Acetone-assisted co-processing of meloxicam with amino acids for enhanced dissolution rate.

Meloxicam is a widely used non-steroidal anti-inflammatory agent. However, its erratic and poor dissolution delays its onset of action. Dissolution enhancement of such medicine is essential to obtain rapid pain relief. Amino acids showed high potential to enhance the dissolution rate of drugs after co-processing. Accordingly, the objective of this work was to investigate the effect of co-processing of meloxicam with arginine, cysteine, and glycine on its crystalline structure and dissolution rate. Meloxicam was mixed with increasing molar ratios of amino acids before acetone-assisted kneading. The resulting products were examined using Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction in addition to monitoring the dissolution behavior. Combined instrumental analysis indicated salt formation with a possibility of further crystalline changes at high concentration of amino acids. Salt formation and crystalline structure modification were associated with a significant increase in the dissolution rate of meloxicam. The study introduced amino acids as potential excipients for enhanced dissolution of meloxicam after wet co-processing.

Synthesis of (R,S)-isoproterenol, an inhibitor of tau aggregation, as an 11C-labeled PET tracer via reductive alkylation of (R,S)-norepinephrine with [2-11C]acetone.

(R,S)-Isoproterenol inhibits the formation of toxic granular tau oligomers associated with neuronal loss and development of cognitive disorders, and is an attractive drug candidate for Alzheimer's disease. To elucidate its behavior in the brain by positron emission tomography, we synthesize (R,S)-[11C]isoproterenol by reductive alkylation of (R,S)-norepinephrine with [2-11C]acetone, which was in turn synthesized in situ under improved conditions afforded a decay-corrected radiochemical yield of 54%. The reductive alkylation using NaBH(OAc)3 as reducing agent in the presence of benzoic acid in DMSO/DMF (60:40 v/v) at 100 °C for 10 min gave (R,S)-[11C]isoproterenol in an 87% radio-high performance liquid chromatography (HPLC) analytical yield. HPLC separation using a strong cation exchange column, followed by pharmaceutical formulation in the presence of d/l-tartaric acid, afforded (R,S)-[11C]isoproterenol with a total radioactivity of 2.0 ±â€¯0.2 GBq, a decay-corrected radiochemical yield of 19 ±â€¯2%, chemical and radiochemical purities of 71% and >99%, respectively, and a molar activity of 100 ±â€¯13 GBq/µmol (n = 3). The overall synthesis time from the end of the bombardment to pharmaceutical formulation was 48 min. A preliminary preclinical PET study in a rat demonstrated the potential of the radioligand for the evaluation of the penetration of (R,S)-isoproterenol in human brain.

Suzuki-Miyaura Coupling of Simple Ketones via Activation of Unstrained Carbon-Carbon Bonds.

Here, we describe that simple ketones can be efficiently employed as electrophiles in Suzuki-Miyaura coupling reactions via catalytic activation of unstrained C-C bonds. A range of common ketones, such as cyclopentanones, acetophenones, acetone and 1-indanones, could be directly coupled with various arylboronates in high site-selectivity, which offers a distinct entry to more functionalized aromatic ketones. Preliminary mechanistic study suggests that the ketone α-C-C bond was cleaved via oxidative addition.

'APAAN in the neck' - A reflection on some novel impurities found in seized materials containing amphetamine in Ireland during routine forensic analysis.

This perspective examines amphetamine importations into Ireland. Some novel by-products were detected and linked to a change in the method of production of P2P from APAAN. These by-products remained present during subsequent Leuckart reaction conditions. Novel by-products from substituted cathinone synthesis reactions were also isolated and characterized.

Isolation and characterization of a newly identified impurity in methamphetamine synthesized via reductive amination of 1-phenyl-2-propanone (P2P) made from phenylacetic acid/lead (II) acetate.

A trace processing impurity found in certain methamphetamine exhibits was isolated and identified as trans-N-methyl-4-methyl-5-phenyl-4-penten-2-amine hydrochloride (1). It was determined that this impurity was produced via reductive amination of trans-4-methyl-5-phenyl-4-penten-2-one (4), which was one of a cluster of related ketones generated during the synthesis of 1-phenyl-2-propanone (P2P) from phenylacetic acid and lead (II) acetate. This two-step sequence resulted in methamphetamine containing elevated levels of 1. In contrast, methamphetamine produced from P2P made by other methods produced insignificant (ultra-trace or undetectable) amounts of 1. These results confirm that 1 is a synthetic marker compound for the phenylacetic acid and lead (II) acetate method. Analytical data for 1 and 4, and a postulated mechanism for the production of 4, are presented. Copyright © 2015 John Wiley & Sons, Ltd.

