Photoactivatable metabolic warheads enable precise and safe ablation of target cells in vivo.

Photoactivatable molecules enable ablation of malignant cells under the control of light, yet current agents can be ineffective at early stages of disease when target cells are similar to healthy surrounding tissues. In this work, we describe a chemical platform based on amino-substituted benzoselenadiazoles to build photoactivatable probes that mimic native metabolites as indicators of disease onset and progression. Through a series of synthetic derivatives, we have identified the key chemical groups in the benzoselenadiazole scaffold responsible for its photodynamic activity, and subsequently designed photosensitive metabolic warheads to target cells associated with various diseases, including bacterial infections and cancer. We demonstrate that versatile benzoselenadiazole metabolites can selectively kill pathogenic cells - but not healthy cells - with high precision after exposure to non-toxic visible light, reducing any potential side effects in vivo. This chemical platform provides powerful tools to exploit cellular metabolic signatures for safer therapeutic and surgical approaches.

Selenium substitution effects on excited-state properties and photophysics of uracil: a MS-CASPT2 study.

The photophysics of selenium-substituted nucleobases has attracted recent experimental attention because they could serve as potential photosensitizers in photodynamic therapy. Herein, we present a comprehensive MS-CASPT2 study on the spectroscopic and excited-state properties, and photophysics of 2-selenouracil (2SeU), 4-selenouracil (4SeU), and 2,4-selenouracil (24SeU). Relevant minima, conical intersections, crossing points, and excited-state relaxation paths in the lowest five electronic states (i.e., S0, S1, S2, T2, and T1) are explored. On the basis of these results, their photophysical mechanisms are proposed. Upon photoirradiation to the bright S2 state, 2SeU quickly relaxes to its S2 minimum and then moves in an essentially barrierless way to a nearby S2/S1 conical intersection near which the S1 state is populated. Next, the S1 system arrives at an S1/T2/T1 intersection where a large S1/T1 spin-orbit coupling of 430.8 cm-1 makes the T1 state populated. In this state, a barrier of 6.8 kcal mol-1 will trap 2SeU for a while. In parallel, for 4SeU or 24SeU, the system first relaxes to the S2 minimum and then overcomes a small barrier to approach an S2/S1 conical intersection. Once hopping to the S1 state, there exists an extended region with very close S1, T2, and T1 energies. Similarly, a large S1/T1 spin-orbit coupling of 426.8 cm-1 drives the S1→ T1 intersystem crossing process thereby making the T1 state populated. Similarly, an energy barrier heavily suppresses electronic transition to the S0 state. The present work manifests that different selenium substitutions on uracil can lead to a certain extent of different vertical and adiabatic excitation energies, excited-state properties, and relaxation pathways. These insights could help understand the photophysics of selenium-substituted nucleobases.

Poly(selenoviologen)-Assembled Upconversion Nanoparticles for Low-Power Single-NIR Light-Triggered Synergistic Photodynamic and Photothermal Antibacterial Therapy.

The development of a highly effective photosensitizer (PS) that can be activated with a low-power single light is a pressing issue. Herein, we report a PS for synergistic photodynamic and photothermal therapy constructed through self-assembly of poly(selenoviologen) on the surface of core-shell NaYF4:Yb/Tm@NaYF4 upconversion nanoparticles. The hybrid UCNPs/PSeV PS showed strong ROS generation ability and high photothermal conversion efficiency (∼52.5%) under the mildest reported-to-date irradiation conditions (λ = 980 nm, 150 mW/cm2, 4 min), leading to a high efficiency in killing methicillin-resistant Staphylococcus aureus (MRSA) both in vitro and in vivo. Remarkably, after intravenous injection, the reported PS accumulated preferentially in deep MRSA-infected tissues and achieved an excellent therapeutic index. This PS design realizes a low-power single-NIR light-triggered synergistic phototherapy and provides a simple and versatile strategy to develop safe clinically translatable agents for efficient treatment of deep tissue bacterial inflammations.

