Three-dimensional printed custom-made modular talus prosthesis in patients with talus malignant tumor resection.

BACKGROUND: Talar malignant tumor is extremely rare. Currently, there are several alternative management options for talus malignant tumor including below-knee amputation, tibio-calcaneal arthrodesis, and homogenous bone transplant while their shortcomings limited the clinical application. Three-dimensional (3D) printed total talus prosthesis in talus lesion was reported as a useful method to reconstruct talus, however, most researches are case reports and its clinical effect remains unclear. Therefore, the current study was to explore the application of 3D printed custom-made modular prosthesis in talus malignant tumor. METHODS: We retrospectively analyzed the patients who received the 3D printed custom-made modular prosthesis treatment due to talus malignant tumor in our hospital from February 2016 to December 2021. The patient's clinical data such as oncology outcome, operation time, and volume of blood loss were recorded. The limb function was evaluated with the Musculoskeletal Tumor Society 93 (MSTS-93) score, The American Orthopedic Foot and Ankle Society (AOFAS) score; the ankle joint ranges of motion as well as the leg length discrepancy were evaluated. Plain radiography and Tomosynthesis-Shimadzu Metal Artefact Reduction Technology (T-SMART) were used to evaluate the position of prosthesis and the osseointegration. Postoperative complications were recorded. RESULTS: The average patients' age and the follow-up period were respectively 31.5 ± 13.1 years; and 54.8 months (range 26-72). The medium operation time was 2.4 ± 0.5 h; the intraoperative blood loss was 131.7 ± 121.4 ml. The mean MSTS-93 and AOFAS score was 26.8 and 88.5 respectively. The average plantar flexion, dorsiflexion, varus, and valgus were 32.5, 9.2, 10.8, and 5.8 degree respectively. One patient had delayed postoperative wound healing. There was no leg length discrepancy observed in any patient and good osseointegration was observed on the interface between the bone and talus prosthesis in all subjects. CONCLUSION: The modular structure of the prosthesis developed in this study seems to be convenient for prosthesis implantation and screws distribution. And the combination of solid and porous structure improves the initial stability and promotes bone integration. Therefore, 3D printed custom-made modular talus prosthesis could be an alternative option for talus reconstruction in talus malignant tumor patients.

Evaluation of the functional and radiologic outcomes in talus fractures following surgery.

OBJECTIVE: The long-term outcome of talus fractures is not yet sufficiently favorable despite improved resources and growing experience. With increasing fracture severity, the complication rate increases. This study aimed to evaluate the mid-to-long-term clinical and radiologic outcomes using the scoring system and imaging archive in patients with talus fractures who were surgically treated in our hospital. PATIENTS AND METHODS: The mid- to long-term outcomes of patients with talus fractures admitted to Aydin Adnan Menderes University Faculty of Medicine Hospital between January 2010 and December 2020 and treated surgically were analyzed using satisfaction and functional scoring systems. RESULTS: Demographic data of the patients enrolled in our study indicated that talus fractures primarily developed in young males (p<0.05). The scores obtained from American Orthopaedic Foot & Ankle Society (AOFAS) scoring were consistent with patients' long-term consequences, such as avascular necrosis and post-traumatic arthritis (p<0.05). The rates of avascular necrosis and post-traumatic arthritis were lower, whereas AOFAS scores were higher in patients in whom the reduction quality was within the exact anatomical limits (p<0.05). The Hawkins sign had a positive predictive significance in patients free of avascular necrosis (p<0.05). Higher AOFAS scores were observed in patients treated with a single surgical incision (p<0.05). The timing of the surgery did not influence the results (p>0.05). CONCLUSIONS: The outcomes of patients treated surgically for talus fracture depended on the quality of reduction. In the mid-to-long term, the satisfaction scores of our patients with talus fractures who had undergone surgical treatment were rated as moderate.

[Design and application of a device for radiographic projection of the tibio-astragalangeal mortise]. / Diseño y aplicación de dispositivo para proyección radiográfica de la mortaja tibio-astragalina.

