Versatile MXene composite probe-mediated homogeneous electrochemiluminescence biosensor with integrated signal transduction and near-infrared modulation strategy for concanavalin A detection.

Based on the highly specific interaction between concanavalin A (Con A) and glucose (Glu), a competitive electrochemiluminescence (ECL) biosensor was constructed for ultrasensitive detection of Con A. Nanocomposites with excellent electrocatalytic and photothermal properties were obtained by covalently bonding zinc oxide quantum dots (ZnO QDs) to vanadium carbide MXene (V2C MXene) surfaces. The modification of ZnO QDs hinders the aggregation of V2C MXene and increases the catalytic activity of oxygen reduction reaction, thus amplifying the luminol cathodic emission. In addition, the excellent photothermal performance of the V2C MXene-ZnO QDs can convert light energy into heat energy under the irradiation of 808 nm near infrared laser, thus increasing the temperature of the reaction system and accelerating the electron transfer process to realize the synergistic amplified homogeneous ECL system. This innovative work not only enriches the fundamental research on multifunctional MXene nanomaterials for biosensing, but also provides an effective strategy for ECL signal amplification.

Concurrent Vibrational Circular Dichroism Measurements with Infrared Spectroscopic Imaging.

Vibrational circular dichroism (VCD) spectroscopy has emerged as a powerful platform to quantify chirality, a vital biological property that performs a pivotal role in the metabolism of life organisms. With a photoelastic modulator (PEM) integrated into an infrared spectrometer, the differential response of a sample to the direction of circularly polarized light can be used to infer conformation handedness. However, these optical components inherently exhibit chromatic behavior and are typically optimized at discrete spectral frequencies. Advancements of discrete frequency infrared (DFIR) spectroscopic microscopes in spectral image quality and data throughput are promising for use toward analytical VCD measurements. Utilizing the PEM advantages incorporated into a custom-built QCL microscope, we demonstrate a point scanning VCD instrument capable of acquiring spectra rapidly across all fingerprint region wavelengths in transmission configuration. Moreover, for the first time, we also demonstrate the VCD imaging performance of our instrument for site-specific chirality mapping of biological tissue samples. This study offers some insight into future possibilities of examining small, localized changes in tissue that have major implications for systemic diseases and their progression, while also laying the groundwork for additional modeling and validation in advancing the capability of VCD spectroscopy and imaging.

An electrochemiluminescence biosensor based on boron nitride quantum dots as novel coreactant for quantitative determination of concanavalin A.

An electrochemiluminescence (ECL) analytical platform is constructed based on boron nitride quantum dots (BNQDs) as a novel coreactant of luminol for quantitative assay of concanavalin A (Con A). Different from previous research that mainly focuses on its superior optical properties, BNQDs are used for the first time as a coreactant for boosting ECL intensity of luminol, which has a 10-fold enhancement compared with individual poly(luminol/aniline) nanorods loaded on reduced graphene oxide (PLA-rGO) using GCE. On the basis that BNQDs contain an abundance of active amino, a possible mechanism of amino oxidation facilitating ECL emission is proposed. Firstly, luminol as light spices are oxidized to luminol•- and BNQDs generate an abundance of BNQDs-NH+• via electrochemical oxidization, producing reductive intermediates BNQDs-N• in alkaline conditions. Finally, BNQDs-N• react with luminol•- to obtain the excited species AP2-*, returning to ground state and emitting light. Due to the hindrance effect of Con A, the ECL intensity decreases gradually as various concentrations of Con A are modifying the electrode surface. Therefore, a sensitive ECL biosensor for detecting Con A is constructed exhibiting a wide linear range of 1.0 pg·mL-1 to 1.0 µg·mL-1 and a low detection limit of 0.15 pg·mL-1. Graphical abstract Schematic representation of an electrochemiluminescence (ECL) biosensor based on boron nitride quantum dots (BNQDs) as an efficient coreactant of reduced graphene oxide functionalized poly(luminol/aniline) (PLA-rGO) for quantitative assay of concanavalin A (Con A).

Collision-Induced Unfolding Studies of Proteins and Protein Complexes using Drift Tube Ion Mobility-Mass Spectrometer.

