[The efficacy of iRoot BP plus in the treatment of adult carious pulp exposure and its impact on pulp blood flow].

PURPOSE: To explore the efficacy of iRoot BP plus in the treatment of adult carious pulp exposure and its impact on pulp blood flow. METHODS: A total of 126 cases of 156 permanent teeth from adult patients with carious pulp exposure who were treated from January 2020 to January 2022 were selected, the patients were divided into experimental group(63 cases with 79 permanent teeth) and control group(63 cases with 77 permanent teeth) by the envelope method. The experimental group was treated with iRoot BP plus, while the control group was treated with mineral trioxide polymer. The differences in treatment effectiveness, operation time, and tooth discoloration between the two groups were observed. Statistical analysis was performed with SPSS 22.0 software package. RESULTS: There was no significant difference in treatment success rates between the experimental group and the control group at 3, 6, and 12 months after surgery(P＞0.05). The operating time for each capsule in the experimental group was (2.53±0.41) min, which was significantly shorter than that in the control group(P＜0.05). The incidence of tooth discoloration in the experimental group at 12 months after surgery was 3.80%, which was significantly lower than that in the control group (P＜0.05). The bite force quotient and masticatory efficiency of the experimental group 12 months after operation were (16.65±1.14) Ibs and (94.45±5.65)%, which were significantly higher than those of the control group(P＜0.05). CONCLUSIONS: IRoot BP plus has good efficacy in the treatment of adult carious pulp exposure, with advantages such as convenient operation, less tooth discoloration, less inflammatory reactions and stable pulp blood flow after decline.

Evaluation of staining potential of Silver Diamine Fluoride, Potassium Iodide, Nanosilver Fluoride: an in vitro study.

BACKGROUND: The black staining effect of silver-containing solutions for use to arrest caries can have a negative aesthetic impact on children and parents. This study aims to assess the staining effects of Silver Diamine Fluoride/Potassium Iodide (SDF/KI), SDF and Nanosilver Fluoride (NSF). MATERIALS AND METHODS: Forty-four extracted carious primary molars were collected and randomly divided into four groups (n = 11). The carious tissue in all teeth was removed using a chemo-mechanical caries removal agent with an excavator. After caries removal in all groups, SDF, SDF/KI, and NSF were applied to the different groups, while no solution was applied to the control group. Subsequently, the teeth in all groups were restored with compomer. Color values L*, a* and b* were measured using a spectrophotometer at three time points: immediately after compomer restoration (T0), one week later (T1), and four week later (T2). Changes in brightness (ΔL) and color (ΔE) over time were calculated and comparisons among groups were made. RESULTS: The SDF solution induced statistically significant black staining (p = 0.013) and a decrease in L* value (p < 0.001) on the compomer material compared to the other groups over time. CONCLUSIONS: It was observed that SDF/KI has the potential to reduce the black staining effect of SDF, though not entirely. Novel experimental solutions like NSF may offer an alternative to counteract the staining effect of SDF.

Stain removal, abrasion and anticaries properties of a novel low abrasion dentifrice containing micro-fibrillated cellulose: in vitro assessments.

