Nanomaterials for sustainable remediation: efficient removal of Rhodamine B and lead using greenly synthesized novel mesoporous ZnO@CTAB nanocomposite.

This study explores the dual applications of a greenly synthesized ZnO@CTAB nanocomposite for the efficient remediation of Rhodamine B (RhB) and lead (Pb). The synthesis method involves a sustainable approach, emphasizing environmentally friendly practices. FT-IR, XRD, FESEM, zeta potential, and particle size analyzer (PSA), BET, and UV-VIS were used to physically characterize the zinc oxide and CTAB nanocomposite (ZnO@CTAB). The size and crystalline index of ZnO@CTAB are 77.941 nm and 63.56% respectively. The Zeta potential of ZnO@CTAB is about - 22.4 mV. The pore diameter of the ZnO@CTAB was 3.216 nm, and its total surface area was 97.42 m2/g. The mechanism of adsorption was investigated through pHZPC measurements. The nanocomposite's adsorption performance was systematically investigated through batch adsorption experiments. At pH 2, adsorbent dose of 0.025 g, and temperature 50 °C, ZnO@CTAB removed the most RhB, while at pH 6, adsorbent dose of 0.11 g, and temperature 60 °C, ZnO@CTAB removed the most Pb. With an adsorption efficiency of 214.59 mg/g and 128.86 mg/g for RhB and Pb, the Langmuir isotherm model outperforms the Freundlich isotherm model in terms of adsorption. The pseudo-2nd-order model with an R2 of 0.99 for both RhB and Pb offers a more convincing explanation of adsorption than the pseudo-1st-order model. The results demonstrated rapid adsorption kinetics and high adsorption capacities for RhB and Pb. Furthermore, there was minimal deterioration and a high reusability of ZnO@CTAB till 4 cycles were observed.

Efficient Poly-Adenine-Tailed DNA Functionalization of Gold Nanorods for Tailored Nanostructure Assembly.

Gold nanorods (AuNRs) with unique optical properties play a pivotal role in applications in plasmonic imaging, small molecule detection, and photothermal therapy. However, challenges in DNA functionalization of AuNRs hinder their full potential due to the presence of a dense cetyltrimethylammonium bromide (CTAB) bilayer, impeding close DNA contact. In this study, we introduced a convenient approach for the rapid assembly of polyadenine (polyA) tailed DNA on AuNRs with control of DNA density, rigidity, and valence. We explored the impact of DNA with designed properties on the construction of core-satellite structures by employing AuNRs as cores and spherical gold nanoparticles (AuNSs) as satellites. Density, rigidity, and valence are identified as crucial factors for efficient construction. Specifically, polyA-tailed DNA modulated DNA density and reduced spatial hindrance and electrostatic repulsion, thereby facilitating the construction. Enhancing the rigidity of DNA and incorporating multiple binding sites can further improve the efficiency.

Adsorption behavior and the potential risk of As(V) in soils: exploring the effects of representative surfactants.

Arsenic contamination in soils poses a critical global challenge, yet the influence of surfactants on arsenic adsorption behavior is often underestimated. This study aims to investigate the effects of three representative surfactants, namely cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS), and polyethylene glycol anhydrous sugar alcohol monooleate (Tween 80), on arsenic adsorption behavior in soils. The adsorption isotherm shifts from a single Temkin model without surfactants to both the Langmuir and Temkin models in the presence of surfactants, indicating the simultaneous occurrence of monolayer and multilayer adsorption for arsenic in soils. Moreover, the surfactants can inhibit the adsorption and hasten the attainment of adsorption equilibrium. SDS displayed the most inhibitory effect on arsenic adsorption, followed by Tween 80 and CTAB, due to the competitive adsorption, electrostatic interaction, and hydrophobic interaction. Variations in zeta potential with different surfactants further elucidate this inhibitory phenomenon. Through orthogonal experiment analyses, pH emerges as a primary factor influencing arsenic adsorption in soils, with surfactant concentration and type identified as secondary factors. Temperature notably affects CTAB, with the adsorption inhibition rate plummeting to a mere 0.88% at 50 °C. Sequential extraction analysis revealed that surfactants enhanced the bioavailability of arsenic. The FTIR, XRD, SEM, and CA analyses further support the mechanism underlying the effect of surfactants on arsenic adsorption in soil. These analyses indicate that surfactants modify the composition and abundance of functional groups, hinder the formation of arsenic-containing substances, and improve soil compactness, smoothness, and hydrophilicity. This study provides valuable insights into the effect of surfactants in arsenic-contaminated soils, which is often ignored in previous work.

