Discovery of Guanidine Derivatives from Buthus martensii Karsch with Metal-Binding and Cholinesterase Inhibition Properties.

Two rare guanidine-type alkaloids, Buthutin A (1) and Buthutin B (2), along with two other compounds (3, 4), were isolated from Buthus martensii Karsch, and determined using extensive spectroscopic data analysis and high resolution-mass spectrometry. Compound 1 showed the most potent inhibition on AChE and BChE with IC50 values of 7.83 ± 0.06 and 47.44 ± 0.95 µM, respectively. Kinetic characterization of compound 1 confirmed a mixed-type of AChE inhibition mechanism in accordance with the docking results, which shows its interaction with both catalytic active (CAS) and peripheral anionic (PAS) sites. The specific binding of compound 1 to PAS domain of AChE was also confirmed experimentally. Moreover, compounds 1 and 3 exhibited satisfactory biometal binding abilities toward Cu2+, Fe2+, Zn2+ and Al3+ ions. These results provide a new evidence for further development and utilization of B. martensii in health and pharmaceutical products.

An Isolable Mononuclear Palladium(I) Amido Complex.

Mononuclear Pd(I) species are putative intermediates in Pd-catalyzed reactions, but our knowledge about them is limited due to difficulties in accessing them. Herein, we report the isolation of a Pd(I) amido complex, [(BINAP)Pd(NHArTrip)] (BINAP = 2,2'-bis(diphenylphosphino)-1,1'-binaphthalene, ArTrip = 2,6-bis(2',4',6'-triisopropylphenyl)phenyl), from the reaction of (BINAP)PdCl2 with LiNHArTrip. This Pd(I) amido species has been characterized by X-ray crystallography, electron paramagnetic resonance, and multiedge Pd X-ray absorption spectroscopy. Theoretical study revealed that, while the three-electron-two-center π-interaction between Pd and N in the Pd(I) complex imposes severe Pauli repulsion in its Pd-N bond, pronounced attractive interligand dispersion force aids its stabilization. In accord with its electronic features, reactions of homolytic Pd-N bond cleavage and deprotonation of primary amines are observed on the Pd(I) amido complex.

Synthesis, Biomacromolecular Interactions, Photodynamic NO Releasing and Cellular Imaging of Two [RuCl(qn)(Lbpy)(NO)]X Complexes.

Two light-activated NO donors [RuCl(qn)(Lbpy)(NO)]X with 8-hydroxyquinoline (qn) and 2,2'-bipyridine derivatives (Lbpy) as co-ligands were synthesized (Lbpy1 = 4,4'-dicarboxyl-2,2'-dipyridine, X = Cl- and Lbpy2 = 4,4'-dimethoxycarbonyl-2,2'-dipyridine, X = NO3-), and characterized using ultraviolet-visible (UV-vis) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (1H NMR), elemental analysis and electrospray ionization mass spectrometry (ESI-MS) spectra. The [RuCl(qn)(Lbpy2)(NO)]NO3 complex was crystallized and exhibited distorted octahedral geometry, in which the Ru-N(O) bond length was 1.752(6) Å and the Ru-N-O angle was 177.6(6)°. Time-resolved FT-IR and electron paramagnetic resonance (EPR) spectra were used to confirm the photoactivated NO release of the complexes. The binding constant (Kb) of two complexes with human serum albumin (HSA) and DNA were quantitatively evaluated using fluorescence spectroscopy, Ru-Lbpy1 (Kb~106 with HSA and ~104 with DNA) had higher affinity than Ru-Lbpy2. The interactions between the complexes and HSA were investigated using matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF-MS) and EPR spectra. HSA can be used as a carrier to facilitate the release of NO from the complexes upon photoirradiation. The confocal imaging of photo-induced NO release in living cells was successfully observed with a fluorescent NO probe. Moreover, the photocleavage of pBR322 DNA for the complexes and the effect of different Lbpy substituted groups in the complexes on their reactivity were analyzed.

