The influence of connective tissue grafting on the reconstruction of a missing facial bone wall using immediate implant placement and simultaneous bone reconstruction: a retrospective long-term cohort study.

PURPOSE: This retrospective cohort study evaluates the influence of connective tissue grafts (CTG) on bone regeneration at implant sites with total loss of the buccal bone wall treated with flapless immediate implant placement (IIP) and reconstruction with autogenous bone chips (AB) within a follow-up of up to 13 years. METHODS: Sixty implants were inserted in 55 patients in sites with total loss of the buccal bone wall between 2008 and 2021. The implants were inserted and the buccal gaps were grafted by AB. A subgroup of 34 sites was grafted additionally with CTG using tunnel technique. Primary outcome was the vertical bone regeneration in height and thickness. Secondary outcome parameters were interproximal marginal bone level, recession, soft tissue esthetics (PES), width of keratinized mucosa (KMW) and probing depths (PPD). RESULTS: Mean follow-up period was 60.8 months. In 55 sites a complete vertical bone regeneration was documented. The mean buccal bone level increased by 10.6 mm significantly. The thickness of the buccal bone wall ranged between 1.7 and 1.9 mm, and was significantly thicker in sites without CTG. Interproximal marginal bone level was at implant shoulder level. The mean recession improved significantly by 1.2 mm. In sites with CTG, recessions and PES improved significantly more. CONCLUSIONS: Additional CTG in extraction sites with total buccal bone loss followed by IIP with simultaneous AB grafting led to improved PES and recession, but also to a thinner buccal bone wall compared to sites grafted just with AB.

The influence of immediate occlusal loading on micro/nano-structure of peri-implant jaw bone in rats.

PURPOSE: The objective of the present study was to ascertain the effect of immediate occlusal loading after implant placement on osseointegration and the micro/nanostructure of the surrounding bone. METHODS: After extraction of a rat maxillary right second molar, an implant was placed immediately with initial fixation (2 N< ). The implants were placed to avoid occlusal loading due to mastication, and in the loaded group, a superstructure was fabricated and subjected to occlusal loading. Bone morphometry, collagen fiber anisotropy, and biological apatite (BAp) crystallite alignment were quantitatively evaluated in both groups after extraction and fixation of the jaw bone at Days 7 and 21 after surgery. RESULTS: Osseointegration was observed in both groups. Bone morphometry showed significant differences in bone volume, trabecular number, trabecular thickness and bone mineral density (BMD) at Days 21 postoperatively (P < 0.05). A significant difference was also found in the trabecular separation at Days 7 postoperatively (P < 0.05). In the evaluation of collagen fiber anisotropy, collagen fiber bundles running differently from the existing bone were observed in both groups. In terms of BAp crystallite alignment, a specific structure was observed in the reconstructed new bone after implantation, and preferential orientation of BAp crystallite alignment was observed in the longitudinal direction of the implants in the Day 21 postoperative loaded group. CONCLUSION: When sufficient initial fixation is achieved at the time of dental implant placement, then the applied masticatory load may contribute to rapidly achieving not only bone volume, but also adequate bone quality after implant placement.

Immediate implant placement in a dialysis patient. A case report.

Implant-supported rehabilitation in high-risk patients poses significant challenges for the dental team. The presence of comorbidities and increased infection risk can, for example, lead to a higher risk of implant loss. For the therapy to be completed with as few complications as possible, special anamnesis, detailed diagnostics, and a risk analysis based on those findings are indispensable. The aim of all considerations is to keep the risk of infection for the patient with a disease history to a minimum and to strive for an appropriate functional and esthetic therapeutic success. Particularly in the esthetic zone, in addition to the general health risks of the surgical procedure, esthetic aspects are increasingly taken into account in planning. The present article describes the implant-prosthetic replacement of a single anterior tooth in a dialysis patient. Several aspects (regular dialysis, missing buccal lamella, high smile line, functional risk) increased the risk of complications in this case.

The influence of immediate intraoperative loading with a splinting component on supporting tissues during a one-stage implant.

