Effectiveness of zygomatic-implant fixed rehabilitation for the atrophic edentulous maxilla: protocol for a systematic review and network meta-analysis.

BACKGROUND: Atrophic edentulous maxilla is a debilitating condition caused by the progressive and irreversible bone resorption following loss of teeth, that results in bone of inadequate volume and density. This makes conventional implant therapy extremely challenging without complex reconstructive procedures. Several techniques such as sinus augmentation, short implants, and tilted implants have been used for the rehabilitation of the atrophic maxilla. In recent years, zygomatic implants have emerged as a graftless rehabilitation technique. However, few studies compare zygomatic-implant fixed rehabilitation with other fixed rehabilitation techniques. The existing body of evidence on zygomatic implants is largely based on clinical and disease-oriented outcomes. METHODS: A network meta-analysis (NMA) will be conducted in order to compare the effectiveness of zygomatic-implant fixed rehabilitation with the other rehabilitation techniques. Experimental and observational studies comparing different implant-assisted fixed rehabilitation in adults with atrophic maxilla will be included. The primary and secondary outcomes will be patient's satisfaction and quality of life respectively. Additional outcomes include the implant's survival/success, and biological and prosthetic complications. An electronic search will be performed through various databases for articles in English and French, without time limits. Risk of bias will be assessed using the Revised Cochrane Risk-of-Bias tool for randomized controlled trials, and ROBINS-I for non-randomized and observational studies. Two independent reviewers will screen the titles and abstracts and extract data. Any discrepancy between reviewers will be discussed and resolved through consensus or with the help of a third reviewer. Pairwise meta-analyses will be performed using a random effects model. I2, τ2, transitivity, subgroup/meta-regression analyses will assess and explain heterogeneity and distribution of effect modifiers. A network plot will be created to connect the different interventions directly and indirectly. Interventions will be ranked using the surface under cumulative ranking curve. Confidence in the results of the NMA will be assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE). DISCUSSION: This study will be the first to assess the effectiveness of zygomatic-implant fixed rehabilitation for the atrophic maxilla using NMA. The evidence obtained will aid clinical decision-making and will advance the knowledge of the rehabilitation techniques for the atrophic maxilla. SYSTEMATIC REVIEW REGISTRATION: PROSPERO CRD42023353303.

Restoring Severely Atrophic Edentulous Ridge of Mandible Using Self-Expanding Tissue Expander-A Case Report.

This report describes the use of Self Inflating Tissue Expanders (SITEs) to rehabilitate severely atrophic edentulous mandibular ridges, enabling successful bone grafting and implant placement. The treatment resulted in stable and complication-free implants over a seven-year follow-up, demonstrating SITEs' effectiveness in providing sufficient bone volume and soft tissue coverage for dental implants.

Accuracy of flapless surgery using an autonomous robotic system in full-arch immediate implant restoration: A case series.

OBJECTIVES: This observational study aimed to evaluate the accuracy of robotic computer-assisted implant surgery (r-CAIS) for full-arch immediate restoration and to analyse possible factors contributing to deviations. METHODS: Three edentulous patients (five arches) underwent r-CAIS. Osteotomies were performed using an autonomous robot under the surgeon's supervision, and implant placement was performed in a freehand or robotic manner. Prefabricated provisional prostheses were delivered immediately after surgery. Postoperative cone beam computed tomography scans were performed to assess the deviations between the planned and placed implants. Statistics were compared with deviations of s-CAIS outlined in a meta-analysis. RESULTS: A sum of 28 implants were used. The mean global coronal and apical deviations measured 0.91 ± 0.43 mm and 1.01 ± 0.45 mm, respectively, and the mean angular deviation measured 1.21 ± 1.24 º. The r-CAIS showed significantly better precision than the s-CAIS in full-arch cases (P < 0.001). The implants inserted using the robotic arm exhibited fewer deviations than those placed in the freehand manner. Eighty percent of prefabricated provisional prostheses were successfully delivered. CONCLUSIONS: Within the limitations of the present study, our data suggest that autonomous r-CAIS is a feasible approach for simultaneous immediate restoration in edentulous patients, showing better accuracy than s-CAIS. Further large-scale studies are necessary to verify the advantages and disadvantages of this novel technique and to explore possible factors that influence its accuracy. CLINICAL SIGNIFICANCE: Autonomous r-CAIS can provide clinically acceptable implant placement accuracy in edentulous patients, significantly surpassing s-CAIS. This level of accuracy may represent a viable therapeutic approach for simultaneous immediate full-arch restoration.

