Biochemical and biophysical drivers of the hydrogen isotopic composition of carbohydrates and acetogenic lipids.

The hydrogen isotopic composition (δ2H) of plant compounds is increasingly used as a hydroclimatic proxy; however, the interpretation of δ2H values is hampered by potential coeffecting biochemical and biophysical processes. Here, we studied δ2H values of water and carbohydrates in leaves and roots, and of leaf n-alkanes, in two distinct tobacco (Nicotiana sylvestris) experiments. Large differences in plant performance and biochemistry resulted from (a) soil fertilization with varying nitrogen (N) species ratios and (b) knockout-induced starch deficiency. We observed a strong 2H-enrichment in sugars and starch with a decreasing performance induced by increasing NO3-/NH4+ ratios and starch deficiency, as well as from leaves to roots. However, δ2H values of cellulose and n-alkanes were less affected. We show that relative concentrations of sugars and starch, interlinked with leaf gas exchange, shape δ2H values of carbohydrates. We thus provide insights into drivers of hydrogen isotopic composition of plant compounds and into the mechanistic modeling of plant cellulose δ2H values.

Cultivation of novel Atribacterota from oil well provides new insight into their diversity, ecology, and evolution in anoxic, carbon-rich environments.

BACKGROUND: The Atribacterota are widely distributed in the subsurface biosphere. Recently, the first Atribacterota isolate was described and the number of Atribacterota genome sequences retrieved from environmental samples has increased significantly; however, their diversity, physiology, ecology, and evolution remain poorly understood. RESULTS: We report the isolation of the second member of Atribacterota, Thermatribacter velox gen. nov., sp. nov., within a new family Thermatribacteraceae fam. nov., and the short-term laboratory cultivation of a member of the JS1 lineage, Phoenicimicrobium oleiphilum HX-OS.bin.34TS, both from a terrestrial oil reservoir. Physiological and metatranscriptomics analyses showed that Thermatribacter velox B11T and Phoenicimicrobium oleiphilum HX-OS.bin.34TS ferment sugars and n-alkanes, respectively, producing H2, CO2, and acetate as common products. Comparative genomics showed that all members of the Atribacterota lack a complete Wood-Ljungdahl Pathway (WLP), but that the Reductive Glycine Pathway (RGP) is widespread, indicating that the RGP, rather than WLP, is a central hub in Atribacterota metabolism. Ancestral character state reconstructions and phylogenetic analyses showed that key genes encoding the RGP (fdhA, fhs, folD, glyA, gcvT, gcvPAB, pdhD) and other central functions were gained independently in the two classes, Atribacteria (OP9) and Phoenicimicrobiia (JS1), after which they were inherited vertically; these genes included fumarate-adding enzymes (faeA; Phoenicimicrobiia only), the CODH/ACS complex (acsABCDE), and diverse hydrogenases (NiFe group 3b, 4b and FeFe group A3, C). Finally, we present genome-resolved community metabolic models showing the central roles of Atribacteria (OP9) and Phoenicimicrobiia (JS1) in acetate- and hydrocarbon-rich environments. CONCLUSION: Our findings expand the knowledge of the diversity, physiology, ecology, and evolution of the phylum Atribacterota. This study is a starting point for promoting more incisive studies of their syntrophic biology and may guide the rational design of strategies to cultivate them in the laboratory. Video Abstract.

Complete genome sequence of a novel Pseudomonas sp. IT1137 isolated from Antarctic intertidal sediment showing potential for alkane degradation at low temperatures.

Pseudomonas species are known for their diverse metabolic abilities and broad ecological distribution. They are fundamental components of bacterial communities and perform essential ecological functions in the environment. A psychrotrophic Pseudomonas sp. IT1137 was isolated from intertidal sediment in the coastal region of the Fildes Peninsula, King George Island, Antarctica. The strain contained a circular chromosome of 5,346,697 bp with a G + C content of 61.66 mol% and one plasmid of 4481 bp with a G + C content of 64.61 mol%. A total of 4848 protein-coding genes, 65 tRNA genes and 15 rRNA genes were obtained. Genome sequence analysis revealed that strain IT1137 not only is a potentially novel species of the genus Pseudomonas but also harbors functional genes related to nitrogen, sulfur and phosphorus cycling. In addition, genes involved in alkane degradation, ectoine synthesis and cyclic lipopeptide (CLP) production were detected in the bacterial genome. The results indicate the potential of the strain Pseudomonas sp. IT1137 for biotechnological applications such as bioremediation and secondary metabolite production and are helpful for understanding bacterial adaptability and ecological function in cold coastal environments.

