One-Pot Biocatalytic Route from Alkanes to α,ω-Diamines by Whole-Cell Consortia of Engineered Yarrowia lipolytica and Escherichia coli.

Metabolically engineered microbial consortia can contribute as a promising production platform for the supply of polyamide monomers. To date, the biosynthesis of long-chain α,ω-diamines from n-alkanes is challenging because of the inert nature of n-alkanes and the complexity of the overall synthesis pathway. We combined an engineered Yarrowia lipolytica module with Escherichia coli modules to obtain a mixed strain microbial consortium that could catalyze an efficient biotransformation of n-alkanes into corresponding α,ω-diamines. The engineered Y. lipolytica strain was constructed (YALI10) wherein the two genes responsible for ß-oxidation and the five genes responsible for the overoxidation of fatty aldehydes were deleted. This newly constructed YALI10 strain expressing transaminase (TA) could produce 0.2 mM 1,12-dodecanediamine (40.1 mg/L) from 10 mM n-dodecane. The microbial consortia comprising engineered Y. lipolytica strains for the oxidation of n-alkanes (OM) and an E. coli amination module (AM) expressing an aldehyde reductase (AHR) and transaminase (TA) improved the production of 1,12-diamine up to 1.95 mM (391 mg/L) from 10 mM n-dodecane. Finally, combining the E. coli reduction module (RM) expressing a carboxylic acid reductase (CAR) and an sfp phosphopantetheinyl transferase with OM and AM further improved the production of 1,12-diamine by catalyzing the reduction of undesired 1,12-diacids into 1,12-diols, which further undergo amination to give 1,12-diamine as the target product. This newly constructed mixed strain consortium comprising three modules in one pot gave 4.1 mM (41%; 816 mg/L) 1,12-diaminododecane from 10 mM n-dodecane. The whole-cell consortia reported herein present an elegant "greener" alternative for the biosynthesis of various α,ω-diamines (C8, C10, C12, and C14) from corresponding n-alkanes.

Recent advances in microbial production of diamines, aminocarboxylic acids, and diacids as potential platform chemicals and bio-based polyamides monomers.

Recently, bio-based manufacturing processes of value-added platform chemicals and polymers in biorefineries using renewable resources have extensively been developed for sustainable and carbon dioxide (CO2) neutral-based industry. Among them, bio-based diamines, aminocarboxylic acids, and diacids have been used as monomers for the synthesis of polyamides having different carbon numbers and ubiquitous and versatile industrial polymers and also as precursors for further chemical and biological processes to afford valuable chemicals. Until now, these platform bio-chemicals have successfully been produced by biorefinery processes employing enzymes and/or microbial host strains as main catalysts. In this review, we discuss recent advances in bio-based production of diamines, aminocarboxylic acids, and diacids, which has been developed and improved by systems metabolic engineering strategies of microbial consortia and optimization of microbial conversion processes including whole cell bioconversion and direct fermentative production.

Fermentative production of 2-(4-aminophenyl)ethylamine to synthesize a novel heat-resistant biopolyurea.

The aromatic diamine 2-(4-aminophenyl)ethylamine (4APEA) is a potential monomer for polymers and advanced materials. Here, 4APEA was produced by fermentation using genetically engineered Escherichia coli (Masuo et al.2016). Optimizing fed-batch cultures of this strain produced the highest reported yield to date of 4APEA (7.2%; 3.5 g/L versus glucose) within 72 h. Appropriate aeration was important to maximize production and avoid unfavorable 4APEA degradation. Fermented 4APEA was purified from culture medium and polymerized with methylene diphenyldiisocyanate and hexamethylene diisocyanate to produce polyureas PU-1 and PU-2, respectively. The decomposition temperatures for 10% weight loss (Td10) of PU-1 and PU-2 were 276 °C and 302 °C, respectively, and were comparable with that of other thermostable aromatic polyureas. This study is the first to synthesize polyureas from the microbial aromatic diamine. Their excellent thermostability will be useful for the industrial production of heat-resistant polymer materials.

Development of a Transcription Factor-Based Diamine Biosensor in Corynebacterium glutamicum.

