Bedaquiline: An Insight Into its Clinical Use in Multidrug-Resistant Pulmonary Tuberculosis.

Every year, the World Health Organization reports 500,000 new cases of drug-resistant tuberculosis (TB), which poses a serious global danger. The increased number of XDR-TB and MDR-TB cases reported worldwide necessitates the use of new therapeutic approaches. The main issues with the antitubercular medications now in use for the treatment of multidrug-resistant tuberculosis are their poor side effect profile, reduced efficacy, and antimicrobial resistance. One possible remedy for these problems is bedaquiline. The need for better treatment strategies is highlighted by the strong minimum inhibitory concentrations that bedaquiline (BDQ), a novel anti-TB medicine, exhibits against both drug-resistant and drug-susceptible TB. Bedaquiline may be able to help with these problems. Bedaquiline is a medication that is first in its class and has a distinct and particular mode of action. Bedaquiline is an ATP synthase inhibitor that is specifically directed against Mycobacterium tuberculosis and some nontuberculous mycobacteria. It is metabolized by CYP3A4. Bedaquiline preclinical investigations revealed intralesional drug biodistribution. The precise intralesional and multi-compartment pharmacokinetics of bedaquiline were obtained using PET bioimaging and high-resolution autoradiography investigations. Reduced CFU counts were observed in another investigation after a 12-week course of therapy. Meta-analyses and systematic reviews of phase II trials on bedaquiline's efficacy in treating drug-resistant tuberculosis in patients reported higher rates of cure, better culture conversion, and lower death rates when taken in conjunction with a background regimen. Here is a thorough medication profile for bedaquiline to aid medical professionals in treating individuals with tuberculosis.

Rifabutin loaded inhalable ß-glucan microparticle based drug delivery system for pulmonary TB.

Inhalable microparticle-based anti TB drug delivery systems are being investigated extensively for Tuberculosis [TB] treatment as they offer efficient and deep lung deposition with several advantages over conventional routes. It can reduce the drug dose, treatment duration and toxic effects and optimize the drug bioavailability. Yeast derived ß-glucan is a ß-[1-3/1-6] linked biocompatible polymer and used as carrier for various biomolecules. Due to presence of glucan chains, particulate glucans act as PAMP and thereby gets internalized via receptor mediated phagocytosis by the macrophages. In this study, ß-glucan microparticles were prepared by adding l-leucine as excipient, and exhibited 70% drug [Rifabutin] loading efficiency. Further, the sizing and SEM data of particles revealed a size of 2-4 µm with spherical dimensions. The FTIR and HPLC data confirmed the ß-glucan composition and drug encapsulations efficiency of the particles. The mass median aerodynamic diameter [MMAD] and geometric standard deviation [GSD] data indicated that these particles are inhalable in nature and have better thermal stability as per DSC thermogram. These particles were found to be non-toxic upto a concentration of 80 µg/ml and were found to be readily phagocytosed by human macrophage cells in-vitro as well as in-vivo by lung alveolar macrophage. This study provides a framework for future design of inhalable ß-glucan particle based host-directed drug delivery system against pulmonary TB.

Inhalable solid lipid nanoparticles of levofloxacin for potential tuberculosis treatment.

Delivering novel antimycobacterial agents through the pulmonary route using nanoparticle-based systems shows promise for treating diseases like tuberculosis. However, creating dry powder inhaler (DPI) with suitable aerodynamic characteristics while preserving nanostructure integrity and maintaining bioactivity until the active ingredient travels deeply into the lungs is a difficult challenge. We developed DPI formulations containing levofloxacin-loaded solid lipid nanoparticles (SLNs) via spray-drying technique with tailored aerosolization characteristics for effective inhalation therapy. A range of biophysical techniques, including transmission electron microscopy, confocal microscopy, and scanning electron microscopy were used to measure the morphologies and sizes of the spray-dried microparticles that explored both the geometric and aerodynamic properties. Spray drying substantially reduced the particle sizes of the SLNs while preserving their nanostructural integrity and enhancing aerosol dispersion with efficient mucus penetration. Despite a slower uptake rate compared to plain SLNs, the polyethylene glycol modified formulations exhibited enhanced cellular uptake in both A549 and NR8383 cell lines. The percent viability of Mycobacterium bovis had dropped to nearly 0 % by day 5 for both types of SLNs. Interestingly, the levofloxacin-loaded SLNs demonstrated a lower minimum bactericidal concentration (0.25 µg/mL) compared with pure levofloxacin (1 µg/mL), which indicated the formulations have potential as effective treatments for tuberculosis.

