this end, we characterized the effects of FDA-approved terminal sterilization methods (autoclaving, ethylene oxide treatment, and gamma (γ)-irradiation) on GelMA prepolymer (bioink) and GelMA hydrogels in terms of the relevant properties for biomedical applications, including mechanical strength, biodegradation rate, cell culture in 2D and 3D, and printability. Autoclaving and ethylene oxide treatment of the GelMA decreased the stiffness of the hydrogel, but the treatments did not modify the biodegradation rate of the hydrogel; meanwhile, γ-irradiation increased the stiffness, reduced the pore size and significantly slowed the biodegradation rate. None of the terminal sterilization methods changed the 2D fibroblast or endothelial cell adhesion and spreading. However, ethylene oxide treatment significantly lowered the fibroblast viability in 3D cell culture. Strikingly, γ-irradiation led to significantly reduced ability of the GelMA prepolymer to undergo sol-gel transition. Furthermore, printability studies showed that the bioinks prepared from γ-irradiated GelMA had significantly reduced printability as compared to the GelMA bioinks prepared from autoclaved or ethylene oxide treated GelMA. These results reveal that the choice of the terminal sterilization method can strongly influence important properties of GelMA bioink and hydrogel. Overall, this study provides further insight into GelMA-based material design with consideration of the effect of terminal sterilization.
Asunto(s)
Biodegradación Ambiental , Fibroblastos/metabolismo , Gelatina/química , Hidrogeles/química , Andamios del Tejido/química , Adhesión Celular , Técnicas de Cultivo de Célula , Óxido de Etileno/química , Rayos gamma , Células Endoteliales de la Vena Umbilical Humana , Humanos , Tinta , Espectroscopía de Resonancia Magnética , Ensayo de Materiales , Transición de Fase , Impresión Tridimensional , Reología , Esterilización , Estrés Mecánico , Ingeniería de Tejidos/métodosRESUMEN
Long-chain epoxides and specifically alkyl glycidyl ethers represent a class of highly hydrophobic monomers for anionic ring-opening polymerization (AROP), resulting in apolar aliphatic polyethers. In contrast, poly(ethylene glycol) is known for its high solubility in water. The combination of hydrophobic and hydrophilic monomers in block and statistical copolymerization reactions enables the synthesis of amphiphilic polyethers for a wide range of purposes, utilizing micellar interactions in aqueous solutions, e.g., viscosity enhancement of aqueous solutions, formation of supramolecular hydrogels, or for polymeric surfactants. Controlled polymerization of these highly hydrophobic long-chain epoxide monomers via different synthesis strategies, AROP, monomer-activated anionic ring-opening polymerization, catalytic polymerization, or via postmodification, enables precise control of the hydrophilic/lipophilic balance. This renders amphiphilic polymers highly interesting candidates for specialized applications, e.g., as co-surfactants in microemulsion systems. Amphiphilic polyethers based on propylene oxide and ethylene oxide, such as poloxamers are already utilized in many established applications due to the high biocompatibility of the polyether backbone. Long alkyl chain epoxides add an interesting perspective to this area and permit structural tailoring. This review gives an overview of the recent developments regarding the synthesis of amphiphilic polyethers bearing long alkyl chains and their applications.