OBJECTIVE: Aim: To study the specifics of the impact of immediate intraoperative loading with a splinting component on supporting tissues during a one-stage implantation protocol. PATIENTS AND METHODS: Materials and Methods: In the course of the study, orthopedic treatment was carried out for 55 patients aged 29 to 60 years. The following were performed: cone-beam computed tomography, software planning and intraoral scanning with an optical scanner, one-stage implantation protocol, assessment of implant stability with the Osstell ISQ device, microcirculation study in the peri-implant area using laser Doppler flowmetry (LDF). RESULTS: Results: It was established that around loaded implants there is an increase in blood flow and vasomotor activity of the microcirculatory channel of the supporting tissues, an increase in the volume of bone tissue and an increase in torque, which is the optimal forecast for the acceleration of the pace of osseointegration. CONCLUSION: Conclusions: The use of a splinting component during immediate intraoperative functional masticatory load accelerates the dynamics of bone tissue remodeling processes around the implant, which is an optimal prediction of osseointegration rates in various dental implantation protocols and is consistent with high values of the implant stability coefficient.

Immediate Loading Using the Digitalized Customized Restoration of Single-tooth Implants Placed in Fresh Extraction Sockets in the Aesthetic Anterior Maxilla: A 10-Year Prospective Study of Marginal Bone Level.

AIM: The objective of this study was to assess marginal bone level around single implants inserted in fresh extraction sockets in the anterior maxillary region and instantly restored with computer-aided design/computer-aided manufacturing customized temporary crowns cemented on the final abutment. MATERIALS AND METHODS: A total of 20 patients (15 females and 5 males, with a mean age of 30 years), where 20 were placed in fresh extraction sockets. After raising a full-thickness flap, atraumatic extraction was performed the implant site was prepared and fixtures were stabilized on the palatal bone wall. The implant location was immediately transmitted to the prepared master model using the pick-up impression coping seated in the surgical guide template. Prefabricated abutments were used as the final abutment on the master model, scanned and the crown was planned using computer-aided manufacturing customized software. Later on 8th weeks, abutments were torqued as per the manufacturer's recommendation, and the final crowns were cemented. Using personalized intraoral radiographs marginal bone level was evaluated mesially and distally to the implant shoulder as a reference at implant placement, 8 weeks, 1, 3, 5, and 10 years after loading. RESULTS: Wholly implants were osteo-integrated positively after 10 years of practical loading, but only 18 were available for clinical and radiological follow-up, and 2 patients with two implants were excluded from the study due to relocation abroad without any implant failure. The average marginal bone loss (MBL) in the current report was 0.16 ± 0.167 mm at crown cementation, 0.275 ± 0.171 mm after 1 year, 0.265 ± 0.171 mm after 3 years, 0.213 ± 0.185 mm after 5 years, and 0.217 ± 0.194 mm at 10 years. CONCLUSION: The strategy of inserting and not removing the final abutment at the time of implant placement facilitates the establishment of adequate attachment of both soft and hard tissues to the abutment surface, ensuring uninterrupted organization of tissue architecture and offers advantages in helping maintain soft tissue maturation and preventing marginal bone level. CLINICAL SIGNIFICANCE: Immediately loaded implants in freshly extracted sockets lead to a significant reduction in marginal ridge resorption. The use of a temporary crown on a prefabricated abutment, exclusive of successive abutment manipulation, proved effective in preserving the primarily founding blood clot and served as a prototype for shaping the soft tissue around the previously wounded gum. How to cite this article: Berberi A, El Zoghbi A, Aad G, et al. Immediate Loading Using the Digitalized Customized Restoration of Single-tooth Implants Placed in Fresh Extraction Sockets in the Aesthetic Anterior Maxilla: A 10-Year Prospective Study of Marginal Bone Level. J Contemp Dent Pract 2024;25(3):213-220.

Influencing factors and evaluation methods for early stability of immediate implant. / å³åˆ»ç§æ¤æ—©æœŸç¨³å®šæ€§çš„å½±å“å› ç´ åŠè¯„ä»·æ–¹æ³•.

At present, implant restoration has become a hot research topic in the field of prosthodontics. The in-depth studies of new materials and new technologies enable immediate implantation, immediate and early loading to be realized, which meets the needs of patients for shortening the course of implant restoration and obtaining better aesthetic effects. However, compared with the traditional delayed implantation technology, it is equally challenging for clinicians how to achieve and even improve the initial and long-term stability of implants in order to raise the success rate of implant restoration. The initial stability of the implant is influenced by a combination of factors, including the implant, the patient's condition, and the surgical procedure. Recently, there have been a lot of studies on the influencing factors and common research methods for immediate implant stability and bone healing. Summarizing and analyzing them can provide reference for preoperative evaluation, surgical plan and loading timing of immediate implant restoration in the later stage.

