Gunshot-Induced Humeral Head Osteochondral Defect Treated with an Osteochondral Allograft: A Case Report.

CASE: A 25-year-old right-hand dominant male police officer presented to the emergency department with a gunshot wound to his left shoulder. Magnetic resonance imaging demonstrated an osteochondral defect overlying the humeral head along the mid to lower aspect of the glenohumeral joint. A staged operation with shoulder arthroscopy followed by an osteochondral allograft (OCA) of the humeral head was performed. During his 6-month postoperative visit, he had returned to full work duty with no restrictions and reported that his pain was well controlled. CONCLUSION: Humeral head OCA transplantation may be an effective treatment option for traumatic osteochondral lesions of the glenohumeral joint.

Shoulder MRI parameters in anticipating anterior shoulder dislocation: Are they a reliable and reproducible tool in clinical practice?

BACKGROUND: Anterior shoulder dislocation (ASD) is a frequently observed musculoskeletal injury that is often encountered in the context of sports activities or as a result of trauma. Several magnetic resonance imaging (MRI) parameters have been previously investigated for the purpose of characterizing the anatomical features, which could potentially be responsible for the episodes of instability. These measurements have the potential to identify patients who are susceptible to dislocation. Consequently, ensuring the reliability and consistency of these measurements is crucial in the diagnosis and the management of athletic or traumatic shoulder injuries. METHODS: A group of four students, who had no previous experience in reading MRI series, were selected to perform radiographic measurements on specific parameters of MRI scans. These parameters were glenoid version, glenoid depth, glenoid width, humeral head diameter, humeral containing angle, and the ratio of humeral head diameter to glenoid diameter. The four participants conducted two distinct readings on a total of 28 sets of shoulder MRI scans. Simultaneously, the aforementioned measures were assessed by a consultant shoulder surgeon. RESULTS: A total of 1512 measurements were categorized into nine sets: eight from students' measurements (two per student) and one from the consultant. Intra-rater reliability assessed by the intra-class correlation (ICC) test indicated excellent or good reliability for all parameters (p < 0.05), with glenoid depth showing the highest (0.925) and humeral-containing angles the lowest (0.675) ICC value. Inter-rater correlation, also evaluated using ICC, demonstrated strong correlation (p < 0.05), with glenoid diameter having the highest ICC score (0.935) and glenoid depth the lowest (0.849). Agreement analysis, expressed by Cohen's Kappa test, revealed substantial agreement (p < 0.05) for all parameters, with humeral head diameter having the highest agreement (0.90) and humeral-containing angle the lowest (0.73). CONCLUSION: In this study, intra- and inter-rater MRI parameters are substantially concordant. Credibility comes from these reliability and agreement analyses' statistical significance. Glenoid diameter and depth are the most reliable intrarater and interrater, respectively. Best agreement was with the humeral-containing angle. These data demonstrate repeatability and clinical relevance. LEVEL OF EVIDENCE: Level IV.

The Fate of the Shoulder Post Rotator Cuff Repair: Biomechanical Properties of the Supraspinatus Tendon and Surrounding Structures.

The study aimed to describe the changes in biomechanical properties of the supraspinatus tendon, deltoid muscle, and humeral head post arthroscopic rotator cuff repair using shear wave elastography. Shear wave velocity of the tendon, deltoid, and humeral head of 48 patients was measured at predetermined sites at 1 week, 6 weeks, 12 weeks, 6 months, and 12 months post repair. One-way ANOVA with Tukey's correction and Spearman's correlation were performed. Mean±SEM healing tendon stiffness, adjacent to tendon footprint, increased from 1 week (6.2±0.2 m/s) to 6 months (7.5±0.3 m/s) and 12 months (7.8±0.3 m/s) (P<0.001). Mean±SEM deltoid muscle stiffness was higher at 12 months (4.1±0.2 m/s) compared to 1 week (3.4±0.1 m/s) and 12 weeks (3.5±0.1 m/s) (P<0.05). Humeral head stiffness did not change. Following arthroscopic rotator cuff repair, supraspinatus tendon stiffness increased in a curvilinear fashion over 6 months. From 6 months, deltoid muscle stiffness increased, corresponding to when patients were instructed to return to normal activities.

Revision rate in metal compared to ceramic humeral head total shoulder arthroplasty and hemiarthroplasty.