Diamines serve as major platform chemicals that can be employed to a variety of industrial scenarios, particularly as monomers for polymer synthesis. High-throughput sensors for diamine biosynthesis can greatly improve the biological production of diamines. Here, we identified and characterized a transcription factor-driven biosensor for putrescine and cadaverine in Corynebacterium glutamicum. The transcriptional TetR-family regulatory protein CgmR (CGL2612) is used for the specific detection of diamine compounds. This study also improved the dynamic range and the sensitivity to putrescine by systematically optimizing genetic components of pSenPut. By a single cell-based screening strategy for a library of CgmR with random mutations, this study obtained the most sensitive variant CgmRI152T, which possessed an experimentally determined limit of detection (LoD) of ≤0.2 mM, a K of 11.4 mM, and a utility of 720. Using this highly sensitive putrescine biosensor pSenPutI152T, we demonstrated that CgmRI152T can be used as a sensor to detect putrescine produced biologically in a C. glutamicum system. This high sensitivity and the range of CgmR will be an influential tool for rewiring metabolic circuits and facilitating the directed evolution of recombinant strains toward the biological synthesis of diamine compounds.

Discovery of 2,4-pyrimidinediamine derivatives as potent dual inhibitors of ALK and HDAC.

Combination of anaplastic lymphoma kinase (ALK) inhibitor with histone deacetylases (HDAC) inhibitor could exert synergistically anti-proliferative effects on ALK positive non-small cell lung cancer (NSCLC) naïve or resistant cells. In this work, we designed and synthesized a series of 2,4-pyrimidinediamine derivatives as dual ALK and HDAC inhibitors based on pharmacophore merged strategy. Among which, compound 10f displayed the most potent and balanced inhibitory activity against ALK (IC50 = 2.1 nM) and HDAC1 (IC50 = 7.9 nM), respectively. In particular, 10f was also potent against the frequently observed Crizotinib-resistant ALKL1196M (IC50 = 1.7 nM) as well as the Ceritinib-resistant ALKG1202R (IC50 = 0.4 nM) mutants. In antiproliferative activity assay, 10f exhibited impressive activity on ALK-addicted cancer cell lines at low micromole concentrations, which was comparable to that of Crizotinib and Ceritinib. Further flow cytometric analysis indicated that 10f could effectively induce cell death via cell apoptosis and cell cycle arrest. Taken together, these results suggested 10f would be a promising lead compound for the ALK-positive NSCLC treatment, especially the Ceritinib- or Crizotinib-resistant NSCLC.

Activation of palindromes on a degradable modular grafting probe enables ultrasensitive detection of microRNAs.

This work describes a single-stranded degradable modular grafting probe for analyzing microRNA-21. In the system, the exonuclease activity of phi29 polymerase restrains the SYBR Green I/ssDNA induced background. The palindrome activation caused remarkable target fluorescence. The detection limit was achieved as 0.26 fM, showing potential in biochemical analysis.

Development of a pair of real-time loop mediated isothermal amplification assays for detection of Yersinia pestis, the causative agent of plague.

Yersinia pestis, the causative agent of plague mainly infects rodents, while humans are the accidental host. The conventional diagnostic methods available for Y. pestis exhibit cross-reactivity with other enteropathogenic bacteria which makes its detection difficult. Rapid and reliable point-of-care detection of Y. pestis is essential for timely initiation of medical treatment. In the present study, a pair of loop mediated isothermal amplification (LAMP) assays has been developed for rapid detection of Y. pestis. Two sets of LAMP primers, each containing 6 primers were specifically designed targeting caf1 and 3a genes located on pFra plasmid and chromosome of Y. pestis, respectively. Isothermal amplification was accomplished at 65 °C for 40 min for caf1 target, and at 63 °C for 50 min for 3a choromosomal target. The analytical sensitivity of the assay for the caf1 and 3a targets was found to be 500 fg and 100 fg genomic DNA of Y. pestis, respectively. The caf1 and 3a LAMP assays detected as few as 100 copies of caf1 and 10 copies of 3a gene targets harboured in the respective recombinant plasmids. The amplified products were detected visually under visible and UV light using SYBR Green 1 dye. The assay pair was found to be highly specific as it did not cross-react with closely related and other bacterial species.

Design and Optimization of an Acyclic Amine Series of TRPV4 Antagonists by Electronic Modulation of Hydrogen Bond Interactions.

