Evaluation of dentin features in teeth after caries removal by three techniques (chemomechanical, mechanical with a smart bur, and air-abrasion): an in vitro study.

Background: Different methods for removing dental carious lesions exist, including conventional rotary caries removal and new advanced technology like polymer-based burs, chemomechanical agents, air abrasion, and laser. Objectives: This study shows the differences in features of dentin (smear layer, patency of dentinal tubules, surface irregularities, intertubular micro porosities, and exposed dentinal tubules) among different types of caries removal techniques. Materials and Methods: An in vitro study was done on 60 primary molars with occlusal class I active caries. Teeth were divided into three groups according to a method of caries removal (G1: chemomechanical, G2: mechanical with a smart bur, and G3: air-abrasion). After complete caries excavation, the teeth were examined under a scanning electronic microscope (SEM) with the power of magnification 4,000x and 8,000x to show the morphological dentinal features with SEM microphotographs. Data obtained was analyzed using the SPSS program where Fisher exact, Kruskal-Wallis and multiple Wilcoxon sum rank tests were used. The level of significance is when the p-value is less than 0.05. Results: Generally, SEM showed the highest ratio of score 1 of smear layer presence, surface irregularities, and microporosity in all groups in both magnifications. The patency of tubules showed the highest ratio of score 1 in G1, scores 2 in both G2 and G3 in magnification 4,000x, while 8,000x there was the highest ratio of its score 1 in G1 and G2 while the G3 has score 2 as the highest score. The exposed dentinal tubules showed the highest ratio in G1 in score 3, in G2 in score 2, and in G3 in score 1 in magnification 4,000x, while 8,000x there was the highest ratio of its score 2 in both G1 and G3 while the G3 has highest score 1. The study with magnification 4,000x showed a significant difference (S) among three groups in exposed dentinal tubules with a p-value (0.012), and there was S between chemomechanical and smart, chemomechanical and air-abrasions groups with a p-value (0.041, 0.001 subsequentially). Other dentin features showed non-significant differences (NS) among or between groups in both magnifications (4,000x, 8,000x). Conclusions: All groups were effective in removing caries and can successfully treat young, scared or stressed patients. All methods of caries removal produce clinically parametric changes in the residual dentin.

Assessing tooth wear progression in non-human primates: a longitudinal study using intraoral scanning technology.

Intraoral scanners are widely used in a clinical setting for orthodontic treatments and tooth restorations, and are also useful for assessing dental wear and pathology progression. In this study, we assess the utility of using an intraoral scanner and associated software for quantifying dental tissue loss in non-human primates. An upper and lower second molar for 31 captive hamadryas baboons (Papio hamadryas) were assessed for dental tissue loss progression, giving a total sample of 62 teeth. The animals are part of the Southwest National Primate Research Center and were all fed the same monkey-chow diet over their lifetimes. Two molds of each dentition were taken at either two- or three-year intervals, and the associated casts scanned using an intraoral scanner (Medit i700). Tissue loss was calculated in WearCompare by superimposition of the two scans followed by subtraction analysis. Four individuals had dental caries, and were assessed separately. The results demonstrate the reliability of these techniques in capturing tissue loss data, evidenced by the alignment consistency between scans, lack of erroneous tissue gain between scans, and uniformity of tissue loss patterns among individuals (e.g., functional cusps showing the highest degree of wear). The average loss per mm2 per year for all samples combined was 0.05 mm3 (0.04 mm3 for females and 0.08 mm3 for males). There was no significant difference in wear progression between upper and lower molars. Substantial variation in the amount of tissue loss among individuals was found, despite their uniform diet. These findings foster multiple avenues for future research, including the exploration of wear progression across dental crowns and arcades, correlation between different types of tissue loss (e.g., attrition, erosion, fractures, caries), interplay between tissue loss and microwear/topographic analysis, and the genetic underpinnings of tissue loss variation.

Diagnosis of dental caries based on attenuation coefficients analysis of optical coherence tomography images.

Quantitative analysis of optical attenuation based on optical coherence tomography images will offer an effective method to enhance diagnostic capabilities. In this paper, the optical attenuation in demineralized caries specimens was calculated to distinguish between normal teeth and carious teeth and further to differentiate the severity of caries, and thus come to the half-automated diagnosis of dental caries. Results show that the attenuation coefficient in carious regions is approximately 4.97 mm - 1 ± 0.206 , while that of normal teeth is about 3.69 mm - 1 ± 0.231 . Attenuation coefficient of carious regions is 35% higher than that of normal teeth. Moreover, five classes of caries were qualified and classified based on the optical attenuation coefficient. Compared with the healthy teeth, there is a noticeable disparity in the attenuation coefficients of carious teeth, both on the surface and at the dentinoenamel junction. This study provides a method for accurate caries diagnosis, particularly in detection of early lesions and subtle structural changes.