OBJECTIVES: This laboratory study assessed the performance of a novel fluoride dentifrice containing micro-fibrillated cellulose (MFC) and entrapped silica. METHODS: Removal of extrinsic stains was assessed using the pellicle cleaning ratio (PCR) method, and radioactive dentin abrasivity (RDA) was measured, to calculate a cleaning efficiency index (CEI). Fluoride efficacy was evaluated using widely used remineralization and fluoride uptake methods. The test product (Protegera™) was compared to common dentifrices (Crest - Cavity Protection™ and ProHealth™, Sensodyne Pronamel™, Arm & Hammer™ Advanced Whitening, Crest ProHealth™, and Colgate Optic White™). RESULTS: The PCR for the MFC dentifrice (141) was comparable to three known marketed stain-removing dentifrices (Arm & Hammer™ Advanced Whitening, Crest ProHealth™, and Colgate Optic White™) but it had a significantly lower RDA (88 ± 6) than 5 other products. This gave it the highest CEI of the tested products (2.0). In a 10-day pH cycling study, the fluoride efficacy of the MFC product was comparable to Sensodyne Pronamel and Crest Cavity Protection. The MFC dentifrice was superior for promoting fluoride uptake into incipient enamel lesions compared to the USP reference dentifrice. CONCLUSION: The MFC dentifrice has low abrasion, but despite this, it is highly effective in removing stained pellicle. It also is an efficacious fluoride source when compared to relevant commercially available fluoride dentifrices with high dentin abrasivity. CLINICAL SIGNIFICANCE: The addition of micro-fibrillated cellulose to a fluoride dentifrice gives a low abrasive product that can effectively remove external stains, and serve as an effective fluoride source. This combination of benefits seems well suited to enamel protection and caries prevention.

Therapeutic solutions for discoloration of calcified teeth based on CBCT diagnosis.

Single tooth orange discoloration secondary to root canal calcification occurs as a consequence of dental trauma, orthodontic treatment, or for unknown rea- sons. A correct case history must be compiled and a CBCT study carried out in order to establish the diag- nosis and define the best treatment plan in each case. The aim of the present study was to offer a therapeutic protocol involving a clinical decision-making tree dia- gram based on the presence or absence of apical dis- ease and the degree of canal calcification. Dental bleaching and the use of ceramic veneers allow es- thetic restoration in such cases.

Digital Photocolorimetric Analysis of In Vitro Tooth Color Changes.

OBJECTIVE: Tooth color matching is challenging, and digital photocolorimetry using eLABor_aid (eLAB) provides objective evaluation through polarized photographs. However, its comparability with spectrophotometry remains unclear. METHODS AND MATERIALS: Bovine incisor root canals (n=30) were prepared to simulate an incomplete root apex. The teeth were randomly assigned to three groups based on intracanal medication: control (without medication); calcium hydroxide/propylene glycol; and triple-antibiotic paste (n=10 each). Tooth color was assessed using both eLAB and spectrophotometry. Measurements were taken at the crown medio-cervical region on five-time intervals (baseline, 1, 3, 7, and 14 days). Statistical analysis included two-way repeated-measures ANOVA, Sidak post hoc and Pearson's correlation test (α=0.05). RESULTS: No significant differences were observed between the two methods for either medication or follow-ups (p>0.05). Triple-antibiotic paste exhibited higher color variation (p<0.05). After 7 days, all groups presented significant color changes (p<0.05). Moderate to high correlations (R2 from 0.51 to 0.84, p<0.0001) were found between both methods for all groups at all intervals. CONCLUSION: The eLAB is a reliable method for detecting tooth color changes, and its results are comparable to spectrophotometry analysis.

Can a dentin bonding agent prevent color change in regenerative endodontic procedures? An in vitro evaluation.

This in vitro study aimed to determine the efficacy of dentin bonding agents in preventing color changes following Regenerative Endodontic Procedures. One hundred twenty bovine incisors were endodontically prepared and randomly assigned to a two main factors design: application of a dentin bonding agent (Scotchbond Adper, 3M ESPE, St Paul, MN, USA) in the pulp chamber (Group 1, n=60) versus no bonding intervention (Group 2, n=60), and five levels of intracanal medication (n=12/subgroup): Triple antibiotic paste (TAP), double antibiotic paste (DAB), calcium hydroxide (CH), modified triple antibiotic paste (TAPM), and Control (CTL). Color changes were measured over 28 days at multiple time points (1, 3, 7, 14, 21, and 28 days) using the CIEDE2000 formula to calculate the color difference (ΔE00) from baseline (T0). The ΔE00 quantifies the perceptible color difference between the initial and final tooth color, with lower values indicating less discoloration. The results were analyzed using repeated measures ANOVA-2 and post-hoc Holm-Sidak tests. The TAP subgroups, both with and without the bonding agent, exhibited the highest color variation. However, a pulp chamber seal with a bonding agent showed a protective effect against discoloration compared to no seal, even though complete prevention was not achieved. All groups demonstrated ΔE00 values beyond acceptable interpretation thresholds for clinical application, primarily driven by a reduction in lightness (L*) and a decrease in redness (a* value, shifting towards green). In conclusion, while the pulp chamber seal with a bonding agent mitigated TAP-induced discoloration, it did not eliminate it.