Near-infrared light-responsive alginate hydrogels based on diselenide-containing cross-linkage for on demand degradation and drug release.

A biodegradable, near-infrared (NIR) - responsive hydrogel is one of the most promising strategies as a remotely triggered drug carrier. In this study, novel NIR-responsive hydrogels based on alginate structures were prepared for controllable drug release. The hydrogels were formed rapidly by reacting norbornene-functionalized alginates and tetrazine cross-linkers containing diselenide bonds via inverse electron demand Diels-Alder click chemistry. In order to manipulate their properties, we prepared hydrogels with various cross-linking densities. NIR sensitive indocyanine green (ICG) and a drug, doxorubicin (DOX) were incorporated in the hydrogel matrix during gelation. The hydrogels showed a suppressed release profile under physiological conditions, while NIR light triggered a rapid release of DOX. Under NIR-light irradiation, ICG generated reactive oxygen species which could decompose diselenide bonds in the hydrogel matrix, inducing the gel-sol transition and release of entrapped DOX. The degradation of hydrogels could be also controlled by the ratio of the precursors.

Benzoselenadiazole-based responsive long-lifetime photoluminescent probes for protein kinases.

Benzoselenadiazole-containing inhibitors of protein kinases were constructed and their capability to emit phosphorescence in the kinase-bound state was established. Labelling of the inhibitors with a red fluorescent dye led to sensitive responsive photoluminescent probes for protein kinase CK2 that emitted red light with a long (microsecond-scale) decay time upon excitation of the probes with a pulse of near-UV light.

Thermal annealing effect on poly(3-hexylthiophene): fullerene:copper-phthalocyanine ternary photoactive layer.

We have fabricated poly(3-hexylthiophene) (P3HT)/copper phthalocyanine (CuPc)/fullerene (C60) ternary blend films. This photoactive layer is sandwiched between an indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT/PSS) photoanode and a bathocuproine (BCP)/aluminium photocathode. The thin films have been characterized by atomic force microscope (AFM) and ultraviolet/visible spectroscopy in order to study the influence of P3HT doping on the morphological and optical properties of the photoactive layer. We have also compared the I-V characteristics of three different organic solar cells: ITO/PEDOT:PSS/CuPc0.5:C600.5/BCP/Al and ITO/PEDOT:PSS/P3HT0.3:CuPc0.3:C600.4/BCP/Al with and without annealing. Both structures show good photovoltaic behaviour. Indeed, the incorporation of P3HT into CuPc:C60 thin film improves all the photovoltaic characteristics. We have also seen that thermal annealing significantly improves the optical absorption ability and stabilizes the organic solar cells making it more robust to chemical degradation.

Selenophene-thiophene block copolymer solar cells with thermostable nanostructures.

The nanostructure morphology and electron donor performance of a poly(3-hexylselenophene)-block-poly(3-hexylthiophene) (P3HS-b-P3HT) copolymer was studied in a photovoltaic device with a [6,6]-phenyl C61 butyric acid methyl ester (PCBM) acceptor. P3HS-b-P3HT forms fiberlike nanostructures spontaneously, which leads to an initial optimal device performance. Furthermore the nanostructure morphology is not greatly affected by annealing, which leads to a device stability that outperforms P3HT, P3HS, or a P3HS/P3HT mixture under identical conditions. External quantum efficiency, hole mobility, and current-voltage measurements show that the block copolymer also outperforms a ternary blend that consists of a physical mixture of P3HS, P3HT, and PCBM with the same overall composition. Overall, the observation of optimal device performance and morphology without annealing as well as enhanced thermal stability demonstrates the advantage of fully conjugated diblock copolymers in nanostructured devices.

Directed crystallization of poly(3-hexylthiophene) in micrometre channels under confinement and in electric fields.