INTRODUCTION: ligamentous injuries of the distal tibiofibular syndesmosis resulting in its opening are common occurrences in traumatology; however, their diagnosis poses a challenge for orthopedic surgeons. The tibioastragaloid mortise radiograph view is the most commonly used method for diagnosing this type of injury, but its reliability is compromised due to variations in ankle positioning during the study, which often depend on the operator. OBJECTIVE: to demonstrate that the designed device achieves a correct and consistent radiographic image of the distal tibiofibular syndesmosis in the mortise view. MATERIAL AND METHODS: we present a prospective, longitudinal, observational study. We designed a polypropylene device that maintains the ankle at 90 degrees of dorsiflexion and 15 degrees of internal rotation. The device was used to take mortise view radiographs of healthy ankles, and corresponding measurements were taken to assess the syndesmosis. RESULTS: we evaluated a total of 46 radiographs of healthy ankles, with a predominance of left ankles. The obtained measurements were as follows: anterior tibiofibular distance (ATFD) ranged from 3 to 6 mm, posterior tibiofibular distance (PTFD) ranged from 1 to 3 mm, tibiofibular clear space (TFCS) ranged from 2 to 3 mm, and a Merle D'Aubigne ratio of 2:1 was observed in all ankles. When comparing the measurements obtained with those established by Harper and Keller, no statistically significant difference was found (2 < 5). CONCLUSION: with the use of the designed device, we achieved a correct and consistent radiographic image of the mortise and the distal tibiofibular syndesmosis.

INTRODUCCIÓN: las lesiones ligamentarias de la sindesmosis tibioperonea distal que ocasionan apertura de la misma son muy frecuentes en traumatología; sin embargo, su diagnóstico es un reto para el cirujano ortopedista. La radiografía de la mortaja tibioastragalina es el método más utilizado para el diagnóstico de este tipo de lesiones, pero es poco confiable ya que la posición del tobillo durante el estudio suele variar dependiendo del operador. OBJETIVO: demostrar que con el uso del dispositivo diseñado se logra una imagen radiográfica correcta y constante de la sindesmosis tibioperonea distal en la proyección de la mortaja. MATERIAL Y MÉTODOS: estudio prospectivo, longitudinal y observacional. Diseñamos un dispositivo de polipropileno que mantiene el tobillo a 90 grados de dorsiflexión y rotación interna de 15 grados. Aplicamos el dispositivo para tomar radiografías de la mortaja en tobillos sanos y les realizamos las mediciones correspondientes para valorar la sindesmosis. RESULTADOS: valoramos un total de 46 radiografías de tobillos sanos, con un predominio de tobillos izquierdos. Las mediciones conseguidas fueron las siguientes: espacio tibioperoneo (ETP) de 3 a 6 mm, la superposición tibioperonea (STP) de 1 a 3 mm, espacio astrágalo-tibial medial (EATM) de 2 a 3 mm y una relación de Merle D'Aubigne de 2:1 en todos los tobillos. Al comparar las mediciones obtenidas con las establecidas por Harper y Keller, no se encontró una diferencia estadísticamente significativa (2 < 5). CONCLUSIÓN: con el uso del dispositivo diseñado, obtuvimos una correcta y constante imagen radiográfica de la mortaja y la sindesmosis tibioperonea distal.

Three-Dimensional Printed Total Talus Replacement with a Concurrent Total Ankle Arthroplasty as a Personalized Approach for Advanced Ankle Osteoarthritis A Case Repor.

Ankle arthritis is becoming more common and can be pain-ful and debilitating. As the disease progresses, degenera-tive cystic changes may be found in the distal fibula, distal tibia, and talus. After failure of non-operative modalities, arthrodesis is often considered the surgical intervention of choice, but this leaves the patient with reduced range of motion, altered gait, and can negatively impact adjacent joints of the foot. Total ankle arthroplasty has been found to be an effective surgical option for ankle arthritis but is contraindicated in patients with talar collapse. When this is the case, a more personalized approach for preserving ankle motion is necessary. We present the case of a 65-year-old male with severe right ankle arthritis and talar collapse treated with a custom three-dimensionally printed talus and concurrent total ankle replacement with 2-year follow-up.