Aims: Metal and ceramic humeral head bearing surfaces are available choices in anatomical shoulder arthroplasties. Wear studies have shown superior performance of ceramic heads, however comparison of clinical outcomes according to bearing surface in total shoulder arthroplasty (TSA) and hemiarthroplasty (HA) is limited. This study aimed to compare the rates of revision and reoperation following metal and ceramic humeral head TSA and HA using data from the National Joint Registry (NJR), which collects data from England, Wales, Northern Ireland, Isle of Man and the States of Guernsey. Methods: NJR shoulder arthroplasty records were linked to Hospital Episode Statistics and the National Mortality Register. TSA and HA performed for osteoarthritis (OA) in patients with an intact rotator cuff were included. Metal and ceramic humeral head prostheses were matched within separate TSA and HA groups using propensity scores based on 12 and 11 characteristics, respectively. The primary outcome was time to first revision and the secondary outcome was non-revision reoperation. Results: A total of 4,799 TSAs (3,578 metal, 1,221 ceramic) and 1,363 HAs (1,020 metal, 343 ceramic) were included. The rate of revision was higher for metal compared with ceramic TSA, hazard ratio (HR) 3.31 (95% confidence interval (CI) 1.67 to 6.58). At eight years, prosthesis survival for ceramic TSA was 98.7% (95% CI 97.3 to 99.4) compared with 96.4% (95% CI 95.2 to 97.3) for metal TSA. The majority of revision TSAs were for cuff insufficiency or instability/dislocation. There was no significant difference in the revision rate for ceramic compared with metal head HA (HR 1.33 (95% CI 0.76 to 2.34)). For ceramic HA, eight-year prosthetic survival was 92.8% (95% CI 86.9 to 96.1), compared with 91.6% (95% CI 89.3 to 93.5) for metal HA. The majority of revision HAs were for cuff failure. Conclusion: The rate of all-cause revision was higher following metal compared with ceramic humeral head TSA in patients with OA and an intact rotator cuff. There was no difference in the revision rate for HA according to bearing surface.

Management of Bone Loss in Posterior Glenohumeral Shoulder Instability: Current Concepts.

¼ Posterior glenohumeral instability is relatively uncommon compared with anterior instability, but is becoming an increasingly recognized and surgically managed shoulder pathology.¼ Soft-tissue stabilization alone may not be sufficient in patients who present with substantial bone loss to the posterior glenoid and/or the anterior humeral head.¼ For posterior glenoid defects, posterior glenoid osteoarticular augmentation can be used, and posterior glenoid opening wedge osteotomy can be considered in cases of posterior instability with pathologic retroversion.¼ For humeral head lesions, several surgical treatment options are available including subscapularis transposition into the humeral head defect, autograft or allograft reconstruction, humeral rotation osteotomy, and shoulder arthroplasty.

Minimal but potentially clinically relevant anteroinferior position of the humeral head following traumatic anterior shoulder dislocations: A 3D-CT analysis.

In unstable shoulders, excessive anteroinferior position of the humeral head relative to the glenoid can lead to a dislocation. Measuring humeral head position could therefore be valuable in quantifying shoulder laxity. The aim of this study was to measure (1) position of the humeral head relative to the glenoid and (2) joint space thickness during passive motion in unstable shoulders caused by traumatic anterior dislocations and in contralateral uninjured shoulders. A prospective cross-sectional CT-study was performed in patients with unilateral anterior shoulder instability. Patients underwent CT scanning of both injured and uninjured side in supine position (0° abduction and 0° external rotation) and in 60°, 90°, and 120° of abduction with 90° of external rotation without an external load. Subsequently, 3D virtual models were created of the humerus and the scapula to create a glenoid coordinate system to identify poster-anterior, inferior-superior, and lateral-medial position of the humeral head relative to the glenoid. Joint space thickness was defined as the average distance between the subchondral bone surfaces of the humeral head and glenoid. Fifteen consecutive patients were included. In supine position, the humeral head was positioned more anteriorly (p = 0.004), inferiorly (p = 0.019), and laterally (p = 0.021) in the injured compared to the uninjured shoulder. No differences were observed in any of the other positions. A joint-space thickness map, showing the bone-to-bone distances, identified the Hill-Sachs lesion footprint on the glenoid surface in external rotation and abduction, but no differences on average joint space thickness were observed in any position.

How anatomic should anatomic total shoulder arthroplasty be? Evaluation of humeral head reconstruction with the best-fit circle.

