Comb-Like Amphiphilic Polycarbonates with Different Lengths of Cationic Branches for Enhanced siRNA Delivery.

Owing to the biodegradability and good biocompatibility polycarbonates show the versatile class of applications in biomedical fields. While their poor functional ability seriously limited the development of functional polycarbonates. Herein, a new Br-containing cyclic carbonate (MTC-Br) and a polycarbonate atom transfer radical polymerization (ATRP) macro-initiator (PEG-PMTC-Br) is synthesized. Then, by initiating the side-chain ATRP of 2-(dimethyl amino)ethyl methacrylate (DMAEMA) on PEG-PMTC-Br, a series of comb-like amphiphilic cationic polycarbonates, PEG-b-(PMTC-g-PDMAEMA) (GMDMs), with different lengths of cationic branches are successfully prepared. All these poly(ethylene glycol)-b-(poly((5-methyl-2-oxo-1,3-dioxane-5-yl) methyl 2-bromo-2-methylpropanoate/1,3-dioxane-2-one)-g-poly(2-dimethyl aminoethyl methacrylate) (GMDMs) self-assembled nanoparticles (NPs) (≈180 nm, +40 mV) can well bind siRNA to form GMDM/siRNA NPs. The gene silence efficiency of GMDM/siRNA high to 80%, which is even higher than the commercial transfection reagent lipo2000 (76%). But GMDM/siRNA shows lower cell uptake than lipo2000. So, the high gene silence ability of GMDM/siRNA NPs can be attributed to the strong intracellular siRNA trafficking capacity. Therefore, GMDM NPs are potential siRNA vectors and the successful preparation of comb-like polycarbonates also provides a facile way for diverse side-chain functional polycarbonates, expanding the application of polycarbonates.

Guanidinylated Amphiphilic Polycarbonates with Enhanced Antimicrobial Activity by Extending the Length of the Spacer Arm and Micelle Self-Assembly.

Nine guanidinylated amphiphilic polycarbonates are rationally designed and synthesized. Each polymer has the same biodegradable backbone but different side groups. The influence of the hydrophobic/hydrophilic effect on antimicrobial activities and cytotoxicity is systematically investigated. The results verify that tuning the length of the spacer arm between the cationic guanidine group and the polycarbonate backbone is an efficient design strategy to alter the hydrophobic/hydrophilic balance without changing the cationic charge density. A spacer arm of six methylene units (CH2 )6 shows the best antimicrobial activity (minimum inhibitory concentration, MIC = 40 µg mL-1 against Escherichia coli, MIC = 20 µg mL-1 against Staphylococcus aureus, MIC = 40 µg mL-1 against Candida albicans) with low hemolytic activity (HC50 > 2560 µg mL-1 ). Furthermore, the guanidinylated polycarbonates exhibit the ability to self-assemble and present micelle-like nanostructure due to their intrinsic amphiphilic macromolecular structure. Transmission electron microscopy and dynamic light scattering measurements confirm polymer micelle formation in aqueous solution with sizes ranging from 82 to 288 nm.

Dendritic Polyglycerol-Derived Nano-Architectures as Delivery Platforms of Gemcitabine for Pancreatic Cancer.

Dendritic polyglycerol-co-polycaprolactone (PG-co-PCL)-derived block copolymers are synthesized and explored as nanoscale drug delivery platforms for a chemotherapeutic agent, gemcitabine (GEM), which is the cornerstone of therapy for pancreatic ductal adenocarcinoma (PDAC). Current treatment strategies with GEM result in suboptimal therapeutic outcome owing to microenvironmental resistance and rapid metabolic degradation of GEM. To address these challenges, physicochemical and cell-biological properties of both covalently conjugated and non-covalently stabilized variants of GEM-containing PG-co-PCL architectures have been evaluated. Self-assembly behavior, drug loading and release capacity, cytotoxicity, and cellular uptake properties of these constructs in monolayer and in spheroid cultures of PDAC cells are investigated. To realize the covalently conjugated carrier systems, GEM, in conjunction with a tertiary amine, is attached to the polycarbonate block grafted from the PG-co-PCL core. It is observed that pH-dependent ionization properties of these amine side-chains direct the formation of self-assembly of block copolymers in the form of nanoparticles. For non-covalent encapsulation, a facile "solvent-shifting" technique is adopted. Fabrication techniques are found to control colloidal and cellular properties of GEM-loaded nanoconstructs. The feasibility and potential of these newly developed architectures for designing carrier systems for GEM to achieve augmented prognosis for pancreatic cancer are reported.