Investigation of TRPV4 as a potential target for the treatment of pulmonary edema associated with heart failure generated a novel series of acyclic amine inhibitors displaying exceptional potency and PK properties. The series arose through a scaffold hopping approach, which relied on use of an internal H-bond to replace a saturated heterocyclic ring. Optimization of the lead through investigation of both aryl regions revealed approaches to increase potency through substituents believed to enhance separate intramolecular and intermolecular H-bond interactions. A proposed internal H-bond between the amine and neighboring benzenesulfonamide was stabilized by electronically modulating the benzenesulfonamide. In the aryl ether moiety, substituents para to the nitrile demonstrated an electronic effect on TRPV4 recognition. Finally, the acyclic amines inactivated CYP3A4 and this liability was addressed by modifications that sterically preclude formation of a putative metabolic intermediate complex to deliver advanced TRPV4 antagonists as leads for discovery of novel medicines.

Establishment of a duplex SYBR green I-based real-time polymerase chain reaction assay for the rapid detection of canine circovirus and canine astrovirus.

The similar clinical characteristics of canine circovirus (CaCV) and canine astrovirus (CaAstV) infections and high frequency of co-infection make diagnosis difficult. In this study, a duplex SYBR Green I-based real-time polymerase chain reaction (PCR) assay was established for the rapid, simultaneous detection of CaCV and CaAstV. Two pairs of specific primers were designed based on the Rep gene of CaCV and the Cap gene of CaAstV. By using the real-time PCR assay method, the two viruses can be distinguished by the difference in melting temperatures, 79 °C and 86 °C for CaCV and CaAstV, respectively. This assay had high specificity, showing no cross-reaction with other common canine viruses, as well as high sensitivity, with minimum detection limits of 9.25 × 101 copies/µL and 6.15 × 101 copies/µL for CaCV and CaAstV, respectively. Based on the mean coefficient of variation, the method had good reproducibility and reliability. In a clinical test of 57 fecal samples, the rates of positive detection by real-time PCR were 14.04% (8/57) and 12.28% (7/57) for CaCV and CaAstV, respectively, and the rate of co-infection was 8.77% (5/57). In conclusion, the newly established duplex SYBR Green I-based real-time PCR assay is sensitive, specific, reliable, and rapid and is an effective tool for the detection of co-infections with CaCV and CaAstV.

Diamine Biosynthesis: Research Progress and Application Prospects.

Diamines are important monomers for polyamide plastics; they include 1,3-diaminopropane, 1,4-diaminobutane, 1,5-diaminopentane, and 1,6-diaminohexane, among others. With increasing attention on environmental problems and green sustainable development, utilizing renewable raw materials for the synthesis of diamines is crucial for the establishment of a sustainable plastics industry. Recently, high-performance microbial factories, such as Escherichia coli and Corynebacterium glutamicum, have been widely used in the production of diamines. In particular, several synthetic pathways of 1,6-diaminohexane have been proposed based on glutamate or adipic acid. Here, we reviewed approaches for the biosynthesis of diamines, including metabolic engineering and biocatalysis, and the application of bio-based diamines in nylon materials. The related challenges and opportunities in the development of renewable bio-based diamines and nylon materials are also discussed.

CDC20 inhibitor Apcin inhibits embryo implantation in vivo and in vitro.

For successful implantation, endometrial receptivity must be established. The high expression of CDC20 in many kinds of malignant tumours has been reported, and it is related to the occurrence and development of tumours. According to these functions, we think that CDC20 may also play important roles in the process of embryo implantation. To prove our hypothesis, we observed the distribution and expression of CDC20 in mouse and human early pregnancy. The effect of E2 and/or P4 on the expression of CDC20 in human endometrial cells was detected by Western blot. To further explore whether CDC20 is an important factor in adhesion and proliferation. The results showed that the expression of CDC20 in the uterus and menstrual cycle of early pregnant mice was spatiotemporal. E2 can promote the expression of CDC20. On the contrary, P4 and E2 + P4 inhibited the expression of CDC20. We also detected the proliferation and adhesion of human endometrial cells. We found that the inhibition of CDC20 with its inhibitor Apcin could reduce the adhesion rate and proliferation ability to RL95-2 and HEC-1A cells, respectively. Inhibiting CDC20 by Apcin could interfere the embryo implantation of mouse. It is suggested that CDC20 may play an important role in the process of embryo implantation. SIGNIFICANCE OF THE STUDY: Embryo implantation is an extremely complex and delicate process, including identification, localisation, adhesion and invasion between embryo and endometrium. Studies have shown the process of embryo implantation is very similar to that of tumour invasion. CDC20 is a cancer-promoting factor. We found CDC20 is spatially and spatially expressed in mouse and human menstrual cycles and is regulated by oestrogen and progesterone. Apcin can inhibit the adhesion of JAR cells and embryo implantation of mouse. CDC20 may provide a new way to improve the success rate of assisted reproduction.

