Identification of a Regenerative Protocol for Recellularizing Human Auricular Cartilage Scaffolds.

OBJECTIVE: Utilizing biological scaffolds for cartilage tissue engineering is a promising tool for improving auricular reconstruction. Decellularized auricular scaffolds provide a means of regenerating cartilage for in vivo implantation, but identifying the ideal regenerative mix remains challenging. METHODS: Human cadaver auricular cartilage was decellularized and recellularized with either auricular chondrocytes alone, auricular chondrocytes with adipose-derived stem cells, or both cells with platelet-rich plasma. Confirmation of decellularization and recellularization was done by hematoxylin and eosin staining. Extracellular matrix preservation and production were determined by Masson's trichrome, Alcian blue, and Verhoeff-van Gieson staining. Collagen II assessments were made using immunohistochemistry. RESULTS: Decellularization of cadaver auricular cartilage was confirmed by the absence of cells, reduction in glycosaminoglycans, and the preservation of collagen and elastin. Recellularization was more efficient when chondrocytes were seeded with adipose-derived stem cells, which was enhanced by adding platelet-rich plasma. Coculture with platelet-rich plasma yielded better total collagen (56% increase) and glycosaminoglycan (47% increase) induction. Moreover, when platelet-rich plasma was added, collagen II induction was significantly increased (42%; P < 0.05). CONCLUSION: We identified a regenerative protocol that included auricular chondrocytes, adipose-derived stem cells, and platelet-rich plasma, which stimulated chondrogenesis on decellularized auricular cartilage. This finding provides a model to explore cartilage formation and the potential for improving auricular and cartilage-based reconstruction.

A human cadaveric model for venous air embolism detection tool development.

PURPOSE: A human cadaveric model combining standard lung protective mechanical ventilation and modified cardiac bypass techniques was developed to allow investigation into automated modes of detection of venous air emboli (VAE) prior to in vivo human or animal investigations. METHODS: In this study, in order to create an artificial cardiopulmonary circuit in a cadaver that could mimic VAE physiology, the direction of flow was reversed from conventional cardiac bypass. Normal saline was circulated in isolation through the heart and lungs as opposed to the peripheral organs by placing the venous cannula into the aorta and the arterial cannula into the inferior vena cava with selective ligation of other vessels. RESULTS: Mechanical ventilation and this reversed cardiac bypass scheme allowed preliminary detection of VAE independently but not in concert in our current simulation scheme due to pulmonary edema in the cadaver. A limited dissection approach was used initially followed by a radical exposure of the great vessels, and both proved feasible in terms of air signal detection. We used electrical impendence as a preliminary tool to validate detection in this cadaveric model however we theorize that it would work for echocardiographic, intravenous ultrasound or other novel modalities as well. CONCLUSION: A cadaveric model allows monitoring technology development with reduced use of animal and conventional human testing.

A double communication branch between musculocutaneous and median nerves: first case report, anatomical study, and comprehensive review of clinical implications.

BACKGROUND: According to the literature, the brachial plexus presents a high rate of anatomical variations in the human neural system. The musculocutaneous nerve, a vital component of the brachial plexus, exhibits significant anatomical variations that hold clinical relevance across multiple medical disciplines. This case report, with a comprehensive review, explores the different variations in the course, branching patterns, and clinical implications of the musculocutaneous nerve. Understanding these variations is essential for surgeons, radiologists, and clinicians to enhance surgical precision, improve diagnostic accuracy, and reduce the risk of iatrogenic complications. CASE REPORT: During an anatomical dissection we observed a very rare anatomical variation of the musculocutaneous nerve. Based on this discovery, we performed research in the literature with the aim of finding if this variation has been previously described. Firstly, we identified various classifications of anatomical variations of communicating branches between the musculocutaneous and median nerves, and then we observed that these variations corresponded to various rates of frequency. Our finding is a rare undescribed anatomical variant within the variants classified as Type II according to Le Minor, which is observed in 6.8-10.7% of cases. CONCLUSIONS: The peculiar position of anatomical variations and anastomosis has clinical and functional relevance. Healthcare professionals must be aware of these variations to minimize surgical complications, accurately diagnose neurovascular pathologies, and optimize patient management. Further research into the genetic and embryological underpinnings of these variations may provide additional insights into this intriguing aspect of human anatomy.

Creation of a replicable anatomic model of terrible triad of the elbow.