Effect of fluoride or chitosan toothpaste and at-home bleaching in enamel roughness, tooth color, and staining susceptibility.

PURPOSE: To evaluate how fluoride- or chitosan-based toothpaste used during at-home bleaching affects enamel roughness, tooth color, and staining susceptibility. METHODS: Bovine enamel blocks were submitted to a 14-day cycling regime considering a factorial design (bleaching agent x toothpaste, 2 x 3), with n=10: (1) bleaching with 16% carbamide peroxide (CP) or 6% hydrogen peroxide (HP), and (2) daily exposure of a fluoride (1,450 ppm F-NaF) toothpaste (FT), chitosan-based toothpaste (CBT), or distilled water (control). Then, 24 hours after the last day of bleaching procedure the samples were exposed to a coffee solution. Color (ΔEab, ΔE00, L*, a*, b*) and roughness (Ra, µm) analyses were performed to compare the samples initially (baseline), after bleaching, and after coffee staining. The results were evaluated by linear models for repeated measures (L*, a*, b*, and Ra), 2-way ANOVA (ΔEab, ΔE00) and Tukey's test (α= 0.05). RESULTS: After the at-home bleaching procedure (toothpaste vs. time, P< 0.0001), the toothpaste groups presented a statistically lower Ra than the control (CBT 0.05). After coffee exposure, CBT presented lower ΔEab and ΔE00 values in the HP groups (toothpaste, P< 0.0001), and lower b* and a* values in the CP groups (toothpaste vs. time, P= 0.004). CLINICAL SIGNIFICANCE: Fluoride or chitosan delivered by toothpaste can reduce surface alterations of the enamel during at-home bleaching, without affecting bleaching efficacy.

Evaluation of the effects of different photosensitizers used in antimicrobial photodynamic therapy on tooth discoloration: spectrophotometric analysis.

BACKGROUND: Tooth discoloration is a common concern in antimicrobial photodynamic therapy (aPDT) using various photosensitizers (PS). Toluidine Blue (TB), Methylene Blue (MB), Phthalocyanine (Pc), and 2-mercaptopyridine-substituted zinc phthalocyanine (TM-ZnPc) are among those studied, but their relative impacts on tooth discoloration remain unclear. AIM: This study aimed to compare the effects of TB, MB, Pc, and TM-ZnPc in aPDT on tooth discoloration, utilizing a controlled experimental setup. MATERIALS AND METHODS: The study comprised seventy-five single-rooted incisors with root canals. Following meticulous preparation, a standardized area on the crown surface was designated for examination, and precise measurements of the initial tooth colors were recorded. Samples were randomly divided into five groups: Negative control, MB, TM, Pc, and TM-ZnPc. Photoactivation was performed using LED light, and color measurements were taken at multiple time points up to 90 days. Data were converted to Lab* color values of the CIE Lab* color system (International Commission on Illumination, Vienna, Austria), and ΔE values were calculated. Statistical analysis was performed using Two-way ANOVA and Post-Hoc Tukey tests (p < 0.05). RESULTS: At day 7 and 30, TM-ZnPc and Pc caused less discoloration compared to MB and TB. TM-ZnPc caused more tooth discoloration compared to Pc (p < 0.05). Compared to baseline, MB and TM-ZnPc caused more tooth discoloration at 30 days and TB caused more tooth discoloration at 90 days (p < 0.05). No significant difference was observed in terms of tooth discoloration at all periods evaluated after Pc application (p > 0.05). All photosensitizers tested in the study caused tooth coloration. CONCLUSION: All PS induced clinically detectable tooth discoloration, with TB and MB causing more significant discoloration compared to Pc and TM-ZnPc at certain time points. TM-ZnPc and Pc demonstrated more stable coloration levels over time, suggesting their potential reliability in aPDT applications. This study highlights the importance of selecting appropriate PS to minimize tooth discoloration in aPDT, with Pc showing promise in this regard.

