A Brief History of Tooth Wear.

Historical publications that have significantly improved the understanding of tooth wear mechanisms are reviewed with a focus on descriptions of the lesions, the evolution of their classification systems, and considerations addressing the main risk factors. Surprisingly, most important advances are often the oldest. Likewise, they are currently only marginally known, which requires a major dissemination effort.

Updates in association of gastroesophageal reflux disease and dental erosion: systematic review.

Introduction: Dental erosion occurs by dissolving dental apatite when exposed to non-bacterial acids. One of the factors that predispose to dental erosion is gastroesophageal reflux disease (GERD) due to chronic regurgitation of gastric contents to the oropharynx. Thus, in addition to other extraesophageal symptoms, individuals with GERD may have erosive dental lesions.Areas covered: The objective of this systematic review was to evaluate the association and prevalence of erosive wear in patients with GERD. The bibliographic search was performed in the Pubmed and Web of Science databases, using the descriptors 'gastroesophageal reflux disease' AND 'dental erosion', considering clinical studies recently published from 2012 to 2020.Expert opinion: GERD can be considered a risk factor for the development of erosive dental lesions, whose prevalence was significantly higher in this group. However, several other factors can be commonly associated with the prevalence and severity of dental erosion among the world population, such as dietary habits, lifestyle, abrasion and bruxism. Thus, the prevalence and distribution of erosive lesions among healthy and GERD subjects varied widely among studies, which denotes the etiological complexity of dental erosion and reinforces the importance of careful and detailed anamnesis in order to establish an accurate diagnosis.

Prevention of erosions by a surface sealant and adhesives under abrasive conditions

It was the aim of the current in vitro study to test the erosion-preventive potential of an experimental surface sealant (K-0184) and currently marketed self-etch adhesive systems under abrasive conditions. Ninety-six dentine specimens were randomly allocated to eight groups (n=12): (1) positive control (no treatment), (2) K-0184, (3) Shield Force Plus, (4) Xeno Select, (5) Scotchbond Universal, (6) Adhese Universal, (7) OptiBond All-In-One, and (8) Clearfil SE Bond. Before and after sealing, dentine specimens were measured profilometrically to determine the layer thickness of the protective agents.During 12 days, the specimens were demineralized daily for 5 min using hydrochloric acid (pH=3) and abraded by applying 600 brushing strokes (F=2.5 N). Calcium content in the hydrochloric acid was determined using atomic absorption spectroscopy. Calcium concentration was consistently highest in the positive control group (p < 0.05 compared to all other groups). The lowest cumulated Ca release was measured for K-0184; it differed significantly (p < 0.05) from that determined in groups 4, 6, and 7. K-0184 also had the highest layer thickness (p < 0.05 compared to all other groups). It was concluded that the experimental surface sealant K-0184 and the adhesive systems Xeno Select, Scotchbond Universal, Adhese Universal, and Clearfil SE Bond prevent dentine erosion under the current abrasive conditions with a total of 7,200 brush strokes.

In situ effect of a CPP-ACP chewing gum on enamel erosion associated or not with abrasion.

OBJECTIVES: The purpose of this study is to analyze the in situ effect of a casein phosphopeptide-stabilized amorphous calcium phosphate (CPP-ACP) chewing gum on human enamel erosion lesion associated or not with abrasion. MATERIAL AND METHODS: A three-way crossover study of 7 days was conducted involving 10 volunteers subjected to the same protocol: (G1) CPP-ACP sugar-free chewing gum, (G2) regular sugar-free chewing gum without CPP-ACP, and (G3) saliva-no chewing gum. An abrasion test was included in each phase. A 3D non-contact profilometry measurement of lesion depth and surface roughness was obtained of sound and eroded surfaces. A salivary calcium concentration was determined for all volunteers. ANOVA followed by Tukey's test were used with a p < 0.05. RESULTS: The enamel depth and the enamel surface roughness of the CPP-ACP gum group were significantly lower than the others (ANOVA, p < 0.05). No significant differences were observed between the treatments when associated with abrasion (p > 0.05). A positive and significant correlation was seen between the lesion depth and enamel surface roughness for GI (r = 0.87, p = 0.00) and GIII (r = 0.79, p = 0.00) groups. The estimated total calcium presented in the saliva after the chewed CPP-ACP gum showed no statistical significance between the mean absorbance values at the different time collections (p > 0.05). CONCLUSIONS: It is demonstrated that the incorporation of the CPP-ACP into a sugar-free gum significantly increased the remineralization/protection of eroded enamel surface. CLINICAL RELEVANCE: The CPP-ACP added to gum may be a suitable alternative vehicle, to deliver calcium ions to saliva and therefore protecting enamel.