Elucidating the structures and stabilities of proteins and their complexes is paramount to understanding their biological functions in cellular processes. Native mass spectrometry (MS) coupled with ion mobility spectrometry (IMS) is emerging as an important biophysical technique owing to its high sensitivity, rapid analysis time, and ability to interrogate sample complexity or heterogeneity and the ability to probe protein structure dynamics. Here, a commercial IMS-MS platform has been modified for static native ESI emitters and an extended mass-to-charge range (20 kDa m/z) and its performance capabilities and limits were explored for a range of protein and protein complexes. The results show new potential for this instrument platform for studies of large protein and protein complexes and provides a roadmap for extending the performance metrics for studies of even larger, more complex systems, namely, membrane protein complexes and their interactions with ligands.

High-Field Asymmetric Waveform Ion Mobility Spectrometry and Native Mass Spectrometry: Analysis of Intact Protein Assemblies and Protein Complexes.

High-field asymmetric waveform ion mobility spectrometry (FAIMS) enables the separation of ions on the basis of their differential mobility in an asymmetric oscillating electric field. We, and others, have previously demonstrated the benefits of FAIMS for the analysis of peptides and denatured proteins. To date, FAIMS has not been integrated with native mass spectrometry of folded proteins and protein complexes, largely due to concerns over the heating effects associated with the high electric fields employed. Here, we demonstrate the newly introduced cylindrical FAIMS Pro device coupled with an Orbitrap Eclipse enables analysis of intact protein assemblies up to 147 kDa. No evidence for dissociation was detected suggesting that any field heating is insufficient to disrupt the noncovalent interactions governing these assemblies. Moreover, the FAIMS device was integrated into native liquid extraction surface analysis (LESA) MS of protein assemblies directly from thin tissue sections. Intact tetrameric hemoglobin (64 kDa) and trimeric reactive intermediate deiminase A (RidA, 43 kDa) were detected. Improvements in signal-to-noise of between 1.5× and 12× were observed for these protein assemblies on integration of FAIMS.

Ion Mobility and Surface Collisions: Submicrometer Capillaries Can Produce Native-like Protein Complexes.

The use of submicrometer capillaries for nanoelectrospray ionization of native proteins and protein complexes effectively reduces the number of nonspecific salt adducts to biological molecules, therefore increasing the apparent resolution of a mass spectrometer without any further instrument modifications or increased ion activation. However, the increased interaction between proteins and the surface of the capillary has been shown to promote protein expansion and therefore loss of native structure. Here, we compare the effect of micrometer and submicrometer sized capillaries on the native structures of the protein complexes streptavidin, concanavalin A, and C-reactive protein under charge reducing conditions. We observe that the use of submicrometer capillaries did not result in a significantly higher charge state distribution, indicative of expansion, when compared to micrometer sized capillaries for complexes in 100 mM ammonium acetate and 100 mM triethylammonium acetate and for streptavidin in 200 mM ammonium acetate with no charge reduction. Additionally, no significant differences in collision cross sections were observed using ion mobility mass spectrometry. Finally, the dissociation behaviors of protein complexes ionized using micrometer and submicrometer capillaries were compared to determine if any structural perturbation occurred during ionization. Protein complexes from both capillary sizes displayed similar surface-induced dissociation patterns at similar activation energies. The results suggest that submicrometer capillaries do not result in significant changes to protein complex structure under charge reducing conditions and may be used for native mass spectrometry experiments. Submicrometer capillaries can be used to resolve small mass differences of biological systems on a QTOF platform; however, a laser tip puller is required for pulling reproducible submicrometer capillaries, and disruption in spray due to clogging was observed for larger protein complexes.

Enhanced electrochemiluminescence of luminol based on Cu2O-Au heterostructure enabled multiple-amplification strategy.