Exploring the Specific Role of Iron Center in the Catalytic Activity of Human Serum Transferrin: CTAB-Induced Conformational Changes and Sequestration by Mixed Micelles.

Conformational changes play a seminal role in modulating the activity of proteins. This concept becomes all the more relevant in the context of metalloproteins, owing to the formation of specific conformation(s) induced by internal perturbations (like a change in pH, ligand binding, or receptor binding), which may carry out the binding and release of the metal ion/ions from the metal binding center of the protein. Herein, we investigated the conformational changes of an iron-binding protein, monoferric human serum transferrin (Fe-hTF), using several spectroscopic approaches. We could reversibly tune the cetyltrimethylammonium bromide (CTAB)-induced conformation of the protein, exploiting the concept of mixed micelles formed by three sequestrating agents: (3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate) hydrate (CHAPS) and two bile salts, namely, sodium cholate (NaC) and sodium deoxycholate (NaDC). The formation of mixed micelles between CTAB and these reagents (CHAPS/NaC/NaDC) results in the sequestration of CTAB molecules from the protein environment and aids the protein in reattaining its native-like structure. However, the guanidinium hydrochloride-induced denatured Fe-hTF did not acquire its native-like structure using these sequestrating agents, which substantiates the exclusive role of mixed micelles in the present study. Apart from this, we found that the conformation of transferrin (adopted in the presence of CTAB) displays pronounced esterase-like activity toward the para-nitrophenyl acetate (PNPA) substrate as compared to native transferrin. We also outlined the impact of the iron center and amino acids surrounding the iron center on the effective catalytic activity in the CTAB medium. We estimated ∼3 times higher specific catalytic efficiency for the iron-depleted Apo-hTF compared to the fully iron-saturated Fe2-hTF in the presence of CTAB.

Adsorption of an antiseptic in a functionalized fixed-bed: Analysis of breakthrough scenarios and validation of simplistic models defending a novel proposition.

BACKGROUND: Chlorhexidine gluconate (CHG) and cetrimide, which are widely used in various pharmaceutical compositions, are considered potentially hazardous compounds. This combination was largely used during and after Covid 19 pandemic for sanitization. Removal of these two compounds from pharmaceutical waste-water with commercial and functionalized activated carbon in a packed bed column is reported. METHODS: Effects of changes in bed height, flow rate, and initial concentration on the performance of the packed bed are analyzed using Yoon-Nelson, BDST and Thomas models for commercial scale-up operation. The effects of primary design parameters like bed depth and operating parameters like inflow rate and inlet concentration of influent wastewater are studied on the extent of removal of cetrimide and chlorhexidine gluconate. Granular activated carbon (GAC) is functionalized using HF and NH4OH. The extent of enhanced adsorption using the functionalized GAC is demonstrated using breakthrough curves. SIGNIFICANT FINDINGS: K. H. Chu's iconic proposition is validated. Breakthrough time (BT) increases with bed heights and it is less in the case of cetrimide as compared to chlorhexidine gluconate. This shows that cetrimide wins in the competition and occupies the pores much faster than CHG. Mostly, BT-CHG (GAC) < BT-CHG (FAC-HF) < BT-CHG (FAC-NH3) and BT-cetrimide (GAC) < BT-cetrimide (FAC-NH3) < BT-cetrimide (FAC-HF) for a particular bed height. BT-CHG(FAC-HF)BT-cetrimide(FAC-HF)

Oil and Organic Liquids Incorporation into Fresh Geopolymer Pastes Using Suitable Quaternary Ammonium Surfactants.