Horizontal Alveolar Ridge Splitting and Expansion.

When considering placing dental implants in atrophic edentulous sites, there may be inadequate site width and little or no vertical bone loss. Any of several surgical procedures can augment these sites. Extracortical augmentation is done by applying graft material against the cortical bone. This technique expects progenitor cells to migrate outside the bony ridge's confines and form new bone. Another method entails ridge splitting and expansion to create space for osteogenesis and, when possible, implant placement. This may be a better method for horizontal ridge augmentation. The ridge is split, separating the facial and lingual cortices for a complete bone fracture. The patient's osseous cells can then migrate into the created space from the exposed medullary bone to form bone. The technique can be preferably performed flapless so the intact periosteum maintains a blood supply to ensure appropriate healing.

Reconstruction of the Fully Edentulous Maxilla Using Sinus Grafts and Bone Expansion: A Retrospective Analysis of 50 Consecutive Cases.

A series of 50 cases involving reconstruction of the fully edentulous maxilla using sinus grafts, bone expansion, and classic crown and bridge to restore to normal contour, comfort, health, function, and esthetics is retrospectively analyzed using 25 years of follow-up data.

Evaluation of masticatory efficiency and OHRQoL in implant-retained overdenture with different numbers of implant in the edentulous mandible: a one-year follow-up prospective study.

PURPOSE: The aim of this article is to evaluate to the masticatory function performance and Oral Health-related Quality of Life (OHRQoL) in implant-retained overdenture compared with different implant number placements in the edentulous mandible. METHODS: From 2013 to 2015, each patients received 3 implants (iSy-Implant, Camlog, Wimsheim, Germany) in intraforaminal mandible (34, 41/31, 44). After operation, inserted implants were gradually loaded and incorporated into an overdenture with a self-aligning attachment system (Locator abutments) in 3 + 3 + 3 months. Five checked points were performed chewing cycle test with multicolored chewing gum and OHIP-G14 questionnaire and a sum score questionnaire as following: pre-operation, one implant load (41/31), two implants loaded (33,43), three implants loaded and 1-year follow up. RESULT: A total of 10 patients with 30 implants were placed, the survival rate of the implants was 100% within 1-year follow-up. Regarding the masticatory function analysis, for the higher number of chewing cycles, the higher mixing rate was observed. After 1 year, the inter-mixing rate without significant changes was found compared to the time after three implants were loaded with attachment system. The mean value of OHIP-G14 was 30.4 preoperatively, 21.1 after loading the first locator, 10.7 after loading two locator abutments, and 3.2 after loading all three locator abutments. After 1 year, OHIP-G14 was 2.6 without significantly changed. The mean of the sum score was 15.5 preoperatively, 27.8 after activation of the first locator, 39.4 after activation of two locators, 46.2 after activation of all three locators, and 47.3 after 1 year. An increase of 0.7 sum score units per time point was observed. No significance was detectable, analogous to OHIP-G14, compared to the time of activation of all three locator setups (p-value = 0.22). CONCLUSIONS: A significant improvement in masticatory function performance and OHRQoL was evaluated with the increasing number of implants with locator attachment in edentulous mandible. With the investigation of the OHIP-G14 and sum score, the results of patient report outcome might be associated with the increase in the number of implants.

Evaluation of Quality of Life and Satisfaction with Fixed Prostheses on Zygomatic Implants vs All-on-Four Concept: A Randomized Clinical Study.