BACKGROUND: Humeral implant designs for anatomic total shoulder arthroplasty (aTSA) focus on anatomic reconstruction of the articular segment. Likewise, the pathoanatomy of advanced glenohumeral osteoarthritis often results in humeral head deformity. We hypothesized the anatomic reconstruction of the humeral head in aTSA risks overstuffing the glenohumeral joint. METHODS: Ninety-seven cases (52 females) of primary glenohumeral osteoarthritis in patients treated with aTSA were evaluated. Preoperative computed tomography scans were used to classify glenoid morphology according to the Walch classification. Coronal plane images in the plane of the humerus were used to determine the anatomic best-fit circle as described by Youderian et al. Humeral head thinning was determined as the distance from the center of rotation of the best-fit circle to the nearest point along the humeral articular surface. aTSA was modeled with a predicted anatomic humeral head and a simulated 4-mm polyethylene glenoid component. The change in the position of the native humerus was determined. Wilcoxon Rank Sum tests were used to evaluate differences in humeral head thinning and humeral lateralization between monoconcave and biconcave glenoid morphologies. Spearman's rank correlation coefficients were used to assess the relationship between humeral head thinning with preoperative active forward elevation and external rotation. RESULTS: The mean radius of the best-fit circle was 25.0 ± 2.1 mm. There was a mean thinning of 2.4 ± 2.0 mm (range -1.7 to 8.3). The mean percent thinning of the humeral head was 9.4% ± 7.7%. The mean humeral lateralization was 6.4 ± 2.0 mm. Humeral head thinning was not significantly associated with active forward elevation (r = -0.15, P = .14) or active external rotation (r = -0.12, P = .25). There were no significant differences in the percentage of humeral head thinning (P = .324) or humeral lateralization (P = .350) between concentric and eccentric glenoid wear patterns. CONCLUSIONS: Utilization of the best-fit circle as a guide in aTSA may risk excessive lateralization of the humerus and overstuffing the glenohumeral joint. This may have implications for subscapularis repair and healing, as well as glenoid implant and rotator cuff longevity. These findings call into question whether recreation of normal glenohumeral anatomy in aTSA is appropriate for all patients. Humeral head reconstruction in aTSA should account for glenohumeral joint volume and soft tissue contracture.

The Global Track Concept for Assessment of Engaging Hill-Sachs Defects in Anterior Shoulder Instability.

BACKGROUND: The glenoid track concept is used to determine preoperatively whether a Hill-Sachs defect is engaging or not. Currently, the glenoid track concept relies on measurements of bony structures as well as on the confines and elasticity of the rotator cuff as a reference point, which varies extensively among individuals and therefore limits the reliability and accuracy of this concept. PURPOSE: To evaluate the reliability of the global track concept, which determines the angular distance of the Hill-Sachs defect from the center of the articular surface of the humeral head as a new reference point with the help of an automated image analysis software and 3-dimensional analysis of the humeral head. STUDY DESIGN: Controlled laboratory study. METHODS: Computed tomography scans of 100 patients treated for anterior shoulder instability with different sizes of Hill-Sachs defects were evaluated manually by 2 orthopaedic surgeons independently using the software OsiriX as well as automatically by using a dedicated prototype software (ImFusion). Obtained manual and automated measurements included the Hill-Sachs length, Hill-Sachs width, and Hill-Sachs depth of the defect; the Hill-Sachs interval (HSI); and the glenoid width for the glenoid track concept, as well as the angular distance of the Hill-Sachs defect from the center of the articular surface of the humeral head (global track concept). The reliability of the different measurement techniques was compared by calculating intraclass correlation coefficients (ICCs). RESULTS: There was a significant difference for all obtained parameters comparing manual and automatic measurements. For manually obtained parameters, measurements referring to bony boundaries (glenoid width, Hill-Sachs length, and Hill-Sachs width) showed good to excellent agreement (ICC, 0.86, 0.82, and 0.62, respectively), while measurements referring to soft tissue boundaries (HSI and glenoid track; ICC, 0.56 and 0.53, respectively) or not directly identifiable reference points (center of articular surface and global track) only showed fair reliability (ICC middle excursion, 0.42). When the same parameters were measured with the help of an automated software, good reliability for the glenoid track concept and excellent reliability for the global track concept in the middle excursion were achieved. CONCLUSION: The present study showed that the more complex global track measurements of humeral defects are more reliable than the current standard HSI and glenoid track measurements. However, this is only true when automated software is used to perform the measurements. CLINICAL RELEVANCE: Future studies using the new proposed method in combination with an automated software need to be conducted to determine critical threshold values for defects prone to engagement.

Effects of humeral head stabilization intervention during aggressive manual passive stretching exercises in patients with painful stiff shoulder: a prospective, comparative study.

