Investigation of the cytotoxic effect of current dentine bonding agents on human dental pulp cells.

BACKGROUND: An ideal aesthetic restorative material should be attached to the tooth tissues by adhesion, have a smooth surface as possible, should not cause toxic reactions in the pulp and discoloration and microleakage. This study aims at comparatively assess the cytotoxicity of current adhesive systems on human dental pulp cells. MATERIALS AND METHODS: The adequate density of human pulp cells was observed from the ready cell line. The passaging was performed and the 3rd passage cells were selected. Adhesive systems and MTA were used on the cultures. Trypan blue staining was conducted on the cells at the 1st, 2nd, 3rd days and a count of live and dead cells using a light microscope. The dead cells whose membrane integrity was impaired by staining with trypan blue and the viability rate was determined using live and dead cell numbers. Data analysis was performed using IBM SPSS Statistics 22. RESULTS: A significant difference in vialibity rates between adhesive systems was observed on the first day. No significant statistical differences were observed on the 2nd and 3rd days (p < 0.05). CONCLUSION: Futurabond M showed similar biocompatibility with MTA on human pulp cells and it can be applied in cavities with 1-1.5 mm hard tissue between pulp and dentine.

Investigation of the biocompatibility of various pulp capping materials on zebrafish model.

Testing the biocompatibility of commercially available dental materials is a major challenge in dental material science. In the present study, the biocompatibility of four commercially available dental materials Mineral Trioxide Aggregate, Biodentine, Harvard BioCal-CAP and Oxford ActiveCal PC was investigated. The biocompatibility analysis was performed on zebrafish embryos and larvae using standard toxicity tests such as survivability and hatching rates. Comparative toxicity analysis of toxicity was performed by measuring apoptosis using acridine orange dye and whole mount immunofluorescence methods on zebrafish larvae exposed to the dental materials at different dilutions. Toxicity analysis showed a significant decrease in survival and hatching rates with increasing concentration of exposed materials. The results of the apoptosis assay with acridine orange showed greater biocompatibility of Biodentine, Oxford ActiveCal PC, Harvard BioCal-CAP and Biodentine compared to MTA, which was concentration dependent. Consequently, this study has shown that showed resin-modified calcium silicates are more biocompatible than traditional calcium silicates.

In vitro safety profile and phyto-ecotoxicity assessment of the eco-friendly calcium oxide nanoparticles.

The present study aims to evaluate the toxicity of the green calcium oxide nanoparticles (CaO-NPs) from golden linseed extract (Linum usitatissimum L.) by phytotoxicity in seeds (Daucus carota, Beet shankar, Lactuca sativa and Brassica oleracea), in vitro safety profile and soil toxicity for CaO-NPs solutions from 12.5 to 100 µg mL-1. Ecotoxicity analysis of the soil was conducted using XRD diffractograms, which revealed characteristic peaks of the nanoparticles at 37.35° (12.5, 25, 50, and 100 µg mL-1), as well as a peak at 67.34° (25 and 100 µg mL-1). Additionally, the in vitro safety assessment indicated favorable cell specification and regulation within the first 24 h, demonstrating reductions of 15.9 ± 0.2%, 17.9 ± 0.2%, 17.6 ± 0.2%, and 32.9 ± 0.2% to 12.5, 25, 50, and 100 µg mL-1, respectively. The dsDNA assay revealed initial protection and controlled release within the cells for 48 h. However, after 72 h, there was an increase of 20 ± 0.2%, 16 ± 0.2%, 32 ± 0.2%, and 43 ± 0.2% to 12.5, 25, and 50 µg mL-1. The analysis of ROS generation demonstrated a reduction of 40 ± 0.2%, 33 ± 0.2%, 20 ± 0.2%, and 9 ± 0.2% to 12.5, 25, 50, and 100 µg mL-1, respectively, within 72 h. When compared to the negative control (NC), there was an increase of 50 ± 0.2%, 56 ± 0.2%, 77 ± 0.2%, and 92 ± 0.2% at the same concentrations, suggesting that the nanoparticles generated free radicals, leading to cellular inflammation. This was attributed to the positive surface charge of the nanoparticles, resulting in reduced interaction with the cell membrane and the subsequent release of hydroxyl (•OH), which caused inflammatory processes in the cells. Therefore, CaO-NPs exhibited a low phytotoxicity and high cytocompatibility, while also promoting plant germination and growth.