Accuracy of flapless surgery using an autonomous robotic system in full-arch immediate implant restoration: A case series.

OBJECTIVES: This observational study aimed to evaluate the accuracy of robotic computer-assisted implant surgery (r-CAIS) for full-arch immediate restoration and to analyse possible factors contributing to deviations. METHODS: Three edentulous patients (five arches) underwent r-CAIS. Osteotomies were performed using an autonomous robot under the surgeon's supervision, and implant placement was performed in a freehand or robotic manner. Prefabricated provisional prostheses were delivered immediately after surgery. Postoperative cone beam computed tomography scans were performed to assess the deviations between the planned and placed implants. Statistics were compared with deviations of s-CAIS outlined in a meta-analysis. RESULTS: A sum of 28 implants were used. The mean global coronal and apical deviations measured 0.91 ± 0.43 mm and 1.01 ± 0.45 mm, respectively, and the mean angular deviation measured 1.21 ± 1.24 º. The r-CAIS showed significantly better precision than the s-CAIS in full-arch cases (P < 0.001). The implants inserted using the robotic arm exhibited fewer deviations than those placed in the freehand manner. Eighty percent of prefabricated provisional prostheses were successfully delivered. CONCLUSIONS: Within the limitations of the present study, our data suggest that autonomous r-CAIS is a feasible approach for simultaneous immediate restoration in edentulous patients, showing better accuracy than s-CAIS. Further large-scale studies are necessary to verify the advantages and disadvantages of this novel technique and to explore possible factors that influence its accuracy. CLINICAL SIGNIFICANCE: Autonomous r-CAIS can provide clinically acceptable implant placement accuracy in edentulous patients, significantly surpassing s-CAIS. This level of accuracy may represent a viable therapeutic approach for simultaneous immediate full-arch restoration.

A 1-Year Parallel-Group Randomized Clinical Trial Comparing the Effectiveness of a Mandibular Complete Denture vs an Early Loaded Single-Implant Overdenture.

PURPOSE: To assess the effectiveness of converting a conventional mandibular denture (CMD) into a single-implant mandibular overdenture (SIMO). MATERIALS AND METHODS: Edentulous patients received a new CMD and were randomly assigned to the CMD or SIMO group. For SIMO patients, a midline early-loaded implant was inserted and incorporated into the CMD after 3 weeks. Patient satisfaction and oral health-related quality of life were assessed at baseline and up to 1 year. Regression models were constructed using Generalized Estimating Equation (GEE). RESULTS: After 12 months, 32 patients were assessed (CMD: n = 17; SIMO: n = 15). Significant improvement was observed for the SIMO group compared to baseline measures. CONCLUSIONS: SIMO may be considered an effective alternative for patients unsatisfied with their CMDs.

A Modified Socket-Shield Technique: Simplifying the Root Sectioning Process.

Socket wall resorption leading to a loss of surrounding bone following tooth extraction has been documented in the dental literature. The use of various socket-shield techniques has been suggested as a solution to this issue. In these approaches, the tooth root is sectioned in two, and the coronal two-thirds of the buccal root is preserved in the socket. This allows the periodontium along with the bundle and buccal bone to remain intact, thus preventing or minimizing bone remodeling. According to the literature, this procedure is highly technique sensitive, especially when it comes to sectioning the root. Additionally, the procedure requires significant time, and several complications may occur, such as fenestration or luxation of the remaining root, requiring its complete extraction. This case report presents a modified socket-shield technique using a trephine bur guided by a computer-designed surgical guide to simplify root sectioning, thus reducing surgical time while increasing predictability of the outcome.

Immediate implant placement with immediate or delayed provisionalization in the maxillary aesthetic zone: A 10-year randomized trial.