Mitochondrial homeostasis in odontoblast: Physiology, pathogenesis and targeting strategies.

Caries and pulpitis remain a major global disease burden and affect the quality of life of patients. Odontoblasts are key players in the progression of caries and pulpitis, not only secreting and mineralizing to form dentin, but also acting as a wall of defense to initiate immune defenses. Mitochondrion is an information processor for numerous cellular activities, and dysregulation of mitochondrion homeostasis not only affects cellular metabolism but also triggers a wide range of diseases. Elucidating mitochondrial homeostasis in odontoblasts can help deepen scholars' understanding of odontoblast-associated diseases. Articles on mitochondrial homeostasis in odontoblasts were evaluated for information pertinent to include in this narrative review. This narrative review focused on understanding the complex interplay between mitochondrial homeostasis in odontoblasts under physiological and pathological conditions. Furthermore, mitochondria-centered therapeutic strategies (including mitochondrial base editing, targeting platforms, and mitochondrial transplantation) were emphasized by resolving key genes that regulate mitochondrial function. Mitochondria are involved in odontoblast differentiation and function, and act as mitochondrial danger-associated molecular patterns (mtDAMPs) to mediate odontoblast pathological progression. Novel mitochondria-centered therapeutic strategies are particularly attractive as emerging therapeutic approaches for the maintenance of mitochondrial homeostasis. It is expected to probe key events of odontoblast differentiation and advance the clinical resolution of dentin formation and mineralization disorders and odontoblast-related diseases.

A case of early childhood caries from a Medieval site in Southern Portugal: a multidisciplinary approach.

Dental caries is the most prevalent chronic infectious disease during childhood both in historical and contemporary times, but research focused on the oral health of non-adults from the past is still scant. As such, this study proposes a multidisciplinary approach to the differential diagnosis of severe dental lesions in a medieval non-adult skeleton. The skeleton of a three-year-old child recovered in the medieval necropolis of Cacela Velha (Portugal) was studied through macroscopic, radiological, elemental and stable isotope analyses. This individual exhibited enamel destruction and dentine exposure in both the maxillary and mandibular teeth, with the latter also showing changes in coloration. Elemental analysis showed that his skull presented lower values of Si, Cl, and Ca and higher of Cu compared to the control, while the concentration of P and S were significantly lower in the teeth. Early childhood caries is the most probable diagnosis for the dental lesions observed, apparently stemming from a reticulate of factors that include potential malnutrition, and the consumption of sugars in complementary feeding - even though historical sources point to the scarcity of sugar in Portugal during most of the Middle Ages.

Clinical, Radiographic, and Histological Changes in Enamel and Dentin, According to Caries Care International™ Evaluation, In Permanent Posterior Teeth: An Observational Study / Cambios Clínicos, Radiográficos e Histológicos en Esmalte y Dentina, Según Evaluación de Caries Care International™, en Dientes Posteriores Permanentes: Un Estudio Observacional

SUMMARY: CariesCare International ™ practical guide is a tool for the comprehensive assessment and treatment of caries that synthesizes clinical and radiographic diagnosis and risk factors, classifying the severity, progression, and activity of lesions. The objective of this study was to analyze the validity and prediction characteristics of the proposed dental caries classification in the CariesCare International ™ practical guide as a reference through clinical and radiographic evaluation versus histological evaluation. Ninety-seven permanent posterior teeth were evaluated, and clinical and radiographic diagnoses were determined according to parameters defined in the CariesCare International™ guide as a reference. Subsequently, histological evaluation was performed to compare each stage of dental caries progression, and statistical analysis was applied. When comparing the validity and prediction values between radiographic and clinical diagnoses in relation to histological evaluation, a low sensitivity and high specificity relationship was found. The sensitivity and specificity percentages between the clinical and radiographic methods show that the clinical method has a lower number of false negatives. Histological changes in dental tissue were evident from the earliest stages of lesions, even in those not related to the caries process, indicating that the dentist should be careful when deciding on a treatment plan and take into account all variables involved in the caries process, as proposed by the CariesCare International ™ guide.