BACKGROUND: Terrible triad of the elbow (TTE) is a complex dislocation associating radial head (RH) and coronoid process (CP) fractures. There is at present no reproducible anatomic model for TTE, and pathophysiology is unclear. The main aim of the present study was to create and validate an anatomic model of TTE. Secondary objectives were to assess breaking forces and relative forearm rotation with respect to the humerus before dislocation. METHODS: An experimental comparative study was conducted on 5 fresh human specimens aged 87.4 ± 8.6 years, testing 10 upper limbs. After dissection conserving the medial and lateral ligaments, interosseous membrane and joint capsule, elbows were reproducibly positioned in maximal pronation and 15° flexion, for axial compression on a rapid (100 mm/min) or slow (10 mm/min) protocol, applied by randomization between the two elbows of a given cadaver, measuring breaking forces and relative forearm rotation with respect to the humerus before dislocation. RESULTS: The rapid protocol reproduced 4 posterolateral and 1 divergent anteroposterior TTE, and the slow protocol 5 posterolateral TTE. Mean breaking forces were 3,126 ± 1,066 N for the lateral collateral ligament (LCL), 3,026 ± 1,308 N for the RH and 2,613 ± 1,120 N for the CP. Comparing mean breaking forces for all injured structures in a given elbow on the rapid protocol found a p-value of 0.033. Comparison of difference in breaking forces in the three structures (LCL, RH and CP) between the slow and rapid protocols found a mean difference of -4%. Mean relative forearm rotation with respect to the humerus before dislocation was 1.6 ± 1.2° in external rotation. CONCLUSIONS: We create and validate an anatomic model of TTE by exerting axial compression on an elbow in 15° flexion and maximal pronation at speeds of 100 and 10 mm/min.

Triphallia: the first cadaveric description of internal penile triplication: a case report.

INTRODUCTION: Triphallia, a rare congenital anomaly describing the presence of three distinct penile shafts, has been reported only once in the literature. This case report, based on an extensive literature review, describes the serendipitous discovery during cadaveric dissection of the second reported human case of triphallia, distinctly morphologically different from the previous case. CASE PRESENTATION: Despite the normal appearance of external genitalia on examination, the dissection of a 78-year-old white male revealed a remarkable anatomical variation: two small supernumerary penises stacked in a sagittal orientation posteroinferiorly to the primary penis. Each penile shaft displayed its own corpora cavernosa and glans penis. The primary penis and largest and most superficial of the supernumerary penises shared a single urethra, which coursed through the secondary penis prior to its passage through the primary penis. A urethra-like structure was absent from the smallest supernumerary penis. CONCLUSION: This case report provides a comprehensive description of the anatomical features of triphallia in a cadaver, shedding light on the morphology, embryology, and clinical implications of this anomaly. Without dissection, this anatomical variation would have remained undiscovered, suggesting the prevalence of polyphallia may be greater than expected. The single tortuous urethra present in this case, as well as the supernumerary and blind ending urethras present in many cases of penile duplication, may pose significant risk of infection, sexual dysfunction, subfertility, and traumatic catheterization. SIGNIFICANCE: These findings underscore the importance of meticulous anatomical dissections and may act as a resource for anatomists and those studying genitourinary anomalies. Although we can only speculate as to which functional implications this patient may have experienced, understanding such anatomical variations contributes to both knowledge of human anatomy and clinical management should the condition be encountered in living individuals.

Enhanced stability of the distal radioulnar joint with double suture button construct: a cadaveric study.

BACKGROUND: Distal radioulnar joint (DRUJ) instability is a common post-traumatic complication, often leading to chronic pain and dysfunction. Current reconstructive techniques, such as the single suture button construct, offer suboptimal stabilization in certain motions. This study aimed to evaluate whether a double suture button construct provides greater stability than the single construct in a cadaver model of DRUJ instability. We hypothesized that the double suture button construct would more effectively minimize dorsal translation of the radius relative to the ulna. METHODS: We used nine freshly frozen human cadaver upper extremities, destabilized the DRUJ, and then reconstructed the joint using three different suture button constructs: single transverse, double (transverse + oblique), and single oblique. The specimens were secured in a custom-designed testing apparatus to measure dorsal translation of the radius. The study proceeded in five stages: stable DRUJ, unstable DRUJ, and reconstruction using a single transverse, double (transverse + oblique), and single oblique suture button construct. Dorsal translation was measured at neutral, 45° pronation, and 45° supination. Statistical comparisons of mean values were conducted for each stage. RESULTS: Reconstruction with the transverse, transverse plus oblique, and oblique suture button constructs resulted in statistically significant reductions in dorsal translation compared to the unstable DRUJ (p < 0.001 for all). The double-suture button construct significantly minimized dorsal translation in all positions, restoring stability comparable to a stable DRUJ: neutral (p = 1.000), pronation (p = 0.963), and supination (p = 1.000). In contrast, single constructs failed to fully restore stability in pronation and supination. CONCLUSION: The double suture button construct provides significantly greater stabilization of the DRUJ compared to the single construct. These findings suggest that the double construct could be a more effective option for treating DRUJ instability, particularly in restoring normal joint function during various motions. Further research is warranted to confirm these results in clinical settings.