A hexagonal planar transition-metal complex.

Transition-metal complexes are widely used in the physical and biological sciences. They have essential roles in catalysis, synthesis, materials science, photophysics and bioinorganic chemistry. Our understanding of transition-metal complexes originates from Alfred Werner's realization that their three-dimensional shape influences their properties and reactivity1, and the intrinsic link between shape and electronic structure is now firmly underpinned by molecular-orbital theory2-5. Despite more than a century of advances in this field, the geometries of transition-metal complexes remain limited to a few well-understood examples. The archetypal geometries of six-coordinate transition metals are octahedral and trigonal prismatic, and although deviations from ideal bond angles and bond lengths are frequent6, alternative parent geometries are extremely rare7. The hexagonal planar coordination environment is known, but it is restricted to condensed metallic phases8, the hexagonal pores of coordination polymers9, or clusters that contain more than one transition metal in close proximity10,11. Such a geometry had been considered12,13 for [Ni(PtBu)6]; however, an analysis of the molecular orbitals suggested that this complex is best described as a 16-electron species with a trigonal planar geometry14. Here we report the isolation and structural characterization of a simple coordination complex in which six ligands form bonds with a central transition metal in a hexagonal planar arrangement. The structure contains a central palladium atom surrounded by three hydride and three magnesium-based ligands. This finding has the potential to introduce additional design principles for transition-metal complexes, with implications for several scientific fields.

Preparation, Diagnosis, Biological Activity, and Theoretical Studies of Some Mixed Drug Complexes.

This paper includes synthesis and characterization of mixed ligand complexes derived from mefenamic acid and metformin using transition metal ions such as Co(II) and Cu(II). These complexes have been characterized by magnetic susceptibility, molar conductance, TG analyses, and spectral techniques such as FTIR and UV spectra. The theoretical study of the ligands and their complexes using semiempirical (PM6) method was used to measure IR and UV spectroscopy, HOMO-LUMO categories of the ligands. These synthesized complexes are also studied for their biological activities. The studies made on these complexes proposed a six octahedral geometry.

Novel combinations of experimental and computational analysis tested on the binding of metalloprotoporphyrins to albumin.

The evidence that Human Serum Albumin (HSA) binds metal ions and organometallic compounds has generated interest in its physiological role as a metalloprotein and as a vehicle for synthetic biology applications (e.g., synthetic blood and solar energy conversion). HSA has been shown to bind metallo-porphyrins, however, the structural details of such interactions are available only for the HSA:heme complex. A typical challenge for studying the interaction of proteins with metalloporphyrins is the poor solubility of the ligands that affect the characterization the complexes. The manuscript shows that a combination of dialysis and centrifugation yields aqueous solutions that contain >90% HSA:porphyrin complexes and virtually eliminate aggregated ligands. The removal of aggregates increases the quality of the optical spectroscopy data which, in turn, yield more accurate binding constants (~0.1 and 2.1 × 106 M-1) and reveal FRET between Trp214 and the porphyrins. The Trp-porphyrin distance was estimated to be within the 28-34 Šrange and was used to guide the search of binding sites through a novel feedback approach with docking simulations. Results suggest while some protoporphyrins (metal-free, Fe(III)PPIX and Mg(II)PPIX) bind HSA at the heme site, others (Zn(II)PPIX, Mn(III)PPIX and Sn(IV)PPIX) are more likely to bind the Cys34.

Metabolomics Assay Identified a Novel Virulence-Associated Siderophore Encoded by the High-Pathogenicity Island in Uropathogenic Escherichia coli.