Pharmacokinetics of standard versus high-dose rifampin for tuberculosis preventive treatment: A sub-study of the 2R2 randomized controlled trial.

BACKGROUND: Pharmacokinetic data of rifampin, when used for tuberculosis preventive treatment (TPT) are not available. We aimed to describe the pharmacokinetics of rifampin used for TPT, at standard and higher doses, and to assess predictors of rifampin exposure. METHODS: A pharmacokinetic sub-study was performed in Bandung, Indonesia among participants in the 2R2 randomized trial, which compared TPT regimens of 2 months of high-dose rifampin at 20 mg/kg/day (2R20) and 30 mg/kg/day (2R30), with 4 months of standard-dose rifampin at 10 mg/kg/day (4R10) in adolescents and adults. Intensive pharmacokinetic sampling was performed after 2-8 weeks of treatment. Pharmacokinetic parameters were assessed non-compartmentally. Total exposure (AUC0-24) and peak concentration (Cmax) between arms were compared using one-way ANOVA and Tukey's post-hoc tests. Multivariable linear regression analyses were used to assess predictors of AUC0-24 and Cmax. RESULTS: We enrolled 51 participants in this study. In the 4R10, 2R20, and 2R30 arms, the geometric mean AUC0-24 was 68.0, 186.8, and 289.9 h⋅mg/L, and Cmax was 18.4, 36.7, and 54.4 mg/L, respectively; high interindividual variabilities were observed. Compared with the 4R10 arm, AUC0-24 and Cmax were significantly higher in the 2R20 and 2R30 arms (P < 0.001). Drug doses, body weight, and female sex were predictors of higher rifampin AUC0-24 and Cmax (P < 0.05). AUC0-24 and Cmax values were much higher than those previously reported in persons with TB disease. CONCLUSIONS: Doubling and tripling the rifampin dose led to three- and four-fold higher exposure compared to standard dose. Pharmacokinetic/pharmacodynamic modelling and simulations are warranted to support trials of shortening the duration of TPT regimens with high-dose rifampin.

Alpibectir: Early Qualitative and Quantitative Metabolic Profiling from a First-Time-in-Human Study by Combining 19F-NMR (Nuclear Magnetic Resonance), 1H-NMR, and High-Resolution Mass Spectrometric Analyses.

Alpibectir (also known as BVL-GSK098 and GSK3729098) is a new chemical entity (NCE) with a novel mechanism for the treatment of tuberculosis. The disposition of alpibectir was determined in subjects from a first-time-in-human trial after a single oral dose of 40 mg and after 7 days repeat dosing at 30 mg. Here we present a combined approach of 19F-NMR (nuclear magnetic resonance), 1H-NMR, and high-resolution mass spectrometry (HRMS) to confidently determine the human metabolic fate of alpibectir. Utilizing multiple sites of fluorination in the molecule, it was possible to fractionate human urine and plasma to confidently detect and quantify the metabolite responses using 19F-NMR. Qualitative detection and structural characterization of F-containing NMR fractions were performed using complementary high-resolution ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) analyses to further add confidence to the metabolite responses in these fractions. Subsequent 1H-NMR then provided unequivocal standard-free structural confirmation for key metabolites, which would not be possible with conventional radioactivity detection and LC-MS/MS techniques. Alpibectir was shown to undergo extensive hydrolysis of the central amide moiety, where the resultant N-dealkylated amine and trifluorobutyric acid products were detected initially by unbiased 19F-NMR detection along with major downstream biotransformations to form a carbamoyl glucuronide conjugate and trifluoroacetic acid, respectively. Parallel UHPLC-MS/MS analyses provided confirmatory or additional structural characterization only where relevant. These concerted data allowed for the qualitative metabolic profile and quantitative determination of drug-related material (DRM) in urine and plasma, along with the percentage of dose excreted in urine, to be reported in a comprehensive, efficient, and data-led manner. SIGNIFICANCE STATEMENT: Combining the selectivity of 19F-NMR (nuclear magnetic resonance) for unfractionated samples as first-intent, data-led sample fractionation prior to 19F-NMR and structure-rich 1H-NMR detection, along with the sensitivity of high-resolution ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS), a novel alternative for time-efficient detection and quantification of drug-related material (DRM) in human without use of radiolabeled drug is reported. This allowed more complete data rationalization of human metabolism, permitting early risk assessment and progression of the development of antitubercular agent, alpibectir.