We present two methods for controlling the in-plane alignment of polymer chains in poly(3-hexylthiophene) (P3HT) films within the channel of a field effect transistor device. Solvent-induced dewetting into the transistor channels of a prepatterned, bottom-gate bottom-contact transistor channel followed by controlled, low nucleation density recrystallization under confinement resulted in a preferential orientation of the π-stacked nanocrystalline lamellae parallel to the resulting P3HT micrometre-sized lines. The contrasting alignment, of perpendicular lamellae, was induced by application of an electric field during recrystallization. Preliminary measurements of the dependence of charge transport mobility on the global orientation of the polymer chain direction are consistent with faster charge transport perpendicular to the π-stacked lamellae (direction parallel to the polymer chains) compared to along the π-stacking direction in the common edge-on oriented morphology.

Ternary photovoltaic blends incorporating an all-conjugated donor-acceptor diblock copolymer.

We present a new fully conjugated diblock copolymer, P3HT-b-PFTBTT, containing donor and acceptor blocks with suitably positioned energy levels for use in a solar cell. This is the first block copolymer to be based on an existing high-performance polymer:polymer blend. We observe phase separation of the blocks and self-assembly behavior. In ternary blends with the respective homopolymers the diblock copolymer introduces lateral nanostructure without restricting P3HT crystallization in the charge transport direction, resulting in standing lamellae. By adding the diblock to the homopolymer blend as a compatibilizer, we prevent phase separation at elevated temperatures and benefit from a dramatic increase in P3HT ordering, allowing us to demonstrate polymer blend photovoltaics where the nanostructure is thermodynamically, rather than kinetically, controlled.

Incomplete exciton harvesting from fullerenes in bulk heterojunction solar cells.

We investigate the internal quantum efficiencies (IQEs) of high efficiency poly-3-hexylthiophene:[6,6]-phenyl-C(61)-butyric acid methyl ester (P3HT:PCBM) solar cells and find them to be lower at wavelengths where the PCBM absorbs. Because the exciton diffusion length in PCBM is too small, excitons generated in PCBM decay before reaching the donor-acceptor interface. This result has implications for most state of the art organic solar cells, since all of the most efficient devices use fullerenes as electron acceptors.

Enhancement of the photovoltaic performance in PbS nanocrystal:P3HT hybrid composite devices by post-treatment-driven ligand exchange.

A methodology for achieving versatile and facile ligand exchange by post-fabrication chemical treatment in PbS nanocrystal:poly(3-hexylthiophene) (P3HT) hybrid composite photovoltaic devices is demonstrated. We report a considerable improvement of the photovoltaic performance after post-fabrication chemical treatment using acetic acid to produce PbS nanocrystals surrounded by short-length ligands. Annealing induced morphological and photovoltaic performance changes in the resulting composite devices were investigated as a function of the annealing time.

Nanofibrillar self-organization of regioregular poly(3-hexylthiophene) and [6,6]-phenyl C(61)-butyric acid methyl ester by dip-coating: a simple method to obtain efficient bulk heterojunction solar cells.

In this paper the dip-coating technique has been investigated as a method for the production of regioregular poly(3-hexylthiophene) (RR-P3HT):[6,6]-phenyl C(61)-butyric acid methyl ester (PCBM)-based solar cells. We found that the utilization of the dip-coating technique for the RR-P3HT:PCBM system can facilitate its self-assembly into a nanofibrillar lamellar structure after evaporation of the solvent. The condition for the formation of the nanofibrillar structures leads to a power conversion efficiency of 3.6% by using only this approach without thermal treatment.

Hybrid solar cells from P3HT and silicon nanocrystals.

We are reporting new hybrid solar cells based on blends of silicon nanocrystals (Si NCs) and poly-3(hexylthiophene) (P3HT) polymer in which a percolating network of the nanocrystals acts as the electron-conducting phase. The properties of composite Si NCs/P3HT devices made by spin-coating Si NCs and P3HT from a common solvent were studied as a function of Si NC size and Si NC/P3HT ratio. The open-circuit voltage and short-circuit current are observed to depend on the Si NC size due to changes in the bandgap and surface-area-to-volume ratio. Under simulated one-sun A.M. 1.5 direct illumination (100 mW/cm2), devices made with 35 wt % Si NCs 3-5 nm in size showed 1.15% power conversion efficiency.