The Status of Cadaver-Based Anatomy Instruction in Missouri Medical Schools.

Cadaveric dissection has been a foundational principle of medical anatomic education for the last 400 years, yet medical anatomy course hours have been drastically reduced in the last decades. With this course reduction and the availability of other modalities for anatomic instruction, the physician may question the current role of cadavers in medical anatomy courses. This study aims to evaluate the role cadaveric dissection plays in anatomy programs in allopathic and osteopathic medical schools in Missouri and compare course hours to the national trend. Ongoing challenges are reviewed, including the international shortage of qualified cadaveric anatomists.

A novel supraorbital surgical approach for enucleation in dromedary camels (Camelus dromedaries): cadaveric study.

BACKGROUND: Enucleation and exenteration are widely utilized ophthalmic procedures in veterinary practice, involving the complete removal of the eye and comprehensive extraction of orbital contents, respectively. These procedures are indicated for pain relief, excision, and management of neoplasia metastases, and addressing severe medically untreatable conditions. AIM: This study aimed to develop an orbital enucleation surgical approach. The study evaluated the applicability of the new approach and investigated the impact of the surgical procedure. METHODS: Anatomical dissection of three cadaveric heads and surgical orbital enucleation in four cadaveric heads were performed. Anatomical data was collected, and feasibility, safety and applicability of the procedure were assessed. RESULTS: Anatomical dissection showed a distinctive large orbital fossa, providing a suitable surgical window to access orbital structures. The procedure was found to be feasible, facilitating the complete removal of the orbital content. Notably, the preservation of intact eyelids was prioritized to enhance cosmetic appearance. CONCLUSION: The presented orbital enucleation technique proved to be feasible, safe, reproducible, and required basic surgical skills to perform.

Ultrasound-guided trigeminal nerve approach at the level of the pterygopalatine fossa in cat cadavers.

OBJECTIVE: To describe an ultrasound-guided suprazygomatic approach to the trigeminal nerve block in cat cadavers. STUDY DESIGN: Prospective descriptive study. ANIMALS: Ten feline cadaver heads. METHODS: A 25:75 methylene blue-iopamidol mixture (0.1 mL cm-1 cranium length) was injected into 10 cadaver heads using an ultrasound-guided suprazygomatic approach. A computed tomography (CT) scan was performed to identify contrast presence at the orbital fissure, foramen rotundum and ovale, followed by anatomical dissection to identify staining of the pterygopalatine fossa (PPF), extraconal retrobulbar area, mandibular and maxillary nerves. Descriptive statistics were used to summarize results. RESULTS: A total of 20 injections were performed. Of these, 1/20 misinjection occurred and excluded from further reporting. The volume of injectate was 0.9 (0.9-1.1) mL [median (range)]. Staining of the PPF, extraconal space, maxillary and mandibular nerves over more than 6 mm was achieved in 19/19 (100%), 18/19 (95%), 17/19 (89%) and 19/19 (100%) of injections, respectively. CT showed presence of contrast within 5 mm of the orbital fissure, foramen rotundum and ovale in 18/19 (95%), 19/19 (100%) and 19/19 (100%) of the injections, respectively. No intracranial migration was observed. CONCLUSIONS AND CLINICAL RELEVANCE: This cadaver study illustrates that the suprazygomatic ultrasound-guided trigeminal nerve injection technique can successfully stain the PPF, retrobulbar cone extraconally, mandibular and maxillary nerves. Consequently, this technique has the potential to be used in vivo in cats to desensitize areas innervated by the trigeminal nerve.

Recommended recumbency to avoid insertional complications during small-bore wire-guided thoracostomy tube placement in cats-a cadaver study.