Identification of novel hit molecules targeting M. tuberculosis polyketide synthase 13 by combining generative AI and physics-based methods.

In this work we investigated the Pks13-TE domain, which plays a critical role in the viability of the mycobacteria. In this report, we have used a series of AI and Physics-based tools to identify Pks13-TE inhibitors. The Reinvent 4, pKCSM, KDeep, and SwissADME are AI-ML-based tools. AutoDock Vina, PLANTS, MDS, and MM-GBSA are physics-based methods. A combination of these methods yields powerful support in the drug discovery cycle. Known inhibitors of Pks13-TE were collected, curated, and used as input for the AI-based tools, and Mol2Mol molecular optimisation methods generated novel inhibitors. These ligands were filtered based on physics-based methods like molecular docking and molecular dynamics using multiple tools for consensus generation. Rigorous analysis was performed on the selected compounds to reduce the chemical space while retaining the most promising compounds. The molecule interactions, stability of the protein-ligand complexes and the comparable binding energies with the native ligand were essential factors for narrowing the ligands set. The filtered ligands from docking, MDS, and binding energy colocations were further tested for their ADMET properties since they are among the essential criteria for this series of molecules. It was found that ligands Mt1 to Mt6 have excellent predicted pharmacokinetic, pharmacodynamic and toxicity profiles and good synthesisability.

Assessing potential drug-drug interactions between clofazimine and other frequently used agents to treat drug-resistant tuberculosis.

Clofazimine is included in drug regimens to treat rifampicin/drug-resistant tuberculosis (DR-TB), but there is little information about its interaction with other drugs in DR-TB regimens. We evaluated the pharmacokinetic interaction between clofazimine and isoniazid, linezolid, levofloxacin, and cycloserine, dosed as terizidone. Newly diagnosed adults with DR-TB at Klerksdorp/Tshepong Hospital, South Africa, were started on the then-standard treatment with clofazimine temporarily excluded for the initial 2 weeks. Pharmacokinetic sampling was done immediately before and 3 weeks after starting clofazimine, and drug concentrations were determined using validated liquid chromatography-tandem mass spectrometry assays. The data were interpreted with population pharmacokinetics in NONMEM v7.5.1 to explore the impact of clofazimine co-administration and other relevant covariates on the pharmacokinetics of isoniazid, linezolid, levofloxacin, and cycloserine. Clofazimine, isoniazid, linezolid, levofloxacin, and cycloserine data were available for 16, 27, 21, 21, and 6 participants, respectively. The median age and weight for the full cohort were 39 years and 52 kg, respectively. Clofazimine exposures were in the expected range, and its addition to the regimen did not significantly affect the pharmacokinetics of the other drugs except levofloxacin, for which it caused a 15% reduction in clearance. A posteriori power size calculations predicted that our sample sizes had 97%, 90%, and 87% power at P < 0.05 to detect a 30% change in clearance of isoniazid, linezolid, and cycloserine, respectively. Although clofazimine increased the area under the curve of levofloxacin by 19%, this is unlikely to be of great clinical significance, and the lack of interaction with other drugs tested is reassuring.

Efficacy, safety, and pharmacokinetics of isoniazid affected by NAT2 polymorphisms in patients with tuberculosis: A systematic review.