AIM: To compare between the rehabilitation of atrophied maxilla with fixed prosthesis using two posterior zygomatic implants and two conventional anterior implants or four implants inserted according to the all-on-four concept regarding the patient quality of life and satisfaction after one year of prosthesis insertion. MATERIALS AND METHODS: Thirty-six patients with atrophic edentulous maxillae were randomized into two groups: Group I (rehabilitated with fixed prostheses supported by two zygomatic and two conventional implants in the anterior region) and group II (fixed prostheses on four implants in the anterior region following an all-on-four concept). One year after the placement of the definitive prostheses, patients completed oral health impact profile-14 and satisfaction questionnaires. RESULTS: All patients were satisfied regarding retention, stability, occlusion, comfort, cleaning, speaking, chewing, bolus quality, appearance, handling, prosthesis apart, and embarrassing, with no significant significance between two groups except satisfaction with surgical procedures and healing period. CONCLUSIONS: Using two distally tilted zygomatic implants or all-on-four concept to rehabilitate atrophied maxilla by fixed detachable prosthesis could be considered a promising functional and esthetic treatment option regarding the patient satisfaction. CLINICAL SIGNIFICANCE: Traditionally, treatment of maxillary atrophied ridges was done by bone grafting or sinus-lifting techniques; however, using all-on-four concept or zygomatic implants was a successful treatment as it has high success rates and highly satisfied by the patients. How to cite this article: Nagib MA, Ibrahim AM, Abdel-Rahman FH, et al. Evaluation of Quality of Life and Satisfaction with Fixed Prostheses on Zygomatic Implants vs All-on-Four Concept: A Randomized Clinical Study. J Contemp Dent Pract 2024;25(2):141-147.

Identifying an optimal approach for the placement of pterygoid implants: A 3D finite element analysis.

STATEMENT OF PROBLEM: A consensus on the optimal approach to the placement of pterygoid implants is lacking. PURPOSE: The purpose of this finite element analysis study was to determine the optimal approach to the placement of pterygoid implants by comparing biomechanical behavior. MATERIAL AND METHODS: An edentulous and moderately atrophic maxilla with the anatomic structure of the pterygomaxillary region was constructed. Complete arch restorations with 4 standard anterior implants and pterygoid implants in 3 approaches were simulated: L70, long pterygoid implants (4.1×18 mm) inclined at 70 degrees relative to the Frankfort horizontal plane with anchorage in the pterygoid process; L45, long pterygoid implants (4.1×20 mm) inclined at 45 degrees with anchorage in the pterygoid process; and S45, shorter pterygoid implants (4.1×13 mm) inclined 45 degrees without apical anchorage. The L70, L45, and S45 groups were classified as D or S depending on the bone quality: D3 (dense trabecular bone) or D4 (sparse trabecular bone). A total of 6 finite element models were built. The bone failure theory, based on the von Mises theory, was used to judge yielding of the trabecular bone. The von Mises stress (σVM) distribution was measured in the cortical bone, the trabecular bone, and on the implant surface. Deformation (DF) distribution was obtained for the entire bone (DFB) and bone surrounding the pterygoid implant (DFP). RESULTS: L70 showed a lower maximum σVM value (maxσVM), more uniform σVM distribution in the cortical bone, trabecular bone, and on the implant surface and a lower maximum DFp value (maxDFp), especially in the D4 bone. The biomechanical behaviors were similar in L45 and S45 with no stress distribution in the pterygoid process. In the D4 bone, L70, L45, and S45 exceeded the limited stress of the bone failure theory by 50%, 130%, and 130%, while all values were under the limit in D3 bone. CONCLUSIONS: The approach of pterygoid implants inclined at 70 degrees relative to the Frankfort plane with anchorage in the pterygoid process was optimal, providing improved biomechanical behavior. Clinically, in the case of D4 bone, the inclined angulation of pterygoid implants should be 70 degrees to minimize the risk of failure.

Feasibility of implant placement in healed mandibular molar sites: A retrospective cone beam computed tomography study.

