Separation and determination of the group-type composition of modern base and lubricating oils with a wide range of polarity, especially emitted to the environment.

Lubricating oils are composed of base oils (>85% v/v) and enriching additives (<15% v/v). Three types of base oils may be distinguished: 1) traditional bases (obtained by low-volatile fractions from crude oil distillation refining), 2) synthetic bases (mainly poly-alpha-olefins, sometimes esters, especially succinic acid esters), 3) bases of natural origin (especially obtained from refined plant oils). The bases of natural origin are the only ones recommended for application when lubricating oil may be emitted to the environment (e.g. when the machine with an open cutting system is used). Group-type separation and analysis of group-type composition of base and lubricating oils are of significant importance in quality control and environmental monitoring. Due to the potentially wide range of polarity of the components of base and lubricating oils, group- type separation becomes a difficult separation problem. It is also a serious analytical problem due to the considerable diversity of physicochemical properties. The authors propose a new procedure for the separation and determination of the group-type composition of base and lubricating oils using thin-layer liquid chromatography in normal phase systems (abr. NP-TLC) on silica gel plates impregnated with berberine salt/in the coupling of thin-layer chromatography with flame ionization detection (abr. TLC-FID). A new, effective procedure of TLC plates impregnation with berberine sulphate was presented. The proposed procedure ensures the visualization of all groups of base oils. Extensive experimental research showed that a 2-step development procedure with application of n-hexane up to 100% height of development +15 min and further n-hexane: isopropanol: tri-fluoroacetic acid 96.25: 3: 0.75 (v: v: v) up to 75% height of development is advantageous for the group-type separation, both in TLC-FID and TLC.

Nanostructured systems increase the in vitro cytotoxic effect of bullfrog oil in human melanoma cells (A2058).

The aim of this work was to investigate the in vitro cytotoxic effect of previously developed nanocapsules, nanoemulsion, and microemulsion based on bullfrog oil (BFO) against human melanoma cells (A2058). The nanosystems were produced as described in previous studies and characterized according to droplet/particle distribution and zeta potential. The biocompatibility was evaluated by the determination of the hemolytic potential against human erythrocytes. The cytotoxicity assessment was based on MTT and cell death assays, determination of Reactive Oxygen Species (ROS) levels, and cell uptake. The nanosystems were successfully reproduced and showed hemolytic potential smaller than 10% at all oil concentrations (50 and 100 µg.mL-1) (p < 0.05). The MTT assay revealed that the nanosystems decreased the mitochondrial activity up to 92 ± 2% (p < 0.05). The study showed that the free BFO induced cell apoptosis, while all the nanostructured systems caused cell death by necrosis associated with a ROS overproduction. This can be related to the increased ability of the nanostructured systems to deliver the BFO across all cellular compartments (membrane, cytoplasm, and nucleus). Finally, these results elucidate the in vitro BFO nanosystems cytotoxic effect against human melanoma cells (A2058), revealing the emulsified ones as the most cytotoxic systems. Overall, the findings suggest that the safety and antineoplastic activity of these systems can be further investigated by in vivo studies.

Shrimp Oil Extracted from Shrimp Processing By-Product Is a Rich Source of Omega-3 Fatty Acids and Astaxanthin-Esters, and Reveals Potential Anti-Adipogenic Effects in 3T3-L1 Adipocytes.

The province of Newfoundland and Labrador, Canada, generates tons of shrimp processing by-product every year. Shrimp contains omega (n)-3 polyunsaturated fatty acids (PUFA) and astaxanthin (Astx), a potent antioxidant that exists in either free or esterified form (Astx-E). In this study, shrimp oil (SO) was extracted from the shrimp processing by-product using the Soxhlet method (hexane:acetone 2:3). The extracted SO was rich in phospholipids, n-3 PUFA, and Astx-E. The 3T3-L1 preadipocytes were differentiated to mature adipocytes in the presence or absence of various treatments for 8 days. The effects of SO were then investigated on fat accumulation, and the mRNA expression of genes involved in adipogenesis and lipogenesis in 3T3-L1 cells. The effects of fish oil (FO), in combination with Astx-E, on fat accumulation, and the mRNA expression of genes involved in adipogenesis and lipogenesis were also investigated. The SO decreased fat accumulation, compared to untreated cells, which coincided with lower mRNA expression of adipogenic and lipogenic genes. However, FO and FO + Astx-E increased fat accumulation, along with increased mRNA expression of adipogenic and lipogenic genes, and glucose transporter type 4 (Glut-4), compared to untreated cells. These findings have demonstrated that the SO is a rich source of n-3 PUFA and Astx-E, and has the potential to elicit anti-adipogenic effects. Moreover, the SO and FO appear to regulate adipogenesis and lipogenesis via independent pathways in 3T3-L1 cells.