Over-the-counter products in tooth bleaching: A scoping review.

OBJECTIVE: To map and summarize the current scientific evidence concerning the active ingredients, effectiveness, and adverse effects of over-the-counter (OTC) bleaching products. DATA AND SOURCE: This study was conducted according to the PRISMA-ScR guidelines for scoping reviews and registered on the Open Science Framework platform. STUDY SELECTION: Database searches were conducted in PubMed/MEDLINE, Embase, and Scopus up to January 2024. All in vitro, in situ, and clinical studies evaluating the effectiveness and adverse effects of OTC bleaching products were included. A descriptive analysis of the included studies was performed. RESULTS: A total of 88 studies were included. Most of them were in vitro studies (n = 49), followed by randomized clinical trials (n = 28). The main OTC bleaching products identified were whitening or stain-removing toothpastes (n = 42), followed by whitening strips (n = 39). Most clinical studies indicate that whitening strips are effective in improving tooth color and providing whitening benefits. In contrast, the bleaching effectiveness of toothpastes, mouth rinses and whitening trays was mainly supported by in vitro studies. The main adverse effects associated with OTC bleaching agents were tooth sensitivity and gingival irritation. CONCLUSION: A wide variety of OTC bleaching products is available for consumer self-administered use. Clinical studies have mainly confirmed the bleaching effectiveness of whitening strips, while the validation for toothpastes, mouth rinses and whitening trays has mainly relied on in vitro studies. Nevertheless, the use of OTC bleaching products may result in adverse effects, including tooth sensitivity, gingival irritation, and enamel surface changes. CLINICAL SIGNIFICANCE: Some over-the-counter bleaching products may have whitening properties supported by clinical studies, particularly those containing hydrogen or carbamide peroxide. Nonetheless, clinicians must be aware of the potential risks associated with excessive self-administration of these products, which may result in adverse effects.

In vitro evaluation of the tooth bleaching efficacy and safety of high-concentration hydrogen peroxide with cold atmospheric plasma.

BACKGROUND: Using hydrogen peroxide (HP) for tooth bleaching may induce various side effects. Cold atmospheric plasma (CAP) is a promising solution. We aimed to evaluate and compare the efficacy and safety of tooth bleaching using high-concentration HP with CAP with conventional in-office bleaching. METHODS: Fifty-one discolored extracted human teeth were assigned to three groups: Group 1 (light-emitting diode with 35 % HP), Group 2 (CAP with 35 % HP), and Group 3 (only CAP). Bleaching was conducted over three sessions for a total of 20 min. The bleaching effect was evaluated based on the changes in color (ΔE00 and WID) and lightness (ΔL⁎ and ΔG). Safety was assessed by examining the dark areas on the enamel and monitoring the pulp chamber temperature. The study analyzed how different bleaching methods and durations affected ΔE00 and ΔWID using repeated-measures analysis of variance (ANOVA). The Kruskal-Wallis and Mann-Whitney tests were used for ΔL⁎ and dark areas, and one-way ANOVA for ΔG after 20 min of bleaching. RESULTS: The ΔE00 and WID demonstrated an interaction based on the bleaching method and time, with Group 1 exhibiting the highest ΔE00 and WID at all treatment times (p < 0.001). ΔL⁎ and ΔG did not differ significantly between Groups 1 and 2 (p = 0.056 and 0.062, respectively) and were lowest in Group 3 (p < 0.001). Group 1 exhibited the darkest areas and highest pulp chamber temperatures (p < 0.001). Group 1 exhibited statistically significant color changes. Group 2 demonstrated similar effects, but with enhanced safety profiles. CONCLUSIONS: Group 2, although displaying a slightly less pronounced color change compared with Group 1, achieved a color alteration readily discernible to the naked eye. This suggests that CAP with 35 % HP could be an interesting area for further investigation as an alternative to traditional in-office bleaching methods.