STATEMENT OF PROBLEM: Implant placement in the mandibular molar sites plays a crucial role in the restoration of edentulous mandibles. However, the evaluation of bone quantity before implant surgery using cone beam computed tomography (CBCT) is lacking. PURPOSE: The purpose of this clinical study was to evaluate CBCT images of edentulous patients to analyze the feasibility of implant placement in healed mandibular molar sites. MATERIAL AND METHODS: The CBCT data of 138 patients were analyzed in the sagittal plane for measurements of mandibular bone height (MBH), superior bone height (SBH), inferior bone height (IBH), buccal bone width (BBW), lingual bone width (LBW), and alveolar bone widths (ABWs). The edentulous sites were categorized according to the bone quantity and complexity of the implant surgery. Multivariate analysis of variance (MANOVA) was used to analyze the site, sex, and age-related variations. An independent t test was used to compare the difference of bone dimension in different sites and between sexes. One-way ANOVA followed by post hoc tests were used to analyze the difference between different age groups. Categorical variables were presented as number of events and percentages. The chi-squared test was used to compare categorical variables (α=.05). RESULTS: A total of 534 sites of interest were recorded, including 274 hemimandibles. A significant difference in BBW was found between the first and second molar sites. Men had higher MBH, SBH, IBH, and BBW than women. The distribution of implant surgical complexity in the conventional group was 63.5%, while the buccolingual tilted implant group accounted for 17.0%, and the complicated group accounted for 19.5%. Of the 274 hemimandibles, an implant could be placed directly at molar sites in 88% of situations. CONCLUSIONS: The BBW at the mandibular second molar site was greater than that at the first molar site. The amount of available bone in the SBH and BBW was greater in men than in women at the healed molar sites. Age did not significantly affect the complexity of the implant surgery. Implants can be placed directly in healed mandibular molar sites in most patients who require a complete arch mandibular implant-supported restoration.

Novel complete-arch pillar system (CAPS) to register implant position and maxillomandibular relationship in one single visit.

OBJECTIVES: This article presents a novel complete-arch pillar system (CAPS) to register implant position and maxillomandibular relationship in one single visit for implant-supported fixed complete dental prostheses (IFCDPs). MATERIAL AND METHODS: The novel system presents a 3-unit toolset comprising intraoral scan bodies (ISBs), lateral pillar attachments (LPAs) and occlusal pillar attachments (OPAs). A 2-stage single visit workflow by an intraoral scanner (Trios 5) was introduced. The first stage "Screw-Scan-Done" was used to describe complete-arch intraoral implant scanning using LPAs. The second stage "Screw-Occlude-Done" involved virtual occlusal recording using OPAs. Two patients with one single edentulous arch were selected for this study. In the first patient, 6 bone level implants (Bone Level Tapered, Straumann) were placed in the edentulous maxilla at positions 12, 14, 16, 22, 24 and 26. In the second patient, 4 bone level implants (NobelActive CC, Nobel Biocare) were placed in the edentulous mandible at positions 32, 35, 42 and 45. A CAD-CAM procedure was initiated with the acquired IOS data to fabricate an interim IFCDP at the same day. Periapical radiographs were obtained of the implant-prosthetic connection of the definitive IFCDPs to verify the passive fit. Metrology software (Geomagic Qualify, 3D Systems - Matlab, Mathworks) was used to assess the implant analogs position in the 3D-printed casts used for fabricating the definitive IFCDPs. A quantitative occlusal relationship analysis was performed with IOS. RESULTS: Radiographic examination revealed no gaps at implant-prosthetic connection of the definitive IFCDPs. The 3D-printed casts showed an overall average distance deviation within the clinically acceptable range of errors of 150 µm. Quantitative occlusal relationship analysis with IOS showed well-distributed contacts. CONCLUSION: Within the limitations of this study, the following conclusions can be drawn: (1) A 3-unit toolset with ISBs, LPAs and OPAs allows to register the implant position and maxillomandibular relationship in one single visit; (2) the 2-stage clinical workflow with the CAPS system facilitates the IOS data acquisition for fabrication of an interim IFCDP at the same day; (3) a passive fit was demonstrated for the interim and the definitive IFCDPs. CLINICAL SIGNIFICANCE: The CAPS system can help clinicians to register the implant position and the maxillomandibular relationship in one single visit for the fabrication of an IFCDP.

Pretreatment periodontitis is predictive of a poorer prognosis after esophagectomy for esophageal cancer.