Characterization of Molecular Species and Anti-Inflammatory Activity of Purified Phospholipids from Antarctic Krill Oil.

The phospholipids (PLs) from Antarctic krill oil were purified (>97.2%) using adsorption column chromatography. Forty-nine PL molecular species were characterized by ultrahigh-performance liquid chromatography-quadrupole-time-of-flight mass spectrometry (UHPLC-Q-TOF-MS). Most of molecular species contained eicosapentaenoic acid (EPA, 20:5), docosahexaenoic acid (DHA, 22:6), docosapentaenoic acid (DPA, 22:5), and arachidonic acid (AA, 20:4). Notably, a special species PC (20:5/22:6) (1298.17 nmol/g) and many ether PLs were detected. The Antarctic krill PL liposome (IC50 = 0.108 mg/mL) showed better anti-inflammatory activity than crude Antarctic krill oil (IC50 = 0.446 mg/mL). It could block NF-κB signaling pathway via suppression of IκB-α degradation and p65 activation and dose-dependently reduce the cellular content of inflammatory mediators including nitric oxide (NO), reactive oxygen species (ROS), and inflammatory cytokines in lipopolysaccharide (LPS)-stimulated RAW 264.7 cells. In addition, it can suppress carrageenan-induced mouse paw swelling. Results from the present study could provide a reference for better evaluation of nutritional and medicinal values of Antarctic krill oil.

Treatment of wastewater containing oil and grease by biological method- a review.

One of the complex environmental problems that triggers at present is oily wastewater contamination arising out of the activities related to engineering vehicular (automobile) workshop or garage, kitchens in houses and restaurants, gas stations, metal finishing house, petrochemical industry, edible oil production unit etc. Oily wastewater discharge is a major issue of environmental pollution in the present decade as some of its constituents are hazardous in nature. Hence, appropriate treatment technology for oily wastewater needs to be addressed. Biological treatment (BT) technique would be the best option in this regard, because it has multiple advantages over various other techniques as available today. BT degrades effectively the harmful constituents of oily wastewater into innocuous products that are environment friendly and it is considered to be the economical method. The resulting effluent of pretreatment followed by biological treatment of oily wastewater can be reused after conforming discharge limits. Again, numerous research works in these days have optimized the function and result of existing laboratory and pilot scale treatment technologies. This review paper describes a comprehensive understanding of the origin and characteristics, existing techniques in laboratory and pilot scale, screening of different methods, justification for advocating biological methods for treatment of oily wastewater.

Processing Methodologies of Wet Microalga Biomass Toward Oil Separation: An Overview.

One of the main goals of Mankind is to ensure food system sustainability-including management of land, soil, water, and biodiversity. Microalgae accordingly appear as an innovative and scalable alternative source in view of the richness of their chemical profiles. In what concerns lipids in particular, microalgae can synthesize and accumulate significant amounts of fatty acids, a great fraction of which are polyunsaturated; this makes them excellent candidates within the framework of production and exploitation of lipids by various industrial and health sectors, either as bulk products or fine chemicals. Conventional lipid extraction methodologies require previous dehydration of microalgal biomass, which hampers economic feasibility due to the high energy demands thereof. Therefore, extraction of lipids directly from wet biomass would be a plus in this endeavor. Supporting processes and methodologies are still limited, and most approaches are empirical in nature-so a deeper mechanistic elucidation is a must, in order to facilitate rational optimization of the extraction processes. Besides circumventing the current high energy demands by dehydration, an ideal extraction method should be selective, sustainable, efficient, harmless, and feasible for upscale to industrial level. This review presents and discusses several pretreatments incurred in lipid extraction from wet microalga biomass, namely recent developments and integrated processes. Unfortunately, most such developments have been proven at bench-scale only-so demonstration in large facilities is still needed to confirm whether they can turn into competitive alternatives.

Anabolism of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Cupriavidus necator DSM 545 from spent coffee grounds oil.