AIM: To compare the marginal bone level of immediately placed implants, with either immediate or delayed provisionalization (IP or DP), in the maxillary aesthetic zone after 10 years of function. MATERIALS AND METHODS: Participants with a failing tooth in the maxillary aesthetic zone were randomly assigned to immediate implant placement with either IP (n = 20) or DP (n = 20) after primary wound closure with a free gingival graft. The final restoration was placed 3 months after provisionalization. The primary outcome was change in marginal bone level. In addition, implant survival, restoration survival and success, peri-implant tissue health, mucosa levels, aesthetic indices, buccal bone thickness and patient satisfaction were evaluated. RESULTS: After 10 years, the mean mesial and distal changes in marginal bone level were -0.47 ± 0.45 mm and -0.49 ± 0.52 mm in the IP group and -0.58 ± 0.76 mm and -0.41 ± 0.72 mm in the DP group (p = .61; p = .71). The survival rate was 100% for the implants; for the restorations, it was 88.9% in the IP group and 87.5% in the DP group. Restoration success, according to modified USPHS criteria, was 77.8% in the IP group and 75.0% in the DP group. The prevalence of peri-implant mucositis was 38.9% and 35.7% and of peri-implantitis 0.0% and 6.3%, respectively, in the IP group and DP group (p = 1.0; p = .40). The Pink Esthetic Score and White Esthetic Score was 15.28 ± 2.32 in the IP group and 14.64 ± 2.74 in the DP group, both clinically acceptable (p = .48). The buccal bone thickness was lower in the DP group. Patient satisfaction was similar in both groups (p = .75). CONCLUSIONS: The mean marginal bone level changes after immediate implant placement with IP were similar to those after immediate placement with DP. CLINICAL TRIAL REGISTRATION: Registered in the National Trial Register (NL9340).

Immediate single-tooth replacement with acellular dermal matrix allogeneic bone and ossifying collagen scaffold: A case series.

The pursuit of predictable implant success in the aesthetic zone continues as technology develops. Creating stable marginal bone and an optimal peri-implant mucosal environment is the foundation for a long-term healthy and aesthetic implant treatment outcome. Tissue stability is dependent on multiple factors, including the regenerative materials used to create the peri-implant supporting tissues and maintain the tissue volume. The present study aims to describe a technique that combines a flapless approach to extract hopeless teeth in the aesthetic zone and implant insertion using an acellular dermal matrix placed to contain the coronal aspect of an innovative ossifying collagen scaffold designed to promote neoformation of vital native bone. This technique combines a minimally invasive approach with the application of a novel biomaterial that offers stable augmentation of the gingival thickness as well as bone fill in the facial gap, the space between the implant and the buccal plate, to ensure predictable aesthetic results. A collection of cases are presented to demonstrate the surgical technique and the situation over a follow-up period of 22 months. Pre- and post-treatment CBCT imaging were utilised to quantify the stability or changes noted in the alveolar bone, and pre-and post-treatment intraoral scanning were used for the same purpose in the peri-implant phenotype. This case series presents stable and aesthetic clinical outcomes evaluated through digital assessment.

Immediate loading of implants inserted through impacted teeth in the aesthetic area: A retrospective study with a mean follow-up period of 7 years.

PURPOSE: To evaluate the survival and success rate of and the incidence of complications affecting implants inserted and immediately loaded in sites where an impacted tooth was present in the maxilla. MATERIALS AND METHODS: A total of 10 patients were treated and 14 implants were inserted, 4 in healed sites and 10 in extraction sites. The implant site preparation started in the crestal bone and continued in the enamel and dentine of the impacted tooth. The radiographic depth of implant penetration into the impacted tooth, peri-implant soft tissue and hard tissue condition at the 1-year follow-up and the last follow-up appointment, marginal bone loss at the 1-year follow-up and the last follow-up appointment, and the final aesthetic result were evaluated. RESULTS: The implants healed uneventfully with an adequate hard and soft tissue response and no adverse clinical or radiographic signs or symptoms. They were in function for a minimum of 3 and a maximum of 11 years (mean 7.2 years). CONCLUSION: Although further studies with a larger sample size are required to validate this unconventional approach, it can be considered a valuable clinical option to replace teeth in an area of impaction.

Tissue engineering innovations to enhance osseointegration in immediate dental implant loading: A narrative review.