BACKGROUND: Poor oral health is an independent risk factor for upper-aerodigestive tract cancers, including esophageal cancer. Several studies have investigated short-term outcomes after esophagectomy and the impact of periodontal disease, but few have examined the impact of periodontal disease on long-term outcomes. The purpose of this study was to investigate the rate of periodontitis among esophagectomy patients and the prognostic value of periodontitis and its effect on prognosis after esophagectomy. METHODS: A total of 508 patients who underwent esophagectomy received oral health care from a dentist before cancer treatment at Akita University Hospital between January 2009 and December 2021. We assessed the presence and severity of the patients' periodontitis and divided them into no-periodontitis, mild periodontitis, severe periodontitis and edentulous jaw groups. We then assessed 10-year overall survival (OS) and disease-specific survival (DSS) and determined whether periodontitis was an independent prognostic factor affecting OS and DSS. RESULTS: We found that 101 (19.9%) patients had no periodontitis, 207 (40.8%) had mild periodontitis, 176 (34.6%) had severe periodontitis requiring tooth extraction, and 24 (4.7%) had edentulous jaw. Both OS and DSS were significantly poorer in the periodontitis than no-periodontitis group (p < 0.001). In detail, the edentulous jaw group had the poorest prognosis (p < 0.001). Multivariate analysis showed that periodontitis was an independent risk factor affecting OS and DSS. CONCLUSION: Esophageal cancer patients had a high prevalence of periodontitis. Moreover, the presence of periodontitis and severity of periodontitis are independent risk factors contributing to a poorer prognosis after esophagectomy.

Prevalence and Association between Primary Stability and Bone Quality in Implants Placed in Edentulous Dental Arches: A Retrospective Analysis.

Immediate function has become an accepted treatment modality for fixed restorations in completely edentulous jaws. The dental implants have gained immense popularity. A secure implant primary stability is positively associated with a successful implant integration and long term successful clinical outcome. The main aim of this study was to find the association between primary stability and bone density in implants placed in maxilla and mandible. A total of 1263 patients who had undergone implant placement from March 2020-March 2021 in Saveetha Dental College and Hospitals, Chennai, India were chosen for the study. The primary stability and bone density of these patients were collected from the hospital records. The collected data was compiled, reviewed, tabulated in Microsoft Excel sheet and entered in SPSS software for statistical analysis. In the present study, the patient aged between 28 and 37 years had undergone more implant placement (31%) with male predilection (53%). The most commonly associated primary stability was found to be 30-40 Ncm (51.37%) predominantly with D2 type of bone density (52.69%). A Chi-squared statistical test was done for primary stability and bone density and the P was found to be 0.00 (Chi-squared P < 0.05, statistically significant). The most predominant bone density was D2 associated with primary stability of 30-40 Ncm. The association between bone density and primary stability was found to be statistically significant. The present study shows a strong relationship between bone density and primary implant stability.

Modified Technique to Rehabilitate American Society of Anesthesiology-III Patient, Through Flapless Procedure With Computed Tomography-Guided Surgery.

PURPOSE: The aim was to evaluate the safety and effectiveness of a computed tomography-guided surgery implant placement with a flapless technique and immediate functional loading in an American Society of Anesthesiology-III patient. METHODS: This technical note involved a 64-year-old American Society of Anesthesiology-III patient. Her hopeless teeth were extracted and a restorative evaluation was provided as a prosthetic reference. The surgical procedure was based on the flapless technique that let us to use local anesthesia. The authors used an All-on-4 concept restoration for maxilla and conventional fixed prosthesis procedures for jaw rehabilitation. The authors placed 4 tilted implants in the upper maxilla and 6 right implants in the jaw. Implants were loaded with a provisional prosthesis on the same day of surgery. Five months later, provisional restoration was removed; the authors placed into the ceramic crowns 2 Procera Implant Bridge (Nobel Biocare) frameworks, developed through computer-aided design/computer-aided manufacturing technology. CONCLUSIONS: Computed tomography-guided surgery is a minimally invasive technique that allows, through a flapless approach, safer and more predictable procedures. In this technical note, the authors achieved accurate implant placement and precise fit of restoration with natural looking appearance; this patient-oriented-treatment led to a reduced healing time with better compliance.

Peri-zygomatic complications on zygomatic implants with or without penetrating the external surface of zygoma: A 2-year retrospective study.