BACKGROUND: No reports have been published verifying the effects of manual interventions such as humeral head stabilization on improving function and reducing pain when applying aggressive manual passive stretching in patients with painful stiff shoulders. The purpose of this study was to compare clinical outcomes, such as range of motion, pain, and disability scores, in patients with painful stiff shoulders with and without humeral head stabilization intervention while applying aggressive manual passive stretching. METHODS: Fifty-six patients with painful stiff shoulders were recruited (31 with humeral head stabilization intervention and 25 without such intervention). Clinical outcomes such as active range of motion (A-ROM), pain, and disability scores were evaluated using a goniometer; measurement of activity visual analog scale (A-VAS); and Disabilities of the Arm, Shoulder and Hand (DASH) and Shoulder Pain and Disability Index (SPADI), respectively. RESULTS: All the parameters, A-ROM, A-VAS, and disability scores (DASH and SPADI) were not significantly different between the 2 groups (P > .05) before the intervention. However, after the intervention, the mean difference in A-ROM for flexion, abduction, and external and internal rotation was 18 (95% confidence interval [CI], 14.1-21.7), 31 (95% CI, 24.9-37.4), 17 (95% CI, 13.4-21.4), and 16 (95% CI, 11.6-20.9), respectively. The mean difference in A-VAS and disability scores for DASH and SPADI was -1 (95% CI, -1.5 to -0.8), -27 (95% CI, 32.3 to -22.6), and -23 (95% CI, -27.8 to -18.3), respectively. All of these measurements favored humeral head stabilization. CONCLUSION: During aggressive manual passive stretching in patients with painful stiff shoulders, humeral head stabilization intervention may be more beneficial in improving clinical outcomes such as A-ROM, A-VAS pain levels, and disability scores.

The morphometric parameters of the biceps brachii: cadaveric study.

BACKGROUND: The biceps brachii (BB) is a fusiform muscle comprising of two muscular bellies located in the anterior compartment of the arm. Its primary function includes elbow flexion and forearm supination. PURPOSE: The study aimed to examine the morphometric parameters of the BB in adult cadaveric specimens. METHODS: This dissection-based study examined the anatomy of the BB in 40 arms taken from 20 Thiel embalmed European cadavers, including 13 males with an average age of 81 years and seven females with an average age of 84 years. The investigation included an observational inspection of the BB morphology and collected 19 parameters, comprising the lengths and widths of the short and long head tendons and muscle bellies. RESULTS: The observation analysis showed that the anatomy of the BB consisted mainly of two muscle bellies: a short head and a long head. An additional third humeral head, originating from the anteromedial aspect of the mid of the humerus and inserted into the common biceps tendon, was observed in four (10%) specimens. The average lengths of the short head and long head were 35.98 ± 3.44 cm and 38.90 ± 3.40 cm, respectively. There was no difference in the BB parameters according to the arm sides. However, the male specimens showed greater BB parameters than the female specimens. CONCLUSION: The short head had a greater muscle belly, while the long head had a longer origin and insertion tendons. The BB parameters were correlated positively with the humerus length.

[Clinical effect of allogeneic peroneal bone marrow support combined with plate fixation for the treatment of Neer type â £ proximal humeral fractures].

OBJECTIVE: To explore clinical effect of allogeneic peroneal bone marrow support combined with plate internal fixation in treating Neer type Ⅳproximal humeral fractures. METHODS: From December 2017 to December 2020,12 patients with Neer type Ⅳ proximal humeral fractures were treated with allogeneic peroneal bone marrow support combined with plate internal fixation,including 7 males and 5 females,aged from 56 to 78 years old;the time from injury to operation ranged from 1 to7 days. Operative time,fracture healing time and complications during follow-up were observed,and clinical efficacy was evaluated by Constant-Murley score at the latest follow-up. RESULTS: All patients were obtained follow up for 20 to 29 months. All patients got bone healing and incisicons were healed at stageⅠ,operative time ranged from 95 to 138 min,blood loss ranged from 210 to 275 ml,fracture healing time ranged from 14 to 18 weeks. Two patients occurred postoperative shoulder stiffness and recovered after 2 weeks of passive exercise. There were no complications such as infection,poor wound healing,and failure (fracture and loosening) of internal fixators occurred. Constant-Murley shoulder function score ranged from 69 to 89 at the latest follow up,2 patients got excellent results,9 good and 1 fair. CONCLUSION: The application of allogeneic fibular bone marrow placement could provide effective support for medial humerus,which is conducive to assisting reduction of fracture end,reducing occurrence of internal fixation failure caused by collapse of humerus head and screw perforation,and significantly improving function of shoulder joint.

Mid-term outcomes of microfracture for the treatment of focal, full-thickness cartilage defects isolated to the humeral head.