Herein, a credible construction strategy to improve electrochemiluminescence (ECL) of luminol was developed based on Cu2O-Au heterostructures. Summarily, gold nanoparticles (AuNPs) were anchored on surface of Cu2O nanocube (Cu2O@AuNPs) by spontaneous reduction reaction. Then, luminol molecules were concentrated on Cu2O@AuNPs using L-Cysteine (Cys) as covalent linkage to build the composite emitter (Cu2O@AuNPs-Cys-luminol). The enhancement mechanism was realized by following aspects: (I) Cu2O@AuNPs worked as electrocatalyst for glucose to generate coreactant of H2O2 in situ, avoiding the instability of direct addition of H2O2. (II) luminol molecules were firmly attached on Cu2O@AuNPs to achieve centralized and strong luminescence at low consumption. (III) Cys acted as an intramolecular coreactant and directly linked to luminol to increase luminous efficiency. To validate the effectiveness, a sandwiched immunoassay was built using concanavalinA (ConA) as analyte. Electroreduced graphene film as substrate provided phenoxy-derivatized dextran (DexP) with abundant binding sites and improved conductivity. To improve the specificity, DexP was used to identify ConA via the specific carbohydrate-ConA interaction. Then, Cu2O@AuNPs-Cys-luminol was modified on electrode as ECL signal indicator. The ECL immunosensor achieved determination of ConA with low detection limit of 2.9 × 10-5 ng/mL and excellent stability of continuous potential scan for 8 cycles. Experimental results demonstrated that the proposed construction strategy made considerable progress in ECL efficiency and stability of luminol. The creational pattern of construction strategy achieves high detection capabilities to ConA and expands the applicability of luminol in ECL system. It is expected to have more potential application value in immunoassay with universality.

Multivalent binding of concanavalin A on variable-density mannoside microarrays.

Interactions between cell surface glycans and glycan binding proteins (GBPs) have a central role in the immune response, pathogen-host recognition, cell-cell communication, and a myriad other biological processes. Because of the weak association between GBPs and glycans in solution, multivalent and cooperative interactions in the dense glycocalyx have an outsized role in directing binding affinity and selectivity. However, a major challenge in glycobiology is that few experimental approaches exist for examining and understanding quantitatively how glycan density affects avidity with GBPs, and there is a need for new tools that can fabricate glycan arrays with the ability to vary their density controllably and systematically in each feature. Here, we use thiol-ene reactions to fabricate glycan arrays using a recently developed photochemical printer that leverages a digital micromirror device and microfluidics to create multiplexed patterns of immobilized mannosides, where the density of mannosides in each feature was varied by dilution with an inert spacer allyl alcohol. The association between these immobilized glycans and FITC-labeled concanavalin A (ConA) - a tetrameric GBP that binds to mannosides multivalently - was measured by fluorescence microscopy. We observed that the fluorescence decreased nonlinearly with increasing spacer concentration in the features, and we present a model that relates the average mannoside-mannoside spacing to the abrupt drop-off in ConA binding. Applying these recent advances in microscale photolithography to the challenge of mimicking the architecture of the glycocalyx could lead to a rapid understanding of how information is trafficked on the cell surface.

Biopolymer monolith for protein purification.

Porous glycopolymers, "glycomonoliths", were prepared by radical polymerization based on polymerization-induced phase separation with an acrylamide derivative of α-mannose, acrylamide and cross-linker in order to investigate protein adsorption and separation. The porous structure was induced by a porogenic alcohol. The pore diameter and surface area were controlled by the type of alcohol. The protein adsorption was measured in both batch and continuous flow systems. The glycomonoliths showed specific interaction with the sugar recognition protein of concanavalin A, and non-specific interaction to other proteins was negligible. The amount of protein adsorption to the materials was determined by the sugar density and the composition of the glycomonoliths. Fundamental knowledge regarding the glycomonoliths for protein separation was obtained.

One-pot synthesis of thermosensitive glycopolymers grafted gold nanoparticles and their lectin recognition.

Thermosensitive glucose-functionalized glycopolymers grafted gold nanoparticles (Glyco@GNPs) with good colloidal stability and thermosensitive in aqueous solution were fabricated by reversible addition-fragmentation chain transfer (RAFT) mediated one-pot synthesis. The formation of core-shell morphology with about a 60 nm gold core in diameter and a glycopolymer shell of about 80 nm in thickness was indicated by transmission electron microscopy (TEM). The recognition ability of the Glyco@GNPs toward lectin concannavalin A (Con A) was verified by ultraviolet-visible spectroscopy and dynamic light scattering (DLS). The good cytocompatibility of the glycopolymers and Glyco@GNPs was proven by MTT assay on L-929 cells. Glyco@GNPs could effectively inhibit hepatoma cells SMMC-7721 growth after recognizing Con A was also proved by MTT assay and flow cytometry assay.

A ratiometric electrochemiluminescent biosensor for Con A detecting based on competition of dissolved oxygen.