To date, yersiniabactin remains the only identified siderophore encoded by the high pathogenicity island (HPI) in uropathogenic Escherichia coli (UPEC). In the present study, we aim to discover and identify new siderophores in the HPI-dependent biosynthetic pathway using a combinational strategy of metabolomics and genetics. A global metabolome assay of wild-type UTI89, UTI89ΔybtS, and UTI89ΔybtS with the substrate addition of salicylic acid found numerous unknown metabolite features that were encoded by the HPI with an obvious substrate dependency on salicylic acid. One metabolite feature with m/ z 307.0206 was shown to have a similar phenotype as yersiniabactin. Furthermore, isotope mass spectrum calculations and MS/MS annotations were combined to identify this metabolite as HPTzTn-COOH. HPTzTn-COOH was verified as a new siderophore in this study, and it was observed to have a robust capacity to chelate different metals, including Al3+, Ni2+, and Ca2+, in addition to binding Fe3+. Our data revealed that HPTzTn-COOH has a stronger diagnostic ability over the more conventionally used yersiniabactin, as characterized by its high production throughout UPEC strains harboring HPI. Altogether, our discoveries revise the siderophore family, and HPTzTn-COOH can be classified as an additional key siderophore along with yersiniabactin.

Highly Effective Removal of Metal Cyanide Complexes and Recovery of Palladium Using Quaternary-Ammonium-Functionalized MOFs.

In this study, quaternary-ammonium-functionalized metal⁻organic frameworks (MOFs) Et-N-Cu(BDC-NH2)(DMF), were prepared, characterized, and applied for the highly effective removal of metal cyanide complexes, including Pd(CN)4²-, Co(CN)6³-, and Fe(CN)6³-. Batch studies were carried out, and the maximum adsorption capacities of Pd(II), Co(III), and Fe(III) reached 172.9, 101.0, and 102.6, respectively. Adsorption was rapid, and equilibrium was established within 30 min. Et-N-Cu(BDC-NH2)(DMF) exhibited high thermal and chemical stability. Furthermore, absorbed Pd(CN)4²- was selectively recovered by two-step elution. First, Co(CN)6³- and Fe(CN)6³- were eluted with a 1.5 mol L-¹ KCl solution. Elution rates of Co(CN)6³- and Fe(CN)6³- were greater than 98.0%, whereas the elution percentage of Pd(CN)4²- was less than 2.0%. Second, >97.0% Pd(CN)4²- on the loaded MOFs was eluted using a 2.0 mol L-¹ KI solution. The recovery rate of Pd(CN)4²- was greater than 91.0% after five testing cycles. Adsorption isotherms, kinetics models, and adsorption thermodynamics of Pd(CN)4²- on Et-N-Cu(BDC-NH2) (DMF) were also systematically investigated. The Et-N-Cu(BDC-NH2) (DMF) absorbent exhibited a rapid, excellent ability for the adsorption of metal cyanide complexes.

Chagosendines A - C, New Metal Complexes of Imidazole Alkaloids from the Calcareous Sponge Leucetta chagosensis.

Chemical examination of the bright yellow sponge Leucetta chagosensis resulted in the isolation of three new imidazole-based alkaloid complexes namely chagosendines A - C (1 - 3), together with known analogues pyronaamidine, naamidine J, and naamine C. Their structures were determined on the basis of extensive spectroscopic (IR, MS, NMR, and single-crystal X-ray diffraction) analysis in association with the chemical conversion. The isolated alkaloids together with three synthesized new homodimer complexes were evaluated for the cytotoxic activities against a panel of tumor cell lines. The copper complexes of imidazole alkaloids 2 and 3, as found from nature for the first time, exerted selective and remarkable activities against the tumor cell lines K562, HepG2, and HeLa.

A review on chiral separation by counter-current chromatography: Development, applications and future outlook.

Chiral separation has been a remarkably active area of research over the past long time and it still stays that way. Over the last few decades, counter-current chromatography (CCC) was successfully applied to the field of chiral separation. It provides an attractive approach to obtain pure enantiomer, particularly in preparative application because of its unique advantages of high load capacity, low solvent consumption and easy scale-up. The last several years great strides have been made in chiral separation by CCC, ranging from novel elution modes such as recycling elution mode and multiple dual mode elution to more specialized approaches such as pH-zone-refining and biphasic chiral recognition technologies. These developments have greatly improved the resolution of enantiomers and promoted the application of CCC in the field of chiral separation. Although not as popular as its application to the field of separation of natural product, the development of chiral separation by CCC should not be underrated. In this review article, we refer to the development, applications and future outlook of chiral separation by CCC, with emphasis on topics of its history, mechanism, advantages, limitations, current development and challenges. Meanwhile, its orientation of continued evolution and future outlook also have been discussed. While some scientific and technological problems have not yet been solved thoroughly, chiral separation by CCC has demonstrated potential advantages and prospects in this field and has good chance at preparative enantioseparation.