Forensic analysis of P2P derived amphetamine synthesis impurities: identification and characterization of indene by-products.

1-Phenyl-2-propanone (P2P) is an internationally monitored precursor that has become increasingly difficult for illicit amphetamine producers to source, which means that alternative routes to its preparation have become increasingly important. One such approach includes the hydrolysis of alpha-phenylacetoacetonitrile (APAAN) with sulfuric acid. Previously, we reported the identification of 4,6-dimethyl-3,5-diphenylpryid-2-one following implementation of hydrolysis conditions and it was proposed that this compound might serve as one route specific by-product in the APAAN to P2P conversion. This study continued to explore the presence of impurities formed during this conversion and expanded also into a second route of P2P synthesis starting from alpha-methylstyrene (AMS). All P2P products underwent the Leuckart procedure to probe the presence of P2P-related impurities that might have carried through to the final product. Two by-products associated with the APAAN hydrolysis route to P2P were identified as 2,3-diacetyl-2,3-diphenylsuccinonitrile (1) and 2-methyl-1-phenyl-1,3-dicarbonitrile-1H-indene (2), respectively. Two by-products associated with the AMS route to P2P and subsequent Leuckart reaction were 1,1,3-trimethyl-3-phenyl-2,3-dihydro-1H-indene (3) and 1-phenyl-N-(phenylethyl)propan-2-amine (4), respectively. The two indenes (2 and 3) identified in synthesized amphetamine originating from P2P suggested that it might be possible to differentiate between the two synthetic routes regarding the use of APAAN and AMS. Furthermore, the association of these compounds with amphetamine production appears to have been reported for the first time. The presence of compounds 1 - 4 in seized amphetamine samples and waste products could facilitate the suggestion whether APAAN or AMS were employed in the synthesis route to the P2P. Copyright © 2016 John Wiley & Sons, Ltd.

Regio- and Stereoselective Aliphatic-Aromatic Cross-Benzoin Reaction: Enzymatic Divergent Catalysis.

The catalytic asymmetric synthesis of chiral 2-hydroxy ketones by using different thiamine diphosphate dependent enzymes, namely benzaldehyde lyase from Pseudomonas fluorescens (PfBAL), a variant of benzoylformate decarboxylase from Pseudomonas putida (PpBFD-L461A), branched-chain 2-keto acid decarboxylase from Lactococcus lactis (LlKdcA) and a variant of pyruvate decarboxylase from Acetobacter pasteurianus (ApPDC-E469G), was studied. Starting with the same set of substrates, substituted benzaldehydes in combination with different aliphatic aldehydes, PfBAL and PpBFD-L461A selectively deliver the (R)- and (S)-2-hydroxy-propiophenone derivatives, respectively. The (R)- and (S)-phenylacetylcarbinol (1-hydroxy-1-phenylacetone) derivatives are accessible in a similar way using LlKdcA and ApPDC-E469G, respectively. In many cases excellent stereochemical purities (>98 % enantiomeric excess) could be achieved. Hence, the regio- and stereochemistry of the product in the asymmetric aliphatic-aromatic cross-benzoin reaction can be controlled solely by choice of the appropriate enzyme or enzyme variant.

Synthesis of a Bis-thio-acetone (BTA) Analogue of the Lysine Isopeptide Bond and its Application to Investigate the Effects of Ubiquitination and SUMOylation on α-Synuclein Aggregation and Toxicity.

The reversible modification of protein by the small protein ubiquitin and other ubiquitin-like modifiers plays important roles in virtually every key biological process in eukaryotic cells. The establishment of a range of chemical methods for the preparation of ubiquitinated proteins has enabled the site-specific interrogation of the consequences of these modifications. However, many of these techniques require significant levels of synthetic expertise, somewhat limiting their widespread application by the biological community. To overcome this issue, the creation of structural analogues of the ubiquitin-protein linkage that can be readily prepared with commercially available reagents and buffers is an important goal. Here we present the development of conditions for the facile synthesis of bis-thio-acetone (BTA) linkages of ubiquitinated proteins in high yields. Additionally, we apply this technique to the preparation of the aggregation prone protein α-synuclein bearing either ubiquitin or the small ubiquitin-like modifier (SUMO). With these proteins, we demonstrate that the BTA linkage recapitulates the previously published effects of either of these proteins on α-synuclein, suggesting that it is a good structural mimic. Notably, the BTA linkage is chemically and enzymatically stable, enabling us to study the consequences of site-specific ubiquitination and SUMOylation on the toxicity of α-synuclein in cell culture, which revealed modification and site-specific differences.

Identification of polymorphism in ethylone hydrochloride: synthesis and characterization.