Oryza glumaepatula and calcium oxide nanoparticles enhanced Cr stress tolerance by maintaining antioxidant defense, chlorophyll and gene expression levels in rice.

Chromium (Cr), a potent heavy metal, threatens rice cultivation due to its escalating presence in soil from human activities. Wild rice contains useful genes for phytoremediation; however, it is difficult to use directly for metal mitigation. Here, a single segment substitution line (SSSL), SG001, was developed by crossing O. glumaepatula and Huajingxian74 (HJX) to evaluate the survival ability of plants against Cr. Further, we explored the potential effect of calcium oxide nanoparticles (CaO-NPs) (50 µM) to minimize the toxic effect of Cr (100 µM) in rice cultivars, SG001 and HJX. The findings of this study indicated that Cr toxicity led to increased oxidative stress. This was shown by higher levels of hydrogen peroxide (H2O2), which was increased by 104% in SG001 and 177% in HJX, and malondialdehyde (MDA) increased by 79% in SG001 and 135% in HJX. Furthermore, it also depicted that Cr toxicity considerably declined shoot and root length, shoot and root fresh weight by 30%, 27%, 25%, and 20% in SG001 and 44%, 51%, 42%, and 45% in HJX, respectively. This mitigation was evidenced by decreased Cr contents, increased calcium (Ca) levels in SG001, and the maintenance of chlorophyll, antioxidant defense, and gene expression levels. Moreover, there was a notable reduction in MDA and H2O2, while the defense mechanisms of key antioxidants, including ascorbate peroxidase, superoxide dismutase, glutathione, catalase, and peroxidase were upregulated, along with an increase in soluble protein contents in both rice cultivars after applying CaO-NPs. CaO-NPs effectively restored cellular and subcellular structural integrity and growth in both lines, which had been seriously disrupted by Cr toxicity. Overall, our findings suggest that SG001, in combination with CaO-NPs, could serve as an effective strategy to mitigate Cr toxicity in plants.

Cytotoxicity of dilutions of bioceramic materials in stem cells of human exfoliated deciduous teeth.

OBJECTIVE: Several materials have been developed to preserve pulp vitality. They should have ideal cytocompatibility characteristics to promote the activity of stem cells of human exfoliated deciduous teeth (SHED) and thus heal pulp tissue. OBJECTIVE: To evaluate the cytotoxicity of different dilutions of bioceramic material extracts in SHED. METHODOLOGY: SHED were immersed in αMEM + the material extract according to the following experimental groups: Group 1 (G1) -BBio membrane, Group 2 (G2) - Bio-C Repair, Group 3 (G3) - MTA Repair HP, Group 4 (G4) - TheraCal LC, and Group 5 (G5) - Biodentine. Positive and negative control groups were maintained respectively in αMEM + 10% FBS and Milli-Q Water. The methods to analyze cell viability and proliferation involved MTT and Alamar Blue assays at 24, 48, and 72H after the contact of the SHED with bioceramic extracts at 1:1 and 1:2 dilutions. Data were analyzed by the three-way ANOVA, followed by Tukey's test (p<0.05). RESULTS: At 1:1 dilution, SHED in contact with the MTA HP Repair extract showed statistically higher cell viability than the other experimental groups and the negative control (p<0.05), except for TheraCal LC (p> 0.05). At 1:2 dilution, BBio Membrane and Bio-C showed statistically higher values in intra- and intergroup comparisons (p<0.05). BBio Membrane, Bio-C Repair, and Biodentine extracts at 1:1 dilution showed greater cytotoxicity than 1:2 dilution in all periods (p<0.05). CONCLUSION: MTA HP Repair showed the lowest cytotoxicity even at a 1:1 dilution. At a 1:2 dilution, the SHED in contact with the BBio membrane extract showed high cell viability. Thus, the BBio membrane would be a new non-cytotoxic biomaterial for SHED. Results offer possibilities of biomaterials that can be indicated for use in clinical regenerative procedures of the dentin-pulp complex.