La guía práctica CariesCare International™ es una herramienta para la evaluación y tratamiento integral de la caries que sintetiza el diagnóstico clínico y radiográfico y los factores de riesgo, clasificando la gravedad, progresión y actividad de las lesiones. El objetivo de este estudio fue analizar la validez y características de predicción de la clasificación de caries dental propuesta en la guía práctica CariesCare International™ como referencia a través de la evaluación clínica y radiográfica versus la evaluación histológica. Se evaluaron noventa y siete dientes posteriores permanentes y se determinaron diagnósticos clínicos y radiográficos según parámetros definidos en la guía CariesCare International™ como referencia. Posteriormente se realizó una evaluación histológica para comparar cada etapa de progresión de la caries dental y se aplicó análisis estadístico. Al comparar los valores de validez y predicción entre los diagnósticos radiológicos y clínicos en relación con la evaluación histológica, se encontró una relación de baja sensibilidad y alta especificidad. Los porcentajes de sensibilidad y especificidad entre el método clínico y radiográfico muestran que el método clínico tiene un menor número de falsos negativos. Los cambios histológicos en el tejido dental fueron evidentes desde las primeras etapas de las lesiones, incluso en aquellas no relacionadas con el proceso de caries, lo que indica que el odontólogo debe tener cuidado al decidir un plan de tratamiento y tener en cuenta todas las variables involucradas en el proceso de caries, tal como propone la guía CariesCare International™.

3D intraoral scanning techniques support the effects of crown morphology on dental caries.

BACKGROUND: With the development and utilization of three-dimensional (3D) intraoral scanning (IOS) technology, the morphological characteristics of teeth were quantitatively assessed. In this research, we aimed to explore the prevalence of dental caries in relation to each measurable morphological indicator of the tooth body via 3D intraoral scanning techniques. METHODS: A hospital-based single-centre study was conducted at our hospital from Dec. 2021 to Apr. 2023. A total of 53 patients were involved in the study, providing complete morphological data for 79 teeth. Each patient completed an oral hygiene routine questionnaire and underwent examination by an experienced dentist to evaluate caries conditions before undergoing 3D intraoral scanning to obtain a digital dental model. Geomagic Studio 2014 was used to extract oral morphological data from the models. The acquired data were entered, cleaned and edited using Excel 2016 and subsequently exported to SPSS version 25.0 for analysis. Chi-square analysis and logistic regression analyses were employed to test the associations. RESULTS: Among the participants, 33 (61.1%) were female, with a mean age of 26.52 ± 10.83 years. Significant associations were found between dental caries and the vertical distance between the distal tip and the gum (OR 14.02; 95% CI 1.80-109.07; P = 0.012), the distal lateral horizontal distance of occlusion (OR 0.40; 95% CI 0.18-0.90; P = 0.026), and the mesial horizontal distance of occlusion (OR 2.20; 95% CI 1.12-4.31; P = 0.021). The Hosmer-Lemeshow test indicated a P value of 0.33. CONCLUSIONS: The vertical distance between the distal tip and the gum, the distal lateral horizontal distance of the occlusion and the mesial horizontal distance of the occlusion were the influencing factors for dental caries (identified as independent risk factors). We hypothesize that these factors may be associated with the physiological curvature of teeth and the role of chewing grooves in plaque formation over time. However, further studies involving larger population samples and more detailed age stratification are still needed.

Fungi and bacteria occupy distinct spatial niches within carious dentin.

The role of bacteria in the etiology of dental caries is long established, while the role of fungi has only recently gained more attention. The microbial invasion of dentin in advanced caries especially merits additional research. We evaluated the fungal and bacterial community composition and spatial distribution within carious dentin. Amplicon 16S rRNA gene sequencing together with quantitative PCR was used to profile bacterial and fungal species in caries-free children (n = 43) and 4 stages of caries progression from children with severe early childhood caries (n = 32). Additionally, healthy (n = 10) and carious (n = 10) primary teeth were decalcified, sectioned, and stained with Grocott's methenamine silver, periodic acid Schiff (PAS) and calcofluor white (CW) for fungi. Immunolocalization was also performed using antibodies against fungal ß-D-glucan, gram-positive bacterial lipoteichoic acid, gram-negative endotoxin, Streptococcus mutans, and Candida albicans. We also performed field emission scanning electron microscopy (FESEM) to visualize fungi and bacteria within carious dentinal tubules. Bacterial communities observed included a high abundance of S. mutans and the Veillonella parvula group, as expected. There was a higher ratio of fungi to bacteria in dentin-involved lesions compared to less severe lesions with frequent preponderance of C. albicans, C. dubliniensis, and in one case C. tropicalis. Grocott's silver, PAS, CW and immunohistochemistry (IHC) demonstrated the presence of fungi within carious dentinal tubules. Multiplex IHC revealed that fungi, gram-negative, and gram-positive bacteria primarily occupied separate dentinal tubules, with rare instances of colocalization. Similar findings were observed with multiplex immunofluorescence using anti-S. mutans and anti-C. albicans antibodies. Electron microscopy showed monomorphic bacterial and fungal biofilms within distinct dentin tubules. We demonstrate a previously unrecognized phenomenon in which fungi and bacteria occupy distinct spatial niches within carious dentin and seldom co-colonize. The potential significance of this phenomenon in caries progression warrants further exploration.