The demand for efficient and accelerated osseointegration in dental implantology has led to the exploration of innovative tissue engineering strategies. Immediate implant loading reduces treatment duration and necessitates robust osseointegration to ensure long-term implant success. This review article discusses the current studies of tissue engineering innovations for enhancing osseointegration in immediate dental implant loading in the recent decade. Keywords "tissue engineering," "osseointegration," "immediate implant loading," and related terms were systematically searched. The review highlights the potential of bioactive materials and growth factor delivery systems in promoting osteogenic activity and accelerating bone regeneration. The in vivo experiment demonstrates significantly improved osseointegration in the experimental group compared to traditional immediate loading techniques, as evidenced by histological analyses and biomechanical assessments. It is possible to revolutionize the treatment outcomes and patient satisfaction in dental implants by integrating bioactive materials and growth factors.

Evaluation and assessment of the survival of tooth implant supported prosthesis in tooth and implant supported rehabilitation cases with metal frameworks.

INTRODUCTION: Over the years, implant therapy has been a commonly used treatment option for individuals who are partially or totally edentulous, with a long-term success rate of over 90%. With significant advancements in biomaterials and technology, implant dentistry can now conduct prosthetic rehabilitations in the majority of patients catering to all types of needs. However, in order to meet the demands of a patient base that is always growing, new trends in implantology are emerging in recent years that are focused on minimally invasive surgery and financial sustainability. In certain clinical scenarios, connecting teeth and implants to support fixed partial prosthesis (FPPs) may be a predictable and workable course of treatment. MATERIALS AND METHODS: 22 patients were selected for this study who had tooth and implant supported prosthesis placed as a final restoration. Out of these 22 patients; 12 were male and 10 were female patients. Implants were placed following proper protocol and if grafting procedures were required they were carried out. A second stage surgical procedure was carried out and delayed loading protocols were followed. The statistical analysis was done using the IBM SPSS 24.0, Chicago, USA. The survival of the implants and teeth were measured by the Kaplan Meier survival scale. Bone loss was assessed at baseline(upon loading), 12 months and 24 months. RESULTS: The implant survival rate was measured at 6 months, 12 months, 18 months and 24 months. At 24 months, one implant showed failure, so the survival rate of the implants were 95.4%. Bone loss of 1 mm was seen around one implant at 12 months. Bone loss of 1 and 2 mm was present around two implants and one implant respectively at 24 months. CONCLUSION: From the results of this study, we can conclude that tooth implant supported prosthesis show very good survival when used in rehabilitation cases.

Finite element analysis of stress distribution on residual root structure in socket shield procedure following immediate dental implant placement: an in vitro study.

BACKGROUND: The success of implants in the socket shield technique relies on stress experienced by root fragments within the socket. Although there is no consensus on optimal root fragment thickness, varying thicknesses and dynamic implant placement induce stress in various directions and degrees. This study aimed to assess biomechanical response and stress distribution across different root fragment thicknesses in the socket shield procedure. METHODS: This in vitro study was conducted to assess and compare the stress distribution on residual root structures of varying thicknesses positioned within the labial aspect of the maxillary incisor socket during immediate implant placement of standard dimensions. The procedure involved applying an insertional torque of 40 Ncm, and the analysis was conducted using finite element analysis software. RESULTS: Utilizing the Numerical Technique with Abaqus software for explicit dynamics, von Mises stress and principal strain were analyzed on the root structure and bone under nonlinear contact conditions during implant torque application. For Model A, a loading torque of 40 Ncm was applied vertically on the implant, along with a horizontal force of 20 N on the root structure and bone. Results indicated maximum stress of 12.68 MPa on the root structure with a thickness of 0.5 mm and 5.61 MPa on the bone, with principal strains of 6.82E-03 and 4.10E-03, respectively. In Model B, with a root structure thickness of 1.0 mm, the maximum stress increased to 19.70 MPa, while the bone stress rose to 9.51 MPa, with principal strains of 1.03E-02 and 6.09E-03. Model C, with a root structure thickness of 1.5 mm, exhibited a maximum stress of 21.58 MPa on the root and 10.12 MPa on the bone, with principal strains of 1.16E-02 and 6.10E-03. Lastly, in Model D, with a root structure thickness of 2.0 mm, the maximum stress on the root structure and bone escalated to 28.74 MPa and 11.38 MPa, respectively, with principal strains of 1.55E-02 and 8.31E-03. CONCLUSIONS: As the thickness of the shield increases (ranging from 0.5 to 2 mm) in socket shield procedures with immediate implant placement, both stress on the root fragment and bone and principal micro-strain escalate. However, employing a shield thickness within the range of 0.5 to 2 mm does not lead to any adverse stress generation on the residual root fragment. However, for enhanced safety, it is recommended to restrict the maximum diameter and extension of the root fragment to 1.5 mm when considering implant sizes and socket diameter for the socket shield technique.