Ethylone, a synthetic cathinone with psychoactive properties, is a designer drug which has appeared on the recreational drug market in recent years. Since 2012, illicit shipments of ethylone hydrochloride have been intercepted with increasing frequency at the Canadian border. Analysis has revealed that ethylone hydrochloride exists as two distinct polymorphs. In addition, several minor impurities were detected in some seized exhibits. In this study, the two conformational polymorphs of ethylone hydrochloride have been synthesized and fully characterized by FTIR, FT-Raman, powder XRD, GC-MS, ESI-MS/MS and NMR ((13) C CPMAS, (1) H, (13) C). The two polymorphs can be distinguished by vibrational spectroscopy, solid-state nuclear magnetic resonance spectroscopy and X-ray diffraction. The FTIR data are applied to the identification of both polymorphs of ethylone hydrochloride (mixed with methylone hydrochloride) in a laboratory submission labelled as 'Ocean Snow Ultra'. The data presented in this study will assist forensic scientists in the differentiation of the two ethylone hydrochloride polymorphs. This report, alongside our recent article on the single crystal X-ray structure of a second polymorph of this synthetic cathinone, is the first to confirm polymorphism in ethylone hydrochloride. © 2015 Canada Border Services Agency. Drug Testing and Analysis published by John Wiley & Sons, Ltd. © 2015 Canada Border Services Agency. Drug Testing and Analysis published by John Wiley & Sons, Ltd.

Synthesis of α-Acyloxyketone Derivatives via the Platinum-Catalyzed Migration of Propargylic Esters.

The synthesis of α-acyloxyketones via the migration of a propargylic ester followed by the intramolecular nucleophilic addition of the resulting allene was achieved using a cationic platinum catalyst. The optimized conditions for this transformation were determined to be 3 mol% of Pt(cod)Cl2, 3 mol% of AgNTf2, and 3 eq of water in toluene at 100 °C, and these conditions were successfully applied to the synthesis of a wide variety of α-aryl-α-acyloxyketones. The mechanism of this reaction was evaluated in detail based on the results of isotope labeling experiments using H2(18)O.

Heterofunctional Magnetic Metal-Chelate-Epoxy Supports for the Purification and Covalent Immobilization of Benzoylformate Decarboxylase From Pseudomonas Putida and Its Carboligation Reactivity.

In this study, the combined use of the selectivity of metal chelate affinity chromatography with the capacity of epoxy supports to immobilize poly-His-tagged recombinant benzoylformate decarboxylase from Pseudomonas putida (BFD, E.C. 4.1.1.7) via covalent attachment is shown. This was achieved by designing tailor-made magnetic chelate-epoxy supports. In order to selectively adsorb and then covalently immobilize the poly-His-tagged BFD, the epoxy groups (300 µmol epoxy groups/g support) and a very small density of Co(2+)-chelate groups (38 µmol Co(2+)/g support) was introduced onto magnetic supports. That is, it was possible to accomplish, in a simple manner, the purification and covalent immobilization of a histidine-tagged recombinant BFD. The magnetically responsive biocatalyst was tested to catalyze the carboligation reactions. The benzoin condensation reactions were performed with this simple and convenient heterogeneous biocatalyst and were comparable to that of a free-enzyme-catalyzed reaction. The enantiomeric excess (ee) of (R)-benzoin was obtained at 99 ± 2% for the free enzyme and 96 ± 3% for the immobilized enzyme. To test the stability of the covalently immobilized enzyme, the immobilized enzyme was reused in five reaction cycles for the formation of chiral 2-hydroxypropiophenone (2-HPP) from benzaldehyde and acetaldehyde, and it retained 96% of its original activity after five reaction cycles.

Inversion twinning in a second polymorph of the hydrochloride salt of the recreational drug ethylone.

A second polymorph of the hydrochloride salt of the recreational drug ethylone, C12H16NO3(+)·Cl(-), is reported [systematic name: (±)-2-ethylammonio-1-(3,4-methylenedioxyphenyl)propane-1-one chloride]. This polymorph, denoted form (A), appears in crystallizations performed above 308 K. The originally reported form (B) [Wood et al. (2015). Acta Cryst. C71, 32-38] crystallizes preferentially at room temperature. The conformations of the cations in the two forms differ by a 180° rotation about the C-C bond linking the side chain to the aromatic ring. Hydrogen bonding links the cations and anions in both forms into similar extended chains in which any one chain contains only a single enantiomer of the chiral cation, but the packing of the ions is different. In form (A), the aromatic rings of adjacent chains interleave, but pack equally well if neighbouring chains contain the same or opposite enantiomorph of the cation. The consequence of this is then near perfect inversion twinning in the structure. In form (B), neighbouring chains are always inverted, leading to a centrosymmetric space group. The question as to why the polymorphs crystallize at slightly different temperatures has been examined by density functional theory (DFT) and lattice energy calculations and a consideration of packing compactness. The free energy (ΔG) of the crystal lattice for polymorph (A) lies some 52 kJ mol(-1) above that of polymorph (B).