Assessment of dental pulp response to carries via MR T2mapping and histological analysis.

OBJECTIVES: The aim of our study was to assess the correlation between T2 relaxation times and their variability with the histopathological results of the same teeth in relation to caries progression. MATERIALS AND METHODS: 52 extracted permanent premolars were included in the study. Prior to extractions, patients underwent magnetic resonance imaging (MRI) scanning and teeth were evaluated using ICDAS classification. Pulps of extracted teeth were histologically analysed. RESULTS: MRI T2 relaxation times (ms) were 111,9 ± 11.2 for ICDAS 0, 132.3 ± 18.5* for ICDAS 1, 124.6 ± 14.8 for ICDAS 2 and 112. 6 ± 18.2 for ICDAS 3 group (p = 0,013). A positive correlation was observed between MRI T2 relaxation times and macrophage and T lymphocyte density in healthy teeth. There was a positive correlation between vascular density and T2 relaxation times of dental pulp in teeth with ICDAS score 1. A negative correlation was found between T2 relaxation times and macrophage density. There was a positive correlation between T2 relaxation time variability and macrophage and T lymphocyte density in teeth with ICDAS score 2. In teeth with ICDAS score 3, a positive correlation between T2 relaxation times and T2 relaxation time variability and lymphocyte B density was found. CONCLUSION: The results of our study confirm the applicability of MRI in evaluation of the true condition of the pulp tissue. CLINICAL RELEVANCE: With the high correlation to histological validation, MRI method serves as a promising imaging implement in the field of general dentistry and endodontics.

Temporal pattern of dental caries at the western flank of the Central Plateau of Iran, c. 2700 BCE - 1600 CE.

OBJECTIVE: To analyze the overall frequency and inter-tooth patterns of caries in three populations from ancient cemeteries located along the western border of the Central Iranian Plateau as a means to explore whether the populations of Iran had greater access to fermentable sugars after the establishment of the great empires. MATERIALS: Dental collections from Kafarved-Varzaneh (Early Bronze Age, MNI=66), Estark-Joshaqan (Iron Age, MNI=57), Tappeh Poustchi (Timurid and Safavid Period, MNI=34), together with comparative data from NE Syria. METHODS: Frequencies of dental caries per tooth categories, location and size of carious lesions are analyzed using Smith's Mean Measure of Divergence, Correspondence Analysis, χ2 and Kruskal-Wallis tests. RESULTS: There are minimal differences in overall frequencies of carious lesions at Iranian sites, regardless of the chronology, but notable differences at Syrian sites. The inter-tooth pattern at the Iron Age cemetery in Estark appears distinctly different than the other Iranian sites and the comparative samples from Syria. CONCLUSIONS: Divergent subsistence strategies may be linked with different inter-tooth patterns since people buried at Estark were mobile herders, while the other cemeteries were used by settled farmers. SIGNIFICANCE: This comprehensive research on dental caries in three chronologically diverse populations in Iran sheds light on the association between dental caries and subsistence strategies, and introduces the Smith's Mean Measure of Divergence to explore inter-tooth carious patterns, which may prove useful to other researchers seeking to understand the relationships between subsistence, diet, and the presence of carious lesions. LIMITATIONS: The studied sample size is relatively small and therefore its temporal/regional distribution produces low-resolution results. SUGGESTIONS FOR FURTHER RESEARCH: More systematic research on the patterns of dental caries is necessary to produce more fine-grained reconstructions of diet and subsistence in Iran and around the globe.

An in vitro assessment of the residual dentin after using three minimally invasive caries removal techniques.

