[Effects of cell division protein-encoding genes knockout on solvent formation and cell morphology in Clostridium acetobutylicum].

Clostridium acetobutylicum is an important strain for bio-butanol formation. In recent years, gene-editing technology is widely used for developing the hyper-butanol-production strains. In this study, three genes (cac1251, cac2118 and cac2125) encoding cell division proteins (RodA, DivIVA and DivIB) in C. acetobutylicum were knocked out. The cac2118-knockout strain had changed its cell morphology to spherical-shape during the solventogenesis, and obtained a higher butanol yield of 0.19 g/g, increasing by 5.5%, compared with the wild type strain. The glucose utilization and butanol production of cac1251-knockout strain decreased by 33.9% and 56.3%, compared the with wild type strain, reaching to 47.3 g/L and 5.6 g/L. The cac1251-knockout strain and cac2125-knockout strain exhibited poor cell growth with cell optical density decreased by 40.4% and 38.3%, respectively, compared with that of the wild type strain. The results indicate that cell division protein DivIVA made the differences in the regulation of cell morphology and size. Cell division proteins RodA and DivIB played significant roles in the regulation of cell division, and affected cell growth, as well as solventogenesis metabolism.

Using poly(vinyldodecylimidazolium bromide) for the in-situ product recovery of n-butanol.

The mitigation of end-product inhibition during the biosynthesis of n-butanol is demonstrated for an in-situ product recovery (ISPR) system employing a poly(ionic liquid) (PIL) absorbent. The thermodynamic affinity of poly(vinyldodecylimidazolium bromide) [P(VC12 ImBr)] for n-butanol, acetone and ethanol versus water was measured at conditions experienced in a typical acetone-ethanol-butanol (ABE) fermentation. In addition to providing a high n-butanol partition coefficient (PC = 6.5) and selectivity (αBuOH/water = 46), P(VC12 ImBr) is shown to be biocompatible with Saccharomyces cerevisiae and Clostridium acetobutylicum. Furthermore, the diffusivity of n-butanol in a hydrated PIL provides absorption rates that support ISPR applications. Using a 5 wt% PIL phase fraction relative to the aqueous phase mass, P(VC12 ImBr) improved the volumetric productivity of a batch ABE ISPR process by 31% relative to a control fermentation. The concentration of n-butanol in the P(VC12 ImBr) phase was sufficient to increase the alcohol concentration from 1.5 wt% in the fermentation medium to 25 wt% in the saturated PIL, thereby facilitating downstream n-butanol recovery.

Intracellular metabolic changes of Clostridium acetobutylicum and promotion to butanol tolerance during biobutanol fermentation.

During the fermentation process, Clostridium acetobutylicum cells are often inhibited by the accumulated butanol. However, the mechanism underlying response of C. acetobutylicum to butanol stress remains poorly understood. This study was performed to clarify such mechanism through investigating the butanol stress-associated intracellular biochemical changes at acidogenesis phase (i.e., middle exponential phase) and solventogenesis phase (i.e., early stationary phase) by a gas chromatography-mass spectrometry-based metabolomics strategy. With the aid of partial least-squares-discriminant analysis, a pairwise discrimination between control group and butanol-treated groups was revealed, and 27 metabolites with variable importance in the projection value greater than 1 were identified. Under butanol stress, the glycolysis might be inhibited while TCA cycle might be promoted. Moreover, changes of lipids and fatty acids compositions, amino acid metabolism and osmoregulator concentrations might be the key factors involved in C. acetobutylicum metabolic response to butanol stress. It was suggested that C. acetobutylicum cells might change the levels of long acyl chain saturated fatty acids and branched-chain amino acids to maintain the integrity of cell membrane through adjusting membrane fluidity under butanol stress. The increased level of glycerol was considered to be correlated with osmoregulation and regulating redox balance. In addition, increased levels of some amino acids (i.e., threonine, glycine, alanine, phenylalanine, tyrosine, tryptophan, aspartate and glutamate) might also confer butanol tolerance to C. acetobutylicum. These results highlighted our knowledge about the response or adaptation of C. acetobutylicum to butanol stress, and would contribute to the construction of feasible butanologenic strains with higher butanol tolerance.