A microchip gas chromatography column assembly with a 3D metal printing micro column oven and a flexible stainless-steel column.

In this work, a microchip gas chromatography (GC) column assembly utilizing a three-dimensional (3D) printed micro oven and a flexible stainless steel capillary column was developed. The assembly's performance and separation capabilities were characterized. The key components include a 3D printed aluminum plate (7.50 × 7.50 × 0.16 cm) with a 3-meter-long circular spiral channel, serving as the oven, and the column coiled on the channel with an inner diameter of 320 µm and a stationary phase of OV-1. A heating ceramic plate was affixed on the opposite side of the plate. The assembly weighed 40.3 g. The design allows for easy disassembly, or stacking of heating devices and columns, enabling flexibility in adjusting column length. When using n-C13 as the test analyte at 140 °C, a retention factor (k) was 8.5, and 7797 plates (2599 plates/m) were obtained. The assembly, employing resistance heating, demonstrated effective separation performance for samples containing alkanes, aromatics, alcohols and ketones, with good reproducibility. The reduction in theoretical plates compared to oven heating was only 2.95 %. In the boiling point range of C6 to C18, rapid temperature programming (120 °C/min) was achieved with a power consumption of 119.512 W. The assembly was successfully employed to separate benzene series compounds, gasoline and volatile organic compounds (VOCs), demonstrating excellent separation performance. This innovative design addresses the challenges of the complexity and low repeatability of the fabrication process and the high cost associated with microchip columns. Furthermore, its versatility makes it suitable for outdoor analysis applications.

Dispersant addition, but not nutrients, stimulated blooms of multiple hydrocarbonoclastic genera in nutrient-replete coastal marine surface waters.

The range of impacts of chemical dispersants on indigenous marine microbial communities and their activity remains poorly constrained. We tested the response of nearshore surface waters chronically exposed to oil leakage from a downed platform and supplied with nutrients by the Mississippi River to Corexit dispersant and nutrient additions. As assessed using 14C-labeled tracers, hexadecane mineralization potential was orders of magnitude higher in all unamended samples than in previously assessed bathypelagic communities. Nutrient additions stimulated microbial mortality but did not affect community composition and had no generalizable effect on hydrocarbon mineralization potential. By contrast, Corexit amendments caused a rapid shift in community composition and a drawdown of inorganic nitrogen and orthophosphate though no generalizable effect on hydrocarbon mineralization potential. The hydrocarbonoclastic community's response to dispersants is largely driven by the relative availability of organic substrates and nutrients, underscoring the role of environmental conditions and multiple interacting stressors on hydrocarbon degradation potential.

Comprehensive study of retention influencing gas chromatographic parameters affecting linear retention indices.

Retention in gas chromatographic systems has a central role in the identification of compounds even if detectors providing spectral information are used. But linear retention indices (LRI) of a single compound originating from multiple sources tend to vary greatly, probably due to differences in the experimental settings of the determinations. The effect of gas chromatographic parameters on LRI has been investigated using 41 compounds - previously identified from food contact plastics - and n-alkanes (n-C7-n-C40) used as reference series. As the reproducibility of LRIs under the same conditions is generally very good, the smallest changes in the settings often caused statistically significant, though irrelevant changes in the LRI values. Therefore, a multicriterial scoring-ranking system has been worked out to highlight the LRI value differences. Our results highlight that column length, heating rate, and film thickness can all be the reasons of the varying published LRI values. We also demonstrated that for the reproduction of LRI data, the chemistry (and not simply the polarity) of the stationary phase is crucial.

Beyond methane, new frontiers in anaerobic microbial hydrocarbon utilizing pathways.