Efficient removal of EDTA-complexed Cu(II) by a combined Fe(III)/UV/alkaline precipitation process: Performance and role of Fe(II).

Efficient removal of heavy metal-EDTA complexes from water remains a challenge because of their good solubility and chemical stability. Herein, we employed a proprietary process, i.e., the Fe(III) displacement/UV irradiation/alkaline precipitation (denoted as Fe(III)/UV/OH), to enable an efficient removal of Cu(II)-EDTA complex from 19.2 mg Cu(II)/L to <1 mg Cu(II)/L. The combined process includes Fe(III) replacement with the complexed Cu(II) to form Fe(III)-EDTA and release the free Cu(II), UV-mediated catalytic decarboxylation of EDTA to form amine ligands and reduction of Fe(III) to Fe(II), and the final removal of Cu(II) through precipitation. The in situ formed Fe(II) is crucial to the final Cu(II) removal because it tends to form stable complexes with amine ligands (EDTA and its decarboxylation products), thereby inhibiting their re-complexation with the released Cu(II) and facilitating the formation of copper precipitates. Consequently, the methods capable of prolonging the life of Fe(II), e.g., increasing the Fe(III) addition or direct addition of Fe(II) into the Cu(II)-EDTA solution and deoxygenating the solution, could dramatically enhance the final Cu(II) removal. We also optimized the operational conditions of the process at the initial Cu(II)-EDTA of 19.2 mg Cu(II)/L.

Exploring the boundaries of direct detection and characterization of labile isomers - a case study of copper(ii)-dipeptide systems.

The investigation of the linkage isomers of biologically essential and kinetically labile metal complexes in aqueous solutions poses a challenge, as these microspecies cannot be separately studied. Therefore, derivatives are commonly used to initially determine the stability or spectral characteristics of at least one of the isomers. Here we directly detect the isomers, describe the metal ion coordination sphere, speciation and thermodynamic parameters by a synergistic application of temperature dependent EPR and CD spectroscopic measurements in copper(ii)-dipeptide systems including His-Gly and His-Ala ligands. The ΔH = (-23 ± 4) kJ mol-1 value of the standard enthalpy change corresponding to the peptide-type to histamine-type isomerisation equilibrium of the [CuL]+ complex was corroborated by several techniques. The preferential coordination of the side-chains was observed at lower temperatures, whereas, metal-binding of the backbone atoms became favourable upon increasing temperature. This study exemplifies the necessity of using temperature dependent multiple methodologies for a reliable description of similar systems for upstream applications.

Structural characterization of pyoverdines produced by Pseudomonas putida KT2440 and Pseudomonas taiwanensis VLB120.

The previously unknown sequences of several pyoverdines (PVD) produced by a biotechnologically-relevant bacterium, namely, Pseudomonas taiwanensis VLB120, were characterized by high performance liquid chromatography (HPLC)-high resolution mass spectrometry (HRMS). The same structural characterization scheme was checked before by analysis of Pseudomonas sp. putida KT2440 samples with known PVDs. A new sample preparation strategy based on solid-phase extraction was developed, requiring significantly reduced sample material as compared to existing methods. Chromatographic separation was performed using hydrophilic interaction liquid chromatography with gradient elution. Interestingly, no signals for apoPVDs were detected in these analyses, only the corresponding aluminum(III) and iron(III) complexes were seen. The chromatographic separation readily enabled separation of PVD complexes according to their individual structures. HPLC-HRMS and complementary fragmentation data from collision-induced dissociation and electron capture dissociation enabled the structural characterization of the investigated pyoverdines. In Pseudomonas sp. putida KT2240 samples, the known pyoverdines G4R and G4R A were readily confirmed. No PVDs have been previously described for Pseudomonas sp. taiwanensis VLB120. In our study, we identified three new PVDs, which only differed in their acyl side chains (succinic acid, succinic amide and malic acid). Peptide sequencing by MS/MS provided the sequence Orn-Asp-OHAsn-Thr-AcOHOrn-Ser-cOHOrn. Of particular interest is the presence of OHAsn, which has not been reported as PVD constituent before.