Fatores associados ao sucesso do tratamento cirúrgico das recessões gengivais: revisão da literatura / Factors associated with success of surgical treatment of gingival recessions: literature review

Introdução: A recessão gengival é uma condição de alta prevalência que leva a exposição radicular causando queixas estéticas e sintomáticas e cujo tratamento pode ser de difícil execução caso fatores complicadores estejam associados. Objetivo: Realizar uma revisão da literatura para discutir a influência de determinados fatores sobre os resultados dos procedimentos para recobrimento radicular. Métodos: Artigos foram selecionados nas bases de dados Pubmed, Scopus, Web of Science, Scielo e LILACS. Os critérios de escolha dos artigos foram: escritos em Inglês, Espanhol, Francês ou Português e que fossem classificados como ensaios clínicos. Resultados: A busca resultou em 20 artigos selecionados que avaliaram e discutiram sobre os possíveis fatores influenciadores como fumo (11), lesão cervical não cariosa (5), biótipo periodontal (4) e anatomia local (1). Discussão: O fumo foi o fator mais discutido na literatura cujos resultados mostram que pode interferir negativamente no tratamento cirúrgico da recessão gengival, embora pacientes fumantes possam apresentar bons resultados desde que façam um bom controle do biofilme dentário. Os artigos sobre lesão cervical não cariosa mostram que os resultados do recobrimento radicular são iguais, em curto e em longo prazo, independente da lesão cervical não cariosa estar restaurada ou não ou com qual material restaurador. Indivíduos que apresentam biótipo periodontal espesso apresentaram melhor prognóstico quanto ao recobrimento radicular. Conclusão: O tratamento da recessão gengival é complexo devido estar ligado a vários fatores relacionados ao indivíduo, desde fatores anatômicos a hábitos que o mesmo apresente. A literatura demonstra que o fumo é um dos fatores que limitam a previsibilidade do tratamento das recessões gengivais (AU).

Introduction: Gingival recession is a high prevalence condition that leads to root exposure causing aesthetic and symptomatic complaints and whose treatment can be difficult to perform when factors are associated with. Objective: To perform a literature review to discuss the influence of some factors on the results of root coverage procedures. Methods: Articles were selected in data basis Pubmed, Scopus, Web of Science, Scielo, and LILACS. The inclusion criteria were the language in English, Spanish, French, and Portuguese as well as classified as clinical trials. Results: The search resulted in twenty articles selected which was evaluated and discussed about possible influencing factors such as smoking (11), non-carious cervical lesion (5), periodontal biotype (4), and local anatomy (1). Discussion: Smoking was the most discussed factor whose results demonstrate that it can adversely affect the result of surgical treatment for gingival recession, although smokers can present good results as long as they present a good control of the biofilm. Non-carious cervical lesion articles showed that the results of root coverage are the same, in short and long follow-up, regardless of whether the noncarious cervical lesion was restored or not as well as which restorative material was used. Individuals with thick periodontal biotype have a better prognosis regarding root coverage. Conclusions: The treatment of gingival recession is complex because it is linked to several factors related to the individual, anatomical factors and patients' habits. The literature demonstrates that smoking is one of the factors that limit the predictability of treatment of gingival recessions (AU).

Avaliação in vivo e in vitro de diferentes protocolos no tratamento da hipersensibilidade dentinária cervical / In vivo and in vitro study of different protocols for the treatment of cervical dentin hypersensitivity