Discerning the role of a site cation in ACoO3 perovskites for boosting Co3+/Co2+ redox cycle for pollutant degradation: DFT calculation, mechanism and toxicity evolution.

The degradation of persistent and refractory pollutants, particularly plastic and resins manufacturing wastewater, poses a significant challenge due to their high toxicity and high concentrations. This study developed a novel hybrid ACoO3 (A = La, Ce, Sr)/PMS perovskite system for the treatment of multicomponent (MCs; ACN, ACM and ACY) from synthetic resin manufacturing wastewater. Synthesized perovskites were characterized by various techniques i.e., BET, XRD, FESEM with EDAX, FTIR, TEM, XPS, EIS, and Tafel analysis. Perovskite LaCoO3 exhibited the highest degradation of MCs i.e., ACN (98.7%), ACM (86.3%), and ACY (56.4%), with consumption of PMS (95.2%) under the optimal operating conditions (LaCoO3 dose 0.8 g/L, PMS dose 2 g/L, pH 7.2 and reaction temperature 55 °C). The quantitative contribution (%) of reactive oxygen species (ROS) reveals that SO4•- are the dominating radical species, which contribute to ACN (58.3% for SO4•- radicals) and ACM degradation (46.4% for SO4•- radicals). The tafel plots and EIS spectra demonstrated that perovskites LaCoO3 have better charge transfer rates and more reactive sites that are favorable for PMS activation. Further, four major degradation pathways were proposed based on Fukui index calculations, as well as GC-MS characterization of intermediate byproducts. Based on a stability and reusability study, it was concluded that LaCoO3 perovskites are highly stable, and minimal cobalt leaching occurs (0.96 mg/L) after four cycles. The eco-toxicity assessment performed using QSAR model indicated that the byproducts of the LaCoO3/PMS system are non-toxic nature to common organism (i.e., fish, daphnids and green algae). In addition, the cost of the hybrid LaCoO3/PMS system in a single cycle was estimated to be $34.79 per cubic meter of resin wastewater.

Lead-rivet strategy of growing perovskite nanocrystals for excellent toxicity inhibition and spinning application.

Lead halide perovskite has demonstrated remarkable potential in the wearable field due to its exceptional photoelectric conversion capability. However, its lead toxicity issue has consistently been subject to criticism, significantly impeding its practical application. To address this challenge, an innovative approach called lead-rivet was proposed for the in-situ growth of perovskite crystalline structures. Through the formation of S-Pb bonds, each Pb2+ ion was firmly immobilized on the surface of the silica matrix, enabling in situ growth of perovskite nanocrystals via ion coordination between Cs+ and halide species. The robust S-Pb bonding effectively restricted the mobility of lead ions and stabilized the perovskite structure without relying on surface ligands, thereby not only preventing toxicity leakage but also providing a favorable interface for depositing protective shells. The obtained perovskites exhibit intense and narrow-band fluorescence with full-width at half-maximum less than 23 nm and show excellent stability to high temperature (above 202 °C) and high humidity (water immersion over 27 days), thus making it possible to be used in varies textile technologies including melt spinning and wet spinning. The lead leakage rate of particles is only 4.15 % demonstrating excellent toxicity inhibition performance. The prepared fibers maintained good extensibility and flexibility which could be used for 3D-printing and textiles weaving. Most importantly, the detected Pb2+ leaching was negligible as low as to 0.732 ppb which meet the standard of World Health Organization (WHO) for drinking water (<10 ppb), and the cell survival rate remained 99.196 % for PLA fluorescent filament after 24 h cultivation which showing excellent safety to human body and environment. This study establishes a controllable and highly adaptable synthesis method, thereby providing a promising avenue for the safe utilization of perovskite materials.

Leaching and cytotoxicity of bismuth oxide in ProRoot MTA - A laboratory investigation.

