Adsorption-desorption of 241Am(â ¢) on montmorillonite colloids and quartz sand: Effects of pH, ionic strength, colloid concentration and grain size.

Clay colloids in the subsurface environment have a strong adsorption capacity for radionuclides, and the mobile colloids will carry the nuclides for migration, which would promote the movability of radionuclides in the groundwater environment and pose a threat to the ecosphere. The investigations of the adsorption/desorption behaviors of radionuclides in colloids and porous media are significant for the evaluation of the geological disposal of radioactive wastes. To illustrate the adsorption/desorption behaviors of 241Am(Ⅲ) in Na-montmorillonite colloid and/or quartz sand systems at different pH (5, 7 and 9), ionic strengths (0, 0.1 and 5 mM), colloid concentrations (300 and 900 mg/L), nuclide concentrations (500, 800, 1100 and 1400 Bq/mL) and grain sizes (40 and 60 mesh), a series of batch sorption-desorption experiments were conducted. Combining the analysis of the physical and chemical properties of Na-montmorillonite with the Freundlich model, the influencing mechanism of different controlling factors is discussed. The experimental results show that the adsorption/desorption behaviors of 241Am(Ⅲ) in Na-montmorillonite colloid and/or quartz sand strongly are influenced by the pH value and ionic strength of a solution, the colloid concentration as well as quartz sand grain size. The adsorption and desorption isotherms within all the experimental conditions could be well-fitted by the Freundlich model and the correlation coefficients (R2) are bigger than 0.9. With the increase in pH, the adsorption partition coefficient (Kd) at 241Am(Ⅲ)-Na-montmorillonite colloid two-phase system and 241Am(Ⅲ)-Na-montmorillonite colloid-quartz sand three-phase system presents a trend which increases firstly followed by decreasing, due to the changes in the morphology of Am with pH. The Kd of 241Am(Ⅲ) adsorption on montmorillonite colloid and quartz sand decreases with increasing in ionic strength, which is mainly attributed to the competitive adsorption, surface complexation and the reduction of surface zeta potential. Additionally, the Kd increases with increasing colloid concentrations because of the increase in adsorption sites. When the mean grain diameter changes from 0.45 to 0.3 mm, the adsorption variation trends of 241Am(Ⅲ) remain basically unchanged. The research results obtained in this work are meaningful and helpful in understanding the migration behaviors of radionuclides in the underground environment.

Co-transport behavior of Am(III) and natural colloids in the vadose zone sediments.

Americium (III) (Am(III)) in the natural environment is considered immobile due to its low solubility, strong adsorption, and high affinity to solid surfaces. However, the presence of natural colloids may carry Am(III) transport for long distance. The individual and co-transport behaviors of Am(III) and natural colloids through the unsaturated packed columns were investigated under the influence of pH, electrolyte concentration, velocity, Am(III) concentration and natural colloids concentration. Under all experimental conditions, Am(III) individual transport construct sight breakthrough curves (BTCs, CAm/C0 < 3%), but the presence of natural colloids increased the BTCs plateau of Am(III) significantly (30% < CAm/C0 < 80%), indicating that the colloids were able to promote Am(III) transport in the unsaturated porous media. DLVO theoretical calculations reveal that the increased pH and decreased electrolyte concentration lead to a rase in electrostatic repulsion, and the natural colloids tend to be dispersed and stabilized, which facilitates elution. In addition to this, the increase of velocity and colloids concentration will lead to greater breakthrough of natural colloids. The non-equilibrium two-site model and the two-site kinetic retention model well-described the BTCs of Am(III) and natural colloids, respectively. This study provide new insights into the behavior of natural colloids carrying the Am(III) into aquifers through the vadose zone sediments.

Advancing the Am Extractant Design through the Interplay among Planarity, Preorganization, and Substitution Effects.