Integrated intracellular metabolic profiling and pathway analysis approaches reveal complex metabolic regulation by Clostridium acetobutylicum.

BACKGROUND: Clostridium acetobutylicum is one of the most important butanol producing strains. However, environmental stress in the fermentation process usually leads to a lower yield, seriously hampering its industrialization. In order to systematically investigate the key intracellular metabolites that influence the strain growth and butanol production, and find out the critical regulation nodes, an integrated analysis approach has been carried out in this study. RESULTS: Based on the gas chromatography-mass spectrometry technology, the partial least square discriminant analysis and the pathway analysis, 40 metabolic pathways linked with 43 key metabolic nodes were identified. In-depth analysis showed that lots of amino acids metabolism promoted cell growth but exerted slight influence on butanol production, while sugar metabolism was favorable for cell growth but unfavorable for butanol synthesis. Besides, both lysine and succinic acid metabolism generated a complex effect on the whole metabolic network. Dicarboxylate metabolism exerted an indispensable role on cell growth and butanol production. Subsequently, rational feeding strategies were proposed to verify these conclusions and facilitate the butanol biosynthesis. Feeding amino acids, especially glycine and serine, could obviously improve cell growth while yeast extract, citric acid and ethylene glycol could significantly enhance both growth and butanol production. CONCLUSIONS: The feeding experiment confirmed that metabolic profiling combined with pathway analysis provided an accurate, reasonable and practical approach to explore the cellular metabolic activity and supplied a basis for improving butanol production. These strategies can also be extended for the production of other important bio-chemical compounds.

Cell growth behaviors of Clostridium acetobutylicum in a pervaporation membrane bioreactor for butanol fermentation.

Acetone-butanol-ethanol fermentation using Clostridium acetobutylicum was studied in the continuous and closed-circulating fermentation (CCCF) system. The experiment lasting for 192 H was carried out by integrating fermentation with in situ pervaporation. In the entire process, the cell growth profile took place in the following two phases: the logarithmic phase during early 28 H and the linear phase from 130 to 150 H. This was a unique characteristic compared with the curve of traditional fermentation, and the fitting equations of two growth phases were obtained by Origin software according to the kinetic model of cell growth. Besides, the kinetic parameters that include the butanol yield, maximum specific growth rate, average specific formation rate, and volumetric productivity of butanol were measured as 0.19 g g(-1) , 0.345 H(-1) , 0.134 H(-1) and 0.23 g L(-1)  H(-1) , respectively. The C. acetobutylicum in the CCCF system showed good adaptability and fermentation performance, and the prolonged fermentation period and high production were also the main advantages of CCCF technology.

Comparative transcriptomic analysis of Clostridium acetobutylicum biofilm and planktonic cells.

Biofilm-based immobilization of solventogenic Clostridia has been extensively exploited to overcome traditional bottlenecks in biobutanol production like solvent toxicity and low productivities. However, the molecular basis of solventogenic Clostridia biofilm is rarely explored. Here, for the first time, we report DNA array-based study of Clostridium acetobutylicum biofilm cells to elucidate the transcriptional modulation. Results showed that 16.2% of the C. acetobutylicum genome genes within the biofilm cells were differentially expressed, with most genes being up-regulated. The most dramatic changes occurred with amino acid biosynthesis, with sulfur uptake and cysteine biosynthesis being the most up-regulated and histidine biosynthesis being the most down-regulated in the biofilm cells. It was demonstrated that C. acetobutylicum biofilm cells increased metabolic activities probably by up-regulating iron and sulfur uptake and Fe-S cluster biosynthesis genes as well as glycolysis genes. Furthermore, genes involved in sporulation, granulose formation, extracellular polymer degradation, pentose catabolisms, and various other processes were also notably regulated, indicating that the biofilm mode of growth rendered the cells a distinct phenotype. This study provides valuable insights into the transcriptional regulation in C. acetobutylicum biofilm cells and should be highly useful for understanding and developing the biofilm-based processes.