AIM: The present study examined the leaching and cytotoxicity of bismuth from ProRoot MTA and aimed to identify whether bismuth leaching was affected by the cement base and the immersion regime used. METHODOLOGY: The leaching profile of bismuth was examined from ProRoot MTA and compared with hydroxyapatite containing 20% bismuth oxide as well as hydroxyapatite and tricalcium silicate to investigate whether bismuth release changed depending on the cement base. Bismuth leaching was determined after 30 and 180 days of ageing immersed in Dulbecco's modified Eagle's medium (DMEM) using mass spectroscopy (ICP-MS). The media were either unchanged or regularly replenished. The pH, surface microstructure and phase changes of aged materials were assessed. Wistar rat femoral bone marrow stromal cells (BMSCs) and cutaneous fibroblasts were isolated, cultured and seeded for cell counting (trypan blue live/dead) after exposure to non-aged, 30- and 180-days-aged samples in regularly replenished DMEM. Aged DMEM in contact with materials was also used to culture BMSCs to investigate the effect of material leachates on the cells. Gene expression analysis was also carried out after direct exposure of cells to non-aged materials. Differences between groups were statistically tested at a significance level of 5%. RESULTS: All materials exhibited alterations after immersion in DMEM and this increased with longer exposure times. The bismuth leached from ProRoot MTA as detected by ICP-MS. Aged ProRoot MTA samples exhibited a black discolouration and surface calcium carbonate deposition. ProRoot MTA influenced cell counts after direct exposure and its 180-days leachates reduced BMSC viability. After direct BMSC contact with non-aged ProRoot MTA an upregulation of metallothionein (MT1 and MT2A) expression and down-regulation of collagen-1a (Col-1a) and bone sialoprotein (BSP) expression was identified. CONCLUSIONS: Bismuth leaching was observed throughout 180-days observation period from all materials containing bismuth oxide. This negatively influenced cell viability and gene expression associated with bismuth exposure. This is the first study to report that metallothionein gene expression was influenced by exposure to ProRoot MTA.

Evaluation of the genotoxicity, cytotoxicity, and bioactivity of calcium silicate-based cements.

BACKGROUND: As calcium silicate-based cements (CSCs) have found success in various vital pulp therapy applications, several new CSC products have emerged. This study aimed to assess the genotoxicity, cytotoxicity, and bioactivity of four CSCs by comparing the newly introduced materials Bio MTA+ and MTA Cem with previously studied materials, Biodentine and NeoMTA. METHODS: Genotoxicity was evaluated using the micronucleus (MN) assay in human peripheral blood lymphocyte cells, measuring MN frequency and nuclear division index (NDI). Cytotoxicity was assessed in human dental pulp stem cells through the Water-Soluble Tetrazolium Salt-1 (WST-1) colorimetric assay. Bioactivity was determined by ELISA, measuring the levels of angiogenic and odontogenic markers (BMP-2, FGF-2, VEGF, and ALP). Statistical analyses included ANOVA, Dunnet and Sidak tests, and Wald chi-square test. (p < .05). RESULTS: The MN frequency in the groups was significantly lower than that in the positive control group (tetraconazole) (p < .05). NDI values decreased with increasing concentration (p < .05). Bio MTA+ and NeoMTA showed decreased cell viability at all concentrations in 7-day cultures (p < .01). All materials increased BMP-2, FGF-2, and VEGF levels, with Biodentine and NeoMTA showing the highest levels of BMP-2 and FGF-2 on day 7. Biodentine displayed the highest VEGF levels on day 7. Biodentine and NeoMTA groups exhibited significantly higher ALP activity than the Bio MTA+ and MTA Cem groups by day 7. CONCLUSION: Bio MTA+ and MTA Cem demonstrated no genotoxic or cytotoxic effects. Moreover, this study revealed bioactive potentials of Bio MTA+ and MTA Cem by enhancing the expression of angiogenic and osteogenic growth factors.

Comprehensive Neurotoxicity of Lead Halide Perovskite Nanocrystals in Nematode Caenorhabditis elegans.