BACKGROUND: Small-bore wire-guided thoracostomy tubes (SBWGTT) are commonly used in cats to manage pleural disease and generally have a low complication rate. Our study aimed to explore the correlation between recumbency of cats, placement method, and the occurrence of insertional complications to identify risk factors during SBWGTT placement. In this experimental cadaveric study, SBWGTT placement using a modified Seldinger technique was conducted in 24 feline cadavers. Cats, euthanized for reasons unrelated to the study, were randomly assigned to pleural effusion (EFF; n = 12) and pneumothorax (PNEU; n = 12) groups. Each cadaver was intubated and ventilated with a peak inspiratory pressure (PIP) of 10 mmHg, and sterile saline or air was instilled into the thorax over a 5 mm thoracoscopic trocar in the fourth intercostal space (ICS). Instillation was stopped when the lateral thoracic wall to lung distance (TWLD) reached 10 to 12 mm, measured with ultrasound in the favorable position. Sternal recumbency was the favorable position for the EFF group, and lateral recumbency for the PNEU group. Following the placement of the first SBWGTT in each group, the cadavers were positioned unfavorably (lateral recumbency for EFF group, sternal recumbency for PNEU group), and a second drain was introduced contralaterally. A bilateral 8th ICS thoracotomy was then performed to visually assess intrathoracic structures and drain integrity. A binary logistic regression mixed model was conducted to determine interaction between the induced condition and body position. RESULTS: A total of 48 SBWGTTs were placed, with complications observed in 33.3% (8/24) of cases. Five of these were major complications consisting of lung lacerations. Complications were more common in the unfavorable position, accounting for 75% of cases, although this result was not statistically significant. The odds of complication rates were > 70% in the unfavorable position and decreased with an increase in TWLD (< 30%). CONCLUSION: Complications associated with SBWGTT placement are influenced by recumbency, although the data did not reach statistical significance. Placing cats in lateral recumbency for pneumothorax treatment and sternal recumbency for pleural effusion treatment may reduce insertional complications.

Zigzag tenotomy of the extensor hallucis longus through minimally invasive surgery in cadaveric specimens: description of a new technique.

BACKGROUND: Lengthening of the extensor hallucis longus (EHL) is performed to address various forefoot pathologies. The retraction of this tendon is strongly associated with the Hallux Abductus Valgus (HAV) deformity. Minimally Invasive Surgery (MIS) lengthening of the EHL is carried out in combination with other surgical techniques for HAV bone realignment. It is performed without ischemia, using local anesthesia and sedation if required by the patient. One of the advantages of this technique is immediate ambulation with a postoperative shoe without the need for a cast. The objective of the research was to demonstrate the efficacy and safety of the minimally invasive technique for lengthening the tendon in patients with HAV. MATERIALS AND METHODS: The procedures were performed on 11 fresh cryopreserved cadaveric feet. HAV surgery was performed through dorsomedial and dorsolateral portals for Reverdin-Isham, Akin and adductor tenotomy. In addition, EHL tendon elongation was performed using the Beaver 67 MIS scalpel through an incomplete zigzag tenotomy. The specimens used did not present any type of disease nor had they undergone previous surgeries that could affect the technique. First, the plantar flexion of the metatarsophalangeal joint was measured with a goniometer to establish the degrees of this joint before proceeding with the technique, the tenotomy was performed and remeasured and finally the osteotomy was performed. In addition, an anatomical dissection of cadaveric specimens was performed and various anatomical and surgical relationships were analyzed and measured. RESULTS: The data indicate that, after performing zigzag tenotomy, there is an average improvement of 13.91 degrees in plantar flexion. CONCLUSIONS: The study confirms the effectiveness and safety of elongating the extensor hallucis longus tendon of the hallux using minimally invasive surgery. The zigzag technique for tendon elongation may be considered a viable minimally invasive treatment option for addressing tendon hyperextension in patients with HAV.

Versatility in the use of cadaveric skin grafts for wound management.