Microencapsulation of Clostridium acetobutylicum ATCC 824 spores in gellan gum microspheres for the production of biobutanol.

The purpose of the present study was to provide further insights on the applicability of microencapsulation using emulsification method, to immobilise Clostridium acetobutylicum ATCC 824 spores, for biobutanol production. The encapsulated spores were revived using heat shock treatment and the fermentation efficiency of the resultant encapsulated cells was compared with that of the free (non-encapsulated) cells. The microspheres were easily recovered from the fermentation medium by filtration and reused up to five cycles of fermentation. In contrast, the free (non-encapsulated) cells could be reused for two cycles only. The microspheres remained intact throughout repeated use. Although significant cell leakage was observed during the course of fermentation, the microspheres could be reused with relatively high butanol yield, demonstrating their role as microbial cell nurseries. Both encapsulated and liberated cells contributed to butanol production.

Assessment of morphological changes of Clostridium acetobutylicum by flow cytometry during acetone/butanol/ethanol extractive fermentation.

Acetone/butanol/ethanol (ABE) fermentation by Clostridium acetobutylicum was investigated in extractive fed-batch experiments. In conventional fermentations, metabolic activity ceases when a critical threshold products concentration is reached (~21.6 g solvents l(-1)). Solvents production was increased up to 36.6 and 37.2 g l(-1), respectively, using 2-butyl-1-octanol (aqueous to organic ratio: 1:0.25 v/v) and pomace olive oil (1:1 v/v) as extraction solvents. The morphological changes of different cell types were monitored and quantified using flow cytometry. Butanol production in extractive fermentations with pomace olive oil was achieved mainly by vegetative cells, whereas the percentage of sporulating cells was lower than 10%.

Butanol production by immobilised Clostridium acetobutylicum in repeated batch, fed-batch, and continuous modes of fermentation.

Clostridium acetobutylicum immobilised in polyvinylalcohol, lens-shaped hydrogel capsules (LentiKats(®)) was studied for production of butanol and other products of acetone-butanol-ethanol fermentation. After optimising the immobilisation protocol for anaerobic bacteria, continuous, repeated batch, and fed-batch fermentations in repeated batch mode were performed. Using glucose as a substrate, butanol productivity of 0.41 g/L/h and solvent productivity of 0.63 g/L/h were observed at a dilution rate of 0.05 h(-1) during continuous fermentation with a concentrated substrate (60 g/L). Through the process of repeated batch fermentation, the duration of fermentation was reduced from 27.8h (free-cell fermentation) to 3.3h (immobilised cells) with a solvent productivity of 0.77 g/L/h (butanol 0.57 g/L/h). The highest butanol and solvent productivities of 1.21 and 1.91 g/L/h were observed during fed-batch fermentation operated in repeated batch mode with yields of butanol (0.15 g/g) and solvents (0.24 g/g), respectively, produced per gram of glucose.

Feasibility study on microencapsulation of anaerobic Clostridium acetobutylicum ATCC 824 by emulsification method for application in biobutanol production.

This work evaluated the feasibility of microencapsulating Clostridium acetobutylicum ATCC 824 cells by emulsification for fermentation to produce biobutanol. The effects of selected emulsification process on viability of the vegetative cells and spores were investigated to enable the selection of appropriate form of bacterium for immobilisation. The spores were found to be more suitable for microencapsulation than the vegetative cells. Design of experiment and mathematical models were then used to evaluate the effects of gellan gum concentration, HLB of surfactant blend, temperature and stirring speed on the properties of the microspheres produced. Using the predicted optimal conditions, the spores were successfully immobilised in spherical microspheres for use in fermentation. The microencapsulated spores were easily revived by heat shock treatment and could produce 8.2 g/l of butanol, which was higher than that generally reported in literature. The microencapsulation method developed provides means of producing reusable microbioreactors for anaerobic spore-forming microorganisms.

σK of Clostridium acetobutylicum is the first known sporulation-specific sigma factor with two developmentally separated roles, one early and one late in sporulation.