Weight-bearing Ultrasound to Diagnose Talar Dislocation Causing Tarsal Tunnel Syndrome.

The neuropathic compression of the tibial nerve and/or its branches on the medial side of the ankle is called tarsal tunnel syndrome (TTS). Patients with TTS presents pain, paresthesia, hypoesthesia, hyperesthesia, muscle cramps or numbness which affects the sole of the foot, the heel, or both. The clinical diagnosis is challenging because of the fairly non-specific and several symptomatology. We demonstrate a case of TTS caused by medial dislocation of the talar bone on the calcaneus bone impacting the tibial nerve diagnosed only by ultrasound with the patient in the standing position.

Effects of added trunk load on the in vivo kinematics of talocrural and subtalar joints during landing.

BACKGROUND: Landing from heights is a common movement for active-duty military personnel during training. And the additional load they carry while performing these tasks can affect the kinetics and ankle kinematic of the landing. Traditional motion capture techniques are limited in accurately capturing the in vivo kinematics of the talus. This study aims to investigate the effect of additional trunk load on the kinematics of the talocrural and subtalar joints during landing, using a dual fluoroscopic imaging system (DFIS). METHODS: Fourteen healthy male participants were recruited. Magnetic resonance imaging was performed on the right ankle of each participant to create three-dimensional (3D) models of the talus, tibia, and calcaneus. High-speed DFIS was used to capture the images of participants performing single-leg landing jumps from a height of 40 cm. A weighted vest was used to apply additional load, with a weight of 16 kg. Fluoroscopic images were acquired with or without additional loading condition. Kinematic data were obtained by importing the DFIS data and the 3D models in virtual environment software for 2D-3D registration. The kinematics and kinetics were compared between with or without additional loading conditions. RESULTS: During added trunk loading condition, the medial-lateral translation range of motion (ROM) at the talocrural joint significantly increased (p < 0.05). The subtalar joint showed more extension at 44-56 ms (p < 0.05) after contact. The subtalar joint was more eversion at 40-48 ms (p < 0.05) after contact under the added trunk load condition. The peak vertical ground reaction force (vGRF) significantly increased (p < 0.05). CONCLUSIONS: With the added trunk load, there is a significant increase in peak vGRF during landing. The medial-lateral translation ROM of the talocrural joint increases. And the kinematics of the subtalar joint are affected. The observed biomechanical changes may be associated with the high incidence of stress fractures in training with added load.

Different radius of curvature at the talus trochlea from northern Chinese population measured using 3D model.

BACKGROUND: To analyze the curvature characteristics of the talus trochlea in people from northern China in different sex and age groups. METHODS: Computed tomography scanning data of talus from 61 specimens were collected and constructed as a three-dimensional model by Materialise's Interactive Medical Image Control System(MIMICS) software, anteromedial(AM), posteromedial(PM), anterolateral(AL), and posterolateral(PL) edge, anterior edge of medial trochlea, posterior edge of medial trochlea and anterior edge of lateral trochlea were defined according to the anatomical landmarks on trochlear surface. The curvature radii for different areas were measured using the fitting radius and measure module. RESULTS: There were significant differences among the talus curvatures in the six areas (F = 54.905, P = 0.000), and more trends in the analytical results were as follows: PM > PL > MP > AL > MA > AM. The average PL radius from specimens aged > 38 years old was larger than that from specimens aged < = 38 years (t=-2.303, P = 0.038). The talus curvature of the AM for males was significantly larger than that for females (t = 4.25, P = 0.000), and the curvature of the AL for males was larger than that for females (t = 2.629, P = 0.010). For observers aged < = 38 years, the AM curvature of the right talus in the male group was significantly larger than that in the female group (P < 0.01). In age < = 38years group, the MA curvature of right talus in male was significantly larger than in female group(P < 0.01), fitting radius of talus for male (21.90 ± 1.97 mm) was significantly greater than female of this(19.57 ± 1.26 mm)(t = 6.894, P = 000). The average radius of the talus in the male population was larger than that in the female population. CONCLUSION: There was no significant relationship between age and talus curvature for males and females. The radius of curvature in the posterior area was significantly larger than that in the anterior area. We recommend that this characteristic of the talus trochlea should be considered when designing the talus component in total ankle replacement (TAR).