Monoether-Tagged Biodegradable Polycarbonate Preventing Platelet Adhesion and Demonstrating Vascular Cell Adhesion: A Promising Material for Resorbable Vascular Grafts and Stents.

We developed a biodegradable polycarbonate that demonstrates antithrombogenicity and vascular cell adhesion via organocatalytic ring-opening polymerization of a trimethylene carbonate (TMC) analogue bearing a methoxy group. The monoether-tagged polycarbonate demonstrates a platelet adhesion property that is 93 and 89% lower than those of poly(ethylene terephthalate) and polyTMC, respectively. In contrast, vascular cell adhesion properties of the polycarbonate are comparable to those controls, indicating a potential for selective cell adhesion properties. This difference in the cell adhesion property is well associated with surface hydration, which affects protein adsorption and denaturation. Fibrinogen is slightly denatured on the monoether-tagged polycarbonate, whereas fibronectin is highly activated to expose the RGD motif for favorable vascular cell adhesion. The surface hydration, mainly induced by the methoxy side chain, also contributes to slowing the enzymatic degradation. Consequently, the polycarbonate exhibits decent blood compatibility, vascular cell adhesion properties, and biodegradability, which is promising for applications in resorbable vascular grafts and stents.

Click Chemistry in Functional Aliphatic Polycarbonates.

Click chemistry, one of the most important methods in conjugation, plays an extremely significant role in the synthesis of functional aliphatic polycarbonates, which are a group of biodegradable polymers containing carbonate bonds in their main chains. To date, more than 75 articles have been reported on the topic of click chemistry in functional aliphatic polycarbonates. However, these efforts have not yet been highlighted. Six categories of click reactions (alkyne-azide reaction, thiol-ene reaction, Michael addition, epoxy-amine/thiol reaction, Diels-Alder reaction, and imine formation) that have been afforded for further post-polymerization modification of polycarbonates are reviewed. Through this review, a comprehensive understanding of functional aliphatic polycarbonates aims to afford insight on the design of polycarbonates for further post-polymerization modification via click chemistry and the expectation of the practical application.

Construction of Well-Defined Redox-Responsive CO2 -Based Polycarbonates: Combination of Immortal Copolymerization and Prereaction Approach.

Due to the axial group initiation in traditional (salen)CoX/quaternary ammonium catalyst system, it is difficult to construct single active center propagating polycarbonates for copolymerization of CO2 /epoxides. Here a redox-responsive poly(vinyl cyclohexene carbonate) (PVCHC) with detachable disulfide-bond backbone is synthesized in a controllable manner using (salen)CoTFA/[bis(triphenylphosphine)iminium, [PPN]TFA binary catalyst, where the axial group initiation is depressed by judiciously choosing 3,3'-dithiodipropionic acid as starter. While for those comonomers failing to obtain polycarbonate with unimodal gel permeation chromatography (GPC) curve, a versatile method is developed by combination of immortal copolymerization and prereaction approach, and functional aliphatic polycarbonates having well-defined architecture and narrow polydispersity can be prepared. The resulting PVCHC can be further functionalized with alkenes by versatile cross-metathesis reaction to tune the physicochemical properties. The combination of immortal polymerization and prereaction approach creates a powerful platform for controllable synthesis of functional CO2 -based polycarbonates.

Tuning the Selectivity of Biodegradable Antimicrobial Cationic Polycarbonates by Exchanging the Counter-Anion.

There is a growing interest in modern healthcare to develop systems able to fight antibiotic resistant bacteria. Antimicrobial cationic biodegradable polymers able to mimic antimicrobial peptides have shown to be effective against both Gram-positive and Gram-negative bacteria. In these systems, the hydrophilic-hydrophobic ratio and the cationic charge density play a pivotal role in defining the killing efficiency. Nevertheless, many of these antimicrobial polymers show relatively low selectivity as defined by the relative toxicity to mammalian cells or hemolysis relative to pathogens. In this study, a series of polycarbonates containing pendant quaternary ammoniums are used to understand the role of different counter-anions including chloride, citrate, malonate, benzoate, acetate, lactate and trifluoroacetate, and the antibiotic penicillin on antimicrobial efficacy and selectivity. Interestingly, it is found that in spite of the strong antimicrobial activity of trifluoroacetate and benzoate anions, they prove to be much less hemolytic than chloride anion. It is believed that the proper selection of the anion could enhance the potential of antimicrobial polymers to fight against clinically relevant pathogenic infections, while concurrently mitigating harmful side effects.

Synthesis and characterization of shape-memory poly carbonate urethane microspheres for future vascular embolization.