Sporulation in the model endospore-forming organism Bacillus subtilis proceeds via the sequential and stage-specific activation of the sporulation-specific sigma factors, σ(H) (early), σ(F), σ(E), σ(G), and σ(K) (late). Here we show that the Clostridium acetobutylicum σ(K) acts both early, prior to Spo0A expression, and late, past σ(G) activation, thus departing from the B. subtilis model. The C. acetobutylicum sigK deletion (ΔsigK) mutant was unable to sporulate, and solventogenesis, the characteristic stationary-phase phenomenon for this organism, was severely diminished. Transmission electron microscopy demonstrated that the ΔsigK mutant does not develop an asymmetric septum and produces no granulose. Complementation of sigK restored sporulation and solventogenesis to wild-type levels. Spo0A and σ(G) proteins were not detectable by Western analysis, while σ(F) protein levels were significantly reduced in the ΔsigK mutant. spo0A, sigF, sigE, sigG, spoIIE, and adhE1 transcript levels were all downregulated in the ΔsigK mutant, while those of the sigH transcript were unaffected during the exponential and transitional phases of culture. These data show that σ(K) is necessary for sporulation prior to spo0A expression. Plasmid-based expression of spo0A in the ΔsigK mutant from a nonnative promoter restored solventogenesis and the production of Spo0A, σ(F), σ(E), and σ(G), but not sporulation, which was blocked past the σ(G) stage of development, thus demonstrating that σ(K) is also necessary in late sporulation. sigK is expressed very early at low levels in exponential phase but is strongly upregulated during the middle to late stationary phase. This is the first sporulation-specific sigma factor shown to have two developmentally separated roles.

Dual substrate strategy to enhance butanol production using high cell inoculum and its efficient recovery by pervaporation.

The present study deals with the development of an efficient ABE fermentation process using mixed substrate strategy for butanol production wherein no acetone was produced. For this, glucose was supplemented in the medium containing glycerol as main substrate which leads to a higher butanol production of 17.75 g/L in 72 h by Clostridium acetobutylicum KF158795. Moreover, the high cell inoculum also resulted in an increased ABE productivity of 0.46 g/L/h. Further, industrial scalability of the process was also successfully validated in a 300 L fermenter. Furthermore, potential of the Polymeric (PolyRMem) and Zeolite (ZeoMem) membranes for separation of butanol from fermentation broth was also studied by testing the pervaporation performance through which the butanol was successfully recovered.

Developing controllable hypermutable Clostridium cells through manipulating its methyl-directed mismatch repair system.

Development of controllable hypermutable cells can greatly benefit understanding and harnessing microbial evolution. However, there have not been any similar systems developed for Clostridium, an important bacterial genus. Here we report a novel two-step strategy for developing controllable hypermutable cells of Clostridium acetobutylicum, an important and representative industrial strain. Firstly, the mutS/L operon essential for methyldirected mismatch repair (MMR) activity was inactivated from the genome of C. acetobutylicum to generate hypermutable cells with over 250-fold increased mutation rates. Secondly, a proofreading control system carrying an inducibly expressed mutS/L operon was constructed. The hypermutable cells and the proofreading control system were integrated to form a controllable hypermutable system SMBMutC, of which the mutation rates can be regulated by the concentration of anhydrotetracycline (aTc). Duplication of the miniPthl-tetR module of the proofreading control system further significantly expanded the regulatory space of the mutation rates, demonstrating hypermutable Clostridium cells with controllable mutation rates are generated. The developed C. acetobutylicum strain SMBMutC2 showed higher survival capacities than the control strain facing butanol-stress, indicating greatly increased evolvability and adaptability of the controllable hypermutable cells under environmental challenges.

The two stage immobilized column reactor with an integrated solvent recovery module for enhanced ABE production.