Comparing Bone Alteration and Esthetic Recovery Between the Socket-Shield Technique and the Conventional Immediate Implant Technique: A Retrospective Study.

PURPOSE: To evaluate bone preservation and esthetic recovery between the socket-shield technique (SST) with different labial bone plate thicknesses and the conventional immediate implant technique (CIIT). MATERIALS AND METHODS: Patients who underwent immediate implant placement in the anterior region were divided into three groups: the SST with a thickwall phenotype (> 1 mm; SSTA group), the SST with a thin-wall phenotype (< 1 mm; SSTB group), and the CIIT with a thickwall phenotype (> 1 mm; CIIT group). Radiologic images and clinical photos were collected before surgery, immediately postoperatively, and 6 months postoperatively. The labial bone width, labial bone width change (BWC), labial bone volume change (BVC), pink esthetic score (PES), and complication rate were evaluated among the three groups. Statistical analysis was performed using SPSS software. RESULTS: A total of 60 patients (n = 20/group) were enrolled in this 6-month retrospective study. The BWC in the SSTA group (0.22 to 0.30 mm) and the SSTB group (0.18 to 0.33 mm) was less than that in the CIIT group (0.61 to 0.80 mm; P < .004). The SSTA group and the SSTB group had a lower BVC (24.08 vs 21.14 vs 54.81, respectively; P = .004) and greater PES (11.75 vs 11.65 vs 10.65, respectively; P = .009) than the CIIT group. No complications occurred among these patients. CONCLUSIONS: With the limitations of this study, it can be concluded that the SST is a reliable method for preserving bone and achieving satisfactory esthetic outcomes. The labial bone plate phenotype associated with the SST has minimal impact on both clinical and radiologic outcomes.

Flapless early implant placement into the uncalcified provisional matrix-Does it lead to osseointegration of the implant? A preclinical study.

AIM: To test whether early implant placement into the extraction socket containing an uncalcified provisional matrix leads to successful osseointegration and stable marginal bone levels. MATERIALS AND METHODS: In six mongrel dogs, the mandibular molars were extracted. Three weeks later, early implant placement was performed according to three experimental protocols: (i) flapless implant placement with preservation of the provisional matrix; (ii) flap elevation, socket debridement and implant placement; and (iii) flap elevation, socket debridement, implant placement and guided bone regeneration (GBR). One untreated extraction socket served as a control group. Data analyses were based on histologic slides 3 months after implant placement. RESULTS: There were no differences in bone-to-implant contact between the three experimental groups (66.97%, 58.89% and 60.89%, respectively) (inter-group comparison p = .42). Marginal bone levels, first bone-to-implant contact as well as the thickness of the connective tissue did not reveal any significant differences between the groups (p = .85, .60 and .65, respectively). CONCLUSIONS: Flapless early implant placement into posterior extraction sockets was as effective as an open flap approach in conjunction with GBR. Mineralization of the socket seems to occur irrespective of the presence of dental implants or biomaterials.

Comparison of accuracy of immediate implant placement between planned and actual position in pre-extractive versus conventional method - A prospective study.

This study aims to evaluate the accuracy of immediate implants in mandibular molars between the conventional method and the pre-extractive inter-radicular method. MATERIALS AND METHODS: A total of 20 patients were equally divided into two groups. Implants were placed using the conventional method (Group A) and pre-extractive inte-rradicular method (Group B). Coronal, apical and angular deviation between planned and placed implants were evaluated by superimposing preoperative and postoperative three-dimensional (3D) STL models in Geomagic Freeform software. The data were subjected to an unpaired Student t-test. RESULTS: Results revealed that the coronal, apical and angular deviation were lower in the pre-extractive inter-radicular drilling method than in the conventional method, which was statistically significant. Apical deviation was greater than coronal deviation in both the sagittal and coronal planes. It was also found that the mean deviation was greater in the sagittal plane (mesio-distal axis) than in the coronal plane (bucco-lingual axis). CONCLUSION: Comparison of the two methods revealed significant changes between the planned and actual positions of implant. When stringent steps were followed, the degree of deviation was found to be less in the pre-extractive inter-radicular approach, proving it to be more accurate than the conventional method. However, large-scale research studies are required to extrapolate our findings.