BACKGROUND: While microfracture has been shown to be an effective treatment for chondral lesions in the knee, evidence to support its use for chondral defects in the shoulder is limited to short-term outcomes studies. The purpose of this study is to determine if microfracture provides pain relief and improved shoulder function in patients with isolated focal chondral defects of the humeral head at a minimum 5-year follow-up. METHODS: Patients who underwent microfracture procedure for isolated focal chondral defects of the humeral head with a minimum follow-up of 5 years between 02/2006 and 08/2016 were included. At minimum 5-year follow-up, pre- and postoperative patient-reported outcome (PRO) measures were collected, including the American Shoulder and Elbow Surgeons (ASES), Single Assessment Numeric Evaluation (SANE), Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH), Short Form-12 (SF-12) Physical Component Summary (PCS), Visual Analog Scale (VAS) for pain, and patient satisfaction level (1 = unsatisfied, 10 = very satisfied). Demographic, injury, and surgical data were retrospectively reviewed. Surgical failure was defined as revision surgery for humeral chondral defects or conversion to arthroplasty. Kaplan-Meier analysis was performed to determine survivorship at 5 years. RESULTS: A total of 17 patients met inclusion/exclusion criteria. There were 15 men and 2 women with an average age of 51 years (range 36-69) and an average follow-up of 9.4 years (range 5.0-15.8). The median ASES score improved from 62 (range: 22-88) preoperatively to 90 (range: 50-100) postoperatively (P = .011). Median satisfaction was 8 out of 10 (range: 2-10). There was no correlation between patient age or defect size and PROs. Postoperatively, patients reported significant improvements in recreational and sporting activity as well as the ability to sleep on the affected shoulder (P ≤ .05). Three patients failed and required revision surgery. The Kaplan-Meier analysis determined an overall survivorship rate of 80% at 5 years. CONCLUSION: The presented study illustrates significant improvements for PROs, improved ability to perform recreational and sporting activities, and a survival rate of 80% at a mean of 9.4 years after microfracture for focal chondral humeral head defects.

A Posterior Acromial Bone Block Augmentation Is Biomechanically Effective at Restoring the Force Required To Translate the Humeral Head Posteriorly in a Cadaveric, Posterior Glenohumeral Instability Model.

PURPOSE: To assess the biomechanical utility of a posterior acromial bone block (PABB) for the treatment of posterior glenohumeral instability. METHODS: Ten fresh-frozen cadaveric specimens were obtained based upon an a priori power analysis. A 2.5-cm scapular spine autograft was harvested from all shoulders. A custom robot device was used to apply a 50-N compressive force to the glenohumeral joint. The humeral head was translated 10 mm posteroinferiorly at 30 degrees from the center of the glenoid at a rate of 1.0 mm/s in 6 consecutive conditions: (1) intact specimen, (2) intact with PABB, (3) posterior capsulolabral tear, (4) addition of the PABB, (5) removal of the PABB and repair of the capsulolabral tear (LR), and (6) addition of the PABB with LR. The maximum force required to obtain this translation was recorded. Paired t tests were performed to compare relevant testing conditions. RESULTS: Ten cadavers with a mean ± SD age of 54.4 ± 13.1 years and mean ± SD glenoid retroversion of 6.5 ± 1.0 degrees were studied. The PABB provided greater resistance force to humeral head translation compared to the instability state (instability, 29.3 ± 15.3 N vs PABB, 47.6 ± 21.0 N; P = .001; 95% confidence interval [CI], -27.6 to -10.0). When comparing PABB to LR, the PABB produced higher resistance force than LR alone (PABB, 47.6 ± 21.0 N; LR, 34.2 ± 20.5 N; P = .012; 95% CI, -23.4 to -4.1). An instability lesion treated with the PABB, with LR (P = .056; 95% CI, -0.30 to 20.4) or without LR (P = .351; 95% CI, -6.8 to 15.7), produced resistance forces similar to the intact specimen. CONCLUSIONS: A PABB is biomechanically effective at restoring the force required to translate the humeral head posteriorly in a cadaveric, posterior glenohumeral instability model. A posterior acromial bone block is a biomechanically feasible option to consider in patients with recurrent posterior instability. CLINICAL RELEVANCE: Augmentation of the posterior acromion may be a biomechanically feasible option to treat posterior shoulder instability.

Defining Critical Humeral Bone Loss: Inferior Craniocaudal Hill-Sachs Extension as Predictor of Recurrent Instability After Primary Arthroscopic Bankart Repair.