Talonavicular-cuneiform arthrodesis in the management of Mueller-Weiss Syndrome: a retrospective case series.

Mueller-Weiss Syndrome (MWS), characterized by spontaneous adult-onset tarsal navicular osteonecrosis, is an uncommon cause of chronic midfoot pain that can lead to functional impairment and progressive deformities. This study aimed to present clinical and radiological outcomes of talonavicular-cuneiform (TNC) arthrodesis in the treatment of patients with MWS. A retrospective study was performed on 8 consecutive patients (6 female, 2 male; mean age = 50 years; range = 33-64) who underwent TNC arthrodesis using plate fixation with autologous bone grafting for the treatment of MWS. To evaluate clinical status, the American Orthopaedic Foot and Ankle Society (AOFAS) Ankle-Midfoot Score was performed immediately preoperatively and at the final follow-up. In radiographic evaluation, talus-first metatarsal angle (Meary's angle) was measured preoperatively and at the final follow-up. Solid fusion was also examined on postoperative radiographs and computerised tomography. The mean follow-up was 35 months (range = 24-52). The mean AOFAS improved from 37 (range = 24-53) preoperatively to 85 (range = 80-93) at the final follow-up (p < 0.001). No major intra- operative complications were observed in any of the patients. According to the Maceira and Rochera radiological staging system, 5 feet was stage 3, and 3 feet was stage 4. The mean union time was 10 months (range = 5-15). Radiographic solid fusion was achieved in all but one foot that developed talonavicular non-union. TNC arthrodesis using plate fixation with autologous bone grafting seems to be an effective surgical method for reconstruction of MWS.

Osteochondral Lesions of the Talus: Etiology, Clinical Presentation, Treatment Options, and Outcomes.

This article reviews the etiology, clinical presentation, classification schemes, and treatment options for osteochondral lesions of the talus. These lesions typically occur after a traumatic injury and are best diagnosed on MRI. Asymptomatic lesions and incidentally found lesions are best treated conservatively; however, acute displaced osteochondral fragments may require surgical treatment. Lesion characteristics may dictate surgical technique. Outcomes following surgical treatment may be impacted by patient age, BMI, and lesion characteristics.

Talar Neck Fractures With Associated Ipsilateral Foot and Ankle Fractures Have a Higher Risk of Avascular Necrosis.

OBJECTIVES: To determine if talar neck fractures with concomitant ipsilateral foot and/or ankle fractures (TNIFAFs) are associated with higher rates of avascular necrosis (AVN) compared with isolated talar neck fractures (ITNs). DESIGN: Retrospective cohort. SETTING: Single level I trauma center. PATIENT SELECTION CRITERIA: Skeletally mature patients who sustained talar neck fractures from January 2008 to January 2017 with at least 6-month follow-up. Based on radiographs at the time of injury, fractures were classified as ITN or TNIFAF and by Hawkins classification. OUTCOME MEASURES AND COMPARISONS: The primary outcome was the development of AVN based on follow-up radiographs, with secondary outcomes including nonunion and collapse. RESULTS: There were 115 patients who sustained talar neck fractures, with 63 (55%) in the ITN group and 52 (45%) in the TNIFAF group. In total, 63 patients (54.7%) were female with the mean age of 39 years (range, 17-85), and 111 fractures (96.5%) occurred secondary to high-energy mechanisms of injury. There were no significant differences in demographic or clinical characteristics between groups ( P > 0.05). Twenty-four patients (46%) developed AVN in the TNIFAF group compared with 19 patients (30%) in the ITN group ( P = 0.078). After adjusting for Hawkins classification and other variables, the odds of developing AVN was higher in the TNIFAF group compared with the ITN group [odds ratio, 2.43 (95% confidence interval, 1.01-5.84); ( P = 0.047)]. CONCLUSIONS: This study found a significantly higher likelihood of AVN in patients with talar neck fractures with concomitant ipsilateral foot and/or ankle fractures compared to those with isolated talar neck fractures after adjusting for Hawkins classification and other potential prognostic confounders. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Radiographic Analysis of Valgus Ankle Deformity With or Without Medial Longitudinal Arch Collapse.