Este estudo possui duas partes distintas: 1. in vivo (randomizado e longitudinal) que teve como objetivo avaliar protocolos de tratamento para hipersensibilidade dentinária com laser de baixa potência (com diferentes dosagens), laser de alta potência e agente dessensibilizante, por um período de 12 e 18 meses; e 2. in vitro que teve como objetivo analisar a perda de estrutura de dois dentifrícios distintos (Colgate Total 12 e Colgate Pró Alívio) e analisar a permeabilidade dentinária dos tratamentos da etapa 01, associados aos dentifrícios, após diferentes ciclos de abrasão. Na parte in vivo, as lesões cervicais não cariosas de 32 voluntários, previamente submetidos aos critérios de elegibilidade ou exclusão, foram divididas em nove grupos (n=10): G1: Gluma Desensitizer (Heraeus Kulzer), G2: Laser de baixa potência com baixa dosagem (Photon Lase, DMC) (três pontos de irradiação vestibulares e um ponto apical: 30 mW, 10 J/cm2, 9 seg por ponto com o comprimento de onda de 810nm). Foram realizadas três sessões com um intervalo de 72 horas), G3: Laser de baixa potência com alta dosagem (um ponto cervical e um ponto apical: 100 mW, 90 J/cm2, 11 seg por ponto com o comprimento de onda de 810nm. Foram realizadas três sessões com um intervalo de 72 horas), G4: Laser de baixa potência com baixa dosagem + Gluma Desensitizer, G5: Laser de baixa potência com alta dosagem + Gluma Desensitizer, G6: Laser de Nd:YAG (Power LaserTM ST6, Lares Research®), em contato com a superfície dental: 1,0W, 10 Hz e 100 mJ, ? 85 J/cm2, com o comprimento de onda de 1064nm, G7: Laser de Nd:YAG + Gluma Desensitizer, G8: Laser de Nd:YAG + Laser de baixa potência com baixa dosagem, G9: Laser de Nd:YAG + Laser de baixa potência com alta dosagem.

O nível de sensibilidade de cada voluntário foi avaliado através da escala visual analógica de dor (VAS) com auxílio do ar da seringa tríplice e exploração com sonda após 12 e 18 meses do tratamento. Na parte 02, in vitro, foram utilizados terceiros molares humanos não irrompidos e recém-extraídos. Todos foram limpos e tiveram suas raízes separadas das coroas. As raízes foram seccionadas em quadrados de dentina com dimensões de 4x4x2 mm, os quais foram embutidos em resina Epoxi e devidamente polidos até uma curvatura de 0,3 ?m, analisados em perfilometria ótica. Estes foram imersos em solução de EDTA 17% por 2min para abertura dos túbulos e armazenados em uma solução de Soro Fetal Bovino diluído em salina tamponada com fosfato. Os espécimes foram divididos aleatoriamente em 12 grupos (n=10) G1: Sem tratamento de superfície, sem dentifrício; G2: Nd:YAG/sem dentifrício; G3: Gluma/sem dentifrício; G4: Nd:YAG + Gluma/sem dentifrício; G5: Sem tratamento de superfície/Colgate Total 12; G6: Nd:YAG/Colgate Total 12; G7: Gluma/Colgate Total 12; G8: Nd:YAG + Gluma/Colgate Total 12; G9: Sem tratamento de superfície/Colgate Pró Alívio; G10: Nd:YAG/Colgate Pró Alívio; G11: Gluma/Colgate Pró Alívio; G12: Nd:YAG + Gluma/Colgate Pró Alívio. Em seguida, as superfícies receberam a aplicação de fitas adesivas nas duas margens, mantendo uma área central de teste exposta de 4 x 1 mm, onde foram realizados os tratamentos de superfície e os ciclos de abrasão correspondentes a 1, 7, 30 e 90 dias de escovação (52 ciclos, 210 segundos de contato com o slurry; 361 ciclos, 1470 segundos de contato com o slurry; 1545 ciclos, 6300 segundos de contato com o slurry; 4635 ciclos, 18900 segundos de contato com o slurry, respectivamente). A cada etapa de abrasão, foi realizada análise em Perfilometria Ótica. Para as analises de permeabilidade e Microscopia Eletrônica de Varredura, foram utilizadas amostras circulares de 6 mm de diâmetro e 1 mm de espessura de dentina...