The direct incorporation of low viscosity organic liquids (OL) such as dodecane and tributylphosphate (TBP) into fresh geopolymers (GP) is difficult and generally leads to variable amounts of un-incorporated OL remaining outside the hardened geopolymer. Experimentally, it is observed that a regular torque increase during OL incorporation corresponds to a suitable dispersion of the OL in the form of fine micrometric droplets. This can be obtained for TBP and dodecane by adding a small quantity of quaternary ammoniums salts (QAs) such as cetyltrimethylammonium bromide (CTAB). Shorter alkyl chains QAs, such as hexamethyltrimethylammonium (HMTA) can also be used but with a reduced efficiency. The positive impact of CTAB is then confirmed by the Washburn capillary rise method, showing that the interactions between TBP and CTAB-modified metakaolin are weaker compared to untreated powder. Finally, it is observed that the incorporation of TBP into geopolymer slurries is much easier than the incorporation of dodecane. The low interfacial tension measured between TBP and the activating solution (around 8 mN·m -1 ), contrasting with dodecane (29 mN·m -1 ), explains that the dispersion of TBP droplets in fresh metakaolin suspensions is more efficient.

Fluorescence correlation spectroscopy in the study of the interaction between hyaluronan and positively charged surfactants.

The interaction between fluorescently labeled hyaluronan and cationic surfactants was studied using Fluorescence Correlation Spectroscopy. The hyaluronan was selected at two different molecular weights - specifically, 274 kDa and 710 kDa. Cetyltrimethylammonium bromide and Septonex® were chosen as cationic surfactants to interact with the negatively charged biopolymer. The study focused on changes in the diffusive behavior of a biopolymer that interacts with surfactant molecules in an aqueous environment. Various methods were applied to evaluate the obtained data, these including, among others, the Maximum Entropy Method, which provides the distributional dependences of diffusion coefficients. Without the surfactant, the studied biopolymers showed diffusion behavior comparable to that found in previously published studies. In the presence of surfactants, more intense interaction was observed between Cetyltrimethylammonium bromide and Septonex®. Comparing the molecular weights, the retention of intermolecular aggregates after the precipitation region for the lower weight and the disintegration of these aggregates for the higher weight were observed; moreover, they showed diffusion behavior comparable to the samples without the presence of the surfactant.

Modified mesoporous silica derived from bamboo leaf using cetyltrimethylammonium bromide and 3-aminopropyl triethoxysilane as CO2 adsorbent in biogas purification.

The calorific value of post-fermentation biogas is a way down below standard and quite low due to the presence of high amount level of carbon dioxide (CO2) biogas mixture. Therefore, it raises the need to process the biogas, separating it from CO2 in order to obtain high-purity biogas as well as to maximize its calorific value. One widely available material that can be used as a sustainable carbon capture adsorbent is silica extracted from bamboo leaves. However, so that silica can act as CO2 adsorber, it is necessary to modify the surface of silica with CTAB and APTES (3-aminopropyl triethoxysilane). In this study, 2-stage method was carried out, namely preparation of mesoporous silica and surface modification using APTES on the mesoporous silica. Experiments in synthesizing APTES-modified silica were obtained by varying its composition: CTAB (1.5-5%w), (HCl 1.5-5 N), and APTES (10-30%). A central composite design (CCD) was employed in exploring the interaction between all variables and also performed for the optimization. Through analysis of variance, it shows that optimum CO2 adsorption capacity reaches 47.02 mg g-1, by applying 4.98% of CTAB, 4.28 N of HCl and 10.08% of APTES. Pseudo-second-order kinetic and Redlich-Peterson isotherm models are more representative to show the adsorption behavior of CO2 into the modified silica. The results show that the modified silica with APTES shows a prospective application of silica for CO2 removal from biogas.

Selective Hydrolysis of Ovalbumin by Zr-Based Lacunary Polyoxotungstate in Surfactant Solutions.