OBJECTIVES: The main purpose of this retrospective study was to assess the difference in the incidence of peri-zygomatic complications (PZCs) when zygomatic implants (ZIs) penetrate or do not penetrate the external surface of zygoma. MATERIALS AND METHODS: This study included 32 patients with edentulous maxillae or potentially edentulous maxillae undergo zygomatic implantation. The patients were divided into the penetration group (P-group) and the non-penetration group (N-group) according to whether the apex of implants penetrated the external surface of zygoma in postoperative CBCT. The extension length, the penetration section of the implants, and the skin thickness at the corresponding position were simultaneously measured. Clinical follow-up was conducted regularly until 2 years after surgery. The occurrence of PZCs (including peri-zygomatic infection, skin numbness, non-infectious pain, and foreign body sensation) was recorded. A mixed effect logistic model was used to compare the difference of complication rate between the P-group and the N-group, and odds ratio (OR) was calculated. Then identify the impact of the extension length, penetration section and skin thickness in P-group with the same model. RESULTS: A total of 71 ZIs were implanted in 32 patients, including 37 implants in the P-group and 34 implants in the N-group. During the 2-year follow-up, a total of 13 implants occurred PZCs, with an overall complication rate of 18.3%. Thereinto, the incidence rate was 29.7% in the P-group, and 5.9% in the N-group (OR = 6.77). In P-group, there was a significant difference in complication rate of different extension lengths, while the penetration section and skin thickness had no statistical significance on the complication rate. CONCLUSION: Under the limitation of this study, to minimize the risk of PZCs, ZI should be placed in a manner that avoids the apex penetrating the external surface of the zygoma.

Long-term survival and complications of Quad Zygoma Protocol with Anatomy-Guided Approach in severely atrophic maxilla: A retrospective follow-up analysis of up to 17 years.

INTRODUCTION: The objective of the study was to provide long-term clinical outcomes and complications in the severely atrophic edentulous maxillae treated by means of the quad zygoma protocol (QZP) using the Anatomy-Guided Approach (AGA). METHODS: This was a retrospective cohort study of all consecutive patients with severely atrophic edentulous maxilla and insufficient bone height and width in the anterior and posterior regions bilaterally, who underwent rehabilitation with the QZP between May 2006 and December 2021. All patients were followed for at least 1 year. All zygomatic implants (ZIs) were placed by the same surgeon. The primary endpoint of the study was the implant survival rate. Secondary endpoints were implant success rate, prosthesis success rate, complications, and Oral Health-Related Quality of Life using the OHIP-14 questionnaire. RESULTS: A total of 56 patients (men 16, women 40) with 224 ZIs (Nobel Biocare, n = 204; Straumann, n = 16; Southern Implant, n = 4) placement were included with a mean follow-up period 8.8 ± 3.9 years (range, 1.2-17.0). The survival (success) rate was 97.7%. Five ZIs in four patients failed. The mean time between implant placement and failure was 8.6 years (range, 0.5-13.3). All patients received immediate loading with acrylic prosthesis. The successful rates for the definitive prosthesis were 98.2%. Forty-two patients received posterior cantilever for rehabilitation of fixed definitive prosthesis. Local orofacial inflammation (35.7%) and Sinusitis (12.5%) were the most common complications, occurring at a mean follow-up of 10.0 (range, 4.2-14.9) and 10.3 (range, 4.3-16.2) years, respectively. In 48 patients, the mean score of the OHIP-14 questionnaire was 1.7 ± 2.6 with the follow-up period of 9.0 ± 4.1 years. CONCLUSIONS: The rehabilitation of severely atrophic edentulous maxilla using the QZP has shown a predictable and high survival rate in the long term. The implementation of an immediate loading protocol offers potential benefits in stabilizing ZIs with cross-arch stabilization. Moreover, the use of a posterior cantilever in reconstruction can effectively establish functional occlusion through well-distributed ZIs, eliminating the need for additional implant placement.

Accuracy of the Yakebot dental implant robotic system versus fully guided static computer-assisted implant surgery template in edentulous jaw implantation: A preliminary clinical study.