BACKGROUND: Cadaveric skin grafts were initially used for the management of acute burn wounds. The biological coverage of the wound improves the quality of the wound bed, which prepares it to receive an autologous skin graft. The benefits of cadaveric skin graft in burn wounds have led to its use in the management of acute and chronic wounds of diverse etiologies. OBJECTIVE: To evaluate the use of cadaveric skin graft and subsequent autologous split-thickness skin graft (STSG) in the management of wounds of diverse etiologies at a single institution. MATERIALS AND METHODS: A retrospective analysis was performed of patients with wounds of different etiologies managed with cadaveric skin grafts followed by a second procedure in which autologous STSG was performed from May 2017 through May 2022 in the Plastic and Reconstructive Surgery Department of German Hospital, Buenos Aires, Argentina. RESULTS: A total of 25 patients with wounds of different etiologies were included. The mean affected body surface area (BSA) was 1.87%. The mean engraftment percentage of the cadaveric skin graft was 96.6%. The mean engraftment percentage of the STSG was 90.6%. All patients demonstrated improvement in local edema and inflammation, reduced secretions, and reduced pain after treatment. Two patients (8%) had complications, with 1 case of delayed healing of the donor site and 1 case of hypertrophic scarring. CONCLUSIONS: Cadaveric skin graft with subsequent STSG is a simple, safe, and effective alternative for the management of complex wounds of diverse etiologies. This technique is particularly useful in patients with multiple comorbidities who are at risk of recurrence and of developing multiple wounds during their lifetime.

Thyroidea Ima Artery in Cadavers of a Medical College in Nepal: A Descriptive Cross-sectional Study.

INTRODUCTION: Thyroidea ima artery is a variant arterial branch of arch of aorta supplying the thyroid gland. Understanding the anatomic variances and correctly identifying the thyroidea ima artery is crucial to preventing serious complications both before and after neck surgery. The aim of this study was to find out the prevalence of thyroidea ima artery in cadavers of a medical college in Nepal. METHODS: A descriptive cross-sectional study was carried out at the department of anatomy in Janaki Medical College, Dhanusha, Nepal from 27 December 2022 to 30 June 2023 after ethical clearence from the same institution. Origin of thyroidea ima artery was observed, recorded and photographed. Convenience sampling method was used. Data was analyzed using Microsoft Excel. RESULTS: Out of 35 cadavers, thyroidea ima artery was present in 2 (5.71%), arising from brachiocephalic trunk just proximal to its bifurcation and there was absence of inferior thyroid artery. CONCLUSIONS: Findings from our study showed that thyroidea ima artery originated from brachiocephalic trunk with absence of inferior thyroid artery.

Anatomical research and clinical application of multistage advancement in dorsal finger V-Y flap.

OBJECTIVE: To investigate the anatomical basis and clinical efficiency of the advancement distance in dorsal digital V-Y advancement flap. MATERIALS AND METHODS: Thirty-four fingers in 11 fresh adult hand specimen were selected, V-Y flap was performed with the digital artery as vascular pedicle, and the advancement distance was measured. The relationship between the distance and extensibility of skin, sliding degree of subcutaneous superficial fascia, angular displacement of digital arterial dorsal branch, elasticity of digital artery was discussed. Two cases were provided to demonstrate the feasibility and importance of this flap. RESULTS: In the dorsal digital V-Y advancement flap simulated on fresh adult hand specimens, the mean advance distance of the middle segment flap and proximal segment flap is 18 ± 0.8 mm and 34 ± 1.7 mm, respectively, and the maximum can reach 24 and 45 mm, respectively. Two cases of dorsal digital V-Y advancement flaps were designed and performed in the dorsal side of the ring finger middle segment and the thumb proximal segment, respectively. The advancement distances were 25 and 26 mm, respectively. All flaps survived completely and the incisions healed by first intention. The flap texture was good, the affected finger was symmetrical, and the activity and sensation restored well. CONCLUSION: The dorsal digital V-Y advancement flap with the digital artery as the main vascular pedicle can exert four factors for advancement effect, and significantly increase the advancement distance. The operation is simple, the blood supply is reliable, and the postoperative sensation is normal. It is an ideal flap for repairing the digital dorsal defect.

Precision of Cup Positioning Using a Novel Computed Tomography Based Navigation System in Total Hip Arthroplasty.