N-acetyltransferase 2 (NAT2) genetic polymorphisms might alter isoniazid metabolism leading to toxicity. We reviewed the impact of NAT2 genotype status on the pharmacokinetics, efficacy, and safety of isoniazid, a treatment for tuberculosis (TB). A systematic search for research articles published in Scopus, PubMed, and Embase until August 31, 2023, was conducted without filters or limits on the following search terms and Boolean operators: "isoniazid" AND "NAT2." Studies were selected if NAT2 phenotypes with pharmacokinetics or efficacy or safety of isoniazid in patients with TB were reported. Patient characteristics, NAT2 status, isoniazid pharmacokinetic parameters, early treatment failure, and the prevalence of drug-induced liver injury were extracted. If the data were given as a median, these values were standardized to the mean. Forty-one pharmacokinetics and 53 safety studies were included, but only one efficacy study was identified. The average maximum concentrations of isoniazid were expressed as supratherapeutic concentrations in adults (7.16 ± 4.85 µg/mL) and children (6.43 ± 3.87 µg/mL) in slow acetylators. The mean prevalence of drug-induced liver injury was 36.23 ± 19.84 in slow acetylators, which was significantly different from the intermediate (19.49 ± 18.20) and rapid (20.47 ± 20.68) acetylators. Subgroup analysis by continent showed that the highest mean drug-induced liver injury prevalence was in Asian slow acetylators (42.83 ± 27.61). The incidence of early treatment failure was decreased by genotype-guided isoniazid dosing in one study. Traditional weight-based dosing of isoniazid in most children and adults yielded therapeutic isoniazid levels (except for slow acetylators). Drug-induced liver injury was more commonly observed in slow acetylators. Genotype-guided dosing may prevent early treatment failure.

A Nanopore Sequencing-based Pharmacogenomic Panel to Personalize Tuberculosis Drug Dosing.

Rationale: Standardized dosing of antitubercular drugs leads to variable plasma drug levels, which are associated with adverse drug reactions, delayed treatment response, and relapse. Mutations in genes affecting drug metabolism explain considerable interindividual pharmacokinetic variability; however, pharmacogenomic assays that predict metabolism of antitubercular drugs have been lacking. Objectives: We sought to develop a Nanopore sequencing panel and validate its performance in patients with active tuberculosis (TB) to personalize treatment dosing. Methods: We developed a Nanopore sequencing panel targeting 15 SNPs in five genes affecting the metabolism of antitubercular drugs. For validation, we sequenced DNA samples (n = 48) from the 1,000 Genomes Project and compared the variant calling accuracy with that of Illumina genome sequencing. We then sequenced DNA samples from patients with active TB (n = 100) from South Africa on a MinION Mk1C and evaluated the relationship between genotypes and pharmacokinetic parameters for isoniazid (INH) and rifampin (RIF). Measurements and Main Results: The pharmacogenomic panel achieved 100% concordance with Illumina sequencing in variant identification for the samples from the 1,000 Genomes Project. In the clinical cohort, coverage was more than 100× for 1,498 of 1,500 (99.8%) amplicons across the 100 samples. Thirty-three percent, 47%, and 20% of participants were identified as slow, intermediate, and rapid INH acetylators, respectively. INH clearance was 2.2 times higher among intermediate acetylators and 3.8 times higher among rapid acetylators, compared with slow acetylators (P < 0.0001). RIF clearance was 17.3% (2.50-29.9) lower in individuals with homozygous AADAC rs1803155 G→A substitutions (P = 0.0015). Conclusions: Targeted sequencing can enable the detection of polymorphisms that influence TB drug metabolism on a low-cost, portable instrument to personalize dosing for TB treatment or prevention.

Evaluation of critical parameters in the hollow-fibre system for tuberculosis: A case study of moxifloxacin.

AIMS: The hollow­fibre system for tuberculosis (HFS­TB) is a preclinical model qualified by the European Medicines Agency to underpin the anti­TB drug development process. It can mimic in vivo pharmacokinetic (PK)­pharmacodynamic (PD) attributes of selected antimicrobials, which could feed into in silico models to inform the design of clinical trials. However, historical data and published protocols are insufficient and omit key information to allow experiments to be reproducible. Therefore, in this work, we aim to optimize and standardize various HFS­TB operational procedures. METHODS: First, we characterized bacterial growth dynamics with different types of hollow­fibre cartridges, Mycobacterium tuberculosis strains and media. Second, we mimicked a moxifloxacin PK profile within hollow­fibre cartridges, in order to check drug­fibres compatibility. Lastly, we mimicked the moxifloxacin total plasma PK profile in human after once daily oral dose of 400 mg to assess PK­PD after different sampling methods, strains, cartridge size and bacterial adaptation periods before drug infusion into the system. RESULTS: We found that final bacterial load inside the HFS­TB was contingent on the studied variables. Besides, we demonstrated that drug­fibres compatibility tests are critical preliminary HFS­TB assays, which need to be properly reported. Lastly, we uncovered that the sampling method and bacterial adaptation period before drug infusion significantly impact actual experimental conclusions. CONCLUSION: Our data contribute to the necessary standardization of HFS­TB experiments, draw attention to multiple aspects of this preclinical model that should be considered when reporting novel results and warn about critical parameters in the HFS­TB currently overlooked.