This study has two distinct parts: in vivo (randomized and longitudinal) that aimed to assess different protocols for the treatment of dentin hypersensitivity with low power laser (with different doses), high power laser and a desensitizing agent, for a period of 12 and 18 months; and an in vitro part that aimed to analyze the loss of structure of two toothpastes (Colgate Total 12 and Colgate Pro Relief) and analyze dentin permeability and micrographs after different abrasion cycles. In the in vivo part, the lesions from 32 patients, that were submitted to the inclusion and exclusion criterias, were divided into nine groups (n = 10): G1: Gluma Desensitizer (Heraeus Kulzer), G2: Low power laser with low dose (Photon Lase, DMC, three points of irradiation in vestibular portion and an apical point: 30 mW, 10 J/cm2, 9 sec per point with the wavelength of 810nm, with three sessions with an interval of 72 hours) G3: low power laser with high dose (one pointin the cervical area, and one apical point: 100 mW, 90 J/cm2, 11 sec per point with the wavelength of 810nm in three sessions with an interval of 72 hours), G4: Low power laser with low dose + Gluma Desensitizer, G5: Low power laser with high dose + Gluma Desensitizer, G6: Nd:YAG laser (Power LaserTM ST6, Research® in contact: 1.0W, 10 Hz and 100 mJ, ? 85 J/cm2, with the wavelength of 1064nm,), G7: Nd:YAG laser + Gluma Desensitizer, G8: Nd:YAG laser + low power laser with low dose G9: Nd:YAG laser + low power laser with high dose. The level of sensitivity of each volunteer was assessed by visual analogue scale of pain (VAS) with the aid of air from the triple syringe and exploration probe, 12 and 18 months after treatment. In the in vitro part, unerupted and recently extracted human third molars were used.

Avaliação in vivo e in vitro de diferentes protocolos no tratamento da hipersensibilidade dentinária cervical / In vivo and in vitro study of different protocols for the treatment of cervical dentin hypersensitivity

Este estudo possui duas partes distintas: 1. in vivo (randomizado e longitudinal) que teve como objetivo avaliar protocolos de tratamento para hipersensibilidade dentinária com laser de baixa potência (com diferentes dosagens), laser de alta potência e agente dessensibilizante, por um período de 12 e 18 meses; e 2. in vitro que teve como objetivo analisar a perda de estrutura de dois dentifrícios distintos (Colgate Total 12 e Colgate Pró Alívio) e analisar a permeabilidade dentinária dos tratamentos da etapa 01, associados aos dentifrícios, após diferentes ciclos de abrasão. Na parte in vivo, as lesões cervicais não cariosas de 32 voluntários, previamente submetidos aos critérios de elegibilidade ou exclusão, foram divididas em nove grupos (n=10): G1: Gluma Desensitizer (Heraeus Kulzer), G2: Laser de baixa potência com baixa dosagem (Photon Lase, DMC) (três pontos de irradiação vestibulares e um ponto apical: 30 mW, 10 J/cm2, 9 seg por ponto com o comprimento de onda de 810nm). Foram realizadas três sessões com um intervalo de 72 horas), G3: Laser de baixa potência com alta dosagem (um ponto cervical e um ponto apical: 100 mW, 90 J/cm2, 11 seg por ponto com o comprimento de onda de 810nm. Foram realizadas três sessões com um intervalo de 72 horas), G4: Laser de baixa potência com baixa dosagem + Gluma Desensitizer, G5: Laser de baixa potência com alta dosagem + Gluma Desensitizer, G6: Laser de Nd:YAG (Power LaserTM ST6, Lares Research®), em contato com a superfície dental: 1,0W, 10 Hz e 100 mJ, ? 85 J/cm2, com o comprimento de onda de 1064nm, G7: Laser de Nd:YAG + Gluma Desensitizer, G8: Laser de Nd:YAG + Laser de baixa potência com baixa dosagem, G9: Laser de Nd:YAG + Laser de baixa potência com alta dosagem...