Background and Objectives: Navigation systems are designed to enhance surgical precision, improving patient outcomes and reducing the risk of implant misplacement. In this study, we have evaluated a novel orthopedic surgical platform that utilizes CT imaging with AI-based algorithms to automate several critical aspects of total hip arthroplasty. It contains three modules-preoperative planning, navigation during surgery, and follow-up analysis. The primary objective of the current study was to evaluate the precision of the navigation tool in cup placement, i.e., whether the information displayed for navigation correctly reflected the actual position of the implant. Materials and Methods: Surgery outcomes of 15 inter-rater measurements on human cadavers and 18 surgeries on patients who underwent total hip replacement using the navigation tool were analyzed. Results: In the inter-rater assessment, the mean errors were -0.31 ± 1.42° for anteversion, 1.06 ± 1.73° for inclination, and -0.94 ± 1.76 mm for cup position depth. In patients' surgeries, the mean errors were -0.07 ± 2.72° for anteversion, -0.2 ± 0.86° for inclination, and 0.28 ± 0.78 mm for cup depth. Conclusions: The navigation tool offers intra-operative guidance on notable precision in cup placement, thereby effectively mitigating the risk of cup malpositioning outside the patient-specific safe zone.

Surgical Precision of MICA and Reverdin-Isham Using 3D-Printed Guides: A Cadaveric Study.

Background/Objectives: Hallux valgus is a common foot deformity that requires surgical correction to restore proper alignment. Precision in the osteotomies performed during these surgeries is critical to avoid complications and improve outcomes. However, variability in surgeon experience can negatively affect precision. In this context, advances in 3D printing have enabled the development of customized surgical guides, which may enhance precision and reduce variability among surgeons with different levels of expertise. This study aims to evaluate the effectiveness of a 3D-printed surgical guide in minimally invasive hallux valgus correction, focusing on the accuracy of osteotomies performed by novice surgeons, experienced surgeons, and theoretically trained consultants. Methods: An ex vivo study was performed with 30 cadaveric feet, divided into three groups according to the level of experience of the surgeons: 3D guide group, Master's students, professionals. All surgeons performed Akin and Reverdin-Isham osteotomies, but the experimental group (the 3D guide group) utilized a customized 3D-printed surgical guide for enhanced precision during these procedures. Radiographic measurements of osteotomy angles and alignment were taken after the interventions, and compared with the planned values. Statistical analyses were conducted to evaluate the variability in the precision of the cuts. Results: The use of the 3D-printed surgical guide significantly reduced angular variability in the experienced group, achieving higher levels of accuracy than experienced surgeons. Effect sizes, which ranged from small to large, indicated a greater impact on angle measurements (η2 = 0.46, p < 0.001); no significant differences were found between the groups in other evaluated parameters. Conclusions: The incorporation of 3D-printed surgical guides in hallux valgus surgery significantly improves osteotomy accuracy, particularly in less experienced surgeons. This suggests that these guides can help standardize procedures, reduce the learning curve, and lower intraoperative complications.

A biomechanical investigation comparing a novel bone cement bridging screw system with conventional treatment methods for Kummell's disease.

Based on the characteristics of Kummell's disease (KD) and related anatomical structures of the thoracolumbar spine, a novel bone cement screw system has been designed to effectively avoid the cement loosening and displacement. This experiment aimed to assess the biological effects of the novel bone cement screw system in KD on fresh cadaveric thoracolumbar spine specimens, thereby discussing its potential application value and providing a foundation for clinical implementation. This study employed a total of 50 fresh female adult cadaver specimens. Each specimen underwent extraction of the T12 to L2 segment followed by the creation of an artificial KD model at the L1 segment and subsequent establishment of five distinct types of bone cement repair models. Model A represents the percutaneous vertebroplasty (PVP) model, Model B combines PVP with unilateral percutaneous pediculoplasty (PPP), Model C combines PVP with bilateral PPP, Model D introduces the novel bone cement screw combined with unilateral PVP, and Model E combines the novel screw with bilateral PVP, each group consists of 10 specimens. Subsequently, the six-axis spine robot was employed to execute cement three-dimensional biomechanical strength tests in six directions, including anterior flexion and posterior extension, left and right lateral bending, as well as left and right rotation. The novel bone cement screw, whether used unilaterally or bilaterally in combination with the PVP model, exhibits significantly reduced bone cement mobility and superior biomechanical stability during anterior flexion, posterior extension, left lateral bending, and right lateral bending (P<0.05).No significant differences were observed among the five models under both left and right rotation (P > 0.05).When comparing the novel bone cement screw combined with PVP unilaterally and bilaterally, no statistically significant difference was observed in the stability of bone cement across all six directions of motion (P>0.05). To conclude, this novel bone cement bridging screw system exhibits superior biomechanical stability compared to commonly used treatments. Furthermore, both unilateral and bilateral implementations of the novel bone cement screw system yield without significant differences observed. These findings present a reliable and innovative approach for clinical management of KD.