First-in-human study of alpibectir (BVL-GSK098), a novel potent anti-TB drug.

BACKGROUND: The clinical candidate alpibectir augments the activity of, and overcomes resistance to, the anti-TB drug ethionamide in vitro and in vivo. OBJECTIVES: A Phase 1, double-blind, randomized, placebo-controlled study to investigate the safety, tolerability, pharmacokinetics (PK) and food effect of alpibectir administered as single and multiple oral doses in healthy volunteers (NCT04654143). METHODS: Eighty participants were randomized. In single ascending dose (SAD), a total of six dose levels of alpibectir (0.5 to 40 mg) were tested under fasted and fed (10 mg) conditions as single daily doses in sequential cohorts. In multiple ascending dose (MAD), repeat doses (5 to 30 mg) were administered once daily for 7 days in three sequential cohorts. RESULTS: No serious adverse event was reported. Thirteen participants across groups experienced a total of 13 mild or moderate treatment-emergent adverse events. Alpibectir showed rapid absorption after single dose (mean Tmax range of 0.88 to 1.53 h). Food affected the PK of alpibectir, characterized by a slower absorption (mean Tmax 3.87 h), a lower Cmax (-17.7%) and increased AUC0-t (+19.6%) compared with the fasted condition. Following repeat dosing, dose proportionality was shown for both Cmax and AUC0-tau. Accumulation of alpibectir was observed across all doses, with a more profound effect on AUC during a dosing interval (AUC0-tau) compared with Cmax (1.8- and 1.3-fold on average), respectively. Steady state was considered to have been achieved by Day 7 of dosing. CONCLUSIONS: Alpibectir was generally well tolerated, and no clinically relevant safety findings were identified in the participants treated during SAD or MAD. The PK is dose-proportional and affected by food.

Formulation development, characterization, and evaluation of bedaquiline fumarate - Soluplus® - solid dispersion.

Bedaquiline fumarate (BQF) is classified as a BCS class II drug and has poor water solubility and dissolution rate, which ultimately compromises bioavailability. The objective of this study is to improve the biopharmaceutical properties of BQF through a solid dispersion system by using Soluplus®. Two solid dispersion systems were prepared i.e. binary solid dispersion (BSD) and ternary solid dispersion (TSD) where 14.31-fold and 20.43-fold increase in solubility of BQF was observed with BSD and TSD in comparison to BQF. In our previous research work, we explored the BSD and TSD of BQF with a crystalline polymer, poloxamer 188, which showed an increment in the solubility of BQF. In the current research, amorphous Soluplus® polymer was selected to formulate BSD and TSD with BQF and showed higher solubility than poloxamer 188. The various solid and liquid state characterization results confirmed the presence of an amorphous form of BQF inside solid dispersion. The Fourier transform infrared spectroscopy showed no chemical interactions between BQF and polymer. The cellular uptake results demonstrated higher uptake in Caco-2 cell lines. Pharmacokinetic studies showed enhanced solubility and bioavailability of TSDs. Hence, the present research shows a promising formulation strategy for enhancing the biopharmaceutical performance of BQF by increasing its solubility.

Extrapolation of lung pharmacokinetics of antitubercular drugs from preclinical species to humans using PBPK modelling.