Oil extracted from spent coffee grounds (SCG) [yield 16.8 % (w/w)] was discovered to be a highly suitable carbon substrate for the biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3 HV)] copolymers by Cupriavidus necator DSM 545 in the absence of any traditional 3 HV precursors. Cells cultivated in a 3 L bioreactor (batch) reached a total biomass concentration of 8.9 g L-1 with a P(3HB-co-3 HV) (6.8 mol% 3 HV) content of 89.6 % (w/w). In contrast, cells grown on sunflower oil reached a total biomass concentration of 9.4 gL-1 with a P(3HB-co-3 HV) (0.2 mol% 3 HV) content of 88.1 % (w/w). It is proposed that the organism could synthesize 3 HV monomers from succinyl CoA, an intermediate of the tricarboxylic acid (TCA) cycle, via the succinate-propionate metabolic pathway.

Preparation and Characterization of Microemulsions Based on Antarctic Krill Oil.

Antarctic krill oil is high in nutritional value and has biological functions like anti-inflammation and hypolipidemic effects. But it has and unpleasant smell, and unsaturated fatty acids are prone to oxidative deterioration. Its high viscosity and low solubility in water make it difficult for processing. Microemulsion can be a new promising route for development of krill oil product. We determined a formula of krill oil-in-water microemulsion with krill oil: isopropyl myristate = 1:3 as oil phase, Tween 80:Span 80 = 8:2 as surfactant, ethanol as co-surfactant and the mass ratio of surfactant to co-surfactant of 3:1. After screening the formula, we researched several characteristics of the prepared oil-in-water microemulsion, including electrical conductivity, microstructure by transmission electron microscope and cryogenic transmission electron microscope, droplet size analysis, rheological properties, thermal behavior by differential scanning calorimeter and stability against pH, salinity, and storage time.

Experimental evaluation of oil recovery mechanism using a variety of surface-modified silica nanoparticles: Role of in-situ surface-modification in oil-wet system.

Recent developments propose renewed use of surface-modified nanoparticles (NPs) for enhanced oil recovery (EOR) due to improved stability and reduced porous media retention. The enhanced surface properties render the nanoparticles more suitable compared to bare nanoparticles, for increasing the displacement efficiency of waterflooding. However, the EOR mechanisms using NPs are still not well established. This work investigates the effect of in-situ surface-modified silica nanoparticles (SiO2 NPs) on interfacial tension (IFT) and wettability behavior as a prevailing oil recovery mechanism. For this purpose, the nanoparticles have been synthesized via a one-step sol-gel method using surface-modification agents, including Triton X-100 (non-ionic surfactant) and polyethylene glycol (polymer), and characterized using various techniques. These results exhibit the well-defined spherical particles, particularly in the presence of Triton X-100 (TX-100), with particle diameter between 13 to 27 nm. To this end, SiO2 nanofluids were formed by dispersing nanoparticles (0.05 wt.%, 0.075 wt.%, 0.1 wt.%, and 0.2 wt.%) in 3 wt.% NaCl to study the impact of surface functionalization on the stability of the nanoparticle suspension. The optimal stability conditions were obtained at 0.1 wt.% SiO2 NPs at a basic pH of 10 and 9.5 for TX-100/ SiO2 and PEG/SiO nanofluids, respectively. Finally, the surface-treated SiO2 nanoparticles were found to change the wettability of treated (oil-wet) surface into water-wet by altering the contact angle from 130° to 78° (in case of TX-100/SiO2) measured against glass surface representing carbonate reservoir rock. IFT results also reveal that the surfactant treatment greatly reduced the oil-water IFT by 30%, compared to other applied NPs. These experimental results suggest that the use of surface-modified SiO2 nanoparticles could facilitate the displacement efficiency by reducing IFT and altering the wettability of carbonate reservoir towards water-wet, which is attributed to more homogeneity and better dispersion of surface-treated silica NPs compared to bare-silica NPs.

An integrated microbiome and metabolomic analysis identifies immunoenhancing features of Ganoderma lucidum spores oil in mice.