Advancing the field of chemical separations is important for nearly every area of science and technology. Some of the most challenging separations are associated with the americium ion Am(III) for its extraction in the nuclear fuel cycle, 241Am production for industrial usage, and environmental cleanup efforts. Herein, we study a series of extractants, using first-principle calculations, to identify the electronic properties that preferentially influence Am(III) binding in separations. As the most used extractant family and because it affords a high degree of functionalization, the polypyridyl family of extractants is chosen to study the effects of the planarity of the structure, preorganization of coordinating atoms, and substitution of various functional groups. The actinyl ions are used as a structurally simplified surrogate model to quickly screen the most promising candidates that can separate these metal ions. The down-selected extractants are then tested for the Am(III)/Eu(III) system. Our results show that π interactions, especially those between the central terpyridine ring and Am(III), play a crucial role in separation. Adding an electron-donating group onto the terpyridine backbone increases the binding energies to Am(III) and stabilizes Am-terpyridine coordination. Increasing the planarity of the extractant increases the binding strength as well, although this effect is found to be rather weak. Preorganizing the coordinating atoms of an extractant to their binding configuration as in the bound metal complex speeds up the binding process and significantly improves the kinetics of the separation process. This conclusion is validated by the synthesized 1,2-dihydrodipyrido[4,3-b;5,6-b]acridine (13) extractant, a preorganized derivative of the terpyridine extractant, which we experimentally showed was four times more effective than terpyridine at separating Am3+ from Eu3+ (SFAm/Eu ∼ 23 ± 1).

Rapid separation of americium from complex matrices using solvent impregnated triazine extraction chromatography resins.

Several novel extraction chromatography resins (EXC) have been synthesised by solvent impregnation of the triazine ligands 6,6'-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydrobenzo[1,2,4]triazin-3-yl)-2,2'-bipyridine (CyMe4BTBP) and 2,9-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo[1,2,4]triazin-3-yl)-1,10-phenanthroline (CyMe4BTPhen) into Amberlite XAD7 and Amberchrom CG300 polymer supports. The resins have been physically characterised by a suite of spectroscopic, analytical and imaging techniques. The resins have also been evaluated in terms of their ability to selectively extract americium from complex matrices intended to simulate those typical of spent nuclear fuel raffinate, environmental samples and nuclear forensics samples. The resins have been compared with previously reported attempts to generate EXC resins based on CyMe4BTBP and CyMe4BTPhen. Previously reported resins all rely on complex synthesis for the formation of a covalent bond between extractant and support by contrast with the simpler solvent impregnation method reported here. The Amberchrom supported CyMe4BTBP resin achieved a weight distribution ration (DAm) of 170 within 60 min and a decontamination factor (DF) of >1000 for americium over lanthanides by column chromatography. The Amberchrom CyMe4BTPhen resin achieved a DAm of 540 within 30 min and a DF for americium from lanthanides of 60-160.

In vitro evidence of the influence of complexation of Pu and Am on uptake by human lung epithelial cells Calu-3.

Understanding the mechanisms involved in retention and clearance of actinides from the lungs after accidental intake is essential for the evaluation of the associated radiological risks. Although the absorption of radioelements has been shown in vivo to depend on their nature and physico-chemical properties, their mechanisms of translocation remain unknown. In this study, we have evaluated in vitro the binding and uptake by bronchial epithelial cells Calu-3 of 2 transuranic actinides, plutonium (Pu) and americium (Am), as the first steps of translocation across the pulmonary barrier. For this purpose, Calu-3 cells grown to confluence in 24-well plates were exposed to the radioelements for 24 h under various culture conditions. Two compartments were identified for the association of actinides to cells, corresponding to the membrane bound and internalized fractions. Binding of Pu was slightly higher than of Am, and depended on its initial chemical form (nitrate, citrate, colloids). Uptake of Pu and Am nitrate was higher in serum-free conditions than in supplemented medium, with an active mechanism involved in Pu internalization. Overall, our results suggest that complexation of actinides to bioligands may have an influence on their uptake by pulmonary epithelial cells, and therefore possibly on their subsequent absorption into blood.

Characterization of Americium and Curium Complexes with the Protein Lanmodulin: A Potential Macromolecular Mechanism for Actinide Mobility in the Environment.