This study aims to design an artificial metalloprotease based on a Zr-containing polyoxometalate Na8[Zr(W5O18)2] [Zr(W5)2] for the hydrolysis of ovalbumin (OVA) in the presence of different surfactants, which can be used in many areas of the biological and medical sciences, particularly for targeted proteolytic drug design. For this reason, parameters, including the free energy of binding, the chemical nature of amino acid residues, secondary structures, and electrostatic potentials, of Zr(W5)2-OVA and Zr(W5)2-OVA-surfactant were analyzed by molecular docking simulations. The investigations showed that the presence of surfactants decreases the binding affinity of Zr(W5)2 for OVA amino acids, and hydrogen bonds and van der Waals interactions are formed between Zr(W5)2 and OVA amino acids. Additionally, GROMACS further illustrated the significance of SDS and CTAB surfactants in influencing the conformational changes of the OVA that lead to selective protein hydrolysis. In agreement with molecular dynamics simulation results, the experimental analysis showed more protein hydrolysis for the Zr(W5)2-OVA-surfactant systems. For instance, circular dichroism spectroscopy indicated that Zr(W5)2-OVA-CTAB and Zr(W5)2-OVA-TX-100 were more hydrolytically efficient due to the increased level of ß-structures rather than α-chains, which showed that surfactants can facilitate the accessibility of Zr(W5)2 to the cleavage sites by inducing partial unfolding of the OVA structure.

CTAB-Co-MOFs@AuPt NPs as signal probes for the electrochemical detection of carcinoembryonic antigen 15-3.

A sensitive electrochemical strategy for carcinoembryonic antigen 15-3 (CA15-3) detection is reported using CTAB-Co-MOFs@AuPt NPs as signal probes. The electrochemical strategy was designed as follows: First, the graphene aerogel@gold nanoparticles (GA@Au NPs) nanocomposites were employed to modify the sensing surface for promoting electron transfer rate and primary antibody (Ab1) immobilization due to GA possesses a large specific surface area, eminent conductivity, and a 3D network structure. Cobalt metal-organic frameworks (CTAB-Co-MOFs) synthesized were then used as a carrier for AuPt NPs and secondary antibody (Ab2) immobilization (notes: labelled-Ab2). With sandwich immunoreaction, the labelled-Ab2 was captured on the surface of the GA@Au NPs nanocomposites. Finally, differential pulse voltammetry (DPV) was employed to register the electrochemical signal of the immunosensor at the potential of - 0.85 V (vs SCE) in phosphate buffer saline (PBS) containing 2.5 mM H2O2. It was verified that the electrochemical reduction signal from Co3+ to Co2+ was recorded. The AuPt NPs could catalyze the reaction of H2O2 oxidizing Co2+ to Co3+, resulting in the amplification of the electrochemical signal. Under the selected conditions, the immunosensor can detect CA15-3 in the range 10 µU/mL to 250 U/mL with a low detection limit of 1.1 µU/mL. In the designed strategy, the CTAB-Co-MOFs were not only employed as carriers for AuPt NPs, but also acted as signal probes. The CTAB-Co-MOFs were investigated including SEM, TEM, XPS, and XRD. The application ability of the immunosensor was evaluated using serum sample, demonstrating the immunosensor can be applied to clinic serum analysis.

Cancer testis antigen burden (CTAB): a novel biomarker of tumor-associated antigens in lung cancer.