The production of acetone, butanol, and ethanol (ABE) by fermentation is a process that had been used by industries for decades. Two stage immobilized column reactor system integrated with liquid-liquid extraction was used with immobilized Clostridium acetobutylicum DSM 792, to enhance the ABE productivity and yield. The sugar mixture (glucose, mannose, galactose, arabinose, and xylose) representative to the lignocellulose hydrolysates was used as a substrate for continuous ABE production. Maximum total ABE solvent concentration of 20.30 g L(-1) was achieved at a dilution rate (D) of 0.2h(-1), with the sugar mixture as a substrate. The maximum solvent productivity (10.85 g L(-1)h(-1)) and the solvent yield (0.38 g g(-1)) were obtained at a dilution rate of 1.0 h(-1). The maximum sugar mixture utilization rate was achieved with the present set up which is difficult to reach in a single stage chemostat. The system was operated for 48 days without any technical problems.

Repetitive domestication to enhance butanol tolerance and production in Clostridium acetobutylicum through artificial simulation of bio-evolution.

To improve butanol tolerance and production in Clostridium acetobutylicum, a novel approach was developed in this study, which was called artificial simulation of bio-evolution (ASBE) based on the evolutionary dynamics and natural selection. Through repetitive evolutionary domestications, a butanol-tolerant strain C. acetobutylicum T64 was obtained, which could withstand 4% (v/v) (compared to 2% of the wild-type) butanol and was accompanied by the increase of butanol production from 12.2g/L to 15.3g/L using corn meal as substrate. Fermentation was also carried out to investigate the relationship between butanol tolerance and ABE production, suggesting that enhancing butanol tolerance could increase butanol production but unlikely improve total ABE production. These results also indicated that the ASBE would be an available and feasible method used in biotechnology for enhancement of butanol tolerance and production.

Resonance assignments of cohesin and dockerin domains from Clostridium acetobutylicum ATCC824.

Cohesin and dockerin domains are critical assembling components of cellulosome, a large extracellular multienzyme complex which is used by anaerobic cellulolytic bacteria to efficiently degrade lignocellulose. According to sequence homology, cohesins can be divided into three major groups, whereas cohesins from Clostridium acetobutylicum are beyond these groups and emanate from a branching point between the type I and type III cohesins. Cohesins and dockerins from C. acetobutylicum show low sequence homology to those from other cellulolytic bacteria, and their interactions are specific in corresponding species. Therefore the interactions between cohesins and dockerins from C. acetobutylicum are meaningful to the studies of both cellulosome assembling mechanism and the construction of designer cellulosome. Here we report the NMR resonance assignments of one cohesin from cellulosome scaffoldin cipA and one dockerin from a cellulosomal glycoside hydrolase (family 9) of C. acetobutylicum for further structural determination and functional studies.

A transcriptional study of acidogenic chemostat cells of Clostridium acetobutylicum--cellular behavior in adaptation to n-butanol.

To gain more insight into the butanol stress response of Clostridium acetobutylicum the transcriptional response of a steady state acidogenic culture to different levels of n-butanol (0.25-1%) was investigated. No effect was observed on the fermentation pattern and expression of typical solvent genes (aad, ctfA/B, adc, bdhA/B, ptb, buk). Elevated levels of butanol mainly affected class I heat-shock genes (hrcA, grpE, dnaK, dnaJ, groES, groEL, hsp90), which were upregulated in a dose- and time-dependent manner, and genes encoding proteins involved in the membrane composition (fab and fad or glycerophospholipid related genes) and various ABC-transporters of unknown specificity. Interestingly, fab and fad genes were embedded in a large, entirely repressed cluster (CAC1988-CAC2019), which inter alia encoded an iron-specific ABC-transporter and molybdenum-cofactor synthesis proteins. Of the glycerophospholipid metabolism, the glycerol-3-phosphate dehydrogenase (glpA) gene was highly upregulated, whereas a glycerophosphodiester ABC-transporter (ugpAEBC) and a phosphodiesterase (ugpC) were repressed. On the megaplasmid, only a few genes showed differential expression, e.g. a rare lipoprotein (CAP0058, repressed) and a membrane protein (CAP0102, upregulated) gene. Observed transcriptional responses suggest that C. acetobutylicum reacts to butanol stress by induction of the general stress response and changing its cell envelope and transporter composition, but leaving the central catabolism unaffected.