Alkanes, single carbon methane to long-chain hydrocarbons (e.g. hexadecane and tetradecane), are important carbon sources to anaerobic microbial communities. In anoxic environments, archaea are known to utilize and produce methane via the methyl-coenzyme M reductase enzyme (MCR). Recent explorations of new environments, like deep sea sediments, that have coupled metagenomics and cultivation experiments revealed divergent MCRs, also referred to as alkyl-coenzyme M reductases (ACRs) in archaea, with similar mechanisms as the C1 utilizing canonical MCR mechanism. These ACR enzymes have been shown to activate other alkanes such as ethane, propane and butane for subsequent degradation. The reversibility of canonical MCRs suggests that these non-methane-activating homologues (ACRs) might have similar reversibility, perhaps mediated by undiscovered lineages that produce alkanes under certain conditions. The discovery of these alternative alkane utilization pathways holds significant promise for a breadth of potential biotechnological applications in bioremediation, energy production and climate change mitigation.

Distribution, sources and ecological risks of PAHs and n-alkanes in water and sediments of typically polluted estuaries: Insights from the Xiaoqing River.

Seasonal water and sediment samples were collected from the Xiaoqing River estuary and the neighboring sea to study the spatial and temporal distributions, sources and ecological risks of polycyclic aromatic hydrocarbons (PAHs) and n-alkanes. The results showed significant spatial and temporal differences in the concentrations of PAHs and n-alkanes under the influence of precipitation, temperature, and human activities. The concentrations of PAHs in water were lower in the wet season than in the dry season, and those in sediments were higher in the wet season than in the dry season. The concentrations of n-alkanes were higher in the rainy season than in the dry season for both water and sediments. The spatial distributions of PAHs and n-alkanes were estuarine > offshore. The concentration ranges of ∑PAHs in water and sediments were 230.66-599.86 ng/L and 84.51-5548.62 ng/g, respectively, in the wet season and 192.46-8649.55 ng/L and 23.39-1208.92 ng/g, respectively, in the dry season. The proportion of three-ring PAHs in water (57.03% and 78.27% in the wet and dry seasons, respectively) was high, followed by two-ring PAHs (27.31% and 13.59% in the wet and dry seasons, respectively). The proportion of four-ring PAHs was higher in sediments (24.79% and 32.20% in the wet and dry seasons, respectively). The ecological risk of PAHs assessed using the toxicity equivalent quotient and risk quotient was at moderate to moderately high risk levels. The high concentration of n-alkane fraction C16 (611.65-75594.58 ng/L) in the water is indicative of petroleum or other fossil fuel inputs. The main peaks of n-alkanes in river sediments were C27, C29 and C31, indicating higher inputs of plant sources. The sediments in the estuary showed dominance of both short-chain C16 and long-chain C25-C31, indicating a combined input of higher plants and petroleum. The diagnostic ratios of PAHs and n-alkanes indicated that their sources were mainly oil/coal/biomass combustion and petroleum spills attributed to frequent vehicular, vessel and mariculture activities. Given the potential ecological risks of PAHs and n-alkanes in water and sediments, future studies should focus on their bioaccumulation and biotoxicity.

The petroleum ether extracts of Chloranthus fortunei(A. Gray) Solms-Laub.with bioactivities: A rising source in HCC drug treatment.

ETHNOPHARMACOLOGICAL RELEVANCE: Hepatocellular Carcinoma (HCC) is an aggressive killer worldwide with high incidence and mortality. The herb Chloranthus fortunei (A. Gray) Solms-Laub is known as "Si Ji Feng" and is classified as a Feng-type medicine in classic Yao medicines. According to Yao's medical beliefs, Chloranthus fortunei has the functions of dispelling Feng, regulating qi, detoxifying, promoting blood circulation, etc. Folk uses its decoctions to treat stagnant liver conditions, such as liver abscesses, cirrhosis, hepatitis, and liver cancer. However, the bioactivity and mechanisms of Chloranthus fortunei extract against HCC have not been reported. AIM OF THE STUDY: To investigate the anti-HCC bioactivity and potential mechanism of the extract of Chloranthus fortunei (CFS). MATERIALS AND METHODS: Using 70% ethanol for reflux extraction of CFS resulted in the CFS ethanol extract, followed by sequential extractions with petroleum ether, chloroform, ethyl acetate, and n-butanol, yielding four fractions. The CCK-8 assay was utilized to examine the cytotoxic effects of 4 fractions on MHCC97-H and HepG2 cells, exploring the most effective component, namely petroleum ether extracts of CFS (PECFS). The major active ingredients of PECFS were identified using LC/MS technology, and the impact on cell proliferation and apoptosis in HCC cells was studied. The key genes and proteins in the pathway were validated using RT-PCR and Western blotting. BALB/c nude mice were chosen for tumor xenotransplantation and PECFS therapy. hinders the proliferation of HCC cells and promotes apoptosis. RESULTS: Among the four fractions, it was found that PECFS have the highest antiproliferative activity against MHCC97-H and HepG2 cells (IC50 = 13.86, 10.55 µg/mL), with sesquiterpene compounds being the primary active constituents. The antiproliferative activity of PECFS on HCC cells was linked to the inhibition of cell cloning, invasion, and metastasis abilities, as well as the arrest of the cell cycle at the G2/M phase. Additionally, exerts pro-apoptotic effects on HCC cells by upregulating the pro-apoptotic protein Bax, downregulating the anti-apoptotic protein Bcl-2, and activating the expression of the Caspase family. Moreover, protein and m-RNA expression data showed that PECFS inhibits HCC cell proliferation and promotes apoptosis by regulating the PI3K/AKT/mTOR pathway. Besides, after PECFS treatment, tumor growth in nude mice was suppressed. CONCLUSION: PECFS can inhibit the viability of HCC cells by acting on the PI3K/AKT/mTOR pathway, demonstrating anti-tumor potential. This study's findings suggest that PECFS may represent a promising source of novel agents for liver cancer treatment, providing scientific evidence for the traditional application of CFS in treating HCC.