O nível de sensibilidade de cada voluntário foi avaliado através da escala visual analógica de dor (VAS) com auxílio do ar da seringa tríplice e exploração com sonda após 12 e 18 meses do tratamento. Na parte 02, in vitro, foram utilizados terceiros molares humanos não irrompidos e recém-extraídos. Todos foram limpos e tiveram suas raízes separadas das coroas. As raízes foram seccionadas em quadrados de dentina com dimensões de 4x4x2 mm, os quais foram embutidos em resina Epoxi e devidamente polidos até uma curvatura de 0,3 ?m, analisados em perfilometria ótica. Estes foram imersos em solução de EDTA 17% por 2min para abertura dos túbulos e armazenados em uma solução de Soro Fetal Bovino diluído em salina tamponada com fosfato. Os espécimes foram divididos aleatoriamente em 12 grupos (n=10) G1: Sem tratamento de superfície, sem dentifrício; G2: Nd:YAG/sem dentifrício; G3: Gluma/sem dentifrício; G4: Nd:YAG + Gluma/sem dentifrício; G5: Sem tratamento de superfície/Colgate Total 12; G6: Nd:YAG/Colgate Total 12; G7: Gluma/Colgate Total 12; G8: Nd:YAG + Gluma/Colgate Total 12; G9: Sem tratamento de superfície/Colgate Pró Alívio; G10: Nd:YAG/Colgate Pró Alívio; G11: Gluma/Colgate Pró Alívio; G12: Nd:YAG + Gluma/Colgate Pró Alívio. Em seguida, as superfícies receberam a aplicação de fitas adesivas nas duas margens, mantendo uma área central de teste exposta de 4 x 1 mm, onde foram realizados os tratamentos de superfície e os ciclos de abrasão correspondentes a 1, 7, 30 e 90 dias de escovação (52 ciclos, 210 segundos de contato com o slurry; 361 ciclos, 1470 segundos de contato com o slurry; 1545 ciclos, 6300 segundos de contato com o slurry; 4635 ciclos, 18900 segundos de contato com o slurry, respectivamente). A cada etapa de abrasão, foi realizada análise em Perfilometria Ótica. Para as analises de permeabilidade e Microscopia Eletrônica de Varredura, foram utilizadas amostras circulares de 6 mm de diâmetro e 1 mm de espessura de dentina...

This study has two distinct parts: in vivo (randomized and longitudinal) that aimed to assess different protocols for the treatment of dentin hypersensitivity with low power laser (with different doses), high power laser and a desensitizing agent, for a period of 12 and 18 months; and an in vitro part that aimed to analyze the loss of structure of two toothpastes (Colgate Total 12 and Colgate Pro Relief) and analyze dentin permeability and micrographs after different abrasion cycles. In the in vivo part, the lesions from 32 patients, that were submitted to the inclusion and exclusion criterias, were divided into nine groups (n = 10): G1: Gluma Desensitizer (Heraeus Kulzer), G2: Low power laser with low dose (Photon Lase, DMC, three points of irradiation in vestibular portion and an apical point: 30 mW, 10 J/cm2, 9 sec per point with the wavelength of 810nm, with three sessions with an interval of 72 hours) G3: low power laser with high dose (one pointin the cervical area, and one apical point: 100 mW, 90 J/cm2, 11 sec per point with the wavelength of 810nm in three sessions with an interval of 72 hours), G4: Low power laser with low dose + Gluma Desensitizer, G5: Low power laser with high dose + Gluma Desensitizer, G6: Nd:YAG laser (Power LaserTM ST6, Research® in contact: 1.0W, 10 Hz and 100 mJ, ? 85 J/cm2, with the wavelength of 1064nm,), G7: Nd:YAG laser + Gluma Desensitizer, G8: Nd:YAG laser + low power laser with low dose G9: Nd:YAG laser + low power laser with high dose. The level of sensitivity of each volunteer was assessed by visual analogue scale of pain (VAS) with the aid of air from the triple syringe and exploration probe, 12 and 18 months after treatment. In the in vitro part, unerupted and recently extracted human third molars were used...

Influence of inter-dental tissues and root surface condition on complete root coverage following treatment of gingival recessions: a 1-year retrospective study.

AIM: To explore the influence of inter-dental tissues and root surface condition on complete root coverage following surgical treatment of gingival recessions. METHODS: Three hundred and eighty-six single recessions treated over 28 years were assessed. Patient-level and periodontal variables, presence/loss of inter-dental tissues, and presence/absence of non-carious cervical lesions (NCCLs) were recorded. Root coverage was assessed 1-year post-surgery. Multilevel analysis was performed to identify predictors of CRC. RESULTS: Based on type of root coverage procedure four patient groups were created: free gingival graft (FGG) (n = 116), coronally advanced flap (CAF) (n = 107), CAF+connective tissue graft (CTG) (n = 131), and guided tissue regeneration (GTR) (n = 32). Percentages of complete root coverage (CRC) were 18.1% for FGG, 35.5% for CAF, 35.1% for CAF+CTG, and 18.8% for GTR. There was an OR = 0.26 (p < 0.0001) of achieving CRC in cases with loss of inter-dental tissue compared with cases with no inter-dental tissue loss. Similarly, cases with presence of NCCL showed an OR = 0.28 (p < 0.0001) of achieving CRC compared with cases without a NCCL. FGG achieved less CRC then CAF+CTG (p = 0.0012; OR = 0.32). CONCLUSIONS: NCCLs, just like inter-dental tissue loss, are significant negative prognostic factors in achieving CRC following root coverage procedures.