To evaluate the efficiency and effectiveness of three minimally invasive (MI) techniques in removing deep dentin carious lesions. Forty extracted carious molars were treated by conventional rotary excavation (control), chemomechanical caries removal agent (Brix 3000), ultrasonic abrasion (WOODPECKER, GUILIN, China); and Er, Cr: YSGG laser ablation (BIOLASE San Clemente, CA, USA). The assessments include; the excavation time, DIAGNOdent pen, Raman spectroscopy, Vickers microhardness, and scanning electron microscope combined with energy dispersive X-ray spectroscopy (SEM-EDX). The rotary method recorded the shortest excavation time (p < 0.001), Brix 3000 gel was the slowest. DIAGNOdent pen values ranged between 14 and 18 in the remaining dentin and laser-ablated surfaces recorded the lowest reading (p < 0.001). The Ca:P ratios of the remaining dentin were close to sound dentin after all excavation methods; however, it was higher in the ultrasonic technique (p < 0.05). The bur-excavated dentin showed higher phosphate and lower matrix contents with higher tissue hardness that was comparable to sound dentin indicating the non-selectiveness of this technique in removing the potentially repairable dentin tissue. In contrast, the MI techniques exhibited lower phosphate and higher organic contents associated with lower microhardness in the deeper dentin layers. This was associated with smooth residual dentin without smearing and patent dentinal tubules. This study supports the efficiency of using MI methods in caries removal as conservative alternatives to rotary excavation, providing a promising strategy for the clinical dental practice.

Comparing the effectiveness of caries arrest by micro-operative treatment to operative treatment: A 2-year randomized controlled clinical trial.

OBJECTIVES: To compare the effectiveness of caries arrest by micro-operative treatment (sealing) to operative treatment (flowable resin composite restoration) through a 2-year randomized controlled clinical trial. MATERIALS AND METHODS: A prospective randomized controlled trial was conducted among 7-9-year-old children. At baseline, 630 subjects were screened and 92 children who had at least one carious lesion classified as ICDAS 3 on the pit and fissure of first permanent molar were included. Then they were randomly assigned to the sealant group (73 lesions) and the flowable resin composite group (76 lesions) to receive the corresponding intervention. Lesions status in each group was evaluated every 6 months up to 24 months. Clinical progression of dental caries and materials retention were the outcomes used for group comparisons at p-value < 0.05. RESULTS: After 24 months, three lesions (4.1%) in the sealant group clinically progressed to dentin caries. No lesion in the flowable composite group was observed a progression. The results of Life-table survival analysis show that the cumulative caries arrest rate had no statistically significant difference between the two groups (p = 0.075). However, the cumulative retention rate was 57.5% in the sealant group and 92.1% in the flowable composite group, with significant differences (p < 0.001). The multilevel mixed model showed the sealant had higher risk of retention failure than the flowable composite (OR = 8.66, p < 0.001), while tooth position did not influence material retention (p = 0.083). In addition, the results of Fisher Exact test show that dentin lesions had more retention failure than enamel lesions in the sealant group (p = 0.026). CONCLUSION: Although sealing microcavitated carious lesions of the first permanent molar achieved lower retention rate than resin composite restoration, both sealing and restoration effectively arrested caries progression for two years. CLINICAL RELEVANCE: To preserving dental structure and delaying or eliminating the need for operative procedures, microcavitated carious lesion can be arrested by sealing. TRIAL REGISTRATION: Registered at http://www.chictr.org.cn ; Feb 15th, 2020; No. ChiCTR2000029862.

Sixty-month comperative evaluation of a glass hybrid restorative and a composite resin in non-carious cervical lesions of bruxist individuals.

OBJECTIVE: To compare the clinical performance of a glass hybrid (GH) restorative and a nano-ceramic composite resin (CR) in the restoration of non-carious cervical lesions (NCCLs) of bruxist individuals in a 60-month randomized clinical trial. MATERIALS AND METHODS: Twenty-five bruxist candidates having NCCLs were recruited in this clinical study. The depth, height (cervico-incisal), width (mesio-distal), internal angles of the NCCLs, degree of tooth wear (TWI) and gingival index (GI) were measured. One hundred-and-forty-eight NCCLs were restored either with a GH restorative (Equia Forte Fil) or a CR (Ceram.X One Universal). Modified USPHS criteria was used to evaluate restorations after 1 week and 12, 24, 36 and 60 months. Pearson's Chi-Square, Fisher's Exact and Cochran Q tests were run for analysis. Survival rates of the restorations were compared with Kaplan-Meier analysis (p < 0.05). RESULTS: After 60 months, 97 restorations in 15 patients were examined. The recall rate was 60.0%. Retention rates were 73.5% for CR and 66.7% for GH. A total of 29 restorations were lost (13CR (26.5%), 16GH (33.3%)). There was not a significant difference between tested restoratives in retention (p = 0.464), marginal adaptation (p = 0.856) and marginal discoloration (p = 0.273). There was no relationship between internal angle, depth, height or width and retention of the GH or CR restorations (p > 0.05). The increase in retention loss and marginal discoloration of both restorations over time were significant (p < 0.001). Sensitivity or secondary caries were not detected after 60 months. CONCLUSION: GH and nano-ceramic CR showed similar clinical performances in NCCLs after 60 months in patients with bruxism. CLINICAL SIGNIFICANCE: After 60 months, CR and GH materials showed clinically acceptable performances in restoration of NCCLs in patients with bruxism.