Discovery of petroleum ether extract of eclipta targeting p53/Fas pathway for the treatment of chemotherapy-induced alopecia: Network pharmacology and experimental validation.

ETHNOPHARMACOLOGICAL RELEVANCE: Ecliptea herba, a traditional Chinese herbal medicine for hair loss, was first recorded in the Tang Dynasty's 'Qian Jin Yue Ling', of which the active ingredients and mechanisms of action in the treatment of chemotherapy-induced hair loss remain poorly investigated. AIM OF THE STUDY: To investigate the effects of the petroleum ether extract of Eclipta (PEE) on alopecia and follicle damage and elucidate its potential therapeutic mechanisms using the integration of network pharmacology, bioinformatics, and experimental validation. MATERIALS AND METHODS: UPLC-MS was used to analyse the chemical composition of PEE. A network pharmacology approach was employed to establish the 'components-targets-pathways' network of PEE to explore potential therapeutic pathways and targets. Molecular docking was used for validation, and the mechanism of PEE in treating chemotherapy-induced alopecia (CIA) was elucidated using in vitro and in vivo on CIA models. RESULTS: UPLC-MS analysis of PEE revealed 185 components, while network pharmacology and molecular docking analyses revealed potential active compounds and their target molecules, suggesting the involvement of core genes, such as TP53, ESR1, AKT1, IL6, TNF, and EGFR. The key components included wedelolactone, dimethyl-wedelolactone, luteoloside, linarin, and hispidulin. In vivo, PEE promoted hair growth, restored the number of hair follicles, and reduced follicle apoptosis. Conversely, in vitro, PEE enhanced cell viability, reduced apoptosis, and protected HaCaT cells from damage induced by 4-hydroperoxycyclophosphamide (4-HC). CONCLUSIONS: PEE alleviated hair follicle damage in CIA mice by inhibiting the P53/Fas pathway, which may be associated with inhibiting hair follicle cell apoptosis. This study provides a novel therapeutic strategy for treating cyclophosphamide-induced hair loss.

The MATH test. A three-phase assay?

This study aimed to investigating the possible interference caused by glass test tubes on the quantification of bacterial adhesion to hydrocarbons by the MATH test. The adhesion of four bacteria to hexadecane and to glass test tubes was evaluated employing different suspending polar phases. The role of the ionic strength of the polar phase regarding adhesion to glassware was investigated. Within the conditions studied, Gram-positive bacteria adhered to both the test tube and the hydrocarbon regardless of the polar phase employed; meanwhile, Escherichia coli ATCC 25922 did not attach to either one. The capacity of the studied microorganisms to adhere to glassware was associated with their electron-donor properties. The ionic strength of the suspending media altered the patterns of adhesion to glass in a strain-specific manner by defining the magnitude of electrostatic repulsion observed between bacteria and the glass surface. This research demonstrated that glass test tubes may interact with suspended bacterial cells during the MATH test under specific conditions, which may lead to overestimating the percentage of adhesion to hydrocarbons and, thus, to erroneous values of cell surface hydrophobicity.