Anthropogenic radionuclides, including long-lived heavy actinides such as americium and curium, represent the primary long-term challenge for management of nuclear waste. The potential release of these wastes into the environment necessitates understanding their interactions with biogeochemical compounds present in nature. Here, we characterize the interactions between the heavy actinides, Am3+ and Cm3+, and the natural lanthanide-binding protein, lanmodulin (LanM). LanM is produced abundantly by methylotrophic bacteria, including Methylorubrum extorquens, that are widespread in the environment. We determine the first stability constant for an Am3+-protein complex (Am3LanM) and confirm the results with Cm3LanM, indicating a ∼5-fold higher affinity than that for lanthanides with most similar ionic radius, Nd3+ and Sm3+, and making LanM the strongest known heavy actinide-binding protein. The protein's high selectivity over 243Am's daughter nuclide 239Np enables lab-scale actinide-actinide separations as well as provides insight into potential protein-driven mobilization for these actinides in the environment. The luminescence properties of the Cm3+-LanM complex, and NMR studies of Gd3+-LanM, reveal that lanmodulin-bound f-elements possess two coordinated solvent molecules across a range of metal ionic radii. Finally, we show under a wide range of environmentally relevant conditions that lanmodulin effectively outcompetes desferrioxamine B, a hydroxamate siderophore previously proposed to be important in trivalent actinide mobility. These results suggest that natural lanthanide-binding proteins such as lanmodulin may play important roles in speciation and mobility of actinides in the environment; it also suggests that protein-based biotechnologies may provide a new frontier in actinide remediation, detection, and separations.

Comparative uptake studies on trivalent f-cations from acidic feeds using two extraction chromatography resins containing a diglycolamide in molecular diluent and ionic liquid.

Low molecular weight diglycolamide (DGA) extractants were tested for the extraction of europium(III) and americium(III) from nitric acid solutions in n-dodecane, a molecular diluent and 1-butyl-3-methylimidazolium bis(trifluoromethanesulphonyl) imide (C4mim⋅NTf2), a room temperature ionic liquid, as the diluents. N,N,N',N'-tetra-n-butyl diglycolamide (TBDGA) was selected for extraction chromatography (XC) studies involving Eu(III) and Am(III). While the TBDGA resin containing n-dodecane gave reasonably high Kd values, that containing the ionic liquid showed higher Eu(III) uptake values. Compared to Eu(III), Am(III) was extracted by the resins to a lower extent. The loaded Eu(III) was back extracted from the resin using 0.05 M EDTA solutions in a buffered medium containing 1 M guanidine carbonate. Reusability studies indicated that, while the ionic liquid-based resin can be conveniently recycled five times with very marginal decrease in the percentage extraction values, there was a sharp decrease in the percent extraction after three cycles with the n-dodecane-based resin. The uptake data was fitted into different isotherm models and the results conformed to the Langmuir model. Based on the batch uptake studies, columns were prepared and the breakthrough as well as elution profiles were obtained. The elution profiles were found to be sharp without any significant tailing.

Chelation Modeling: The Use of Ad Hoc Models and Approaches to Overcome a Dose Assessment Challenge.

Chelating agents are administered to treat significant intakes of radioactive elements such as plutonium, americium, and curium. These drugs may be used as a medical countermeasure after radiological accidents and terrorist acts. The administration of a chelating agent, such as Ca-DTPA or Zn-DTPA, affects the actinide's normal biokinetics. It enhances the actinide's rate of excretion, posing a dose assessment challenge. Thus, the standard biokinetic models cannot be directly applied to the chelation-affected bioassay data in order to assess the radiation dose. The present study reviews the scientific literature, from the early 1970s until the present, on the different studies that focused on developing new chelation models and/or modeling of bioassay data affected by chelation treatment. Although scientific progress has been achieved, there is currently no consensus chelation model available, even after almost 50 y of research. This review acknowledges the efforts made by different research groups, highlighting the different methodology used in some of these studies. Finally, this study puts into perspective where we were, where we are, and where we are heading in regards to chelation modeling.