Two types of shape memory poly carbonate urethanes (PCUs) microspheres were synthesized by pre-polymerization and suspension polymerization, based on Polycarbonate diol (PCDL) as the soft segment, Isophorone diisocyanate (IPDI) and 1,6-hexamethylene diisocyanate (HDI) as the hard segments and 1,4-butanediol (BDO) as the chain expanding agent. The structure, crystallinity, and thermal property of the two synthesized PCUs were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Differential scanning calorimetery (DSC), respectively. The results showed that the two types of PCUs exhibited high thermal stability with phase separation and semi-crystallinity. Also, the results of the compression test displayed that the shape fixity and the shape recovery of two PCUs were more than 90% compared to the originals, indicating their similar bio-applicability and shape-memory properties. The tensile strength, elongation at break was enhanced by introducing and increasing content of HDI. The water contact angles of PCUs decreased and their surface tension increased by surface modified with Bovine serum albumin (BSA). Furthermore, the biological study results of two types of PCUs from the platelet adhesion test and the cell proliferation inhibition test indicated they had some biocompatibilites. Hence, the PCU microspheres might represent a smart and shape-memory embolic agent for vascular embolization.

Copolymerization of Epichlorohydrin and CO2 Using Zinc Glutarate: An Additional Application of ZnGA in Polycarbonate Synthesis.

The use of zinc glutarate (ZnGA) as a heterogeneous catalyst for the copolymerization of epichlorohydrin, an epoxide with an electron-withdrawing substituent, and CO2 is reported. This catalyst shows the highest selectivity (98%) for polycarbonate over the cyclic carbonate in epichlorohydrin/CO2 copolymerization under mild conditions. The (epichlorohydrin-co-CO2 ) polymer exhibits a high glass transition temperature (Tg ), 44 °C, which is the maximum Tg value obtained for the (epichlorohydrin-co-CO2 ) polymer to date.

Synthesis and characterization of polyhedral oligomeric titanized silsesquioxane: A new biocompatible cage like molecule for biomedical application.

Organic-inorganic hybrid materials have shown improved properties to be used as biocompatible coating in biomedical applications. Polyhedral oligomeric silsesquioxane (POSS) containing coatings are among hybrid materials showing promising properties for these applications. In this work an open cage POSS has been reacted with a titanium alkoxide to end cap the POSS molecule with titanium atom to obtain a so called polyhedral oligomeric metalized silsesquioxane (POMS). The synthesized POMS was characterized by FTIR, RAMAN and UV-visible spectroscopy as well as (29)Si NMR and matrix assisted laser desorption/ionization time-of-flight (MALDI-TOF) techniques. Appearance of peaks at 920 cm(-1) in FTIR and 491 cm(-1) and 1083 cm(-1) in Raman spectra confirmed Si-O-Ti linkage formation. It was also demonstrated that POMS was in a monomeric form. To evaluate the biocompatibility of hybrids films, pristine POSS and synthesized POMS were used in synthesis of a polycarbonate urethane polymer. Results revealed that POMS containing hybrid, not only had notable thermal and mechanical stability compared to POSS containing one, as demonstrated by DSC and DMTA analysis, they also showed controlled surface properties in such a manner that hydrophobicity and biocompatibility were both reachable to give rise to improved cell viability in presence of human umbilical vein endothelial cells (HUVEC) and MRC-5 cells.

Aliphatic polycarbonates based on carbon dioxide, furfuryl glycidyl ether, and glycidyl methyl ether: reversible functionalization and cross-linking.

Well-defined poly((furfuryl glycidyl ether)-co-(glycidyl methyl ether) carbonate) (P((FGE-co-GME)C)) copolymers with varying furfuryl glycidyl ether (FGE) content in the range of 26% to 100% are prepared directly from CO2 and the respective epoxides in a solvent-free synthesis. All materials are characterized by size-exclusion chromatography (SEC), (1)H NMR spectroscopy, and differential scanning calorimetry (DSC). The furfuryl-functional samples exhibit monomodal molecular weight distributions with Mw/Mn in the range of 1.16 to 1.43 and molecular weights (Mn) between 2300 and 4300 g mol(-1). Thermal properties reflect the amorphous structure of the polymers. Both post-functionalization and cross-linking are performed via Diels-Alder chemistry using maleimide derivatives, leading to reversible network formation. This transformation is shown to be thermally reversible at 110 °C.

Formulation and photoirradiation parameters that influenced photoresponsive drug delivery using alkoxylphenacyl-based polycarbonates.