BACKGROUND: Establishing a surgical plan for ankle deformities necessitates a comprehensive understanding of the deforming forces involved, and the morphology of the ankle deformity plays an important role as well. Valgus tibiotalar tilt development has mostly been described in patients with a low medial longitudinal arch, as seen in progressive collapsing foot deformity (PCFD). However, some valgus ankles demonstrate no radiographic evidence of a collapsed medial arch. This study aims to investigate whether there are differences in the radiographic morphology of valgus ankle deformities between patients with and without a low medial longitudinal arch to explore if they have different etiologies. METHODS: We retrospectively reviewed patients who underwent surgical treatment for asymmetric valgus ankle deformity at our institution between 2017 and 2021. Patients with a valgus tibiotalar tilt (TT) greater than 4 degrees and Meary angle greater than 30 degrees (mean: 38.9) were included in the PCFD group (n = 29). The non-PCFD group (n = 24) with TT greater than 4 degrees and Meary angle less than 4 degrees (mean: 0.3) was also established. In the weightbearing ankle anteroposterior view, the TT and medial distal tibial angle were measured. Additionally, to assess the mediolateral position of the talus, the talar center migration (TCM) and lateral talar dome-plafond distance (LTD-P) ratio in the coronal plane were measured. In weightbearing computed tomography (WBCT), the degree of axial plane talocalcaneal subluxation and the prevalence of sinus tarsi bony impingement were assessed. Intergroup comparison was conducted. RESULTS: Both groups demonstrated a similar degree of TT, with a mean of 11.6 degrees in the PCFD group and 13.7 degrees in the non-PCFD group (P = .2330). However, the PCFD group showed a significantly greater TCM and LTD-P ratio compared with those of the non-PCFD group (P < .0001), indicating that PCFD patients have a more medially translated talus in ankle anteroposterior radiographs. WBCT showed that the PCFD group on average had 18 degrees greater axial plane talocalcaneal subluxation (P < .0001) and 52% higher prevalence of sinus tarsi bony impingement (P = .0002) compared with the non-PCFD group. CONCLUSION: This study suggests that valgus ankles may exhibit different radiographic morphologies depending on the status of the longitudinal arch. Valgus ankles in PCFD patients tend to have a more medially translated talus. This finding may suggest the presence of different deforming forces between the 2 groups and may indicate the need for different treatment strategies to address talar tilt. LEVEL OF EVIDENCE: Level III, case-control.

Three-dimensional Mapping Analysis of Talus Fractures and Demonstration of Different Surgical Approaches for Talus Fractures.

OBJECTIVE: The talus is an important component in the ankle, and its treatment after injury is crucial. However, complications and adverse events due to incomplete traditional classifications may still occur, and these classifications fail to analyze the patterns and distribution of fractures from a three-dimensional perspective. Therefore, in this study, we aimed to analyze the location and distribution of fracture lines in different types of talus fractures using three-dimensional (3D) and heat mapping techniques. Additionally, we aimed to determine the surface area of the talus that can be utilized for different approaches of internal fixation, aiding in the planning of surgical procedures. METHODS: We retrospectively analyzed data from CT scans from 126 patients diagnosed with talus fractures at our two hospitals. We extracted the CT data of a healthy adult and created a standard talus model. We performed 3D reconstruction using patients' CT images and superimposed the fracture model onto the standard model for drawing fracture lines. Subsequently, we converted the fracture lines into a heat map for visualization. Additionally, we measured 20 specimens to determine the boundary for various ligaments attached to the talus. We determined the surface area of the talus available for different surgical approaches by integrating the boundary data with previously reported data on area of exposure. RESULTS: Without considering the displacement distance of the fracture, fracture types were classified as follows, by combining Hawkins and Sneppen classifications: talar neck, 41.3%; posterior talar tubercle, 22.2%; body for the talus and comminuted, 17.5%; lateral talar tubercle, 11.9%; and talar head, 7.1%. We established fracture line and heat maps using this classification. Additionally, we demonstrated the available area for anteromedial, anterolateral, posteromedial, posterolateral, and medial malleolus osteotomy and Chaput osteotomy approaches. CONCLUSION: Fracture line and heat map analyses can aid surgeons in planning a single or combined surgical approach for the reduction and internal fixation of talus fractures. Demonstrating the different surgical approaches can help surgeons choose the most effective technique for individual cases.