OBJECTIVES: To develop physiologically based pharmacokinetic (PBPK) models for widely used anti-TB drugs, namely rifampicin, pyrazinamide, isoniazid, ethambutol and moxifloxacin lung pharmacokinetics (PK)-regarding both healthy and TB-infected tissue (cellular lesion and caseum)-in preclinical species and to extrapolate to humans. METHODS: Empirical models were used for the plasma PK of each species, which were connected to multicompartment permeability-limited lung models within a middle-out PBPK approach with an appropriate physiological parameterization that was scalable across species. Lung's extracellular water (EW) was assumed to be the linking component between healthy and infected tissue, while passive diffusion was assumed for the drug transferring between cellular lesion and caseum. RESULTS: In rabbits, optimized unbound fractions in intracellular water of rifampicin, moxifloxacin and ethambutol were 0.015, 0.056 and 0.08, respectively, while the optimized unbound fractions in EW of pyrazinamide and isoniazid in mice were 0.25 and 0.17, respectively. In humans, all mean extrapolated daily AUC and Cmax values of various lung regions were within 2-fold of the observed ones. Unbound concentrations in the caseum were lower than unbound plasma concentrations for both rifampicin and moxifloxacin. For rifampicin, unbound concentrations in cellular rim are slightly lower, while for moxifloxacin they are significantly higher than unbound plasma concentrations. CONCLUSIONS: The developed PBPK approach was able to extrapolate lung PK from preclinical species to humans and to predict unbound concentrations in the various TB-infected regions, unlike empirical lung models. We found that plasma free drug PK is not always a good surrogate for TB-infected tissue unbound PK.

Third Generation Solid Dispersion-Based Formulation of Novel Anti-Tubercular Agent Exhibited Improvement in Solubility, Dissolution and Biological Activity.

The long treatment period and development of drug resistance in tuberculosis (TB) necessitates the discovery of new anti-tubercular agents. The drug discovery program of the institute leads to the development of an anti-tubercular lead (IIIM-019), which is an analogue of nitrodihydroimidazooxazole and exhibited promising anti-tubercular action. However, IIIM-019 displays poor aqueous solubility (1.2 µg/mL), which demands suitable dosage form for its efficient oral administration. In the present study, third generation solid dispersion-based formulation was developed to increase the solubility and dissolution of IIIM-019. The solubility profile of IIIM-019 using various polymeric carriers was determined and subsequently, PVP K-30 and P-407 were selected for preparation of binary and ternary solid dispersion. The third-generation ternary solid dispersion comprising PVP K-30 and P-407 revealed a remarkable enhancement in the aqueous solubility of IIIM-019. Physicochemical characterization of the developed formulations was done by employing FTIR spectroscopy, scanning electron microscopy, X-ray diffraction analysis, differential scanning calorimetry, and dynamic light scattering analysis. The dissolution study indicated an impressive release profile with the optimized formulation. The optimized formulation was further examined for cytotoxicity, cellular uptake, and hemolytic activity. The results indicated that the formulation had no apparent cytotoxicity on Caco-2 cells and was non-hemolytic in nature. Moreover, the optimized formulation showed significantly improved anti-tubercular activity compared to the native molecule. These findings showed that the developed third generation ternary solid dispersion could be a promising option for the oral delivery of investigated anti-tubercular molecule.

Effect of Food Composition on the PK of Isoniazid Quantitatively Explained Using Physiologically Based Biopharmaceutics Modeling.

This work shows the utilization of a physiologically based biopharmaceutics model (PBBM) to mechanistically explain the impact of diverse food types on the pharmacokinetics (PK) of isoniazid (INH) and acetyl-isoniazid (Ac-INH). The model was established and validated using published PK profiles for INH along with a combination of measured and predicted values for the physico-chemical and biopharmaceutical propertied of INH and Ac-INH. A dedicated ontogeny model was developed for N-acetyltransferase 2 (NAT2) in human integrating Michaelis Menten parameters for this enzyme in the physiologically based pharmacokinetic (PBPK) model tissues and in the gut, to explain the pre-systemic and systemic metabolism of INH across different acetylator types. Additionally, a novel equation was proposed to calculate the luminal drug degradation related to the presence of reducing sugars, using individual sugar molar concentrations in the meal. By incorporating luminal degradation into the model, adjusting bile salt concentrations and gastric emptying according to food type and quantity, the PBBM was able to accurately predict the negative effect of carbohydrate-rich diets on the PK of INH.

Genetic and clinical predictors of rifapentine and isoniazid pharmacokinetics in paediatrics with tuberculosis infection.