Recently, we reported the synthesis and biocompatibility of alkoxylphenacyl-based polycarbonates (APP); a promising new class of polymers that undergo photo-induced chain scission. In the current study, nanoparticles (NPs) were prepared from the APP polymer (APP-NPs) and loaded with doxorubicin (DOX) (DOX-APP-NPs) in order to identify and evaluate formulation and photoirradiation parameters that influence photoresponsive efficacy. Stable and spherical APP-NPs were prepared with diameters between 70-80nm depending on APP concentration (10-40mg/mL). There was a direct relationship between APP concentration and resultant particle size. Drug release studies indicated that exposure to the photo-trigger was capable of altering the rate and extent of DOX released. Photoresponsive DOX release was markedly influenced by the frequency of photoirradiation while the effect of APP concentration was most likely propagated through NP size. DOX released by photoactivation retained its efficacy as assessed by cytotoxicity studies in human lung adenocarcinoma (A549) cells. Studies in BALB/c mice indicated that DOX-APP-NPs induce less cardiotoxicity than DOX alone and that DOX-APP-NPs are not susceptible to dose dumping after photoirradiation.

Isocyanate- and phosgene-free routes to polyfunctional cyclic carbonates and green polyurethanes by fixation of carbon dioxide.

The catalytic chemical fixation of carbon dioxide by carbonation of oxiranes, oxetanes, and polyols represents a very versatile green chemistry route to environmentally benign di- and polyfunctional cyclic carbonates as intermediates for the formation of non-isocyanate poly-urethane (NIPU). Two synthetic pathways lead to NIPU thermoplastics and thermosets: i) polycondensation of diacarbamates or acyclic dicarbonates with diols or diamines, respectively, and ii) polyaddition by ring-opening polymerization of di- and polyfunctional cyclic carbonates with di- and polyamines. The absence of hazardous and highly moisture-sensitive isocyanates as intermediates eliminates the need for special safety precautions, drying and handling procedures. Incorporated into polymer backbones and side chains, carbonate groups enable facile tailoring of a great variety of urethane-functional polymers. As compared with conventional polyurethanes, ring-opening polymerization of polyfunctional cyclic carbonates affords polyhydroxyurethanes with unconventional architectures including NIPUs containing carbohydrate segments. NIPU/epoxy hybrid coatings can be applied on wet surfaces and exhibit improved adhesion, thermal stability and wear resistance. Combining chemical with biological carbon dioxide fixation affords 100% bio-based NIPUs derived from plant oils, terpenes, carbohydrates, and bio polyols. Biocompatible and biodegradable NIPU as well as NIPU biocomposites hold great promise for biomedical applications.

Advanced drug and gene delivery systems based on functional biodegradable polycarbonates and copolymers.

Biodegradable polymeric nanocarriers are one of the most promising systems for targeted and controlled drug and gene delivery. They have shown several unique advantages such as excellent biocompatibility, prolonged circulation time, passive tumor targeting via the enhanced permeability and retention (EPR) effect, and degradation in vivo into nontoxic products after completing their tasks. The current biodegradable drug and gene delivery systems exhibit, however, typically low in vivo therapeutic efficacy, due to issues of low loading capacity, inadequate in vivo stability, premature cargo release, poor uptake by target cells, and slow release of therapeutics inside tumor cells. To overcome these problems, a variety of advanced drug and gene delivery systems has recently been designed and developed based on functional biodegradable polycarbonates and copolymers. Notably, polycarbonates and copolymers with diverse functionalities such as hydroxyl, carboxyl, amine, alkene, alkyne, halogen, azido, acryloyl, vinyl sulfone, pyridyldisulfide, and saccharide, could be readily obtained by controlled ring-opening polymerization. In this paper, we give an overview on design concepts and recent developments of functional polycarbonate-based nanocarriers including stimuli-sensitive, photo-crosslinkable, or active targeting polymeric micelles, polymersomes and polyplexes for enhanced drug and gene delivery in vitro and in vivo. These multifunctional biodegradable nanosystems might be eventually developed for safe and efficient cancer chemotherapy and gene therapy.

Folate-conjugated amphiphilic block copolymers for targeted and efficient delivery of doxorubicin.