Primary total talus arthroplasty for Hawkins type IV talar neck fracture dislocation.

A woman in her 40s was involved in a motor vehicle collision and sustained a closed Hawkins type IV talar neck fracture dislocation. The injury was treated with reduction, percutaneous pinning and spanning external fixation, followed by definitive treatment with total talus arthroplasty (TTA) 2 months following injury. This is a unique example of definitive management for a severe talar neck fracture dislocation with arthroplasty in the subacute setting. TTA is perhaps a primary option for these injuries at high risk for avascular necrosis, non-union, malunion and post-traumatic arthritis.

The Influence of Talar Displacement on Articular Contact Mechanics: A 3D Finite Element Analysis Study Using Weightbearing Computed Tomography.

BACKGROUND: Talar displacement is considered the main predictive factor for poor outcomes and the development of post-traumatic osteoarthritis after ankle fractures. Isolated lateral talar translation, as previously studied by Ramsey and Hamilton using carbon powder imprinting, does not fully replicate the multidirectional joint subluxations seen in ankle fractures. The purpose of this study was to analyze the influence of multiple uniplanar talar displacements on tibiotalar contact mechanics utilizing weightbearing computed tomography (WBCT) and finite element analysis (FEA). METHODS: Nineteen subjects (mean age = 37.6 years) with no history of ankle surgery or injury having undergone WBCT arthrogram (n = 1) and WBCT without arthrogram (n = 18) were included. Segmentation of the WBCT images into 3D simulated models of bone and cartilage was performed. Three-dimensional (3D) multiple uniplanar talar displacements were simulated to investigate the respective influence of various uniaxial displacements (including lateral translation, anteroposterior translation, varus-valgus angulation, and external rotation) on the tibiotalar contact mechanics using FEA. Tibiotalar peak contact stress and contact area were modeled for each displacement and its gradations. RESULTS: Our modeling demonstrated that peak contact stress of the talus and tibia increased, whereas contact area decreased, with incremental displacement in all tested directions. Contact stress maps of the talus and tibia were computed for each displacement demonstrating unique patterns of pressure derangement. One millimeter of lateral translation resulted in 14% increase of peak talar contact pressure and a 3% decrease in contact area. CONCLUSION: Our model predicted that with lateral talar translation, there is less noticeable change in tibiotalar contact area compared with prior studies whereas external rotation greater than 12 degrees had the largest effect on peak contact stress predictions. LEVEL OF EVIDENCE: Level V, computational simulation study.

The role of imaging in the diagnosis, staging, and management of the osteochondral lesions of the talus.

Osteochondral lesions of the talus (OLT) represent an abnormality of the articular cartilage and sub-chondral bone. The abnormality is typically associated with trauma though the exact aetiology remains unknown. Multiple staging systems have been developed to classify the abnormality and management can vary from conservative treatment to different surgical options. Early diagnosis is essential for optimal outcome and all imaging modalities have a role to play in patient management. The aim of this article is to review the pathology, classification, multimodality imaging appearances of OLT, and how the imaging affects patient management.

Bilateral Os Trigonum Fracture Treated With Simultaneous Posterior Ankle Arthroscopy.