To date, all-inorganic lead halide perovskite quantum dots have emerged as promising materials for photonic, optoelectronic devices, and biological applications, especially in solar cells, raising numerous concerns about their biosafety. Most of the studies related to the toxicity of perovskite quantum dots (PeQDs) have focused on the potential risks of hybrid perovskites by using zebrafish or human cells. So far, the neurotoxic effects and fundamental mechanisms of PeQDs remain unknown. Herein, a comprehensive methodology is designed to investigate the neurotoxicity of PeQDs by using Caenorhabditis elegans as a model organism. The results show that the accumulation of PeQDs mainly focuses on the alimentary system and head region. Acute exposure to PeQDs results in a decrease in locomotor behaviors and pharyngeal pumping, whereas chronic exposure to PeQDs causes brood decline and shortens lifespan. In addition, some abnormal issues occur in the uterus during reproduction assays, such as vulva protrusion, impaired eggs left in the vulva, and egg hatching inside the mother. Excessive reactive oxygen species formation is also observed. The neurotoxicity of PeQDs is explained by gene expression. This study provides a complete insight into the neurotoxicity of PeQD and encourages the development of novel nontoxic PeQDs.

Biotoxicity of Halide Perovskites in Mice.

Halide perovskites are crystalline semiconductors with exceptional optoelectronic properties, rapidly developing toward large-scale applications. Lead (II) (Pb2+ ) is the core element used to prepare halide perovskites. Pb2+ can displace key 2+ elements, including calcium, zinc and iron, that regulate vital physiological functions. Sn2+ can replace Pb2+ within the perovskite structure and, if accidentally dispersed in the environment, it readily oxidizes to Sn4+ , which is compatible with physiological functions and thus potentially safe. The 3+ salt bismuth (III) (Bi3+ ) is also potentially safe for the same reason and useful to prepare double perovskites. Here, this work studies the biotoxicity of Pb, Sn, and Bi perovskites in mice for the first time. This work analyses histopathology and growth of mice directly exposed to perovskites and investigate the development of their offspring generation. This study provides the screening of organs and key physiological functions targeted by perovskite exposure to design specific studies in mammalians.

Study on myocardial toxicity induced by lead halide perovskites nanoparticles.

Lead halide perovskites (LHPs) are outstanding candidates for next-generation optoelectronic materials, with considerable prospects of use and commercial value. However, knowledge about their toxicity is scarce, which may limit their commercialization. Here, for the first time, we studied the cardiotoxicity and molecular mechanisms of representative CsPbBr3 nanoparticles in LHPs. After their intranasal administration to Institute of Cancer Research (ICR) mice, using advanced synchrotron radiation, mass spectrometry, and ultrasound imaging, we revealed that CsPbBr3 nanoparticles can severely affect cardiac systolic function by accumulating in the myocardial tissue. RNA sequencing and Western blotting demonstrated that CsPbBr3 nanoparticles induced excessive oxidative stress in cardiomyocytes, thereby provoking endoplasmic reticulum stress, disturbing calcium homeostasis, and ultimately leading to apoptosis. Our findings highlight the cardiotoxic effects of LHPs and provide crucial toxicological data for the product.

Cytocompatibility and cell migration evaluation of calcium silicate-based root canal sealer compared to epoxide-amine resin sealer in stem cells from human apical papilla: An in-vitro study.

The purpose of this study was to assess the effect of a calcium silicate-based sealers (CeraSeal) and an epoxy resin-based sealer (AH Plus) on cytotoxicity and cell migration of stem cell from the human apical papilla (hSCAPs) by using the Alamar Blue, Annexin V-FICT and wound healing assays. In Alamar Blue assay, hSCAPs exposed to undiluted CeraSeal extract had significantly higher cell viability compared with that observed when cells were treated with AH Plus in all experimental period (p < 0.001). The flow cytometry analysis confirmed the comparison on viable cells and indicated that AH Plus increased apoptosis compared to CeraSeal and the control groups (p < 0.001). Additionally, AH Plus exhibited significantly lower level of cell migration than CeraSeal and the control for up to 48 h observation (p < 0.01). In summary, calcium silicate-based sealer (CeraSeal) is less cytotoxic and more biocompatible than epoxy resin-based sealer (AH Plus).

Cytotoxicity and genotoxicity of Bio-C Repair, Endosequence BC Root Repair, MTA Angelus and MTA Repair HP.