Bleaching versus color change resistant adhesive in the discoloration of bracket-bonded tooth surfaces: an in vitro study.

OBJECTIVES: The aim of this study was to compare the effect of office bleaching of teeth bonded with Transbond XTTM (3M Unitek, Monrovia, CA, USA) (TRXT) and the use of color change resistant Orthocem (FGM, Joinville, Brazil) in bracket bonding on coffee-induced enamel discoloration. MATERIALS AND METHODS: Eighty premolars were distributed in equal numbers (n = 20) to group 1 (TRXT + distilled water), group 2 (TRXT + coffee solution), group 3 (TRXT + coffee solution + bleaching), and group 4 (Orthocem + coffee solution). Color was measured using a SpectroShade Micro (MHT, International, Verona, Italy) device at the beginning (T0), after coloring (T1), after bleaching (T1B), and after debonding (T2). ΔE color change values were calculated as T1-T0, T1B-T0 and T2-T0 differences. The conformity of the data to the normal distribution was examined with the Shapiro-Wilk test. Multiple comparisons were made with Tamhane's T2 test and Tukey's HSD test using one-way analysis of variance in the comparison of normally distributed data, and multiple comparisons were made with Dunn's test using the Kruskal-Wallis H test for comparison of non-normally distributed data. The significance level was set at p < 0.050. RESULTS: A statistically significant (p < 0.001) difference was found between the T1-T0 and T2-T0 stages for group 1-4 ΔE values. A statistically significant (p < 0.001) difference was also found when the T1B-T0 ΔE values of group 3 were compared with the T1-T0 ΔE values of groups 1, 2, and 4. CONCLUSIONS: After coffee-induced enamel discoloration, bleaching of teeth bonded with TRXT produced acceptable color difference of the incisal, middle, and gingival regions of the crown. In teeth bonded with Orthocem, acceptable color difference was seen only in the middle of the crown. CLINICAL RELEVANCE: The presented study will guide the clinician on how enamel discoloration side effect of fixed orthodontic appliance can reduce.

Evaluation of pediatric dentists' knowledge and approaches to tooth discoloration.

In recent years, esthetic expectations have come to the fore in pediatric dentistry, as in every field of dentistry. Therefore, to better meet patients' expectations, the steps taken to determine and improve the current level of knowledge of pediatric dentists on tooth discoloration gain importance. This study aims to measure the knowledge levels of pediatric dentists regarding tooth discoloration. A 33-questioned survey created online was emailed to pediatric dentists between March and December 2021. The first part included four multiple-choice and two open-ended questions regarding demographic characteristics. The second part was to measure the participants' knowledge of tooth discoloration. The last part was to evaluate the clinical approaches of the participants. Participants who agreed to answer all of the questions were included in the study (n = 129). The knowledge levels of the participants were scored according to the accuracy of their answers. The data were statistically analyzed using descriptive statistics and chi-square tests. Of the pediatric dentists who participated in this study, 16.3% had high knowledge, 79.8% had medium knowledge, and 3.9% had insufficient understanding of tooth discoloration. There was no correlation between time since dental school graduation and time spent practicing as a pediatric dentist (p > 0.05). The group with the highest average level of knowledge was the group most frequently encountered with tooth discoloration in the clinic (p ≤ 0.05). On average, pediatric dentists had moderate knowledge of tooth discoloration. The group with the highest average expertise in this field was the group that most frequently encountered and treated tooth discoloration. Information on tooth discoloration due to systemic factors was insufficient. To increase the knowledge level of pediatric dentists about the causes and treatments of tooth discoloration, it may be beneficial to establish training programs during and after specialization education.

Evaluation of Stain Removal Efficacy and Color Stability of Three Different Dentifrices on Artificially Stained Enamel Surface-An In Vitro Study.