This is a case report of a 21-year-old female undergraduate student who sustained bilateral ankle injuries while jumping from a moving van wearing 3-inch high heel shoes. Upon initial presentation, her injury was treated conservatively as an acute bilateral ankle sprain for 6 weeks. However, the patient reported no improvement of pain and remained unable to self-ambulate. Bilateral MRI and CT scans of both ankles demonstrated bilateral os trigonum fractures. She underwent bilateral posterior ankle arthroscopic débridement of both os trigonum. At the postoperative 36-month follow-up, the patient reported notable improvement of all functional outcomes (36-item Short Form survey and Foot and Ankle Ability Measure), reported return to the same level of sports activities, and experienced no pain (visual analog scale) on either ankle. This is the first report in the literature of bilateral os trigonum fracture treated with simultaneous posterior ankle arthroscopic débridement.

Os Trigonum Syndrome: A Cause of Posterior Ankle Pain.

BACKGROUND: Os trigonum syndrome represents a cause of posterior ankle pain that is predominantly seen in athletes. The os trigonum ossicle forms from a secondary ossification center of the talus and is located at its posterior aspect in an interval between the posterior lip of the tibial plafond and calcaneus. The os trigonum ossicle is often an incidental finding and asymptomatic. However, repetitive plantarflexion and push-off maneuvers can cause symptoms and lead a patient to pursue orthopedic care. MATERIALS AND METHODS: A review of the literature was conducted using the PubMed search engine with the following keywords: "os trigonum", "os trigonum ossicle", "os trigonum syndrome", "posterior ankle impingement", and "Stieda process". RESULTS: The pertinent anatomy, clinical presentation, diagnostic evaluation, and treatment of os trigonum syndrome were reviewed in the literature and are extensively discussed in this article. CONCLUSION: Os trigonum syndrome represents a potential cause of posterior ankle pain that needs thorough evaluation regarding history, physical examination, and imaging. Once diagnosed, treatment ranges from conservative to surgical interventions depending on surgeon preference and specific case presentation. [Orthopedics. 2024;47(2):e67-e72.].

Talar neck rotation angle in adults with clubfoot deformity: Observed values and intra- and inter-observer reliability using weightbearing CT.

INTRODUCTION: Adults presenting with symptomatic clubfoot represent a challenging cohort of patients. An appreciation of the location and degree of deformities is essential for management. Talar anatomy is often abnormal with varus within the talar neck, however, there are few reproducible methods which quantify talar neck deformity in adults. We describe a technique of assessing talar neck deformity, and report on observed values and intra- / inter-observer reliability. METHODS: This was a single-centre, retrospective study including 96 feet from 56 adult patients with clubfeet (82 feet had clubfoot deformity, 14 were normal). Mean age was 34.3 ± 16.9 years and 31 (55.3%) were male. Weight-bearing CT scans captured as part of routine clinical care were analysed. Image reformats were oriented parallel to the long axis of the talus in the sagittal plane. In the corresponding axial plane two lines were drawn (on separate slices): 1) a line perpendicular to the intermalleolar axis, 2) a line connecting the midpoints of the talar head and narrowest part of the talar neck. The talar neck rotation angle (TNR angle) was the angle formed between these lines. Intraclass correlation coefficients (ICC) were performed for intra- and inter-observer reliability. RESULTS: Mean TNR angle in clubfeet was 27.6 ± 12.2 degrees (95%CI = 25.0 to 30.2 degrees). Mean TNR angle in normal feet was 18.7 ± 5.1 degrees (95%CI = 16.0 to 21.4 degrees) (p < 0.001). The ICC for clubfeet was 0.944 (95%CI = 0.913 to 0.964) for intra-observer agreement, and 0.896 (95%CI = 0.837 to 0.932) for inter-observer agreement. CONCLUSION: This measurement technique demonstrated excellent intra- and inter-observer agreement. It also demonstrated that compared to normal feet, clubfeet had about 9 degrees of increased varus angulation of the talar neck. This technique and data may be used for future research into clubfoot deformity and in planning treatment. LEVEL OF CLINICAL EVIDENCE: 3.