Discovery of a Dual Tubulin Polymerization and Cell Division Cycle 20 Homologue Inhibitor via Structural Modification on Apcin.

Apcin is one of the few compounds that have been previously reported as a Cdc20 specific inhibitor, although Cdc20 is a very promising drug target. We reported here the design, synthesis, and biological evaluations of 2,2,2-trichloro-1-aryl carbamate derivatives as Cdc20 inhibitors. Among these derivatives, compound 9f was much more efficient than the positive compound apcin in inhibiting cancer cell growth, but it had approximately the same binding affinity with apcin in SPR assays. It is possible that another mechanism of action might exist. Further evidence demonstrated that compound 9f also inhibited tubulin polymerization, disorganized the microtubule network, and blocked the cell cycle at the M phase with changes in the expression of cyclins. Thus, it induced apoptosis through the activation of caspase-3 and PARP. In addition, compound 9f inhibited cell migration and invasion in a concentration-dependent manner. These results provide guidance for developing the current series as potential new anticancer therapeutics.

Simultaneous differentiation and diagnosis of goose parvovirus and astrovirus in clinical samples with duplex SYBR Green I real-time PCR.

Two pairs of primers were designed to bind conserved genomic regions of goose parvovirus (GPV) and goose astrovirus (GAstV) to establish a simple, sensitive, and highly specific duplex quantitative PCR (qPCR) method to simultaneously detect the two viruses. The duplex qPCR can distinguish GPV (melting point: 82.1 °C) and GAstV (melting point: 79.8 °C) by the peaks of their individual melting curves. Mixed testing with other waterfowl viruses produced no nonspecific peaks. The established standard curves showed good linear relationships (R2 > 0.997) and the limits of detection (LOD) for GPV and GAstV were 5.74 × 101 and 6.58 × 101 copies/µL, respectively. Both intra- and inter-assay coefficients of variation were <2%, indicating that the method has good repeatability. Twenty tissue samples from diseased geese were examined with the duplex qPCR assay and conventional PCR. Duplex qPCR showed positive rates of 25% for GPV and 45% for GAstV, and the positive rate for GPV and GAstV coinfection was 15%, slightly higher than the results for conventional PCR. These results indicated that this duplex qPCR method is highly sensitive, specific, and reproducible, and is suitable for epidemiological studies to effectively control the transmission of GPV and GAstV.

Inhibitors of tri- and tetra- polyamine oxidation, but not diamine oxidation, impair the initial stages of wound-induced suberization.

The mechanisms regulating, and modulating potato wound-healing processes are of great importance in reducing tuber infections, reducing shrinkage and maintaining quality and nutritional value for growers and consumers. Wound-induced changes in tuber polyamine metabolism have been linked to the modulation of wound healing (WH) and in possibly providing the crucial amount of H2O2 required for suberization processes. In this investigation we determined the effect of inhibition of specific steps within the pathway of polyamine metabolism on polyamine content and the initial accumulation of suberin polyphenolics (SPP) during WH. The accumulation of SPP represents a critical part of the beginning or inchoate phase of tuber WH during closing-layer formation because it serves as a barrier to bacterial infection and is a requisite for the accumulation of suberin polyaliphatics which provide the barrier to fungal infection. Results showed that the inhibitor treatments that caused changes in polyamine content generally did not influence wound-induced accumulation of SPP. Such lack of correlation was found for inhibitors involved in metabolism and oxidation of putrescine (arginine decarboxylase, ornithine decarboxylase, and diamine oxidase). However, accumulation of SPP was dramatically reduced by treatment with guazatine, a potent inhibitor of polyamine oxidase (PAO), and methylglyoxal-bis(guanylhydrazone), a putative inhibitor of S-adenosylmethione decarboxylase which may also cross-react to inhibit PAO. The mode of action of these inhibitors is presumed to be blockage of essential H2O2 production within the WH cell wall. These results are of great importance in understanding the mechanisms modulating WH and ultimately controlling related infections and associated postharvest losses.