The effect of combined use of resin infiltration with different bioactive calcium phosphate-based approaches on enamel white spot lesions: An in vitro study.

OBJECTIVES: This in vitro study aimed to evaluate the effect of resin infiltration combined with casein phosphopeptide-amorphous calcium phosphate with fluoride (CPP-ACPF) or bioactive glass (BAG) on the stability of enamel white spot lesions (WSLs) treatment. MATERIALS AND METHODS: Eighty-four enamel blocks were prepared from the buccal surfaces of sound human premolars. All enamel blocks were placed in a demineralisation solution for 3 days to establish the artificial enamel WSLs. Enamel blocks with WSLs were randomly divided into three groups (n = 28 each group): RI/B: one-off resin infiltration followed by twice daily BAG treatment; RI/C: one-off resin infiltration followed by twice daily CPP-ACPF treatment; RI: one-off resin infiltration treatment only (as control) and subjected to pH cycling for 7 days. Surface morphology, elemental analysis, crystal characteristics, surface roughness and microhardness of enamel surfaces were investigated by scanning electron microscopy and energy-dispersive spectrometry observation, X-ray diffraction (XRD), atomic force microscope and Vickers' hardness testing, respectively. RESULTS: Mean values of the surface roughness (mean±standard deviation (nm)) were 24.52±5.07, 27.39±5.87 and 34.36±4.55 for groups RI/B, RI/C and RI respectively (p = 0.003). The calcium to phosphate ratios were 1.32±0.16, 1.22±0.26 and 0.69±0.24 for groups RI/B, RI/C and RI respectively (p < 0.001). XRD revealed apatite formation in all three groups. The mean enamel surface microhardness (kg/mm2) of the groups were 353.93±28.49, 339.00±27.32 and 330.38±22.55 for groups RI/B, RI/C and RI respectively (p = 0.216). CONCLUSIONS: Resin infiltration combined with CPP-ACPF or BAG remineralisation appears to improve the surface properties of WSLs. CLINICAL SIGNIFICANCE: The combination of resin infiltration and CPP-ACPF/BAG remineralisation may be a potential treatment for the management of the WSLs.

AI-Dentify: deep learning for proximal caries detection on bitewing x-ray - HUNT4 Oral Health Study.

BACKGROUND: Dental caries diagnosis requires the manual inspection of diagnostic bitewing images of the patient, followed by a visual inspection and probing of the identified dental pieces with potential lesions. Yet the use of artificial intelligence, and in particular deep-learning, has the potential to aid in the diagnosis by providing a quick and informative analysis of the bitewing images. METHODS: A dataset of 13,887 bitewings from the HUNT4 Oral Health Study were annotated individually by six different experts, and used to train three different object detection deep-learning architectures: RetinaNet (ResNet50), YOLOv5 (M size), and EfficientDet (D0 and D1 sizes). A consensus dataset of 197 images, annotated jointly by the same six dental clinicians, was used for evaluation. A five-fold cross validation scheme was used to evaluate the performance of the AI models. RESULTS: The trained models show an increase in average precision and F1-score, and decrease of false negative rate, with respect to the dental clinicians. When compared against the dental clinicians, the YOLOv5 model shows the largest improvement, reporting 0.647 mean average precision, 0.548 mean F1-score, and 0.149 mean false negative rate. Whereas the best annotators on each of these metrics reported 0.299, 0.495, and 0.164 respectively. CONCLUSION: Deep-learning models have shown the potential to assist dental professionals in the diagnosis of caries. Yet, the task remains challenging due to the artifacts natural to the bitewing images.

Occlusal caries detection and monitoring using a 3D intraoral scanner system. An in vivo assessment.