Novo método para o estudo de desgaste por atrição (deslizamento alternado) em esmalte bovino, em função da carga normal e da lubrificação: redução do desgaste com gel lubrificante oral / New method to study the wear by attrition (reciprocating sliding) in enamel, depending on the normal load and lubrication: reduction in wear with gel oral lubricant

O esmalte dental é o tecido mineralizado mais duro do corpo humano; apesar disto, seu desgaste é um problema muito comum. Este pode estar associado aos processos de envelhecimento, ou ainda, ser encontrado em indivíduos jovens, como consequência de atividades parafuncionais, por exemplo, atrição dental. Este tipo de dano pode resultar em prejuízo da função mastigatória e em diminuição da qualidade de vida. Por isto, o desgaste do esmalte dental tem sido objeto de muitos estudos, embora poucos tenham utilizado conceitos tribológicos. Não foi encontrado nenhum estudo que explorasse o desgaste de esmalte e seus micromecanismos oriundos do deslizamento alternado de incisivo contra incisivo, configuração que mais se aproxima do tribossistema real de atrição. O presente estudo tem por objeto investigar o desgaste e seus mecanismos em pares deslizantes de esmalte incisal (configuração pino-plano), selecionados por seus similares valores de dureza e de tenacidade à fratura, submetidos a diferentes cargas normais e lubrificações do meio. Incisivos bovinos foram ensaiados em deslizamento alternado sob duas cargas normais (8 N e 16 N) e quatro modos de lubrificação: saliva natural; saliva artificial; gel lubrificante oral (Oralbalance!, Biotène); e grupo controle sem lubrificação (seco)...

Enamel is the hardest mineralized tissue in the human body; despite that, the enamel wear is a very common problem. The wear damage can be related to aging processes or also be found in young people as a result of parafunctional activities, for example, dental attrition. This type of damage can result in loss of masticatory function and decreased quality of life. Therefore, the wear of the enamel has been the subject of many studies, although few have used tribological concepts. The wear mechanisms of reciprocating sliding pairs from incisor against incisor have not been reported in the literature, this configuration is the one that is closest to the real tribosystem of attrition. The present study aims to investigate the wear behavior and the related mechanisms in reciprocating sliding pairs of incisal enamel (pin-on-flat configuration), selected for their similar hardness and fracture toughness values, with different applied normal loads and lubrication conditions. Bovine incisors were tested in reciprocating sliding with different applied normal loads (8 N and 16 N) and four lubrication conditions: natural saliva; artificial saliva; oral gel lubricant (Oralbalance!, Biotène); and control group (dry). During tests, the friction curves were recorded...

[Optimization of treatment of wedge-shaped tooth defects with hyperesthesia].

Development of tooth wedge-shaped defect leads to a gradual loss of hard tissue and is characterized by pain. Most often patients complain of pain and aesthetic defect that adversely affects the emotional status and quality of life. Search for adequate means and methods of treatment providing increased resistance of dental hard tissues and reducing hyperesthesia is challenging for dentists. Wedge-shaped defect and hyperesthesia as concomitant symptom was found in the city of Ufa in the 5.65 and 63.0% of dental patients, respectively. Analysis of the questionnaires revealed a relationship between the sociological parameters (gender, age, profession) and the patient's quality of life. Improvement of all clinical manifestations was observed in the result of complex treatment.

Use of the connective tissue graft for the coverage of composite resin-restored root surfaces in maxillary central incisors.