BACKGROUND: The glenoid track concept for shoulder instability primarily describes the medial-lateral relationship between a Hill-Sachs lesion and the glenoid. However, the Hill-Sachs position in the craniocaudal dimension has not been thoroughly studied. HYPOTHESIS: Hill-Sachs lesions with greater inferior extension are associated with increased risk of recurrent instability after primary arthroscopic Bankart repair. STUDY DESIGN: Case-control study; Level of evidence, 3. METHODS: The authors performed a retrospective analysis of patients with on-track Hill-Sachs lesions who underwent primary arthroscopic Bankart repair (without remplissage) between 2007 and 2019 and had a minimum 2-year follow-up. Recurrent instability was defined as recurrent dislocation or subluxation after the index procedure. The craniocaudal position of the Hill-Sachs lesion was measured against the midhumeral axis on sagittal magnetic resonance imaging (MRI) using either a Hill-Sachs bisecting line through the humeral head center (sagittal midpoint angle [SMA], a measure of Hill-Sachs craniocaudal position) or a line tangent to the inferior Hill-Sachs edge (lower-edge angle [LEA], a measure of Hill-Sachs caudal extension). Univariate and multivariate regression were used to determine the predictive value of both SMA and LEA for recurrent instability. RESULTS: In total, 176 patients were included with a mean age of 20.6 years, mean follow-up of 5.9 years, and contact sport participation of 69.3%. Of these patients, 42 (23.9%) experienced recurrent instability (30 dislocations, 12 subluxations) at a mean time of 1.7 years after surgery. Recurrent instability was found to be significantly associated with LEA >90° (ie, Hill-Sachs lesions extending below the humeral head equator), with an OR of 3.29 (P = .022). SMA predicted recurrent instability to a lesser degree (OR, 2.22; P = .052). Post hoc evaluation demonstrated that LEA >90° predicted recurrent dislocations (subset of recurrent instability) with an OR of 4.80 (P = .003). LEA and SMA were found to be collinear with Hill-Sachs interval and distance to dislocation, suggesting that greater LEA and SMA proportionally reflect lesion severity in both the craniocaudal and medial-lateral dimensions. CONCLUSION: Inferior extension of an otherwise on-track Hill-Sachs lesion is a highly predictive risk factor for recurrent instability after primary arthroscopic Bankart repair. Evaluation of Hill-Sachs extension below the humeral equator (inferior equatorial extension) on sagittal MRI is a clinically facile screening tool for higher-risk lesions with subcritical glenoid bone loss. This threshold for critical humeral bone loss may inform surgical stratification for procedures such as remplissage or other approaches for at-risk on-track lesions.

Assessing complications and functional outcomes in proximal humerus fracture management: a retrospective comparison between conservative and intramedullary nailing treatments.

INTRODUCTION: Fractures of the proximal end of the humerus (FPH) are the second most common fractures in the upper limb after fractures of the distal radius and are two to three times as common in women than in men. Therefore, the main objective of the present study was to compare and analyze the complications and the functional outcomes in patients with displaced FPH receiving conservative and surgical treatments with intramedullary nailing. METHODS: A retrospective cross-sectional study was conducted to establish the differences in complications risks between surgical and non-surgical treatment of the FPH. For this purpose, the clinical and radiological results of 67 consecutive patients were analyzed. RESULTS: A total of 25 patients were included in the non-surgically treated group. A total of 42 patients were included in the surgically treated group. Complications occurred in a total of 4 (16.0%) patients after the non-surgical treatment. Those included frozen shoulder (n = 2), nonunion (n = 1), and avascular necrosis of the humeral head (n = 1). Complications occurred in a total of 18 (42.6%) patients after the surgical treatment. Non-surgically treated patients had statistically significantly (p < 0.05) lower scores in the Constant-Murley scale in all of the categories. CONCLUSION: The present study demonstrates an overall prevalence of complications to be 16% in patients treated conservatively and 42.6% in patients treated surgically. In the non-surgical cohort, the frozen shoulder was the most frequently observed complication (8%). Interestingly, non-anatomical repositioning was the most prevalent complication in surgically treated patients. Due to the complexity of the FPH, we believe that the surgeon needs to have comprehensive knowledge regarding the characteristics of this fracture, the available treatment options, and the possible complications that may occur. This can enhance patient safety and provide satisfactory clinical outcomes.

Risk factors for osteonecrosis of the humeral head after internal fixation of proximal humeral fractures: a systematic review and meta-analysis.