AIM: The aim of the present study was to assess the stain removal ability and color stability of three distinct dentifrices on artificially stained enamel surface. MATERIALS AND METHODS: This study included 75 intact, healthy premolars free of dental caries that were extracted during orthodontic therapy. The samples were allowed to dry for 6 hours after being submerged in the prepared tea solution for roughly 18 hours every day. Then this procedure was repeated for seven successive days. All samples were randomly divided into three experimental groups with 25 samples in each group. Group I: control dentifrice, group II: dentifrice containing hydrogen peroxide, group III: dentifrice containing papain and bromelain. A specially designed toothbrushing simulator was used to brush every sample in the relevant group. Using a spectrophotometer and a measurement program, color measurement was evaluated after staining process after 4 weeks and 8 weeks of teeth cleaning. Using a profilometer, the surface roughness values (Ra) were assessed. RESULTS: After 8 weeks of brushing of stained samples, the color stability was better in dentifrice containing hydrogen peroxide (1.14 ± 0.11) followed by dentifrice containing papain and bromelain (1.22 ± 0.08) and control group (1.30 ± 0.09). And after 8 weeks of brushing of stained samples, the surface roughness was more in dentifrice containing hydrogen peroxide (0.237 ± 0.02) followed by dentifrice containing papain and bromelain (0.229 ± 0.13) and control group (0.207 ± 0.05). CONCLUSION: The present study concluded that the dentifrice containing hydrogen peroxide showed a superior whitening effect on the stained enamel surface than dentifrice containing papain and bromelain and control dentifrice. CLINICAL SIGNIFICANCE: The development of various dentifrice products has been greatly aided by the increased demand for an improved esthetic appearance. Teeth's natural color and any external stains that could accumulate on the tooth surface combine to determine a tooth's color. Additionally, the use of whitening dental pastes to remove external stains has grown in favor. With the development of these whitening toothpastes, dentifrices' ability to lessen or eliminate extrinsic dental stains has increased. How to cite this article: Mishra D, Kamath DG, Alagla M, et al. Evaluation of Stain Removal Efficacy and Color Stability of Three Different Dentifrices on Artificially Stained Enamel Surface-An In Vitro Study. J Contemp Dent Pract 2024;25(1):68-71.

Different effects of whitening treatment on natural teeth and teeth treated with Icon resin: an experimental study in vitro.

BACKGROUND: It is quite common for white spots to develop on a tooth, due sometimes to a defective formation of the enamel layer, and sometimes to patches of demineralisation as a result of poor oral hygiene during orthodontic treatment with fixed braces. ICON DMG is currently the only noninvasive treatment for white spots. After a preliminary etching, it infiltrates the enamel, filling the spaces between the prisms with a resinous material that has a refraction coefficient very similar to that of healthy tooth enamel. The aim of this study was to test the efficacy of professional whitening procedures on teeth previously treated with ICON. The study hypothesis was that infiltration with ICON resin creates a barrier capable of preventing the bleaching action of the whitening agent. MATERIALS: White spots were artificially created on one half of the vestibular surface of 12 human teeth, while the other half was protected with a composite adhesive. The white spots were infiltrated with ICON and the protective adhesive was subsequently removed. A professional teeth whitening procedure was then completed on both halves of the teeth. A statistical analysis was performed to compare spectrophotometric recordings obtained before and after the ICON infiltration and teeth whitening procedures. CONCLUSION: The whitening procedure modified the colour of the teeth on the half not infiltrated with ICON (p<0.05), but there was no statistically significant change in colour on the half infiltrated with ICON. The presence of the ICON resin seems to act as a partial barrier to the action of the whitening agent.

Coffee-stained tooth enamel color restoration and surface abrasion with whitening and regular toothpaste.