Engineering siderophores.

Siderophores have important functions for bacteria in iron acquisition and as virulence factors. In this chapter we will discuss the engineering of cyclic hydroxamate siderophores by various biochemical approaches based on the example of Shewanella algae. The marine gamma-proteobacterium S. algae produces three different cyclic hydroxamate siderophores as metabolites via a single biosynthetic gene cluster and one of them is an important key player in interspecies competition blocking swarming of Vibrio alginolyticus. AvbD is the key metabolic enzyme assembling the precursors into three different core structures and hence an interesting target for metabolic and biochemical engineering. Synthetic natural and unnatural precursors can be converted in vitro with purified AvbD to generate siderophores with various ring sizes ranging from analytical to milligram scale. These engineered siderophores can be applied, for example, as swarming inhibitors against V. alginolyticus. Here, we describe the synthesis of the natural and unnatural siderophore precursors HS[X]A and provide our detailed protocols for protein expression of AvbD, conversion of HS[X]A with the enzyme to produce ring-size engineered siderophores and secondly for a biosynthetic feeding strategy that allows to extract engineered siderophores in the milligram scale.

Diaminated Starch: A Competitor of Chitosan with Highly Mucoadhesive Properties due to Increased Local Cationic Charge Density.

The purpose of this study was to synthesize diaminated starch as a novel mucoadhesive polymer. Starch was tosylated and then reacted with ethylenediamine. The degree of amination was determined by 2,4,6-trinitrobenzene sulfonic acid assay. Properties of diaminated starch including solubility, cytotoxicity, swelling behavior, and mucoadhesion were compared to chitosan. Diaminated starch displayed 2083 ± 121.6 µmol of diamine substructures/g of polymer. At pH 6, diaminated starch exhibited a ζ potential of 6 mV, whereas it was close to zero in the case of unmodified starch. In addition, diaminated starch displayed water solubility over the entire pH range and minor cytotoxicity. The novel polymer showed pronounced swelling behavior in water increasing its initial weight 18- and 6-fold at pH 5 and 6, respectively. Moreover, diaminated starch exhibited 92-fold higher-mucoadhesivity properties than those of chitosan. According to these results, diaminated starch might be a promising novel excipient for the design of mucoadhesive formulations.

One-Pot Biocatalytic Transformation of Adipic Acid to 6-Aminocaproic Acid and 1,6-Hexamethylenediamine Using Carboxylic Acid Reductases and Transaminases.

Production of platform chemicals from renewable feedstocks is becoming increasingly important due to concerns on environmental contamination, climate change, and depletion of fossil fuels. Adipic acid (AA), 6-aminocaproic acid (6-ACA) and 1,6-hexamethylenediamine (HMD) are key precursors for nylon synthesis, which are currently produced primarily from petroleum-based feedstocks. In recent years, the biosynthesis of adipic acid from renewable feedstocks has been demonstrated using both bacterial and yeast cells. Here we report the biocatalytic conversion/transformation of AA to 6-ACA and HMD by carboxylic acid reductases (CARs) and transaminases (TAs), which involves two rounds (cascades) of reduction/amination reactions (AA → 6-ACA → HMD). Using purified wild type CARs and TAs supplemented with cofactor regenerating systems for ATP, NADPH, and amine donor, we established a one-pot enzyme cascade catalyzing up to 95% conversion of AA to 6-ACA. To increase the cascade activity for the transformation of 6-ACA to HMD, we determined the crystal structure of the CAR substrate-binding domain in complex with AMP and succinate and engineered three mutant CARs with enhanced activity against 6-ACA. In combination with TAs, the CAR L342E protein showed 50-75% conversion of 6-ACA to HMD. For the transformation of AA to HMD (via 6-ACA), the wild type CAR was combined with the L342E variant and two different TAs resulting in up to 30% conversion to HMD and 70% to 6-ACA. Our results highlight the suitability of CARs and TAs for several rounds of reduction/amination reactions in one-pot cascade systems and their potential for the biobased synthesis of terminal amines.

Metabolic engineering for the production of dicarboxylic acids and diamines.