OBJECTIVE: To assess the agreement in detecting and monitoring occlusal caries over thirty months using conventional visual and radiographic assessment and an intraoral scanner system which supports automated caries scoring. METHODS: Ninety-one young participants aged 12-19 years were included in the study. All occlusal surfaces were examined visually, radiographically (when indicated), and scanned with the TRIOS 4 intraoral scanner. TRIOS Patient Monitoring software (vers. 2.3, 3Shape TRIOS A/S, Denmark) was used for automated caries detection on the 3D digital models. RESULTS: Fifty-five of the study participants were re-examined after 30-months. Significant differences regarding caries detection were found between the conventional methods and the automated caries scoring system (p < 0.01), with moderate positive percent agreement (49-61%) and high negative percent agreement (87-98%). All methods reported significant caries progression over the follow-up period (p < 0.01). However, the automated system showed significantly more caries progression than the other methods (p < 0.01). CONCLUSIONS: The software for automated caries detection and classification showed moderate positive agreement and strong negative agreement with the conventional methods considering both the baseline and the follow-up assessments. The automated caries scoring system detected significantly fewer caries lesions and tended to underestimate the caries severity. All methods indicated significant caries progression over the follow-up period, while the automated system detected more caries progression. CLINICAL SIGNIFICANCE: The TRIOS system supporting automated occlusal caries detection and classification can assist in detecting and monitoring occlusal caries on permanent teeth as a complementary tool to the conventional methods. However, the operator should be aware that the automated system shows a tendency to underestimate the caries presence and lesion severity.

High-Resolution Characterization of Enamel Remineralization Using Time-of-Flight Secondary Ion Mass Spectrometry and Electron Microscopy.

INTRODUCTION: The aim of this in vitro study was to assess the suitability of high-resolution time-of-flight secondary ion mass spectrometry (ToF-SIMS) for visualizing cross-sectional changes in human enamel microstructure and chemical composition during treatment and remineralization cycling of artificially generated caries lesions underneath an artificial plaque. METHODS: Treatments consisted of exposure to twice daily toothpaste/water slurries prepared from 0, 1,100, and 5,000 µg/g fluoride (F) NaF/silica toothpastes. In addition, treatments with slurries prepared from 1,100 µg/g F SnF2/silica toothpastes were done using 44Ca in the remineralization solution to allow for differentiation of newly formed mineral and exploration of incorporated metal dopants using ToF-SIMS. Complementary microhardness, scanning electron microscopy, and high-resolution transmission electron microscopy (HR-TEM) investigations were performed on enamel cross sections. RESULTS: HR-TEM was used for the first time to determine the change in crystallinity during remineralization revealing distinct microstructural zones within one lesion. Chemical mapping using ToF-SIMS demonstrated that the distribution of F, while observed primarily in the new mineral phase, was widespread throughout the lesion with 44Ca substantially limited to the remineralizing mineral. Both penetrated the inter-rod spaces of the sound enamel illustrating how acid damage propagates into the native mineral as the caries lesion deepens. HR-TEM examination revealed different regions within the lesion characterized by distinct micro- and ultrastructures. Importantly, HR-TEM revealed a return of crystallinity following remineralization. F dose-response observations verified the ability of these high-resolution techniques to differentiate remineralization efficacy. CONCLUSION: The collective results provided new insights such as the visualization of F or calcium penetration pathways, as well as new tools to study the caries process.

Volumetric analysis after caries excavation with caries detecting dyes and chemomechanical caries removal agents using 3D scanner-a randomised clinical trial.