BACKGROUND: Cancer-testis antigens (CTAs) are tumor antigens that are normally expressed in the testes but are aberrantly expressed in several cancers. CTA overexpression drives the metastasis and progression of lung cancer, and is associated with poor prognosis. To improve lung cancer diagnosis, prognostic prediction, and drug discovery, robust CTA identification and quantitation is needed. In this study, we examined and quantified the co-expression of CTAs in lung cancer to derive cancer testis antigen burden (CTAB), a novel biomarker of immunotherapy response. METHODS: Formalin fixed paraffin embedded (FFPE) tumor samples in discovery cohort (n = 5250) and immunotherapy and combination therapy treated non-small cell lung cancer (NSCLC) retrospective (n = 250) cohorts were tested by comprehensive genomic and immune profiling (CGIP), including tumor mutational burden (TMB) and the mRNA expression of 17 CTAs. PD-L1 expression was evaluated by IHC. CTA expression was summed to derive the CTAB score. The median CTAB score for the discovery cohort of 170 was applied to the retrospective cohort as cutoff for CTAB "high" and "low". Biomarker and gene expression correlation was measured by Spearman correlation. Kaplan-Meier survival analyses were used to detect overall survival (OS) differences, and objective response rate (ORR) based on RECIST criteria was compared using Fisher's exact test. RESULTS: The CTAs were highly co-expressed (p < 0.05) in the discovery cohort. There was no correlation between CTAB and PD-L1 expression (R = 0.011, p = 0.45) but some correlation with TMB (R = 0.11, p = 9.2 × 10-14). Kaplan-Meier survival analysis of the immunotherapy-treated NSCLC cohort revealed better OS for the pembrolizumab monotherapy treated patients with high CTAB (p = 0.027). The combination group demonstrated improved OS compared to pembrolizumab monotherapy group (p = 0.04). The pembrolizumab monotherapy patients with high CTAB had a greater ORR than the combination therapy group (p = 0.02). CONCLUSIONS: CTA co-expression can be reliably measured using CGIP in solid tumors. As a biomarker, CTAB appears to be independent from PD-L1 expression, suggesting that CTAB represents aspects of tumor immunogenicity not measured by current standard of care testing. Improved OS and ORR for high CTAB NSCLC patients treated with pembrolizumab monotherapy suggests a unique underlying aspect of immune response to these tumor antigens that needs further investigation.

Biochar and surfactant synergistically enhanced PFAS destruction in UV/sulfite system at neutral pH.

The UV/sulfite-based advanced reduction process (ARP) emerges as an effective strategy to combat per- and polyfluoroalkyl substances (PFAS) pollution in water. Yet, the UV/sulfite-ARP typically operates at highly alkaline conditions (e.g., pH > 9 or even higher) since the generated reductive radicals for PFAS degradation can be quickly sequestered by protons (H+). To overcome the associated challenges, we prototyped a biochar-surfactant-system (BSS) to synergistically enhance PFAS sorption and degradation by UV/sulfite-ARP. The degradation and defluorination efficiencies of perfluorooctanoic acid (PFOA) depended on solution pH, and concentrations of surfactant (cetyltrimethylammonium bromide; CTAB), sulfite, and biochar. At high pH (8-10), adding biochar and BSS showed no or even small inhibitory effect on PFOA degradation, since the degradation efficiencies were already high enough that cannot be differentiated. However, at acidic and neutral pH (6-7), an evident enhancement of PFOA degradation and defluorination efficiencies occurred. This is due to the synergies between biochar and CTAB that create favorable microenvironments for enhanced PFOA sorption and deeper destruction by prolonging the longevity of reductive radicals (e.g., SO3•-), which is less affected by ambient pH conditions. The performance of UV/sulfite/BSS was further optimized and used for the degradation of four PFAS. At the optimal experimental condition, the UV/sulfite/BSS system can completely degrade PFOA with >30% defluorination efficiency for up to five continuous cycles (n = 5). Overall, our BSS provides a cost-effective and sustainable technique to effectively degrade PFAS in water under environmentally relevant pH conditions. The BSS-enabled ARP technique can be easily tied into PFAS treatment train technology (e.g., advanced oxidation process) for more efficient and deeper defluorination of various PFAS in water.

Adsorption features of reduced aminated supports modified with glutaraldehyde: Understanding the heterofunctional features of these supports.