A novel ratiometric electrochemiluminescent (ECL) biosensor was designed for the detection of concanavalin A (Con A) based on two ECL emitters competing for the dissolved oxygen (O2). In this strategy, CdTe quantum dots (QDs) were used as the cathodic emitter and N-(aminobutyl)-N-(ethylisoluminol) (ABEI) was used as the anodic emitter. With the presence of dissolved O2 utilized as co-reactant, CdTe QDs showed an ECL emission at - 1.7 V, and ABEI showed an emission at + 0.6 V. Phenoxy-derivatized dextran (Dexp), as a recognition element, was immobilized by graphene oxide functionalized CdTe QDs (G-CdTe QDs) to recognize Con A, and further combine with Dexp, gold and platinum nanoparticles decorated ABEI (Dexp-Au-Pt-ABEI) to form a sandwich structure. With the increasing concentration of analyte Con A, the ECL signal of cathodic CdTe QDs decreased and the anodic response of ABEI increased, thus achieving a ratiometry detection of Con A with a wide linear range from 1.0 × 10-4 ng/mL to 10 ng/mL. The detection limit was low to 3.0 × 10-5 ng/mL. This proposed ratiometric ECL biosensor not only conquered the false errors caused by external interferences, but excluded the disability caused by exogenous co-reactant via the application of common dissolved O2. It also exhibited an excellent stability, selectivity and reproducibility.

Lectin- and Saccharide-Functionalized Nano-Chemiresistor Arrays for Detection and Identification of Pathogenic Bacteria Infection.

Improvement upon, and expansion of, diagnostic tools for clinical infections have been increasing in recent years. The simplicity and rapidity of techniques are imperative for their adoption and widespread usage at point-of-care. The fabrication and evaluation of such a device is reported in this work. The use of a small bioreceptor array (based on lectin-carbohydrate binding) resulted in a unique response profile, which has the potential to be used for pathogen identification, as demonstrated by Principal Component Analysis (PCA). The performance of the chemiresistive device was tested with Escherichia coli K12, Enterococcus faecalis, Streptococcus mutans, and Salmonella typhi. The limits of detection, based on concanavalin A (conA) lectin as the bioreceptor, are 4.7 × 10³ cfu/mL, 25 cfu/mL, 7.4 × 104 cfu/mL, and 6.3 × 10² cfu/mL. This shows that the detection of pathogenic bacteria is achieved with clinically relevant concentrations. Importantly, responses measured in spiked artificial saliva showed minimal matrix interference. Furthermore, the exploitation of the distinctive outer composition of the bacteria and selectivity of lectin-carbohydrate interactions allowed for the discrimination of bacterial infections from viral infections, which is a current and urgent need for diagnosing common clinical infections.

Glycosylated Peptoid Nanosheets as a Multivalent Scaffold for Protein Recognition.

Glycoproteins adhered on the cellular membrane play a pivotal role in a wide range of cellular functions. Their importance is particularly relevant in the recognition process between infectious pathogens (such as viruses, bacteria, toxins) and their host cells. Multivalent interactions at the pathogen-cell interfaces govern binding events and can result in a strong and specific interaction. Here we report an approach to mimic the cell surface presentation of carbohydrate ligands by the multivalent display of sugars on the surface of peptoid nanosheets. The constructs provide a highly organized 2D platform for recognition of carbohydrate-binding proteins. The sugars were displayed using different linker lengths or within loops containing 2-6 hydrophilic peptoid monomers. Both the linkers and the loops contained one alkyne-bearing monomer, to which different saccharides were attached by copper-catalyzed azide-alkyne cycloaddition reactions. Peptoid nanosheets functionalized with different saccharide groups were able to selectively bind multivalent lectins, Concanavalin A and Wheat Germ Agglutinin, as observed by fluorescence microscopy and a homogeneous Förster resonance energy transfer (FRET)-based binding assay. To evaluate the potential of this system as sensor for threat agents, the ability of functionalized peptoid nanosheets to bind Shiga toxin was also studied. Peptoid nanosheets were functionalized with globotriose, the natural ligand of Shiga toxin, and the effective binding of the nanomaterial was verified by the FRET-based binding assay. In all cases, evidence for multivalent binding was observed by systematic variation of the ligand display density on the nanosheet surface. These cell surface mimetic nanomaterials may find utility in the inactivation of pathogens or as selective molecular recognition elements.

Functionalized gold nanoparticles as affinity nanoprobes for multiple lectins.