AIMS: To compare the accuracy of the Yakebot dental implant robotic system with that of fully guided static computer-assisted implant surgery (CAIS) template in edentulous implantation. MATERIALS AND METHODS: Thirteen patients with edentulous were recruited and divided into two groups: the Yake robotic system group (experimental) (n = 5) and the CAIS group (control) (n = 8). Postoperative cone-beam computed tomography (CBCT) was performed immediately, and the 3-dimensional positions of implants were obtained and compared with that in the preoperative design. The comparison showed platform, apical, depth, and angular deviations. A value of p < 0.05 was considered statistically significant. RESULTS: A total of 84 implants (36 in the robotic group and 48 in the CAIS group) were placed. The mean deviation at the implant platform, apex, depth, and angle in the CAIS group was 1.37 ± 0.72 mm, 1.28 ± 0.68 mm, 0.88 ± 0.47 mm, and 3.47 ± 2.02°, respectively. However, the mean deviation at the implant platform, apex, depth, and angle in the robotic group was 0.65 ± 0.25 mm, 0.65 ± 0.22 mm, 0.49 ± 0.24 mm, and 1.43 ± 1.18°, respectively. Significant differences in the four types of deviation (p < 0.05) between the two groups were observed. CONCLUSION: The accuracy of robotic system in edentulous implant placement was superior to that of the CAIS template, suggesting that robotic system is more accurate, safe, and flexible, can be considered a promising treatment in clinical practice.

Oral health-related quality of life (OHRQoL) and implant therapy: A prospective multicenter study of preoperative, intermediate, and posttreatment assessment.

The purpose of this multicenter continuation study was to use high patient numbers in order to generate reliable statements regarding the association between different implant indications and OHRQoL. Patients with various types of indication for dental implants, ranging from single tooth loss to edentulous jaws, were included. Quality of life relating to dental implants was assessed through the oral health impact profile (OHIP-G-21), which has a summary score from 0 to 20 in healthy patients. In total, 16 253 patients from 29 centers (European Centers for Dental Implantology (ECDI)) were involved in the study between 2009 and 2021.8251 patients (50.7%) completed the questionnaire after implant insertion, and 4996 patients (30.7%) after prosthodontic treatment. The average age was 54 years (range 18-88 years). Posterior single-tooth gap (28.5%) and free-end gap (27.8%) were the most frequent indications. The preoperative OHIP-G-21 score for all patients was 32.81 (SD 11.92), while the score during the healing period was 30.00 (SD 10.72), and after completion of treatment 27.24 (SD 9.26) (p < 0.001). The most significant improvements in OHIP-G-21 scores were in the indication of edentulous jaw (phase 1, 41.81 (SD 15.53); phase 2, 35.39 (SD 14.22); phase 3, 29.60 (SD 10.12) (p < 0.001). The study revealed significant improvements in the most frequently reported problems (chewing, serious concerns, appearance) (p < 0.001). Insertion of dental implants and prosthodontic rehabilitation led to an improved OHRQoL for patients with all indications for dental implants. Special attention should be paid to patients with edentulous jaw, since in comparison with other indications it had the greatest impact on improving OHRQoL. The psychological dissatisfaction scale of the OHIP-G-21 represented the most important factors for patients, and these scores were substantially influenced by implant therapy. Thus, treating physicians should increase their focus on these factors, in order to avoid dissatisfaction and increase the likelihood of complete implant therapy success.

Technique-Related Survival Rate and Complications of Zygomatic Implant Placement: A Systematic Review and Meta-Analysis.

PURPOSE: To assess the survival rate (SR) and probability of postoperative complications at both the implant and patient level for each of the four surgical techniques for zygomatic implant (ZI) placement: Brånemark, sinus slot, extrasinus, and extramaxillary. MATERIALS AND METHODS: A systematic literature review and meta-analysis of clinical studies that reported the survival rate and postoperative ZI complications for the rehabilitation of atrophic edentulous maxillae was conducted based on PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) recommendations. Two independent reviewers consulted four databases during the literature search: MEDLINE (PubMed), Google Scholar, Clinicaltrials.gov, and LILACS. Duplicate articles were eliminated. RESULTS: A total of 35 studies were included in the meta-analysis. Subgroup analysis showed that study design (prospective vs retrospective) had no significant impact (P = .10) on the outcomes. The SR was highest for the Brånemark and extrasinus techniques (100%) and lowest for the sinus slot technique (94%; 95% CI = 86% to 102%). The extramaxillary (38%; 95% CI = 1% to 3%) and the Brånemark (29%; 95% CI = 15% to 44%) techniques resulted in the highest occurrence of patient-level complications. Moreover, the extramaxillary technique showed the highest percentage of prothesis-related complications (44%; 95% CI = 27% to 62%). CONCLUSIONS: ZI placement was demonstrated to be a reliable technique for the rehabilitation of severely atrophic maxillae, irrespective of the surgical technique evaluated. Accurate case and surgical protocol selection is of paramount importance to reduce technique-related postoperative complications.