One-step synthesis of 1-chloro-3-arylacetone derivatives from arylacetic acids.

A practical one-step method has been developed to prepare α-chloroketones from readily available, inexpensive phenylacetic acid derivatives. The method utilizes the unique reactivity of an intermediate Mg-enolate dianion, which displays selectivity for the carbonyl carbon of chloromethyl carbonyl electrophiles. Decarboxylation of the intermediate occurs spontaneously during the reaction quench. The utility of the reaction products has been demonstrated through the total synthesis of the natural product cimiracemate B.

Chirally deuterated benzyl chlorides from benzyl alcohols via hexachloroacetone/polymer-supported triphenylphosphine: synthesis of protected (2S, 3S)-[3-(2)H, (15)N]-tyrosine.

Chirally deuterated benzyl chlorides were prepared using novel, general hexachloroacetone/polymer-supported triphenylphosphine treatment of chirally deuterated benzyl alcohols. Doubly labeled protected tyrosine was obtained in 62% yield with 86% de at the α-carbon and 82% de at the ß-carbon. Key in the synthesis was the alkylation of (15)N-labeled (-)-8-phenylmenthylhippurate with R-(-)-4-triisopropylsilyloxybenzyl-α-d chloride.

A synthetic approach to novel carvotacetone and antheminone analogues with anti-tumour activity.

A synthetic approach to analogues of the terpenoid natural product antheminone A is described which employs (-)-quinic acid as starting material. A key conjugate addition step proved to be unpredictable regarding its stereochemical outcome however the route allowed access to two diastereoisomeric series of compounds. The results of biological assay of the toxicity of the target compounds towards non-small-cell lung cancer cell line A549 are reported.

Nucleophilic trifluoromethylation of carbonyl compounds: trifluoroacetaldehyde hydrate as a trifluoromethyl source.

A feasible nucleophilic trifluoromethylating protocol has been developed using trifluoroacetaldehyde hydrate as an atom-economical trifluoromethyl source. The reaction was found to be applicable to the nucleophilic trifluoromethylation of a broad spectrum of carbonyl compounds with satisfactory yields in general. DFT calculations have been performed to provide mechanistic insight into the present and related reactions employing 2,2,2-trifluoro-1-methoxyethanol and hexafluoroacetone hydrate.

Highly enantioselective organocatalytic trifluoromethyl carbinol synthesis--a caveat on reaction times and product isolation.

Aldol reactions with trifluoroacetophenones as acceptors yield chiral α-aryl, α-trifluoromethyl tertiary alcohols, valuable intermediates in organic synthesis. Of the various organocatalysts examined, Singh's catalyst [(2S)-N-[(1S)-1-hydroxydiphenylmethyl-3-methylbutyl]-2-pyrrolidinecarboxamide] was found to efficiently promote this organocatalytic transformation in a highly enantioselective manner. Detailed reaction monitoring ((19)F-NMR, HPLC) showed that, up to full conversion, the catalytic transformation proceeds under kinetic control and affords up to 95% ee in a time-independent manner. At longer reaction times, the catalyst effects racemization. For the product aldols, even weak acids (such as ammonium chloride) or protic solvents, can induce racemization, too. Thus, acid-free workup, at carefully chosen reaction time, is crucial for the isolation of the aldols in high (and stable) enantiomeric purity. As evidenced by (19)F-NMR, X-ray structural analysis, and independent synthesis of a stable intramolecular variant, Singh's catalyst reversibly forms a catalytically inactive ("parasitic") intermediate, namely a N,O-hemiacetal with trifluoroacetophenones. X-ray crystallography also allowed the determination of the product aldols' absolute configuration (S).

Aminohydroxyacetone synthons: versatile intermediates for the organocatalytic asymmetric aldol reaction.

A practical method for the synthesis of 1,3-aminohydroxyacetone synthons was developed, and their utility in the organocatalytic asymmetric aldol reaction was demonstrated in a short synthesis of aza-sugars.

Synthesis and antimalarial activity of dihydroperoxides and tetraoxanes conjugated with bis(benzyl)acetone derivatives.

Dihydroperoxides and tetraoxanes derived from symmetrically substituted bis(arylmethyl)acetones were synthesized in modest to good yields using several methods. Three of these compounds exhibit an important in vitro antimalarial activity (1.0 µm ≤ IC(50) ≤ 5.0 µm) against blood forms of the human malaria parasite Plasmodium falciparum.