BACKGROUND: Osteonecrosis of the humeral head (ONHH) is a severe complication after the internal fixation of proximal humeral fractures (IFPHF). The risk factors remain controversial though many studies have reported. In this research, meta-analysis was used to evaluate which surgeon-level factors can be modified to lower the risk and we hope to provide evidence-based support for preventing ONHH. METHODS: Literature was retrieved from PubMed, Cochrane Library, Embase, Web of Science, and Scopus for eligible studies published up to January 2023. The pooled odds ratios (ORs) were calculated with their corresponding 95% confidence intervals (CIs) to evaluate. STATA 15.1 software was applied for data synthesis, sensitivity synthesis, and publication bias. RESULTS: 45 articles were published between 2000 and 2022, and 2482 patients were finally included. All articles were observational research, with 7 case-control studies and 38 cohort studies, and the Newcastle Ottawa Scale (NOS) score ranged from 7 to 9. The pooled results suggested that age (OR 0.32, 95% CI 0.14-0.74, P = 0.01), reduction quality (OR 0.08, 95% CI 0.01-0.44, P = 0.00), fracture type (OR 0.44, 95% CI 0.25-0.78, P = 0.01), surgical approach (OR: 4.06, 95% CI 1.21-13.61, P = 0.02) and fixation implant (OR = 0.68, 95% CI = 0.34-1.33, P = 0.02) were risk factors for ONHH after IFPHF. According to sensitivity analysis, Begg (P = 0.42) and Egger (P = 0.68) tests, the results were stable and exhibited no publication bias. CONCLUSIONS: The study showed that age, reduction quality, fracture type, surgical approach and fixation implant were risk factors for ONHH after IFPHF, while gender, varus or valgus, timely operation, injured side, and the existence of medial support have little influence on ONHH, as they could not be considered risk factors and still need further investigations.

The arthroscopic double-button Latarjet does not modify the static posterior translation of the humeral head.

INTRODUCTION: The Latarjet procedure treats anterior instability of the shoulder and is based on a triple anterior lock, where the conjoint tendon straps the lower third of the subscapularis muscle. Excessive posterior translation of the humeral head is a known risk factor for shoulder osteoarthritis. No in vivo study has investigated the effect of the bone block on the posterior static translation of the humeral epiphysis. The purpose of this study was to evaluate the effect of the bone block on the static posterior translation of the humeral head. The hypothesis was that this procedure increased this translation. MATERIALS AND METHODS: This retrospective study included patients treated arthroscopically for anterior shoulder instability by a double-button Latarjet. An independent examiner analyzed the CT scans preoperatively, at 15 days, and at least 6 months postoperatively according to a standardized protocol. The analysis focused on the position of the bone block in the axial and coronal planes relative to the glenoid. The posterior translation was automatically calculated using the Blueprint© planning software. RESULTS: Thirty-five patients were included with a mean age of 25 years (16-43), according to a 4M/1F sex ratio. The graft was perfectly flush to the subchondral bone in 63% (n=22) of cases and subequatorial in 91% (n=32). Preoperative posterior humeral translation was 52%. The mean immediate postoperative posterior humeral translation was 56%, and 57% at more than 6 months. The change in mean posterior humeral translation between preoperative/6 months was +0.94% [-20%; +12%] (p=0.29) and immediate postoperative/6 months +0.34% [-18%; +15%] (p=0.84). Gender, hypermobility and the axial position of the bone block did not influence the change in posterior humeral translation. The equatorial position of the bone block appeared to increase posterior humeral translation by +10%±5.2% [-0.427; 20.823] (p=0.07). CONCLUSION: This work refutes our initial hypothesis. The change in static posterior humeral translation after arthroscopic Latarjet bone block remains stable at more than 6 months of follow-up. This procedure does not alter the anatomical position of the humeral head in relation to the glenoid. On the other hand, a more cranial positioning of the bone block could have an influence. LEVEL OF EVIDENCE: IV.

Endosteal strut using a hydroxyapatite/poly-L-lactide mesh tube with a proximal humeral locking plate for the treatment of proximal humeral fractures.