Protocol for preparation of electrifiable carbon membrane reactor for non-oxidative alkane dehydrogenation.

A membrane reactor (MR) offers a solution to overcome thermodynamic equilibrium limitations by enabling in situ product separation, enhancing product yields and energy efficiency. Here we present a protocol for synthesizing a carbon MR that couples a H2-permeable carbon molecular sieve hollow fiber membrane and a metal supported on zeolite catalyst for non-oxidative propane and ethane dehydrogenation. We describe steps for catalyst preparation, membrane fabrication, and MR construction. The as-developed MR has significant improvements in alkene yield and a record-high stability. For complete details on the use and execution of this protocol, please refer to Liu et al.1.

Air-liquid interface exposure of A549 human lung cells to characterize the hazard potential of a gaseous bio-hybrid fuel blend.

Gaseous and semi-volatile organic compounds emitted by the transport sector contribute to air pollution and have adverse effects on human health. To reduce harmful effects to the environment as well as to humans, renewable and sustainable bio-hybrid fuels are explored and investigated in the cluster of excellence "The Fuel Science Center" at RWTH Aachen University. However, data on the effects of bio-hybrid fuels on human health is scarce, leaving a data gap regarding their hazard potential. To help close this data gap, this study investigates potential toxic effects of a Ketone-Ester-Alcohol-Alkane (KEAA) fuel blend on A549 human lung cells. Experiments were performed using a commercially available air-liquid interface exposure system which was optimized beforehand. Then, cells were exposed at the air-liquid interface to 50-2000 ppm C3.7 of gaseous KEAA for 1 h. After a 24 h recovery period in the incubator, cells treated with 500 ppm C3.7 KEAA showed significant lower metabolic activity and cells treated with 50, 250, 500 and 1000 ppm C3.7 KEAA showed significant higher cytotoxicity compared to controls. Our data support the international occupational exposure limits of the single KEAA constituents. This finding applies only to the exposure scenario tested in this study and is difficult to extrapolate to the complex in vivo situation.

Simultaneous production of biosurfactant and extracellular unspecific peroxygenases by Moesziomyces aphidis XM01 enables an efficient strategy for crude oil degradation.

Crude oil is a hazardous pollutant that poses significant and lasting harm to human health and ecosystems. In this study, Moesziomyces aphidis XM01, a biosurfactant mannosylerythritol lipids (MELs)-producing yeast, was utilized for crude oil degradation. Unlike most microorganisms relying on cytochrome P450, XM01 employed two extracellular unspecific peroxygenases, MaUPO.1 and MaUPO.2, with preference for polycyclic aromatic hydrocarbons (PAHs) and n-alkanes respectively, thus facilitating efficient crude oil degradation. The MELs produced by XM01 exhibited a significant emulsification activity of 65.9% for crude oil and were consequently supplemented in an "exogenous MELs addition" strategy to boost crude oil degradation, resulting in an optimal degradation ratio of 72.3%. Furthermore, a new and simple "pre-MELs production" strategy was implemented, achieving a maximum degradation ratio of 95.9%. During this process, the synergistic up-regulation of MaUPO.1, MaUPO.1 and the key MELs synthesis genes contributed to the efficient degradation of crude oil. Additionally, the phylogenetic and geographic distribution analysis of MaUPO.1 and MaUPO.1 revealed their wide occurrence among fungi in Basidiomycota and Ascomycota, with high transcription levels across global ocean, highlighting their important role in biodegradation of crude oil. In conclusion, M. aphidis XM01 emerges as a novel yeast for efficient and eco-friendly crude oil degradation.

From Antagonism to Enhancement: Triton X-100 Surfactant Affects Phenanthrene Interfacial Biodegradation by Mycobacteria through a Shift in Uptake Mechanisms.