Ganoderma lucidum (Leyss. ex Fr.) Karst. is a valuable dietary supplement used worldwide for promoting health as well as a medicinal fungus for handling fatigue, immunological disorders, and cancer. Previous studies have revealed the immunoenhancing effect of G. lucidum and the polysaccharide extract, with potential involvement of gut microbiome. The oil of G. lucidum spores (GLSO)is one of the well-known G. lucidum-related products. However, there is little evidence supporting the immune promotion activity and the underlying mechanisms. The present study aims to investigate the immunoenhancing effect of GLSO in mice. GLSO enhanced macrophage phagocytosis and NK cell cytotoxicity of mice. Further microbiome and metabolomics studies showed that GLSO induced structural rearrangement of gut microbiota, mediating alterations in a wide range of metabolites. By clustering, multivariate and correlation analysis, the immunoenhancing effect of GLSO was found to be highly correlated with elevated abundance of several bacterial genera (Lactobacillus, Turicibacter and Romboutsia) and species (Lactobacillus_intestinalis and Lactobacillus_reuteri), and decreased level of Staphylococcus and Helicobacter, which resulted in the regulation of a range of key metabolites such as dopamine, prolyl-glutamine, pentahomomethionine, leucyl-glutamine, l-threonine, stearoylcarnitine, dolichyl ß-d-glucosyl phosphate, etc. These results provide new insights into the understanding of the modulatory effect of GLSO on immune system.

A Novel Freeze-Drying-Free Strategy to Fabricate a Biobased Tough Aerogel for Separation of Oil/Water Mixtures.

Renewable biobased porous aerogels with excellent biodegradability have versatile applications in oil/water separation, catalysis, and tissue engineering. However, processing of the porous matrix is challenging due to the high energy consumption and low efficiency from the fabrication procedures, such as freeze-drying or critical-drying of the hydrogel, which need to be improved. In the present study, natural amphiphilic oligomer shellac secreted by the lac Kerriar Lacca insect was employed to fabricate the porous template, which could self-assemble into a continuous rigid network with a hydrophobic core. Because of the hydrophobic core, the hydrated shellac network could be directly dried without collapse by the ambient air. The air-drying shellac aerogel presented a great mechanical property. The silane-coating treatment converted this shellac aerogel into a hydrophobic material that absorbed various organic solvents and oils. Also, this silane-coated shellac aerogel also could remove organic solvent or oil from the bottom or surface of the water. Notably, the saturable aerogel rapidly degraded in pH 14 and released the solvent absorbed by this matrix. This porous and hydrophobic matrix also could be applied as a filter that could connect with a vacuum pump to assemble a device for continuous collecting of oil from water. It also has great potential to be employed as a high-efficiency strategy to treat large scale oil spill issues. A new porous template composed of natural resin secreted by the insect was fabricated, and the whole fabrication process was green, low-cost, and energy saving. The surface of this template could be modified further to effectuate other processes, such as catalysis, heavy metal absorption, and tissue proliferation.

Dewatering of algal suspension using microfiltration with cross flow in the presence of magnetite as a filter aid.

Dewatering algal suspensions is an important step in the extraction of oil and other useful substances from algae. In this study, spherical Nannochloropsis sp. and ellipsoidal Monoraphidium sp. suspensions were dewatered in the presence of different amounts of 350-nm magnetite particles using a microfiltration membrane with 360-nm pores in cross-flow mode. Magnetite functions as a filter aid by reducing the deformation of the cake of filtered algae on the membrane and providing paths for water to flow through the filtration cake of algae. In the case of Nannochloropsis sp., the highest dewatering rate was obtained when the number ratio, defined based on the size and ideal density, between Nannochloropsis sp. and magnetite was 1:12.5, but the addition of magnetite had no observable effect on the filtration of ellipsoidal Monoraphidium sp. suspensions through the membrane. After dewatering, magnetite was effectively separated from the concentrated algal suspension by the application of a magnetic field in an open flow system. Magnetite has the potential to enhance dewatering performance using a cross-flow membrane system.

A novel hydroxofluorographene-coated melamine foam for efficient and repeatable oil removal from water.

With the frequent occurrence of oil spill accidents and the continuous discharge of oily water during oil production and transportation, effective oil removal from environmental water by adsorption still faces severe challenges. Here, a novel absorbent hydroxofluorographene-coated melamine foam, namely G(OH)F@MF, with high affinity to oils was fabricated via stepwise assembly. The G(OH)F@MF absorbent achieved effective removal of various oils within 1 min with relatively high adsorption capacities for petrol (89.34 g/g), lubricating oil (89.60 g/g), and peanut oil (104.79 g/g). Furthermore, it could be regenerated by simply squeezing and reused for more than 10 times with an adsorption capacity exceeding 37.12 g/g. In addition, the results indicated that the G(OH)F@MF absorbent was suitable for oil cleanup at a wide range of pH values (4-12) and temperatures (5-45 °C). The adsorption performance of the material was stable in the presence of natural organic matter and even in different water environments. This study can provide a novel sorbent and method for the green, rapid, recyclable, and stable removal of oils from environmental water.

Multi-functional magnetic bacteria as efficient and economical Pickering emulsifiers for encapsulation and removal of oil from water.