Immobilization of enzymes on aminated supports using the glutaraldehyde chemistry may involve three different interactions, cationic, hydrophobic, and covalent interactions. To try to understand the impact this heterofunctionality, we study the physical adsorption of the beta-galactosidase from Aspergillus niger, on aminated supports (MANAE) and aminated supports with one (MANAE-GLU) or two molecules of glutaraldehyde (MANAE-GLU-GLU). To eliminate the chemical reactivity of the glutaraldehyde, the supports were reduced using sodium borohydride. After enzyme adsorption, the release of the enzyme from the supports using different NaCl concentrations, Triton X100, ionic detergents (SDS and CTAB), or different temperatures (4 °C to 55 °C) was studied. Using MANAE support, at 0.3 M NaCl almost all the immobilized enzyme was released. Using MANAE-GLU, 0.3 M, and 0.6 M NaCl similar results were obtained. However, incubation at 1 M or 2 M NaCl, many enzyme molecules were not released from the support. For the MANAE-GLU-GLU support, none of the tested concentrations of NaCl was sufficient to release all enzyme bound to the support. Only using high temperatures, 0.6 M NaCl, and 1 % CTAB or SDS, could the totality of the proteins be released from the support. The results shown in this paper confirm the heterofunctional character of aminated supports modified with glutaraldehyde.

Allergic or Not: Final Interpretation of Doubtful Patch Test Reactions From the North American Contact Dermatitis Group, 2019-2020.

Background: Doubtful patch test reactions generally do not meet criterion for positivity in patch testing. However, the North American Contact Dermatitis Group (NACDG) allows for doubtful reactions to be coded with a final determination of "allergic/positive" based on the temporal pattern, appearance, known characteristics of the allergen, and/or other supportive patch test reactions. Objectives: To analyze NACDG data from the 2019-2020 patch test cycle to identify patterns in the interpretation and relevance of doubtful reactions. Methods: The frequency and proportions of doubtful reactions were tabulated and analyzed for patterns. Statistical analyses were limited to allergens with ≥30 doubtful reactions to ensure adequate sample size. Results: Of patch-tested patients, 31.9% (1315/4121) had ≥1 doubtful reaction. Of 2538 total doubtful reactions, 46% (n = 1167) had a final interpretation of "allergic/positive." The allergens with the highest proportion of doubtful reactions at the final visit were hydroperoxides of linalool 1% (4.5%), fragrance mix I 8.0% (3.9%), and cetrimonium chloride 0.5% (3.4%). Methylchloroisothiazolinone/methylisothiazolinone (MCI/MI) 0.02% (P < 0.001), MI 0.2% (P < 0.001), nickel sulfate hexahydrate 2.5% (P = 0.001), and neomycin sulfate 20.0% (P = 0.003) doubtful reactions were more likely to be interpreted as allergic than nonallergic. Methyldibromoglutaronitrile/phenoxyethanol 0.2% (P < 0.001), oleamidopropyl dimethylamine 0.1% (P < 0.001), formaldehyde 2.0% (P < 0.001), cetrimonium chloride 0.5% (P < 0.001), benzophenone-4 (sulisobenzone) 10% (P < 0.001), iodopropynyl butylcarbamate 0.5% (P < 0.001), cocamidopropyl betaine 1.0% (P = 0.002), and benzisothiazolinone 0.1% (P = 0.012) doubtful reactions were less likely to be interpreted as allergic. Of the 1167 doubtful reactions interpreted as allergic, 84.9% had current relevance. Conclusions: Doubtful reactions were common and approximately one half were coded with a final interpretation of "allergic/positive." Of those, most were clinically relevant. MCI/MI, MI, nickel, and neomycin were more likely to be interpreted as allergic.

Label-free, liquid crystal-based aptasensor for detecting carbendazim at picomolar levels.

We describe a simple and sensitive liquid-crystal (LC)-based method for quantifying carbendazim (CBZ) by exploiting aptamer-specific recognition at the aqueous-LC interface. The method relies on the interfacial interaction between an aptamer and cetyltrimethylammonium bromide (CTAB); this interaction varies depending on the amount of CBZ. In the absence of CBZ, the aptamer disrupts the CTAB monolayer through electrostatic attraction, leading to a transition from homeotropic to tilted ordering of the LCs. As CBZ concentrations rise, the formation of aptamer-CBZ complexes increases, preserving the vertical alignment of the LCs by reducing collapse of the CTAB layer caused by electrostatic interactions. Using these methods, we achieved a CBZ detection limit of 3.12 pM (0.000597 µg/L) over a linear range of 0.05-5 nM. Moreover, we quantified CBZ levels in peach, soil, and tap water samples. Our LC-based detection method has significant research potential, offering sensitive, and straightforward detection of CBZ.