Polycyclic aromatic hydrocarbons (PAHs), as persistent environmental pollutants, often reside in nonaqueous-phase liquids (NAPLs). Mycobacterium sp. WY10, boasting highly hydrophobic surfaces, can adsorb to the oil-water interface, stabilizing the Pickering emulsion and directly accessing PAHs for biodegradation. We investigated the impact of Triton X-100 (TX100) on this interfacial uptake of phenanthrene (PHE) by Mycobacteria, using n-tetradecane (TET) and bis-(2-ethylhexyl) phthalate (DEHP) as NAPLs. Interfacial tension, phase behavior, and emulsion stability studies, alongside confocal laser scanning microscopy and electron microscope observations, unveiled the intricate interplay. In surfactant-free systems, Mycobacteria formed stable W/O Pickering emulsions, directly degrading PHE within the NAPLs because of their intimate contact. Introducing low-dose TX100 disrupted this relationship. Preferentially binding to the cells, the surfactant drastically increased the cell hydrophobicity, triggering desorption from the interface and phase separation. Consequently, PAH degradation plummeted due to hindered NAPL access. Higher TX100 concentrations flipped the script, creating surfactant-stabilized O/W emulsions devoid of interfacial cells. Surprisingly, PAH degradation remained efficient. This paradox can be attributed to NAPL emulsification, driven by the surfactant, which enhanced mass transfer and brought the substrate closer to the cells, despite their absence at the interface. This study sheds light on the complex effect of surfactants on Mycobacteria and PAH uptake, revealing an antagonistic effect at low concentrations that ultimately leads to enhanced degradation through emulsification at higher doses. These findings offer valuable insights into optimizing bioremediation strategies in PAH-contaminated environments.

The potential of Bacillus species isolated from Cinnamomum camphora for biofuel production.

BACKGROUND: Increasing concerns about climate change and global petroleum supply draw attention to the urgent need for the development of alternative methods to produce fuels. Consequently, the scientific community must devise novel ways to obtain fuels that are both sustainable and eco-friendly. Bacterial alkanes have numerous potential applications in the industry sector. One significant application is biofuel production, where bacterial alkanes can serve as a sustainable eco-friendly alternative to fossil fuels. This study represents the first report on the production of alkanes by endophytic bacteria. RESULTS: In this study, three Bacillus species, namely Bacillus atrophaeus Camph.1 (OR343176.1), Bacillus spizizenii Camph.2 (OR343177.1), and Bacillus aerophilus Camph.3 (OR343178.1), were isolated from the leaves of C. camphora. The isolates were then screened to determine their ability to produce alkanes in different culture media including nutrient broth (NB), Luria-Bertani (LB) broth, and tryptic soy broth (TSB). Depending on the bacterial isolate and the culture media used, different profiles of alkanes ranging from C8 to C31 were detected. CONCLUSIONS: The endophytic B. atrophaeus Camph.1 (OR343176.1), B. spizizenii Camph.2 (OR343177.1), and B. aerophilus Camph.3 (OR343178.1), associated with C. camphora leaves, represent new eco-friendly approaches for biofuel production, aiming towards a sustainable future. Further research is needed to optimize the fermentation process and scale up alkane production by these bacterial isolates.

IGC investigation of the effect of the length of the n-alkyl substituent in 5-alkylsubstituted norbornenes on solute retention.

Polymerization of 5-n-alkyl-substituted 2-norbornenes synthesized a series of polymers having the same structure of the main polymer chain, but differing in the length of the alkyl substituent (up to 14 methylene units). The obtained polymers were studied by the capillary IGC method as a stationary phase during separation of a mixture of normal hydrocarbons C6-C10. Retention data in the form of a logarithm of the retention factor lnk were correlated with the size of the sorbate (via the carbon number of the alkane ZS) and with the size of the n-alkyl substituent in the polymer chain (via the carbon number of the polymer ZP). Correlation of lnk vs. ZS turned out to be linear for all polymers, but the angle of the slope of linear dependence dlnk/dZS increases with a decrease in the carbon number of the polymer ZP. Dependency of dlnk/dZS vs. ZP is not linear and indicates an increase in the retention of sorbates by the stationary phase with a decrease in the length of the alkyl substituent in the polymer chain. The correlation of the retention of lnk analytes with the carbon number of the polymer ZP is not linear and indicates an increase in the sorbate/sorbent interaction with a decrease in the length of the alkyl substituent. Inflection points were found at both correlations with ZP in the region of ZP = 8, which indicates a possible change in the sorption mechanism or a change in the phase state of the polymer. In polymer chemistry, the phase state of a polymer is characterized by the glass transition temperature Tg, the dependence of which vs. ZP turned out to be nonlinear with an inflection point at ZP ∼11. Thus, a decrease in the length of the alkyl substituent leads to the transition of the polymer from a rubbery state to a glassy one at ZP ∼ 11, which in turn, with a further decrease in the carbon number of the polymer to ZP ∼ 8, causes a change in the sorption mechanism from bulk sorption to surface sorption. The change in the sorption mechanism is accompanied by an increase in the interaction of the sorbate with the stationary phase, which manifests itself both in an increase in the retention time of analytes and in an increase in the enthalpy and entropy of sorption. The reason for this increase can be seen in the formation of a microporous structure in 5-alkyl-substituted polynorbornenes in a glassy state.