Extraction and characterization of ternary complexes between natural organic matter, cations, and oxyanions from a natural soil.

Natural organic matter (NOM) can have a significant influence on the mobility and fate of inorganic oxyanions, such as arsenic and selenium, in the environment. There is evidence to suggest that interactions between NOM and these oxyanions are facilitated by bridging cations (primarily Fe3+) through the formation of ternary complexes. Building on previous work characterizing ternary complexes formed in the laboratory using purified NOM, this study describes the extraction and characterization of intact ternary complexes directly from a soil matrix. The complexes are stable to the basic extraction conditions (pH 12) and do not appear to change when the pH of the extract is adjusted back to neutral. The results suggest that ternary complexes between NOM, cations, and inorganic oxyanions exist in natural soils and could play a role in the speciation of inorganic oxyanions in environmental matrices.

UV-vis spectroscopy and colorimetric models for detecting anthocyanin-metal complexes in plants: An overview of in vitro and in vivo techniques.

Although anthocyanin (ACN) biosynthesis is one of the best studied pathways of secondary metabolism in plants, the possible physiological and ecological role(s) of these pigments continue to intrigue scientists. Like other dihydroxy B-ring substituted flavonoids, ACNs have an ability to bind metal and metalloid ions, a property that has been exploited for a variety of purposes. For example, the metal binding ability may be used to stabilize ACNs from plant food sources, or to modify their colors for using them as food colorants. The complexation of metals with cyanidin derivatives can also be used as a simple, sensitive, cheap, and rapid method for determination concentrations of several metals in biological and environmental samples using UV-vis spectroscopy. Far less information is available on the ecological significance of ACN-metal complexes in plant-environment interactions. Metalloanthocyanins (protocyanin, nemophilin, commelinin, protodelphin, cyanosalvianin) are involved in the copigmentation phenomenon that leads to blue-pigmented petals, which may facilitate specific plant-pollinator interactions. ACN-metal formation and compartmentation into the vacuole has also been proposed to be part of an orchestrated detoxification mechanism in plants which experience metal/metalloid excess. However, investigations into ACN-metal interactions in plant biology may be limited because of the complexity of the analytical techniques required. To address this concern, here we describe simple methods for the detection of ACN-metal both in vitro and in vivo using UV-vis spectroscopy and colorimetric models. In particular, the use of UV-vis spectra, difference absorption spectra, and colorimetry techniques will be described for in vitro determination of ACN-metal features, whereas reflectance spectroscopy and colorimetric parameters related to CIE L*a*b* and CIE XYZ systems will be detailed for in vivo analyses. In this way, we hope to make this high-informative tool more accessible to plant physiologists and ecologists.

Fungal biomass as biosorbent for the removal of Acid Blue 161 dye in aqueous solution.

Physical and thermal treatment was used to inactivate Trametes sp. SC-10 fungus. The resulting biomass was named BTV, characterized by analytical techniques such as SEM, EDX, FTIR, BET, and Barrett-Joyner-Halenda (BJH) model. pH, kinetic, and equilibrium adsorption studies with the Acid Blue 161 (AB-161) dye were investigated at 303.15 K. The kinetics of the biosorption process were examined at 600.00 and 1300 mg L-1, using pseudo-first-order, pseudo-second-order, and Avrami fractional-order models. The maximum biosorption capacity of BTV for AB-161 dye was 221.6 mg g-1. Considering the biosorption data and the functional groups of BTV, it can be inferred that the sorption mechanism of AB-161 is regulated by electrostatic interactions between ionized dye molecules and negative charges on BTV in an aqueous solution. Finally, the BTV was tested with a simulated effluent with 89.47% efficiency, presenting the BTV as a biosorbent for real effluents polluted with dyes.