PURPOSE: Proximal humeral fractures cause large intramedullary bone defects after humeral-head reduction. Hydroxyapatite/poly-L-lactide (HA/PLLA) materials are widely used for various fractures. However, the efficacy of endosteal strut using a HA/PLLA mesh tube (ES-HA/PLLA) with a locking plate for treating proximal humeral fractures was not reported. The purpose of this study is to examine the efficacy of ES-HA/PLLA with a proximal humeral locking plate in proximal humeral fractures. METHODS: Seventeen patients with proximal humeral fractures treated using ES-HA/PLLA with a locking plate from November 2017 to November 2021 were evaluated. The range of motion of the shoulder and postoperative complications were assessed at the final follow-up. Radiographs were evaluated to assess bone union and loss of reduction by measuring humeral-head height (HHH) and humeral neck-shaft angle (NSA). RESULTS: The average flexion and external rotation of the shoulder at the final follow-up were 137° (range, 90-180°) and 39° (range, - 10 to 60°), respectively. All fractures were united. The average HHH and NSA just after the surgery and final follow-up were 12.5 mm and 11.6 mm and 129.9° and 127.4°, respectively. Two patients presented screw perforation of the humeral head. One patient underwent implant removal due to infection. Avascular necrosis of the humeral head was observed in one patient with arthritis mutilans. CONCLUSIONS: The use of ES-HA/PLLA with a proximal humeral locking plate resulted in bone union in all patients and prevented postoperative loss of reduction. ES-HA/PLLA is one of the treatment options for proximal humeral fractures.

Pyrocarbon humeral heads for hemishoulder arthroplasty grant satisfactory clinical scores with minimal glenoid erosion at 5-9 years of follow-up.

BACKGROUND: Hemishoulder arthroplasty (HSA) is a more conservative alternative to total shoulder arthroplasty for young and active patients with minimal glenoid erosion or deformity. Pyrocarbon humeral heads were introduced as an alternative to metallic humeral heads, which were associated with glenoid erosion in 28%-43%. The purpose of this study was to evaluate the progression of glenoid erosion and clinical scores of HSA using pyrocarbon humeral heads from short- (2-4 years) to midterm (5-9 years). METHODS: We retrieved the records of 45 consecutive patients who underwent HSA with pyrocarbon humeral heads from 2013 to 2017. Patients were evaluated radiographically and clinically at a first follow-up (2-4 years) and a second follow-up (5-9 years). Preoperative glenoid morphology was assessed using computed tomography scans, and glenoid erosion was assessed using plain radiographs according to Sperling et al. The Constant score (CS), American Shoulder and Elbow Surgeons (ASES) score, and Subjective Shoulder Value (SSV) score were assessed by an independent observer. RESULTS: From the initial cohort of 45 patients, 2 underwent revision surgery (4.4%) due to persistent pain (without signs of rotator cuff pathology or glenoid erosion) and 6 were lost to follow-up (13%), leaving 37 for outcome assessment (82%). At the first follow-up of 2.2 ± 0.4 years, all clinical scores improved substantially (CS from 29.3 ± 13.5 to 76.7 ± 14.4, ASES from 23.7 ± 15.6 to 87.0 ± 16.0, and SSV from 25.3 ± 12.2 to 84.1 ± 15.2), and at the second follow-up of 6.2 ± 1.2 years, good clinical scores were maintained (CS from 76.7 ± 14.4 to 80.8 ± 16.0, ASES from 87.0 ± 16.0 to 92.3 ± 15.0, and SSV from 84.1 ± 15.2 to 82.8 ± 18.3). At the second follow-up, glenoid erosion was moderate in 9 (24%) and severe in 3 (8.1%). When comparing with immediate postoperative radiographs, 10 shoulders exhibited progression of glenoid erosion by 1 grade (n = 9) or 2 grades (n = 1). CONCLUSION: Pyrocarbon humeral heads for HSA grant satisfactory clinical scores with minimal glenoid erosion.

A prognostic classification of proximal humerus fractures: the cephalic extension staging.

PURPOSE: Recent publications emphasized the role of dorsomedial metaphyseal extension of humeral head as predictor of ischemia after complex proximal humerus fractures (PHFs). We evaluated on preoperative 3D CT scan of PHFs the surface of this metaphyseal extension and its prognostic value on the occurrence of avascular necrosis (AVN). METHODS: We followed a series of 25 fixations of complex PHF which had a preoperative 3D CT scan and measured the surface area of the posterior metaphyseal extension (PME) of the head. Using approximations, we calculated the ratio between the PME surface area (PMS) and the articular surface area of the head (HS). The PMS/HS ratio was analyzed against the risk of AVN. RESULTS: The measurement of the PMS/HS ratio emphasizes the significance of PME. The incidence of AVN is correlated with the magnitude of PME. Therefore, we include the PME as a fifth element in the characterization of complex PHFs and we propose a 4-stage prognostic classification based on the number of extensions of the humeral head. The head may have 3 extensions: posteromedial (PME), lesser tuberosity (LTE) and greater tuberosity (GTE). The risk of AVN decreases with the number of extensions of the head. CONCLUSION: Our study demonstrates a correlation between the occurrence of AVN and the size of PME in complex PHF cases. We propose a four-stage classification system to facilitate treatment decision-making between fixation and prosthesis.