Advancing Chelation Chemistry for Actinium and Other +3 f-Elements, Am, Cm, and La.

A major chemical challenge facing implementation of 225Ac in targeted alpha therapy-an emerging technology that has potential for treatment of disease-is identifying an 225Ac chelator that is compatible with in vivo applications. It is unclear how to tailor a chelator for Ac binding because Ac coordination chemistry is poorly defined. Most Ac chemistry is inferred from radiochemical experiments carried out on microscopic scales. Of the few Ac compounds that have been characterized spectroscopically, success has only been reported for simple inorganic ligands. Toward advancing understanding in Ac chelation chemistry, we have developed a method for characterizing Ac complexes that contain highly complex chelating agents using small quantities (µg) of 227Ac. We successfully characterized the chelation of Ac3+ by DOTP8- using EXAFS, NMR, and DFT techniques. To develop confidence and credibility in the Ac results, comparisons with +3 cations (Am, Cm, and La) that could be handled on the mg scale were carried out. We discovered that all M3+ cations (M = Ac, Am, Cm, La) were completely encapsulated within the binding pocket of the DOTP8- macrocycle. The computational results highlighted the stability of the M(DOTP)5- complexes.

Reassessment of Resuspension Factor Following Radionuclide Dispersal: Toward a General-purpose Rate Constant.

A recent analysis of historical radionuclide resuspension datasets confirmed the general applicability of the Anspaugh and modified Anspaugh models of resuspension factors following both controlled and disastrous releases. While observations appear to have larger variance earlier in time, previous studies equally weighted the data for statistical fit calculations; this could induce a positive skewing of resuspension coefficients in the early time-period. A refitting is performed using a relative instrumental weighting of the observations. Measurements within a 3-d window are grouped into singular sample sets to construct standard deviations. The resulting best-fit equations produce tamer exponentials, which give decreased integrated resuspension factor values relative to those reported by Anspaugh. As expected, the fits attenuate greater error among the data at earlier time. The reevaluation provides a sharper contrast between the empirical models and reaffirms their deficiencies in the short-lived timeframe wherein the dynamics of particulate dispersion dominate the resuspension process.

Covalency in Americium(III) Hexachloride.

Developing a better understanding of covalency (or orbital mixing) is of fundamental importance. Covalency occupies a central role in directing chemical and physical properties for almost any given compound or material. Hence, the concept of covalency has potential to generate broad and substantial scientific advances, ranging from biological applications to condensed matter physics. Given the importance of orbital mixing combined with the difficultly in measuring covalency, estimating or inferring covalency often leads to fiery debate. Consider the 60-year controversy sparked by Seaborg and co-workers ( Diamond, R. M.; Street, K., Jr.; Seaborg, G. T. J. Am. Chem. Soc. 1954 , 76 , 1461 ) when it was proposed that covalency from 5f-orbitals contributed to the unique behavior of americium in chloride matrixes. Herein, we describe the use of ligand K-edge X-ray absorption spectroscopy (XAS) and electronic structure calculations to quantify the extent of covalent bonding in-arguably-one of the most difficult systems to study, the Am-Cl interaction within AmCl63-. We observed both 5f- and 6d-orbital mixing with the Cl-3p orbitals; however, contributions from the 6d-orbitals were more substantial. Comparisons with the isoelectronic EuCl63- indicated that the amount of Cl 3p-mixing with EuIII 5d-orbitals was similar to that observed with the AmIII 6d-orbitals. Meanwhile, the results confirmed Seaborg's 1954 hypothesis that AmIII 5f-orbital covalency was more substantial than 4f-orbital mixing for EuIII.

From early prophylaxis to delayed treatment: Establishing the plutonium decorporation activity window of hydroxypyridinonate chelating agents.