The aim was to evaluate in vitro cytotoxicity and genotoxicity of Bio-C Repair (BCR), compared to Endosequence BC Root Repair (ERRM), MTA Angelus (MTA-Ang), and MTA Repair HP (MTA-HP). MC3T3 osteoblastic cells were exposed to extracts of the repairing bioceramic cements. After 1, 3, and 7 days, cytotoxicity and genotoxicity were evaluated by MTT and Micronucleus tests, respectively. Cells not exposed to biomaterials were used as a negative control. Data were compared using ANOVA two-way, followed by the Tukey Test (α=5%). MTA-Ang and MTA-HP showed no difference in relation to control regarding cytotoxicity in any experimental times. BCR and ERRM reduced cell viability after 3 and 7 days (p<0.05); however, the reduction caused by BCR was less than that caused by ERRM. Considering the micronucleus formation, all biomaterials caused an increase after 3 and 7 days (p<0.05), being greater for the BCR and ERRM groups. It can be concluded that BCR is non-cytotoxic in osteoblastic cells, as well as MTA-Ang e MTA Repair HP. BCR and ERRM showed greater genotoxicity than others tested biomaterials.

Physicochemical properties, cytotoxicity and bioactivity of a ready-to-use bioceramic repair material.

The aim of this study was to evaluate the physicochemical properties, cytotoxicity and bioactivity of a ready-to-use bioceramic material, Bio-C Repair (Angelus), in comparison with White MTA (Angelus) and Biodentine (Septodont). The physicochemical properties of setting time, radiopacity, pH, solubility, dimensional and volumetric changes were evaluated. Biocompatibility and bioactivity were assessed in Saos-2 osteoblast cell cultures by the MTT assay 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide), Neutral Red (NR), Alizarin Red (ARS), and cell migration tests. Statistical analysis was performed by ANOVA, Tukey or Bonferroni tests (α = 0.05). Bio-C Repair had the longest setting time (p < 0.05), but radiopacity and solubility were accordance with the ISO 6876/2012 standards, besides linear expansion. Bio-C Repair and MTA had similar volumetric change (p > 0.05); lower than Biodentine (p < 0.05). All the materials evaluated had an alkaline pH. Bio-C Repair was cytocompatible and promoted mineralized nodule deposition in 21 days and cell migration in 3 days. In conclusion, Bio-C Repair had adequate radiopacity above 3mm Al, solubility less than 3%, dimensional expansion, and low volumetric change. In addition, Bio-C Repair promoted an alkaline pH and presented bioactivity and biocompatibility similar to MTA and Biodentine, showing potential for use as a repair material.

Evaluation of Cytotoxicity of Calcium Silicate-based Mineral Trioxide Aggregate Sealers: A Systematic Review of In Vitro Studies.

AIM: This review aimed to evaluate the in vitro studies done with regard to the cytotoxicity associated with mineral trioxide aggregate (MTA)-based root canal sealers. BACKGROUND: Root canal sealers are used during endodontic treatment as fillers to seal the gaps between the canal gutta-percha cone and canal walls. It is necessary to understand the cytotoxicity of these materials on human-derived cells as these materials interact with human cells periapically. REVIEW RESULTS: Six in vitro studies were chosen for review. In these selected studies, along with MTA-based root canal sealers, other sealers were tested for cytotoxicity on human periodontal ligament (PDL) stem cells, human PDL fibroblasts, and human osteoblast cells. Regarding cytotoxicity, the studies were diverse, and most were based on 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyl-2H-tetrazolium bromide) (MTT) assay. In general, the studies suggested that root canal sealers cause mild to severe cytotoxic effects and that several factors influence this effect, such as material setting time, concentration, and duration of exposure. CONCLUSION: All studies in the review indicated that MTA. Fillapex must be used cautiously as it exhibited the highest cytotoxic effect compared to other MTA-based and non-MTA-based sealers. CLINICAL SIGNIFICANCE: Endodontic sealers do serve the purpose of bridging the gaps between the gutta-percha cone and the canal wall but knowing its biocompatibility becomes important as the material is extruded beyond the apical foramen where it comes in contact with the surrounding tissues. The effect of sealers on the surrounding tissues affects the healing and prognosis of the treatment.