Glycan-lectin interactions are commonly observed in nature. Analytical methods, which are used to detect lectins that rely on the use of glycan ligand-modified nanoprobes as affinity probes, have been developed. Most of the existing methods are focused on the use of synthetic glycan ligands. Nevertheless, naturally available glycoproteins, such as ovalbumin in chicken egg whites, are good sources for fabricating glycan-immobilized nanoprobes. In this study, we generated functionalized gold nanoparticles (Au NPs) from a one-pot reaction by reacting chicken egg white (cew) proteins with aqueous tetrachloroaurate. The generated Au@cew NPs are mainly encapsulated by ovalbumin, in which the surface is decorated by abundant hybrid mannose and Galß(1→4)GlcNAc-terminated glycan ligands. Thus, the generated Au@cew NPs containing hybrid mannose and Galß(1→4)GlcNAc have the capability to selectively bind with their corresponding lectins. Lectins including concanavalin A, banana lectin, and ricin B that have binding moieties toward specific sugars were used as the model samples. Our results showed that the generated AuNPs can be used as multiplex affinity probes for these model lectins. Lectins can be selectively released from the Au@cew NP-lectin conjugates by using specific sugars, such as mannose, glucose, and ß-lactose, as the releasing agents to release specific lectins from the conjugates. Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) was used as the tool to characterize the released species from the nanoprobes. The limit of detection of these model lectins using the current approach was low (in nM). The feasibility of using the Au@cew NP-based affinity MALDI-MS to selectively detect specific lectins from complex samples was also demonstrated.

A novel ECL biosensor for the detection of concanavalin A based on glucose functionalized NiCo2S4 nanoparticles-grown on carboxylic graphene as quenching probe.

An electrochemiluminescence (ECL) biosensor was developed for detection of Concanavalin A (Con A). Chitosan/Ru(bpy)32+/silica/Fe3O4 nanomaterials (CRuSi-Fe3O4) were synthesized through W/O microemulsion route. The added Fe3O4 nanoparticles can simplify the prepared process and enhance the conductivity of nanomaterials which can increase the ECL intensity of luminophor CRuSi-Fe3O4. In addition, the layered structure of CRuSi-Fe3O4 can immobilize lots of Con A using glutaraldehyde as the coupling agent which can improve the sensitivity of the biosensor. Then the quenching probe glucose functionalized NiCo2S4 nanoparticles-grown on carboxylic graphene (NiCo2S4-COOH-rGO@Glu) was anchored on the modified-electrode via the specific carbohydrate-Con A interaction. Here, NiCo2S4 was used to quench the ECL of CRuSi-Fe3O4, graphene was used to grow NiCo2S4 nanoparticles as carrier materials and glucose was served as the recognition element for bounding Con A. Therefore, a desirable quenching ECL signal was measured with S2O82- as the coreactant of CRuSi-Fe3O4. Under the optimization of determination conditions, a linear response range for Con A from 0.5pgmL-1 to 100ngmL-1 was obtained, and the detection limit was calculated to be 0.18pgmL-1 (S/N=3).

Moderate reagent mixing on an orbital shaker reduces the incubation time of enzyme-linked immunosorbent assay.

Rapid diagnostic tests can be developed using ELISA for detection of diseases in emergency conditions. Conventional ELISA takes 1-2 days, making it unsuitable for rapid diagnostics. Here, we report the effect of reagents mixing via shaking or vortexing on the assay timing of ELISA. A 48-min protocol of ELISA involving 12-min incubations with reagent mixing at 750 rpm for every step was optimized. Contrary to this, time-optimized control ELISA performed without mixing produced similar results in 8 h, leaving a time gain of 7 h using the developed protocol. Collectively, the findings suggest the development of ELISA-based rapid diagnostics.

An ultrasensitive electrochemiluminescence biosensor for the detection of concanavalin A based on Au nanoparticles-thiosemicarbazide functionalized PtNi nanocubes as signal enhancer.

A sandwich-configuration electrochemiluminescence (ECL) biosensor was constructed for detecting concanavalin A (ConA) based on peroxydisulfate/oxygen (S2O82-/O2) system. In this work, the gold nanoflower modified Zn-doped SnO2 was used as a substrate to adsorb recognition element horseradish peroxidase (HRP) for binding ConA. Then, Au nanoparticles-thiosemicarbazide functionalized PtNi nanocubes (AuNPs-TSC-PtNi NCs), as a novel ECL signal tracer, were incubated onto the electrode through a specific carbohydrate-ConA interaction, thus achieving a sandwiched structure. The integration of amplifying effect of both TSC and PtNi NCs on the ECL of S2O82-/O2 system endowed the biosensor a high sensitivity. The linear range for ConA detection was from 0.0010ng/mL to 10ng/mL with a detection limit of 0.0002ng/mL (S/N=3).