Decoding the conformational binding of drug mixtures on ovalbumin: An integrated multimodal network.

This research addresses the crucial necessity for a deeper understanding of the binding interactions between surfactants and proteins, with a specific focus on ovalbumin. Considering ovalbumin's role in diverse biochemical processes, it remains a subject of significant interest for drug discovery and design. To fill existing knowledge gaps, we investigated the binding interaction between dicloxacillin and cetyltrimethylammonium bromide (CTAB) on ovalbumin, employing a comprehensive approach that combines computational modeling with experimental validations. Using the ezPocket tool, the computational phase predicted ten relevant binding sites on ovalbumin's surface. The isobologram combination index (CI) heatmap strongly suggested a complex interplay of antagonistic and synergistic effects. Besides, a conformational drug-drug interaction network was proposed to explore the stability of the surfactant mixture within specific binding sites of ovalbumin, revealing a dynamic landscape of suggested antagonist effects. Experimental validations through UV-vis, Fluorescence, and circular dichroism (CD) spectroscopy further corroborated the computational findings, confirming the formation of stable complexes. Finally, this study not only advances our comprehension of ovalbumin's interactions with surfactants but also offers a multidimensional perspective and an advanced methodological framework for efficient therapeutic strategies, opening new avenues for future applications in drug development and applied biochemistry.

Wearable Magnetoelectric Stimulation for Chronic Wound Healing by Electrospun CoFe2O4@CTAB/PVDF Dressings.

Magnetoelectric stimulation is a promising therapy for various disorders due to its high efficacy and safety. To explore its potential in chronic skin wound treatment, we developed a magnetoelectric dressing, CFO@CTAB/PVDF (CCP), by electrospinning cetyltrimethylammonium bromide-modified CoFe2O4 (CFO) particles with polyvinylidene fluoride. Cetyltrimethylammonium bromide (CTAB) serves as a dispersion surfactant for CFO, with its quaternary ammonium cations imparting antibacterial and hydrophilic properties to the dressing. Electrospinning polarizes polyvinylidene fluoride (PVDF) molecules and forms a fibrous membrane with flexibility and breathability. With a wearable electromagnetic induction device, a dynamic magnetic field is established to induce magnetostrictive deformation of CFO nanoparticles. Consequently, a piezoelectric potential is generated on the surface of PVDF nanofibers to enhance the endogenous electrical field in the wound, achieving a cascade coupling of electric-magnetic-mechanical-electric effects. Bacteria and cell cultures show that 2% CTAB effectively balances antibacterial property and fibroblast activity. Under dynamic magnetoelectric stimulation, the CCP dressing demonstrates significant upregulation of TGF-ß, FGF, and VEGF, promoting L929 cell adhesion and proliferation. Moreover, it facilitates the healing of diabetic rat skin wounds infected with Staphylococcus aureus within 2 weeks. Histological and molecular biology evaluations confirm the anti-inflammatory effect of CTAB and the accelerated formation of collagen and vessel by electrical stimulation. This work provides insights into the application of magnetoelectric stimulation in the healing of chronic wounds.

Self-Assembled FeIII-TAML-Based Magnetic Nanostructures for Rapid and Sustainable Destruction of Bisphenol A.