In this paper, novel biodegradable amphiphilic block copolymers based on folate-conjugated poly(ethylene glycol)-b-copolycarbonates (FA-PEG-b-P(MAC-co-DTC)) and methoxy poly(ethylene glycol)-b-copolycarbonates (mPEG-b-P(MAC-co-DTC)) were successfully synthesized for targeted and efficient delivery of doxorubicin (DOX) to cancer cells. Immobilized porcine pancreas lipase (IPPL) was employed as the catalyst to perform the ring-opening copolymerization in bulk, while the folate-conjugated poly(ethylene glycol) (FA-PEG) or methoxy poly(ethylene glycol) (mPEG) was used as the initiator. The resulting copolymers, characterized by (1)H NMR and GPC, could self-assemble to form nano-sized micelles in aqueous solution by dialysis method. P(MAC-co-DTC) acted as the hydrophobic core, thereby aggregating hydrophilic PEG chains as the outer shell with FA as targeting ligand located at the surface of the polymeric micelles. Transmission electron microscopy (TEM) observation showed that the micelles dispersed in spherical shape with nano-size before and after DOX loading. Both the FA-conjugated and non-conjugated block copolymers showed low cellular cytotoxicity. Furthermore, as compared to the non-conjugated copolymers, much more efficient cellular uptake of the FA-conjugated copolymers via FA-receptor-mediated endocytosis could be observed by confocal laser scanning microscopy (CLSM), while MTT assays also demonstrated highly potent cytotoxic activity against HeLa cells.

Synergistic co-delivery of membrane-disrupting polymers with commercial antibiotics against highly opportunistic bacteria.

A series of vitamin E-containing biodegradable antimicrobial cationic polycarbonates is designed and synthesized via controlled organocatalytic ring-opening polymerization. The incorporation of vitamin E significantly enhances antimicrobial activity. These polymers demonstrate broad-spectrum antimicrobial activity against various microbes, e.g., S. aureus (Gram-positive), E-coli (Gram-negative) and C. albicans (fungi). More importantly, the co-delivery of such polymers with selected antibiotics (e.g., doxycycline) shows high synergism towards difficult-to-kill bacteria P. aeruginosa. These findings suggest that these vitamin E-functionalized polycarbonates are potentially useful antimicrobial agents against challenging bacterial/fungal infections.

Propargyl-functional aliphatic polycarbonate obtained from carbon dioxide and glycidyl propargyl ether.

The synthesis of propargyl-functional poly(carbonate)s with different content of glycidyl propargyl ether (GPE) units is achieved via the copolymerization of propargyl glycidyl ether and carbon dioxide. A new type of functional poly(carbonate) synthesized directly from CO(2) and the glycidyl ether is obtained. The resulting polymers show moderate polydispersities in the range of 1.6-2.5 and molecular weights in the range of 7000-10 500 g mol(-1). The synthesized copolymers with varying number of alkyne functionalities and benzyl azide are used for the copper-catalyzed Huisgen-1,3-dipolar addition. Moreover, the presence of vicinal alkyne groups opens a general pathway to produce functional aliphatic poly(carbonate)s from a single polymer scaffold.

Polycarbonates derived from glucose via an organocatalytic approach.

An organocatalyzed ring-opening polymerization methodology was developed for the preparation of polycarbonates derived from glucose as a natural product starting material. The cyclic 4,6-carbonate monomer of glucose having the 1, 2, and 3 positions methyl-protected was prepared in three steps from a commercially available glucose derivative, and the structure was confirmed by means of NMR and IR spectroscopies, electrospray ionization mass spectrometry (MS), and single-crystal X-ray analysis. Polymerization of the monomer, initiated by 4-methylbenzyl alcohol in the presence of 1,5,7-triazabicyclo[4.4.0]dec-5-ene as the organocatalyst, proceeded effectively in a controlled fashion to afford the polycarbonate with a tunable degree of polymerization, narrow molecular weight distribution, and well-defined end groups, as confirmed by a combination of NMR spectroscopy, gel-permeation chromatography, and MALDI-TOF MS. A distribution of head-to-head, head-to-tail, and tail-to-tail regiochemistries was determined by NMR spectroscopy and tandem MS analysis by electron transfer dissociation. These polycarbonates are of interest as engineering materials because of their origination from renewable resources combined with their amorphous character and relatively high glass transition temperatures as determined by X-ray diffraction and differential scanning calorimetry studies.

Synthesis and post-polymerisation modifications of aliphatic poly(carbonate)s prepared by ring-opening polymerisation.

Owing to their low toxicity, biocompatibility and biodegradability, aliphatic poly(carbonate)s have been widely studied as materials for biomedical application. Furthermore, the synthetic versatility of the six-membered cyclic carbonates for the realization of functional degradable polymers by ring-opening polymerisation has driven wider interest in this area. In this review, the synthesis and ring-opening polymerisation of functional cyclic carbonates that have been reported in the literature in the past decade are discussed. Finally, the post-polymerisation modification methods that have been applied to the resulting homopolymers and copolymers and the application of the materials are also discussed.