Regiodivergent biosynthesis of bridged bicyclononanes.

Medicinal compounds from plants include bicyclo[3.3.1]nonane derivatives, the majority of which are polycyclic polyprenylated acylphloroglucinols (PPAPs). Prototype molecules are hyperforin, the antidepressant constituent of St. John's wort, and garcinol, a potential anticancer compound. Their complex structures have inspired innovative chemical syntheses, however, their biosynthesis in plants is still enigmatic. PPAPs are divided into two subclasses, named type A and B. Here we identify both types in Hypericum sampsonii plants and isolate two enzymes that regiodivergently convert a common precursor to pivotal type A and B products. Molecular modelling and substrate docking studies reveal inverted substrate binding modes in the two active site cavities. We identify amino acids that stabilize these alternative binding scenarios and use reciprocal mutagenesis to interconvert the enzymatic activities. Our studies elucidate the unique biochemistry that yields type A and B bicyclo[3.3.1]nonane cores in plants, thereby providing key building blocks for biotechnological efforts to sustainably produce these complex compounds for preclinical development.

An integrated evaluation of bioenhanced in situ LNAPL dissolution.

Performance evaluation of in situ bioremediation processes in the field is difficult due to uncertainty created by matrix and contaminant heterogeneity, inaccessibility to direct observation, expense of sampling, and limitations of some measurements. The goal of this research was to develop a strategy for evaluating in situ bioremediation of light nonaqueous-phase liquid (LNAPL) contamination and demonstrating the occurrence of bioenhanced LNAPL dissolution by: (1) integrating a suite of analyses into a rational evaluation strategy; and (2) demonstrating the strategy's application in intermediate-scale flow-cell (ISFC) experiments simulating an aquifer contaminated with a pool of LNAPL (naphthalene dissolved in dodecane). Two ISFCs were operated to evaluate how the monitored parameters changed between a "no bioremediation" scenario and an "intrinsic in situ bioremediation" scenario. Key was incorporating different measures of microbial activity and contaminant degradation relevant to bioremediation: contaminant loss; consumption of electron acceptors; and changes in total alkalinity, pH, dissolved total inorganic carbon, carbon-stable isotopes, microorganisms, and intermediate metabolites. These measurements were integrated via mass-flux modeling and mass-balance analyses to document that in situ biodegradation of naphthalene was strongly accelerated in the "intrinsic in situ bioremediation" scenario versus "no bioremediation." Furthermore, the integrated strategy provided consistent evidence of bioenhancement of LNAPL dissolution through intrinsic bioremediation by a factor of approximately 2 due to the biodegradation of the naphthalene near the pool/water interface.

Archaea oxidizing alkanes through alkyl-coenzyme M reductases.

This review synthesizes recent discoveries of novel archaea clades capable of oxidizing higher alkanes, from volatile ones like ethane to longer-chain alkanes like hexadecane. These archaea, termed anaerobic multicarbon alkane-oxidizing archaea (ANKA), initiate alkane oxidation using alkyl-coenzyme M reductases, enzymes similar to the methyl-coenzyme M reductases of methanogenic and anaerobic methanotrophic archaea (ANME). The polyphyletic alkane-oxidizing archaea group (ALOX), encompassing ANME and ANKA, harbors increasingly complex alkane degradation pathways, correlated with the alkane chain length. We discuss the evolutionary trajectory of these pathways emphasizing metabolic innovations and the acquisition of metabolic modules via lateral gene transfer. Additionally, we explore the mechanisms by which archaea couple alkane oxidation with the reduction of electron acceptors, including electron transfer to partner sulfate-reducing bacteria (SRB). The phylogenetic and functional constraints that shape ALOX-SRB associations are also discussed. We conclude by highlighting the research needs in this emerging research field and its potential applications in biotechnology.