The potential consequences of a major radiological event are not only large-scale external radiation exposure of the population, but also uncontrolled dissemination of, and internal contamination with, radionuclides. When planning an emergency response to radiological and nuclear incidents, one must consider the need for not only post-exposure treatment for contaminated individuals, but also prophylactic measures to protect the workforce facing contaminated areas and patients in the aftermath of such events. In addition to meeting the desired criteria for post-exposure treatments such as safety, ease of administration, and broad-spectrum efficacy against multiple radionuclides and levels of challenge, ideal prophylactic countermeasures must include rapid onset; induce minimal to no performance-decrementing side effects; be compatible with current military Chemical, Biological, Radiological, Nuclear, and Explosive countermeasures; and require minimal logistical burdens. Hydroxypyridinone-based actinide decorporation agents have shown the most promise as decorporation strategies for various radionuclides of concern, including the actinides plutonium and americium. The studies presented here probe the extent of plutonium decorporation efficacy for two chelating agents, 3,4,3-LI(1,2-HOPO) and 5-LIO(Me-3,2-HOPO), from early pre-exposure time points to a delay of up to 7 days in parenteral or oral treatment administration, i.e., well beyond the initial hours of emergency response. Despite delayed treatment after a contamination event, both ligands clearly enhanced plutonium elimination through the investigated 7-day post-treatment period. In addition, a remarkable prophylactic efficacy was revealed for 3,4,3-LI(1,2-HOPO) with treatment as early as 48 h before the plutonium challenge. This work provides new perspectives in the indication and use of experimental actinide decorporation treatments.

Penetration and decontamination of americium-241 ex vivo using fresh and frozen pig skin.

Skin contamination is one of the most probable risks following major nuclear or radiological incidents. However, accidents involving skin contamination with radionuclides may occur in the nuclear industry, in research laboratories and in nuclear medicine departments. This work aims to measure the penetration of the radiological contaminant Americium (241Am) in fresh and frozen skin and to evaluate the distribution of the contamination in the skin. Decontamination tests were performed using water, Fuller's earth and diethylene triamine pentaacetic acid (DTPA), which is the recommended treatment in case of skin contamination with actinides such as plutonium or americium. To assess these parameters, we used the Franz cell diffusion system with full-thickness skin obtained from pigs' ears, representative of human skin. Solutions of 241Am were deposited on the skin samples. The radioactivity content in each compartment and skin layers was measured after 24 h by liquid scintillation counting and alpha spectrophotometry. The Am cutaneous penetration to the receiver compartment is almost negligible in fresh and frozen skin. Multiple washings with water and DTPA recovered about 90% of the initial activity. The rest remains fixed mainly in the stratum corneum. Traces of activity were detected within the epidermis and dermis which is fixed and not accessible to the decontamination.

The Impact of Time on Decorporation Efficacy After a "Dirty Bomb" Attack Studied by Simulation.

Background: In the case of a nuclear or radiological incident, there is a risk of external and internal contamination with radionuclides in addition to external irradiation. There is no consensus whether decorporation treatment should be initiated right away on spec or pending the results of internal dosimetry to determine the indication. Method: Based on biokinetic models for plutonium-239, americium-241 and cesium-137, the efficacy of a decorporation treatment using DTPA or Prussian blue was simulated depending on the initiation time and the duration of treatment for different invasion pathways and physicochemical properties of the inhaled compounds. Results: For the same level of radioactivity incorporated, the committed effective dose increases with the speed of the invasion process. The impact of the initiation time of a decorporation treatment is particularly important when the absorption of the radionuclide is fast. Even if started early after incorporation, the therapeutic efficacy is less for americium-241 or cesium-137 compared to plutonium-239. Therapeutic efficacy increases with treatment duration up to about 90 days for plutonium-239 and cesium-137, whereas a prolongation of the treatment over this limit may further enhance efficacy in the case of americium-241. Conclusion: In the case of a nuclear incident, several fractions with different but a priori unknown physicochemical properties may be inhaled. Thus, decorporation therapy should be started as soon as possible after the incorporation of the radionuclide(s), as a loss of efficacy caused by a delay of treatment initiation possibly cannot be compensated later on. Treatment should be pursued for several months.

Forecasting the In Vivo Behavior of Radiocontaminants of Unknown Physicochemical Properties Using a Simple In Vitro Test.