PURPOSE: To evaluate the effectiveness of whitening toothpaste in restoring tooth color after coffee staining and its potential impact on enamel surfaces compared with regular toothpaste. METHODS: Bovine tooth enamel specimens were prepared and stained with coffee solutions before undergoing brushing simulation with different toothpaste slurries (whitening, regular, reference). For precise evaluation, spectrophotometric measurements were taken at intervals to assess color changes using the CIELAB (Commission Internationale de l'Éclairage Lab*) color space. Additionally, profilometric measurements were taken to determine the impact of toothpaste type on the roughness and abraded depth of the enamel surface. To understand the effects of toothpaste and brushing on color change, surface roughness, and abraded depth, while also considering correlations between these factors, the findings were analyzed using mixed-effects models. RESULTS: The whitening toothpaste group demonstrated the highest recovery rate (71%) after 10,000 brushstrokes, followed by the regular toothpaste group (48%) and the reference slurry group (43%). The mixed-effects model analysis revealed that the reference group had a smaller change in lightness (ΔL) than those in the regular toothpaste group. The whitening toothpaste group showed a greater change in lightness on average than those in the regular toothpaste group, with an increase in lightness as the number of brushstrokes increased. According to the roughness and abraded depth data, the whitening toothpaste group was least affected by brushing, while the reference and regular toothpaste groups showed higher levels of roughness and abraded depth at all intervals. CLINICAL SIGNIFICANCE: Gaining a thorough understanding of the effectiveness of whitening toothpaste and its impact on the enamel surface plays a crucial role in refining toothpaste formulations and advancing tooth whitening techniques in dental care.

Effect of Calcium Hydroxide and Antioxidant Agents Filling the Pulp Chamber after Internal Bleaching.

To evaluate the effect of calcium hydroxide (CH), sodium ascorbate (SA) and sodium thiosulfate (ST) filling the pulp chamber on color stability and longevity of teeth after internal bleaching. Crowns of bovine incisors were submitted to internal bleaching and divided into groups according the material used in the pulp chamber: Control, CH, SA, ST. Each group was divided into two subgroups according to the time to perform restorative procedures (7 or 15 days). Color measurement was performed with a spectrophotometer at nine periods. The darkening (ΔE) values were calculated. The Mann-Whitney test was used to statistically analyze the data (p ⟨ 0.05). After bleaching, ΔE values were higher than 3.5, showing that the procedure was effective. After 24 hours, no difference was observed between groups. After 7 days, SA showed higher ΔE than the control group (p ⟨ 0.05). CH and TS did not differ from the control group. In restorations performed after 7/15 days, SA group showed higher values of darkening after 1 and 4 months than the control group (p ⟨ 0.05). SA induced perceptible darkening after bleaching and should not be used to fill the pulp chamber. ST and CH show color stability and longevity after 12 months.

At-home bleaching versus whitening toothpastes for treatment of tooth discoloration: a cost-effectiveness analysis.

OBJECTIVES: This study aimed to analyze the cost-effectiveness of whitening toothpastes and at-home bleaching for the treatment of tooth discoloration. METHODOLOGY: A cost-effectiveness economic analysis was conducted, and eight randomized clinical trials were selected based on the whitening agent product used: blue covarine dentifrices (BCD), hydrogen peroxide dentifrices (HPD), dentifrices without bleaching agents (CD, negative control), and 10% carbamide peroxide (CP10, positive control) for at-home bleaching. The consumer/patient perspective was adopted, macro-costing techniques were used and a decision tree model was performed considering the costs in the American and Brazilian markets. The color change evaluation (ΔE*ab) was used to calculate the effectiveness of tooth bleaching. A probabilistic analysis was performed using a Monte Carlo simulation and incremental cost-effectiveness ratios were obtained. RESULTS: CP10 resulted in the highest cost-effectiveness compared to the use of dentifrices in both markets. In Brazil, HPD was more cost-effective than BCD and CD. In the US, the increased costs of HPD and BCD did not generate any whitening benefit compared to CD. CONCLUSIONS: CP10 was more cost-effective than BCD and HPD for tooth bleaching from the perspectives of the Brazilian and American markets. Decision-making should consider the use of CP10 for treating tooth discoloration.