ASP2397: a novel antifungal agent produced by Acremonium persicinum MF-347833.

The novel antifungal agent ASP2397 (Vical's compound ID VL-2397) is produced by the fungal strain MF-347833 that was isolated from Malaysian leaf litter and is identified here as an Acremonium species based on its morphology, physiological properties and 28S ribosomal DNA sequence. Because of its potential importance for producing novel antifungal agents, we determined the taxonomic and biologic properties of MF-347833. We show here that ASP2397 is a cyclic hexapeptide that chelates aluminum ion and is therefore similar to ferrichrome, a hydroxamate siderophore. However, ASP2397 differs structurally from licensed antifungal agents such as amphotericin B, triazoles and echinocandins. To understand the relationship between chemical structure and biological function, we isolated certain ASP2397 derivatives from the culture broth, and we further chemically converted the metal-free form to other derivatives.

Metal Ions Analysis with Capillary Zone Electrophoresis.

Capillary electrophoresis has recently attracted considerable attention as a promising analytical technique for metal ion separations. Significant advances that open new application areas for capillary electrophoresis in the analysis of metal species occurred based on various auxiliary separation principles. These are mainly due to complexation, ion pairing, solvation, and micellization interactions between metal analytes and electrolyte additives, which alter the separation selectivity in a broad range. Likewise, many separation studies for metal ions have been concentrated on the use of preelectrophoresis derivatization methodology. Approaches suitable for manipulation of selectivity for different metal species including metal cations, metal complexes, metal oxoanions, and organometallic compounds, are discussed, with special attention paid to the related electrophoretic system variables using illustrative examples.

Isolation of a Cyclic (Alkyl)(amino)germylene.

A 1,4-addition of a dichlorogermylene dioxane complex with α,ß-unsaturated imine 1 gave a dichlorogermane derivative 2 bearing a GeC3N five-membered ring skeleton. By reducing 2 with KC8, cyclic (alkyl)(amino)germylene 3 was synthesized and fully characterized. Germylene 3 readily reacted with TEMPO, N2O and S8, producing the 1:2 adduct 4, the oxo-bridged dimer 5 and the sulfido-bridged dimer 6, respectively.

Analytical and preparative enantioseparation and main chiroptical properties of Iridium(III) bis(4,6-difluorophenylpyridinato)picolinato.

Almost all Iridium(III) complexes employed both as dopants in PhOLEDs and as pharmaceuticals and fluorescence bioprobes are racemic mixtures. In this study the single enantiomers of the most stable diastereomeric form fac-trans-N-N, bis[2-(4,6-difluorophenyl)pyridinato-C2,N](picolinato)iridium(III) (FIrpic) were separated and analysed. The data obtained showed that the complex can be separated into stable optically active Λ and Δ isomers employing cellulose based chiral stationary phase both in normal and polar phase mode. Their chirality was confirmed and their absolute configuration assigned employing several methods (DFT and TDDFT calculations, CD and VCD). The CPL spectroscopy of the isolated enantiomers of FIrpic was also recorded due to its possible value in the OLEDs field. The chromatographic method was applied for a semipreparative purpose demonstrating that polar organic solvent chromatography (POSC) could be used to avoid the low-solubility issues associated with these Iridium(III) complexes. Finally, the chemical and stereochemical stability of the single isomers was evaluated under thermal stress by liquid chromatography coupled to high-resolution mass spectrometry (LC-QTOF) on both chiral and achiral columns. No racemization and/or isomerization was observed; however, the dissociation of the ancillary ligand was demonstrated employing LC-QTOF.