A nonionic surfactant-decorated liquid crystal sensor for sensitive and selective detection of proteins.

Proteins are responsible for most biochemical events in human body. It is essential to develop sensitive and selective methods for the detection of proteins. In this study, liquid crystal (LC)-based sensor for highly selective and sensitive detection of lysozyme, concanavalin A (Con A), and bovine serum albumin (BSA) was constructed by utilizing the LC interface decorated with a nonionic surfactant, dodecyl ß-d-glucopyranoside. A change of the LC optical images from bright to dark appearance was observed after transferring dodecyl ß-d-glucopyranoside onto the aqueous/LC interface due to the formation of stable self-assembled surfactant monolayer, regardless of pH and ion concentrations studied in a wide range. The optical images turned back from dark to bright appearance after addition of lysozyme, Con A and BSA, respectively. Noteworthy is that these proteins can be further distinguished by adding enzyme inhibitors and controlling incubation temperature of the protein solutions based on three different interaction mechanisms between proteins and dodecyl ß-d-glucopyranoside, viz. enzymatic hydrolysis, specific saccharide binding, and physical absorption. The LC-based sensor decorated with dodecyl ß-d-glucopyranoside shows high sensitivity for protein detection. The limit of detection (LOD) for lysozyme, Con A and BSA reaches around 0.1 µg/mL, 0.01 µg/mL and 0.001 µg/mL, respectively. These results might provide new insights into increasing selectivity and sensitivity of LC-based sensors for the detection of proteins.

Electrochemical sensing of concanavalin A and ovalbumin interaction in solution.

In an attempt to develop a label- and reagent-free electrochemical method for the detection of lectin-glycoprotein interactions, we tested lectin-concanavalin A (ConA), glycoprotein-ovalbumin (Ova) and their complex using chronopotentiometric stripping (CPS) analysis and a hanging mercury drop electrode. Incubation of ConA with Ova resulted in an increase of the CPS peak H of the complex as compared to the CPS peaks of individual Ova and ConA proteins. Qualitatively similar results were obtained with other glycoprotein-lectin couples (ConA-RNase B and lectin from Sambucus nigra-fetuin). Using the CPS method, we were able to follow the course of complex formation in solution. Comparable responses of Ova, ConA and ConA-Ova complex were obtained not only at the mercury electrode but also with solid amalgam electrodes, which are more suitable for parallel analysis. It can be anticipated that electrochemical methods, namely CPS, will find application in glycomics and proteomics.

A label-free fluorescence biosensor for highly sensitive detection of lectin based on carboxymethyl chitosan-quantum dots and gold nanoparticles.

In this work, we report a novel label-free fluorescence "turn off-on" biosensor for lectin detection. The highly sensitive and selective sensing system is based on the integration of carboxymethyl chitosan (CM-CHIT), CuInS2 quantum dots (QDs) and Au nanoparticles (NPs). Firstly, CuInS2 QDs featuring carboxyl groups were directly synthesized via a hydrothermal synthesis method. Then, the carboxyl groups on the CuInS2 QDs surface were interacted with the amino groups (NH2), carboxyl groups (COOH) and hydroxyl groups (OH) within CM-CHIT polymeric chains via electrostatic interactions and hydrogen bonding to form CM-CHIT-QDs assemblies. Introduction of Au NPs could quench the fluorescence of CM-CHIT-QDs through electron and energy transfer. In the presence of lectin, lectin could bind exclusively with CM-CHIT-QDs by means of specific multivalent carbohydrate-protein interaction. Thus, the electron and energy transfer process between CM-CHIT-QDs and Au NPs was inhibited, and as a result, the fluorescence of CM-CHIT-QDs was effectively "turned on". Under the optimum conditions, there was a good linear relationship between the fluorescence intensity ratio I/I0 (I and I0 were the fluorescence intensity of CM-CHIT-QDs-Au NPs in the presence and absence of lectin, respectively) and lectin concentration in the range of 0.2-192.5 nmol L(-1), And the detection limit could be down to 0.08 nmol L(-1). Furthermore, the proposed biosensor was employed for the determination of lectin in fetal bovine serum samples with satisfactory results.