An understanding of the "bioavailability" of disseminated radiocontaminants is a necessary adjunct in order to tailor treatment and to calculate dose. A simple test has been designed to predict the bioavailability of different actinide forms likely to be found after dissemination of radioactive elements by dispersal devices or nuclear reactor incidents. Plutonium (Pu) or Americium (Am) nitrate or MOX (U,PuO2) are immobilized in culture wells using a static gel phase simulating biological compartments (lung, wound, etc.). Gels are incubated in a fluid phase representing physiological media (plasma, sweat, etc.). Transfer of radionuclide from static to fluid phase reflects contaminant bioavailability. After 48 h of incubation in physiological saline, Am transfer from static to fluid phase was greater than for Pu (70% vs. 15% of initial activity). Transfer of Pu or Am was markedly less from the oxide form of the two elements (1% Am and 0.05% Pu transferred). Medium representing intracellular lysosomal fluid (pH 4) increased transfer of Pu and Am, whereas culture medium including serum reduced actinide transfer. Actinide transfer was also reduced by elements of the extracellular matrix present in the static gel phase. Increasing DTPA concentrations (5 to 500 µM) to the fluid phase significantly enhanced transfer of Pu and Am. Although this agarose gel cannot fully represent in vivo complexity, this simple test can be used to investigate and predict the behavior in vivo of radiocontaminants to support medical treatments and medical forensic investigations.

Synthesis and Physicochemical Characterization of a Diethyl Ester Prodrug of DTPA and Its Investigation as an Oral Decorporation Agent in Rats.

The increasing threats of nuclear terrorism have made the development of medical countermeasures a priority for international security. Injectable formulations of diethylenetriaminepentaacetic acid (DTPA) have been approved by the FDA; however, an oral formulation is more amenable in a mass casualty situation. Here, the diethyl ester of DTPA, named C2E2, is investigated for potential as an oral treatment for internal radionuclide contamination. C2E2 was synthesized and characterized using NMR, MS, and elemental analysis. The physiochemical properties of solubility, lipophilicity, and stability were investigated in order to predict its oral bioavailability. Finally, an animal efficacy study was conducted in Sprague Dawley rats pre-contaminated by intramuscular injection with (241)Am(NO3)3 to establish effectiveness of the therapy via the oral route. Synthesis of C2E2 yielded a crystalline powder with high solubility and improved lipophilicity over DTPA. The ester was stable in both simulated gastric and intestinal fluids over the anticipated time course of absorption. Capsules containing C2E2 were demonstrated to be stable for 12 months under accelerated stability conditions. After a single dose, C2E2 enhanced the elimination of (241)Am in a dose-dependent manner. Significant improvement was seen in both total (241)Am decorporation and reduction of (241)Am liver and skeletal burden. C2E2 was concluded to be effective when orally administered to (241)Am-contaminated rats. It may therefore have potential for medical countermeasure in treating humans contaminated with (241)Am or other transuranic elements. An oral capsule or powder for reconstitution may be suitable formulations for future development based on the physiochemical properties and anticipated dose required for efficacy.

Design of an explosive detection system using Monte Carlo method.

Regardless the motivation terrorism is the most important risk for the national security in many countries. Attacks with explosives are the most common method used by terrorists. Therefore several procedures to detect explosives are utilized; among these methods are the use of neutrons and photons. In this study the Monte Carlo method an explosive detection system using a 241AmBe neutron source was designed. In the design light water, paraffin, polyethylene, and graphite were used as moderators. In the work the explosive RDX was used and the induced gamma rays due to neutron capture in the explosive was estimated using NaI(Tl) and HPGe detectors. When light water is used as moderator and HPGe as the detector the system has the best performance allowing distinguishing between the explosive and urea. For the final design the Ambient dose equivalent for neutrons and photons were estimated along the radial and axial axis.

Speciation of americium in seawater and accumulation in the marine sponge Aplysina cavernicola.