Prevention efficacy of dentin tubule sealing with Nd:YAG laser against tooth discoloration induced by vital pulp treatment.

BACKGROUND: The discoloration potential of dental materials and applications such as vital pulp therapy also cause discoloration due to the presence of blood. Dentin tubule sealing methods could be used for the prevention of discoloration. AIM: The purpose of this study was to evaluate the effect of sealing pulp chamber walls with Nd:YAG laser against discoloration caused by tricalcium silicate-based materials in the presence and absence of blood contamination. DESIGN: Eighty-one extracted human maxillary incisors were prepared and randomly divided into nine groups according to the Nd:YAG laser application, the cement to be used (NeoMTA Plus/Biodentine), and the presence or absence of blood. The color measurements were obtained with a spectrophotometer at baseline and then at the sixth (T1) and 12th (T2) months thereafter. RESULTS: Sealing with Nd:YAG laser and placing NeoMTA Plus or Biodentine on human blood significantly increased discoloration at T1 and T2 (p < .05). Similarly, without sealing the cavity and placing NeoMTA Plus or Biodentine on human blood significantly increased discoloration at T1 and T2 (p < .05). CONCLUSION: Regardless of sealing the dentin tubules with Nd:YAG laser, NeoMTA Plus and Biodentine caused more discoloration in the presence of blood contamination.

Investigating the role of chlorogenic acids and coffee type in coffee-induced teeth discoloration.

OBJECTIVE: Coffee is one of the most popular beverages in the world, with millions of people consuming it every day. The effect of coffee on teeth discoloration has long been a concern for both coffee drinkers and dental professionals. To address this concern, this study aimed to investigate the role of chlorogenic acids (CGAs) and the type of coffee in coffee-induced teeth discoloration. MATERIALS AND METHODS: High-performance liquid chromatography with a photodiode array detector was used to determine the CGA contents of instant coffee produced by five manufacturers (Starbucks, Dunkin' Donuts, Kanu, Ediya, Coffee Bean). A total of 180 bovine tooth specimens were immersed in the coffee samples for varying durations (3, 9, 24, 48, and 72 h), and the discoloration levels were measured using a spectrophotometer. A linear mixed-effects model analysis was used to determine the significance of L*, a*, and b* values in relation to the duration of coffee immersion and coffee type. RESULTS: Both immersion time and coffee type had significant effects on tooth discoloration (p < 0.001), with some types of coffee being more strongly associated with tooth discoloration than others. The amount of CGAs present in coffee was found to be positively correlated with the degree of discoloration (p = 0.030). CONCLUSIONS: Prolonged exposure to coffee can exacerbate teeth staining, and different types of coffee can cause varying degrees of discoloration. Furthermore, coffee with higher levels of CGAs may lead to greater tooth discoloration.

Effects of enamel moistening and repositioning guide color on tooth whitening outcomes: A clinical trial.

This clinical trial investigated the effects of pre-application enamel moistening on the impact of a 37% carbamide peroxide whitener on tooth color changes and the influence of repositioning guide colors. Forty participants were randomly assigned to in-office tooth bleaching with either moistened enamel (experimental) or dry enamel (control). The whitener was applied for 45 min over two sessions. Tooth color was visually measured or assessed using a spectrophotometer with purple or green silicone guides. Tooth bleaching was assessed using CIE76 (ΔEab ) and CIEDE2000 (ΔE00 ) formulas and by whitening and bleaching index score changes. Moistening the enamel did not significantly affect tooth color. However, the guide color choice only impacted tooth color when measured instrumentally. At baseline, the green guide resulted in statistically significantly whiter teeth than the purple guide. Less pronounced differences in the b* coordinate between baseline and final measurements were found using the green guide. The green guide also produced lower ΔEab values and less change in indexes. In conclusion, moistening the enamel did not significantly impact tooth color changes. However, the repositioning guide color influenced the tooth bleaching measured instrumentally, except for ΔE00 .