OBJECTIVES: Twelve weekly doses of rifapentine and isoniazid (3HP regimen) are recommended for TB preventive therapy in children with TB infection. However, they present with variability in the pharmacokinetic profiles. The current study aimed to develop a pharmacokinetic model of rifapentine and isoniazid in 12 children with TB infection using NONMEM. METHODS: Ninety plasma and 41 urine samples were collected at Week 4 of treatment. Drug concentrations were measured using a validated HPLC-UV method. MassARRAY® SNP genotyping was used to investigate genetic factors, including P-glycoprotein (ABCB1), solute carrier organic anion transporter B1 (SLCO1B1), arylacetamide deacetylase (AADAC) and N-acetyl transferase (NAT2). Clinically relevant covariates were also analysed. RESULTS: A two-compartment model for isoniazid and a one-compartment model for rifapentine with transit compartment absorption and first-order elimination were the best models for describing plasma and urine data. The estimated (relative standard error, RSE) of isoniazid non-renal clearance was 3.52 L·h-1 (23.1%), 2.91 L·h-1 (19.6%), and 2.58 L·h-1 (20.0%) in NAT2 rapid, intermediate and slow acetylators. A significant proportion of the unchanged isoniazid was cleared renally (2.7 L·h-1; 8.0%), while the unchanged rifapentine was cleared primarily through non-renal routes (0.681 L·h-1; 3.6%). Participants with the ABCB1 mutant allele had lower bioavailability of rifapentine, while food prolonged the mean transit time of isoniazid. CONCLUSIONS: ABCB1 mutant allele carriers may require higher rifapentine doses; however, this must be confirmed in larger trials. Food did not affect overall exposure to isoniazid and only delayed absorption time.

Investigating the Impact of First-Line Anti-Tuberculosis Drugs Encapsulated in a Eugenol-Based Nanoemulsion on Human Serum Albumin.

BACKGROUND: Eugenol exhibits broad-spectrum antibacterial and anti-inflammatory properties. However, cytotoxicity at high concentrations limits the full utilization of eugenol-based drug complexes. Formulations of multidrug-loaded eugenol-based nanoemulsions have reduced cytotoxicity; however, it remains crucial to understand how these eugenol complexes interact with primary human carrier proteins to design and develop therapeutic alternatives. Consequently, this study primarily aims to investigate the impact on Human Serum Albumin (HSA) when it interacts with eugenol-based complexes loaded with first-line anti-tuberculosis drugs. METHODS: This study used various spectroscopic such as UV-visible spectroscopy, Fluorescence spectroscopy, Fourier-transform infrared spectroscopy and computational methods such as molecular docking and 100 ns molecular simulation to understand the impact of eugenol-based first-line anti-tuberculosis drug-loaded nanoemulsions on HSA structure. RESULTS: The binding of the HSA protein and eugenol-based complexes was studied using UV-visible spectroscopic analysis. Minor changes in the fluorophores of the protein further confirmed binding upon interaction with the complexes. The Fourier-transform infrared spectra showed no significant changes in protein structure upon interaction with eugenol-based multidrug-loaded nanoemulsions, suggesting that this complex is safe for internal administration. Unlike eugenol or first-line anti-tuberculosis alone, molecular docking revealed the strength of the binding interactions between the complexes and the protein through hydrogen bonds. The docked complexes were subjected to a 100 ns molecular dynamics simulation, which strongly supported the conclusion that the structure and stability of the protein were not compromised by the interaction. CONCLUSIONS: From the results we could comprehend that the eugenol (EUG)-drug complex showed greater stability in HSA protein structure when compared to HSA interacting with isoniazid (INH), rifampicin (RIF), pyrazinamide (PYR), or ethambutol (ETH) alone or with EUG alone. Thus, inferring the potential of EUG-based drug-loaded formulations for a safer and efficient therapeutic use.

Pharmacokinetic and Pharmacodynamic Modeling Analysis of Delpazolid (LCB01-0371) in Adult Patients with Pulmonary Tuberculosis.