The fate of radionuclides in the environment is a cause of great concern for modern society, seen especially in 2011 after the Fukushima accident. Among the environmental compartments, seawater covers most of the earth's surface and may be directly or indirectly impacted. The interaction between radionuclides and the marine compartment is therefore essential for better understanding the transfer mechanisms from the hydrosphere to the biosphere. This information allows for the evaluation of the impact on humans via our interaction with the biotope that has been largely undocumented up to now. In this report, we attempt to make a link between the speciation of heavy elements in natural seawater and their uptake by a model marine organism. More specifically, because the interaction of actinides with marine invertebrates has been poorly studied, the accumulation in a representative member of the Mediterranean coralligenous habitat, the sponge Aplysina cavernicola, was investigated and its uptake curve exposed to a radiotracer (241)Am was estimated using a high-purity Ge gamma spectrometer. But in order to go beyond the phenomenological accumulation rate, the speciation of americium(III) in seawater must be assessed. The speciation of (241)Am (and natural europium as its chemically stable surrogate) in seawater was determined using a combination of different techniques: Time-Resolved Laser-Induced Fluorescence (TRLIF), Extended X-ray Absorption Fine Structure (EXAFS) at the LIII edge, Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy and Scanning Electron Microscopy (SEM) and the resulting data were compared with the speciation modeling. In seawater, the americium(III) complex (as well as the corresponding europium complex, although with conformational differences) was identified as a ternary sodium biscarbonato complex, whose formula can be tentatively written as NaAm(CO3)2·nH2O. It is therefore this chemical form of americium that is accumulated by the sponge A. cavernicola.

Cancer Cell Radiobiological Studies Using In-House-Developed α-Particle Irradiator.

An α-particle irradiator, enabling high-precision irradiation of cells for in vitro studies, has been constructed. The irradiation source was a (241)Am source, on which well inserts containing cancer cells growing in monolayer were placed. The total radioactivity, uniformity, and α-particle spectrum were determined by use of HPGe detector, Gafchromic dosimetry film, and PIPS detector measurements, respectively. Monte Carlo simulations were used for dosimetry. Three prostate cancer (LNCaP, DU145, PC3) and three pancreatic cancer (Capan-1, Panc-1, BxPC-3) cell lines were irradiated by α-particles to the absorbed doses 0, 0.5, 1, and 2 Gy. For reference, cells were irradiated using (137)Cs to the absorbed doses 0, 1, 2, 4, 6, 8, and 10 Gy. Radiation sensitivity was estimated using a tetrazolium salt-based colorimetric assay with absorbance measurements at 450 nm. The relative biological effectiveness for α-particles relative to γ-irradiation at 37% cell survival for the LNCaP, DU145, PC3, Capan-1, Panc-1, and BxPC-3 cells was 7.9 ± 1.7, 8.0 ± 0.8, 7.0 ± 1.1, 12.5 ± 1.6, 9.4 ± 0.9, and 6.2 ± 0.7, respectively. The results show the feasibility of constructing a desktop α-particle irradiator as well as indicate that both prostate and pancreatic cancers are good candidates for further studies of α-particle radioimmunotherapy.

An EXAFS spectroscopic study of Am(III) complexation with lactate.

The pH dependence (1-7) of Am(III) complexation with lactate in aqueous solution is studied using extended X-ray absorption fine-structure (EXAFS) spectroscopy. Structural data (coordination numbers, Am--O and Am--C distances) of the formed Am(III)-lactate species are determined from the raw k(3)-weighted Am LIII-edge EXAFS spectra. Between pH 1 and pH 6, Am(III) speciation shifts continuously towards complexed species with increasing pH. At higher pH, the amount of complexed species decreases due to formation of hydroxo species. The coordination numbers and distances (3.41-3.43 Å) of the coordinating carbon atoms clearly point out that lactate is bound `side-on' to Am(III) through both the carboxylic and the α-hydroxy function of lactate. The experimentally determined coordination numbers are compared with speciation calculations on the basis of tabulated thermodynamic stability constants. Both EXAFS data and thermodynamic modelling are in very good agreement. The EXAFS spectra are also analyzed by iterative transformation factor analysis to further verify the determined Am(III) speciation and the used structural model.