The purpose of this article is to report the use of the subepithelial connective tissue graft technique combined with the coronally positioned flap on a composite resin-restored root surface to treat Miller Class I gingival recessions associated with deep cervical abrasions in maxillary central incisors. Clinical measurements, including gingival recession height, probing depth, and bleeding on probing (BoP), were recorded during the preoperative clinical examination and at 2, 6, 12, and 24 months postoperatively. During the follow-up periods, no periodontal pockets or BoP were observed. The periodontal tissue of the teeth presented normal color, texture, and contouring. In addition, it was observed that creeping attachment had occurred on the restoration. This case report shows that this form of treatment can be highly effective and predictable in resolving gingival recession associated with a deep cervical abrasion.

The erosion and abrasion-inhibiting effect of TiF(4) and NaF varnishes and solutions on enamel in vitro.

OBJECTIVE. Previous in vitro study has shown that TiF(4) varnish might reduce enamel erosion. No data regarding the effect of this experimental varnish on enamel erosion plus abrasion, however, are available so far. Thus, this in vitro study aimed to analyse the effect of TiF(4) compared with NaF varnishes and solutions, to protect against enamel erosion with or without abrasion. METHODS. Enamel specimens were pre-treated with experimental-TiF(4) (2.45% F), experimental-NaF (2.45% F), NaF-Duraphat (2.26% F), and placebo varnishes; NaF (2.26% F) and TiF(4) (2.45% F) solutions. Controls remained untreated. The erosive challenge was performed using a soft drink (pH 2.6) 4 × 90 s/day (ERO) and the toothbrushing abrasion (ERO+ABR) 2 × 10 s/day, for 5 days. Between the challenges, the specimens were exposed to artificial saliva. Enamel loss was measured profilometrically (µm). RESULTS. Kruskal-Wallis/Dunn tests showed that all fluoridated varnishes (TiF(4) -ERO:0.53 ± 0.20, ERO+ABR:0.65 ± 0.19/NaF-ERO:0.94 ± 0.18, ERO+ABR:1.74 ± 0.37/Duraphat-ERO:1.00 ± 0.37, ERO+ABR:1.72 ± 0.58) were able to significantly reduce enamel loss when compared with placebo varnish (ERO:3.45 ± 0.41/ERO+ABR:3.20 ± 0.66) (P < 0.0001). Placebo varnish, control (ERO:2.68 ± 0.53/ERO+ABR:3.01 ± 0.34), and fluoridated (NaF-ERO:2.84 ± 0.09/ERO+ABR:2.40 ± 0.21/TiF(4) -ERO:3.55 ± 0.59/ERO+ABR:4.10 ± 0.38) solutions did not significantly differ from each other. CONCLUSION. Based on the results, it can be concluded that the TiF(4) varnish seems to be a promising treatment to reduce enamel loss under mild erosive and abrasive conditions in vitro.

In situ randomised trial investigating abrasive effects of two desensitising toothpastes on dentine with acidic challenge prior to brushing.

OBJECTIVES: To determine if brushing dentine with 2 moderate RDA desensitising toothpastes, results in a significant dentine wear difference and whether this difference continues to be relevant when preceded with an erosive challenge. METHODS: An in situ, single centre, single blind, randomised, split mouth study, evaluated the difference in abrasion of 2 toothpastes (SFM - Sensodyne Fresh Mint(®) RDA 70; CPHM - Crest Pro-Health Clean Mint(®) RDA 120) in 28 healthy volunteers. Two toothpaste treatments were administered 3×/day, for each of the two 15 day periods, subjects wearing bi-lateral, lower buccal appliances each with 4 dentine sections. A 2 min extra-oral acidic challenge preceded toothbrushing for 2 study arms. Contact profilometry measured samples at baseline, days 5, 10 and 15. RESULTS: Brushing with SFM was significantly less abrasive than brushing with CPHM at all time points, with or without a preceding acidic challenge (p<0.0001). The additional dentine loss arising from the erosive challenge prior to brushing with each paste was linear with time and independent of abrasive effect. CONCLUSIONS: The desensiting toothpastes' RDA, directly related to dentine loss with toothbrushing. An acidic challenge prior to brushing did not negate the benefits of reduced wear from the lower RDA paste compared to the higher RDA paste. When brushing eroded dentine, the additional wear appeared independent of abrasive effect. Dentine hypersensitivity sufferers should be recommended to use a low-moderate RDA toothpaste, not to brush more than 2×/day and not immediately following an acidic challenge.