This study focused on constructing iron(III)-tetraamidomacrocyclic ligand (FeIII-TAML)-based magnetic nanostructures via a surfactant-assisted self-assembly (SAS) method to enhance the reactivity and recoverability of FeIII-TAML activators, which have been widely employed to degrade various organic contaminants. We have fabricated FeIII-TAML-based magnetic nanomaterials (FeIII-TAML/CTAB@Fe3O4, CTAB refers to cetyltrimethylammonium bromide) by adding a mixed solution of FeIII-TAML and NH3·H2O into another mixture containing CTAB, FeCl2 and FeCl3 solutions. The as-prepared FeIII-TAML/CTAB@Fe3O4 nanocomposite showed relative reactivity compared with free FeIII-TAML as indicated by decomposition of bisphenol A (BPA). Moreover, our results demonstrated that the FeIII-TAML/CTAB@Fe3O4 composite can be separated directly from reaction solutions by magnet adsorption and reused for at least four times. Therefore, the efficiency and recyclability of self-assembled FeIII-TAML/CTAB@Fe3O4 nanostructures will enable the application of FeIII-TAML-based materials with a lowered expense for environmental implication.

Innovative approaches to suppress non-specific adsorption in molecularly imprinted polymers for sensing applications.

Molecularly imprinted polymers (MIPs) are synthetic antibodies developed to bind selectively with specific molecules. They function through a particular recognition process involving their cavities and functional groups. Nevertheless, functional groups located outside these cavities are the main cause of non-specific molecule binding, thus reducing the effectiveness of MIPs in sensing applications. This work focused on enhancing the selectivity and performance of MIPs through electrostatic modification with surfactants. The study investigates the use of two surfactants, namely sodium dodecyl sulfate (SDS) and cetyl trimethyl ammonium bromide (CTAB), to eliminate non-specific adsorption in MIPs. The binding isotherms of the target molecule sulfamethoxazole (SMX) on MIPs and non-imprinted polymers (NIPs) were analyzed, showing higher adsorption capacity of MIPs due to the specific cavities. The modification with SDS or CTAB effectively eliminated non-specific adsorption in MIPs. The kinetic adsorption behavior further demonstrated the efficacy of MIP+--SDS/CTAB in the selective adsorption of SMX. Calibration curves showcase the methodology's analytical capabilities, achieving low limit of detection for SMX 6 ng mL-1 using MIP +-SDS. The stability study confirmed that the developed MIP +/--SDS/CTAB remains stable even at high temperatures, demonstrating its suitability for on-site applications. The methodology was successfully applied to detect SMX in milk and water samples, achieving promising recoveries. Overall, the electrostatic modification of MIPs with surfactants emerges as a valuable strategy for enhancing selectivity and performance in target molecule recognition and detection.

Preparation of cationic surfactant modified two-dimensional (2D) multi-layered Ti3C2Tx MXene for methyl orange removal from aqueous solution: Kinetic, equilibrium, and adsorption mechanisms.

In this study, cetyltrimethylammonium bromide-modified multi-layered Ti3C2Tx MXene (CMM) was produced using a Ti3AlC2 precursor, and its capacity to remove the anionic dye, methyl orange (MO), was investigated in detail. An electrostatic combination between negatively charged Ti3C2Tx nanosheets and cationic surfactant solution (CTAB) produced this adsorbent. This triggered an exposure of the accessible active sites to further boost adsorption effectiveness by increasing the distance between the MXene nanosheets. Prepared adsorbents were characterized using some analytical techniques, including TGA, FESEM, EDX, FTIR, XRD, and N2 adsorption-desorption. Furthermore, some influencing parameters such as contact time, solution of pH, loading adsorbent, and initial dye concentration were evaluated, with findings showing that MO could adsorb CMM to its maximum capacity at an adsorbent dosage of 0.83 g/L, a contact time of 90 min, and a solution pH of 3. Adsorption results were found to be highly linked with both Langmuir isotherm (R2 = 0.9990) and the pseudo-second-order kinetic model (R2 = 0.9924). The maximum adsorption capacity of MO was obtained at approximately 213.00 mg/g. Also, hydrogen bonding, π-cation interactions, and electrostatic adsorption can all be implicated in the mechanism of MO adsorption on CMM. The fabricated CMM is presented as a prospective adsorbent for the removal of dyes from polluted water, demonstrating robust recyclability for up to the fifth iteration. All these outstanding properties indicate that cetyltrimethylammonium bromide-modified multi-layered Ti3C2Tx MXene can be considered as applicable adsorbents for textile pollutants.