Hard and soft tissue alterations using dual-zone concept versus connective tissue graft at maxillary immediate implant placement: A 1-year randomized clinical and volumetric trial.

OBJECTIVES: To evaluate the esthetic outcome, as well as clinical, radiographic, and volumetric tissue alterations 1 year after immediate implant placement (IIP) with connective tissue grafting (CTG) versus dual-zone concept (DZ) at sites with thin labial bone in the esthetic zone. MATERIALS AND METHODS: This randomized clinical trial included 30 patients treated with IIP simultaneous with either CTG or DZ (n = 15 each). Pink esthetic score (PES) was assessed 6 months after crown placement as the primary outcome. Amount of bone labial to the implant, labio-palatal ridge reduction, and crestal bone changes were measured via CBCT after 1 year. Volumetric analysis of linear labial soft tissue contour, interdental, and mid-facial soft tissue level changes, and total volume loss (mm3) were measured after 1 year. RESULTS: Similar PES was observed in the CTG (12.53 ± 1.13) and DZ (12.13 ± 1.55) groups, with no significant difference (p = 0.42). Likewise, there were no statistically significant differences found between the two groups in labio-palatal bone reduction (mm&%), interdental papillae, and mid-facial gingival levels (p > 0.05). However, the mean vertical crestal bone changes in the CTG and DZ groups were -1.1 ± 0.6 mm and 0.2 ± 1.0 mm, respectively, with a statistically significant difference (p = 0.0002). Moreover, CTG revealed less linear and total volume (mm3) loss in the labial soft tissue which was statistically significant compared to DZ (p = 0.007). CONCLUSION: Both groups demonstrated the same PES, nevertheless, volumetric analysis revealed twice total labial volume loss in DZ compared to CTG. It might be concluded that the use of CTG with IIP caused less horizontal reduction in the supra-implant complex compared to the DZ.

Comprehensive analysis of the maxillary esthetic zone for immediate implant placement using cone beam computed tomography: A study of 352 maxillary images.

STATEMENT OF PROBLEM: Previous studies have examined the maxillary esthetic zone for immediate implant placement, but these studies had small sample sizes and did not investigate multiple parameters. PURPOSE: The purpose of this cross-sectional study was to use cone beam computed tomography (CBCT) to evaluate the sagittal root position (SRP), alveolar bone concavity, labial bone perforation (LBP), and tooth-ridge angle in the maxillary anterior teeth region. MATERIAL AND METHODS: A total of 352 CBCT images of patients (180 men and 172 women) who visited the dental hospital between 2018 and 2023 were analyzed. The sample included 2112 anterior maxillary teeth. SRP, alveolar bone concavity, tooth ridge angle, and LBP were assessed using virtual implant simulation. The data were analyzed by using chi-squared and kappa tests to analyze distributions and agreement, respectively, dependent and independent t-tests to assess sex and tooth-specific differences, and the Spearman correlation test to explore potential correlations (α<.05). RESULTS: The CBCT images revealed that the majority of SRP were in Class I (85.4%), with smaller percentages in Class II (12.5%) and Class IV (2.3%); Class III was the least common (1%). The canine exhibited the most significant alveolar bone concavity angle average (149.14 ±6.35 degrees), followed by the lateral incisor (142.32 ±8.7 degrees). The canines had the highest occurrence of LBP (63.1%) (P<.01). Women had a higher frequency of labial bone perforation and deeper alveolar bone concavities than men (P<.01). CONCLUSIONS: The findings of this study indicate that careful assessment and planning are necessary for immediate implant placement in the maxillary anterior region. The significant occurrence of LBP highlights the importance of thorough planning and evaluation to avoid surgical mishaps and complications which may necessitate bone grafting and result in added costs and time. Special attention should be given to women and the canine area.