Delpazolid (LCB01-0371) is a novel oxazolidinone derivative with a good safety profile for treating gram-positive pathogenic infections such as Mycobacterium abscessus, a highly pathogenic drug-resistant Mycobacterium. In this study, we evaluated the pharmacokinetics (PK) and pharmacodynamics (PD) of delpazolid after 14 days of multiple oral administration, using data from adult patients with pulmonary tuberculosis. 800 mg once a day, 400 mg twice a day, 800 mg twice a day, and 1200 mg once a day delpazolid for 14 days were tested in 63 patients with pulmonary tuberculosis. For PK blood collection, inpatient and outpatient scheduling were separately implemented. Plasma concentrations of delpazolid were measured at visits 2, 4, 6, and 8 in outpatients, and four sparse blood samples were measured in inpatients. PD models were sequentially fitted using individual PK parameter estimates obtained from PK compartmental models. For PK modeling, 180 plasma concentrations of delpazolid from 56 patients were included. A two-compartment mixed first- and zero-order absorption model best described the time course of plasma concentration. For the PD model, 448 bacterial titer data from 60 patients were used. The time course of bacterial titers (log10 CFU/mL) was described by a model that consists of the growth and killing rate of bacteria with the sigmoid Emax model. The PK-PD simulation suggested that the bacterial titers are the lowest on the 800 mg bid regimen among the four, consistent with observed data, as all regimens substantially decrease. In the dose-response relationship, the effectiveness of delpazolid was suggested.

Pharmacokinetic-Pharmacodynamic Evidence From a Phase 3 Trial to Support Flat-Dosing of Rifampicin for Tuberculosis.

BACKGROUND: The optimal dosing strategy for rifampicin in treating drug-susceptible tuberculosis (TB) is still highly debated. In the phase 3 clinical trial Study 31/ACTG 5349 (NCT02410772), all participants in the control regimen arm received 600 mg rifampicin daily as a flat dose. Here, we evaluated relationships between rifampicin exposure and efficacy and safety outcomes. METHODS: We analyzed rifampicin concentration time profiles using population nonlinear mixed-effects models. We compared simulated rifampicin exposure from flat- and weight-banded dosing. We evaluated the effect of rifampicin exposure on stable culture conversion at 6 months; TB-related unfavorable outcomes at 9, 12, and 18 months using Cox proportional hazard models; and all trial-defined safety outcomes using logistic regression. RESULTS: Our model-derived rifampicin exposure ranged from 4.57 mg · h/L to 140.0 mg · h/L with a median of 41.8 mg · h/L. Pharmacokinetic simulations demonstrated that flat-dosed rifampicin provided exposure coverage similar to the weight-banded dose. Exposure-efficacy analysis (n = 680) showed that participants with rifampicin exposure below the median experienced similar hazards of stable culture conversion and TB-related unfavorable outcomes compared with those with exposure above the median. Exposure-safety analysis (n = 722) showed that increased rifampicin exposure was not associated with increased grade 3 or higher adverse events or serious adverse events. CONCLUSIONS: Flat-dosing of rifampicin at 600 mg daily may be a reasonable alternative to the incumbent weight-banded dosing strategy for the standard-of-care 6-month regimen. Future research should assess the optimal dosing strategy for rifampicin, at doses higher than the current recommendation.

Use of multiple pharmacodynamic measures to deconstruct the Nix-TB regimen in a short-course murine model of tuberculosis.

A major challenge for tuberculosis (TB) drug development is to prioritize promising combination regimens from a large and growing number of possibilities. This includes demonstrating individual drug contributions to the activity of higher-order combinations. A BALB/c mouse TB infection model was used to evaluate the contributions of each drug and pairwise combination in the clinically relevant Nix-TB regimen [bedaquiline-pretomanid-linezolid (BPaL)] during the first 3 weeks of treatment at human equivalent doses. The rRNA synthesis (RS) ratio, an exploratory pharmacodynamic (PD) marker of ongoing Mycobacterium tuberculosis rRNA synthesis, together with solid culture CFU counts and liquid culture time to positivity (TTP) were used as PD markers of treatment response in lung tissue; and their time-course profiles were mathematically modeled using rate equations with pharmacologically interpretable parameters. Antimicrobial interactions were quantified using Bliss independence and Isserlis formulas. Subadditive (or antagonistic) and additive effects on bacillary load, assessed by CFU and TTP, were found for bedaquiline-pretomanid and linezolid-containing pairs, respectively. In contrast, subadditive and additive effects on rRNA synthesis were found for pretomanid-linezolid and bedaquiline-containing pairs, respectively. Additionally, accurate predictions of the response to BPaL for all three PD markers were made using only the single-drug and pairwise effects together with an assumption of negligible three-way drug interactions. The results represent an experimental and PD modeling approach aimed at reducing combinatorial complexity and improving the cost-effectiveness of in vivo systems for preclinical TB regimen development.