A transcriptional study of acidogenic chemostat cells of Clostridium acetobutylicum--solvent stress caused by a transient n-butanol pulse.

The main product of the anaerobic fermentative bacterium Clostridium acetobutylicum is n-butanol, an organic solvent with severe toxic effects on the cells. Therefore, the identification of the molecular factors related to n-butanol stress constitutes a major strategy for furthering the understanding of the biotechnological production of n-butanol, an important industrial biofuel. Previous reports concerning n-butanol stress in C. acetobutylicum dealt exclusively with batch cultures. In this study, for the first time a comprehensive transcriptional analysis of n-butanol-stressed C. acetobutylicum was conducted using stable steady state acidogenic chemostat cultures. A total of 358 differentially expressed genes were significantly affected by n-butanol stress. Similarities, such as the upregulation of general stress genes, and differences in gene expression were compared in detail with earlier DNA microarrays performed in batch cultivation experiments. The main result of this analysis was the observation that genes involved in amino acid and nucleotide biosynthesis, as well as genes for specific transport systems were upregulated by n-butanol. Our results exclude any transcriptional response triggered by exogenous pH changes or solventogenic n-butanol formation. Finally, our data suggest that metabolic flux through the glycerolipid biosynthetic pathway increases, confirming that C. acetobutylicum modifies the cytoplasmic membrane composition in response to n-butanol stress.

Development and application of flow-cytometric techniques for analyzing and sorting endospore-forming clostridia.

The study of microbial heterogeneity at the single-cell level is a rapidly growing area of research in microbiology and biotechnology due to its significance in pathogenesis, environmental biology, and industrial biotechnologies. However, the tools available for efficiently and precisely probing such heterogeneity are limited for most bacteria. Here we describe the development and application of flow-cytometric (FC) and fluorescence-assisted cell-sorting techniques for the study of endospore-forming bacteria. We show that by combining FC light scattering (LS) with nucleic acid staining, we can discriminate, quantify, and enrich all sporulation-associated morphologies exhibited by the endospore-forming anaerobe Clostridium acetobutylicum. Using FC LS analysis, we quantitatively show that clostridial cultures commonly perform multiple rounds of sporulation and that sporulation is induced earlier by the overexpression of Spo0A, the master regulator of endospore formers. To further demonstrate the power of our approach, we employed FC LS analysis to generate compelling evidence to challenge the long-accepted view in the field that the clostridial cell form is the solvent-forming phenotype.

The transcriptional program underlying the physiology of clostridial sporulation.

BACKGROUND: Clostridia are ancient soil organisms of major importance to human and animal health and physiology, cellulose degradation, and the production of biofuels from renewable resources. Elucidation of their sporulation program is critical for understanding important clostridial programs pertaining to their physiology and their industrial or environmental applications. RESULTS: Using a sensitive DNA-microarray platform and 25 sampling timepoints, we reveal the genome-scale transcriptional basis of the Clostridium acetobutylicum sporulation program carried deep into stationary phase. A significant fraction of the genes displayed temporal expression in six distinct clusters of expression, which were analyzed with assistance from ontological classifications in order to illuminate all known physiological observations and differentiation stages of this industrial organism. The dynamic orchestration of all known sporulation sigma factors was investigated, whereby in addition to their transcriptional profiles, both in terms of intensity and differential expression, their activity was assessed by the average transcriptional patterns of putative canonical genes of their regulon. All sigma factors of unknown function were investigated by combining transcriptional data with predicted promoter binding motifs and antisense-RNA downregulation to provide a preliminary assessment of their roles in sporulation. Downregulation of two of these sigma factors, CAC1766 and CAP0167, affected the developmental process of sporulation and are apparently novel sporulation-related sigma factors. CONCLUSION: This is the first detailed roadmap of clostridial sporulation, the most detailed transcriptional study ever reported for a strict anaerobe and endospore former, and the first reported holistic effort to illuminate cellular physiology and differentiation of a lesser known organism.