Acute dose toxicity evaluation of the food supplement calcium 3-hydroxy-3-methylbutyrate (HMB) in female Sprague Dawley rats.

The leucine metabolite, 3-hydroxy-3-methylbutyrate (HMB), primarily utilized as the calcium salt (CaHMB) has become one of the most widely used supplements and food ingredients to promote muscle health. While both CaHMB and HMB free acid have published sub-chronic toxicity studies, and CaHMB has published studies on genotoxicity, data are lacking on the acute dosing of HMB which is important for regulatory and transportation classification as well as in cases of accidental overconsumption. Therefore, an acute oral toxicity study was conducted with CaHMB following OECD 420 guidelines. One rat was used in the dosage sighting study and four rats were used in the main study. In both studies, rats were given a single oral dose of 2000 mg/kg body weight by gavage and monitored for 14 days following the dosage for changes in body weight, clinical signs as noted in OECD 420, and at the end of the study a necropsy was conducted to determine any gross tissue abnormalities. The dosage of CaHMB administered resulted in no deaths, no significant adverse clinical signs, and no findings of lesions or abnormal tissues. Under the Global Harmonized System of classification, CaHMB was found to be in the least toxic Category 5 or non-toxic.

Environmental lead exposure from halide perovskites in solar cells.

Lead (Pb) is one of the most toxic elements in existence and has been used by humans for thousands of years. With only a few exceptions, each widespread application of lead has been banned systematically due to dramatic environmental and health consequences. However, we are now at the dawn of the perovskite era, potentially requiring yet again the widespread application of lead.

Potential lead toxicity and leakage issues on lead halide perovskite photovoltaics.

Recently, lead halide perovskite solar cells have become a promising next-generation photovoltaics candidate for large-scale application to realize low-cost renewable electricity generation. Although perovskite solar cells have tremendous advantages such as high photovoltaic performance, low cost and facile solution-based fabrication, the issues involving lead could be one of the main obstacles for its commercialization and large-scale applications. Lead has been widely used in photovoltaics industry, yielding its environmental and health issues of vital importance because of the widespread application of photovoltaics. When the solar cell panels especially perovskite solar cells are damaged, lead would possibly leak into the surrounding environment, causing air, soil and groundwater contamination. Therefore, lots of research efforts have been put into evaluating the lead toxicity and potential leakage issues, as well as studying the encapsulation of lead to deal with leakage issue during fire hazard and precipitation in photovoltaics. In this review, we summarize the latest progress on investigating the lead safety issue on photovoltaics, especially lead halide perovskite solar cells, and the corresponding solutions. We also outlook the future development towards solving the lead safety issues from different aspects.

Lung developmental is altered after inhalation exposure to various concentrations of calcium arsenate.

Exposure to dust from active and abandoned mining operations may be a very significant health hazard, especially to sensitive populations. We have previously reported that inhalation of real-world mine tailing dusts during lung development can alter lung function and structure in adult male mice. These real-world dusts contain a mixture of metal(loid)s, including arsenic. To determine whether arsenic in inhaled dust plays a role in altering lung development, we exposed C57Bl/6 mice to a background dust (0 arsenic) or to the background dust containing either 3% or 10% by mass, calcium arsenate. Total level of exposure was kept at 100 µg/m3. Calcium arsenate was selected since arsenate is the predominant species found in mine tailings. We found that inhalation exposure during in utero and postnatal lung development led to significant increases in pulmonary baseline resistance, airway hyper-reactivity, and airway collagen and smooth muscle expression in male C57Bl/6 mice. Responses were dependent on the level of calcium arsenate in the simulated dust. These changes were not associated with increased expression of TGF-ß1, a marker of epithelial to mesenchymal transition. However, responses were correlated with decreases in the expression of club cell protein 16 (CC16). Dose-dependent decreases in CC16 expression and increases in collagen around airways was seen for animals exposed in utero only (GD), animals exposed postnatally only (PN) and animals continuously exposed throughout development (GDPN). These data suggest that arsenic inhalation during lung development can decrease CC16 expression leading to functional and structural alterations in the adult lung.