AIM: This research aimed to use an extra-oral 3D scanner for conducting volumetric analysis after caries excavation using caries-detecting dyes and chemomechanical caries removal agents in individuals with occlusal and proximal carious lesions. METHODS: Patients with occlusal (A1, A2, A3) and proximal carious lesions (B1, B2, B3) were treated with the conventional rotary technique, caries detecting dyes (CDD) and chemomechanical caries removal (CMCR) method on 90 teeth (n = 45 for each). Group A1, B1: Excavation was performed using diamond points. Group A2, B2: CDD (Sable Seek™ caries indicator, Ultradent) was applied and left for 10 s, and then the cavity was rinsed and dried. For caries removal, diamond points or excavators were used. Group A3 and B3: BRIX3000 papain gel was applied with a micro-brush for 20 s and was activated for 2 min, and then the carious tissue was removed with a sharp spoon excavator. Post-excavation cavity volume analysis was performed using a 3D scanner. The time required and the verbal pain score (VPS) for pain were scored during excavation. Post-restoration evaluation was performed at 1, 3, and 6 months FDI (Federation Dentaire Internationale) criteria. RESULTS: Comparison of age, time and volume with study groups were made using Independent Sample' t' test and one-way analysis of variance (ANOVA) for two and more than two groups, respectively. Using Cohen's Kappa Statistics, evaluators 1 and 2 agreed on caries removal status aesthetic, functional and biological properties at different follow-ups. The chi-square test revealed that the rotary groups [A1(2.5 ± 0.4 min) B1(4.0 ± 0.4 min)] had significantly less (p = 0.000) mean procedural time than CDD [A2(4.5 ± 0.4 min) B2(5.7 ± 0.4 min)] and CMCR [A3(5.4 ± 0.7 min) B3(6.2 ± 0.6 min)] groups. The CMCR group showed better patient acceptance and less pain during caries excavation than the rotary and CDD groups. CMCR group showed significantly less mean caries excavated volume(p = 0.000). Evaluation of restoration after 1-, 3-, and 6-month intervals was acceptable for all the groups. CONCLUSION: Brix3000 helps effectively remove denatured teeth with less pain or sensitivity. The time required for caries removal was lowest in the rotary method and highest in the brix3000 group, while the volume of caries removed was the lowest for brix3000 and highest for the rotary group.

Effect of calcium-coacervate infiltration of artificial enamel caries lesions in de- and remineralizing conditions.

OBJECTIVES: Calcium-coacervate emulsions (CC) might be considered as mineral precursors to foster remineralization of carious dental hard tissues. This study analyzed the instant effect of repeated infiltration of artificial caries lesions with a CC emulsion as well as the effects of subsequent exposure of CC-infiltrated lesions to demineralizing and remineralizing environments. METHODS: Bovine enamel specimens were partly covered with varnish to leave three exposed windows. Artificial enamel caries lesions were created (pH 4.95, 17d). Baseline controls (BL) were obtained by preparing a thin section of each specimen. Specimens were allocated to five groups. In three groups lesions were etched with 37 % phosphoric acid gel, infiltrated with dipotassium hydrogen phosphate and subsequently with a calcium coacervate emulsion, prepared by mixing CaCl2 ⋅ 2H2O with polyacrylic acid sodium salt (PAA-Na). Subsequently, the infiltration effect was either analyzed immediately (Inf.) or after exposition to either de- (Inf.+DS) or remineralizing solution (Inf.+RS) for 10 or 20 days, respectively. In two control groups specimens were exposed to either DS or RS, respectively without prior CC infiltration. Integrated mineral loss [ΔZ(vol%×µm)] was analyzed using transverse microradiography (TMR). RESULTS: Infiltration of enamel caries lesions with coacervate solution resulted in only subtle immediate mineral gain even if repeated. When exposed to demineralizing conditions, infiltrated lesions showed significantly less mineral loss compared to untreated controls (p < 0.05; Kruskal Wallis) and exhibited characteristic mineral depositions within the lesion body. CONCLUSIONS: While immediate mineral gain by infiltration was only modest, the CC-emulsion might be able to prevent demineralization in acidic conditions. CLINICAL SIGNIFICANCE: Calcium coacervates might act protective against further demineralization when infiltrated into enamel caries lesions.

Use of micro-computed tomography and scanning electron microscopy with energy-dispersive spectroscopy to distinguish natural white spot enamel lesions from sound enamel in human premolars.

PURPOSE: The aim of the present study was to develop a novel method for distinguishing white spot lesions (WSLs) from sound enamel in human premolars using micro-computed tomography (micro-CT) and scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS), and to examine differences in surface morphology, chemical composition, and mineral density (MD) between these two areas. METHODS: Fourteen premolars with natural WSLs on the enamel surface of the crowns were examined. After sectioning the teeth, each specimen containing WSLs adjacent to intact enamel was examined for MD, surface morphology, and atomic percentages (At%) of chemical components using micro-CT and SEM/EDS, respectively. Differences between these areas of the same specimen were analyzed statistically using paired t-test. RESULTS: SEM images highlighted increased roughness and irregularity in the lesion area. EDS analysis revealed significant reductions in calcium (Ca), phosphorus (P), fluorine (F), chlorine (Cl), and sodium (Na) levels at the lesion surface in comparison to intact enamel (P < 0.05). The decreases in the MD of the lesions were statistically significant in comparison to sound enamel (P < 0.05). CONCLUSION: These findings provide standard measurements for evaluating the essential characteristics of WSLs and intact enamel, being vital for assessment of treatment outcomes and development of innovative biomaterials for management of hypo-mineralized enamel lesions.