Microbial production of chemicals and materials from renewable carbon sources is becoming increasingly important to help establish sustainable chemical industry. In this paper, we review current status of metabolic engineering for the bio-based production of linear and saturated dicarboxylic acids and diamines, important platform chemicals used in various industrial applications, especially as monomers for polymer synthesis. Strategies for the bio-based production of various dicarboxylic acids having different carbon numbers including malonic acid (C3), succinic acid (C4), glutaric acid (C5), adipic acid (C6), pimelic acid (C7), suberic acid (C8), azelaic acid (C9), sebacic acid (C10), undecanedioic acid (C11), dodecanedioic acid (C12), brassylic acid (C13), tetradecanedioic acid (C14), and pentadecanedioic acid (C15) are reviewed. Also, strategies for the bio-based production of diamines of different carbon numbers including 1,3-diaminopropane (C3), putrescine (1,4-diaminobutane; C4), cadaverine (1,5-diaminopentane; C5), 1,6-diaminohexane (C6), 1,8-diaminoctane (C8), 1,10-diaminodecane (C10), 1,12-diaminododecane (C12), and 1,14-diaminotetradecane (C14) are revisited. Finally, future challenges are discussed towards more efficient production and commercialization of bio-based dicarboxylic acids and diamines.

Nanochannels of Covalent Organic Frameworks for Chiral Selective Transmembrane Transport of Amino Acids.

Mimicking cellular transport mechanisms to make solid-state smart nanochannels has long been of great interest for their diverse applications, but it poses a critical synthetic challenge. Covalent organic frameworks (COFs) are porous crystalline materials with tailor-made nanochannels and hold great potential for ion and molecule transport. We demonstrate here for the first time that 2D COFs possess the necessary merits to be promising solid-state nanochannels for selective transport of amino acids, which are the basis for life. By imine condensations of a C3-symmetric trialdehyde and a mixture of diamines with and without divinyl groups, two vinyl-functionalized 2D COFs are crystallized. Both multivariant COFs afford straight 1D mesoporous channels formed by AA or AB stacking of layered hexagonal networks. After postmodification with chiral ß-cyclodextrin (ß-CD) via thiol-ene click reactions, the COFs are further fabricated into free-standing mixed matrix membranes (MMMs) that can selectively transport amino acids, as revealed by monitoring not only transmembrane ionic current signature but also concentration changes of permeated substrates. Specially, in the membrane system, the AA stacked COF exhibits higher chiral recognition capability toward histidine enantiomers than the AB stacked COF because of its uniform open channels decorated with ß-CD. This work highlights the great potential of COF nanochannels as a platform for accumulating functional groups for selective transport of small molecules and even biomolecules in the solid state.

Diacetyl Hexamethylene Diamine (CAHB) Exerts Pro-Apoptotic and Anti-Proliferative Function in Leukemic T Lymphocytes via Downregulating PI3K/Akt Signaling.

BACKGROUND T cell acute lymphoblastic leukemia (T-ALL) is an aggressive hematologic malignancy caused by abnormal proliferation of immature T cell progenitors. Chemotherapy of T-ALL usually consists of induction, consolidation, and long-term maintenance. Diacetyl hexamethylene diamine (CAHB) is a newly developed agent that induces the differentiation of malignant cells and deprives their clonal growth ability. Since its effect on T-ALL has not been previously determined, we evaluated its potential function in the Jurkat cell line. MATERIAL AND METHODS MTT assay was conducted to evaluate the cytotoxicity and anti-proliferative effect of CAHB. The apoptosis level of CAHB-treated Jurkat cells was evaluated using flow cytometry via staining with Annexin V/PI or cleaved-caspase-3. The alteration of mitochondrial membrane potential was determined by flow cytometry. The expression of Bax and Bcl-2 was evaluated by RT-PCR and Western blot. Western blot was also used to assess the activation of Akt. RESULTS CAHB inhibited the proliferation and promoted the apoptosis of Jurkat cells in a time- and dose-dependent manner by decreasing activation of Akt, reducing the mitochondrial membrane potential, and downregulating the Bcl-2/Bax ratio. CONCLUSIONS Our data suggest that CAHB might be regarded as a novel treatment agent for T-ALL since it can induce apoptosis and inhibit proliferation of the T-ALL cell line at a relatively low level.