Comparative Evaluation of Survival Rates and Marginal Bone Levels of Nonsplinted Immediately Loaded Interforaminal Mandibular Implant-Retained Overdentures: A Randomized Controlled Clinical Trial with 5-Year Results.

PURPOSE: Τo evaluate and compare the marginal bone loss (MBL), survival rates, and periodontal parameters of immediately loaded implants with either Dolder bar or Locator attachments placed in the interforaminal region of edentulous mandibles. MATERIALS AND METHODS: A total of included 19 patients with edentulous mandibles each received two implants in the interforaminal area of the symphysis. Randomly allocated Dolder bar or Locator attachments were then attached immediately, and both clips and a framework were fastened to the denture by the dental laboratory within 24 hours. RESULTS: A total of 28 subjects with 56 implants were treated in accordance with the immediate-loading study protocol. Of these, 9 patients were lost to follow-up; 1 patient reported a serious illness and 8 patients moved and couldn't be reached. The 19 subjects not lost to follow-up (11 women and 8 men; average age: 68 years) were included. Every patient received either two Locator abutments and were assigned to group A (7 patients; 36.8%) or two multiunit abutments and were assigned to group B (12 patients; 63.2%). No implant failure was detected for either group, and therefore the survival rate for both groups was 100% after 5 years. After 5 years without any symptoms, 2 implants from group A and 7 implants from group B showed > 2 mm of MBL, which makes the group A success rate 85.7% and the group B success rate 70.8%. Modified sulcular bleeding index (mSBI) did not differ significantly at any of the measurement intervals. However, the modified plaque index (mPI) of group B was significantly higher than group A at the 60-month follow-up. CONCLUSION: It can be concluded that either splinting or not splinting the immediately loaded interforaminal implants to retain mandibular overdentures (OVDs) does not affect marginal bone levels after 5 years and immediate loading of nonsplinted implants with Locator attachments can be safely preferred to retain mandibular OVDs.

Instantaneous dental implant loading technique by fixed dentures: A retrospective cohort study.

BACKGROUND: In the context of dental prostheses, splinting multiple implants together may improve their stability. The approach may be especially favorable when performing immediate loading procedures, increasing the implant osseointegration rate, and reducing the risk of implant and prosthetic failure. The instantaneous loading technique (ILT) involves creating a metal framework to splint the implants by intraorally welding them pair-by-pair, using purposefully created abutments. OBJECTIVES: The aim of the study was to investigate the prosthetic success when using ILT to rehabilitate partially edentulous patients through immediately loaded prostheses. MATERIAL AND METHODS: Clinical records of patients treated with ILT were retrospectively assessed, and the prosthetic success rate was analyzed in terms of fractures, chipping, unscrewing, screw fracture rate, and mucositis. Furthermore, the implant success rates were evaluated by measuring marginal bone loss (MBL). RESULTS: A total of 55 patients (20 males and 35 females with a mean age of 59.8 ±9.4 years), corresponding to 66 prostheses, were included. A total of 160 implants were placed. At the last follow-up (39.6 ±28.4 months), 1 patient (1.8%; 1 prosthesis (1.5%)) showed the fracture of the prosthesis material. Peri-implantitis affected 4 implants (2.5%), and 4 more implants (2.5%) showed radiolucency, affecting 5 patients (9.1%). Two other patients (3.6%) suffered from mucositis. The implant success rate, according to the Albrektsson and Zarb criteria, was 94.4%. No implants were lost. The mean MBL values at the implant level, the prosthesis level and the patient level were 0.28 ±0.56 mm, 0.30 ±0.51 mm and 0.33 ±0.54 mm, respectively. CONCLUSIONS: The instantaneous loading technique appears to be a viable approach to rehabilitating partially edentulous patients through immediate loading.