Gross Anatomy of the Equine Masseter Muscle: Lamination and Intramuscular Course of the N. Massetericus.

The masticatory muscles of the horse are arranged in an asymmetrical pattern. Four individual muscles on the medial side of the mandible are opposed by one muscle (M. masseter) on the lateral side. However, recent studies on various herbivorous mammals indicate that the masseter muscle features a complex stratigraphic structure that might account for a functional diversity resembling an arrangement of several individual muscles. The functional consideration of the multidirectional equine masticatory movements leads to a similar hypothesis. In order to elucidate the detailed anatomy of the equine masseter muscle, eight cadaveric equine heads were dissected. Additional 29 skull specimens were assessed with regard to the masseteric attachment within the Fossa masseterica. A constant arrangement of nine individual muscular layers within the masseteric muscle was determined. The individual layers were clearly separated by tendon plates and their attachment areas at the masseteric fossa of the mandible were arranged in a constant pattern of bony ridges. With similar consistency, the main trunk of the masseteric nerve was found to run from dorsocaudal to ventrorostral: On that course, the nerve penetrated between the muscular layers from medial to lateral at constant positions. The findings of this study serve as a basis for further studies with the aim of developing biomechanical concepts of equine masticatory movement.

Circumferential exposure of the cavernous sinus and parasellar region through a combined open and endoscopic endonasal transcavernous approach, a morphometric study.

INTRODUCTION: Although recent trends currently favor the endoscopic endonasal transcavernous approach (EETA) over the pretemporal transcavernous approach (PTA) for certain cavernous sinus pathologies, dedicated assessment of the surgical exposure and maneuverability is wanting. Toward this aim, this morphometric study quantifies these variables within four cavernous sinus compartments by comparing the PTA, EETA, and a combined approach to achieve a circumferential dissection (EETA-PTA). MATERIAL: In five latex-injected specimens, exposure volumes of the EETA, PTA, and circumferential EETA-PTA approaches were quantified; the latter combined the most conservative options of both the endoscopic and open approaches. Two clinical cases illustrate the combined approach. RESULTS: EETA-PTA provided the largest volume of exposure (65.6% vs 35% PTA vs 44.6% EETA, P = 0.01) and eliminated the need to mobilize the ICA or cross cranial nerves. Although EETA and PTA approaches afforded comparable exposure volumes along the entire cavernous sinus (34.9 vs 44.6%), the EETA better exposed medial and inferior compartments (whereas the PTA exposed larger volumes in the lateral and superior compartments. The combined EETA-PTA yielded 66% of total cavernous sinus exposure volumes and eliminated the need to mobilize the ICA or cross cranial nerves. CONCLUSIONS: Our methodology aligns with strategies that use a modular concept to divide the skull base into compartments for maximal safe resection. Excluding soft tumors, the EETA is preferred for medial and inferior lesions and the PTA for superior and lateral lesions. A staged combined EETA-PTA may safely yield a 360-degree access for extensive multi-compartment lesions that span neurovascular structures within the cavernous sinus.

[Determination of duration of fresh water exposure on corpse's skin by dispersion value of its electrical conductivity]. / Opredelenie dlitel'nosti vozdeistviya presnoi vody na kozhnyi pokrov trupa po velichine dispersii ego elektroprovodnosti.

Forensic medical examination of the body of a dead person found in water gives the expert an additional task to determine the duration of his stay in the water. The answer to this question is of fundamental significance for the investigative authorities, since a dead person could have been submerged in the water to conceal the crime. OBJECTIVE: Objectification of experts' conclusions about the duration of corpse's stay in the water on indicators of dispersion of electrical conductivity of its skin. MATERIAL AND METHODS: Research aimed at objectifying the conclusions of experts about the duration of corpse's stay in the water on the indicators of dispersion of electrical conductivity of its skin was conducted using the experimental material from the corpses of 68 persons of different sex and age, who died for different reasons. RESULTS: Three temperature ranges (1-24, 25-30, 31-40 °C) have been identified on the basis of regression analysis and mathematical models, describing the dynamics of electrical conductivity dispersion coefficient change depending on the duration of corpse's skin contact with the water of specified temperatures, have been created. CONCLUSION: Formulas for calculating the period of interest for the researcher have been developed and the boundaries of confidence intervals for each temperature range have been determined, taking into account its diagnostic applicability. A computer program has been written to facilitate routine calculations on the proposed method in order to simplify the practical application of the suggested procedure.