HYPOTHESIS: Effective removal of oil pollutants from the surface of water is important in oil-polluted environments. Since living microorganisms can be used as particle-stabilizers for oil emulsification, magnet-responsive oil-degrading bacteria (M-Bacteria) are expected to integrate three intriguing properties, such as Pickering emulsification, magnet-responsiveness and bioactivity. Hence, by acting as an efficient Pickering emulsifier to encapsulate oil pollutants, it should be possible to eliminate oil from water under the application of an external magnetic field. EXPERIMENTS: Oil-degrading bacteria, Brevibacillus parabrev, were successfully coated with a shell of magnetic Fe3O4 nanoparticles using polycations. The morphology and physicochemical characteristics of M-Bacteria were characterized by various techniques. A systematic study on Pickering emulsification of M-Bacteria and the removal of five types of oils were performed. Specific adsorption of M-Bacteria at the oil droplet surface was observed through optical, fluorescence, and scanning electronic microscopy images. The biodegradation process of oil was monitored using gas chromatography. FINDINGS: Eco-friendly M-Bacteria not only acts as an effective particle emulsifier to realize encapsulation and magnetic separation of oil contaminants but also shows a strong ability for further conversion of oil. This is the first report of oil removal via Pickering emulsification of living bacterial cells, which shows the potential of bacterial cells as functional colloidal materials in treating oily wastewater.

Alterations of the Brain Proteome and Gut Microbiota in d-Galactose-Induced Brain-Aging Mice with Krill Oil Supplementation.

Brain aging is commonly associated with neurodegenerative disorders, but the ameliorative effect of krill oil and the underlying mechanism remain unclear. In this study, the components of krill oil were measured, and the antiaging effects of krill oil were investigated in mice with d-galactose (d-gal)-induced brain aging via proteomics and gut microbiota analysis. Krill oil treatment decreased the expression of truncated dopamine- and cAMP-regulated phosphoproteins and proteins involved in the calcium signaling pathway. In addition, the concentrations of dopamine were increased in the serum (p < 0.05) and brain (p > 0.05) due to the enhanced expressions of tyrosine-3-monooxygenase and aromatic l-amino acid decarboxylase. Moreover, krill oil alleviated gut microbiota dysbiosis, decreased the abundance of bacteria that consume the precursor tyrosine, and increased the abundance of Lactobacillus spp. and short-chain fatty acid producers. This study revealed the beneficial effect of krill oil against d-gal-induced brain aging and clarified the underlying mechanism through proteomics and gut microbiota analysis.

Producing Oleaginous Organisms Using Food Waste: Challenges and Outcomes.

With organic or food waste being one of the main constituents of the total urban waste generated, it not only makes it essential to seek means for its safe disposal but at the same time reiterates the huge potential that lies with the proper utilization of such a widely available resource. Oleaginous microbes that are effective in producing or storing oil would use food waste rich in carbohydrates, lipids, and proteins, and this oil in turn could be an alternative feedstock for the production of biofuels. However, there are few challenges in the process. The various challenges in this process and methods to address them are discussed in the present chapter.

Hydrophobically modified chitin/halloysite nanotubes composite sponges for high efficiency oil-water separation.

A high-performance oil-water separation device that built by environment-friendly materials is a promising strategy to solve water pollution problem. In this study, we developed an oil-water separation system with chitin/halloysite nanotubes (C/HNTs) composites. C/HNTs were crosslinked by epichlorohydrin and freeze-dried, then a porous sponge was formed. The C/HNTs sponge was modified to be hydrophobic via immersing into bromohexadecane ethanol solution. The surface structure, mechanical properties, microstructure, oil absorption and oil-water separation ability of the C/HNTs sponge were investigated. The addition of HNTs significantly increased the compressive strength of chitin sponge without influence on porous structure. IR spectra indicated the successful coating of bromohexadecane on the C/HNTs sponge surface, which enabled the hydrophobicity and lipophilicity of this construct. The inside construct of the C/HNTs sponges were full of interconnected pores, and the pore size ranged from 250 to 500 µm. The absorption capability for various oil and grease were measured, including methylbenzene, sunflower seed oil, carbon dichloride, n-hexane, chloroform and acetone. It is found that the total amount of chloroform absorbed by a C/HNTs sponge was ~11.23 times of the sponge's weight, and the absorption for hexane was ~3.94 times of the sponge's weight. The sponge also exhibited an excellent oil-water separation ability with as high as 98.7% separation efficiency. All the results suggested that the chitin/HNTs sponges with improved mechanical property would have a great potential in oil-water separation.

Facile synthesis of electrospun carbon nanofiber/graphene oxide composite aerogels for high efficiency oils absorption.

Oil contamination will seriously affect the health of water environment, so it is necessary to design ideal oil absorbents with large absorption capacity and high selectivity for effectively purify the oil contaminated water. Preparing high performance carbon aerogel for oil absorption has attracted growing attention, but challenges remain. Here we report a facile approach to fabricate mechanical strength enhanced three-dimensional (3D) nanofibrous aerogel principally through supporting agent liquid assisted collection-electrospinning technology, in which the immersion work was applied to measure the immersion capacity of nanofibers according to liquid-solid interfaces theory. Particularly, electrospun polyacrylonitrile (PAN) nanofibers (NFs) were collected directly in graphene oxide (GO) aqueous dispersion, and the continuous fibrous skeleton assembled with two-dimensional (2D) GO sheets to form open porous networks during the electrospinning process, which basically avoided the tedious preparation steps (nanofiber membrane cutting and re-crosslinking) that have been used previously. Due to the open porous networks promising structure stability of the aerogel, the GO sheets content required in the aerogel stacking process was largely reduced, and there was no strict requirement on the pre-freezing temperature and manner in the subsequent freeze-drying process. Furthermore, followed by thermal treating the PAN NFs/GO composite aerogel, fluffy carbon nanofibers/GO aerogels (CNF/GOAs) were obtained, which exhibited ultra-low density (2-3 mg/mL) and great compressibility (80%). After hydrophobic modification of polydimethylsiloxane by vapor deposition, the CNF/GOAs performed high absorption capacity (120-286 wt/wt) toward diverse oils. Owing to the fire-resistance and great elasticity, the CNF/GOAs could be recycled simply by combustion or mechanical squeeze, and still showed great absorption capacity after 10 cycles, which were feasible for large scale application.

The biopolymer produced by Rhizobium viscosum CECT 908 is a promising agent for application in microbial enhanced oil recovery.

Polymer flooding is one of the most promising techniques used to increase the productivity of mature oil reservoirs. Polymers reduce the mobility ratio of the injected water relative to the crude oil, improving the displacement of the entrapped oil and consequently, increasing oil recovery. Biopolymers such as xanthan gum have emerged as environmentally friendly alternatives to the chemical polymers commonly employed by the oil industry. However, in order to seek more efficient biomolecules, alternative biopolymers must be studied. Here, the applicability of a biopolymer produced by Rhizobium viscosum CECT 908 in Microbial Enhanced Oil Recovery (MEOR) was evaluated. This biopolymer exhibited better rheological properties (including higher viscosity) when compared with xanthan gum. Its stability at high shear rates (up to 300 s-1), temperatures (up to 80 °C) and salinities (up to 200 g/L of NaCl) was also demonstrated. The biopolymer exhibited better performance than xanthan gum in oil recovery assays performed with a heavy crude oil, achieving 25.7 ± 0.5% of additional recovery. Thus the R. viscosum CECT 908 biopolymer is a promising candidate for application in MEOR.

Preparation and application of magnetic superhydrophobic polydivinylbenzene nanofibers for oil adsorption in wastewater.

Superhydrophobic materials have an excellent performance in oil adsorption. In this study, a novel magnetic polydivinylbenzene (PDVB) nanofiber was synthesized by the method of cation polymerization to adsorb oil from water. The magnetic PDVB was hollow nanofiber with Fe3O4 nanoparticles embedded in its structure. The synthesis condition was optimized that the ratio of divinylbenzene (DVB) to boron fluoride ethyl ether (BFEE) was 10:1 (v/v), and the Fe3O4 dosage was 0.175 g/g of DVB. The material showed an excellent oil adsorption performance in wastewater, and the oil concentration could be reduced from 2000 to 92.2 mg/L within 5 min. The magnetic PDVB had relatively high adsorption capacity (12 g/g) for oil, which could be attributed to its super hydrophobicity and one-dimensional nanostructure with high crosslinking degree. The isotherm study indicated that the magnetic PDVB adsorbed oil was an asymmetric or multilayer adsorption process. The material could be regenerated by simple squeeze and maintain its adsorption capacity after it has been used for 10 recycles. In real coking wastewater, the magnetic PDVB kept a good oil adsorption performance without the interference of various pollutants, indicating a wide prospect in practical use.